Search Results

Search found 10369 results on 415 pages for 'png 24'.

Page 145/415 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• How to route all traffic over site to site VPN tunnel?

  - by Hutch

  I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

  Read the article

• "C variable type sizes are machine dependent." Is it really true? signed & unsigned numbers ;

  - by claws

  Hello, I've been told that C types are machine dependent. Today I wanted to verify it. void legacyTypes() { /* character types */ char k_char = 'a'; //Signedness --> signed & unsigned signed char k_char_s = 'a'; unsigned char k_char_u = 'a'; /* integer types */ int k_int = 1; /* Same as "signed int" */ //Signedness --> signed & unsigned signed int k_int_s = -2; unsigned int k_int_u = 3; //Size --> short, _____, long, long long short int k_s_int = 4; long int k_l_int = 5; long long int k_ll_int = 6; /* real number types */ float k_float = 7; double k_double = 8; } I compiled it on a 32-Bit machine using minGW C compiler _legacyTypes: pushl %ebp movl %esp, %ebp subl $48, %esp movb $97, -1(%ebp) # char movb $97, -2(%ebp) # signed char movb $97, -3(%ebp) # unsigned char movl $1, -8(%ebp) # int movl $-2, -12(%ebp)# signed int movl $3, -16(%ebp) # unsigned int movw $4, -18(%ebp) # short int movl $5, -24(%ebp) # long int movl $6, -32(%ebp) # long long int movl $0, -28(%ebp) movl $0x40e00000, %eax movl %eax, -36(%ebp) fldl LC2 fstpl -48(%ebp) leave ret I compiled the same code on 64-Bit processor (Intel Core 2 Duo) on GCC (linux) legacyTypes: .LFB2: .cfi_startproc pushq %rbp .cfi_def_cfa_offset 16 movq %rsp, %rbp .cfi_offset 6, -16 .cfi_def_cfa_register 6 movb $97, -1(%rbp) # char movb $97, -2(%rbp) # signed char movb $97, -3(%rbp) # unsigned char movl $1, -12(%rbp) # int movl $-2, -16(%rbp)# signed int movl $3, -20(%rbp) # unsigned int movw $4, -6(%rbp) # short int movq $5, -32(%rbp) # long int movq $6, -40(%rbp) # long long int movl $0x40e00000, %eax movl %eax, -24(%rbp) movabsq $4620693217682128896, %rax movq %rax, -48(%rbp) leave ret Observations char, signed char, unsigned char, int, unsigned int, signed int, short int, unsigned short int, signed short int all occupy same no. of bytes on both 32-Bit & 64-Bit Processor. The only change is in long int & long long int both of these occupy 32-bit on 32-bit machine & 64-bit on 64-bit machine. And also the pointers, which take 32-bit on 32-bit CPU & 64-bit on 64-bit CPU. Questions: I cannot say, what the books say is wrong. But I'm missing something here. What exactly does "Variable types are machine dependent mean?" As you can see, There is no difference between instructions for unsigned & signed numbers. Then how come the range of numbers that can be addressed using both is different? I was reading http://stackoverflow.com/questions/2511246/how-to-maintain-fixed-size-of-c-variable-types-over-different-machines I didn't get the purpose of the question or their answers. What maintaining fixed size? They all are the same. I didn't understand how those answers are going to ensure the same size.

  Read the article

• SPF record doesn't work (not sure which DNS server to tweak)

  - by Ion

  Problem: Google (and perhaps others) marks our emails as SPF neutral. Let me give you some background about the setup: initially got a dedicated server (Hetzner) with Plesk installed to host a domain/web application, let's say: bigjaws.com. Plesk automatically creates a DNS zone for it with some records for the various services it provides out of the box, e.g. webmail.bigjaws.com as a CNAME to bigjaws.com to provide Horde/whatever, etc. Let me point out four relevant of these records (where XXX.XXX.XXX.158 is our dedicated IP): bigjaws.com. A XXX.XXX.XXX.158 mail.bigjaws.com. A XXX.XXX.XXX.158 bigjaws.com MX (10) mail.bigjaws.com. bigjaws.com. TXT v=spf1 +a +mx -all The above records are not(?) valid anymore though, because after using this dedicated server for a while, our site got bigger and bigger so we decided to move our operations over to AWS (EC2, RDS, ELB, etc), but we retained the mail functionality as is, i.e. emails from [email protected] are sent by connecting to our dedicated server where Plesk takes care of things. This was decided in order not to setup anything from scratch. Of course for all DNS-related things we now use Route53. In Route53 I have the following records: mail.schoox.com. A XXX.XXX.XXX.158 bigjaws.com. MX (10) mail.bigjaws.com bigjaws.com. SPF "v=spf1 +ip4:XXX.XXX.XXX.158 +mx ~all" From my understanding of SPF, the SPF status should have been passed: I designate that all email being sent by bigjaws.com from XXX.XXX.XXX.158 are valid/not spam (I added +mx there but I'm not sure if needed). When a mail server receives an email, doesn't it lookup the SPF record of the domain and checks against the IP it got the email from? Checking with spfquery: root@box:~# spfquery -ip XXX.XXX.XXX.158 -sender [email protected] -rcpt-to [email protected] StartError Context: Failed to query MAIL-FROM ErrorCode: (2) Could not find a valid SPF record Error: No DNS data for 'bigjaws.com'. EndError noneneutral Please see http://www.openspf.org/Why?id=employee1%40bigjaws.com&ip=XXX.XXX.XXX.158&receiver=spfquery : Reason: default spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com Received-SPF: neutral (spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com) client-ip=XXX.XXX.XXX.158; [email protected]; If I go to the address listed above (openspf.org) it tells me that the message should have been accepted(!): spfquery rejected a message that claimed an envelope sender address of [email protected]. spfquery received a message from static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) that claimed an envelope sender address of [email protected]. The domain bigjaws.com has authorized static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) to send mail on its behalf, so the message should have been accepted. It is impossible for us to say why it was rejected. What should I do? If the problem persists, contact the bigjaws.com postmaster. Also, here are some headers from an email sent by one of our [email protected] addresses to a gmail.com address (by the way, bigjaws.de listed in the "Received: from" field was the initial domain hosted on the dedicated server before adding the .com one -- both are still listed as separate subscriptions under Plesk). Delivered-To: [email protected] Received: by 10.14.177.70 with SMTP id c46csp289656eem; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) X-Received: by 10.14.102.66 with SMTP id c42mr306186eeg.47.1382515860386; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) Return-Path: <[email protected]> Received: from bigjaws.de (static.158.XXX.XXX.XXX.clients.your-server.de. [XXX.XXX.XXX.158]) by mx.google.com with ESMTPS id l4si19438578eew.161.2013.10.23.01.10.59 for <[email protected]> (version=TLSv1 cipher=RC4-SHA bits=128/128); Wed, 23 Oct 2013 01:10:59 -0700 (PDT) Received-SPF: neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=XXX.XXX.XXX.158; Authentication-Results: mx.google.com; spf=neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=bigjaws.com; b=WwRAS0WKjp9lO17iMluYPXOHzqRcOueiQT4rPdvy3WFf0QzoXiy6rLfxU/Ra53jL1vlPbwlLNa5gjoJBi7ZwKfUcvs3s02hJI7b3ozl0fEgJtTPKoCfnwl4bLPbtXNFu; h=Received:Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding; Received: (qmail 22722 invoked from network); 23 Oct 2013 10:10:59 +0200 Received: from hostname.static.ISP.com (HELO ?192.168.1.60?) (YYY.YYY.ISP.IP) by static.158.XXX.XXX.XXX.clients.your-server.de. with ESMTPSA (DHE-RSA-AES256-SHA encrypted, authenticated); 23 Oct 2013 10:10:59 +0200 Message-ID: <[email protected]> Date: Wed, 23 Oct 2013 11:11:00 +0300 From: BigJaws Employee <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: [email protected] Subject: test SPF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit test SPF Any ideas why SPF is not working correctly? Also, are there any DNS settings that are not needed anymore and create a problem?

  Read the article

• Hover/Fadeto/Toggle Multiple Class Changing

  - by Slick Willis

  So my problem is rather simple and complex at the same time. I am trying to create links that fade in when you mouseover them and fade out when you mouseout of them. At the same time that you are going over them I would like a pic to slide from the left. This is the easy part, I have every thing working. The image fades and another image slides. I did this by using a hover, fadeto, and toggle("slide"). I would like to do this in a table format with multiple images being able to be scrolled over and sliding images out. The problem is that I am calling my sliding image to a class and when I hover over the letters both images slide out. Does anybody have a solution for this? I posted the code that I used below: <html> <head> <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-1.4.2.min.js'></script> <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-custom-181/jquery-ui-1.8.1.custom.min.js'></script> <style type="text/css"> .text-slide { display: none; margin: 0px; width: 167px; height: 50px; } </style> <script> $(document).ready(function(){ $(".letterbox-fade").fadeTo(1,0.25); $(".letterbox-fade").hover(function () { $(this).stop().fadeTo(250,1); $(".text-slide").toggle("slide", {}, 1000); }, function() { $(this).stop().fadeTo(250,0.25); $(".text-slide").toggle("slide", {}, 1000); }); }); </script> </head> <body style="background-color: #181818"> <table> <tr> <td><div class="letterbox-fade"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/A-Letterbox-Selected.png" /></div></td> <td><div class="text-slide"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/TEST.png" /></div></td> </tr> <tr> <td><div class="letterbox-fade"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/B-Letterbox-Selected.png" /></div></td> <td><div class="text-slide"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/TEST.png" /></div></td> </tr> </table> </body> </html>

  Read the article

• Linux file permissions seem right but I can't write to a directory

  - by CaseyB

  I believe that I have the permissions set correctly but I can't write to a directory. Here's my problem: cborders@Kraken:/var/www$ ls -la total 12 drwxrwxr-x 2 webz webz 4096 2011-12-30 14:58 ./ drwxr-xr-x 13 root root 4096 2011-12-30 14:58 ../ -rw-rw-r-- 1 webz webz 177 2011-12-30 14:58 index.html cborders@Kraken:/var/www$ id cborders uid=1000(cborders) gid=1000(cborders) groups=1000(cborders),4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),113(lpadmin),114(admin),1002(webz) cborders@Kraken:/var/www$ mkdir test mkdir: cannot create directory `test': Permission denied The owner of the directory is a user called webz and the permissions allow the user and group rwx access to it. I am in the webz group but I still can't make any changes. What am I doing wrong here?

  Read the article

• creating secure multicast with socat

  - by arash

  How we can create secure tunnels multicast with socat? Assume we have a list of ip address, CIDR network addresses that we want to create secure tunnel to them. I found this socat STDIO UDP4-DATAGRAM:224.1.0.1:6666,range=192.168.10.0/24 but I want a secure tunnel and different adds with net addrs I want to create script that give the IPs and net addresses and create secure tunnel ./myscript IP1 NetAdd1 IP2 NetAdd2 .... how can i send this parametersw to socat? Socat multicast hasn't any limits? Thanks for your help

  Read the article

• website is accessible through dns1. but not with WWW

  - by Pushpendra

  i have a domain and i am using freehostia as a web hoster. In the name server of domain i have registered the name of both servers of freehostia. And in my control panel in the hosted domain section its showing "1 Hosted Domains / 1 Domains Listed".however on clicking on that its showing an error that "The selected domain name has not been registered yet. Please register it from the Domain Manager section first" now whenever i am trying to access my website by using dns1. its accessible but when i am using WWW. its not accessible for example my domain name is example.com if i will type dns1.example.com then my webpage will open but when i type www.example.com its showing "Oops! Google Chrome could not find www.example.com" And for information 24 hours has been passed since i have registered my name servers.

  Read the article

• information about /proc/pid/sched

  - by redeye

  Not sure this is the right place for this question, but here goes: I'm trying to make some sense of the /proc/pid/sched and /proc/pid/task/tid/sched files for a highly threaded server process, however I was not able to find a good explanation of how to interpret this file ( just a few bits here: http://knol.google.com/k/linux-performance-tuning-and-measurement# ) . I assume this entry in procfs is related to newer versions of the kernel that run with the CFS scheduler? CentOS distro running on a 2.6.24.7-149.el5rt kernel version with preempt rt patch. Any thoughts?

  Read the article

• NAT Error Message - Usage limit exceeded

  - by Kato

  Trying to configure a port to use for Vuze. Using the NAT/server port test, I was getting a message saying the connection timed out, the port was probably closed. I went back and made sure to open the specific port on my router, firewall, etc, but now I'm getting "NAT Error - Usage limit exceeded (173.32.41.24:0). I'm on a mac pro running leopard, trial versions of intego netbarrier and virusbarrier. Network utilities and netbarrier both claim the port is open. I've tested a bunch of other ports, but all give the same message.

  Read the article

• How to make fonts smooth and readable in Debian/Ubuntu?

  - by jmdeldin

  What is the best, most foolproof way of getting nice font rendering in Linux? Currently, I am experiencing thin, ugly fonts (shown below). I have wasted too much time tweaking fonts.conf, and I have yet to find a decent combination. I am running Debian 6.0 with no desktop environment (just Openbox for a window manager) in a VM on a Macbook Pro (OS X 10.7.4). Screenshots The following screenshots were taken without fonts.conf and .Xdefaults tweaks. running in "native" Openbox environment: http://i.imgur.com/10bnH.png running over X11, which looks a little worse than Openbox: http://i.imgur.com/sq8jk.png Thank you!

  Read the article

• Use teamviewer for running web server [closed]

  - by Steve

  I have a PC behind NAT. I want to host a web server on it which is accessible from the internet. I cannot open any blocked ports nor do i have admin rights on the computer. But it has a teamviewer client running on it 24*7 to which i do have access(no vpn installed). I can accesss this client from anywhere using teamviewer. I want to know if somehow i can use teamviewer to get a ip/hostname that is accessible from the internet and host a webserver. Also is it possible to get an ip if i get admin access but without opening ports.

  Read the article

• eTrayz: Replace base system with a bootstrapped Debian

  - by knoopx

  I bought an eTrayz NAS time ago. The device is more or less good but it ships with a closed-source custom linux and a bunch of broken web-apps. I wanted to replace the whole system with a raw Debian installation. I successfully bootstrapped a Lenny Debian into a chroot and I'm able to use use it. However I would like it to be the default system and to boot automatically at login. The device itself ships with a bundled 2.6.24.4 kernel. I think the kernel is on a dedicated flash memory so I would prefere not to re-flash it. What do you think is the best way to accomplish it?

  Read the article

• Apache freezing, How to detect which virtual host is getting hit?

  - by mr-euro

  I have a production server that in the last 24 hours has been hard rebooted 4 times due to freezes. Ping is fine but all other services time-out (Apache, SSHd, etc). I have now diagnosed it to Apache running out of memory due to an exorbitant amount of child processes forking suddenly within seconds of starting Apache. Stopping Apache just after rebooting keeps the server stable again. My two questions are: Is there a way to detect which of the vhosts is being suddenly hammered without looking into each vhost's access log one by one? Is there a way to quickly enable/disable vhosts without commenting (#) them all out in httpd.conf?

  Read the article

• TCP 3 way handshake

  - by Tom

  Hi, i'm just observing what NMAP is doing for the 3 ports it reports are open. I understand what a half-scan attack is, but what's happening doesnt make sense. NMAP is reporting ports 139 are 445 are open..... all fine. But when i look at the control bits, NMAP never sends RST once it has found out the port is open, It does this for port 135- but not 139 and 445. This is what happens: (I HAVE OMITTED THE victim's replies) Sends a 2 (SYN) Sends a 16 (ACK) Sends a 24 (ACK + PST) Sends a 16 (ACK) Sends a 17 (ACK + FIN) I dont get why NMAP doesnt 'RST' ports 139 and 445??

  Read the article

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• ATI AMD Radeon 6670M 2GB Dual External monitors

  - by kellax

  I have HP Pavilion dv7 BeatsAudo model: dv7-6b with following specifications: CPU: Intel i7-2670QM ( Quad Core ) 8 CPU's @ 2.2Ghz RAM: 8GB @ 1066 GPU: ATI Radeon HD 6770M 1GB Notebook has two slots: HDMI and VGA On my VGA i have an external monitor 24" Samsung, any idea if my notebook could support a second external monitor as well. I do a lot of development work, i havent got a second monitor to test it yes but i know there can be problems. I would like to have a monitor connected on my VGA and on my HDMI so two external monitors and notebooks monitor. Would this be viable ?

  Read the article

• Emacs eshell over SSH not obeying key commands or elisp

  - by Brad Wright

  When SSHing to a remote server Eshell doesn't behave very well, e.g: M-x eshell ssh server <tab> *inserts literal tab instead of trying to complete* Hitting <tab>, for instance, inserts a literal tab. Is there no way to get tab completion, lisp interaction (like find-file blah) etc. over SSH? All the documentation I've read says Eshell is "TRAMP-aware", which I assume meant it could deal with this. Am I just wrong in my assumption that it would work over SSH, or is something broken? This is on Emacs 24.0.94 pretest.

  Read the article

• Why does the command forfiles list files that are not a day old despite the command being otherwise?

  - by PeanutsMonkey

  The command I am executing is forfiles -p"C:\testdata" -m*.* -d-1 -c"cmd /c echo @PATH\@FILE" I have specified that I wish to only list files that are a day old however when I execute the statement, it returns me a list of files that were created today. Why is that? Am I doing something wrong? Would it be better to specify a time period as opposed to a date e.g. 24 hours? The version of forfiles I have reads as follows FORFILES v 1.1 - [email protected] - 4/98. The batch file is being run on Windows XP.

  Read the article

• Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

  - by Robert

  From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

• What to do if you were scammed by a web hosting company? [on hold]

  - by Cain Nuke

  I was recently scammed by a web hosting company. Is there anything i can do about it? I would like to sue them but that doesn't sound realistic to me since they are not based on the same country as me. I would like to at least be able to have them blacklisted or something so other people don't get scammed too. I would appreciate if you can tell me how to proceed in these cases. They promise 24/7 support which is not true because its only one guy managing the whole thing and your server can go down for days and he doesn't do anything, he wont even reply your tickets. My server is been offline for over a week now and he only ignores me. I paid for this month and shortly after that my server went offline. I used Paypal to pay. He is in Bulgaria (that's what he says) i'm in Japan. I paid $55 USD.

  Read the article

• Enabling SFTP Access within PLESK

  - by spelley

  I have a client who wants to ensure his upload is secure, so we are trying to enable SFTP for him on our Linux PLESK server. I have enabled SSH access to bin/bash for FTP accounts, and created a new user. When I attempt to SFTP using either the IP address or the domain name, this is the error FileZilla is giving me: Error: Authentication failed. Error: Critical error Error: Could not connect to server Here is some basic information regarding the server: Operating system Linux 2.6.24.5-20080421a Plesk Control Panel version psa v8.6.0_build86080930.03 os_CentOS 5 I had read in some places that I should reboot the SSH Service in Server - Services, however, there is no SSH Service within the list. I'm not really a server guy so it's quite possible I'm missing something obvious. Thanks for any help that you guys can provide!

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• .VBS scripts have stopped running... No idea why!

  - by Django Reinhardt

  We have two .vbs scripts that are run by our Task Scheduler that have suddenly stopped working for no reason we can fathom. We haven't significantly altered our system configuration in the last 24 hours, and the scripts have run without a hitch for months. According to the Task Scheduler the scripts just keep running and never stop, which is never the case. I stopped all running versions through the Scheduler and manually attempted to run one of the .vbs scripts. I got the following error message: Line: 15 Error: The system cannot locate the resource specified. Code: 800C0005 Source: msxml3.dll Line 15 (or 16 to be more accurate - line 15 itself is blank, but so is line 1) is: xml.Send Would could have suddenly caused this? Looking in system32\ and sysWOW64\ shows that msxml3.dll exists. Anybody got any ideas? Thanks a lot!

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >