Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 145/239 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

  • Dell Poweredge 1950 with Perc 5i keeps losing raid config -> "Foreign Configuration Found"

    - by nosage
    The quick and dirty: the machine is a Dell Poweredge 1950, dual xeon quad cores, 8GB of ram, 2 2TB seagate SATAs in (supposed to be raid1) using a Perc 5i raid card. They are hot-swappable with a back-plane. I can build the raid fine and after a little while an install of server 08 r2 will blue screen and restart. When it comes up the raid controller says "Foreign Configuration Found." When I go into the raid configuration panel there is no raid listed but I can import the "foreign config", and the OS will boot up fine, until it blue screens again after a little while. The issue is OS independent. I have tried swapping raid cards, swapping the RAM module on the raid card and swapping the raid battery, all to no avail. Its almost as if there is a loose connection from the raid card to the back plane and both of disks get lost and the raid card drops the config. But it sees the disks fine when it boots back up. The raid card uses a SCSI SAS cable to connect to the back-plane so I guess the next step is to replace that, but... then I might as well replace the back-plane with a SCSI SAS to sata breakout cable, but... then I need a way to power the disks. Sorry for the wall of txt but it would be great to get some thoughts from people who worked with perc raid cards or poweredge servers with this type of issue before. Ironically I want to get this system up and running so I can work on MCITP labs. Thank you for any/all help and feel free to ask questions!

    Read the article

  • Why is windows 7 rejecting my key?

    - by acidzombie24
    I'm extremely confused. I have a genuine key and CD (I can take photos) and I am trying to install windows on my new tower. I believe this would be the 3rd PC i installed it (old, laptop now new tower). However i did change the HDD once but i doubt windows would think its a different computer bc of that. After going through phone activation it said i installed it on to many pcs..... i'm extremely confused. I'll be happy to deactivate it off my old tower if i knew how. I already grabbed all the files off of it. I tried to look up the amount of boxes i can install windows home premium on and found this http://en.wikipedia.org/wiki/Windows_7_editions What stuck out was this Maximum physical CPUs supported[40] 1 1 1 2 2 2 My new tower has 4cores (its the intel i7) but has two threads each so it sees 8. Does that have anything to do with this? But apparently ultimate supports '2'. I'm sure windows support more than 2 cpus so... what gives? Actually its physically one CPU so i guess the number of cores doesn't matter? Why is windows 7 rejecting my key?

    Read the article

  • Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

    - by Alex
    I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

    Read the article

  • IIS 8 Random 503 service unavailable

    - by Ivo
    We migrated a busy website to Windows Server 2012 with IIS 8. The website randomly gives the error "503 service unavailable" after an user presses F5 the error is gone again. The website is build in ASP.NET MVC 3. The website runs on one application pool, with default settings There are around 500 to 900 concurrent users on the website during the day, and the error happens more often when there are more 650 users. The CPU and the memory use on the server is stable. There is nothing about the 503 errors in the application log, the IIS log and the event log. Does anyone has any clue what the problem can be or how we can trace the the problem?

    Read the article

  • Is there a test to see if hardware virtualization (vmx / xvm) are presently enabled within a Linux session?

    - by Dr. Edward Morbius
    I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks.

    Read the article

  • How to tell if PAE is hurting me?

    - by James
    I have a couple of servers with 20-30 GB RAM that are running (a variant of) RHEL4. They are currently running the SMP i386 kernel, not x64, not even the hugemem kernel. This means LowMem is confined to < 1G, and thus dentry_cache and ext3_inode_cache to 100M or so each. How can I tell if this is a problem? Here's a typical vmstat report while it's compiling some Java: $ vmstat 10 procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 19493816 394740 922420 0 0 1058 2292 1491 1020 6 3 80 12 2 1 0 19519480 395244 850156 0 0 1179 1412 1329 1195 9 4 75 12 1 1 0 19557368 392616 828344 0 0 1783 1680 1498 1756 14 5 72 9 I don't like the way bi is nonzero when there is so much memory free. I imagine slabtop could point more directly to the problem but I don't really understand how to interpret its output.

    Read the article

  • System shuts down immediately after few sconds

    - by Anil
    I have a computer with following specification and was working fine after re-installing the system and refitting sink fan unit. Recently it shuts down automatically after a few seconds. I checked PSU by shorting pin no.s 13 & 14 as well as 14 & 15. It worked well means the PSU fan moves. But I never checked the voltages at different wires. I refitted the heat sink fan by applying thermal paste. but it behaved the same. Again I refitted the Heat Sink Fan, then it worked for 2 minutes and again shut down. Now it shuts down immediately after switching on. Mother board : M26GTM-3VP CPU : AMD athlon PSU : 450 watt Can anyone help?

    Read the article

  • fedora 11 server won't boot from SATA disk, won't boot from CD, BIOS configuration problems

    - by Tom
    Hi all, Yesterday our fc11 file/print server didn't boot, and had stopped on the BIOS page with a configuration problem. (with a distinct lack of foresight) I reset the BIOS settings to default without recording the message and booted the server. The server ran until it was to be booted this morning, and it was failing to mount the root partition from the SATA disk. It also failed to boot from a known good diagnostics CD. After a few more tries, it now fails part way through the Phoenix - AwardBIOS screen where it is listing the SATA/IDE devices, and it is showing garbage for the identity of one of the disks, which should actually be "none" It looks like the motherboard has gone kaput. The motherboard is an EVGA NF790i, are there any diagnostic tools that I can use to determine this? (as I would prefer to not send the motherboard back, only to discover that it is the RAM or the CPU) ps I can't get it to boot from the memTest disk, so I can't run that diagnostic. Thanks!

    Read the article

  • Is there a Windows 7 add-on that will put the PID in the title bar of a window?

    - by Chris
    Occasionally I run many instances of something, like Chrome or Visual Studio. Rarely, but often enough to bug me, one of them gets hosed and starts to consume 100% CPU. I can fire up the task manager to see which process is using 100%, but if it just says chrome.exe or devenv.exe, I don't know which window is the culprit. I'd like to know before terminating the process, so I can activate the app and shut it down cleanly. The best I've found so far is to use Process Explorer's feature where I can right click a process and say "bring to front". But I am curious as to whether there is an app that will put the PID(s) right in the title bar of the window so I can tell which window matches the process. I am using Windows 7 64-bit.

    Read the article

  • udev: waiting for uevents to be processed on my Gentoo

    - by stan31337
    During the startup I see machine executing this thing for about 30 seconds: udev: waiting for uevents to be processed Then I get a quick message which says something like: devfs: timeout (50 seconds) I can't see the whole thing because after that system starts up very fast including Xfce. What logs and configs do I need to provide for further investigation? $uname -a Linux genta 3.6.6-gentoo #1 SMP Sun Nov 11 11:02:23 NOVT 2012 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux Thank you! UPD: rc-status genta / # rc-status sysinit Runlevel: sysinit dmesg [ started ] udev [ started ] devfs [ started ] genta / # rc-status boot Runlevel: boot hwclock [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] sysctl [ started ] bootmisc [ started ] hostname [ started ] termencoding [ started ] keymaps [ started ] net.lo [ started ] swap [ started ] urandom [ started ] procfs [ started ]

    Read the article

  • How to stop a infinite running process(ztail) started by a ssh session after that session is closed

    - by Sanath Adiga
    I have a peculiar problem. My server supports multiple ssh session simultaneously, so that multiple admins can manage it simultaneously. We have a command which calls ztail to show the compressed log files and when the current ssh session is closed (without pressing ctrlc, to stop the tail command), the command should ideally stop working. But what I observed when I start a new ssh session is that the process ztail is still running in the background and consuming CPU, even though the previous session was closed. How can I determine when the session is closed, so that I can use that variable/flag to close/stop any commands initiated by that previously closed session?

    Read the article

  • Configure TV Capture card to not use external audio jack for TV audio output

    - by Adam D.
    I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

    Read the article

  • Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

    - by jonathanconway
    I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

    Read the article

  • Dedicated server not responding. Malicious?

    - by user2801881
    My Dedicated server dies for days on end. As soon as i reboot after about 20 seconds it does again. Then it will just work again and be fine for another week or so. Im convinced its malicious. Not sure what results or readings i can give you so just ask and i will do whatever is needed. netstat (top 20 connections) 7 79.142.88.250 8 120.202.249.19 8 159.226.21.62 8 188.168.38.102 8 202.114.6.37 8 222.62.207.70 9 60.191.35.42 10 112.124.46.186 10 116.228.55.184 10 181.133.218.11 10 222.90.111.146 11 183.136.146.110 12 124.127.51.135 12 92.225.24.24 13 221.176.23.242 15 119.10.115.165 16 17 218.6.224.66 21 116.228.55.217 24 114.112.194.19 top CPU usage seems to add up to about 10% Mailq is empty Thanks in advance

    Read the article

  • Computer won't power on

    - by briskmojo
    Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

    Read the article

  • Troubleshooting source of heavy resource-usage on a windows server 2008 running multiple sites

    - by batman_man
    Hi, I am running about 10 asp.net websites on a hosted virtual server. The server runs Server 2008 - each website is backed by its own database running on SQL server 2008 on the same box. Lately the box has seemed really slow. The only kind of discovery i could think of doing was looking in the task manager, where i can see w3wp and sqlserver.exe jumping to 40% cpu usage every 5-10 seconds. What are the steps i can take to determine which of my websites is taking these resources and or what database is getting hit the most? I have of course ssms installed on the machine as well. As you can tell, my sysadmin skills are very very limited - any help would be much appreciated.

    Read the article

  • Looking for a short term solution to improve website performance with additional server

    - by Tanim Mirza
    I am working with a small team to run an internal website running with PHP 5.3.9, MySQL 5.0.77. All the files and database are hosted on a dedicated Linux machine with the following configuration: Intel Xeon E5450 8 CPU cores @3.00GHz, 2992.498 MHz, Cache 6148 KB, Cent OS – Red Hat Enterprise Linux Server release 5.4 We started small and then the database got bigger and now the website performance degraded significantly. We often get server space overrun, mysql overloaded with too many calls, etc. We don't have much experience dealing with these issues. We recently got another server that we were thinking to use to improve performance. Since it has better configuration, some of us wanted to completely move everything to the new machine. But I am trying to find out how we can utilize both machine for optimized performance. I found options such as MySQL clustering, Load balancer, etc. I was wondering if I could get any suggestion for this situation "How to utilize two machines in short term for best performance", that would be great. By short term we are looking for something that we can deploy in a month or so. Thanks in advance for your time.

    Read the article

  • Improving Chrome performance on OSX

    - by Giannis
    There are a number of sites that do not display properly on Safari and I need to switch to Chrome. Although when the content of the sites requires flash player, Chrome will consume a significant amount of CPU. Running more than 3 windows, will cause my MBP to overheat, start the fans, and reduce battery life way more than Safari. What I am looking for is suggestions on ways to improve performance of Chrome running flash. I know Safari is optimised for OSX, but any improvement is welcome. Following I have a demo to display the issue. I am running same youtube video on Safari 6 and Chrome 21,both updated,at the same time. Both browsers have been reseted and have no extensions. This is run on MBP 13" 2012 with 2.9 i7 running OSX 10.8.1. p.s If any additional details can help please let me know.

    Read the article

  • IIS7 Compression Configuration

    - by Level1Coder
    Hi, Previously when I used IIS6, I used IIS6 Metabase Explorer to edit Metabase.xml and manually turned on compression, specified the compression level and the file extensions to compress. IIS7 seems a bit different, there is no Metabase.xml file in the system32\inetsrv folder. Enabling compression is easy to turn on by checking the checkbox in the Compression module. But how do I manually tweak and set the compression levels and file extensions to compress? I also ran across an article saying that IIS7 also automatically throttles the compression if your CPU load is 50% then compression is turned off. Where are all these settings located?

    Read the article

  • Is putting the swapfile & temp folder to ramdisk a good idea in Windows 7 64 bit with lots of RAM?

    - by Tony_Henrich
    I want my Windows to run as fast as possible. If I have 12GB RAM in Windows 7 64bit, quad core CPU, and all apps fit in memory, will the swap file ever be used for anything? The question is about if it's a good idea to put the swap file in a RAM disk. Would a RAM disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder on a RAM disk. I know the RAM disk is volatile memory and I don't care about its content if it gets lost.

    Read the article

  • Server freeze (Disk I/O possibly)

    - by user973917
    I have a Windows Server 2008 machine that is resyncing disks after a powerloss. The issue is that the system becomes unresponsive after about 10 minutes. We've checked with resource monitor and found that the CPU's aren't maxed; but the disk I/O is well over 250MB/s. We've attempted copying data from 1 disk to another; bypassing syncing of disks and this too causes the machine to freeze after about 10 minutes of copying data. I have attempted to let the machine resync the disks for a few days with the machine on in this "frozen" state. By frozen I mean that NOTHING works on the machine, it's completely unresponsive; no mouse movement, etc. I want to know how I would go about definitively checking if this is Disk I/O that is freezing the system. I know that disk I/O can freeze a system; but what can I use to run tests to be sure?

    Read the article

  • Squid Proxy Antivirus - Recommendations / Performance

    - by Jon Rhoades
    Due to our user's increasing expertise at downloading virus and the like, we are investigating adding Antivirus to our Squid proxy. A casual Google reveals several free and one paid: HAVP squid-vscan Viralator Safe Squid (commercial) None of the 'free' ones have reached v1 yet, nor do any inspire huge confidence form their websites (although of course I would rather they spent their time on the app rather than their website!). Does anybody have experience with any of these (or any other similar apps). If so are they suitable for a production network with 400ish concurrent users, and what sort of CPU/RAM requirements does it have?

    Read the article

  • Command line is horribly slow in Ubuntu Server

    - by hekevintran
    I am running Ubuntu Server on VirtualBox. I am not using X Windows, only the command line. It looks like it is redrawing the screen for every line that causes the screen to shift down. In other words if there is empty space on the screen below the current line, it works normally, but if the current line is at the bottom of the screen, when the system moves to the next line it refreshes the whole screen line by line. This causes the system to run very slowly because I have to wait for the whole screen to refresh for every line and it hits the CPU at 90%. I installed Debian Lenny in VirtualBox and it didn't do this. Why does Ubuntu Server redraw the screen for each line? Is there a way to make this behaviour go away?

    Read the article

  • Server Memory with Magento

    - by Mohamed Elgharabawy
    I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

    Read the article

  • How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

    - by jfmessier
    I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

    Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >