Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 142/314 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Remote Desktop connection repeatedly aborting

  - by DerKlaus

  I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

  Read the article

• How can I prevent my domain controller doing forward lookups for remote users?

  - by markmnl

  I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do an nslookup or simply browse the web the DNS from the VPN provides the DNS answers. I believe this is because it has DNS forwarders, so queries it can't answer are forwarded and then it relays the answer. This is the desired behavior for workstations in the office (they should query their domain controller first); however for remote VPN users this is not desirable. I do not want my remote office's server to answer DNS queries it is not the authority of (which happens to be 192.168.x.x). Is there any way I can configure this?

  Read the article

• Share the DVB card on windows 7

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• How can i resolve all external addresses to internal address?

  - by Darian

  I am currently setting up a Linux server for a WIFI access-point. When ever someone who is connected to the hotspot/access-point? tries to reload a page they get forced onto the one page. Note: this wont have internet access! ie: user tries accessing www.google.com = it returns 192.168.1.200 or example.domain I've read that "dnsmasq" can be used to redirect any external addresses to an internal address. but haven't had any luck. Anyone have an example of a config for "dnsmasq"? I have also read that this can be done through a proxy?

  Read the article

• Cannot Get Sound Over HDMI in Windows 7

  - by Aayush

  Windows 7 has been really good to me, I never needed to install any drivers & that included sound. Win7 took care of all that, but because of that I don't have any extra controls. Just the native Windows sound controls. I connected my LCD and PC using the HDMI, works great with video but the sound seems to stick with the PC speakers. My friend somehow solved this in Vista, but to port the sound to the LCD, he always had to restart the computer, which I found really weird and never made me interested to even know how he did that. There has to be way to do this easily. Please let me know if anyone else had the same problem & solved it somehow. Thanks!

  Read the article

• Tool to fix video that's out of sync with audio?

  - by Javier Badia

  I'm looking for (preferably free) software for Windows 7 that will allow me to fix an AVI file that has audio out of sync with the video. I tried with Windows Live Movie Maker and VirtualDub and couldn't find out how to do it (if at all possible) on both of them. If any of those can help me, instructions for that would also be nice. Background: I have a RCA-to-USB capture card, which I'm using to transfer VHS casettes and stuff from a video camera to digital format. The problem is that the audio comes out heavily distorted. So instead I connected the audio out from the VCR directly to the computer's line in. This works, but the audio is out of sync, about half a second behind the video. I could spend time trying to fix this issuee, but I think it'll be easier to simply fix the video.

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Lock screen keeps making sound when screen is off

  - by row1

  I have my laptop (Asus UL20FT) on external power and hooked up to an external monitor. I keep the laptop lid closed and am using the 'second screen only' option. If you leave it on the lock screen for a short period of time the screen powers off. While the screen is off it keeps repeating a "duuuh duh duh" sound (sounds just like the device plugged in sound). The monitor is connected via HDMI and I have Microsoft and Logitech wireless USB dongles plugged in. How can I prevent this sound loop?

  Read the article

• Bug in CDP implementation

  - by Suraj

  We are developing a Linux based ethernet switch which has 6 ports. We are done with CDP protocol. I have connected a Cisco device to port 2. When I quiery for the Cisco device, I get the reply and instead of getting lan1 (port 1 - lan0 .. port 6 = lan5), I always get the interface name as eth0. The same is the case for all the ports. What changes are required to get the correct interface name? I will be very thankful for the information. The snap packet is received in the routine snap_rcv() in the file "linux._2.6.XX/net/802/psnap.c"; Regards, Suraj..

  Read the article

• Problem Adding Windows 7 64-bit print drivers to 32-bit Windows 2003 Print Server

  - by Richard West

  I have installed the final RTM version of Windows 7 professional 64 bit on a test system before we begin the roll out in our company. I'm having problems connecting to several HP printers that we have on the network. These printers are being shared from a Windows 2003 server host. I have downloaded the lastest HP Universal Printer dirver, however I'm unable to add the 64 bit driver onto the 2003 server system (it's 32 bit). Does anyone have any advice on how I can get connected to these printers from the Windows 7 system?

  Read the article

• Starting and stopping X11 and LXDE from command line

  - by Radian

  I have a Raspberry Pi with Debian Wheezy (Raspbian) and so far I've managed to learn quite a lot about Linux just playing around, but I have a few questions for all you seasoned Linux pros out there. 1) From command line, if I execute startx, X11 will launch followed by LXDE. If I had a monitor connected, I'm imagining I would see a transition from command line to the desktop environment. Can I launch X11 first with x, then start LXDE on top of X11 afterwards with /etc/init.d/lxdm start (is this correct?) and get to the same result as startx? 2) Instead, let's say I executed /etc/init.d/lxdm start alone, would X11 start automatically (since LXDE relies on X11)? 3) From desktop, if I CTRL+ALT+F1 to get back to command line, then I should be able to shutdown LXDE using /etc/init.d/lxdm stop. Does X11 automatically close with the termination of LXDE? 4) What is the proper/safe way to shutdown X11? Thanks

  Read the article

• X-FI optical output not being recognized.

  - by Luciano

  Hello there! I have an issue and I don't know what to do! I have a SoundBlaster X-FI Xtreme Gamer, which has a spdif mini-optical output. I have it connected to a home theater, via a toslink cable and an adapter to fit in the mini plug. It used to work perfectly, but now it doesn't anymore. There is light travelling through the cable, but the HT doesn't pick up the signal. The sound card of the motherboard also has an optical output (regular, not mini) and it works ok, so the cable and the HT are fine, I think. What else should I try? Thanks, Luciano. PS: I only enabled the onboard card for testing, but usually it's disabled to avoid any kind of conflicts. PPS: I'm using Windows 7 64bit with latest drivers of everything, but like I said. It used to work.

  Read the article

• Internet not working on a VirtualBox Linux machine

  - by mtahmed

  I installed VirtualBox on a Windows 7 PC and installed Xubuntu (Ubuntu with XFCE) on it. Now on the Windows, I am connected to the internet through a LAN which automatically authenticates to connect to the network(because its my work computer). I have also installed the guest additions on this virtual machine (Xubuntu). I tried both NAT and bridging to set up internet connection but I still cannot connect to the internet. For NAT: The browser doesn't say website not found but it keeps trying to load it forever and the network status monitor (the one provided by VirtualBox) doesn't show any green light (no incoming packets). For Bridging: Same as for NAT but the network status monitor shows incoming packets and outgoing packets. But internet still doesn't work. I tried a lot of different things but none worked.

  Read the article

• Is it possible to interrupt or cancel the trash-delete process?

  - by pete

  I am connected to the company server, onsite not remote, which is Windows based. When, in the OS finder, I go to delete a file or directory that resides on the window-based server, the trash progress panel appears as usual. Not infrequently it will just hang there appearing to be active but no progress occurs on the progress bar. So the X is chosen to stop or cancel the process. A new panel appears, and while appearing to be active, again, just hangs there indefinitely. My lack of reputation prevents posting a screen shot - sorry. The question then is this: Is there a way via the Activity Monitor, Terminal, etc. to interrupt this deleting process in the Mac OS? Currently, I have to force shutdown and reboot to eradicate the ever-deleting panel. Finder relaunch does not solve and only eliminates the finder until I force reboot. Any assistance is appreciated. Thanks, Pete iMac, Mac OS X (10.6.8), i7-2.8ghz, 8gb ram

  Read the article

• 1080p playback on external monitor

  - by xibalban

  My system (netbook) specs: 1.6 GHz dual core atom N2600 2 GB DDR3 RAM Integrated GMA3600 GPU Win 7 Professional 32 Bit Daum Pot Player V-1.5 The issue: I downloaded a 1.33 GB sized 1920 x 1080 HD documentary (file extension: mp4) and it plays without a hitch using pot player. However, when I connected an external display (an LED Full HD 24" monitor) using D-Sub, the video plays fine but the player controls become very unresponsive. For instance, it takes about 40 seconds to exit full screen while playing. I tried: Installed/updated all the latest monitor drivers Updated the VGA drivers for GMA3600 No other programs ran while the video played, with most unwanted services and background processes disabled/killed. CPU usage goes only up to 49% when the video plays Question: What may I do in order to improve the player response/video playback experience? Do I need to play with (or change) Pot Player's default video decoders, etc?

  Read the article

• What's the simplest configuration of SVN on a Windows Server to avoid plain text password storage?

  - by detly

  I have an SVN 1.6 server running on a Windows Server 2003 machine, served via CollabNet's svnserve running as a service (using the svn protocol). I would like to avoid storing passwords in plain text on the server. Unfortunately, the default configuration and SASL with DIGEST-MD5 both require plain text password storage. What is the simplest possible way to avoid storing passwords in plain text? My constraints are: Path-based access control to the SVN repository needs to be possible (currently I can use an authz file). As far as I know, this is more-or-less independent of the authentication method. Active directory is available, but it's not just domain-connected windows machines that need to authenticate: workgroup PCs, Linux PCs and software that uses PySVN to perform SVN operations all need to be able to access the repositories. Upgrading the SVN server is feasible, as is installing additional software.

  Read the article

• How to backup in Fedora-13?

  - by Ramy

  I just bought a 1.5T HDD and a disk enclosure. I connected this disk to my laptop via the provided USB cable. I then used the following command: rsync -r -t -v --progress --delete -c -l -z / /media/C4E41A11E41A0678/Moonface_BKP/ I ran this for a long (long long) time when i noticed that what had been backed up to the HDD began to be backed up. In other words, when i ran the command, it created a /media directory and a C4... directory below that and kept recursively backing up this directory (since, I suppose, I was backing up the hard drive itself, too). So...what's the proper way to use rsync?

  Read the article

• Operation System Clone from a Motherboard to Another

  - by Devian

  Lately we had an idea with my Family of building a Super Computer from Scratch. So while we were planning on building our setup, one idea came to my head that it seems possible but i want also your opinions. Lets say that we have 2 ATX Motherboards and 1 MicroATX. Motherboard Setup: 1x ASUS Rampage Extreme Black Edition 1x Intel Core i7 4960x 4x GTX Titan 8x 8GB 1866 Ram Motherboard Setup: 1x SuperMicro X9DRG-QF 2x Intel Xeon E7-8890V2 1x nVIDIA QUADRO K6000 4x nVIDIA Tesla K40 128 GB 1866 Ram And imagine a Solid State Drive with a Switch connected to both of the MotherBoards Can i edit & copy all the data of The first motherboard's RAM to The Other's to be able to continue operating my current Operation System after switching the SSD to the Second Motherboard, from the Second MotherBoard and vice versa? Les say my "Switch Application" modifies everything the Kernel needs to believe nothing happend and continuing its operation from the same point the first motherboard stopped. (Changes on the Device List, CPU Cores, Drivers... etc)

  Read the article

• Windows 7 - swap file on a USB disk? [closed]

  - by Sara Cohen

  Possible Duplicate: How to move the page file to another physical disk location Windows 7 I was given temporarily a PC, running Windows 7 Ultimate. The problem is it's hard drive is full, there are like 250 MB free. The swap file is set to none. It has 4 GB RAM. When I load a few tabs in Chrome or IE and start a game it runs out of memory. I already emptied Recycle Bin, %temp%, etc. Deleting/moving user files or adding RAM is not an option. Now I have a USB 3 7200 RPM drive, it's connected to a USB 3 port and is really fast. Is there a way to create a swap file on that drive?

  Read the article

• Applications don't see mapped network drive after waking from sleep

  - by Chris

  I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

  Read the article

• How can I scan documents from a Lexmark x543n over the network on OS X 10.6

  - by Thomas Lötzer

  Hi, I just got a Lexmark x543dn and have some trouble getting my computer to recognize it as a scanner. The printer is working fine from my OS X 10.6 machine, setup was as easy as it gets. I just connected it to my network, gave it a name and added it under that name as a networked printer in OS X. According to the Apple support website, the driver in OS X (I upgraded to the newest drivers already) should also provide scanning capabilities. However when I run the image capture app included in OS X it tells me that there are no scanners available. Can anybody tell me what I have to do to get OS X to recognize the scanner? Thanks, Thomas

  Read the article

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• How to share a USB modem?

  - by allenskd

  Usually I wouldn't have this problem if it was a dsl modem or cable modem but it's really been difficult for me to share this little modem to other computers. Right now I have my laptop connected to a hub, both computers are in the same workgroup and I have "share this computer internet to other computers"... etc. Problem is, I don't know what is currently happening... I'm hoping someone would guide me, I have googled and some people have been successful at sharing the connection but it seems I'm missing something =/ Let me know if you need any details, thanks

  Read the article

• change ip address verizon fios [closed]

  - by John Smith

  One well documented way to change a dynamically assigned ip address is to log into the router configuration settings and change the mac address , disconnect the router and modem, and to turn it all back on. This actually worked with a basic modem connected by ethernet directly to a laptop, spoofing laptop mac address, with a cable internet provider. Now this question is specific to fiber optic internet providers who bundle with tv and internet (verizon fios, comcast xfinity). Verizon fios installation comes with an actiontec router, and there is a built in way to clone the mac address in the router configuration settings. What will happen if the mac address changes from what verizon installed it as? Will they get angry and disconnect service? Will other services other than internet stop working (tv or phone)?

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >