Search Results

Search found 20941 results on 838 pages for 'hard drive recovery'.

Page 144/838 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Anyway I can trick Carbonite into backing up an external hard drive?

  - by Brian

  I use carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 gig) so I went out and purchased an external hard drive. However, Carbonite will not back it up. I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• "Can't find root filesystem / error mounting /dev/root" when booting to new kernel

  - by salparadise

  I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

  Read the article

• Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

  - by Janar

  I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

  Read the article

• DVD drive not recognized

  - by David Oneill

  I'm in the midst of building a computer (first time builder) I got everything plugged in, and hit the power button. After the excitement of the first boot coming up on my screen, I was looking through the BIOS settings. However, joy soon turned sour, as I looked at the list of installed SATA devices. My DVD drive wasn't on the list :( So, what are common things I should check/try?

  Read the article

• How can I recover an ext4 filesystem corrupted after a fsck?

  - by Regan

  I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

  Read the article

• Cancelled a format using diskpart at 0%. Can I get the data back?

  - by Sudarshan

  I wanted to format my USB thumbdrive, but incorrectly did the following on my external HDD!! CMD -- Diskpart select disk 2 clean create partition primary select partition 1 active format fs=fat32 While it was still at 0% however, I cancelled the format and quit from CMD. I can no longer see the HDD in My computer though, and it shows up as below in diskpart Disk 1 Status - Online Size- 1800 GB Free - 0B Is there anything I can do to get the data and HDD back?

  Read the article

• How long do uploaded files stay in the tmp folder in Linux Ubuntu?

  - by Jean-Nicolas Boulay Desjardins

  I am building a web application where my users will be able to upload files. After the files are uploaded I need to send the files to two other servers, and after they will be deleted from the server where they were just uploaded to. I am wandering is it a good I idea to keep the uploaded files in the tmp/ folder the time the uploaded files are sent to the other two servers or should I move them to another folder incase they get deleted? I am also wandering because I would like to know if I have to build a cron script to get rid of the files that have been transfered to the other servers so that I get my disk space back.

  Read the article

• Suggestions for Backup solution

  - by jiewmeng

  i am considering between windows home server simple nas extra HDD's in desktop btw, i will be the main user i am looking to fulfil the following needs: reliability (i am think RAID 1 or 5) not so prone to virus/malware infections (will using a separate NAS or home server help? say windows home server is still a windows pc except separated by network?) power efficiency (eg. spin down when not in use) download (eg. i may want to dl big files/torrents overnight and i may not want to use a full powered PC for it? does a full pc vs NAS provide significant power usage to justify cost of new system esp. since i am only user?) performance (i guess i like to write/access my files fast, on 2nd thought, maybe for backup i can forgo this? maybe for a WD Green HDD? but how much slower will it be? plus since i am the only user, i think the whole HDD will be mine?)

  Read the article

• can I consolidate a multi-disk zfs zpool to a single (larger) disk?

  - by rmeden

  I have this zpool: bash-3.2# zpool status dpool pool: dpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM dpool ONLINE 0 0 0 c3t600601604F021A009E1F867A3E24E211d0 ONLINE 0 0 0 c3t600601604F021A00141D843A3F24E211d0 ONLINE 0 0 0 I would like to replace both of these disks with a single (larger disk). Can it be done? zpool attach allows me to replace one physical disk, but it won't allow me to replace both at once.

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• Best way to reformat/recover with a one-use CD key for Windows?

  - by CSarnia

  I have a copy of Windows 7 Professional that I have downloaded from the MSDN e-academy (thanks to my school). Now, the problem is that these license keys are one-use only. If I need to reformat or do a factory reset, what is the best way for me to do so, without invalidating my license and screwing me out of an operating system?

  Read the article

• Error when mount the database in exchange 2010 SP1

  - by user64060

  Hi, My company have two exchange 2010 SP1 servers with DAG configuration with OS widows server 2008 R2 in testing entironment. Today i want to test my backup possibility, so i restore the backup data to another location not original location. I dismount the database and then delete the all files under the database location. last I copy back the files from back up location to database location. When i want to mount the database. It will come out the below error! -------------------------------------------------------- Microsoft Exchange Error -------------------------------------------------------- Failed to mount database 'mail2'. mail2FailedError: Couldn't mount the database that you specified. Specified database: mail2; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn]. An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn] An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Server: mail2.e0594.cn] MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) Any suggestion? Thanks!

  Read the article

• How should I interpret the specifications of a SSD?

  - by paulgreg

  When considering to buy a SSD, how should I interpret the different specifications of the SSD? Here are some specific things that need to be deciphered: Controller (this can affect performance and endurance more than all other factors combined) Bus Technology Form Factor (Physical Size) Capacity NAND or NOR technology Power Consumption during Read, during Write, when Idle Read/Write Burst and Sustained Throughput All of these things I would like to be explained in more detail and their actual importance in selecting an SSD.

  Read the article

• recover deleted files from other computer

  - by Giorgi

  Hello, I moved a html file from my computer to another and accidentally deleted it from that computer which I accessed from my computer like this: \name\folder As a result the file did not go recycle bin. I tried ntfsundelete and it did found the file on my computer but when I recovered, it looks like as if you opened binary file with notepad. I then tried Recuva and it says that part of the file is overwritten. Is there any chance to recover it? Can I recover it from another computer? Thanks.

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• Huge HDD response time in Resource monitor

  - by Mille

  Just bought all parts for a computer and put it together and installed a fresh version of windows 7. After a while, when using the computer it gets very slow, and even closing down windows can take several minutes. I started to look in the resource monitor and though I found the answer watching my hdd. The thing is that the hdd completes all tests in Seagate's SeaTools for Windows successfully. Which makes me doubt on the problem and weather I can send it in to get an replacement. Suggestions on what it could be and what I can do about it? Here a screenshoot from the resource monitor:

  Read the article

• How to recover ~1TB data from a bricked NAS?

  - by alastairs

  I bought an IcyBox NAS a little while back, and it recently died on me. I have physical access to the disks inside (1.5TB RAID 1 array), and the box was running a version of Linux. I now have the difficulty of retrieving the data from the disks. All I have available are 2 Windows machines, one of which has sufficient free space to hold the data from the NAS. What would be the quickest and easiest way to retrieve the data from the disks?

  Read the article

• dd on entire disk, but do not want empty portion

  - by Jonathan Henson

  I have a disk, say /dev/sda. Here is fdisk -l: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0000e4b5 Device Boot Start End Blocks Id System /dev/sda1 * 1 27 209920 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 27 525 4000768 5 Extended Partition 2 does not end on cylinder boundary. /dev/sda5 27 353 2621440 83 Linux /dev/sda6 353 405 416768 83 Linux /dev/sda7 405 490 675840 83 Linux /dev/sda8 490 525 282624 83 Linux I need to make an image to store on our file server for use in flashing other devices we are manufacturing so I only want the used space (only about 4gb). I want to keep the mbr etc... as this device should be boot ready as soon as the copy is finished. Any ideas? I previously had been using dd if=/dev/sda of=[//fileserver/file], but at that time, my master copy was on a 4gb flash ide.

  Read the article

• Firefox: getting access to the list of tabs/windows to restore on startup

  - by robb

  Sometimes Firefox fails to restore the previously open tabs/windows. This might be happening when some of the URLs to be opened are no longer reachable (e.g. behind a VPN) or after the underlying OS (Windows) has been forcibly restarted (e.g. to complete an automated patch installation). Anyway, after restarting, can this list of URLs be recovered somehow? Say for example, I was daft enough to have clicked on "start new session". Can I still get access to the old list of open URLs? There is the browser history of course, but it contains a lot of stuff - the URLs that were open when Firefox last exited are not obvious. It would be neat if they were marked in some way - tagged for example.

  Read the article

• Mini-ITX Case that would take ~6 SATA Hard Drives

  - by Kyle Brandt

  Thinking about maybe building my own NAS. I would go with Raid 5, and would like maybe about 6 SATA drives: There a mini atx case that can hold this many drives (Non-Rack ideally) What sort of power will I need? Any way this won't be pretty loud?

  Read the article

• How do I make a partition usable in windows 7 after power loss?

  - by user1306322

  A few days ago I was installing some software and power went down. When I rebooted, the partition to which the software was installed was not accessible. Disk manager shows that it's there, but doesn't show type, if it's healthy and gives me an error when trying to read its properties. The problem seems to be common after power loss, people recommend solving it by assigning a letter to the partition via DiskPart utility, but partition isn't listed in my case. I can access that partition with bootable OSs (like bootable Ubuntu or winXP) and all the files are there, but another installation of Windows 7 gives me the same results as the original. I could just copy all data to another disk if there was enough space, but unfortunately the size of partition I'm having problems with is 1.1TB. How do I regain access to the partition in my original Windows 7 installation without losing any data?

  Read the article

• Mounting LVM2 volume with XFS filesystem

  - by Chris

  Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

  Read the article

• How can I combine non-identical disks efficiently?

  - by Odys

  There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

  Read the article

• 4 month old 500 GB SATA HDD making noise?

  - by metal gear solid

  My 4 month old 500 GB SATA HDD making noise sometimes and the PC hangs when it makes noise when the noise stops desktop work fine. It doesn't happen every day but it does happen. Is something wrong with HDD, Data, power cable, or my cabinet's power supply? Should I run scandisk or defragmentation on the disk.

  Read the article

• one 16K random read I/O issues 2 scsi I/O (16K and 4K) requests in linux

  - by hiroyuki

  I noticed weird issue when benchmarking random read I/O for files in linux (2.6.18). The Benchmarking program is my own program and it simply keeps reading 16KB of a file from a random offset. I traced I/O behavior at system call level and scsi level by systemtap and I noticed that one 16KB sysread issues 2 scsi I/Os as following. SYSPREAD random(8472) 3, 0x16fc5200, 16384, 128137183232 SCSI random(8472) 0 1 0 0 start-sector: 226321183 size: 4096 bufflen 4096 FROM_DEVICE 1354354008068009 SCSI random(8472) 0 1 0 0 start-sector: 226323431 size: 16384 bufflen 16384 FROM_DEVICE 1354354008075927 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 21807710208 SCSI random(8472) 0 1 0 0 start-sector: 1889888935 size: 4096 bufflen 4096 FROM_DEVICE 1354354008085128 SCSI random(8472) 0 1 0 0 start-sector: 1889891823 size: 16384 bufflen 16384 FROM_DEVICE 1354354008097161 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 139365318656 SCSI random(8472) 0 1 0 0 start-sector: 254092663 size: 4096 bufflen 4096 FROM_DEVICE 1354354008100633 SCSI random(8472) 0 1 0 0 start-sector: 254094879 size: 16384 bufflen 16384 FROM_DEVICE 1354354008111723 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 60304424960 SCSI random(8472) 0 1 0 0 start-sector: 58119807 size: 4096 bufflen 4096 FROM_DEVICE 1354354008120469 SCSI random(8472) 0 1 0 0 start-sector: 58125415 size: 16384 bufflen 16384 FROM_DEVICE 1354354008126343 As shown above, one 16KB pread issues 2 scsi I/Os. (I traced scsi io dispatching with probe scsi.iodispatching. Please ignore values except for start-sector and size.) One scsi I/O is 16KB I/O as requested from the application and it's OK. The thing is the other 4KB I/O which I don't know why linux issues that I/O. of course, I/O performance is degraded by the weired 4KB I/O and I am having trouble. I also use fio (famous I/O benchmark tool) and noticed the same issue, so it's not from the application. Does anybody know what is going on ? Any comments or advices are appreciated. Thanks

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >