template toolkit - Page 143

Forwarding rsyslog to syslog-ng, with FQDN and facility separation

- by Joshua Miller

I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

Read the article

Introducing the Earthquake Locator – A Bing Maps Silverlight Application, part 1

- by Bobby Diaz

Update: Live demo and source code now available! The recent wave of earthquakes (no pun intended) being reported in the news got me wondering about the frequency and severity of earthquakes around the world. Since I’ve been doing a lot of Silverlight development lately, I decided to scratch my curiosity with a nice little Bing Maps application that will show the location and relative strength of recent seismic activity. Here is a list of technologies this application will utilize, so be sure to have everything downloaded and installed if you plan on following along. Silverlight 3 WCF RIA Services Bing Maps Silverlight Control * Managed Extensibility Framework (optional) MVVM Light Toolkit (optional) log4net (optional) * If you are new to Bing Maps or have not signed up for a Developer Account, you will need to visit www.bingmapsportal.com to request a Bing Maps key for your application. Getting Started We start out by creating a new Silverlight Application called EarthquakeLocator and specify that we want to automatically create the Web Application Project with RIA Services enabled. I cleaned up the web app by removing the Default.aspx and EarthquakeLocatorTestPage.html. Then I renamed the EarthquakeLocatorTestPage.aspx to Default.aspx and set it as my start page. I also set the development server to use a specific port, as shown below. RIA Services Next, I created a Services folder in the EarthquakeLocator.Web project and added a new Domain Service Class called EarthquakeService.cs. This is the RIA Services Domain Service that will provide earthquake data for our client application. I am not using LINQ to SQL or Entity Framework, so I will use the <empty domain service class> option. We will be pulling data from an external Atom feed, but this example could just as easily pull data from a database or another web service. This is an important distinction to point out because each scenario I just mentioned could potentially use a different Domain Service base class (i.e. LinqToSqlDomainService<TDataContext>). Now we can start adding Query methods to our EarthquakeService that pull data from the USGS web site. Here is the complete code for our service class: using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.ServiceModel.Syndication; using System.Web.DomainServices; using System.Web.Ria; using System.Xml; using log4net; using EarthquakeLocator.Web.Model; namespace EarthquakeLocator.Web.Services { /// <summary> /// Provides earthquake data to client applications. /// </summary> [EnableClientAccess()] public class EarthquakeService : DomainService { private static readonly ILog log = LogManager.GetLogger(typeof(EarthquakeService)); // USGS Data Feeds: http://earthquake.usgs.gov/earthquakes/catalogs/ private const string FeedForPreviousDay = "http://earthquake.usgs.gov/earthquakes/catalogs/1day-M2.5.xml"; private const string FeedForPreviousWeek = "http://earthquake.usgs.gov/earthquakes/catalogs/7day-M2.5.xml"; /// <summary> /// Gets the earthquake data for the previous week. /// </summary> /// <returns>A queryable collection of <see cref="Earthquake"/> objects.</returns> public IQueryable<Earthquake> GetEarthquakes() { var feed = GetFeed(FeedForPreviousWeek); var list = new List<Earthquake>(); if ( feed != null ) { foreach ( var entry in feed.Items ) { var quake = CreateEarthquake(entry); if ( quake != null ) { list.Add(quake); } } } return list.AsQueryable(); } /// <summary> /// Creates an <see cref="Earthquake"/> object for each entry in the Atom feed. /// </summary> /// <param name="entry">The Atom entry.</param> /// <returns></returns> private Earthquake CreateEarthquake(SyndicationItem entry) { Earthquake quake = null; string title = entry.Title.Text; string summary = entry.Summary.Text; string point = GetElementValue<String>(entry, "point"); string depth = GetElementValue<String>(entry, "elev"); string utcTime = null; string localTime = null; string depthDesc = null; double? magnitude = null; double? latitude = null; double? longitude = null; double? depthKm = null; if ( !String.IsNullOrEmpty(title) && title.StartsWith("M") ) { title = title.Substring(2, title.IndexOf(',')-3).Trim(); magnitude = TryParse(title); } if ( !String.IsNullOrEmpty(point) ) { var values = point.Split(' '); if ( values.Length == 2 ) { latitude = TryParse(values[0]); longitude = TryParse(values[1]); } } if ( !String.IsNullOrEmpty(depth) ) { depthKm = TryParse(depth); if ( depthKm != null ) { depthKm = Math.Round((-1 * depthKm.Value) / 100, 2); } } if ( !String.IsNullOrEmpty(summary) ) { summary = summary.Replace("</p>", ""); var values = summary.Split( new string[] { "<p>" }, StringSplitOptions.RemoveEmptyEntries); if ( values.Length == 3 ) { var times = values[1].Split( new string[] { "<br>" }, StringSplitOptions.RemoveEmptyEntries); if ( times.Length > 0 ) { utcTime = times[0]; } if ( times.Length > 1 ) { localTime = times[1]; } depthDesc = values[2]; depthDesc = "Depth: " + depthDesc.Substring(depthDesc.IndexOf(":") + 2); } } if ( latitude != null && longitude != null ) { quake = new Earthquake() { Id = entry.Id, Title = entry.Title.Text, Summary = entry.Summary.Text, Date = entry.LastUpdatedTime.DateTime, Url = entry.Links.Select(l => Path.Combine(l.BaseUri.OriginalString, l.Uri.OriginalString)).FirstOrDefault(), Age = entry.Categories.Where(c => c.Label == "Age") .Select(c => c.Name).FirstOrDefault(), Magnitude = magnitude.GetValueOrDefault(), Latitude = latitude.GetValueOrDefault(), Longitude = longitude.GetValueOrDefault(), DepthInKm = depthKm.GetValueOrDefault(), DepthDesc = depthDesc, UtcTime = utcTime, LocalTime = localTime }; } return quake; } private T GetElementValue<T>(SyndicationItem entry, String name) { var el = entry.ElementExtensions.Where(e => e.OuterName == name).FirstOrDefault(); T value = default(T); if ( el != null ) { value = el.GetObject<T>(); } return value; } private double? TryParse(String value) { double d; if ( Double.TryParse(value, out d) ) { return d; } return null; } /// <summary> /// Gets the feed at the specified URL. /// </summary> /// <param name="url">The URL.</param> /// <returns>A <see cref="SyndicationFeed"/> object.</returns> public static SyndicationFeed GetFeed(String url) { SyndicationFeed feed = null; try { log.Debug("Loading RSS feed: " + url); using ( var reader = XmlReader.Create(url) ) { feed = SyndicationFeed.Load(reader); } } catch ( Exception ex ) { log.Error("Error occurred while loading RSS feed: " + url, ex); } return feed; } } } The only method that will be generated in the client side proxy class, EarthquakeContext, will be the GetEarthquakes() method. The reason being that it is the only public instance method and it returns an IQueryable<Earthquake> collection that can be consumed by the client application. GetEarthquakes() calls the static GetFeed(String) method, which utilizes the built in SyndicationFeed API to load the external data feed. You will need to add a reference to the System.ServiceModel.Web library in order to take advantage of the RSS/Atom reader. The API will also allow you to create your own feeds to serve up in your applications. Model I have also created a Model folder and added a new class, Earthquake.cs. The Earthquake object will hold the various properties returned from the Atom feed. Here is a sample of the code for that class. Notice the [Key] attribute on the Id property, which is required by RIA Services to uniquely identify the entity. using System; using System.Collections.Generic; using System.Linq; using System.Runtime.Serialization; using System.ComponentModel.DataAnnotations; namespace EarthquakeLocator.Web.Model { /// <summary> /// Represents an earthquake occurrence and related information. /// </summary> [DataContract] public class Earthquake { /// <summary> /// Gets or sets the id. /// </summary> /// <value>The id.</value> [Key] [DataMember] public string Id { get; set; } /// <summary> /// Gets or sets the title. /// </summary> /// <value>The title.</value> [DataMember] public string Title { get; set; } /// <summary> /// Gets or sets the summary. /// </summary> /// <value>The summary.</value> [DataMember] public string Summary { get; set; } // additional properties omitted } } View Model The recent trend to use the MVVM pattern for WPF and Silverlight provides a great way to separate the data and behavior logic out of the user interface layer of your client applications. I have chosen to use the MVVM Light Toolkit for the Earthquake Locator, but there are other options out there if you prefer another library. That said, I went ahead and created a ViewModel folder in the Silverlight project and added a EarthquakeViewModel class that derives from ViewModelBase. Here is the code: using System; using System.Collections.ObjectModel; using System.ComponentModel.Composition; using System.ComponentModel.Composition.Hosting; using Microsoft.Maps.MapControl; using GalaSoft.MvvmLight; using EarthquakeLocator.Web.Model; using EarthquakeLocator.Web.Services; namespace EarthquakeLocator.ViewModel { /// <summary> /// Provides data for views displaying earthquake information. /// </summary> public class EarthquakeViewModel : ViewModelBase { [Import] public EarthquakeContext Context; /// <summary> /// Initializes a new instance of the <see cref="EarthquakeViewModel"/> class. /// </summary> public EarthquakeViewModel() { var catalog = new AssemblyCatalog(GetType().Assembly); var container = new CompositionContainer(catalog); container.ComposeParts(this); Initialize(); } /// <summary> /// Initializes a new instance of the <see cref="EarthquakeViewModel"/> class. /// </summary> /// <param name="context">The context.</param> public EarthquakeViewModel(EarthquakeContext context) { Context = context; Initialize(); } private void Initialize() { MapCenter = new Location(20, -170); ZoomLevel = 2; } #region Private Methods private void OnAutoLoadDataChanged() { LoadEarthquakes(); } private void LoadEarthquakes() { var query = Context.GetEarthquakesQuery(); Context.Earthquakes.Clear(); Context.Load(query, (op) => { if ( !op.HasError ) { foreach ( var item in op.Entities ) { Earthquakes.Add(item); } } }, null); } #endregion Private Methods #region Properties private bool autoLoadData; /// <summary> /// Gets or sets a value indicating whether to auto load data. /// </summary> /// <value><c>true</c> if auto loading data; otherwise, <c>false</c>.</value> public bool AutoLoadData { get { return autoLoadData; } set { if ( autoLoadData != value ) { autoLoadData = value; RaisePropertyChanged("AutoLoadData"); OnAutoLoadDataChanged(); } } } private ObservableCollection<Earthquake> earthquakes; /// <summary> /// Gets the collection of earthquakes to display. /// </summary> /// <value>The collection of earthquakes.</value> public ObservableCollection<Earthquake> Earthquakes { get { if ( earthquakes == null ) { earthquakes = new ObservableCollection<Earthquake>(); } return earthquakes; } } private Location mapCenter; /// <summary> /// Gets or sets the map center. /// </summary> /// <value>The map center.</value> public Location MapCenter { get { return mapCenter; } set { if ( mapCenter != value ) { mapCenter = value; RaisePropertyChanged("MapCenter"); } } } private double zoomLevel; /// <summary> /// Gets or sets the zoom level. /// </summary> /// <value>The zoom level.</value> public double ZoomLevel { get { return zoomLevel; } set { if ( zoomLevel != value ) { zoomLevel = value; RaisePropertyChanged("ZoomLevel"); } } } #endregion Properties } } The EarthquakeViewModel class contains all of the properties that will be bound to by the various controls in our views. Be sure to read through the LoadEarthquakes() method, which handles calling the GetEarthquakes() method in our EarthquakeService via the EarthquakeContext proxy, and also transfers the loaded entities into the view model’s Earthquakes collection. Another thing to notice is what’s going on in the default constructor. I chose to use the Managed Extensibility Framework (MEF) for my composition needs, but you can use any dependency injection library or none at all. To allow the EarthquakeContext class to be discoverable by MEF, I added the following partial class so that I could supply the appropriate [Export] attribute: using System; using System.ComponentModel.Composition; namespace EarthquakeLocator.Web.Services { /// <summary> /// The client side proxy for the EarthquakeService class. /// </summary> [Export] public partial class EarthquakeContext { } } One last piece I wanted to point out before moving on to the user interface, I added a client side partial class for the Earthquake entity that contains helper properties that we will bind to later: using System; namespace EarthquakeLocator.Web.Model { /// <summary> /// Represents an earthquake occurrence and related information. /// </summary> public partial class Earthquake { /// <summary> /// Gets the location based on the current Latitude/Longitude. /// </summary> /// <value>The location.</value> public string Location { get { return String.Format("{0},{1}", Latitude, Longitude); } } /// <summary> /// Gets the size based on the Magnitude. /// </summary> /// <value>The size.</value> public double Size { get { return (Magnitude * 3); } } } } View Now the fun part! Usually, I would create a Views folder to place all of my View controls in, but I took the easy way out and added the following XAML code to the default MainPage.xaml file. Be sure to add the bing prefix associating the Microsoft.Maps.MapControl namespace after adding the assembly reference to your project. The MVVM Light Toolkit project templates come with a ViewModelLocator class that you can use via a static resource, but I am instantiating the EarthquakeViewModel directly in my user control. I am setting the AutoLoadData property to true as a way to trigger the LoadEarthquakes() method call. The MapItemsControl found within the <bing:Map> control binds its ItemsSource property to the Earthquakes collection of the view model, and since it is an ObservableCollection<T>, we get the automatic two way data binding via the INotifyCollectionChanged interface. <UserControl x:Class="EarthquakeLocator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl" xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" > <UserControl.Resources> <DataTemplate x:Key="EarthquakeTemplate"> <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1" Width="{Binding Size}" Height="{Binding Size}" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="{Binding UtcTime}" /> <TextBlock Text="{Binding LocalTime}" /> <TextBlock Text="{Binding DepthDesc}" /> </StackPanel> </ToolTipService.ToolTip> </Ellipse> </DataTemplate> </UserControl.Resources> <UserControl.DataContext> <vm:EarthquakeViewModel AutoLoadData="True" /> </UserControl.DataContext> <Grid x:Name="LayoutRoot"> <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--" Center="{Binding MapCenter, Mode=TwoWay}" ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}"> <bing:MapItemsControl ItemsSource="{Binding Earthquakes}" ItemTemplate="{StaticResource EarthquakeTemplate}" /> </bing:Map> </Grid> </UserControl> The EarthquakeTemplate defines the Ellipse that will represent each earthquake, the Width and Height that are determined by the Magnitude, the Position on the map, and also the tooltip that will appear when we mouse over each data point. Running the application will give us the following result (shown with a tooltip example): That concludes this portion of our show but I plan on implementing additional functionality in later blog posts. Be sure to come back soon to see the next installments in this series. Enjoy! Additional Resources USGS Earthquake Data Feeds Brad Abrams shows how RIA Services and MVVM can work together

Read the article

Top things web developers should know about the Visual Studio 2013 release

- by Jon Galloway

ASP.NET and Web Tools for Visual Studio 2013 Release NotesASP.NET and Web Tools for Visual Studio 2013 Release NotesSummary for lazy readers: Visual Studio 2013 is now available for download on the Visual Studio site and on MSDN subscriber downloads) Visual Studio 2013 installs side by side with Visual Studio 2012 and supports round-tripping between Visual Studio versions, so you can try it out without committing to a switch Visual Studio 2013 ships with the new version of ASP.NET, which includes ASP.NET MVC 5, ASP.NET Web API 2, Razor 3, Entity Framework 6 and SignalR 2.0 The new releases ASP.NET focuses on One ASP.NET, so core features and web tools work the same across the platform (e.g. adding ASP.NET MVC controllers to a Web Forms application) New core features include new templates based on Bootstrap, a new scaffolding system, and a new identity system Visual Studio 2013 is an incredible editor for web files, including HTML, CSS, JavaScript, Markdown, LESS, Coffeescript, Handlebars, Angular, Ember, Knockdown, etc. Top links: Visual Studio 2013 content on the ASP.NET site are in the standard new releases area: http://www.asp.net/vnext ASP.NET and Web Tools for Visual Studio 2013 Release Notes Short intro videos on the new Visual Studio web editor features from Scott Hanselman and Mads Kristensen Announcing release of ASP.NET and Web Tools for Visual Studio 2013 post on the official .NET Web Development and Tools Blog Scott Guthrie's post: Announcing the Release of Visual Studio 2013 and Great Improvements to ASP.NET and Entity Framework Okay, for those of you who are still with me, let's dig in a bit. Quick web dev notes on downloading and installing Visual Studio 2013 I found Visual Studio 2013 to be a pretty fast install. According to Brian Harry's release post, installing over pre-release versions of Visual Studio is supported. I've installed the release version over pre-release versions, and it worked fine. If you're only going to be doing web development, you can speed up the install if you just select Web Developer tools. Of course, as a good Microsoft employee, I'll mention that you might also want to install some of those other features, like the Store apps for Windows 8 and the Windows Phone 8.0 SDK, but they do download and install a lot of other stuff (e.g. the Windows Phone SDK sets up Hyper-V and downloads several GB's of VM's). So if you're planning just to do web development for now, you can pick just the Web Developer Tools and install the other stuff later. If you've got a fast internet connection, I recommend using the web installer instead of downloading the ISO. The ISO includes all the features, whereas the web installer just downloads what you're installing. Visual Studio 2013 development settings and color theme When you start up Visual Studio, it'll prompt you to pick some defaults. These are totally up to you -whatever suits your development style - and you can change them later. As I said, these are completely up to you. I recommend either the Web Development or Web Development (Code Only) settings. The only real difference is that Code Only hides the toolbars, and you can switch between them using Tools / Import and Export Settings / Reset. Web Development settings Web Development (code only) settings Usually I've just gone with Web Development (code only) in the past because I just want to focus on the code, although the Standard toolbar does make it easier to switch default web browsers. More on that later. Color theme Sigh. Okay, everyone's got their favorite colors. I alternate between Light and Dark depending on my mood, and I personally like how the low contrast on the window chrome in those themes puts the emphasis on my code rather than the tabs and toolbars. I know some people got pretty worked up over that, though, and wanted the blue theme back. I personally don't like it - it reminds me of ancient versions of Visual Studio that I don't want to think about anymore. So here's the thing: if you install Visual Studio Ultimate, it defaults to Blue. The other versions default to Light. If you use Blue, I won't criticize you - out loud, that is. You can change themes really easily - either Tools / Options / Environment / General, or the smart way: ctrl+q for quick launch, then type Theme and hit enter. Signing in During the first run, you'll be prompted to sign in. You don't have to - you can click the "Not now, maybe later" link at the bottom of that dialog. I recommend signing in, though. It's not hooked in with licensing or tracking the kind of code you write to sell you components. It is doing good things, like syncing your Visual Studio settings between computers. More about that here. So, you don't have to, but I sure do. Overview of shiny new things in ASP.NET land There are a lot of good new things in ASP.NET. I'll list some of my favorite here, but you can read more on the ASP.NET site. One ASP.NET You've heard us talk about this for a while. The idea is that options are good, but choice can be a burden. When you start a new ASP.NET project, why should you have to make a tough decision - with long-term consequences - about how your application will work? If you want to use ASP.NET Web Forms, but have the option of adding in ASP.NET MVC later, why should that be hard? It's all ASP.NET, right? Ideally, you'd just decide that you want to use ASP.NET to build sites and services, and you could use the appropriate tools (the green blocks below) as you needed them. So, here it is. When you create a new ASP.NET application, you just create an ASP.NET application. Next, you can pick from some templates to get you started... but these are different. They're not "painful decision" templates, they're just some starting pieces. And, most importantly, you can mix and match. I can pick a "mostly" Web Forms template, but include MVC and Web API folders and core references. If you've tried to mix and match in the past, you're probably aware that it was possible, but not pleasant. ASP.NET MVC project files contained special project type GUIDs, so you'd only get controller scaffolding support in a Web Forms project if you manually edited the csproj file. Features in one stack didn't work in others. Project templates were painful choices. That's no longer the case. Hooray! I just did a demo in a presentation last week where I created a new Web Forms + MVC + Web API site, built a model, scaffolded MVC and Web API controllers with EF Code First, add data in the MVC view, viewed it in Web API, then added a GridView to the Web Forms Default.aspx page and bound it to the Model. In about 5 minutes. Sure, it's a simple example, but it's great to be able to share code and features across the whole ASP.NET family. Authentication In the past, authentication was built into the templates. So, for instance, there was an ASP.NET MVC 4 Intranet Project template which created a new ASP.NET MVC 4 application that was preconfigured for Windows Authentication. All of that authentication stuff was built into each template, so they varied between the stacks, and you couldn't reuse them. You didn't see a lot of changes to the authentication options, since they required big changes to a bunch of project templates. Now, the new project dialog includes a common authentication experience. When you hit the Change Authentication button, you get some common options that work the same way regardless of the template or reference settings you've made. These options work on all ASP.NET frameworks, and all hosting environments (IIS, IIS Express, or OWIN for self-host) The default is Individual User Accounts: This is the standard "create a local account, using username / password or OAuth" thing; however, it's all built on the new Identity system. More on that in a second. The one setting that has some configuration to it is Organizational Accounts, which lets you configure authentication using Active Directory, Windows Azure Active Directory, or Office 365. Identity There's a new identity system. We've taken the best parts of the previous ASP.NET Membership and Simple Identity systems, rolled in a lot of feedback and made big enhancements to support important developer concerns like unit testing and extensiblity. I've written long posts about ASP.NET identity, and I'll do it again. Soon. This is not that post. The short version is that I think we've finally got just the right Identity system. Some of my favorite features: There are simple, sensible defaults that work well - you can File / New / Run / Register / Login, and everything works. It supports standard username / password as well as external authentication (OAuth, etc.). It's easy to customize without having to re-implement an entire provider. It's built using pluggable pieces, rather than one large monolithic system. It's built using interfaces like IUser and IRole that allow for unit testing, dependency injection, etc. You can easily add user profile data (e.g. URL, twitter handle, birthday). You just add properties to your ApplicationUser model and they'll automatically be persisted. Complete control over how the identity data is persisted. By default, everything works with Entity Framework Code First, but it's built to support changes from small (modify the schema) to big (use another ORM, store your data in a document database or in the cloud or in XML or in the EXIF data of your desktop background or whatever). It's configured via OWIN. More on OWIN and Katana later, but the fact that it's built using OWIN means it's portable. You can find out more in the Authentication and Identity section of the ASP.NET site (and lots more content will be going up there soon). New Bootstrap based project templates The new project templates are built using Bootstrap 3. Bootstrap (formerly Twitter Bootstrap) is a front-end framework that brings a lot of nice benefits: It's responsive, so your projects will automatically scale to device width using CSS media queries. For example, menus are full size on a desktop browser, but on narrower screens you automatically get a mobile-friendly menu. The built-in Bootstrap styles make your standard page elements (headers, footers, buttons, form inputs, tables etc.) look nice and modern. Bootstrap is themeable, so you can reskin your whole site by dropping in a new Bootstrap theme. Since Bootstrap is pretty popular across the web development community, this gives you a large and rapidly growing variety of templates (free and paid) to choose from. Bootstrap also includes a lot of very useful things: components (like progress bars and badges), useful glyphicons, and some jQuery plugins for tooltips, dropdowns, carousels, etc.). Here's a look at how the responsive part works. When the page is full screen, the menu and header are optimized for a wide screen display: When I shrink the page down (this is all based on page width, not useragent sniffing) the menu turns into a nice mobile-friendly dropdown: For a quick example, I grabbed a new free theme off bootswatch.com. For simple themes, you just need to download the boostrap.css file and replace the /content/bootstrap.css file in your project. Now when I refresh the page, I've got a new theme: Scaffolding The big change in scaffolding is that it's one system that works across ASP.NET. You can create a new Empty Web project or Web Forms project and you'll get the Scaffold context menus. For release, we've got MVC 5 and Web API 2 controllers. We had a preview of Web Forms scaffolding in the preview releases, but they weren't fully baked for RTM. Look for them in a future update, expected pretty soon. This scaffolding system wasn't just changed to work across the ASP.NET frameworks, it's also built to enable future extensibility. That's not in this release, but should also hopefully be out soon. Project Readme page This is a small thing, but I really like it. When you create a new project, you get a Project_Readme.html page that's added to the root of your project and opens in the Visual Studio built-in browser. I love it. A long time ago, when you created a new project we just dumped it on you and left you scratching your head about what to do next. Not ideal. Then we started adding a bunch of Getting Started information to the new project templates. That told you what to do next, but you had to delete all of that stuff out of your website. It doesn't belong there. Not ideal. This is a simple HTML file that's not integrated into your project code at all. You can delete it if you want. But, it shows a lot of helpful links that are current for the project you just created. In the future, if we add new wacky project types, they can create readme docs with specific information on how to do appropriately wacky things. Side note: I really like that they used the internal browser in Visual Studio to show this content rather than popping open an HTML page in the default browser. I hate that. It's annoying. If you're doing that, I hope you'll stop. What if some unnamed person has 40 or 90 tabs saved in their browser session? When you pop open your "Thanks for installing my Visual Studio extension!" page, all eleventy billion tabs start up and I wish I'd never installed your thing. Be like these guys and pop stuff Visual Studio specific HTML docs in the Visual Studio browser. ASP.NET MVC 5 The biggest change with ASP.NET MVC 5 is that it's no longer a separate project type. It integrates well with the rest of ASP.NET. In addition to that and the other common features we've already looked at (Bootstrap templates, Identity, authentication), here's what's new for ASP.NET MVC. Attribute routing ASP.NET MVC now supports attribute routing, thanks to a contribution by Tim McCall, the author of http://attributerouting.net. With attribute routing you can specify your routes by annotating your actions and controllers. This supports some pretty complex, customized routing scenarios, and it allows you to keep your route information right with your controller actions if you'd like. Here's a controller that includes an action whose method name is Hiding, but I've used AttributeRouting to configure it to /spaghetti/with-nesting/where-is-waldo public class SampleController : Controller { [Route("spaghetti/with-nesting/where-is-waldo")] public string Hiding() { return "You found me!"; } } I enable that in my RouteConfig.cs, and I can use that in conjunction with my other MVC routes like this: public class RouteConfig { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapMvcAttributeRoutes(); routes.MapRoute( name: "Default", url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } ); } } You can read more about Attribute Routing in ASP.NET MVC 5 here. Filter enhancements There are two new additions to filters: Authentication Filters and Filter Overrides. Authentication filters are a new kind of filter in ASP.NET MVC that run prior to authorization filters in the ASP.NET MVC pipeline and allow you to specify authentication logic per-action, per-controller, or globally for all controllers. Authentication filters process credentials in the request and provide a corresponding principal. Authentication filters can also add authentication challenges in response to unauthorized requests. Override filters let you change which filters apply to a given action method or controller. Override filters specify a set of filter types that should not be run for a given scope (action or controller). This allows you to configure filters that apply globally but then exclude certain global filters from applying to specific actions or controllers. ASP.NET Web API 2 ASP.NET Web API 2 includes a lot of new features. Attribute Routing ASP.NET Web API supports the same attribute routing system that's in ASP.NET MVC 5. You can read more about the Attribute Routing features in Web API in this article. OAuth 2.0 ASP.NET Web API picks up OAuth 2.0 support, using security middleware running on OWIN (discussed below). This is great for features like authenticated Single Page Applications. OData Improvements ASP.NET Web API now has full OData support. That required adding in some of the most powerful operators: $select, $expand, $batch and $value. You can read more about OData operator support in this article by Mike Wasson. Lots more There's a huge list of other features, including CORS (cross-origin request sharing), IHttpActionResult, IHttpRequestContext, and more. I think the best overview is in the release notes. OWIN and Katana I've written about OWIN and Katana recently. I'm a big fan. OWIN is the Open Web Interfaces for .NET. It's a spec, like HTML or HTTP, so you can't install OWIN. The benefit of OWIN is that it's a community specification, so anyone who implements it can plug into the ASP.NET stack, either as middleware or as a host. Katana is the Microsoft implementation of OWIN. It leverages OWIN to wire up things like authentication, handlers, modules, IIS hosting, etc., so ASP.NET can host OWIN components and Katana components can run in someone else's OWIN implementation. Howard Dierking just wrote a cool article in MSDN magazine describing Katana in depth: Getting Started with the Katana Project. He had an interesting example showing an OWIN based pipeline which leveraged SignalR, ASP.NET Web API and NancyFx components in the same stack. If this kind of thing makes sense to you, that's great. If it doesn't, don't worry, but keep an eye on it. You're going to see some cool things happen as a result of ASP.NET becoming more and more pluggable. Visual Studio Web Tools Okay, this stuff's just crazy. Visual Studio has been adding some nice web dev features over the past few years, but they've really cranked it up for this release. Visual Studio is by far my favorite code editor for all web files: CSS, HTML, JavaScript, and lots of popular libraries. Stop thinking of Visual Studio as a big editor that you only use to write back-end code. Stop editing HTML and CSS in Notepad (or Sublime, Notepad++, etc.). Visual Studio starts up in under 2 seconds on a modern computer with an SSD. Misspelling HTML attributes or your CSS classes or jQuery or Angular syntax is stupid. It doesn't make you a better developer, it makes you a silly person who wastes time. Browser Link Browser Link is a real-time, two-way connection between Visual Studio and all connected browsers. It's only attached when you're running locally, in debug, but it applies to any and all connected browser, including emulators. You may have seen demos that showed the browsers refreshing based on changes in the editor, and I'll agree that's pretty cool. But it's really just the start. It's a two-way connection, and it's built for extensiblity. That means you can write extensions that push information from your running application (in IE, Chrome, a mobile emulator, etc.) back to Visual Studio. Mads and team have showed off some demonstrations where they enabled edit mode in the browser which updated the source HTML back on the browser. It's also possible to look at how the rendered HTML performs, check for compatibility issues, watch for unused CSS classes, the sky's the limit. New HTML editor The previous HTML editor had a lot of old code that didn't allow for improvements. The team rewrote the HTML editor to take advantage of the new(ish) extensibility features in Visual Studio, which then allowed them to add in all kinds of features - things like CSS Class and ID IntelliSense (so you type style="" and get a list of classes and ID's for your project), smart indent based on how your document is formatted, JavaScript reference auto-sync, etc. Here's a 3 minute tour from Mads Kristensen. The previous HTML editor had a lot of old code that didn't allow for improvements. The team rewrote the HTML editor to take advantage of the new(ish) extensibility features in Visual Studio, which then allowed them to add in all kinds of features - things like CSS Class and ID IntelliSense (so you type style="" and get a list of classes and ID's for your project), smart indent based on how your document is formatted, JavaScript reference auto-sync, etc. Lots more Visual Studio web dev features That's just a sampling - there's a ton of great features for JavaScript editing, CSS editing, publishing, and Page Inspector (which shows real-time rendering of your page inside Visual Studio). Here are some more short videos showing those features. Lots, lots more Okay, that's just a summary, and it's still quite a bit. Head on over to http://asp.net/vnext for more information, and download Visual Studio 2013 now to get started!

Read the article

Dec 5th Links: ASP.NET, ASP.NET MVC, jQuery, Silverlight, Visual Studio

- by ScottGu

Here is the latest in my link-listing series. Also check out my VS 2010 and .NET 4 series for another on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET ASP.NET Code Samples Collection: J.D. Meier has a great post that provides a detailed round-up of ASP.NET code samples and tutorials from a wide variety of sources. Lots of useful pointers. Slash your ASP.NET compile/load time without any hard work: Nice article that details a bunch of optimizations you can make to speed up ASP.NET project load and compile times. You might also want to read my previous blog post on this topic here. 10 Essential Tools for Building ASP.NET Websites: Great article by Stephen Walther on 10 great (and free) tools that enable you to more easily build great ASP.NET Websites. Highly recommended reading. Optimize Images using the ASP.NET Sprite and Image Optimization Framework: A nice article by 4GuysFromRolla that discusses how to use the open-source ASP.NET Sprite and Image Optimization Framework (one of the tools recommended by Stephen in the previous article). You can use this to significantly improve the load-time of your pages on the client. Formatting Dates, Times and Numbers in ASP.NET: Scott Mitchell has a great article that discusses formatting dates, times and numbers in ASP.NET. A very useful link to bookmark. Also check out James Michael’s DateTime is Packed with Goodies blog post for other DateTime tips. Examining ASP.NET’s Membership, Roles and Profile APIs (Part 18): Everything you could possibly want to known about ASP.NET’s built-in Membership, Roles and Profile APIs must surely be in this tutorial series. Part 18 covers how to store additional user info with Membership. ASP.NET with jQuery An Introduction to jQuery Templates: Stephen Walther has written an outstanding introduction and tutorial on the new jQuery Template plugin that the ASP.NET team has contributed to the jQuery project. Composition with jQuery Templates and jQuery Templates, Composite Rendering, and Remote Loading: Dave Ward has written two nice posts that talk about composition scenarios with jQuery Templates and some cool scenarios you can enable with them. Using jQuery and ASP.NET to Build a News Ticker: Scott Mitchell has a nice tutorial that demonstrates how to build a dynamically updated “news ticker” style UI with ASP.NET and jQuery. Checking All Checkboxes in a GridView using jQuery: Scott Mitchell has a nice post that covers how to use jQuery to enable a checkbox within a GridView’s header to automatically check/uncheck all checkboxes contained within rows of it. Using jQuery to POST Form Data to an ASP.NET AJAX Web Service: Rick Strahl has a nice post that discusses how to capture form variables and post them to an ASP.NET AJAX Web Service (.asmx). ASP.NET MVC ASP.NET MVC Diagnostics Using NuGet: Phil Haack has a nice post that demonstrates how to easily install a diagnostics page (using NuGet) that can help identify and diagnose common configuration issues within your apps. ASP.NET MVC 3 JsonValueProviderFactory: James Hughes has a nice post that discusses how to take advantage of the new JsonValueProviderFactory support built into ASP.NET MVC 3. This makes it easy to post JSON payloads to MVC action methods. Practical jQuery Mobile with ASP.NET MVC: James Hughes has another nice post that discusses how to use the new jQuery Mobile library with ASP.NET MVC to build great mobile web applications. Credit Card Validator for ASP.NET MVC 3: Benjii Me has a nice post that demonstrates how to build a [CreditCard] validator attribute that can be used to easily validate credit card numbers are in the correct format with ASP.NET MVC. Silverlight Silverlight FireStarter Keynote and Sessions: A great blog post from John Papa that contains pointers and descriptions of all the great Silverlight content we published last week at the Silverlight FireStarter. You can watch all of the talks online. More details on my keynote and Silverlight 5 announcements can be found here. 31 Days of Windows Phone 7: 31 great tutorials on how to build Windows Phone 7 applications (using Silverlight). Silverlight for Windows Phone Toolkit Update: David Anson has a nice post that discusses some of the additional controls provided with the Silverlight for Windows Phone Toolkit. Visual Studio JavaScript Editor Extensions: A nice (and free) Visual Studio plugin built by the web tools team that significantly improves the JavaScript intellisense support within Visual Studio. HTML5 Intellisense for Visual Studio: Gil has a blog post that discusses a new extension my team has posted to the Visual Studio Extension Gallery that adds HTML5 schema support to Visual Studio 2008 and 2010. Team Build + Web Deployment + Web Deploy + VS 2010 = Goodness: Visual blogs about how to enable a continuous deployment system with VS 2010, TFS 2010 and the Microsoft Web Deploy framework. Visual Studio 2010 Emacs Emulation Extension and VIM Emulation Extension: Check out these two extensions if you are fond of Emacs and VIM key bindings and want to enable them within Visual Studio 2010. Hope this helps, Scott

Read the article

Try out Windows Phone 7 on your PC today

- by Matthew Guay

Anticipation has been building for the new Windows Phone 7 Series ever since Microsoft unveiled it at the Mobile World Congress in February. Now, thanks to free developer tools, you can get a first-hand experience of the basic Windows Phone 7 Series devices on your PC. Windows Phone 7 Series represents a huge change in the mobile field for Microsoft, bringing the acclaimed Zune HD UI to an innovative phone platform. Windows Mobile has often been criticized for being behind other Smartphone platforms, but Microsoft seeks to regain the lead with this new upcoming release. A platform must have developers behind it to be useful, so they have released a full set of free development tools so anyone can make apps for it today. Or, if you simply want to play with Windows Phone 7, you can use the included emulator to try out the new Metro UI. Here’s how to do this today on your Vista or 7 computer. Please note: These tools are a Customer Technology Preview release, so only install them if you’re comfortable using pre-release software. Getting Started First, download the Windows Phone Developer Tools CTP (link below), and run the installer. This will install the Customer Technology Preview (CTP) versions of Visual Studio 2010 Express for Windows Phone, Windows Phone Emulator, Silverlight for Windows Phone, and XNA 4.0 Game Studio on your computer, all of which are required and cannot be installed individually. Accept the license agreement when prompted. Click “Install Now” to install the tools you need. The only setup customization option is where to save the files, so choose Customize if you need to do so. Setup will now automatically download and install the components you need, and will additionally download either 32 or 64 bit programs depending on your operating system. About halfway thorough the installation, you’ll be prompted to reboot your system. Once your computer is rebooted, setup will automatically resume without further input. When setup is finished, click “Run the Product Now” to get started. Running Windows Phone 7 on your PC Now that you’ve got the Windows Phone Developer tools installed, it’s time to get the Windows Phone emulator running. If you clicked “Run the Product Now” when the setup finished, Visual Studio 2010 Express for Windows Phone should have already started. If not, simply enter “visual studio” in your start menu search and select “Microsoft Visual Studio 2010 Express for Windows Phone”. Now, to run the Windows Phone 7 emulator, we have to test an application. So, even if you don’t know how to program, we can open a phone application template, and then test it to run the emulator. First, click New Project on the left hand side of the front page. Any of the application templates would work for this, but here let’s select “Windows Phone Application”, and then click Ok. Here’s your new application template, which already contains the basic phone application framework. This is where you’d start if you want to develop a Windows Phone app, but for now we just want to see Windows Phone 7 in action. So, to run the emulator, click Debug in the menu and then select Start Debugging. Your new application will launch inside the Windows Phone 7 Series emulator. The default template doesn’t give us much, but it does show an example application running in Windows Phone 7. Exploring Windows Phone 7 Click the Windows button on the emulator to go to the home screen. Notice the Zune HD-like transition animation. The emulator only includes Internet Explorer, your test application, and a few settings. Click the arrow on the right to see the available applications in a list. Settings lets you change the theme, regional settings, and the date and time in your emulator. It also has an applications settings pane, but this currently isn’t populated. The Time settings shows a unique Windows Phone UI. You can return to the home screen by pressing the Windows button. Here’s the Internet Explorer app running, with the virtual keyboard open to enter an address. Please note that this emulator can also accept input from your keyboard, so you can enter addresses without clicking on the virtual keyboard. And here’s Google running in Internet Explorer on Windows Phone 7. Windows Phone 7 supports accelerometers, and you can simulate this in the emulator. Click one of the rotate buttons to rotate the screen in that direction. Here’s our favorite website in Internet Explorer on Windows Phone 7 in landscape mode. All this, running right inside your Windows 7 desktop… Developer tools for Windows Phone 7 Although it may be fun to play with the Windows Phone 7 emulator, developers will be more excited to actually be able to create new and exciting apps for it. The Windows Phone Developer Tools download includes Visual Studio Express and XNA Game Studio 4.0 which lets you create enticing games and apps for Windows Phones. All development for Windows Phones will be in C#, Silverlight, and the XNA game framework. Visual Studio Express for Windows Phone includes templates for these, and additionally has code samples to help you get started with development. Conclusion Many features are still not functional in this preview version, such as the search button and most of the included applications. However, this still gives you a great way to experience firsthand the future of the Windows Phone platform. And, for developers, this is your chance to set your mark on the Windows Phone 7 Series even before it is released to the public. Happy playing and developing! Links Download Windows Phone Developer Tools CTP Windows Phone Developer Site Similar Articles Productive Geek Tips Keep Track of Homework Assignments with SoshikuWeekend Fun: Watch Television On Your PC With TVUPlayerEasily Manage Your Downloads with Download StatusbarCreate a Shortcut or Hotkey to Mute the System Volume in WindowsHow-To Geek on Lifehacker: How to Make Windows Vista Less Annoying TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

Read the article

Which is Better? The Start Screen in Windows 8 or the Old Start Menu? [Analysis]

- by Asian Angel

There has been quite a bit of controversy surrounding Microsoft’s emphasis on the new Metro UI Start Screen in Windows 8, but when it comes down to it which is really better? The Start Screen in Windows 8 or the old Start Menu? Tech blog 7 Tutorials has done a quick analysis to see which one actually works better (and faster) when launching applications and doing searches. Images courtesy of 7 Tutorials. You can view the results and a comparison table by visiting the blog post linked below. Windows 8 Analysis: Is the Start Screen an Improvement vs. the Start Menu? [7 Tutorials] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

Read the article

Naming PowerPoint Components With A VSTO Add-In

- by Tim Murphy

Note: Cross posted from Coding The Document. Permalink Sometimes in order to work with Open XML we need a little help from other tools. In this post I am going to describe a fairly simple solution for marking up PowerPoint presentations so that they can be used as templates and processed using the Open XML SDK. Add-ins are tools which it can be hard to find information on. I am going to up the obscurity by adding a Ribbon button. For my example I am using Visual Studio 2008 and creating a PowerPoint 2007 Add-in project. To that add a Ribbon Visual Designer. The new ribbon by default will show up on the Add-in tab. Add a button to the ribbon. Also add a WinForm to collect a new name for the object selected. Make sure to set the OK button’s DialogResult to OK. In the ribbon button click event add the following code. ObjectNameForm dialog = new ObjectNameForm(); Selection selection = Globals.ThisAddIn.Application.ActiveWindow.Selection; dialog.objectName = selection.ShapeRange.Name; if (dialog.ShowDialog() == DialogResult.OK) { selection.ShapeRange.Name = dialog.objectName; } This code will first read the current Name attribute of the Shape object. If the user clicks OK on the dialog it save the string value back to the same place. Once it is done you can retrieve identify the control through Open XML via the NonVisualDisplayProperties objects. The only problem is that this object is a child of several different classes. This means that there isn’t just one way to retrieve the value. Below are a couple of pieces of code to identify the container that you have named. The first example is if you are naming placeholders in a layout slide. foreach(var slideMasterPart in slideMasterParts) { var layoutParts = slideMasterPart.SlideLayoutParts; foreach(SlideLayoutPart slideLayoutPart in layoutParts) { foreach (assmPresentation.Shape shape in slideLayoutPart.SlideLayout.CommonSlideData.ShapeTree.Descendants<assmPresentation.Shape>()) { var slideMasterProperties = from p in shape.Descendants<assmPresentation.NonVisualDrawingProperties>() where p.Name == TokenText.Text select p; if (slideMasterProperties.Count() > 0) tokenFound = true; } } } The second example allows you to find charts that you have named with the add-in. foreach(var slidePart in slideParts) { foreach(assmPresentation.Shape slideShape in slidePart.Slide.CommonSlideData.ShapeTree.Descendants<assmPresentation.Shape>()) { var slideProperties = from g in slidePart.Slide.Descendants<GraphicFrame>() where g.NonVisualGraphicFrameProperties.NonVisualDrawingProperties.Name == TokenText.Text select g; if(slideProperties.Count() > 0) { tokenFound = true; } } } Together the combination of Open XML and VSTO add-ins make a powerful combination in creating a process for maintaining a template and generating documents from the template.

Read the article

ASP.NET MVC 3: Implicit and Explicit code nuggets with Razor

- by ScottGu

This is another in a series of posts I’m doing that cover some of the new ASP.NET MVC 3 features: New @model keyword in Razor (Oct 19th) Layouts with Razor (Oct 22nd) Server-Side Comments with Razor (Nov 12th) Razor’s @: and <text> syntax (Dec 15th) Implicit and Explicit code nuggets with Razor (today) In today’s post I’m going to discuss how Razor enables you to both implicitly and explicitly define code nuggets within your view templates, and walkthrough some code examples of each of them. Fluid Coding with Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to the existing .aspx view engine). You can learn more about Razor, why we are introducing it, and the syntax it supports from my Introducing Razor blog post. Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. For example, the Razor snippet below can be used to iterate a collection of products and output a <ul> list of product names that link to their corresponding product pages: When run, the above code generates output like below: Notice above how we were able to embed two code nuggets within the content of the foreach loop. One of them outputs the name of the Product, and the other embeds the ProductID within a hyperlink. Notice that we didn’t have to explicitly wrap these code-nuggets - Razor was instead smart enough to implicitly identify where the code began and ended in both of these situations. How Razor Enables Implicit Code Nuggets Razor does not define its own language. Instead, the code you write within Razor code nuggets is standard C# or VB. This allows you to re-use your existing language skills, and avoid having to learn a customized language grammar. The Razor parser has smarts built into it so that whenever possible you do not need to explicitly mark the end of C#/VB code nuggets you write. This makes coding more fluid and productive, and enables a nice, clean, concise template syntax. Below are a few scenarios that Razor supports where you can avoid having to explicitly mark the beginning/end of a code nugget, and instead have Razor implicitly identify the code nugget scope for you: Property Access Razor allows you to output a variable value, or a sub-property on a variable that is referenced via “dot” notation: You can also use “dot” notation to access sub-properties multiple levels deep: Array/Collection Indexing: Razor allows you to index into collections or arrays: Calling Methods: Razor also allows you to invoke methods: Notice how for all of the scenarios above how we did not have to explicitly end the code nugget. Razor was able to implicitly identify the end of the code block for us. Razor’s Parsing Algorithm for Code Nuggets The below algorithm captures the core parsing logic we use to support “@” expressions within Razor, and to enable the implicit code nugget scenarios above: Parse an identifier - As soon as we see a character that isn't valid in a C# or VB identifier, we stop and move to step 2 Check for brackets - If we see "(" or "[", go to step 2.1., otherwise, go to step 3 Parse until the matching ")" or "]" (we track nested "()" and "[]" pairs and ignore "()[]" we see in strings or comments) Go back to step 2 Check for a "." - If we see one, go to step 3.1, otherwise, DO NOT ACCEPT THE "." as code, and go to step 4 If the character AFTER the "." is a valid identifier, accept the "." and go back to step 1, otherwise, go to step 4 Done! Differentiating between code and content Step 3.1 is a particularly interesting part of the above algorithm, and enables Razor to differentiate between scenarios where an identifier is being used as part of the code statement, and when it should instead be treated as static content: Notice how in the snippet above we have ? and ! characters at the end of our code nuggets. These are both legal C# identifiers – but Razor is able to implicitly identify that they should be treated as static string content as opposed to being part of the code expression because there is whitespace after them. This is pretty cool and saves us keystrokes. Explicit Code Nuggets in Razor Razor is smart enough to implicitly identify a lot of code nugget scenarios. But there are still times when you want/need to be more explicit in how you scope the code nugget expression. The @(expression) syntax allows you to do this: You can write any C#/VB code statement you want within the @() syntax. Razor will treat the wrapping () characters as the explicit scope of the code nugget statement. Below are a few scenarios where we could use the explicit code nugget feature: Perform Arithmetic Calculation/Modification: You can perform arithmetic calculations within an explicit code nugget: Appending Text to a Code Expression Result: You can use the explicit expression syntax to append static text at the end of a code nugget without having to worry about it being incorrectly parsed as code: Above we have embedded a code nugget within an <img> element’s src attribute. It allows us to link to images with URLs like “/Images/Beverages.jpg”. Without the explicit parenthesis, Razor would have looked for a “.jpg” property on the CategoryName (and raised an error). By being explicit we can clearly denote where the code ends and the text begins. Using Generics and Lambdas Explicit expressions also allow us to use generic types and generic methods within code expressions – and enable us to avoid the <> characters in generics from being ambiguous with tag elements. One More Thing….Intellisense within Attributes We have used code nuggets within HTML attributes in several of the examples above. One nice feature supported by the Razor code editor within Visual Studio is the ability to still get VB/C# intellisense when doing this. Below is an example of C# code intellisense when using an implicit code nugget within an <a> href=”” attribute: Below is an example of C# code intellisense when using an explicit code nugget embedded in the middle of a <img> src=”” attribute: Notice how we are getting full code intellisense for both scenarios – despite the fact that the code expression is embedded within an HTML attribute (something the existing .aspx code editor doesn’t support). This makes writing code even easier, and ensures that you can take advantage of intellisense everywhere. Summary Razor enables a clean and concise templating syntax that enables a very fluid coding workflow. Razor’s ability to implicitly scope code nuggets reduces the amount of typing you need to perform, and leaves you with really clean code. When necessary, you can also explicitly scope code expressions using a @(expression) syntax to provide greater clarity around your intent, as well as to disambiguate code statements from static markup. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Solaris 10 branded zone VM Templates for Solaris 11 on OTN

- by jsavit

Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

Read the article

Security Talk Webcast: Agile Security - Develop Code Rapidly and Securely with SDL-Agile

Find out how SDL and Agile can be made to work well together - and in many ways actually work better together than separately. Get an in-depth look at the new MSF-Agile+SDL process template for Visual Studio Team System that can help development teams integrate SDL-Agile tasks directly into their Visual Studio development environments....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Setting up a local AI server - easy with Solaris 11

- by Stefan Hinker

Many things are new in Solaris 11, Autoinstall is one of them. If, like me, you've known Jumpstart for the last 2 centuries or so, you'll have to start from scratch. Well, almost, as the concepts are similar, and it's not all that difficult. Just new. I wanted to have an AI server that I could use for demo purposes, on the train if need be. That answers the question of hardware requirements: portable. But let's start at the beginning. First, you need an OS image, of course. In the new world of Solaris 11, it is now called a repository. The original can be downloaded from the Solaris 11 page at Oracle. What you want is the "Oracle Solaris 11 11/11 Repository Image", which comes in two parts that can be combined using cat. MD5 checksums for these (and all other downloads from that page) are available closer to the top of the page. With that, building the repository is quick and simple: # zfs create -o mountpoint=/export/repo rpool/ai/repo # zfs create rpool/ai/repo/s11 # mount -o ro -F hsfs /tmp/sol-11-1111-repo-full.iso /mnt # rsync -aP /mnt/repo /export/repo/s11 # umount /mnt # pkgrepo rebuild -s /export/repo/sol11/repo # zfs snapshot rpool/ai/repo/sol11@fcs # pkgrepo info -s /export/repo/sol11/repo PUBLISHER PACKAGES STATUS UPDATED solaris 4292 online 2012-03-12T20:47:15.378639Z That's all there's to it. Let's make a snapshot, just to be on the safe side. You never know when one will come in handy. To use this repository, you could just add it as a file-based publisher: # pkg set-publisher -g file:///export/repo/sol11/repo solaris In case I'd want to access this repository through a (virtual) network, i'll now quickly activate the repository-service: # svccfg -s application/pkg/server \ setprop pkg/inst_root=/export/repo/sol11/repo # svccfg -s application/pkg/server setprop pkg/readonly=true # svcadm refresh application/pkg/server # svcadm enable application/pkg/server That's all you need - now point your browser to http://localhost/ to view your beautiful repository-server. Step 1 is done. All of this, by the way, is nicely documented in the README file that's contained in the repository image. Of course, we already have updates to the original release. You can find them in MOS in the Oracle Solaris 11 Support Repository Updates (SRU) Index. You can simply add these to your existing repository or create separate repositories for each SRU. The individual SRUs are self-sufficient and incremental - SRU4 includes all updates from SRU2 and SRU3. With ZFS, you can also get both: A full repository with all updates and at the same time incremental ones up to each of the updates: # mount -o ro -F hsfs /tmp/sol-11-1111-sru4-05-incr-repo.iso /mnt # pkgrecv -s /mnt/repo -d /export/repo/sol11/repo '*' # umount /mnt # pkgrepo rebuild -s /export/repo/sol11/repo # zfs snapshot rpool/ai/repo/sol11@sru4 # zfs set snapdir=visible rpool/ai/repo/sol11 # svcadm restart svc:/application/pkg/server:default The normal repository is now updated to SRU4. Thanks to the ZFS snapshots, there is also a valid repository of Solaris 11 11/11 without the update located at /export/repo/sol11/.zfs/snapshot/fcs . If you like, you can also create another repository service for each update, running on a separate port. But now lets continue with the AI server. Just a little bit of reading in the dokumentation makes it clear that we will need to run a DHCP server for this. Since I already have one active (for my SunRay installation) and since it's a good idea to have these kinds of services separate anyway, I decided to create this in a Zone. So, let's create one first: # zfs create -o mountpoint=/export/install rpool/ai/install # zfs create -o mountpoint=/zones rpool/zones # zonecfg -z ai-server zonecfg:ai-server> create create: Using system default template 'SYSdefault' zonecfg:ai-server> set zonepath=/zones/ai-server zonecfg:ai-server> add dataset zonecfg:ai-server:dataset> set name=rpool/ai/install zonecfg:ai-server:dataset> set alias=install zonecfg:ai-server:dataset> end zonecfg:ai-server> commit zonecfg:ai-server> exit # zoneadm -z ai-server install # zoneadm -z ai-server boot ; zlogin -C ai-server Give it a hostname and IP address at first boot, and there's the Zone. For a publisher for Solaris packages, it will be bound to the "System Publisher" from the Global Zone. The /export/install filesystem, of course, is intended to be used by the AI server. Let's configure it now: #zlogin ai-server root@ai-server:~# pkg install install/installadm root@ai-server:~# installadm create-service -n x86-fcs -a i386 \ -s pkg://solaris/install-image/[email protected],5.11-0.175.0.0.0.2.1482 \ -d /export/install/fcs -i 192.168.2.20 -c 3 With that, the core AI server is already done. What happened here? First, I installed the AI server software. IPS makes that nice and easy. If necessary, it'll also pull in the required DHCP-Server and anything else that might be missing. Watch out for that DHCP server software. In Solaris 11, there are two different versions. There's the one you might know from Solaris 10 and earlier, and then there's a new one from ISC. The latter is the one we need for AI. The SMF service names of both are very similar. The "old" one is "svc:/network/dhcp-server:default". The ISC-server comes with several SMF-services. We at least need "svc:/network/dhcp/server:ipv4". The command "installadm create-service" creates the installation-service. It's called "x86-fcs", serves the "i386" architecture and gets its boot image from the repository of the system publisher, using version 5.11,5.11-0.175.0.0.0.2.1482, which is Solaris 11 11/11. (The option "-a i386" in this example is optional, since the installserver itself runs on a x86 machine.) The boot-environment for clients is created in /export/install/fcs and the DHCP-server is configured for 3 IP-addresses starting at 192.168.2.20. This configuration is stored in a very human readable form in /etc/inet/dhcpd4.conf. An AI-service for SPARC systems could be created in the very same way, using "-a sparc" as the architecture option. Now we would be ready to register and install the first client. It would be installed with the default "solaris-large-server" using the publisher "http://pkg.oracle.com/solaris/release" and would query it's configuration interactively at first boot. This makes it very clear that an AI-server is really only a boot-server. The true source of packets to install can be different. Since I don't like these defaults for my demo setup, I did some extra config work for my clients. The configuration of a client is controlled by manifests and profiles. The manifest controls which packets are installed and how the filesystems are layed out. In that, it's very much like the old "rules.ok" file in Jumpstart. Profiles contain additional configuration like root passwords, primary user account, IP addresses, keyboard layout etc. Hence, profiles are very similar to the old sysid.cfg file. The easiest way to get your hands on a manifest is to ask the AI server we just created to give us it's default one. Then modify that to our liking and give it back to the installserver to use: root@ai-server:~# mkdir -p /export/install/configs/manifests root@ai-server:~# cd /export/install/configs/manifests root@ai-server:~# installadm export -n x86-fcs -m orig_default \ -o orig_default.xml root@ai-server:~# cp orig_default.xml s11-fcs.small.local.xml root@ai-server:~# vi s11-fcs.small.local.xml root@ai-server:~# more s11-fcs.small.local.xml <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install> <ai_instance name="S11 Small fcs local"> <target> <logical> <zpool name="rpool" is_root="true"> <filesystem name="export" mountpoint="/export"/> <filesystem name="export/home"/> <be name="solaris"/> </zpool> </logical> </target> <software type="IPS"> <destination> <image>  <facet set="false">facet.locale.*</facet> <facet set="true">facet.locale.de</facet> <facet set="true">facet.locale.de_DE</facet> <facet set="true">facet.locale.en</facet> <facet set="true">facet.locale.en_US</facet> </image> </destination> <source> <publisher name="solaris"> <origin name="http://192.168.2.12/"/> </publisher> </source>  <software_data action="install"> <name>pkg:/[email protected],5.11-0.175.0.0.0.2.0</name> <name>pkg:/group/system/solaris-small-server</name> </software_data> </software> </ai_instance> </auto_install> root@ai-server:~# installadm create-manifest -n x86-fcs -d \ -f ./s11-fcs.small.local.xml root@ai-server:~# installadm list -m -n x86-fcs Manifest Status Criteria -------- ------ -------- S11 Small fcs local Default None orig_default Inactive None The major points in this new manifest are: Install "solaris-small-server" Install a few locales less than the default. I'm not that fluid in French or Japanese... Use my own package service as publisher, running on IP address 192.168.2.12 Install the initial release of Solaris 11: pkg:/[email protected],5.11-0.175.0.0.0.2.0 Using a similar approach, I'll create a default profile interactively and use it as a template for a few customized building blocks, each defining a part of the overall system configuration. The modular approach makes it easy to configure numerous clients later on: root@ai-server:~# mkdir -p /export/install/configs/profiles root@ai-server:~# cd /export/install/configs/profiles root@ai-server:~# sysconfig create-profile -o default.xml root@ai-server:~# cp default.xml general.xml; cp default.xml mars.xml root@ai-server:~# cp default.xml user.xml root@ai-server:~# vi general.xml mars.xml user.xml root@ai-server:~# more general.xml mars.xml user.xml :::::::::::::: general.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="system/timezone"> <instance enabled="true" name="default"> <property_group type="application" name="timezone"> <propval type="astring" name="localtime" value="Europe/Berlin"/> </property_group> </instance> </service> <service version="1" type="service" name="system/environment"> <instance enabled="true" name="init"> <property_group type="application" name="environment"> <propval type="astring" name="LANG" value="C"/> </property_group> </instance> </service> <service version="1" type="service" name="system/keymap"> <instance enabled="true" name="default"> <property_group type="system" name="keymap"> <propval type="astring" name="layout" value="US-English"/> </property_group> </instance> </service> <service version="1" type="service" name="system/console-login"> <instance enabled="true" name="default"> <property_group type="application" name="ttymon"> <propval type="astring" name="terminal_type" value="vt100"/> </property_group> </instance> </service> <service version="1" type="service" name="network/physical"> <instance enabled="true" name="default"> <property_group type="application" name="netcfg"> <propval type="astring" name="active_ncp" value="DefaultFixed"/> </property_group> </instance> </service> <service version="1" type="service" name="system/name-service/switch"> <property_group type="application" name="config"> <propval type="astring" name="default" value="files"/> <propval type="astring" name="host" value="files dns"/> <propval type="astring" name="printer" value="user files"/> </property_group> <instance enabled="true" name="default"/> </service> <service version="1" type="service" name="system/name-service/cache"> <instance enabled="true" name="default"/> </service> <service version="1" type="service" name="network/dns/client"> <property_group type="application" name="config"> <property type="net_address" name="nameserver"> <net_address_list> <value_node value="192.168.2.1"/> </net_address_list> </property> </property_group> <instance enabled="true" name="default"/> </service> </service_bundle> :::::::::::::: mars.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="network/install"> <instance enabled="true" name="default"> <property_group type="application" name="install_ipv4_interface"> <propval type="astring" name="address_type" value="static"/> <propval type="net_address_v4" name="static_address" value="192.168.2.100/24"/> <propval type="astring" name="name" value="net0/v4"/> <propval type="net_address_v4" name="default_route" value="192.168.2.1"/> </property_group> <property_group type="application" name="install_ipv6_interface"> <propval type="astring" name="stateful" value="yes"/> <propval type="astring" name="stateless" value="yes"/> <propval type="astring" name="address_type" value="addrconf"/> <propval type="astring" name="name" value="net0/v6"/> </property_group> </instance> </service> <service version="1" type="service" name="system/identity"> <instance enabled="true" name="node"> <property_group type="application" name="config"> <propval type="astring" name="nodename" value="mars"/> </property_group> </instance> </service> </service_bundle> :::::::::::::: user.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="system/config-user"> <instance enabled="true" name="default"> <property_group type="application" name="root_account"> <propval type="astring" name="login" value="root"/> <propval type="astring" name="password" value="noIWillNotTellYouMyPasswordNotEvenEncrypted"/> <propval type="astring" name="type" value="role"/> </property_group> <property_group type="application" name="user_account"> <propval type="astring" name="login" value="stefan"/> <propval type="astring" name="password" value="noIWillNotTellYouMyPasswordNotEvenEncrypted"/> <propval type="astring" name="type" value="normal"/> <propval type="astring" name="description" value="Stefan Hinker"/> <propval type="count" name="uid" value="12345"/> <propval type="count" name="gid" value="10"/> <propval type="astring" name="shell" value="/usr/bin/bash"/> <propval type="astring" name="roles" value="root"/> <propval type="astring" name="profiles" value="System Administrator"/> <propval type="astring" name="sudoers" value="ALL=(ALL) ALL"/> </property_group> </instance> </service> </service_bundle> root@ai-server:~# installadm create-profile -n x86-fcs -f general.xml root@ai-server:~# installadm create-profile -n x86-fcs -f user.xml root@ai-server:~# installadm create-profile -n x86-fcs -f mars.xml \ -c ipv4=192.168.2.100 root@ai-server:~# installadm list -p Service Name Profile ------------ ------- x86-fcs general.xml mars.xml user.xml root@ai-server:~# installadm list -n x86-fcs -p Profile Criteria ------- -------- general.xml None mars.xml ipv4 = 192.168.2.100 user.xml None Here's the idea behind these files: "general.xml" contains settings valid for all my clients. Stuff like DNS servers, for example, which in my case will always be the same. "user.xml" only contains user definitions. That is, a root password and a primary user.Both of these profiles will be valid for all clients (for now). "mars.xml" defines network settings for an individual client. This profile is associated with an IP-Address. For this to work, I'll have to tweak the DHCP-settings in the next step: root@ai-server:~# installadm create-client -e 08:00:27:AA:3D:B1 -n x86-fcs root@ai-server:~# vi /etc/inet/dhcpd4.conf root@ai-server:~# tail -5 /etc/inet/dhcpd4.conf host 080027AA3DB1 { hardware ethernet 08:00:27:AA:3D:B1; fixed-address 192.168.2.100; filename "01080027AA3DB1"; } This completes the client preparations. I manually added the IP-Address for mars to /etc/inet/dhcpd4.conf. This is needed for the "mars.xml" profile. Disabling arbitrary DHCP-replies will shut up this DHCP server, making my life in a shared environment a lot more peaceful ;-)Now, I of course want this installation to be completely hands-off. For this to work, I'll need to modify the grub boot menu for this client slightly. You can find it in /etc/netboot. "installadm create-client" will create a new boot menu for every client, identified by the client's MAC address. The template for this can be found in a subdirectory with the name of the install service, /etc/netboot/x86-fcs in our case. If you don't want to change this manually for every client, modify that template to your liking instead. root@ai-server:~# cd /etc/netboot root@ai-server:~# cp menu.lst.01080027AA3DB1 menu.lst.01080027AA3DB1.org root@ai-server:~# vi menu.lst.01080027AA3DB1 root@ai-server:~# diff menu.lst.01080027AA3DB1 menu.lst.01080027AA3DB1.org 1,2c1,2 < default=1 < timeout=10 --- > default=0 > timeout=30 root@ai-server:~# more menu.lst.01080027AA3DB1 default=1 timeout=10 min_mem64=0 title Oracle Solaris 11 11/11 Text Installer and command line kernel$ /x86-fcs/platform/i86pc/kernel/$ISADIR/unix -B install_media=htt p://$serverIP:5555//export/install/fcs,install_service=x86-fcs,install_svc_addre ss=$serverIP:5555 module$ /x86-fcs/platform/i86pc/$ISADIR/boot_archive title Oracle Solaris 11 11/11 Automated Install kernel$ /x86-fcs/platform/i86pc/kernel/$ISADIR/unix -B install=true,inst all_media=http://$serverIP:5555//export/install/fcs,install_service=x86-fcs,inst all_svc_address=$serverIP:5555,livemode=text module$ /x86-fcs/platform/i86pc/$ISADIR/boot_archive Now just boot the client off the network using PXE-boot. For my demo purposes, that's a client from VirtualBox, of course. That's all there's to it. And despite the fact that this blog entry is a little longer - that wasn't that hard now, was it?

Read the article

100 Yen Is an Intriguing Look at Japan’s Video Arcade Culture

- by Jason Fitzpatrick

While the video arcade culture of the 1970s and 80s has largely vanished from the American landscape, it’s alive and well in Japan–100 Yen: A Japanese Arcade Experience is a documentary exploring Japan’s still thriving arcade sub-culture. The documentary explores aspects of Japan’s arcade gaming culture ranging from the current experiences of arcade gamers to the factors that bring them together (like limited residential spaces to game in and urban-centered lifestyles). For more information about the film, hit up the link below. For quotes from the guys behind the documentary, hit up this article at Wired magazine. 100 Yen: The Japanese Arcade Experience [via Wired] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

Read the article

Silverlight Cream for March 22, 2010 -- #817

- by Dave Campbell

In this Issue: Bart Czernicki, Tim Greenfield, Andrea Boschin(-2-), AfricanGeek, Fredrik Normén, Ian Griffiths, Christian Schormann, Pete Brown, Jeff Handley, Brad Abrams, and Tim Heuer. Shoutout: At the beginning of MIX10, Brad Abrams reported Silverlight 4 and RIA Services Release Candidate Available NOW From SilverlightCream.com: Using the Bing Maps Silverlight control on the Windows Phone 7 Bart Czernicki has a very cool BingMaps and WP7 tutorial up... you're going to want to bookmark this one for sure! Code included and external links... thanks Bart! Silverlight Rx DataClient within MVVM Tim Greenfield has a great post up about Rx and MVVM with Silverlight 3. Lots of good insight into Rx and interesting code bits. SilverVNC - a VNC Viewer with Silverlight 4.0 RC Andrea Boschin digs into Silverlight 4 RC and it's full-trust on sockets and builds an implementation of RFB protocol... give it a try and give Andrea some feedback. Chromeless Window for OOB applications in Silverlight 4.0 RC Andrea Boschin also has a post up on investigating the OOB no-chrome features in SL4RC. Windows Phone 7 and WCF AfricanGeek has his latest video tutorial up and it's on WCF and WP7... I've got a feeling we're all going to have to get our arms around this. Some steps for moving WCF RIA Services Preveiw to the RC version Fredrik Normén details his steps in transitioning to the RC version of RIA Services. Silverlight Business Apps: Module 8.5 - The Value of MEF with Silverlight Ian Griffiths has a video tutorial up at Channel 9 on MEF and Silverlight, posted by John Papa Introducing Blend 4 – For Silverlight, WPF and Windows Phone Christian Schormann has an early MIX10 post up about te new features in Expression Blend with regard to Silverlight, WPF, and WP7. Building your first Silverlight for Windows Phone Application Pete Brown has his first post up on building a WP7 app with the MIX10 bits. Lookups in DataGrid and DataForm with RIA Services Jeff Handley elaborates on a post by someone else about using lookup data in the DataGrid and DataForm with RIA Services Silverlight 4 + RIA Services - Ready for Business: Starting a New Project with the Business Application Template Brad Abrams is starting a series highlighting the key features of Silverlight 4 and RIA with the new releases. He has a post up Silverlight 4 + RIA Services - Ready for Business: Index, including links and source. Then in this first post of the series, he introduces the Business Application Template. Custom Window Chrome and Events Watch a tutorial video by Tim Heuer on creating custom chrome for OOB apps. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

- by nmgomes

The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters>  <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections>  <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections>  <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers>  <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute">  <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

Read the article

jQuery Templates in ASP.NET - Blogs Series

- by hajan

In the previous days, I wrote several blog posts related to the great jQuery Templates plugin showing various examples that might help you get started working with the plugin in ASP.NET and VS.NET environment. Here is the list of all five blogs: Introduction to jQuery Templates jQuery Templates - tmpl(), template() and tmplItem() jQuery Templates - {Supported Tags} jQuery Templates with ASP.NET MVC jQuery Templates - XHTML Validation Thank you for reading and wait for my next blogs! All the best, Hajan

Read the article

SharePoint 2010 Replaceable Parameter, some observations…

- by svdoever

SharePoint Tools for Visual Studio 2010 provides a rudimentary mechanism for replaceable parameters that you can use in files that are not compiled, like ascx files and your project property settings. The basics on this can be found in the documentation at http://msdn.microsoft.com/en-us/library/ee231545.aspx. There are some quirks however. For example: My Package name is MacawMastSP2010Templates, as defined in my Package properties: I want to use the $SharePoint.Package.Name$ replaceable parameter in my feature properties. But this parameter does not work in the “Deployment Path” property, while other parameters work there, while it works in the “Image Url” property. It just does not get expanded. So I had to resort to explicitly naming the first path of the deployment path: : You also see a special property for the “Receiver Class” in the format $SharePoint.Type.<GUID>.FullName$. The documentation gives the following description:The full name of the type matching the GUID in the token. The format of the GUID is lowercase and corresponds to the Guid.ToString(“D”) format (that is, xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx). Not very clear. After some searching it happened to be the guid as declared in my feature receiver code: In other properties you see a different set of replaceable parameters: We use a similar mechanism for replaceable parameter for years in our Macaw Solutions Factory for SharePoint 2007 development, where each replaceable parameter is a PowerShell function. This provides so much more power. For example in a feature declaration we can say: Code Snippet <?xml version="1.0" encoding="utf-8" ?>  <Feature Id="[[$Feature.SampleFeature.ID]]" Title="MAST [[$MastSolutionName]] Sample Feature" Description="The MAST [[$MastSolutionName]] Sample Feature, where all possible elements in a feature are showcased" Version="1.0.0.0" Scope="Site" Hidden="FALSE" ImageUrl="[[FeatureImage]]" ReceiverAssembly="[[FeatureReceiverAssemblySignature]]" ReceiverClass="[[FeatureReceiverClass]]" xmlns="http://schemas.microsoft.com/sharepoint/"> <ElementManifests> <ElementManifest Location="ExampleCustomActions.xml" /> <ElementManifest Location="ExampleSiteColumns.xml" /> <ElementManifest Location="ExampleContentTypes.xml" /> <ElementManifest Location="ExampleDocLib.xml" /> <ElementManifest Location="ExampleMasterPages.xml" />  [[GenerateXmlNodesForFiles -path 'ExampleDocLib\*.*' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]] [[GenerateXmlNodesForFiles -path 'ExampleMasterPages\*.*' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]] [[GenerateXmlNodesForFiles -path 'Resources\*.resx' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]] </ElementManifests> </Feature> We have a solution level PowerShell script file named TemplateExpansionConfiguration.ps1 where we declare our variables (starting with a $) and include helper functions: Code Snippet # ============================================================================================== # NAME: product:\src\Wss3\Templates\TemplateExpansionConfiguration.ps1 # # AUTHOR: Serge van den Oever, Macaw # DATE : May 24, 2007 # # COMMENT: # Nota bene: define variable and function definitions global to be visible during template expansion. # # ============================================================================================== Set-PSDebug -strict -trace 0 #variables must have value before usage $global:ErrorActionPreference = 'Stop' # Stop on errors $global:VerbosePreference = 'Continue' # set to SilentlyContinue to get no verbose output # Load template expansion utility functions . product:\tools\Wss3\MastDeploy\TemplateExpansionUtil.ps1 # If exists add solution expansion utility functions $solutionTemplateExpansionUtilFile = $MastSolutionDir + "\TemplateExpansionUtil.ps1" if ((Test-Path -Path $solutionTemplateExpansionUtilFile)) { . $solutionTemplateExpansionUtilFile } # ============================================================================================== # Expected: $Solution.ID; Unique GUID value identifying the solution (DON'T INCLUDE BRACKETS). # function: guid:UpperCaseWithoutCurlies -guid '{...}' ensures correct syntax $global:Solution = @{ ID = GuidUpperCaseWithoutCurlies -guid '{d366ced4-0b98-4fa8-b256-c5a35bcbc98b}'; } # DON'T INCLUDE BRACKETS for feature id's!!! # function: GuidUpperCaseWithoutCurlies -guid '{...}' ensures correct syntax $global:Feature = @{ SampleFeature = @{ ID = GuidUpperCaseWithoutCurlies -guid '{35de59f4-0c8e-405e-b760-15234fe6885c}'; } } $global:SiteDefinition = @{ TemplateBlankSite = @{ ID = '12346'; } } # To inherit from this content type add the delimiter (00) and then your own guid # ID: <base>00<newguid> $global:ContentType = @{ ExampleContentType = @{ ID = '0x01008e5e167ba2db4bfeb3810c4a7ff72913'; } } # INCLUDE BRACKETS for column id's and make them LOWER CASE!!! # function: GuidLowerCaseWithCurlies -guid '{...}' ensures correct syntax $global:SiteColumn = @{ ExampleChoiceField = @{ ID = GuidLowerCaseWithCurlies -guid '{69d38ce4-2771-43b4-a861-f14247885fe9}'; }; ExampleBooleanField = @{ ID = GuidLowerCaseWithCurlies -guid '{76f794e6-f7bd-490e-a53e-07efdf967169}'; }; ExampleDateTimeField = @{ ID = GuidLowerCaseWithCurlies -guid '{6f176e6e-22d2-453a-8dad-8ab17ac12387}'; }; ExampleNumberField = @{ ID = GuidLowerCaseWithCurlies -guid '{6026947f-f102-436b-abfd-fece49495788}'; }; ExampleTextField = @{ ID = GuidLowerCaseWithCurlies -guid '{23ca1c29-5ef0-4b3d-93cd-0d1d2b6ddbde}'; }; ExampleUserField = @{ ID = GuidLowerCaseWithCurlies -guid '{ee55b9f1-7b7c-4a7e-9892-3e35729bb1a5}'; }; ExampleNoteField = @{ ID = GuidLowerCaseWithCurlies -guid '{f9aa8da3-1f30-48a6-a0af-aa0a643d9ed4}'; }; } This gives so much more possibilities, like for example the elements file expansion where a PowerShell function iterates through a folder and generates the required XML nodes. I think I will bring back this mechanism, so it can work together with the built-in replaceable parameters, there are hooks to define you custom replacements as described by Waldek in this blog post.

Read the article

MVC 3 AdditionalMetadata Attribute with ViewBag to Render Dynamic UI

- by Steve Michelotti

A few months ago I blogged about using Model metadata to render a dynamic UI in MVC 2. The scenario in the post was that we might have a view model where the questions are conditionally displayed and therefore a dynamic UI is needed. To recap the previous post, the solution was to use a custom attribute called [QuestionId] in conjunction with an “ApplicableQuestions” collection to identify whether each question should be displayed. This allowed me to have a view model that looked like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [QuestionId("NB0021")] 4: public string FirstName { get; set; } 5: 6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [QuestionId("NB0022")] 9: public string LastName { get; set; } 10: 11: [UIHint("ScalarQuestion")] 12: [QuestionId("NB0023")] 13: public int Age { get; set; } 14: 15: public IEnumerable<string> ApplicableQuestions { get; set; } At the same time, I was able to avoid repetitive IF statements for every single question in my view: 1: <%: Html.EditorFor(m => m.FirstName, new { applicableQuestions = Model.ApplicableQuestions })%> 2: <%: Html.EditorFor(m => m.LastName, new { applicableQuestions = Model.ApplicableQuestions })%> 3: <%: Html.EditorFor(m => m.Age, new { applicableQuestions = Model.ApplicableQuestions })%> by creating an Editor Template called “ScalarQuestion” that encapsulated the IF statement: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <%@ Import Namespace="DynamicQuestions.Models" %> 3: <%@ Import Namespace="System.Linq" %> 4: <% 5: var applicableQuestions = this.ViewData["applicableQuestions"] as IEnumerable<string>; 6: var questionAttr = this.ViewData.ModelMetadata.ContainerType.GetProperty(this.ViewData.ModelMetadata.PropertyName).GetCustomAttributes(typeof(QuestionIdAttribute), true) as QuestionIdAttribute[]; 7: string questionId = null; 8: if (questionAttr.Length > 0) 9: { 10: questionId = questionAttr[0].Id; 11: } 12: if (questionId != null && applicableQuestions.Contains(questionId)) { %> 13: <div> 14: <%: Html.Label("") %> 15: <%: Html.TextBox("", this.Model)%> 16: </div> 17: <% } %> You might want to go back and read the full post in order to get the full context. MVC 3 offers a couple of new features that make this scenario more elegant to implement. The first step is to use the new [AdditionalMetadata] attribute which, so far, appears to be an under appreciated new feature of MVC 3. With this attribute, I don’t need my custom [QuestionId] attribute anymore - now I can just write my view model like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [AdditionalMetadata("QuestionId", "NB0021")] 4: public string FirstName { get; set; } 5: 6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [AdditionalMetadata("QuestionId", "NB0022")] 9: public string LastName { get; set; } 10: 11: [UIHint("ScalarQuestion")] 12: [AdditionalMetadata("QuestionId", "NB0023")] 13: public int Age { get; set; } Thus far, the documentation seems to be pretty sparse on the AdditionalMetadata attribute. It’s buried in the Other New Features section of the MVC 3 home page and, after showing the attribute on a view model property, it just says, “This metadata is made available to any display or editor template when a product view model is rendered. It is up to you to interpret the metadata information.” But what exactly does it look like for me to “interpret the metadata information”? Well, it turns out it makes the view much easier to work with. Here is the re-implemented ScalarQuestion template updated for MVC 3 and Razor: 1: @{ 2: object questionId; 3: ViewData.ModelMetadata.AdditionalValues.TryGetValue("QuestionId", out questionId); 4: if (ViewBag.applicableQuestions.Contains((string)questionId)) { 5: <div> 6: @Html.LabelFor(m => m) 7: @Html.TextBoxFor(m => m) 8: </div> 9: } 10: } So we’ve gone from 17 lines of code (in the MVC 2 version) to about 7-8 lines of code here. The first thing to notice is that in MVC 3 we now have a property called “AdditionalValues” that hangs off of the ModelMetadata property. This is automatically populated by any [AdditionalMetadata] attributes on the property. There is no more need for me to explicitly write Reflection code to GetCustomAttributes() and then check to see if those attributes were present. I can just call TryGetValue() on the dictionary to see if they were present. Secondly, the “applicableQuestions” anonymous type that I passed in from the calling view – in MVC 3 I now have a dynamic ViewBag property where I can just “dot into” the applicableQuestions with a nicer syntax than dictionary square bracket syntax. And there’s no problems calling the Contains() method on this dynamic object because at runtime the DLR has resolved that it is a generic List<string>. At this point you might be saying that, yes the view got much nicer than the MVC 2 version, but my view model got slightly worse. In the previous version I had a nice [QuestionId] attribute but now, with the [AdditionalMetadata] attribute, I have to type the string “QuestionId” for every single property and hope that I don’t make a typo. Well, the good news is that it’s easy to create your own attributes that can participate in the metadata’s additional values. The key is that the attribute must implement that IMetadataAware interface and populate the AdditionalValues dictionary in the OnMetadataCreated() method: 1: public class QuestionIdAttribute : Attribute, IMetadataAware 2: { 3: public string Id { get; set; } 4: 5: public QuestionIdAttribute(string id) 6: { 7: this.Id = id; 8: } 9: 10: public void OnMetadataCreated(ModelMetadata metadata) 11: { 12: metadata.AdditionalValues["QuestionId"] = this.Id; 13: } 14: } This now allows me to encapuslate my “QuestionId” string in just one place and get back to my original attribute which can be used like this: [QuestionId(“NB0021”)]. The [AdditionalMetadata] attribute is a powerful and under-appreciated new feature of MVC 3. Combined with the dynamic ViewBag property, you can do some really interesting things with your applications with less code and ceremony.

Read the article

Welcome to my geeks blog

- by bconlon

Hi and welcome! I'm Bazza and this is my geeks blog. I have 20 years Visual Studio mainly C++, MFC, ATL and now, thankfully, C# and I am embarking on the new world (well new to me) of WPF, so I thought I would try and capture my successful...and not so successful...WPF experiences with the geek world. So where to start? WPF? What I know so far... From wiki..."Windows Presentation Foundation (or WPF) is a graphical subsystem for rendering user interfaces in Windows-based applications." Hmm, great but didn't MFC, ATL (my head hurt with that one), and .Net all have APIs to allow me to code against the Windows Graphical Device Interface (GDI)? "Rather than relying on the older GDI subsystem, WPF utilizes DirectX. WPF attempts to provide a consistent programming model for building applications and provides a separation between the user interface and the business logic." OK, different drawing code, same Windows and weren't we always taught to separate our UI, Business Layer and Data Access Layer? "WPF employs XAML, a derivative of XML, to define and link various UI elements. WPF applications can be deployed as standalone desktop programs, or hosted as an embedded object in a website." Cool, now we're getting somewhere. So when they say separation they really mean separation. The crux of this appears to be that you can have creative people writing the UI and making it attractive and intuitive to use, whist the geeks concentrate on writing the Business and Data Access stuff. XAML (eXtensible Application Markup Language) maps XML elements and attributes directly to Common Language Runtime (CLR) object instances, properties and events. True separation of the View and Model. WPF also provides logical separation of a control from its appearance. In a traditional Windows system, all Controls have a base class containing a Windows handle and each Control knows how to render itself. In WPF, the controls are more like those in a Web Browser using Cascading Style Sheet, they are not wrappers for standard Windows Controls. Instead, they have a default 'template' that defines a visual theme which can easily be replaced by a custom template. But it gets better. WPF concentrates heavily on Data Binding where the client can bind directly to data on the server. I think this concept was first introduced in 'Classic' Visual Basic, where you could bind a list directly to a data from an Access database, and you could do similar in ASP .Net. However, the WPF implementation is far superior than it's predecessors. There are also other technologies that I want to look at like LINQ and the Entity Framework, but that's all for now. #

Read the article

Customize Team Build 2010 – Part 13: Get control over the Build Output

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. UPDATE 13-12-2010: Thanks to Jason Pricket, it is now also possible to not show every activity in the build log. This is really useful when you are doing for-loops in your template. To see how you can do that, check out Jason's blog: http://blogs.msdn.com/b/jpricket/archive/2010/12/09/tfs-2010-making-your-build-log-less-noisy.aspx Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this. [BuildActivity(HostEnvironmentOption.All)] public sealed class AddHyperlinkToBuildOutput : CodeActivity { [RequiredArgument] public InArgument<IBuildDetail> BuildDetail { get; set; } [RequiredArgument] public InArgument<string> DisplayText { get; set; } [RequiredArgument] public InArgument<string> Url { get; set; } protected override void Execute(CodeActivityContext context) { // Obtain the runtime value of the input arguments IBuildDetail buildDetail = context.GetValue(this.BuildDetail); string displayText = context.GetValue(this.DisplayText); string url = context.GetValue(this.Url); // Add the hyperlink buildDetail.Information.AddExternalLink(displayText, new Uri(url)); buildDetail.Information.Save(); } } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node. IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode(); childNode.Type = currentTracking.Node.Type; childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step"); buildStep.FinishTime = DateTime.Now.AddSeconds(10); buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

.NETTER Code Starter Pack v1.0.beta Released

- by Mohammad Ashraful Alam

.NETTER Code Starter Pack contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies released by Microsoft. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database. The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic Data QuickStart (TBD) Azure Service Platform Windows Azure Hello World Windows Azure Storage Simple CRUD Database Scripts Entity Framework 4.0 (TBD) SharePoint 2010 Visual Web Part Linq QuickStart Silverlight Business App Hello World WCF RIA Services QuickStart Utility Framework MEF Moq QuickStart T-4 QuickStart Unity QuickStart WCF WCF Data Services QuickStart WCF Hello World WorkFlow Foundation Web API Facebook Toolkit QuickStart Download link: http://codebox.codeplex.com/releases/view/57382 Technorati Tags: release,new release,asp.net,mef,unity,sharepoint,wcf

Read the article

Tricks and Optimizations for you Sitecore website

- by amaniar

When working with Sitecore there are some optimizations/configurations I usually repeat in order to make my app production ready. Following is a small list I have compiled from experience, Sitecore documentation, communicating with Sitecore Engineers etc. This is not supposed to be technically complete and might not be fit for all environments. Simple configurations that can make a difference: 1) Configure Sitecore Caches. This is the most straight forward and sure way of increasing the performance of your website. Data and item cache sizes (/databases/database/ [id=web] ) should be configured as needed. You may start with a smaller number and tune them as needed. <cacheSizes hint="setting"> <data>300MB</data> <items>300MB</items> <paths>5MB</paths> <standardValues>5MB</standardValues> </cacheSizes> Tune the html, registry etc cache sizes for your website. <cacheSizes> <sites> <website> <html>300MB</html> <registry>1MB</registry> <viewState>10MB</viewState> <xsl>5MB</xsl> </website> </sites> </cacheSizes> Tune the prefetch cache settings under the App_Config/Prefetch/ folder. Sample /App_Config/Prefetch/Web.Config: <configuration> <cacheSize>300MB</cacheSize>  <template desc="mytemplate">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</template>  <item desc="myitem">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }</item>  <children desc="childitems">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</children> </configuration> Break your page into sublayouts so you may cache most of them. Read the caching configuration reference: http://sdn.sitecore.net/upload/sitecore6/sc62keywords/cache_configuration_reference_a4.pdf 2) Disable Analytics for the Shell Site <site name="shell" virtualFolder="/sitecore/shell" physicalFolder="/sitecore/shell" rootPath="/sitecore/content" startItem="/home" language="en" database="core" domain="sitecore" loginPage="/sitecore/login" content="master" contentStartItem="/Home" enableWorkflow="true" enableAnalytics="false" xmlControlPage="/sitecore/shell/default.aspx" browserTitle="Sitecore" htmlCacheSize="2MB" registryCacheSize="3MB" viewStateCacheSize="200KB" xslCacheSize="5MB" /> 3) Increase the Check Interval for the MemoryMonitorHook so it doesn’t run every 5 seconds (default). <hook type="Sitecore.Diagnostics.MemoryMonitorHook, Sitecore.Kernel"> <param desc="Threshold">800MB</param> <param desc="Check interval">00:05:00</param> <param desc="Minimum time between log entries">00:01:00</param> <ClearCaches>false</ClearCaches> <GarbageCollect>false</GarbageCollect> <AdjustLoadFactor>false</AdjustLoadFactor> </hook> 4) Set Analytics.PeformLookup (Sitecore.Analytics.config) to false if your environment doesn’t have access to the internet or you don’t intend to use reverse DNS lookup. <setting name="Analytics.PerformLookup" value="false" /> 5) Set the value of the “Media.MediaLinkPrefix” setting to “-/media”: <setting name="Media.MediaLinkPrefix" value="-/media" /> Add the following line to the customHandlers section: <customHandlers> <handler trigger="-/media/" handler="sitecore_media.ashx" /> <handler trigger="~/media/" handler="sitecore_media.ashx" /> <handler trigger="~/api/" handler="sitecore_api.ashx" /> <handler trigger="~/xaml/" handler="sitecore_xaml.ashx" /> <handler trigger="~/icon/" handler="sitecore_icon.ashx" /> <handler trigger="~/feed/" handler="sitecore_feed.ashx" /> </customHandlers> Link: http://squad.jpkeisala.com/2011/10/sitecore-media-library-performance-optimization-checklist/ 6) Performance counters should be disabled in production if not being monitored <setting name="Counters.Enabled" value="false" /> 7) Disable Item/Memory/Timing threshold warnings. Due to the nature of this component, it brings no value in production.  <!--<processor type="Sitecore.Pipelines.HttpRequest.StopMeasurements, Sitecore.Kernel"> <TimingThreshold desc="Milliseconds">1000</TimingThreshold> <ItemThreshold desc="Item count">1000</ItemThreshold> <MemoryThreshold desc="KB">10000</MemoryThreshold> </processor>—> 8) The ContentEditor.RenderCollapsedSections setting is a hidden setting in the web.config file, which by default is true. Setting it to false will improve client performance for authoring environments. <setting name="ContentEditor.RenderCollapsedSections" value="false" /> 9) Add a machineKey section to your Web.Config file when using a web farm. Link: http://msdn.microsoft.com/en-us/library/ff649308.aspx 10) If you get errors in the log files similar to: WARN Could not create an instance of the counter 'XXX.XXX' (category: 'Sitecore.System') Exception: System.UnauthorizedAccessException Message: Access to the registry key 'Global' is denied. Make sure the ApplicationPool user is a member of the system “Performance Monitor Users” group on the server. 11) Disable WebDAV configurations on the CD Server if not being used. More: http://sitecoreblog.alexshyba.com/2011/04/disable-webdav-in-sitecore.html 12) Change Log4Net settings to only log Errors on content delivery environments to avoid unnecessary logging. <root> <priority value="ERROR" /> <appender-ref ref="LogFileAppender" /> </root> 13) Disable Analytics for any content item that doesn’t add value. For example a page that redirects to another page. 14) When using Web User Controls avoid registering them on the page the asp.net way: <%@ Register Src="~/layouts/UserControls/MyControl.ascx" TagName="MyControl" TagPrefix="uc2" %> Use Sublayout web control instead – This way Sitecore caching could be leveraged <sc:Sublayout ID="ID" Path="/layouts/UserControls/MyControl.ascx" Cacheable="true" runat="server" /> 15) Avoid querying for all children recursively when all items are direct children. Sitecore.Context.Database.SelectItems("/sitecore/content/Home//*"); //Use: Sitecore.Context.Database.GetItem("/sitecore/content/Home"); 16) On IIS — you enable static & dynamic content compression on CM and CD More: http://technet.microsoft.com/en-us/library/cc754668%28WS.10%29.aspx 17) Enable HTTP Keep-alive and content expiration in IIS. 18) Use GUID’s when accessing items and fields instead of names or paths. Its faster and wont break your code when things get moved or renamed. Context.Database.GetItem("{324DFD16-BD4F-4853-8FF1-D663F6422DFF}") Context.Item.Fields["{89D38A8F-394E-45B0-826B-1A826CF4046D}"]; //is better than Context.Database.GetItem("/Home/MyItem") Context.Item.Fields["FieldName"] Hope this helps.

Read the article

Silverlight Cream for March 10, 2010 - 2 -- #811

- by Dave Campbell

In this Issue: AfricanGeek, Phil Middlemiss, Damon Payne, David Anson, Jesse Liberty, Jeremy Likness, Jobi Joy(-2-), Fredrik Normén, Bobby Diaz, and Mike Taulty(-2-). Shoutouts: Shawn Wildermuth blogged that they posted My "What's New in Silverlight 3" Video from 0reDev Last Fall Shawn Wildermuth also has a post up for his loyal followers: Where to See Me At MIX10 Jonas Follesø has presentation materials up as well: MVVM presentation from NDC2009 on Vimeo Adam Kinney updated his Favorite Tool and Library Downloads for Silverlight From SilverlightCream.com: Styling Silverlight ListBox with Blend 3 In his latest Video Tutorial, AfricanGeek is animating the ListBox control by way of Expression Blend 3. Animating the Silverlight Opacity Mask Phil Middlemiss has written a Behavior that lets you turn a FrameworkElement into an opacity mask for it's parent container... check out his tutorial and grab the code. AddRange for ObservableCollection in Silverlight 3 Damon Payne has a post up discussing the problem with large amounts of data in an ObservableCollection, and how using AddRange is a performance booster. Easily rotate the axis labels of a Silverlight/WPF Toolkit chart David Anson blogged a solution to rotating the axis labels of a Silverlight and WPF chart. Persisting the Configuration (Updated) Jesse Liberty has a good discussion on the continuation of his HyperVideo Platform talking about what all he is needing from the database in the form of configuration information... including the relationships. Animations and View Models: IAnimationDelegate Check out Jeremy Likness' IAnimationDelegate that lets your ViewModel fire and respond to animations without having to know all about them. Button Style - Silverlight Jobi Joy converted a WPF control template into Silverlight... and you'll want to download the XAML he's got for this :) A Simple Accordion banner using ListBox Jobi Joy also has an Image Accordian created in Expression Blend... and it's a 'drop this XAML in your User Control' kinda thing... again, go grab the XAML :) WCF RIA Services Silverlight Business Application – Using ASP.NET SiteMap for Navigation Fredrik Normén has a code-laden post up on RIA Services and the ASP.NET SiteMap. He is using the Silverlight Business app template that comes with WCF RIA Services. A Simple, Selectable Silverlight TextBlock (sort of)... Bobby Diaz shares with us his solution for a Text control that can be copied from in the same manner 'normal' web controls can be. He also includes a link to another post on the same topic. Silverlight 4 Beta Networking. Part 11 - WCF and TCP Mike Taulty has another pair of video tutorials up in his Networking series. This one is on WCF over TCP Silverlight 4 Beta Networking. Part 12 - WCF and Polling HTTP Mike Taulty's 12th networking video tutorial is on WCF with HTTP polling duplex. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 MIX10

Read the article

The Best Ways to Lock Down Your Multi-User Computer

- by Lori Kaufman

Whether you’re sharing a computer with other family members or friends at home, or securing computers in a corporate environment, there may be many reasons why you need to protect the programs, data, and settings on the computers. This article presents multiple ways of locking down a Windows 7 computer, depending on the type of usage being employed by the users. You may need to use a combination of several of the following methods to protect your programs, data, and settings. How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

Read the article

Silverlight Cream for April 04, 2010 -- #830

- by Dave Campbell

In this Issue: Michael Washington, Hassan, David Anson, Jeff Wilcox, UK Application Development Consulting, Davide Zordan, Victor Gaudioso, Anoop Madhusudanan, Phil Middlemiss, and Laurent Bugnion. Shoutouts: Josh Smith has a good-read post up: Design-time data is still data Shawn Hargreaves reported his MIX demo released From SilverlightCream.com: Silverlight MVVM: Enabling Design-Time Data in Expression Blend When Using Web Services Michael Washington has a tutorial up on MVVM and using a web service to get design-time data that works in Blend also... lots of information and screenshots. WP7 Transition Animation Hassan has a new WP7 tutorial up that demonstrates playing media and adding transition animation between pages. Tip: For a truly read-only custom DependencyProperty in Silverlight, use a read-only CLR property instead David Anson's latest tip is in response to comments on his previous post and details one by Dr. WPF who points out that a read-only DependencyProperty doesn't actually need to be a DependencyProperty as long as the class implements INotifyPropertyChanged. Template parts and custom controls (quick tip) Jeff Wilcox has posted a set of tips and recommendations to use when developing control development in Silverlight ... this is a post to bookmark. Flexible Data Template Support in Silverlight The UK Application Development Consulting details a 'problem' in Silverlight that doesn't exist in WPF and that is data templates that vary by type... and discusses a way around it. Multi-Touch enabling Silverlight Simon using Blend behaviors and the Surface sample for Silverlight Davide Zordan brought Multi-Touch to the Silverlight Simon game on CodePlex using Blend Behaviors. New Video Tutorial: How to Use a Behavior to Fire Methods from Objects in Styles Victor Gaudioso has a video tutorial up responding to a question from a developer. He demonstrates development of a Behavior that can be attached to objects in or out of Styles that allows you to specify what Method they need to fire. Creating a Silverlight Client for @shanselman ’s Nerd Dinner, using oData and Bing Maps Anoop Madhusudanan took Scott Hanselman's post on an OData API for StackOverflow, and has created a Silverlight client for Nerd Dinner, including BingMaps. A Chrome and Glass Theme - Part 2 Phil Middlemiss has the next part of his Chrome and Glass Theme up. In this one he creates a very nice chrome-look button with visual state changes. MVVM Light Toolkit V3 SP1 for Windows Phone 7 Laurent Bugnion has released a new version of MVVM Light for WP7. Included is an installation manual and information about what was changed. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Mocking the Unmockable: Using Microsoft Moles with Gallio

- by Thomas Weller

Usual opensource mocking frameworks (like e.g. Moq or Rhino.Mocks) can mock only interfaces and virtual methods. In contrary to that, Microsoft’s Moles framework can ‘mock’ virtually anything, in that it uses runtime instrumentation to inject callbacks in the method MSIL bodies of the moled methods. Therefore, it is possible to detour any .NET method, including non-virtual/static methods in sealed types. This can be extremely helpful when dealing e.g. with code that calls into the .NET framework, some third-party or legacy stuff etc… Some useful collected resources (links to website, documentation material and some videos) can be found in my toolbox on Delicious under this link: http://delicious.com/thomasweller/toolbox+moles A Gallio extension for Moles Originally, Moles is a part of Microsoft’s Pex framework and thus integrates best with Visual Studio Unit Tests (MSTest). However, the Moles sample download contains some additional assemblies to also support other unit test frameworks. They provide a Moled attribute to ease the usage of mole types with the respective framework (there are extensions for NUnit, xUnit.net and MbUnit v2 included with the samples). As there is no such extension for the Gallio platform, I did the few required lines myself – the resulting Gallio.Moles.dll is included with the sample download. With this little assembly in place, it is possible to use Moles with Gallio like that: [Test, Moled] public void SomeTest() { ... What you can do with it Moles can be very helpful, if you need to ‘mock’ something other than a virtual or interface-implementing method. This might be the case when dealing with some third-party component, legacy code, or if you want to ‘mock’ the .NET framework itself. Generally, you need to announce each moled type that you want to use in a test with the MoledType attribute on assembly level. For example: [assembly: MoledType(typeof(System.IO.File))] Below are some typical use cases for Moles. For a more detailed overview (incl. naming conventions and an instruction on how to create the required moles assemblies), please refer to the reference material above. Detouring the .NET framework Imagine that you want to test a method similar to the one below, which internally calls some framework method: public void ReadFileContent(string fileName) { this.FileContent = System.IO.File.ReadAllText(fileName); } Using a mole, you would replace the call to the File.ReadAllText(string) method with a runtime delegate like so: [Test, Moled] [Description("This 'mocks' the System.IO.File class with a custom delegate.")] public void ReadFileContentWithMoles() { // arrange ('mock' the FileSystem with a delegate) System.IO.Moles.MFile.ReadAllTextString = (fname => fname == FileName ? FileContent : "WrongFileName"); // act var testTarget = new TestTarget.TestTarget(); testTarget.ReadFileContent(FileName); // assert Assert.AreEqual(FileContent, testTarget.FileContent); } Detouring static methods and/or classes A static method like the below… public static string StaticMethod(int x, int y) { return string.Format("{0}{1}", x, y); } … can be ‘mocked’ with the following: [Test, Moled] public void StaticMethodWithMoles() { MStaticClass.StaticMethodInt32Int32 = ((x, y) => "uups"); var result = StaticClass.StaticMethod(1, 2); Assert.AreEqual("uups", result); } Detouring constructors You can do this delegate thing even with a class’ constructor. The syntax for this is not all too intuitive, because you have to setup the internal state of the mole, but generally it works like a charm. For example, to replace this c’tor… public class ClassWithCtor { public int Value { get; private set; } public ClassWithCtor(int someValue) { this.Value = someValue; } } … you would do the following: [Test, Moled] public void ConstructorTestWithMoles() { MClassWithCtor.ConstructorInt32 = ((@class, @value) => new MClassWithCtor(@class) {ValueGet = () => 99}); var classWithCtor = new ClassWithCtor(3); Assert.AreEqual(99, classWithCtor.Value); } Detouring abstract base classes You can also use this approach to ‘mock’ abstract base classes of a class that you call in your test. Assumed that you have something like that: public abstract class AbstractBaseClass { public virtual string SaySomething() { return "Hello from base."; } } public class ChildClass : AbstractBaseClass { public override string SaySomething() { return string.Format( "Hello from child. Base says: '{0}'", base.SaySomething()); } } Then you would set up the child’s underlying base class like this: [Test, Moled] public void AbstractBaseClassTestWithMoles() { ChildClass child = new ChildClass(); new MAbstractBaseClass(child) { SaySomething = () => "Leave me alone!" } .InstanceBehavior = MoleBehaviors.Fallthrough; var hello = child.SaySomething(); Assert.AreEqual("Hello from child. Base says: 'Leave me alone!'", hello); } Setting the moles behavior to a value of MoleBehaviors.Fallthrough causes the ‘original’ method to be called if a respective delegate is not provided explicitly – here it causes the ChildClass’ override of the SaySomething() method to be called. There are some more possible scenarios, where the Moles framework could be of much help (e.g. it’s also possible to detour interface implementations like IEnumerable<T> and such…). One other possibility that comes to my mind (because I’m currently dealing with that), is to replace calls from repository classes to the ADO.NET Entity Framework O/R mapper with delegates to isolate the repository classes from the underlying database, which otherwise would not be possible… Usage Since Moles relies on runtime instrumentation, mole types must be run under the Pex profiler. This only works from inside Visual Studio if you write your tests with MSTest (Visual Studio Unit Test). While other unit test frameworks generally can be used with Moles, they require the respective tests to be run via command line, executed through the moles.runner.exe tool. A typical test execution would be similar to this: moles.runner.exe <mytests.dll> /runner:<myframework.console.exe> /args:/<myargs> So, the moled test can be run through tools like NCover or a scripting tool like MSBuild (which makes them easy to run in a Continuous Integration environment), but they are somewhat unhandy to run in the usual TDD workflow (which I described in some detail here). To make this a bit more fluent, I wrote a ReSharper live template to generate the respective command line for the test (it is also included in the sample download – moled_cmd.xml). - This is just a quick-and-dirty ‘solution’. Maybe it makes sense to write an extra Gallio adapter plugin (similar to the many others that are already provided) and include it with the Gallio download package, if there’s sufficient demand for it. As of now, the only way to run tests with the Moles framework from within Visual Studio is by using them with MSTest. From the command line, anything with a managed console runner can be used (provided that the appropriate extension is in place)… A typical Gallio/Moles command line (as generated by the mentioned R#-template) looks like that: "%ProgramFiles%\Microsoft Moles\bin\moles.runner.exe" /runner:"%ProgramFiles%\Gallio\bin\Gallio.Echo.exe" "Gallio.Moles.Demo.dll" /args:/r:IsolatedAppDomain /args:/filter:"ExactType:TestFixture and Member:ReadFileContentWithMoles" -- Note: When using the command line with Echo (Gallio’s console runner), be sure to always include the IsolatedAppDomain option, otherwise the tests won’t use the instrumentation callbacks! -- License issues As I already said, the free mocking frameworks can mock only interfaces and virtual methods. if you want to mock other things, you need the Typemock Isolator tool for that, which comes with license costs (Although these ‘costs’ are ridiculously low compared to the value that such a tool can bring to a software project, spending money often is a considerable gateway hurdle in real life...). The Moles framework also is not totally free, but comes with the same license conditions as the (closely related) Pex framework: It is free for academic/non-commercial use only, to use it in a ‘real’ software project requires an MSDN Subscription (from VS2010pro on). The demo solution The sample solution (VS 2008) can be downloaded from here. It contains the Gallio.Moles.dll which provides the here described Moled attribute, the above mentioned R#-template (moled_cmd.xml) and a test fixture containing the above described use case scenarios. To run it, you need the Gallio framework (download) and Microsoft Moles (download) being installed in the default locations. Happy testing…

Search Results

Search found 8279 results on 332 pages for 'template toolkit'.

Page 143/332 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >

- by Joshua Miller

- by Bobby Diaz

- by Jon Galloway

- by ScottGu

- by Matthew Guay

- by Asian Angel

- by Tim Murphy

- by ScottGu

- by jsavit

- by Stefan Hinker

- by Jason Fitzpatrick

- by Dave Campbell

- by nmgomes

- by hajan

- by svdoever

- by Steve Michelotti

- by bconlon

- by Mohammad Ashraful Alam

- by amaniar

- by Dave Campbell

- by Lori Kaufman

- by Dave Campbell

- by Thomas Weller

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >