more details - Page 142

Reconstructing the disk order in RAID 6 with 7 disks

- by rkotulla

a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

Read the article

What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

- by Tegeril

Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

Read the article

I am getting a 400 Bad Request error when using Nginx and PHP-FPM, why?

- by Bob

I am trying to run a website (that requires PHP - it technically doesn't require MySQL at this time, but it may sometime in the near future as I continue developing it, so I went ahead and installed that as well) using nginx 1.2.4 and PHP-FPM 5.3.3 on Ubuntu 12.04.1 LTS. As far as I know, I haven't done anything wrong, but clearly something is not quite right - I seem to be getting a 400 Bad Request error whenever I try to browse to my website. I've been mostly following one guide, and I've done more or less everything it recommends, except for not setting up PHP-FPM to use a Unix Socket and I used service as opposed to /etc/init.d/ when starting/stopping nginx, PHP, and MySQL. Anyways, here are my relevant configuration files (I have only censored personal/sensitive details, like my domain name - which contains my real name): /etc/nginx/nginx.conf user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 15; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/sites-enabled/subdomain.mydomain.net server { listen 80; # listen for IPv4 listen [::]:80; # listen for IPv6 server_name www.subdomain.mydomain.net subdomain.mydomain.net; access_log /srv/www/subdomain.mydomain.net/logs/access.log; error_log /srv/www/subdomain.mydomain.net/logs/error.log; location / { root /srv/www/subdomain.mydomain.net/public; index index.php; } location ~ \.php$ { try_files $uri =400; include fastcgi_params; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/subdomain.mydomain.net/public$fastcgi_script_name; } } All the directories listed in the configuration files above are correct on my server (to the extent of my knowledge). I have not included /etc/php5/fpm/pool.d/www.conf or /etc/php5/fpm/php.ini in this post as they're rather long, but I have posted them on Pastebin: http://pastebin.com/ensErJD8 and http://pastebin.com/T23dt7vM, respectively. Although, the only thing I've changed in either of the two files was in php.ini, where I set expose_php to off so as to hide the .php file extension from users. What can I do to resolve my issue? Please let me know if I need to supply any additional details.

Read the article

How to export SQL Server data from corrupted database (with disk write error)

- by damitamit

IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit Results of DBBC CheckDB: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 7928, Level 16, State 1, Line 1 The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. Msg 5030, Level 16, State 12, Line 1 The database could not be exclusively locked to perform the operation. Msg 7926, Level 16, State 1, Line 1 Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details. Msg 823, Level 24, State 3, Line 1 The operating system returned error 1(error not found) to SQL Server during a write at offset 0x00000674706000 in file 'G:\AX40_Dynamics_Live.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.

Read the article

Connecting PC to TV via HDMI/DVI: Windows XP doesn't allow the appropriate screen resolution

- by Jørgen

I have a computer that is connected to the living room TV (a Panasonic) via HDMI. There is no other monitor connected. My problem is that the computer, which is running Windows XP, does not allow me to set the proper resolution for the TV. Both the graphics adapter and the TV should support the 1280x720 resolution, but it cannot be selected - the only available options are 1280x600 and 800x600, both in the "native" Windows dialog box and the custom Intel graphics options dialog box. Do anyone have a suggestion for a solution for this? Things I've thought of: Setting the resolution directly in the registry (where?) Installing some "custom" monitor driver (the TV manufacturer does not appear to provide any, currently the "generic" one is used) Details on the setup: Connection: DVI output on the computer via a passive DVI-HDMI adapter to the HDMI input on the TV, audio is run on a separate link, the TV is able to combine video and audio without any problem, the problem is there regardless of whether or not the audio is connected. The connection is several meters long through some walls, for this reason using a VGA cable instead is not an option. Note that the report explicitly says that the TV supports 1280x720. Still, I am not allowed to select it in Graphics Options, only 1280x600 and 800x600 is available. For 800x600, there's a lot of black around the edges; for 1280x600, the screen is "zoomed" so the edges of the monitor image (like the taskbar) is not visible. Other: The computer is running Windows XP. More recent versions of Windows are not an option (I have no licence). Linux is probably not an option (some of the video streaming sites I plan to use do not support it, I think) I wrote the rest of the details below. Thanks for any help!! TV: Panasonic TX-L32X10Y, European version; a 720p 32" quite "regular" LCD TV. Allowed resolutions according to manual: Signal name: 640x480 @60HZ Horizontal frequency: 31.47 kHz Vertical frequency: 60Hz Signal name: 750/720) /60p Horizontal frequency: 45.00 kHz Vertical frequency: 60Hz Signal name: 1,125 (1,080) / 60p Horizontal frequency: 67.50 kHz Vertical frequency: 60Hz (this is exactly how the manual presents it. PC via D-SUB (VGA cable) and "regular" HDMI have more alternatives.) Messing with the "zoom" settings on the TV does not affect the available resolution options on the computer. Computer: The following is a printout from one of the graphics adapter option pages. I think it covers most of it. The computer is a Dell. INTEL(R) EXTREME GRAPHICS 2 REPORT Report Date: 04/17/2011 Report Time[hr:mm:ss]: 20:18:02 Driver Version: 6.14.10.4396 Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600) Default Language: English DirectX* Version: 9.0 Physical Memory: 1021 MB Minimum Graphics Memory: 1 MB Maximum Graphics Memory: 96 MB Graphics Memory in Use: 6 MB Processor: x86 Processor Speed: 2593 MHZ Vendor ID: 8086 Device ID: 2572 Device Revision: 02 * Accelerator Information * Accelerator in Use: Intel(R) 82865G Graphics Controller Video BIOS: 2972 Current Graphics Mode: 1280 by 600 True Color (60 Hz) * Devices Connected to the Graphics Accelerator * Active Digital Displays: 1 * Digital Display * Monitor Name: Plug and Play Monitor Display Type: Digital Gamma Value: 2.20 DDC2 Protocol: Supported Maximum Image Size: Horizontal: Not Available Vertical: Not Available Monitor Supported Modes: 1280 by 720 (50 Hz) 1280 by 720 (60 Hz) Display Power Management Support: Standby Mode: Not Supported Suspend Mode: Not Supported Active Off Mode: Not Supported (disclaimer: this question was also asked at the Wikipedia Reference Desk some time ago and might show up in a Google search. I got no useful answers there.)

Read the article

Add keyboard languages to XP, Vista, and Windows 7

- by Matthew Guay

Do you regularly need to type in multiple languages in Windows? Here we’ll show you the easy way to add and change input languages to your keyboard in XP, Vista, and Windows 7. Windows Vista and 7 come preinstalled with support for viewing a wide variety of languages, so adding an input language is fairly simply. Adding an input language is slightly more difficult in XP, and requires installing additional files if you need an Asian or Complex script language. First we show how to add an input language in Windows Vista and 7; it’s basically the same in both versions. Then, we show how to add a language to XP, and also how to add Complex Script support. Please note that this is only for adding an input language, which will allow you to type in the language you select. This does not change your user interface language. Change keyboard language in Windows 7 and Vista It is fairly simple to add or change a keyboard language in Windows 7 or Vista. In Windows 7, enter “keyboard language” in the Start menu search box, and select “Change keyboards or other input methods”. In Windows Vista, open Control Panel and enter “input language” in the search box and select “Change keyboards or other input methods”. This also works in Windows 7. Now, click Change Keyboards to add another keyboard language or change your default one. Our default input language is US English, and our default keyboard is the US keyboard layout. Click Add to insert another input language while still leaving your default input language installed. Here we selected the standard Thai keyboard language (Thai Kedmanee), but you can select any language you want. Windows offers almost any language you can imagine, so just look for the language you want, select it, and click Ok. Alternately, if you want, you can click Preview to see your layout choice before accepting it. This is only the default characters, not ones that will be activated with Shift or other keys (many Asian languages use many more characters than English, and require the use of Shift and other keys to access them all). Once your finished previewing, click close and then press Ok on the previous dialog. Now you will see both of your keyboard languages in the Installed services box. You can click Add to go back and get more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Also, you can now change the default input language from the top menu. This is the language that your keyboard will start with when you boot your computer. So, if you mainly use English but also use another language, usually it is best to leave English as your default input language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages. Alternately you can switch input languages by pressing Alt+Shift on your keyboard. Some complex languages, such as Chinese, may have extra buttons to change input modes to accommodate their large alphabet. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and select the “Advanced Key Settings” tab. Here you can change settings for Caps Lock and change or add key sequences to change between languages. Also, the On-Screen keyboard will display the correct keyboard language (here the keyboard is displaying Thai), which can be a helpful reference if your physical keyboard doesn’t have your preferred input language printed on it. To open this, simply enter “On-Screen keyboard” in the start menu search, or click All Programs>Accessories>On-Screen keyboard. Change keyboard language in Windows XP The process for changing the keyboard language in Windows XP is slightly different. Open Control Panel, and select “Date, Time, Language, and Regional Options”. Select “Add other languages”. Now, click Details to add another language. XP does not include support for Asian and complex languages by default, so if you need to add one of those languages we have details for that below. Click Add to add an input language. Select your desired language from the list, and choose your desired keyboard layout if your language offers multiple layouts. Here we selected Canadian French with the default layout. Now you will see both of your keyboard languages in the Installed services box. You can click Add to go back and add more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages. Alternately you can switch input languages by pressing Alt+Shift on your keyboard. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and click the “Key Settings” button on the bottom of the dialog. Here you can change settings for Caps Lock and change or add key sequences to change between languages. Add support to XP for Asian and Complex script languages Windows XP does not include support for Asian and Complex script languages by default, but you can easily add them to your computer. This is useful if you wish to type in one of these languages, or simply want to read text written in these languages, since XP will not display these languages correctly if they are not installed. If you wish to install Chinese, Japanese, and/or Korean, check the “Install files for East Asian languages” box. Or, if you need to install a complex script language (including Arabic, Armenian, Georgian, Hebrew, the Indic languages, Thai, and Vietnamese), check the “Install files for complex script and right-to-left languages” box. Choosing either of these options will open a prompt reminding you that this option will take up more disk space. Support for complex languages will require around 10Mb of hard drive space, but East Asian language support may require 230 Mb or more free disk space. Click Ok, and click apply to install your language files. You may have to insert your XP CD into your CD drive to install these files. Insert the disk, and then click Ok. Windows will automatically copy the files, including fonts for these languages… …and then will ask you to reboot your computer to finalize the settings. Click Yes, and then reopen the “Add other languages” dialog when your computer is rebooted, and add a language as before. Now you can add Complex and/or Asian languages to XP, just as above. Here is the XP taskbar language selector with Thai installed. Conclusion Unfortunately we haven’t found a way to add Asian and complex languages in XP without having an XP disc. If you know of a way, let us know in the comments. (No downloading the XP disc from torrent site answers please) Adding an input language is very important for bilingual individuals, and can also be useful if you simply need to occasionally view Asian or Complex languages in XP. And by following the correct instructions for your version of Windows, it should be very easy to add, change, and remove input languages. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut ArticlesAnother Desktop Cube for Windows XP/VistaThe "Up" Keyboard Shortcut for Windows 7 or Vista ExplorerWhat is ctfmon.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

Week in Geek: US Govt E-card Scam Siphons Confidential Data Edition

- by Asian Angel

This week we learned how to “back up photos to Flickr, automate repetitive tasks, & normalize MP3 volume”, enable “stereo mix” in Windows 7 to record audio, create custom papercraft toys, read up on three alternatives to Apple’s flaky iOS alarm clock, decorated our desktops & app docks with Google icon packs, and more. Photo by alexschlegel. Random Geek Links It has been a busy week on the security & malware fronts and we have a roundup of the latest news to help keep you updated. Photo by TopTechWriter.US. US govt e-card scam hits confidential data A fake U.S. government Christmas e-card has managed to siphon off gigabytes of sensitive data from a number of law enforcement and military staff who work on cybersecurity matters, many of whom are involved in computer crime investigations. Security tool uncovers multiple bugs in every browser Michal Zalewski reports that he discovered the vulnerability in Internet Explorer a while ago using his cross_fuzz fuzzing tool and reported it to Microsoft in July 2010. Zalewski also used cross_fuzz to discover bugs in other browsers, which he also reported to the relevant organisations. Microsoft to fix Windows holes, but not ones in IE Microsoft said that it will release two security bulletins next week fixing three holes in Windows, but it is still investigating or working on fixing holes in Internet Explorer that have been reportedly exploited in attacks. Microsoft warns of Windows flaw affecting image rendering Microsoft has warned of a Windows vulnerability that could allow an attacker to take control of a computer if the user is logged on with administrative rights. Windows 7 Not Affected by Critical 0-Day in the Windows Graphics Rendering Engine While confirming that details on a Critical zero-day vulnerability have made their way into the wild, Microsoft noted that customers running the latest iteration of Windows client and server platforms are not exposed to any risks. Microsoft warns of Office-related malware Microsoft’s Malware Protection Center issued a warning this week that it has spotted malicious code on the Internet that can take advantage of a flaw in Word and infect computers after a user does nothing more than read an e-mail. *Refers to a flaw that was addressed in the November security patch releases. Make sure you have all of the latest security updates installed. Unpatched hole in ImgBurn disk burning application According to security specialist Secunia, a highly critical vulnerability in ImgBurn, a lightweight disk burning application, can be used to remotely compromise a user’s system. Hole in VLC Media Player Virtual Security Research (VSR) has identified a vulnerability in VLC Media Player. In versions up to and including 1.1.5 of the VLC Media Player. Flash Player sandbox can be bypassed Flash applications run locally can read local files and send them to an online server – something which the sandbox is supposed to prevent. Chinese auction site touts hacked iTunes accounts Tens of thousands of reportedly hacked iTunes accounts have been found on Chinese auction site Taobao, but the company claims it is unable to take action unless there are direct complaints. What happened in the recent Hotmail outage Mike Schackwitz explains the cause of the recent Hotmail outage. DOJ sends order to Twitter for Wikileaks-related account info The U.S. Justice Department has obtained a court order directing Twitter to turn over information about the accounts of activists with ties to Wikileaks, including an Icelandic politician, a legendary Dutch hacker, and a U.S. computer programmer. Google gets court to block Microsoft Interior Department e-mail win The U.S. Federal Claims Court has temporarily blocked Microsoft from proceeding with the $49.3 million, five-year DOI contract that it won this past November. Google Apps customers get email lockdown Companies and organisations using Google Apps are now able to restrict the email access of selected users. LibreOffice Is the Default Office Suite for Ubuntu 11.04 Matthias Klose has announced some details regarding the replacement of the old OpenOffice.org 3.2.1 packages with the new LibreOffice 3.3 ones, starting with the upcoming Ubuntu 11.04 (Natty Narwhal) Alpha 2 release. Sysadmin Geek Tips Photo by Filomena Scalise. How to Setup Software RAID for a Simple File Server on Ubuntu Do you need a file server that is cheap and easy to setup, “rock solid” reliable, and has Email Alerting? This tutorial shows you how to use Ubuntu, software RAID, and SaMBa to accomplish just that. How to Control the Order of Startup Programs in Windows While you can specify the applications you want to launch when Windows starts, the ability to control the order in which they start is not available. However, there are a couple of ways you can easily overcome this limitation and control the startup order of applications. Random TinyHacker Links Using Opera Unite to Send Large Files A tutorial on using Opera Unite to easily send huge files from your computer. WorkFlowy is a Useful To-do List Tool A cool to-do list tool that lets you integrate multiple tasks in one single list easily. Playing Flash Videos on iOS Devices Yes, you can play flash videos on jailbroken iPhones. Here’s a tutorial. Clear Safari History and Cookies On iPhone A tutorial on clearing your browser history on iPhone and other iOS devices. Monitor Your Internet Usage Here’s a cool, cross-platform tool to monitor your internet bandwidth. Super User Questions See what the community had to say on these popular questions from Super User this week. Why is my upload speed much less than my download speed? Where should I find drivers for my laptop if it didn’t come with a driver disk? OEM Office 2010 without media – how to reinstall? Is there a point to using theft tracking software like Prey on my laptop, if you have login security? Moving an “all-in-one” PC when turned on/off How-To Geek Weekly Article Recap Get caught up on your HTG reading with our hottest articles from this past week. How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk How To Boot 10 Different Live CDs From 1 USB Flash Drive What is Camera Raw, and Why Would a Professional Prefer it to JPG? Did You Know Facebook Has Built-In Shortcut Keys? The How-To Geek Guide to Audio Editing: The Basics One Year Ago on How-To Geek Enjoy looking through our latest gathering of retro article goodness. Learning Windows 7: Create a Homegroup & Join a New Computer To It How To Disconnect a Machine from a Homegroup Use Remote Desktop To Access Other Computers On a Small Office or Home Network How To Share Files and Printers Between Windows 7 and Vista Allow Users To Run Only Specified Programs in Windows 7 The Geek Note That is all we have for you this week and we hope your first week back at work or school has gone very well now that the holidays are over. Know a great tip? Send it in to us at [email protected]. Photo by Pamela Machado. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

Read the article

Securing an ASP.NET MVC 2 Application

- by rajbk

This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources. The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls. The reporting relationship for Northwind Employees is shown below. The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports. Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

Read the article

I have Oracle SQL Developer Installed, Now What?

- by thatjeffsmith

If you’re here because you downloaded a copy of Oracle SQL Developer and now you need help connecting to a database, then you’re in the right place. I’ll show you what you need to get up and going so you can finish your homework, teach yourself Oracle database, or get ready for that job interview. You’ll need about 30 minutes to set everything up…and about 5 years to become proficient with Oracle Oracle Database come with SQL Developer but SQL Developer doesn’t include a database If you install Oracle database, it includes a copy of SQL Developer. If you’re running that copy of SQL Developer, please take a second to upgrade now, as it is WAY out of date. But I’m here to talk to the folks that have downloaded SQL Developer and want to know what to do next. You’ve got it running. You see this ‘Connection’ dialog, and… Where am I connecting to, and who as? You NEED a database Installing SQL Developer does not give you a database. So you’re going to need to install Oracle and create a database, or connect to a database that is already up and running somewhere. Basically you need to know the following: where is this database, what’s it called, and what port is the listener running on? The Default Connection properties in SQL Developer These default settings CAN work, but ONLY if you have installed Oracle Database Express Edition (XE). Localhost is a network alias for 127.0.0.1 which is an IP address that maps to the ‘local’ machine, or the machine you are reading this blog post on. The listener is a service that runs on the server and handles connections for the databases on that machine. You can run a database without a listener and you can run a listener without a database, but you can’t connect to a database on a different server unless both that database and listener are up and running. Each listener ‘listens’ on one or more ports, you need to know the port number for each connection. The default port is 1521, but 1522 is often pretty common. I know all of this sounds very complicated Oracle is a very sophisticated piece of software. It’s not analogous to downloading a mobile phone app and and using it 10 seconds later. It’s not like installing Office/Access either – it requires services, environment setup, kernel tweaks, etc. However. Normally an administrator will setup and install Oracle, create the database, and configure the listener for everyone else to use. They’ll often also setup the connection details for everyone via a ‘TNSNAMES.ORA’ file. This file contains a list of database connection details for folks to browse – kind of like an Oracle database phoneboook. If someone has given you a TNSNAMES.ORA file, or setup your machine to have access to a TNSNAMES file, then you can just switch to the ‘TNS’ connection type, and use the dropdown to select the database you want to connect to. Then you don’t have to worry about the server names, database names, and the port numbers. ORCL – that sounds promising! ORCL is the default SID when creating a new database with the Database Creation Assistant (DBCA). It’s just me, and I need help! No administrator, no database, no nothing. What do you do? You have a few options: Buy a copy of Oracle and download, install, and create a database Download and install XE (FREE!) Download, import, and run our Developer Days Hands-on-Lab (FREE!) If you’re a student (or anyone else) with little to no experience with Oracle, then I recommend the third option. Oracle Technology Network Developer Day: Hands-on Database Application Development Lab The OTN lab runs on a A Virtual Box image which contains: 11gR2 Enterprise Edition copy of Oracle a database and listener running for you to connect to lots of demo data for you to play with SQL Developer installed and ready to connect Some browser based labs you can step through to learn Oracle You download the image, you download and install Virtual Box (also FREE!), then you IMPORT the image you previously downloaded. You then ‘Start’ the image. It will boot a copy of Oracle Enterprise Linux (OEL), start your database, and all that jazz. You can then start up and run SQL Developer inside the image OR you can connect to the database running on the image using the copy of SQL Developer you installed on your host machine. Setup Port Forwarding to Make It Easy to Connect From Your Host When you start the image, it will be assigned an IP address. Depending on what network adapter you select in the image preferences, you may get something that can get out to the internet from your image, something your host machine can see and connect to, or something that kind of just lives out there in a vacuum. You want to avoid the ‘vacuum’ option – unless you’re OK with running SQL Developer inside the Linux image. Open the Virtual Box image properties and go to the Networking options. We’re going to setup port forwarding. This will tell your machine that anything that happens on port 1521 (the default Oracle Listener port), should just go to the image’s port 1521. So I can connect to ‘localhost’ and it will magically get transferred to the image that is running. Oracle Virtual Box Port Forwarding 1521 listener database Now You Just Need a Username and Password The default passwords on this image are all ‘oracle’ – so you can connect as SYS, HR, or whatever – just use ‘oracle’ as the password. The Linux passowrds are all ‘oracle’ too, so you can login as ‘root’ or as ‘oracle’ in the Linux desktop. Connect! Connect as HR to your Oracle database running on the OTN Developer Days Virtual Box image If you’re connecting to someone else’s database, you need to ask the person that manages that environment to create for you an account. Don’t try to ‘guess’ or ‘figure out’ what the username and password is. Introduce yourself, explain your situation, and ask kindly for access. This is your first test – can you connect? I know it’s hard to get started with Oracle. There are however many things we offer to make this easier. You’ll need to do a bit of RTM first though. Once you know what’s required, you will be much more likely to succeed. Of course, if you need help, you know where to find me

Read the article

Session memory – who’s this guy named Max and what’s he doing with my memory?

- by extended_events

SQL Server MVP Jonathan Kehayias (blog) emailed me a question last week when he noticed that the total memory used by the buffers for an event session was larger than the value he specified for the MAX_MEMORY option in the CREATE EVENT SESSION DDL. The answer here seems like an excellent subject for me to kick-off my new “401 – Internals” tag that identifies posts where I pull back the curtains a bit and let you peek into what’s going on inside the extended events engine. In a previous post (Option Trading: Getting the most out of the event session options) I explained that we use a set of buffers to store the event data before we write the event data to asynchronous targets. The MAX_MEMORY along with the MEMORY_PARTITION_MODE defines how big each buffer will be. Theoretically, that means that I can predict the size of each buffer using the following formula: max memory / # of buffers = buffer size If it was that simple I wouldn’t be writing this post. I’ll take “boundary” for 64K Alex For a number of reasons that are beyond the scope of this blog, we create event buffers in 64K chunks. The result of this is that the buffer size indicated by the formula above is rounded up to the next 64K boundary and that is the size used to create the buffers. If you think visually, this means that the graph of your max_memory option compared to the actual buffer size that results will look like a set of stairs rather than a smooth line. You can see this behavior by looking at the output of dm_xe_sessions, specifically the fields related to the buffer sizes, over a range of different memory inputs: Note: This test was run on a 2 core machine using per_cpu partitioning which results in 5 buffers. (Seem my previous post referenced above for the math behind buffer count.) input_memory_kb total_regular_buffers regular_buffer_size total_buffer_size 637 5 130867 654335 638 5 130867 654335 639 5 130867 654335 640 5 196403 982015 641 5 196403 982015 642 5 196403 982015 This is just a segment of the results that shows one of the “jumps” between the buffer boundary at 639 KB and 640 KB. You can verify the size boundary by doing the math on the regular_buffer_size field, which is returned in bytes: 196403 – 130867 = 65536 bytes 65536 / 1024 = 64 KB The relationship between the input for max_memory and when the regular_buffer_size is going to jump from one 64K boundary to the next is going to change based on the number of buffers being created. The number of buffers is dependent on the partition mode you choose. If you choose any partition mode other than NONE, the number of buffers will depend on your hardware configuration. (Again, see the earlier post referenced above.) With the default partition mode of none, you always get three buffers, regardless of machine configuration, so I generated a “range table” for max_memory settings between 1 KB and 4096 KB as an example. start_memory_range_kb end_memory_range_kb total_regular_buffers regular_buffer_size total_buffer_size 1 191 NULL NULL NULL 192 383 3 130867 392601 384 575 3 196403 589209 576 767 3 261939 785817 768 959 3 327475 982425 960 1151 3 393011 1179033 1152 1343 3 458547 1375641 1344 1535 3 524083 1572249 1536 1727 3 589619 1768857 1728 1919 3 655155 1965465 1920 2111 3 720691 2162073 2112 2303 3 786227 2358681 2304 2495 3 851763 2555289 2496 2687 3 917299 2751897 2688 2879 3 982835 2948505 2880 3071 3 1048371 3145113 3072 3263 3 1113907 3341721 3264 3455 3 1179443 3538329 3456 3647 3 1244979 3734937 3648 3839 3 1310515 3931545 3840 4031 3 1376051 4128153 4032 4096 3 1441587 4324761 As you can see, there are 21 “steps” within this range and max_memory values below 192 KB fall below the 64K per buffer limit so they generate an error when you attempt to specify them. Max approximates True as memory approaches 64K The upshot of this is that the max_memory option does not imply a contract for the maximum memory that will be used for the session buffers (Those of you who read Take it to the Max (and beyond) know that max_memory is really only referring to the event session buffer memory.) but is more of an estimate of total buffer size to the nearest higher multiple of 64K times the number of buffers you have. The maximum delta between your initial max_memory setting and the true total buffer size occurs right after you break through a 64K boundary, for example if you set max_memory = 576 KB (see the green line in the table), your actual buffer size will be closer to 767 KB in a non-partitioned event session. You get “stepped up” for every 191 KB block of initial max_memory which isn’t likely to cause a problem for most machines. Things get more interesting when you consider a partitioned event session on a computer that has a large number of logical CPUs or NUMA nodes. Since each buffer gets “stepped up” when you break a boundary, the delta can get much larger because it’s multiplied by the number of buffers. For example, a machine with 64 logical CPUs will have 160 buffers using per_cpu partitioning or if you have 8 NUMA nodes configured on that machine you would have 24 buffers when using per_node. If you’ve just broken through a 64K boundary and get “stepped up” to the next buffer size you’ll end up with total buffer size approximately 10240 KB and 1536 KB respectively (64K * # of buffers) larger than max_memory value you might think you’re getting. Using per_cpu partitioning on large machine has the most impact because of the large number of buffers created. If the amount of memory being used by your system within these ranges is important to you then this is something worth paying attention to and considering when you configure your event sessions. The DMV dm_xe_sessions is the tool to use to identify the exact buffer size for your sessions. In addition to the regular buffers (read: event session buffers) you’ll also see the details for large buffers if you have configured MAX_EVENT_SIZE. The “buffer steps” for any given hardware configuration should be static within each partition mode so if you want to have a handy reference available when you configure your event sessions you can use the following code to generate a range table similar to the one above that is applicable for your specific machine and chosen partition mode. DECLARE @buf_size_output table (input_memory_kb bigint, total_regular_buffers bigint, regular_buffer_size bigint, total_buffer_size bigint) DECLARE @buf_size int, @part_mode varchar(8) SET @buf_size = 1 -- Set to the begining of your max_memory range (KB) SET @part_mode = 'per_cpu' -- Set to the partition mode for the table you want to generate WHILE @buf_size <= 4096 -- Set to the end of your max_memory range (KB) BEGIN BEGIN TRY IF EXISTS (SELECT * from sys.server_event_sessions WHERE name = 'buffer_size_test') DROP EVENT SESSION buffer_size_test ON SERVER DECLARE @session nvarchar(max) SET @session = 'create event session buffer_size_test on server add event sql_statement_completed add target ring_buffer with (max_memory = ' + CAST(@buf_size as nvarchar(4)) + ' KB, memory_partition_mode = ' + @part_mode + ')' EXEC sp_executesql @session SET @session = 'alter event session buffer_size_test on server state = start' EXEC sp_executesql @session INSERT @buf_size_output (input_memory_kb, total_regular_buffers, regular_buffer_size, total_buffer_size) SELECT @buf_size, total_regular_buffers, regular_buffer_size, total_buffer_size FROM sys.dm_xe_sessions WHERE name = 'buffer_size_test' END TRY BEGIN CATCH INSERT @buf_size_output (input_memory_kb) SELECT @buf_size END CATCH SET @buf_size = @buf_size + 1 END DROP EVENT SESSION buffer_size_test ON SERVER SELECT MIN(input_memory_kb) start_memory_range_kb, MAX(input_memory_kb) end_memory_range_kb, total_regular_buffers, regular_buffer_size, total_buffer_size from @buf_size_output group by total_regular_buffers, regular_buffer_size, total_buffer_size Thanks to Jonathan for an interesting question and a chance to explore some of the details of Extended Event internals. - Mike

Read the article

Preserving Permalinks

- by Daniel Moth

One of the things that gets me on a rant is websites that break permalinks. If you have posted something somewhere and there is a public URL pointing to it, that URL should never ever return a 404. You are breaking all websites that ever linked to you and you are breaking all search engine links to your content (that others will try and follow). It is a pet peeve of mine. So when I had to move my blog, obviously I would preserve the root URL (www.danielmoth.com/Blog/), but I also wanted to preserve every URL my blog has generated over the years. To be clear, our focus here is on the URL formatting, not the content migration which I'll talk about in my next post. In this post, I'll describe my solution first and then what it solves. 1. The IIS7 Rewrite Module and web.config There are a few ways you can map an old URL to a new one (so when requests to the old URL come in, they get redirected to the new one). The new blog engine I use (dasBlog) has built-in functionality to do that (Scott refers to it here). Instead, the way I chose to address the issue was to use the IIS7 rewrite module. The IIS7 rewrite module allows redirecting URLs based on pattern matching, regular expressions and, of course, hardcoded full URLs for things that don't fall into any pattern. You can configure it visually from IIS Manager using a handy dialog that allows testing patterns against input URLs. Here is what mine looked like after configuring a few rules: To learn more about this technology check out this video, the reference page and this overview blog post; all 3 pages have a collection of related resources at the bottom worth checking out too. All the visual configuration ends up in a web.config file at the root folder of your website. If you are on a shared hosting service, probably the only way you can use the Rewrite Module is by directly editing the web.config file. Next, I'll describe the URLs I had to map and how that manifested itself in the web.config file. What I did was create the rules locally using the GUI, and then took the generated web.config file and uploaded it to my live site. You can view my web.config here. 2. Monthly Archives Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004_07_01_mothblog_archive.html dasBlog: /Blog/default,month,2004-07.aspx In my web.config file, the rule that deals with this is the one named "monthlyarchive_redirect". 3. Categories Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/labels/Personal.html dasBlog: /Blog/CategoryView,category,Personal.aspx In my web.config file the rule that deals with this is the one named "category_redirect". 4. Posts Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004/07/hello-world.html dasBlog: /Blog/Hello-World.aspx In my web.config file the rule that deals with this is the one named "post_redirect". Note: The decision is taken to use dasBlog URLs that do not include the date info (see the description of my Appearance settings). If we included the date info then it would have to include the day part, which blogger did not generate. This makes it impossible to redirect correctly and to have a single permalink for blog posts moving forward. An implication of this decision, is that no two blog posts can have the same title. The tool I will describe in my next post (inelegantly) deals with duplicates, but not with triplicates or higher. 5. Unhandled by a generic rule Unfortunately, the two blog engines use different rules for generating URLs for blog posts. Most of the time the conversion is as simple as the example of the previous section where a post titled "Hello World" generates a URL with the words separated by a hyphen. Some times that is not the case, for example: /Blog/2006/05/medc-wrap-up.html /Blog/MEDC-Wrapup.aspx or /Blog/2005/01/best-of-moth-2004.html /Blog/Best-Of-The-Moth-2004.aspx or /Blog/2004/11/more-windows-mobile-2005-details.html /Blog/More-Windows-Mobile-2005-Details-Emerge.aspx In short, blogger does not add words to the title beyond ~39 characters, it drops some words from the title generation (e.g. a, an, on, the), and it preserve hyphens that appear in the title. For this reason, we need to detect these and explicitly list them for redirects (no regular expression can help here because the full set of rules is not listed anywhere). In my web.config file the rule that deals with this is the one named "Redirect rule1 for FullRedirects" combined with the rewriteMap named "StaticRedirects". Note: The tool I describe in my next post will detect all the URLs that need to be explicitly redirected and will list them in a file ready for you to copy them to your web.config rewriteMap. 6. C# code doing the same as the web.config I wrote some naive code that does the same thing as the web.config: given a string it will return a new string converted according to the 3 rules above. It does not take into account the 4th case where an explicit hard-coded conversion is needed (the tool I present in the next post does take that into account). static string REGEX_post_redirect = "[0-9]{4}/[0-9]{2}/([0-9a-z-]+).html"; static string REGEX_category_redirect = "labels/([_0-9a-z-% ]+).html"; static string REGEX_monthlyarchive_redirect = "([0-9]{4})_([0-9]{2})_[0-9]{2}_mothblog_archive.html"; static string Redirect(string oldUrl) { GroupCollection g; if (RunRegExOnIt(oldUrl, REGEX_post_redirect, 2, out g)) return string.Concat(g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_category_redirect, 2, out g)) return string.Concat("CategoryView,category,", g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_monthlyarchive_redirect, 3, out g)) return string.Concat("default,month,", g[1].Value, "-", g[2], ".aspx"); return string.Empty; } static bool RunRegExOnIt(string toRegEx, string pattern, int groupCount, out GroupCollection g) { if (pattern.Length == 0) { g = null; return false; } g = new Regex(pattern, RegexOptions.IgnoreCase | RegexOptions.Compiled).Match(toRegEx).Groups; return (g.Count == groupCount); } Comments about this post welcome at the original blog.

Read the article

What's up with LDoms: Part 4 - Virtual Networking Explained

- by Stefan Hinker

I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking. Basic connectivity as we've seen it in the first, simple example, is easy enough. But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now. In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only. Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices. The virtual switch should be seen just like a real ethernet switch. It "runs" in the service domain and moves ethernet packets back and forth. A virtual network device is plumbed in the guest domain. It corresponds to a physical network device in the real world. There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch. In the virtual world, you do the same: You create a virtual network device for your guest and connect it to a virtual switch in a service domain. The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices. Don't be confused, it's rather straight forward, really. Let's start with the simple case, and work our way to some more sophisticated options later on. In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment. In the real world, you'd connect each of these systems to the same ethernet switch. So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2. In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch. We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch. They can now communicate with each other and with any system reachable via nxge2. If primary were running Solaris 10, communication with the guests would not be possible. This is different with Solaris 11, please see the Admin Guide for details. Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one. It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there. However, if we want to do this manually, we can also do that. (One reason might be firewall rules that work on MAC addresses.) So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver. In Solaris 10, they'd appear as "vnet0". Solaris 11 would apply it's usual vanity naming scheme. We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal. In many cases, using Jumbo Frames helps increase throughput performance. By default, these interfaces will run with the standard ethernet MTU of 1500 bytes. To change this, it is usually sufficient to set the desired MTU for the virtual switch. This will automatically set the same MTU for all vnet devices attached to that switch. Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000. Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times. As always, keeping a configuration simple will help avoid errors of all kind. Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable. And as such, this concept needs to be carried over into the virtual world. Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44. There might also be other VLANs on the wire, but the vswitch will ignore all those packets. We also have two vnet devices, one for mars and one for venus. Venus will see traffic from VLANs 33 and 44 only. For VLAN 44, venus will need to configure a tagged interface "vnet44000". For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic. This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33. Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44. On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system. It's the "id=<somenumber>" option available for both vswitches and vnet devices. Normally, Solaris in the guest would enumerate network devices sequentially. However, it has ways of remembering this initial numbering. This is good in the physical world. In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change. Configuration confusion will follow suit. To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far. Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above. I hope this is useful and, as always, I welcome any comments.

Read the article

Create PDF document using iTextSharp in ASP.Net 4.0 and MemoryMappedFile

- by sreejukg

In this article I am going to demonstrate how ASP.Net developers can programmatically create PDF documents using iTextSharp. iTextSharp is a software component, that allows developers to programmatically create or manipulate PDF documents. Also this article discusses the process of creating in-memory file, read/write data from/to the in-memory file utilizing the new feature MemoryMappedFile. I have a database of users, where I need to send a notice to all my users as a PDF document. The sending mail part of it is not covered in this article. The PDF document will contain the company letter head, to make it more official. I have a list of users stored in a database table named “tblusers”. For each user I need to send customized message addressed to them personally. The database structure for the users is give below. id Title Full Name 1 Mr. Sreeju Nair K. G. 2 Dr. Alberto Mathews 3 Prof. Venketachalam Now I am going to generate the pdf document that contains some message to the user, in the following format. Dear <Title> <FullName>, The message for the user. Regards, Administrator Also I have an image, bg.jpg that contains the background for the document generated. I have created .Net 4.0 empty web application project named “iTextSharpSample”. First thing I need to do is to download the iTextSharp dll from the source forge. You can find the url for the download here. http://sourceforge.net/projects/itextsharp/files/ I have extracted the Zip file and added the itextsharp.dll as a reference to my project. Also I have added a web form named default.aspx to my project. After doing all this, the solution explorer have the following view. In the default.aspx page, I inserted one grid view and associated it with a SQL Data source control that bind data from tblusers. I have added a button column in the grid view with text “generate pdf”. The output of the page in the browser is as follows. Now I am going to create a pdf document when the user clicking on the Generate PDF button. As I mentioned before, I am going to work with the file in memory, I am not going to create a file in the disk. I added an event handler for button by specifying onrowcommand event handler. My gridview source looks like <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" Width="481px" CellPadding="4" ForeColor="#333333" GridLines="None" onrowcommand="Generate_PDF" > ………………………………………………………………………….. ………………………………………………………………………….. </asp:GridView> In the code behind, I wrote the corresponding event handler. protected void Generate_PDF(object sender, GridViewCommandEventArgs e) { // The button click event handler code. // I am going to explain the code for this section in the remaining part of the article } The Generate_PDF method is straight forward, It get the title, fullname and message to some variables, then create the pdf using these variables. The code for getting data from the grid view is as follows // get the row index stored in the CommandArgument property int index = Convert.ToInt32(e.CommandArgument); // get the GridViewRow where the command is raised GridViewRow selectedRow = ((GridView)e.CommandSource).Rows[index]; string title = selectedRow.Cells[1].Text; string fullname = selectedRow.Cells[2].Text; string msg = @"There are some changes in the company policy, due to this matter you need to submit your latest address to us. Please update your contact details / personnal details by visiting the member area of the website. ................................... "; since I don’t want to save the file in the disk, I am going the new feature introduced in .Net framework 4, called Memory-Mapped Files. Using Memory-Mapped mapped file, you can created non-persisted memory mapped files, that are not associated with a file in a disk. So I am going to create a temporary file in memory, add the pdf content to it, then write it to the output stream. To read more about MemoryMappedFile, read this msdn article http://msdn.microsoft.com/en-us/library/dd997372.aspx The below portion of the code using MemoryMappedFile object to create a test pdf document in memory and perform read/write operation on file. The CreateViewStream() object will give you a stream that can be used to read or write data to/from file. The code is very straight forward and I included comment so that you can understand the code. using (MemoryMappedFile mmf = MemoryMappedFile.CreateNew("test1.pdf", 1000000)) { // Create a new pdf document object using the constructor. The parameters passed are document size, left margin, right margin, top margin and bottom margin. iTextSharp.text.Document d = new iTextSharp.text.Document(PageSize.A4, 72,72,172,72); //get an instance of the memory mapped file to stream object so that user can write to this using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { // associate the document to the stream. PdfWriter.GetInstance(d, stream); /* add an image as bg*/ iTextSharp.text.Image jpg = iTextSharp.text.Image.GetInstance(Server.MapPath("Image/bg.png")); jpg.Alignment = iTextSharp.text.Image.UNDERLYING; jpg.SetAbsolutePosition(0, 0); //this is the size of my background letter head image. the size is in points. this will fit to A4 size document. jpg.ScaleToFit(595, 842); d.Open(); d.Add(jpg); d.Add(new Paragraph(String.Format("Dear {0} {1},", title, fullname))); d.Add(new Paragraph("\n")); d.Add(new Paragraph(msg)); d.Add(new Paragraph("\n")); d.Add(new Paragraph(String.Format("Administrator"))); d.Close(); } //read the file data byte[] b; using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { BinaryReader rdr = new BinaryReader(stream); b = new byte[mmf.CreateViewStream().Length]; rdr.Read(b, 0, (int)mmf.CreateViewStream().Length); } Response.Clear(); Response.ContentType = "Application/pdf"; Response.BinaryWrite(b); Response.End(); } Press ctrl + f5 to run the application. First I got the user list. Click on the generate pdf icon. The created looks as follows. Summary: Creating pdf document using iTextSharp is easy. You will get lot of information while surfing the www. Some useful resources and references are mentioned below http://itextsharp.com/ http://www.mikesdotnetting.com/Article/82/iTextSharp-Adding-Text-with-Chunks-Phrases-and-Paragraphs http://somewebguy.wordpress.com/2009/05/08/itextsharp-simplify-your-html-to-pdf-creation/ Hope you enjoyed the article.

Read the article

Eine komplette Virtualisierungslandschaft auf dem eigenen Laptop – So geht’s

- by Manuel Hossfeld

Eine komplette Virtualisierungslandschaftauf dem eigenen Laptop – So geht’s Wenn man sich mit dem Virtualisierungsprodukt Oracle VM in der aktuellen Version 3.x näher befassen möchte, bietet es sich natürlich an, eine eigene Umgebung zu Lern- und Testzwecken zu installieren. Doch leichter gesagt als getan: Bei näherer Betrachtung der Architektur wird man schnell feststellen, dass mehrere Rechner benötigt werden, um überhaupt alle Komponenten abbilden zu können: Zum einen gilt es, den oder die OVM Server selbst zu installieren. Das ist recht leicht und schnell erledigt, aber da Oracle VM ein „Typ 1 Hypervisor ist“ - also direkt auf dem Rechner („bare metal“) installiert wird – ist der eigenen Arbeits-PC oder Laptop dafür recht ungeeignet. (Eine Dual-Boot Umgebung wäre zwar denkbar, aber recht unpraktisch.) Zum anderen wird auch ein Rechner benötigt, auf dem der OVM Manager installiert wird. Im Gegensatz zum OVM Server erfolgt dessen Installation nicht „bare metal“, sondern auf einem bestehenden Oracle Linux. Aber was tun, wenn man gerade keinen Linux-Server griffbereit hat und auch keine extra Hardware dafür opfern will? Möchte man alle Funktionen von Oracle VM austesten, so sollte man zusätzlich über einen Shared Storag everüfugen. Dieser kann wahlweise über NFS oder über ein SAN (per iSCSI oder FibreChannel) angebunden werden. Zwar braucht man zum Testen nicht zwingend entsprechende „echte“ Storage-Hardware, aber auch die „Simulation“ entsprechender Komponenten erfordert zusätzliche Hardware mit entsprechendem freien Plattenplatz.(Alternativ können auch fertige „Software Storage Appliances“ wie z.B. OpenFiler oder FreeNAS verwendet werden). Angenommen, es stehen tatsächlich keine „echte“ Server- und Storage Hardware zur Verfügung, so benötigt man für die oben genannten drei Punkte drei bzw. vier Rechner (PCs, Laptops...) - je nachdem ob man einen oder zwei OVM Server starten möchte. Erfreulicherweise geht es aber auch mit deutlich weniger Aufwand: Wie bereits kurz im Blogpost anlässlich des letzten OVM-Releases 3.1.1 beschrieben, ist die aktuelle Version in der Lage, selbst vollständig innerhalb von VirtualBox als Gast zu laufen. Wer bei dieser „doppelten Virtualisierung“ nun an das Prinzip der russischen Matroschka-Puppen denkt, liegt genau richtig. Oracle VM VirtualBox stellt dabei gewissermaßen die äußere Hülle dar – und da es sich bei VirtualBox im Gegensatz zu Oracle VM Server um einen „Typ 2 Hypervisor“ handelt, funktioniert dieser Ansatz auch auf einem „normalen“ Arbeits-PC bzw. Laptop, ohne dessen eigentliche Betriebsystem komplett zu überschreiben. Doch das beste dabei ist: Die Installation der jeweiligen VirtualBox VMs muss man nicht selber durchführen. Der OVM Manager als auch der OVM Server stehen bereits als vorgefertigte „VirtualBox Appliances“ im Oracle Technology Network zum Download zur Verfügung und müssen im Grunde nur noch importiert und konfiguriert werden. Das folgende Schaubild verdeutlicht das Prinzip: Die dunkelgrünen Bereiche stellen jeweils Instanzen der eben erwähnten VirtualBox Appliances für OVM Server und OVM Manager dar. (Hier im Bild sind zwei OVM Server zu sehen, als Minimum würde natürlich auch einer genügen. Dann können aber viele Features wie z.B. OVM HA nicht ausprobieren werden.) Als cleveren Trick zur Einsparung einer weiteren VM für Storage-Zwecke hat Wim Coekaerts (Senior Vice President of Linux and Virtualization Engineering bei Oracle), der „Erbauer“ der VirtualBox Appliances, die OVM Manager Appliance bereits so vorbereitet, dass diese gleichzeitig als NFS-Share (oder ggf. sogar als iSCSI Target) dienen kann. Dies beschreibt er auch kurz auf seinem Blog. Die hellgrünen Ovale stellen die VMs dar, welche dann innerhalb einer der virtualisierten OVM Server laufen können. Aufgrund der Tatsache, dass durch diese „doppelte Virtualisierung“ die Fähigkeit zur Hardware-Virtualisierung verloren geht, können diese „Nutz-VMs“ demzufolge nur paravirtualisiert sein (PVM). Die hier in blau eingezeichneten Netzwerk-Schnittstellen sind virtuelle Interfaces, welche beliebig innerhalb von VirtualBox eingerichtet werden können. Wer die verschiedenen Netzwerk-Rollen innerhalb von Oracle VM im Detail ausprobieren will, kann hier natürlich auch mehr als zwei dieser Interfaces konfigurieren. Die Vorteile dieser Lösung für Test- und Demozwecke liegen auf der Hand: Mit lediglich einem PC bzw. Laptop auf dem VirtualBox installiert ist, können alle oben genannten Komponenten installiert und genutzt werden – genügend RAM vorausgesetzt. Als Minimum darf hier 8GB gelten. Soll auf der „Host-Umgebung“ (also dem PC auf dem VirtualBox läuft) nebenbei noch gearbeiten werden und/oder mehrere „Nutz-VMs“ in dieser simulierten OVM-Server-Umgebung laufen, empfehlen sich natürlich eher 16GB oder mehr. Da die nötigen Schritte zum Installieren und initialen Konfigurieren der Umgebung ausführlich in einem entsprechenden Paper beschrieben sind, möchte ich im Rest dieses Artikels noch einige zusätzliche Tipps und Details erwähnen, welche einem das Leben etwas leichter machen können: Um möglichst entstpannt und mit zusätzlichen „Sicherheitsnetz“ an die Konfiguration der Umgebung herangehen zu können, empfiehlt es sich, ausgiebigen Gebrauch von der in VirtualBox eingebauten Funktionalität der VM Snapshots zu machen. Dies ermöglicht nicht nur ein Zurücksetzen falls einmal etwas schiefgehen sollte, sondern auch ein beliebiges Wiederholen von bereits absolvierten Teilschritten (z.B. um eine andere Idee oder Variante der Umgebung auszuprobieren). Sowohl bei den gerade erwähnten Snapshots als auch bei den VMs selbst sollte man aussagekräftige Namen verwenden. So ist sichergestellt, dass man nicht durcheinander kommt und auch nach ein paar Wochen noch weiß, welche Umgebung man da eigentlich vor sich hat. Dies beinhaltet auch die genaue Versions- und Buildnr. des jeweiligen OVM-Releases. (Siehe dazu auch folgenden Screenshot.) Weitere Informationen und Details zum aktuellen Zustand sowie Zweck der jeweiligen VMs kann in dem oft übersehenen Beschreibungsfeld hinterlegt werden. Es empfiehlt sich, bereits VOR der Installation einen Notizzettel (oder eine Textdatei) mit den geplanten IP-Adressen und Namen für die VMs zu erstellen. (Nicht vergessen: Auch der Server Pool benötigt eine eigene IP.) Dabei sollte man auch nochmal die tatsächlichen Netzwerke der zu verwendenden Virtualbox-Interfaces prüfen und notieren. Achtung: Es gibt im Rahmen der Installation einige Passworte, die vom Nutzer gesetzt werden können – und solche, die zunächst fest eingestellt sind. Zu letzterem gehört das Passwort für den ovs-agent sowie den root-User auf den OVM Servern, welche beide per Default „ovsroot“ lauten. (Alle weiteren Passwort-Informationen sind in dem „Read me first“ Dokument zu finden, welches auf dem Desktop der OVM Manager VM liegt.) Aufpassen muss man ggf. auch in der initialen „Interview-Phase“ welche die VirtualBox VMs durchlaufen, nachdem sie das erste mal gebootet werden. Zu diesem Zeitpunkt ist nämlich auf jeden Fall noch die amerikanische Tastaturbelegung aktiv, so dass man z.B. besser kein „y“ und „z“ in seinem selbst gewählten Passwort verwendet. Aufgrund der Tatsache, dass wie oben erwähnt der OVM Manager auch gleichzeitig den Shared Storage bereitstellt, sollte darauf geachtet werden, dass dessen VM vor den OVM Server VMs gestartet wird. (Andernfalls „findet“ der dem OVM Server Pool zugrundeliegende Cluster sein sog. „Server Pool File System“ nicht.)

Read the article

Guide to Downloading Oracle Fusion Middleware 11g Products

- by Daniel Mortimer

IntroductionThe idea of writing a blog about downloading software seems a bit strange .. right? After all, surely just give me the web download link and away I go!? Unfortunately, life is not so simple if you are a DBA or Systems Administrator tasked with staging Oracle Fusion Middleware 11g products for your chosen business technology stack. Here are the challenges: Oracle Fusion Middleware is not a single product, it is a family of products - a media pack with many many "disks" - which ones do I pick? Are the products I pick certified / supported on my chosen platform? Which download site do I use? I need to be on the latest and greatest - how do I get hold of the latest product patch set? The purpose of this blog is to give you a roadmap to get you through these challenges. Oracle Fusion Middleware 11g - A Product SuiteThe first thing to appreciate is that Oracle Fusion Middleware 11g is not a single product. It is a product suite, an umbrella label for many products. Typically you don't download the whole media pack - well not unless you want to stage 124 Parts - a total of 68 Gig - instead you pick the pieces that are required for your chosen Middleware solution. Therefore, you need to research / understand which products are required to build your solution. In this respect, before you go looking for the software pick and persue the product guide from the table below which matches your situation: Installing a New / Vanilla FMW 11g architecture Oracle Fusion Middleware Installation Planning Guide 11g Upgrading Oracle Application Server 10g to FMW 11g Oracle Fusion Middleware Upgrade Planning Guide 11g Patching an existing FMW 11g architecture Oracle Fusion Middleware Patching Guide 11g Certification Information Ok, so now you have an idea of what Fusion Middleware products you need. It's time to check whether these products are certified against your chosen platform. There are two places to find this information:My Oracle Support Certification Tab PageFigure 1.1 My Oracle Support Certification Tab Page - "Search on SOA Suite" Figure 1.2 My Oracle Support Certification Tab Page - "SOA Suite Search Result" The FMW 11g Certification Central Hub (in the format of xls spreadsheet)Figure 2: Screenshot of FMW 11g Release 1 Certification xls spreadsheet Hints / Tips: Fusion Middleware 11g certification information has only recently been added into the Certification Tab page and I think it is the more friendly way to access the information. However, due to some restrictions with the Certification Tab page interface some of the more, let's say obscure certification information, is still to be only found in the Certification spreadsheet. Be aware that to find certification information via the My Oracle Support Certification Tab page you must enter the FMW 11g product name e.g. "Oracle SOA Suite". Do NOT enter "Oracle Fusion Middleware". The certification information does not exist at this product suite level. For example, if you are building a solution which includes Oracle SOA Suite Oracle WebCenter then you will have to look up the certification information for each product in turn.After choosing the product name, select the latest patch set version. This will not only tell you whether your chosen product is available at that patch set version but provide the certification information relevant to that version. If the product is not available under the latest patch set version, seek the information under previous patch set versions. Important: Make a careful note of the Oracle WebLogic Server version which is certified with your chosen product and patch set version. Oracle WebLogic Server is the core component of a Oracle Fusion Middleware 11g home. It is important therefore to ensure later on that you download the version of Oracle WebLogic Server which is compatible and certified with your chosen product and patch set version.Also - sorry to state the obvious, but please do not take certification information from the screenshots above. The screenshots are only good for the time they were entered into the blog. To ensure you have the latest information, interactively look up the certification details. For more information about finding certification information, bookmark and readMy Oracle Support Certification Tool for Oracle Fusion Middleware Products [Doc ID 1368736.1]How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion Middleware 11g [Doc ID 431578.1] Downloading the Software Now you should be ready to download the software. There are two download locations Oracle Software Delivery Cloud (formerly known as E-Delivery)Figure 3 - Screenshot of Fusion Middleware Download from Delivery CloudOracle Fusion Middleware Download Page on Oracle Technology NetworkFigure 4 - Screenshot of OTN Product Download Screen Hints / Tips: Your choice of download location should be primarily driven by your licensing needs. Take note of the wording on the OTN site - to quote:"The downloads below are provided for evaluators under the OTN License Agreement. Licensed customers should download their software via our Oracle Software Delivery Cloud site, which offers different license terms."However, it has to be said that the presentation of the most of the product download pages on OTN does make the job easier. The Software Delivery Cloud provides you with a flat list of the Oracle Fusion Middleware 11g media pack. You have to know what you are looking for and pick out the right pieces :-( The OTN product download pages present not only the download for the product you want but also its dependencies such as WebLogic Server and Repository Creation Utility. So, even if your licensing requirements drive you towards the cloud, it is still worthwhile checking the OTN pages if only as a guide to what you need to pick out from the flat list found on the cloud site. Latest Patch Set This is an area which may cause you confusion - especially if you are more familiar with the Oracle Application Server 10g patching story. From Patch Set 11.1.1.6 and higher, the majority of FMW 11g products (N.B there are exceptions) provide installers which can be used both to update existing FMW 11g product installs or build brand new ones. This is good news because, unless you are dealing with one of the exceptions, it means you do not have to download base software and a patch set. At the time of the writing, the two significant exceptions are: Portal/Forms/Reports/Discoverer 11g Release 1 (11.1.1.x) Identity Access Management 11g Release 1 (11.1.1.x) The other key message here is ensure you are grabbing a version of Oracle WebLogic Server which is compatible with your chosen product patch set version. Get this wrong and you will hit errors / problems at AS Instance Configuration Time.The go to place is this document - Oracle Fusion Middleware Download, Installation, and Configuration Readme FilesIn fact, this README document pretty much takes you through what I have blogged above. The only thing is you need to know which README to choose, and that's why planning your FMW 11g technology stack and viewing certification information comes into play beforehand. And Finally As the Oracle Fusion Middleware Download, Installation, and Configuration Readme Files states don't forget to check FMW 11g System Requirements FMW 11g Product Interoperability

Read the article

Customize the Five Windows Folder Templates

- by Mark Virtue

Are you’re particular about the way Windows Explorer presents each folder’s contents? Here we show you how to take advantage of Explorer’s built-in templates, which cuts down the time it takes to do customizations. Note: The techniques in this article apply to Windows XP, Vista, and Windows 7. When opening a folder for the first time in Windows Explorer, we are presented with a standard default view of the files and folders in that folder. It may be that the items are presented are perfectly fine, but on the other hand, we may want to customize the view. The aspects of it that we can customize are the following: The display type (list view, details, tiles, thumbnails, etc) Which columns are displayed, and in which order The widths of the visible columns The order in which the files and folders are sorted Any file groupings Thankfully, Windows offers us a shortcut. A particular folder’s settings can be used as a “template” for other, similar folders. In fact, we can store up to five separate sets of folder presentation configurations. Once we save the settings for a particular template, that template can then be applied to other folders. Customize Your First Folder We’ll start by setting up the first of our templates – the default one. Once we create this template and apply it, the vast majority of the folders in our file system will change to match it, so it’s important that we set it up very carefully. The first step in creating and applying the template is to customize one folder with the settings that all the rest will have. Choose a folder that is typical of the folders that you wish to have this default template. Select it in Windows Explorer. To ensure that it is a suitable candidate, right-click the folder name and select Properties, then go to the Customize tab. Ensure that this folder is marked as General Items. If it is not, either choose a different folder or select General Items from the list. Click OK. Now we’re ready to customize our first folder. Changing the way one single folder is presented is straightforward. We start with the folder’s display type. Click the Change your view button in the top-right corner of every Explorer window. Each time you click the button, the folder’s view cycles to the next view type. Alternatively you can click the little down-arrow next to the button to see all the display types at once, and select the one you want. Click the view you want, or drag the slider next to the one you want. If you have chosen Details, then the next thing you may wish to change is which columns are displayed, and the order of these. To choose which columns are displayed, simply right-click on any column heading. A list of the columns currently being display appears. Simply uncheck a column if you don’t want it displayed, and check the columns that you want displayed. If you want some information displayed about your files that is not listed here, then click the More… button for a full list of file attributes. There’s a lot of them! To change the order of the columns that are currently being displayed, simply click on a column heading and drag it to where you think it should be. To change the width of a column, click the line that represents the right-hand edge of the column and drag it left or right. To sort by a column, click once on that column. To reverse the sort-order, click that same column again. To change the groupings of the files in the folder, right-click in a blank area of the folder, select Group by, and select the appropriate column. Apply This Default Template to All Similar Folders Once you have the folder exactly the way you want it, we now use this folder as our default template for most of the folders in our file system. To do this, ensure that you are still in the folder you just customized, and then, from the Organize menu in Explorer, click on Folder and search options. Then select the View tab and click the Apply to Folders button. After you’ve clicked OK, visit some of the other folders in your file system. You should see that most have taken on these new settings. What we’ve just done, in effect, is we have customized the General Items template. This is one of five templates that Windows Explorer uses to display folder contents. The five templates are called (in Windows 7): General Items Documents Pictures Music Videos When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents. If it is not obvious that the folder contents falls into any of the last four templates, then Windows Explorer chooses the General Items template. That’s why most of the folders in your file system are shown using the General Items template. Changing the Other Four Templates If you want to adjust the other four templates, the process is very similar to what we’ve just done. If you wanted to change the “Music” template, for example, the steps would be as follows: Select a folder that contains music items Apply the existing Music template to the folder (even if it doesn’t look like you want it to) Customize the folder to your personal preferences Apply the new template to all “Music” folders A fifth step would be: When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder. First, select a folder that contains music items. It will probably be displayed using the existing Music template: Next, ensure that it is using the Music template. If it’s not, then manually select the Music template. Next, customize the folder to suit your personal preferences (here we’ve added a couple of columns, and sorted by Artist). Now we can set this view to be our Music template. Choose Organize, then the View tab, and click the Apply to Folders button. Note: The only folders that will inherit these settings are the ones that are currently (or will soon be) using the Music template. Now, if you have any folder that contains music items, and you want it to inherit all of these settings, then right-click the folder name, choose Properties, and select that this folder should use the Music template. You can also cehck the box entitled Also apply this template to all subfolders if you want to save yourself even more time with all the sub-folders. Conclusion It’s neat to be able to set up templates for your folder views like this. It’s a shame that Microsoft didn’t take the concept just a little further and allow you to create as many templates as you want. Similar Articles Productive Geek Tips Fix For When Windows Explorer in Vista Stops Showing File NamesCustomize the Windows 7 or Vista Send To MenuFix for New Contact Group Button Not Displaying in VistaWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Make Your Last Minute Holiday Cards with Microsoft Word TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

Read the article

MSCC: Scripting - Administrator's toolbox of magic...

Finally, we made it to have our April meetup - in May. The most obvious explanation is the increased amount of open source and IT activities that either the MSCC, the Linux User Group of Mauritius (LUGM), or the University of Mauritius Student's Computer Club is organising. It's absolutely incredible to see the recent hype of events here on the island. And I'm loving it! Unfortunately, we also had to deal with arranging for a location this time. It was kind of an odyssey as my requests (and phone calls) haven't been answered, even though I tried it several times - well, kind of disappointing and I have to look into that for future gatherings. In my opinion, it is essential that two parameters of a community meeting are fixed as early as possible: Location, and Date and time You can't just change one or both on the very last minute. Well, this time we had to do it due to unforeseen reasons, and I apologise to any MSCC member which couldn't make it to our April meetup. Okay, lesson learned but now back to the actual meetup report ... Shortly after the meeting I placed the following statement as my first impression: "Spontaneous and improvised :) No, seriously, Ish and Dan had well prepared presentations on shell scripting, mainly focused towards Bourne Again Shell (bash), and the pros and cons of scripting versus actually writing something in a decent programming language. I thought that I could cut myself out of the equation but the demand for information about PowerShell was higher than expected..." Well, it turned out that the interest in Windows PowerShell was high, as I even got a couple of questions on it via social media networks during the evening. I also like to mention that the number of attendees went back to what I would call a "standard" number of participation. This time there were 12 craftsmen, but again a good number of First Timers. Reactions of other attendees Here are some impressions and feedback from our participants: "Enjoyed the bash and powershell (linux / windows) presentations ..." -- Nadim on event comments "He [Daniel] also showed us some syntax loopholes in Bash that could leave someone with bad code." -- Ish on MSCC – Let's talk about Scripting Glad to see a couple of first time attendees, especially students from the university itself. Some details on the presentations MSCC: First time visit at the University of Mauritius - Phase II Engineering Tower, room 2.9 Gimme some love ... bash and other shells Ish gave a great introduction into shell scripting as he spoke about existing shell environments and a little bit about their history. Furthermore, he talked about various built-in commands, the use of coreutils, the ability to daisy-chain multiple commands using pipes, the importance of the standard I/O streams and their file descriptors in advanced scripting techniques. Combined with a couple of sample statements in the Linux terminal on Ubuntu 14.04 machine it was a solid presentation. Have a closer look at his slides - published on his blog on MSCC – Let's talk about Scripting. Oddities of scripting After the brief introduction into bash it was Daniel's turn to highlight a good number of oddities when working with shell scripts. First of all, it should be clear that scripting is not supposed for any kind of implementations in terms of software but simply to automate administrative procedures and to simplify routine jobs on a system. One of the cool oddities that he mentioned is that everything (!) in a shell is represented by strings; there are no other types like integer, float, date-time, etc. that you'd like to use in a full-fledged programming language. Let's have a look at his sample: more to come... What's the output? As a conclusion, Daniel suggests that shell scripting should be limited but not restricted to automatic repetitive command stacks and batch jobs, startup wrapper for applications in order to set up the execution environment, and other not too sophisticated jobs. But as soon as it might involve a little bit more logic or you might rely on performance it's better to write an application in Ruby, Python, or Perl (among others of course). This is also enables the possibility to test your code properly. MSCC: Ish talking about Bourne Again Shell (bash) and shell scripting to automate regular tasks MSCC: Daniel gives an overview about the pros and cons of shell scripting versus programming MSCC: PowerShell as your scripting solution on Windows operating systems The path of the Enlightened is long ... and tough. Honestly, even though PowerShell was mentioned without any further details on the meetup's agenda, I didn't expect that there would be demand to give a presentation on Microsoft PowerShell after all. I already took this topic out of the announcement but the audience wanted to have some information. Okay, then let's see what I could do - improvised style. While my machine booted and got hooked up to the projector, I started to talk about the beginnings of PowerShell from back in 2006, and its predecessors MS DOS and Command Prompt. A throwback in history... always good for young people. As usual, Microsoft didn't get it at that time. Instead of listening to their client's needs and demands they ignored the feasibility to administrate Windows server farms without any UI tools. PowerShell is actually a result of this, and seeing that shell scripting is a common, reliable and fast way in an administrator's toolbox for decades, Microsoft had to adapt from their Microsoft Management Console (MMC) to a broader approach. It's not like shell scripting was something new; it is in daily use by alternative operating systems like AIX, HP UX, Solaris, and last but not least Linux. Most interestingly, Microsoft is very good at renovating existing architectures, and over the years PowerShell not only replaced their own combination of Command Prompt and Scripting Hosts (VBScript and CScript) but really turned into a challenging competitor on the market. The shell is easy to extend with cmdlets, and open to other Microsoft products like SQL Server, SharePoint, as well as Third-party software applications. Similar to MMC PowerShell also offers the ability to administer other machine remotely - only without a graphical user interface and therefore it's easier to automate and schedule regular tasks. Following is a sample of a PowerShell script file (extension .ps1): $strComputer = "." $colItems = get-wmiobject -class Win32_BIOS -namespace root\CIMV2 -comp $strComputer foreach ($objItem in $colItems) {write-host "BIOS Characteristics: " $objItem.BiosCharacteristicswrite-host "BIOS Version: " $objItem.BIOSVersionwrite-host "Build Number: " $objItem.BuildNumberwrite-host "Caption: " $objItem.Captionwrite-host "Code Set: " $objItem.CodeSetwrite-host "Current Language: " $objItem.CurrentLanguagewrite-host "Description: " $objItem.Descriptionwrite-host "Identification Code: " $objItem.IdentificationCodewrite-host "Installable Languages: " $objItem.InstallableLanguageswrite-host "Installation Date: " $objItem.InstallDatewrite-host "Language Edition: " $objItem.LanguageEditionwrite-host "List Of Languages: " $objItem.ListOfLanguageswrite-host "Manufacturer: " $objItem.Manufacturerwrite-host "Name: " $objItem.Namewrite-host "Other Target Operating System: " $objItem.OtherTargetOSwrite-host "Primary BIOS: " $objItem.PrimaryBIOSwrite-host "Release Date: " $objItem.ReleaseDatewrite-host "Serial Number: " $objItem.SerialNumberwrite-host "SMBIOS BIOS Version: " $objItem.SMBIOSBIOSVersionwrite-host "SMBIOS Major Version: " $objItem.SMBIOSMajorVersionwrite-host "SMBIOS Minor Version: " $objItem.SMBIOSMinorVersionwrite-host "SMBIOS Present: " $objItem.SMBIOSPresentwrite-host "Software Element ID: " $objItem.SoftwareElementIDwrite-host "Software Element State: " $objItem.SoftwareElementStatewrite-host "Status: " $objItem.Statuswrite-host "Target Operating System: " $objItem.TargetOperatingSystemwrite-host "Version: " $objItem.Versionwrite-host} Which gives you information about your BIOS and Windows OS. Then change the computer name to another one on your network (NetBIOS based) and run the script again. There lots of samples and tutorials at the Microsoft Script Center, and I would advise you to pay a visit over there if you are more interested in PowerShell. The Script Center provides the download links, too. Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Hacking Defence (14. May 2014) WebCup Maurice (7. & 8. June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! My resume of the day Spontaneous and improvised :) The new location at the University of Mauritius turned out very well, there is plenty of space, and it could be a good choice for future meetings. Especially, having the ability to get more and more students into our IT community sounds like a great opportunity. Later during the day, I got some promising mails from Nadim regarding future sessions at the local branch of the Middlesex University. Well, we will see in the future... But for now this will be on hold until approximately October when students resume their regular studies. Anyway, it was a good experience at the university, and thanks again to the UoM Student's Computer Club that made the necessary arrangements for the MSCC!

Read the article

Setup and Use SpecFlow BDD with DevExpress XAF

- by Patrick Liekhus

Let’s get started with using the SpecFlow BDD syntax for writing tests with the DevExpress XAF EasyTest scripting syntax. In order for this to work you will need to download and install the prerequisites listed below. Once they are installed follow the steps outlined below and enjoy. Prerequisites Install the following items: DevExpress eXpress Application Framework (XAF) found here SpecFlow found here Liekhus BDD/XAF Testing library found here Assumptions I am going to assume at this point that you have created your XAF application and have your Module, Win.Module and Win ready for usage. You should have also set any attributes and/or settings as you see fit. Setup So where to start. Create a new testing project within your solution. I typically call this with a similar naming convention as used by XAF, my project name .FunctionalTests (i.e. AlbumManager.FunctionalTests). Add the following references to your project. It should look like the reference list below. DevExpress.Data.v11.x DevExpress.Persistent.Base.v11.x DevExpress.Persistent.BaseImpl.v11.x DevExpress.Xpo.v11.2 Liekhus.Testing.BDD.Core Liekhus.Testing.BDD.DevExpress TechTalk.SpecFlow TestExecutor.v11.x (found in %Program Files%\DevExpress 2011.x\eXpressApp Framework\Tools\EasyTest Right click the TestExecutor reference and set the “Copy Local” setting to True. This forces the TestExecutor executable to be available in the bin directory which is where the EasyTest script will be executed further down in the process. Add an Application Configuration File (app.config) to your test application. You will need to make a few modifications to have SpecFlow generate Microsoft style unit tests. First add the section handler for SpecFlow and then set your choice of testing framework. I prefer MS Tests for my projects. Add the EasyTest configuration file to your project. Add a new XML file and call it Config.xml. Open the properties window for the Config.xml file and set the “Copy to Ouput Directory” to “Copy Always”. You will setup the Config file according to the specifications of the EasyTest library my mapping to your executable and other settings. You can find the details for the configuration of EasyTest here. My file looks like this Create a new folder in your test project called “StepDefinitions”. Add a new SpecFlow Step Definition file item under the StepDefinitions folder. I typically call this class StepDefinition.cs. Have your step definition inherit from the Liekhus.Testing.BDD.DevExpress.StepDefinition class. This will give you the default behaviors for your test in the next section. OK. Now that we have done this series of steps, we will work on simplifying this. This is an early preview of this new project and is not fully ready for consumption. If you would like to experiment with it, please feel free. Our goals are to make this a installable project on it’s own with it’s own project templates and default settings. This will be coming in later versions. Currently this project is in Alpha release. Let’s write our first test Remove the basic test that is created for you. We will not use the default test but rather create our own SpecFlow “Feature” files. Add a new item to your project and select the SpecFlow Feature file under C#. Name your feature file as you do your class files after the test they are performing. Writing a feature file uses the Cucumber syntax of Given… When… Then. Think of it in these terms. Givens are the pre-conditions for the test. The Whens are the actual steps for the test being performed. The Thens are the verification steps that confirm your test either passed or failed. All of these steps are generated into a an EasyTest format and executed against your XAF project. You can find more on the Cucumber syntax by using the Secret Ninja Cucumber Scrolls. This document has several good styles of tests, plus you can get your fill of Chuck Norris vs Ninjas. Pretty humorous document but full of great content. My first test is going to test the entry of a new Album into the application and is outlined below. The Feature section at the top is more for your documentation purposes. Try to be descriptive of the test so that it makes sense to the next person behind you. The Scenario outline is described in the Ninja Scrolls, but think of it as test template. You can write one test outline and have multiple datasets (Scenarios) executed against that test. Here are the steps of my test and their descriptions Given I am starting a new test – tells our test to create a new EasyTest file And (Given) the application is open – tells EasyTest to open our application defined in the Config.xml When I am at the “Albums” screen – tells XAF to navigate to the Albums list view And (When) I click the “New:Album” button – tells XAF to click the New Album button on the ribbon And (When) I enter the following information – tells XAF to find the field on the screen and put the value in that field And (When) I click the “Save and Close” button – tells XAF to click the “Save and Close” button on the detail window Then I verify results as “user” – tells the testing framework to execute the EasyTest as your configured user Once you compile and prepare your tests you should see the following in your Test View. For each of your CreateNewAlbum lines in your scenarios, you will see a new test ready to execute. From here you will use your testing framework of choice to execute the test. This in turn will execute the EasyTest framework to call back into your XAF application and test your business application. Again, please remember that this is an early preview and we are still working out the details. Please let us know if you have any comments/questions/concerns. Thanks and happy testing.

Read the article

Oracle Enterprise Manager 12c Integration With Oracle Enterprise Manager Ops Center 11g

- by Scott Elvington

In a blog entry earlier this year, we announced the availability of the Ops Center 11g plug-in for Enterprise Manager 12c. In this article I will walk you through the process of deploying the plug-in on your existing Enterprise Manager agents and show you some of the capabilities the plug-in provides. We'll also look at the integration from the Ops Center perspective. I will show you how to set up the connection to Enterprise Manager and give an overview of the information that is available. Installing and Configuring the Ops Center Plug-in The plug-in is available for download from the Self Update page (Setup ? Extensibility ? Self Update). The plug-in name is “Ops Center Infrastructure stack”. Once you have downloaded the plug-in you can navigate to the Plug-In management page (Setup ? Extensibility ? Plug-ins) to begin deployment. The plug-in must first be deployed on the Management Server. You will need to provide the repository password of the SYS user in order to deploy the plug-in to the Management Server. There are a few pre-requisites that need to be completed on the Ops Center side before the plug-in can be deployed and configured on the desired Enterprise Manager agents. Any servers, whether physical or virtual, for which you wish to see metrics and alerts need to be managed by Ops Center. This means that the Operating System needs to have an Ops Center management agent installed as a minimum. The plug-in can provide even more value when Ops Center is also managing the other “layers of the stack”, for example the service processor, the blade chassis or the XSCF of an M-Series server. The more information that Ops Center has about the stack, the more information that will be visible within Enterprise Manager via the plug-in. In order to access the information within Ops Center, the plug-in requires a user to connect as. This user does not require any particular Ops Center permissions or roles, it simply needs to exist. You can create a specific “EMPlugin” user within Ops Center or use an existing user. Oracle recommends creating a specific, non-privileged user account within Ops Center for this purpose. From the Ops Center Administration section, select Enterprise Controller, click the Users tab and finally click the Add User icon to create the desired user account. For the purpose of this article I have discovered and managed the OS and service processor of the server where my Enterprise Manager 12c installation is hosted. With the plug-in deployed to the Management Server and the setup done within Ops Center, we're now ready to deploy the plug-in to the agents and configure the targets to communicate with the Ops Center Enterprise Controller. From the Setup menu select Add Targets then Add Targets Manually. Select the bottom radio button “Add Targets Manually by Specifying Target Monitoring Properties”, select Infrastructure Stack from the Target Type dropdown and finally, select the Monitoring Agent where you wish to deploy the plug-in. Click the Add Manually.... button and fill in the details for the new target using the appropriate hostname for your Enterprise Controller and the user and password details for the plug-in access user. After the target has been added to the agent you will need to allow a few minutes for the initial data collection to complete. Once completed you can see the new target in the All Targets list. All metric collections are enabled by default except one. To enable Infrastructure Stack Alarms collection, navigate to the newly added target and then to Target ? Monitoring ? Metric and Collection Settings. There you can click the “Disabled” link under Collection Schedule to enable collection and set your desired collection frequency. By default, a Warning level alert in Ops Center will equate to a Warning level event in Enterprise Manager and a Critical alert will equate to a Critical event. This mapping can be altered in the Metric and Collection Settings also. The default incident rules in Enterprise Manager only create incidents from Critical events so keep this in mind in case you want to see incidents generated for Warning or Info level alerts from Ops Center. Also, because Enterprise Manager already monitors the OS through it's Host target type, the plug-in does not pull OS alerts from Ops Center so as to prevent duplication. In addition to alert propagation, the plug-in also provides data for several reports detailing the topology and configuration of the stack as well as any hardware sensor data that is available. These are available from the Information Publisher Reports. Navigate there from the Enterprise ? Reports menu or directly from the Infrastructure Stack target of interest. As an example, here is a sample of the Hardware Sensors report showing some of the available sensor data. The report can also be exported to a CSV file format if desired. Connecting Ops Center to Enterprise Manager Repository For an Enterprise Manager user, the plug-in provides a deeper visibility to the state of the infrastructure underlying the databases and middleware. On the Ops Center side, there is also a greater visibility to the targets running on the infrastructure. To set up the Ops Center data collection, just navigate to the Administration section and select the Grid Control link. Select the Configure/Connect action from the right-hand menu and complete the wizard forms to enable the connection to the Enterprise Manager repository and UI. Be sure to use the sysman account when configuring the database connection. Once the job completes and the initial data synchronization is done you will see new Target tabs on your OS assets. The new tab lists all the Enterprise Manager targets and any alerts, availability and performance data specific to the selected target. It is also possible to use the GoTo icon to launch the Enterprise Manager BUI in context of the specific target or alert to drill into more detail. Hopefully this brief overview of the integration between Enterprise Manager and Ops Center has provided a jumpstart to getting a more complete view of the full stack of your enterprise systems.

Read the article

Fragmented Log files could be slowing down your database

- by Fatherjack

Something that is sometimes forgotten by a lot of DBAs is the fact that database log files get fragmented in the same way that you get fragmentation in a data file. The cause is very different but the effect is the same – too much effort reading and writing data. Data files get fragmented as data is changed through normal system activity, INSERTs, UPDATEs and DELETEs cause fragmentation and most experienced DBAs are monitoring their indexes for fragmentation and dealing with it accordingly. However, you don’t hear about so many working on their log files. How can a log file get fragmented? I’m glad you asked. When you create a database there are at least two files created on the disk storage; an mdf for the data and an ldf for the log file (you can also have ndf files for extra data storage but that’s off topic for now). It is wholly possible to have more than one log file but in most cases there is little point in creating more than one as the log file is written to in a ‘wrap-around’ method (more on that later). When a log file is created at the time that a database is created the file is actually sub divided into a number of virtual log files (VLFs). The number and size of these VLFs depends on the size chosen for the log file. VLFs are also created in the space added to a log file when a log file growth event takes place. Do you have your log files set to auto grow? Then you have potentially been introducing many VLFs into your log file. Let’s get to see how many VLFs we have in a brand new database. USE master GO CREATE DATABASE VLF_Test ON ( NAME = VLF_Test, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test.mdf', SIZE = 100, MAXSIZE = 500, FILEGROWTH = 50 ) LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5MB, MAXSIZE = 250MB, FILEGROWTH = 5MB ); go USE VLF_Test go DBCC LOGINFO; The results of this are firstly a new database is created with specified files sizes and the the DBCC LOGINFO results are returned to the script editor. The DBCC LOGINFO results have plenty of interesting information in them but lets first note there are 4 rows of information, this relates to the fact that 4 VLFs have been created in the log file. The values in the FileSize column are the sizes of each VLF in bytes, you will see that the last one to be created is slightly larger than the others. So, a 5MB log file has 4 VLFs of roughly 1.25 MB. Lets alter the CREATE DATABASE script to create a log file that’s a bit bigger and see what happens. Alter the code above so that the log file details are replaced by LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 1GB, MAXSIZE = 25GB, FILEGROWTH = 1GB ); With a bigger log file specified we get more VLFs What if we make it bigger again? LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5GB, MAXSIZE = 250GB, FILEGROWTH = 5GB ); This time we see more VLFs are created within our log file. We now have our 5GB log file comprised of 16 files of 320MB each. In fact these sizes fall into all the ranges that control the VLF creation criteria – what a coincidence! The rules that are followed when a log file is created or has it’s size increased are pretty basic. If the file growth is lower than 64MB then 4 VLFs are created If the growth is between 64MB and 1GB then 8 VLFs are created If the growth is greater than 1GB then 16 VLFs are created. Now the potential for chaos comes if the default values and settings for log file growth are used. By default a database log file gets a 1MB log file with unlimited growth in steps of 10%. The database we just created is 6 MB, let’s add some data and see what happens. USE vlf_test go -- we need somewhere to put the data so, a table is in order IF OBJECT_ID('A_Table') IS NOT NULL DROP TABLE A_Table go CREATE TABLE A_Table ( Col_A int IDENTITY, Col_B CHAR(8000) ) GO -- Let's check the state of the log file -- 4 VLFs found EXECUTE ('DBCC LOGINFO'); go -- We can go ahead and insert some data and then check the state of the log file again INSERT A_Table (col_b) SELECT TOP 500 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO -- insert 500 rows and we get 22 VLFs EXECUTE ('DBCC LOGINFO'); go -- Let's insert more rows INSERT A_Table (col_b) SELECT TOP 2000 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO 10 -- insert 2000 rows, in 10 batches and we suddenly have 107 VLFs EXECUTE ('DBCC LOGINFO'); Well, that escalated quickly! Our log file is split, internally, into 107 fragments after a few thousand inserts. The same happens with any logged transactions, I just chose to illustrate this with INSERTs. Having too many VLFs can cause performance degradation at times of database start up, log backup and log restore operations so it’s well worth keeping a check on this property. How do we prevent excessive VLF creation? Creating the database with larger files and also with larger growth steps and actively choosing to grow your databases rather than leaving it to the Auto Grow event can make sure that the growths are made with a size that is optimal. How do we resolve a situation of a database with too many VLFs? This process needs to be done when the database is under little or no stress so that you don’t affect system users. The steps are: BACKUP LOG YourDBName TO YourBackupDestinationOfChoice Shrink the log file to its smallest possible size DBCC SHRINKFILE(FileNameOfTLogHere, TRUNCATEONLY) * Re-size the log file to the size you want it to, taking in to account your expected needs for the coming months or year. ALTER DATABASE YourDBName MODIFY FILE ( NAME = FileNameOfTLogHere, SIZE = TheSizeYouWantItToBeIn_MB) * – If you don’t know the file name of your log file then run sp_helpfile while you are connected to the database that you want to work on and you will get the details you need. The resize step can take quite a while This is already detailed far better than I can explain it by Kimberley Tripp in her blog 8-Steps-to-better-Transaction-Log-throughput.aspx. The result of this will be a log file with a VLF count according to the bullet list above. Knowing when VLFs are being created By complete coincidence while I have been writing this blog (it’s been quite some time from it’s inception to going live) Jonathan Kehayias from SQLSkills.com has written a great article on how to track database file growth using Event Notifications and Service Broker. I strongly recommend taking a look at it as this is going to catch any sneaky auto grows that take place and let you know about them right away. Hassle free monitoring of VLFs If you are lucky or wise enough to be using SQL Monitor or another monitoring tool that let’s you write your own custom metrics then you can keep an eye on this very easily. There is a custom metric for VLFs (written by Stuart Ainsworth) already on the site and there are some others there are very useful so take a moment or two to look around while you are there. Resources MSDN – http://msdn.microsoft.com/en-us/library/ms179355(v=sql.105).aspx Kimberly Tripp from SQLSkills.com – http://www.sqlskills.com/BLOGS/KIMBERLY/post/8-Steps-to-better-Transaction-Log-throughput.aspx Thomas LaRock at Simple-Talk.com – http://www.simple-talk.com/sql/database-administration/monitoring-sql-server-virtual-log-file-fragmentation/ Disclosure I am a Friend of Red Gate. This means that I am more than likely to say good things about Red Gate DBA and Developer tools. No matter how awesome I make them sound, take the time to compare them with other products before you contact the Red Gate sales team to make your order.

Read the article

New Features in ASP.NET Web API 2 - Part I

- by dwahlin

I’m a big fan of ASP.NET Web API. It provides a quick yet powerful way to build RESTful HTTP services that can easily be consumed by a variety of clients. While it’s simple to get started using, it has a wealth of features such as filters, formatters, and message handlers that can be used to extend it when needed. In this post I’m going to provide a quick walk-through of some of the key new features in version 2. I’ll focus on some two of my favorite features that are related to routing and HTTP responses and cover additional features in a future post. Attribute Routing Routing has been a core feature of Web API since it’s initial release and something that’s built into new Web API projects out-of-the-box. However, there are a few scenarios where defining routes can be challenging such as nested routes (more on that in a moment) and any situation where a lot of custom routes have to be defined. For this example, let’s assume that you’d like to define the following nested route: /customers/1/orders This type of route would select a customer with an Id of 1 and then return all of their orders. Defining this type of route in the standard WebApiConfig class is certainly possible, but it isn’t the easiest thing to do for people who don’t understand routing well. Here’s an example of how the route shown above could be defined: public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "CustomerOrdersApiGet", routeTemplate: "api/customers/{custID}/orders", defaults: new { custID = 0, controller = "Customers", action = "Orders" } ); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); GlobalConfiguration.Configuration.Formatters.Insert(0, new JsonpFormatter()); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } With attribute based routing, defining these types of nested routes is greatly simplified. To get started you first need to make a call to the new MapHttpAttributeRoutes() method in the standard WebApiConfig class (or a custom class that you may have created that defines your routes) as shown next: public static class WebApiConfig { public static void Register(HttpConfiguration config) { // Allow for attribute based routes config.MapHttpAttributeRoutes(); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); } } Once attribute based routes are configured, you can apply the Route attribute to one or more controller actions. Here’s an example: [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } This example maps the custId route parameter to the custId parameter in the Orders() method and also ensures that the route parameter is typed as an integer. The Orders() method can be called using the following route: /customers/2/orders While this is extremely easy to use and gets the job done, it doesn’t include the default “api” string on the front of the route that you might be used to seeing. You could add “api” in front of the route and make it “api/customers/{custId:int}/orders” but then you’d have to repeat that across other attribute-based routes as well. To simply this type of task you can add the RoutePrefix attribute above the controller class as shown next so that “api” (or whatever the custom starting point of your route is) is applied to all attribute routes: [RoutePrefix("api")] public class CustomersController : ApiController { [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } } There’s much more that you can do with attribute-based routing in ASP.NET. Check out the following post by Mike Wasson for more details. Returning Responses with IHttpActionResult The first version of Web API provided a way to return custom HttpResponseMessage objects which were pretty easy to use overall. However, Web API 2 now wraps some of the functionality available in version 1 to simplify the process even more. A new interface named IHttpActionResult (similar to ActionResult in ASP.NET MVC) has been introduced which can be used as the return type for Web API controller actions. To return a custom response you can use new helper methods exposed through ApiController such as: Ok NotFound Exception Unauthorized BadRequest Conflict Redirect InvalidModelState Here’s an example of how IHttpActionResult and the helper methods can be used to cleanup code. This is the typical way to return a custom HTTP response in version 1: public HttpResponseMessage Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { return new HttpResponseMessage(HttpStatusCode.OK); } else { throw new HttpResponseException(HttpStatusCode.NotFound); } } With version 2 we can replace HttpResponseMessage with IHttpActionResult and simplify the code quite a bit: public IHttpActionResult Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { //return new HttpResponseMessage(HttpStatusCode.OK); return Ok(); } else { //throw new HttpResponseException(HttpStatusCode.NotFound); return NotFound(); } } You can also cleanup post (insert) operations as well using the helper methods. Here’s a version 1 post action: public HttpResponseMessage Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { var msg = new HttpResponseMessage(HttpStatusCode.Created); msg.Headers.Location = new Uri(Request.RequestUri + newCust.ID.ToString()); return msg; } else { throw new HttpResponseException(HttpStatusCode.Conflict); } } This is what the code looks like in version 2: public IHttpActionResult Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { return Created<Customer>(Request.RequestUri + newCust.ID.ToString(), newCust); } else { return Conflict(); } } More details on IHttpActionResult and the different helper methods provided by the ApiController base class can be found here. Conclusion Although there are several additional features available in Web API 2 that I could cover (CORS support for example), this post focused on two of my favorites features. If you have .NET 4.5.1 available then I definitely recommend checking the new features out. Additional articles that cover features in ASP.NET Web API 2 can be found here.

Read the article

TFS 2010 SDK: Smart Merge - Programmatically Create your own Merge Tool

- by Tarun Arora

Technorati Tags: Team Foundation Server 2010,TFS SDK,TFS API,TFS Merge Programmatically,TFS Work Items Programmatically,TFS Administration Console,ALM The information available in the Merge window in Team Foundation Server 2010 is very important in the decision making during the merging process. However, at present the merge window shows very limited information, more that often you are interested to know the work item, files modified, code reviewer notes, policies overridden, etc associated with the change set. Our friends at Microsoft are working hard to change the game again with vNext, but because at present the merge window is a model window you have to cancel the merge process and go back one after the other to check the additional information you need. If you can relate to what i am saying, you will enjoy this blog post! I will show you how to programmatically create your own merging window using the TFS 2010 API. A few screen shots of the WPF TFS 2010 API – Custom Merging Application that we will be creating programmatically, Excited??? Let’s start coding… 1. Get All Team Project Collections for the TFS Server You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetAllTeamProjectCollections() 2: { 3: TfsConfigurationServer configurationServer = 4: TfsConfigurationServerFactory. 5: GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 6: 7: CatalogNode catalogNode = configurationServer.CatalogNode; 8: return catalogNode.QueryChildren(new Guid[] 9: { CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: } 2. Get All Team Projects for the selected Team Project Collection You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetTeamProjects(string instanceId) 2: { 3: ReadOnlyCollection<CatalogNode> teamProjects = null; 4: 5: TfsConfigurationServer configurationServer = 6: TfsConfigurationServerFactory.GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 7: 8: CatalogNode catalogNode = configurationServer.CatalogNode; 9: var teamProjectCollections = catalogNode.QueryChildren(new Guid[] {CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: 12: foreach (var teamProjectCollection in teamProjectCollections) 13: { 14: if (string.Compare(teamProjectCollection.Resource.Properties["InstanceId"], instanceId, true) == 0) 15: { 16: teamProjects = teamProjectCollection.QueryChildren(new Guid[] { CatalogResourceTypes.TeamProject }, false, 17: CatalogQueryOptions.None); 18: } 19: } 20: 21: return teamProjects; 22: } 3. Get All Branches with in a Team Project programmatically I will be passing the name of the Team Project for which i want to retrieve all the branches. When consuming the ‘Version Control Service’ you have the method QueryRootBranchObjects, you need to pass the recursion type => none, one, full. Full implies you are interested in all branches under that root branch. 1: public static List<BranchObject> GetParentBranch(string projectName) 2: { 3: var branches = new List<BranchObject>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<teamProjectName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var allBranches = versionControl.QueryRootBranchObjects(RecursionType.Full); 9: 10: foreach (var branchObject in allBranches) 11: { 12: if (branchObject.Properties.RootItem.Item.ToUpper().Contains(projectName.ToUpper())) 13: { 14: branches.Add(branchObject); 15: } 16: } 17: 18: return branches; 19: } 4. Get All Branches associated to the Parent Branch Programmatically Now that we have the parent branch, it is important to retrieve all child branches of that parent branch. Lets see how we can achieve this using the TFS API. 1: public static List<ItemIdentifier> GetChildBranch(string parentBranch) 2: { 3: var branches = new List<ItemIdentifier>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var i = new ItemIdentifier(parentBranch); 9: var allBranches = 10: versionControl.QueryBranchObjects(i, RecursionType.None); 11: 12: foreach (var branchObject in allBranches) 13: { 14: foreach (var childBranche in branchObject.ChildBranches) 15: { 16: branches.Add(childBranche); 17: } 18: } 19: 20: return branches; 21: } 5. Get Merge candidates between two branches Programmatically Now that we have the parent and the child branch that we are interested to perform a merge between we will use the method ‘GetMergeCandidates’ in the namespace ‘Microsoft.TeamFoundation.VersionControl.Client’ => http://msdn.microsoft.com/en-us/library/bb138934(v=VS.100).aspx 1: public static MergeCandidate[] GetMergeCandidates(string fromBranch, string toBranch) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetMergeCandidates(fromBranch, toBranch, RecursionType.Full); 7: } 6. Get changeset details Programatically Now that we have the changeset id that we are interested in, we can get details of the changeset. The Changeset object contains the properties => http://msdn.microsoft.com/en-us/library/microsoft.teamfoundation.versioncontrol.client.changeset.aspx - Changes: Gets or sets an array of Change objects that comprise this changeset. - CheckinNote: Gets or sets the check-in note of the changeset. - Comment: Gets or sets the comment of the changeset. - PolicyOverride: Gets or sets the policy override information of this changeset. - WorkItems: Gets an array of work items that are associated with this changeset. 1: public static Changeset GetChangeSetDetails(int changeSetId) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetChangeset(changeSetId); 7: } 7. Possibilities In future posts i will try and extend this idea to explore further possibilities, but few features that i am sure will further help during the merge decision making process would be, - View changed files - Compare modified file with current/previous version - Merge Preview - Last Merge date Any other features that you can think of?

Read the article

ASP.NET MVC 3 Hosting :: Rolling with Razor in MVC v3 Preview

- by mbridge

Razor is an alternate view engine for asp.net MVC. It was introduced in the “WebMatrix” tool and has now been released as part of the asp.net MVC 3 preview 1. Basically, Razor allows us to replace the clunky <% %> syntax with a much cleaner coding model, which integrates very nicely with HTML. Additionally, it provides some really nice features for master page type scenarios and you don’t lose access to any of the features you are currently familiar with, such as HTML helper methods. First, download and install the ASP.NET MVC Preview 1. You can find this at http://www.microsoft.com/downloads/details.aspx?FamilyID=cb42f741-8fb1-4f43-a5fa-812096f8d1e8&displaylang=en. Now, follow these steps to create your first asp.net mvc project using Razor: 1. Open Visual Studio 2010 2. Create a new project. Select File->New->Project (Shift Control N) 3. You will see the list of project types which should look similar to what’s shown: 4. Select “ASP.NET MVC 3 Web Application (Razor).” Set the application name to RazorTest and the path to c:projectsRazorTest for this tutorial. If you select accidently select ASPX, you will end up with the standard asp.net view engine and template, which isn’t what you want. 5. For this tutorial, and ONLY for this tutorial, select “No, do not create a unit test project.” In general, you should create and use a unit test project. Code without unit tests is kind of like diet ice cream. It just isn’t very good. Now, once we have this done, our brand new project will be created. In all likelihood, Visual Studio will leave you looking at the “HomeController.cs” class, as shown below: Immediately, you should notice one difference. The Index action used to look like: public ActionResult Index () { ViewData[“Message”] = “Welcome to ASP.Net MVC!”; Return View(); } While this will still compile and run just fine, ASP.Net MVC 3 has a much nicer way of doing this: public ActionResult Index() { ViewModel.Message = “Welcome to ASP.Net MVC!”; Return View(); } Instead of using ViewData we are using the new ViewModel object, which uses the new dynamic data typing of .Net 4.0 to allow us to express ourselves much more cleanly. This isn’t a tutorial on ALL of MVC 3, but the ViewModel concept is one we will need as we dig into Razor. What comes in the box? When we create a project using the ASP.Net MVC 3 Template with Razor, we get a standard project setup, just like we did in ASP.NET MVC 2.0 but with some differences. Instead of seeing “.aspx” view files and “.ascx” files, we see files with the “.cshtml” which is the default razor extension. Before we discuss the details of a razor file, one thing to keep in mind is that since this is an extremely early preview, intellisense is not currently enabled with the razor view engine. This is promised as an updated before the final release. Just like with the aspx view engine, the convention of the folder name for a set of views matching the controller name without the word “Controller” still stands. Similarly, each action in the controller will usually have a corresponding view file in the appropriate view directory. Remember, in asp.net MVC, convention over configuration is key to successful development! The initial template organizes views in the following folders, located in the project under Views: - Account – The default account management views used by the Account controller. Each file represents a distinct view. - Home – Views corresponding to the appropriate actions within the home controller. - Shared – This contains common view objects used by multiple views. Within here, master pages are stored, as well as partial page views (user controls). By convention, these partial views are named “_XXXPartial.cshtml” where XXX is the appropriate name, such as _LogonPartial.cshtml. Additionally, display templates are stored under here. With this in mind, let us take a look at the index.cshtml file under the home view directory. When you open up index.cshtml you should see 1: @inherits System.Web.Mvc.WebViewPage 2: @{ 3: View.Title = "Home Page"; 4: LayoutPage = "~/Views/Shared/_Layout.cshtml"; 5: } 6: <h2>@View.Message</h2> 7: <p> 8: To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC 9: Website">http://asp.net/mvc</a>. 10: </p> So looking through this, we observe the following facts: Line 1 imports the base page that all views (using Razor) are based on, which is System.Web.Mvc.WebViewPage. Note that this is different than System.Web.MVC.ViewPage which is used by asp.net MVC 2.0 Also note that instead of the <% %> syntax, we use the very simple ‘@’ sign. The View Engine contains enough context sensitive logic that it can even distinguish between @ in code and @ in an email. It’s a very clean markup. Line 2 introduces the idea of a code block in razor. A code block is a scoping mechanism just like it is in a normal C# class. It is designated by @{… } and any C# code can be placed in between. Note that this is all server side code just like it is when using the aspx engine and <% %>. Line 3 allows us to set the page title in the client page’s file. This is a new feature which I’ll talk more about when we get to master pages, but it is another of the nice things razor brings to asp.net mvc development. Line 4 is where we specify our “master” page, but as you can see, you can place it almost anywhere you want, because you tell it where it is located. A Layout Page is similar to a master page, but it gains a bit when it comes to flexibility. Again, we’ll come back to this in a later installment. Line 6 and beyond is where we display the contents of our view. No more using <%: %> intermixed with code. Instead, we get to use very clean syntax such as @View.Message. This is a lot easier to read than <%:@View.Message%> especially when intermixed with html. For example: <p> My name is @View.Name and I live at @View.Address </p> Compare this to the equivalent using the aspx view engine <p> My name is <%:View.Name %> and I live at <%: View.Address %> </p> While not an earth shaking simplification, it is easier on the eyes. As we explore other features, this clean markup will become more and more valuable.

Read the article

Amazon Web Services (AWS) Plug-in for Oracle Enterprise Manager

- by Anand Akela

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Contributed by Sunil Kunisetty and Daniel Chan Introduction and ArchitectureAs more and more enterprises deploy some of their non-critical workload on Amazon Web Services (AWS), it’s becoming critical to monitor those public AWS resources along side with their on-premise resources. Oracle recently announced Oracle Enterprise Manager Plug-in for Amazon Web Services (AWS) allows you to achieve that goal. The on-premise Oracle Enterprise Manager (EM12c) acts as a single tool to get a comprehensive view of your public AWS resources as well as your private cloud resources. By deploying the plug-in within your Cloud Control environment, you gain the following management features: Monitor EBS, EC2 and RDS instances on Amazon Web Services Gather performance metrics and configuration details for AWS instances Raise alerts and violations based on thresholds set on monitoring Generate reports based on the gathered data Users of this Plug-in can leverage the rich Enterprise Manager features such as system promotion, incident generation based on thresholds, integration with 3rd party ticketing applications etc. AWS Monitoring via this Plug-in is enabled via Amazon CloudWatch API and the users of this Plug-in are responsible for supplying credentials for accessing AWS and the CloudWatch API. This Plug-in can only be deployed on an EM12C R2 platform and agent version should be at minimum 12c R2.Here is a pictorial view of the overall architecture: Amazon Elastic Block Store (EBS) Amazon Elastic Compute Cloud (EC2) Amazon Relational Database Service (RDS) Here are a few key features: Rich and exhaustive list of metrics. Metrics can be gathered from an Agent running outside AWS. Critical configuration information. Custom Home Pages with charts and AWS configuration information. Generate incidents based on thresholds set on monitoring data. Discovery and Monitoring AWS instances can be added to EM12C either via the EM12c User Interface (UI) or the EM12c Command Line Interface ( EMCLI) by providing the AWS credentials (Secret Key and Access Key Id) as well as resource specific properties as target properties. Here is a quick mapping of target types and properties for each AWS resources AWS Resource Type Target Type Resource specific properties EBS Resource Amazon EBS Service CloudWatch base URI, EC2 Base URI, Period, Volume Id, Proxy Server and Port EC2 Resource Amazon EC2 Service CloudWatch base URI, EC2 Base URI, Period, Instance Id, Proxy Server and Port RDS Resource Amazon RDS Service CloudWatch base URI, RDS Base URI, Period, Instance Id, Proxy Server and Port Proxy server and port are optional and are only needed if the agent is within the firewall. Here is an emcli example to add an EC2 target. Please read the Installation and Readme guide for more details and step-by-step instructions to deploy the plugin and adding the AWS the instances. ./emcli add_target \ -name="<target name>" \ -type="AmazonEC2Service" \ -host="<host>" \ -properties="ProxyHost=<proxy server>;ProxyPort=<proxy port>;EC2_BaseURI=http://ec2.<region>.amazonaws.com;BaseURI=http://monitoring.<region>.amazonaws.com;InstanceId=<EC2 instance Id>;Period=<data point periond>" \ -subseparator=properties="=" ./emcli set_monitoring_credential \ -set_name="AWSKeyCredentialSet" \ -target_name="<target name>" \ -target_type="AmazonEC2Service" \ -cred_type="AWSKeyCredential" \ -attributes="AccessKeyId:<access key id>;SecretKey:<secret key>" Emcli utility is found under the ORACLE_HOME of EM12C install. Once the instance is discovered, the target will show up under the ‘All Targets’ list under “Amazon EC2 Service’. Once the instances are added, one can navigate to the custom homepages for these resource types. The custom home pages not only include critical metrics, but also vital configuration parameters and incidents raised for these instances. By mapping the configuration parameters as instance properties, we can slice-and-dice and group various AWS instance by leveraging the EM12C Config search feature. The following configuration properties and metrics are collected for these Resource types. Resource Type Configuration Properties Metrics EBS Resource Volume Id, Volume Type, Device Name, Size, Availability Zone Response: Status Utilization: QueueLength, IdleTime Volume Statistics: ReadBrandwith, WriteBandwidth, ReadThroughput, WriteThroughput Operation Statistics: ReadSize, WriteSize, ReadLatency, WriteLatency EC2 Resource Instance ID, Owner Id, Root Device type, Instance Type. Availability Zone Response: Status CPU Utilization: CPU Utilization Disk I/O: DiskReadBytes, DiskWriteBytes, DiskReadOps, DiskWriteOps, DiskReadRate, DiskWriteRate, DiskIOThroughput, DiskReadOpsRate, DiskWriteOpsRate, DiskOperationThroughput Network I/O : NetworkIn, NetworkOut, NetworkInRate, NetworkOutRate, NetworkThroughput RDS Resource Instance ID, Database Engine Name, Database Engine Version, Database Instance Class, Allocated Storage Size, Availability Zone Response: Status Disk I/O: ReadIOPS, WriteIOPS, ReadLatency, WriteLatency, ReadThroughput, WriteThroughput DB Utilization: BinLogDiskUsage, CPUUtilization, DatabaseConnections, FreeableMemory, ReplicaLag, SwapUsage Custom Home Pages As mentioned above, we have custom home pages for these target types that include basic configuration information, last 24 hours availability, top metrics and the incidents generated. Here are few snapshots. EBS Instance Home Page: EC2 Instance Home Page: RDS Instance Home Page: Further Reading: 1) AWS Plugin download 2) Installation and Read Me. 3) Screenwatch on SlideShare 4) Extensibility Programmer's Guide 5) Amazon Web Services

Read the article

Portal And Content - Content Integration - Best Practices

- by Stefan Krantz

Lately we have seen an increase in projects that have failed to either get user friendly content integration or non satisfactory performance. Our intention is to mitigate any knowledge gap that our previous post might have left you with, therefore this post will repeat some recommendation or reference back to old useful post. Moreover this post will help you understand ground up how to design, architect and implement business enabled, responsive and performing portals with complex requirements on business centric information publishing. Design the Information Model The key to successful portal deployments is Information modeling, it's a key task to understand the use case you designing for, therefore I have designed a set of question you need to ask yourself or your customer: Question: Who will own the content, IT or Business? Answer: BusinessQuestion: Who will publish the content, IT or Business? Answer: BusinessQuestion: Will there be multiple publishers? Answer: YesQuestion: Are the publishers computer scientist?Answer: NoQuestion: How often do the information changes, daily, weekly, monthly?Answer: Daily, weekly If your answers to the questions matches at least 2, we strongly recommend you design your content with following principles: Divide your pages in to logical sections, where each section is marked with its purpose Assign capabilities to each section, does it contain text, images, formatting and/or is it static and is populated through other contextual information Select editor/design element type WYSIWYG - Rich Text Plain Text - non-format text Image - Image object Static List - static list of formatted informationDynamic Data List - assembled information from multiple data files through CMIS query The result of such design map could look like following below examples: Based on the outcome of the required elements in the design column 3 from the left you will now simply design a data model in WebCenter Content - Site Studio by creating a Region Definition structure matching your design requirements.For more information on how to create a Region definition see following post: Region Definition Post - note see instruction 7 for details. Each region definition can now be used to instantiate data files, a data file will hold the actual data for each element in the region definition. Another way you can see this is to compare the region definition as an extension to the metadata model in WebCenter Content for each data file item. Design content templates With a solid dependable information model we can now proceed to template creation and page design, in this phase focuses on how to place the content sections from the region definition on the page via a Content Presenter template. Remember by creating content presenter templates you will leverage the latest and most integrated technology WebCenter has to offer. This phase is much easier since the you already have the information model and design wire-frames to base the logic on, however there is still few considerations to pay attention to: Base the template on ADF and make only necessary exceptions to markup when required Leverage ADF design components for Tabs, Accordions and other similar components, this way the design in the content published areas will comply with other design areas based on custom ADF taskflows There is no performance impact when using meta data or region definition based data All data access regardless of type, metadata or xml data it can be accessed via the Content Presenter - Node. See below for applied examples on how to access data Access metadata property from Document - #{node.propertyMap['myProp'].value}myProp in this example can be for instance (dDocName, dDocTitle, xComments or any other available metadata) Access element data from data file xml - #{node.propertyMap['[Region Definition Name]:[Element name]'].asTextHtml}Region Definition Name is the expect region definition that the current data file is instantiatingElement name is the element value you like to grab from the data file I recommend you read following useful post on content template topic:CMIS queries and template creation - note see instruction 9 for detailsStatic List template rendering For more information on templates:Single Item Content TemplateMulti Item Content TemplateExpression Language Internationalization Considerations When integrating content assets via content presenter you by now probably understand that the content item/data file is wired to the page, what is also pretty common at this stage is that the content item/data file only support one language since its not practical or business friendly to mix that into a complex structure. Therefore you will be left with a very common dilemma that you will have to either build a complete new portal for each locale, which is not an good option! However with little bit of information modeling and clear naming convention this can be addressed. Basically you can simply make sure that all content item/data file are named with a predictable naming convention like "Content1_EN" for the English rendition and "Content1_ES" for the Spanish rendition. This way through simple none complex customizations you will be able to dynamically switch the actual content item/data file just before rendering. By following proposed approach above you not only enable a simple mechanism for internationalized content you also preserve the functionality in the content presenter to support business accessible run-time publishing of information on existing and new pages. I recommend you read following useful post on Internationalization topics:Internationalize with Content Presenter Integrate with Review & Approval processes Today the Review and approval functionality and configuration is based out of WebCenter Content - Criteria Workflows. Criteria Workflows uses the metadata of the checked in document to evaluate if the document is under any review/approval process. So for instance if a Criteria Workflow is configured to force any documents with Version = "2" or "higher" and Content Type is "Instructions", any matching content item version on check in will now enter the workflow before getting released for general access. Few things to consider when configuring Criteria Workflows: Make sure to not trigger on version one for Content Items that are Data Files - if you trigger on version 1 you will not only approve an empty document you will also have a content presenter pointing to a none existing document - since the document will only be available after successful completion of the workflow Approval workflows sometimes requires more complex criteria, the recommendation if that is the case is that the meta data triggering such criteria is automatically populated, this can be achieved through many approaches including Content Profiles Criteria workflows are configured and managed in WebCenter Content Administration Applets where you can configure one or more workflows. When you configured Criteria workflows the Content Presenter will support the editors with the approval process directly inline in the "Contribution mode" of the portal. In addition to approve/reject and details of the task, the content presenter natively support the user to view the current and future version of the change he/she is approving. See below for example: Architectural recommendation To support review&approval processes - minimize the amount of data files per page Each CMIS query can consume significant time depending on the complexity of the query - minimize the amount of CMIS queries per page Use Content Presenter Templates based on ADF - this way you minimize the design considerations and optimize the usage of caching Implement the page in as few Data files as possible - simplifies publishing process, increases performance and simplifies release process Named data file (node) or list of named nodes when integrating to pages increases performance vs. querying for data Named data file (node) or list of named nodes when integrating to pages enables business centric page creation and publishing and reduces the need for IT department interaction Summary Just because one architectural decision solves a business problem it doesn't mean its the right one, when designing portals all architecture has to be in harmony and not impacting each other. For instance the most technical complex solution is not always the best since it will most likely defeat the business accessibility, performance or both, therefore the best approach is to first design for simplicity that even a non-technical user can operate, after that consider the performance impact and final look at the technology challenges these brings and workaround them first with out-of-the-box features, after that design and develop functions to complement the short comings.

Search Results

Search found 9952 results on 399 pages for 'more details'.

Page 142/399 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149 | Next Page >

- by rkotulla

- by Tegeril

- by Bob

- by damitamit

- by Jørgen

- by Matthew Guay

- by Asian Angel

- by rajbk

- by thatjeffsmith

- by extended_events

- by Daniel Moth

- by Stefan Hinker

- by sreejukg

- by Manuel Hossfeld

- by Daniel Mortimer

- by Mark Virtue

- by Patrick Liekhus

- by Scott Elvington

- by Fatherjack

- by dwahlin

- by Tarun Arora

- by mbridge

- by Anand Akela

- by Stefan Krantz

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149 | Next Page >