Search Results

Search found 17971 results on 719 pages for 'log analyzer'.

Page 144/719 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

  • Sending cron output to a file with a timestamp in its name

    - by Philip Morton
    I have a crontab like this on a LAMP setup: 0 0 * * * /some/path/to/a/file.php > $HOME/cron.log 2>&1 This writes the output of the file to cron.log. However, when it runs again, it overwrites whatever was previously in the file. How can I get cron to output to a file with a timestamp in its filename? An example filename would be something like this: 2010-02-26-000000-cron.log I don't really care about the format, as long as it has a timestamp of some kind. Thanks in advance.

    Read the article

  • Get Kerberos ticket with SSH

    - by Joel
    I'd like to get a Kerberos 5 ticket when ssh-ing to get to a fully-automated login solution. Typically, you use kinit first and then ssh: > kinit user@DOMAIN user@DOMAIN's Password: (enter password) > ssh user@host (successful login) I'd like to simply run ssh user@host and automatically check for a Kerberos ticket. If one isn't there, I'd like it to get a ticket and then log in. > kdestroy > ssh user@host user@DOMAIN's Password: (enter password) (successful login) (log off of host) > klist (show ticket info) I'd like this to be configured on a per-host basis, as not every host I log into supports Kerberos.

    Read the article

  • Can't login to just installed view administrator

    - by matarvai81
    Hi, we are starting to test View for our purposes. I have created new test enviroment, new vdidemo active directory, new virtual center etc... I just installed view connection server component to new server and trying to do initial configuration, but when trying to log in I get following error " Error accessing the View Administrator. Contact the system administrator" Log file says following error 08:14:08,925 INFO LoginBean User administrator has failed to authenticate to View Administrator What is causing this problem? How can I log in and start to test VDI?

    Read the article

  • pip install fails on guest Linux Mint 15

    - by synergetic
    On my Windows 7 PC, I installed VMware VM for Linux Mint 15. Windows PC is behind corporate firewall /proxy server. Now inside Linux I issued: sudo apt-get install python-virtualenv Then created ~/projects folder and python virtual environment: mkdir projects cd projects virtualenv venv Then activated my virtual env: . venv/bin/activate So far no problem. Then tried to install python libraries, for example markupsafe: pip install markupsafe It throws an error: Cannot fetch index base URL https://pypi.python.org/simple/ Could not find any downloads that satisfy the requirement markupsafe No distributions at all found for markupsafe Storing complete log in /home/me/.pip/pip.log Inside pip.log I found: <urlopen error [Errno 104] Connection reset by peer> Installing any other library throws similar error. What's wrong here?

    Read the article

  • Amazon EC2 Creating Tunnel with OpenVPN

    - by nocode
    I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

    Read the article

  • Python script won't write data when ran from cron

    - by Ruud
    When I run a python script in a terminal it runs as expected; downloads file and saves it in the desired spot. sudo python script.py I've added the python script to the root crontab, but then it runs as it is supposed to except it does not write the file. $ sudo crontab -l > * * * * * python /home/test/script.py >> /var/log/test.log 2>&1 Below is a simplified script that still has the problem: #!/usr/bin/python scheduleUrl = 'http://test.com/schedule.xml' schedule = '/var/test/schedule.xml' # Download url and save as filename def wget(url, filename): import urllib2 try: response = urllib2.urlopen(url) except Exception: import traceback logging.exception('generic exception: ' + traceback.format_exc()) else: print('writing:'+filename+';') output = open(filename,'wb') output.write(response.read()) output.close() # Download the schedule wget(scheduleUrl, schedule) I do get the message "writing:name of file;" inside the log, to which the cron entry outputs. But the actual file is nowhere to be found... The dir /var/test is chmodded to 777 and using whatever user, I am allowed to add and change files as I please.

    Read the article

  • Setting up fail2ban to ban failed phpMyAdmin login attempts

    - by Michael Robinson
    We've been using fail2ban to block failed ssh attempts. I would like to setup the same thing for phpMyAdmin as well. As phpMyAdmin doesn't log authentication attempts to a file (that I know of), I'm unsure of how best to go about this. Does a plugin / config exist that makes phpMyAdmin log authentication attempts to a file? Or is there some other place I should look for such an activity log? Ideally I will be able to find a solution that involved modifying fail2ban config only, as I have to configure fail2ban with the same options on multiple servers, and would prefer not to also modify the various phpMyAdmin installations on said servers.

    Read the article

  • How to properly deny Railo directory access through Apache

    - by Sn3akyP3t3
    I've been battle tested on this and failed to achieve my goal which is to deny all access to all directories except the Public directory and only allow access to all all other directories with specific IP addresses. To get Railo+Apache+Tomcat installed I pretty much followed this script: https://github.com/talltroym/Railo-Ubuntu-Installer-Script then verified settings with this tutorial: http://blog.nictunney.com/2012/03/railo-tomcat-and-apache-on-amazon-ec2.html From the installation script these mods are enabled: sudo a2enmod ssl sudo a2enmod proxy sudo a2enmod proxy_http sudo a2enmod rewrite sudo a2ensite default-ssl Outside of the script I copied the sites-available to sites-enabled then reloaded Apache. I have a directory created for Railo cmfl located at /var/www/Railo/ Navigating the browser to http ://Server_IP_Address/Railo forces ssl and relocates to https ://Server_IP_Address/Railo which shows off index.cfm. Not providing index.cfm and omitting https indicates that the DirectoryIndex directive and RewriteCond of Apache appears to be working for the sites-enabled VirtualHost. The problem I'm encountering is that I cannot seem to deny access to all directories except Public. My directory structure is rather simple and looks like this: Railo error Public NotPublic Sandbox These are my sites-enabled configurations: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www #Default Deny All to prevent walking backwards in file system Alias /Railo/ "/var/www/Railo/" <Directory ~ ".*/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html index.cfc RewriteEngine on RewriteCond %{SERVER_PORT} !^443$ RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] </VirtualHost> and <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www Alias /Railo/ "/var/www/Railo/" <Directory ~ "/var/www/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html #Proxy .cfm and cfc requests to Railo ProxyPassMatch ^/(.+.cf[cm])(/.*)?$ http://127.0.0.1:8888/$1 ProxyPassReverse / http://127.0.0.1:8888/ #Deny access to admin except for local clients <Location /railo-context/admin/> Order deny,allow Deny from all # Allow from <Omitted> # Allow from <Omitted> Allow from 127.0.0.1 </Location> </VirtualHost> </IfModule> The apache2.conf includes the following: # Include the virtual host configurations: Include sites-enabled/ <IfModule !mod_jk.c> LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so </IfModule> <IfModule mod_jk.c> JkMount /*.cfm ajp13 JkMount /*.cfc ajp13 JkMount /*.do ajp13 JkMount /*.jsp ajp13 JkMount /*.cfchart ajp13 JkMount /*.cfm/* ajp13 JkMount /*.cfml/* ajp13 # Flex Gateway Mappings # JkMount /flex2gateway/* ajp13 # JkMount /flashservices/gateway/* ajp13 # JkMount /messagebroker/* ajp13 JkMountCopy all JkLogFile /var/log/apache2/mod_jk.log </IfModule> I believe I understand most of this except the jk_module inclusion which I've noticed has an error that shows up in the logs that I can't sort out: [warn] No JkShmFile defined in httpd.conf. Using default /etc/apache2/logs/jk-runtime-status I've checked my Regular expression against the paths of the directories with RegexBuddy just to be sure that I wasn't correct. The problem doesn't appear to be Regex related although I may have something incorrect in the Directory directive. The Location directive seems to be working correctly for blocking out Railo admin site access.

    Read the article

  • Running a scheduled task as SYSTEM with console window open

    - by raoulsson
    I am auto creating scheduled tasks with this line within a batch windows script: schtasks /Create /RU SYSTEM /RP SYSTEM /TN startup-task-%%i /TR %SPEEDWAY_DIR%\%TARGET_DIR%%%i\%STARTUPFILE% /SC HOURLY /MO 1 /ST 17:%%i1:00 I wanted to avoid using specific user credentials and thus decided to use SYSTEM. Now, when checking in the taskmanagers process list or, even better, directly with the C:\> schtasks command itself, all is working well, the tasks are running as intended. However in this particular case I would like to have an open console window where I can see the log flying by. I know I could use C:\> tail -f thelogfile.log if I installed e.g. cygwin (on all machines) or some proprietary tools like Baretail on Windows. But since I only switch to these machines in case of trouble, I would prefer to start the scheduled task in such a way that every user immediately sees the log. Any chance? Thanks!

    Read the article

  • IIS 8 Random 503 service unavailable

    - by Ivo
    We migrated a busy website to Windows Server 2012 with IIS 8. The website randomly gives the error "503 service unavailable" after an user presses F5 the error is gone again. The website is build in ASP.NET MVC 3. The website runs on one application pool, with default settings There are around 500 to 900 concurrent users on the website during the day, and the error happens more often when there are more 650 users. The CPU and the memory use on the server is stable. There is nothing about the 503 errors in the application log, the IIS log and the event log. Does anyone has any clue what the problem can be or how we can trace the the problem?

    Read the article

  • Percona MySQL 5.5 fails to start

    - by keymone
    trying to setup new server here but keep getting this in error log: mysqld_safe Starting mysqld daemon with databases from /data/mysql/myisam [Warning] Can't create test file /data/mysql/myisam/hostname.lower-test [Warning] Can't create test file /data/mysql/myisam/hostname.lower-test [Note] Flashcache bypass: disabled [Note] Flashcache setup error is : setmntent failed /usr/sbin/mysqld: File '/var/mysql/bin/bin-log.index' not found (Errcode: 13) [ERROR] Aborting [Note] /usr/sbin/mysqld: Shutdown complete mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended everything under /data/mysql (it's ibdata and myisam folders) is owned my mysql:mysql and has proper permissions same goes for folders with bin and relay logs under /var/mysql apparmor is purged from server any ideas? PS it seems like something else apart from apparmor is affecting permissions to access mysql files after i changed data directory to more default one - /var/lib/mysql and "Can't create test file" error is gone, but "'/var/mysql/bin/bin-log.index' not found (Errcode: 13)" is still there PPS so i installed apparmor back and added all folders to mysqld's profile and errors mentioned above are now gone(or mysql doesn't even get to that point now) what i have now is this: /usr/sbin/mysqld: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory banging my head against the wall.

    Read the article

  • Running django custom management commands with supervisord

    - by mfsaint
    I'd like to use supervisord to run some commands for my Django project but I keep getting the following error: supervisor.log: 2012-05-18 17:52:15,784 INFO spawnerr: can't find command 'source' If I remove the "source" command, the log shows the same error: can't find command 'python'. supervisord.conf excerpt: [program:django] directory=/home/mf/projects/djangopj/ command=beanstalkd -l 127.0.0.1 -p 11300 command=source /home/mf/virtualenvs/env/bin/activate command=python manage.py command1 command=python manage.py command2 user=mf autostart=true autorestart=true I tried removing the directory and adding the absolute path to the commands but I kept getting the same error. I run supervisord with the following command: supervisord -c supervisord.conf -l supervisor.log

    Read the article

  • Solaris Non global Zone x server

    - by ankimal
    I am not even sure if this is possible but how can I start an X server on a non-global zone? If I run startx from within my zone. I created the xorg.conf by running /usr/X11/bin/xorgconfig root@foo:/usr/X11/bin# startx xauth: creating new authority file /root/.serverauth.20957 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: SunOS 5.11 snv_108 i86pc Current Operating System: SunOS dsol101 5.11 snv_111b i86pc Build Date: 07 May 2009 04:44:56PM Solaris ABI: 64-bit SUNWxorg-server package version: 6.9.0.5.11.11100,REV=0.2009.05.07 SUNWxorg-mesa package version: 6.9.0.5.11.11100,REV=0.2009.04.02 Before reporting problems, check http://sunsolve.sun.com/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 19:17:53 2009 (==) Using config file: "/etc/X11/xorg.conf" Fatal server error: xf86OpenConsole: Cannot open /dev/fb (No such file or directory)

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Awstats messaging non existant user causing exim4 to go nuts

    - by Chris
    I've taken over managing a server set up by someone else now uncontactable, while managing to work out most faults / changes needed this one is stumping me. Awstats is running on the machine and sending messages via exim4 to a user every time it runs an update. The user account has been deleted and so the exim4 main log files are filling up with message delivery errors, which firstly hinders meaningful log analysis for anything else and secondly uses up quite a lot of space (it grew to 22GB unattended, panic!) I've been through all the conf files in /etc/awstats and can't seem to find any mention of this user account. Google just turns up results about how to use awstats to parse exim4 log files. So the questions is where is this setting (on debian) likely to be? Cheers in advance

    Read the article

  • Install NPM Packages Automatically for Node.js on Windows Azure Web Site

    - by Shaun
    In one of my previous post I described and demonstrated how to use NPM packages in Node.js and Windows Azure Web Site (WAWS). In that post I used NPM command to install packages, and then use Git for Windows to commit my changes and sync them to WAWS git repository. Then WAWS will trigger a new deployment to host my Node.js application. Someone may notice that, a NPM package may contains many files and could be a little bit huge. For example, the “azure” package, which is the Windows Azure SDK for Node.js, is about 6MB. Another popular package “express”, which is a rich MVC framework for Node.js, is about 1MB. When I firstly push my codes to Windows Azure, all of them must be uploaded to the cloud. Is that possible to let Windows Azure download and install these packages for us? In this post, I will introduce how to make WAWS install all required packages for us when deploying.   Let’s Start with Demo Demo is most straightforward. Let’s create a new WAWS and clone it to my local disk. Drag the folder into Git for Windows so that it can help us commit and push. Please refer to this post if you are not familiar with how to use Windows Azure Web Site, Git deployment, git clone and Git for Windows. And then open a command windows and install a package in our code folder. Let’s say I want to install “express”. And then created a new Node.js file named “server.js” and pasted the code as below. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: console.log("Web application opened."); 9: app.listen(process.env.PORT); If we switch to Git for Windows right now we will find that it detected the changes we made, which includes the “server.js” and all files under “node_modules” folder. What we need to upload should only be our source code, but the huge package files also have to be uploaded as well. Now I will show you how to exclude them and let Windows Azure install the package on the cloud. First we need to add a special file named “.gitignore”. It seems cannot be done directly from the file explorer since this file only contains extension name. So we need to do it from command line. Navigate to the local repository folder and execute the command below to create an empty file named “.gitignore”. If the command windows asked for input just press Enter. 1: echo > .gitignore Now open this file and copy the content below and save. 1: node_modules Now if we switch to Git for Windows we will found that the packages under the “node_modules” were not in the change list. So now if we commit and push, the “express” packages will not be uploaded to Windows Azure. Second, let’s tell Windows Azure which packages it needs to install when deploying. Create another file named “package.json” and copy the content below into that file and save. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*" 6: } 7: } Now back to Git for Windows, commit our changes and push it to WAWS. Then let’s open the WAWS in developer portal, we will see that there’s a new deployment finished. Click the arrow right side of this deployment we can see how WAWS handle this deployment. Especially we can find WAWS executed NPM. And if we opened the log we can review what command WAWS executed to install the packages and the installation output messages. As you can see WAWS installed “express” for me from the cloud side, so that I don’t need to upload the whole bunch of the package to Azure. Open this website and we can see the result, which proved the “express” had been installed successfully.   What’s Happened Under the Hood Now let’s explain a bit on what the “.gitignore” and “package.json” mean. The “.gitignore” is an ignore configuration file for git repository. All files and folders listed in the “.gitignore” will be skipped from git push. In the example below I copied “node_modules” into this file in my local repository. This means,  do not track and upload all files under the “node_modules” folder. So by using “.gitignore” I skipped all packages from uploading to Windows Azure. “.gitignore” can contain files, folders. It can also contain the files and folders that we do NOT want to ignore. In the next section we will see how to use the un-ignore syntax to make the SQL package included. The “package.json” file is the package definition file for Node.js application. We can define the application name, version, description, author, etc. information in it in JSON format. And we can also put the dependent packages as well, to indicate which packages this Node.js application is needed. In WAWS, name and version is necessary. And when a deployment happened, WAWS will look into this file, find the dependent packages, execute the NPM command to install them one by one. So in the demo above I copied “express” into this file so that WAWS will install it for me automatically. I updated the dependencies section of the “package.json” file manually. But this can be done partially automatically. If we have a valid “package.json” in our local repository, then when we are going to install some packages we can specify “--save” parameter in “npm install” command, so that NPM will help us upgrade the dependencies part. For example, when I wanted to install “azure” package I should execute the command as below. Note that I added “--save” with the command. 1: npm install azure --save Once it finished my “package.json” will be updated automatically. Each dependent packages will be presented here. The JSON key is the package name while the value is the version range. Below is a brief list of the version range format. For more information about the “package.json” please refer here. Format Description Example version Must match the version exactly. "azure": "0.6.7" >=version Must be equal or great than the version. "azure": ">0.6.0" 1.2.x The version number must start with the supplied digits, but any digit may be used in place of the x. "azure": "0.6.x" ~version The version must be at least as high as the range, and it must be less than the next major revision above the range. "azure": "~0.6.7" * Matches any version. "azure": "*" And WAWS will install the proper version of the packages based on what you defined here. The process of WAWS git deployment and NPM installation would be like this.   But Some Packages… As we know, when we specified the dependencies in “package.json” WAWS will download and install them on the cloud. For most of packages it works very well. But there are some special packages may not work. This means, if the package installation needs some special environment restraints it might be failed. For example, the SQL Server Driver for Node.js package needs “node-gyp”, Python and C++ 2010 installed on the target machine during the NPM installation. If we just put the “msnodesql” in “package.json” file and push it to WAWS, the deployment will be failed since there’s no “node-gyp”, Python and C++ 2010 in the WAWS virtual machine. For example, the “server.js” file. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7:  8: var sql = require("msnodesql"); 9: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:tqy4c0isfr.database.windows.net,1433;Database=msteched2012;Uid=shaunxu@tqy4c0isfr;Pwd=P@ssw0rd123;Encrypt=yes;Connection Timeout=30;"; 10: app.get("/sql", function (req, res) { 11: sql.open(connectionString, function (err, conn) { 12: if (err) { 13: console.log(err); 14: res.send(500, "Cannot open connection."); 15: } 16: else { 17: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 18: if (err) { 19: console.log(err); 20: res.send(500, "Cannot retrieve records."); 21: } 22: else { 23: res.json(results); 24: } 25: }); 26: } 27: }); 28: }); 29: 30: console.log("Web application opened."); 31: app.listen(process.env.PORT); The “package.json” file. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*", 6: "msnodesql": "*" 7: } 8: } And it failed to deploy to WAWS. From the NPM log we can see it’s because “msnodesql” cannot be installed on WAWS. The solution is, in “.gitignore” file we should ignore all packages except the “msnodesql”, and upload the package by ourselves. This can be done by use the content as below. We firstly un-ignored the “node_modules” folder. And then we ignored all sub folders but need git to check each sub folders. And then we un-ignore one of the sub folders named “msnodesql” which is the SQL Server Node.js Driver. 1: !node_modules/ 2:  3: node_modules/* 4: !node_modules/msnodesql For more information about the syntax of “.gitignore” please refer to this thread. Now if we go to Git for Windows we will find the “msnodesql” was included in the uncommitted set while “express” was not. I also need remove the dependency of “msnodesql” from “package.json”. Commit and push to WAWS. Now we can see the deployment successfully done. And then we can use the Windows Azure SQL Database from our Node.js application through the “msnodesql” package we uploaded.   Summary In this post I demonstrated how to leverage the deployment process of Windows Azure Web Site to install NPM packages during the publish action. With the “.gitignore” and “package.json” file we can ignore the dependent packages from our Node.js and let Windows Azure Web Site download and install them while deployed. For some special packages that cannot be installed by Windows Azure Web Site, such as “msnodesql”, we can put them into the publish payload as well. With the combination of Windows Azure Web Site, Node.js and NPM it makes even more easy and quick for us to develop and deploy our Node.js application to the cloud.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • iptables: How to read this OPT string?

    - by alex
    I have a simple INPUT rule for iptables that logs any new connections to a logfile. --log-tcp-options and --log-ip-options flags are both set and I get the appropriate OPT output. One line of my log looks something like this: Nov 29 17:00:00 IN=venet0 OUT= MAC= SRC=x.x.x.x DST=x.x.x.x LEN=64 TOS=0x00 PREC=0x00 TTL=53 ID=37898 DF PROTO=TCP SPT=57755 DPT=8888 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (0204057D010303010101080A3E521D4D0000000004020000) I would like to understand how to interpret the OPT string (bold). Is there some documentation available on what it actually means? How could I make it human-readable?

    Read the article

  • puppet master REST API returns 403 when running under passenger works when master runs from command line

    - by Anadi Misra
    I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

    Read the article

  • Apache, Django with mod_wsgi, and large request buffering

    - by Mukul
    In my setup of Apache 2.2 MPM worker and Django 1.3 with mod_wsgi 2.8, I need to support large POST request payloads. The problem is that when there are many such simultaneous requests, Apache uses up all the memory in the system and then crashes. It seems that Apache is buffering the requests completely in memory before executing the WSGI handler and passing it the request. Is there any way to control request buffering in Apache? The log shows the following error whenever the crash happens: [Wed Jun 29 18:35:27 2011] [error] cgid daemon process died, restarting Here's my virtual host's configuration: <VirtualHost *:8080> ServerName example.com ErrorLog /var/log/apache2/error.log WSGIScriptAlias / <path to django.wsgi> WSGIPassAuthorization on WSGIDaemonProcess example.com WSGIProcessGroup example.com XSendFileAllowAbove on XSendFile on </VirtualHost>

    Read the article

  • Laptop shuts down upon waking from suspend

    - by Bryan Head
    The computer enters suspend either by closing lid, choosing suspend from the top-right drop down, or hitting the power button and pressing suspend. It doesn't matter. I then attempt to wake the computer either by opening the lid (if it was closed) or hitting the power button. Again, doesn't matter. The computer will then immediately shutdown about 50% of the time. It seems to be more likely to shut down the longer it has been on suspend. I took a snapshot of /var/log/pm-suspend.log after a successfully resume and a shutdown. The only difference (outside of timestamps of course) was that a successful resume, after reporting the success of various suspend hooks, writes: Thu Jul 5 21:36:45 PDT 2012: performing suspend Thu Jul 5 21:37:10 PDT 2012: Awake. Thu Jul 5 21:37:10 PDT 2012: Running hooks for resume and then reports successful resume hooks. When it shuts down, the log ends at "performing suspend". I diffed the two files so I know this is the only difference. Thus, it looks like it's not even trying to wake up. Would love some ideas on this one. I've scoured the web but can't seem to find anyone else running into the same issue (it seems more common that the computer shuts down upon entering suspend, or only on hitting the power button to wake, and haven't seen any that are random like mine). I'll update with any requested information.

    Read the article

  • How to add timestamp to the logfilename with the apache log4j

    - by swati
    Hello Everyone, I am new to using apache logger . I have downloaded the log4j-xx and i have the following text configuration file # Set root logger level to DEBUG and its only appender to mainFormat. log4j.rootLogger = TRACE, mainFormat, FILE # mainFormat is set to be a ConsoleAppender. log4j.appender.mainFormat=org.apache.log4j.ConsoleAppender # mainFormat uses PatternLayout. log4j.appender.mainFormat.layout=org.apache.log4j.PatternLayout log4j.appender.mainFormat.layout.ConversionPattern=%d [%t] %-5p %c - %m%n #File makes a file of the output. log4j.appender.FILE=org.apache.log4j.FileAppender log4j.appender.FILE.File=log4j_HAPR001_OutputFile.log log4j.appender.FILE.layout=org.apache.log4j.PatternLayout log4j.appender.FILE.layout.ConversionPattern=%d [%t] %-5p %c - %m%n i use the above config file to create the log file. Now i wanted to add the current time stamp to the log file. Is there any way to do this. If yes can some one please give me the instructions how to do. Thanks in advance. Regards, Swati

    Read the article

  • GNU screen configuration for optimal keycode recognition

    - by intuited
    Currently GNU screen will botch up certain keystrokes, for example CTRL pressed in combination with the arrow keys, so that eg when in vim insert mode, CTRL-PGUp will Uppercase the next/current word (or something like that). I'd like for it to work pretty much transparently, so that the functionality is the same as when it's not running (with the obvious exception of CTRL-a control sequences)... is this possible? Also — and I suspect this is more or less a separate issue — I'd like for the scrollwheel to scroll back in the session log rather than cycling through the history as it does now. Doable? Or perhaps it could be set to emulate a much larger screen size that the terminal app that it's running under could keep that text in its session log. either way the goal would be to be able to use the mouse wheel and/or shift-up-arrow to scroll back in the session log.

    Read the article

  • Since a few days, Dropbox stopped syncing

    - by Fabio
    Theres a new problem with nautilus-dropbox and is the worst for a service like Dropbox: stopped syncing and their tech support don't believe their users. The problem is: start dropbox it downloads index creates folders start to download files stop downloading files or the speed is like 0.3k/seg even deleting everything doesn't work, even syncing a single folder with a few files, not even configuring a different limit speed or let all your bandwith, nothing works for me and i have found many users with the same problem. it's strange, i have two computers with ubuntu 14.04 and one with windows 7, and in one of the linux machines it works fine, but not in the other one. Both of them are x64. The answers from the tech support starts with "delete everything and reinstall" to "you may be blocking port 443", yeah, sure (and if i do that half of internet dissapears, idiot), but nothing works. Someone has some idea? i cant find any log file (at least a text log file like in /var/log) to understand what is dropbox doing and what is not working. PS: sorry for my "english", is not my language Examples: dropbox slow on ubuntu 14.04 Dropbox does not sync on ubuntu 14.04 Dropbox Status (in spanish but is the same thing) fabio@canopus:~$ dropbox status Sincronizando (Quedan 330 archivos., Faltan 9 días.) Descargando 330 archivos... (0,3 KB/s, Faltan 9 días.) 9 days for 330 files / 100Mb

    Read the article

  • Crash after plugging in the Logitech H600 wireless transmitter

    - by SneezyDinosaur
    I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

    Read the article

  • fail2ban with Cloudflare

    - by tatersalad58
    I'm using fail2ban to block web vulnerability scanners. It is working correctly when visiting the site if CloudFlare is bypassed, but a user can still access it if going through it. I have mod_cloudflare installed. Is it possible to block users with IPtables when using Cloudflare? Ubuntu Server 12.04 32-bit Access.log: 112.64.89.231 - - [29/Aug/2012:19:16:01 -0500] "GET /muieblackcat HTTP/1.1" 404 469 "-" "-" Jail.conf [apache-probe] enabled = true port = http,https filter = apache-probe logpath = /var/log/apache2/access.log action = iptables-multiport[name=apache-probe, port="http,https", protocol=tcp] maxretry = 1 bantime = 30 # Test Apache-probe.conf [Definition] failregex = ^<HOST>.*"GET \/muieblackcat HTTP\/1\.1".* ignoreregex =

    Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >