Search Results

Search found 12013 results on 481 pages for 'dvd drive'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 146/481 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Setup for NEW HDD?

    - by Ed Markey
    Building my FIRST computer. Will start with at least - one HDD, I purchased a WD SATA HDD a 10,000RPM VelociRaptor 500GB. I have read that if you use one of the settings, can't remember what it's called, that it would make an HDD rund at IDE speeds??? Could I or should I run it in RAID instead? Is RAID only for more than one HDD/ssd? I would like to get like a 64GB SSD later to maybe speed things up working together. Thanks

    Read the article

  • Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

    - by Visitor
    I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

    Read the article

  • How can I find which logon script is being run?

    - by user2517266
    I'm having an issue with network drives. Suddenly some computers and users aren't getting their mapped network drives from the logon script. I am NOT a domain admin, I don't have permission to login to the domain controller. And I know very little about Active Directory. The issue seems random, some users this day, different users tomorrow. Some computers run fine and some won't map no matter who logs in. They are mixed OS's XP (SP3), Vista, and 7. I was looking at the domain in windows explorer and I have found the batch file(s) that maps the drives in several locations, how do I know which one is actually being ran? The .bat file is located in \DOMAIN\NETLOGON\script.bat and \DOMAIN\SYSVOL\DOMAIN\scripts\script.bat and \DOMAIN\SYSVOL\DOMAIN\policies\GUID(Right? It's a crazy string)\User\Scripts\Logon\script.bat So, how can I figure out which one is actually being ran per computer or user? Cause they are all slightly different from each other and one of them doesn't map properly. Do all the files in NETLOGON get ran? Cause there are 15+ files in there. Or is it specified in Group Policy which one(s) get ran? EDIT: I am able to access a program called Active Directory Users and Computers, but the properties tab for any user is blank for the logon script.

    Read the article

  • How to fix a Corrupted USB

    - by Help
    My USB stick has suddenly stopped working. It's a Busbi 4GB. My USB used to be G:/ but as soon as I plugged it in, I used to get a pop up box showing that it was plugged in. Now, when I plug this in, it shows as I:/ and no pop up box appears. It shows in my computer as I:/ and when I click to open it says I:/ is not accessible the disk structure is corrupted and unreadable. I have tried to change the file name back to G:/ but nothing happened (this was under disk management). On disk management, it shows Volume as I:/ Layout simple Type Basic File system RAW status Healthy (Active,Primary partition) Capacity 3.42GB. I've tried right clicking properties then the tab tools and click error checking (this option will check the volume for errors). When I click "check now" it comes up with the disk check could not be performed because Windows cannot access the disk.

    Read the article

  • Tool to test HDD for health?

    - by Ognjen
    I've had my HDD replaced, and now my computer is freezing every 1 to 5 minutes for 5 to 10 seconds. Actually, only active applications freeze (but it can be ANY application), usually when I click something, but sometimes by themselves. How can I check if this is HDD issue or software issue? I don't want to send my laptop for second HDD replacement right away, since the last service took 40 days, so I am looking for a tool that could confirm that this is a HDD issue.

    Read the article

  • Too Much Swapping, even though RAM is 2/3 Empty

    - by indyaah
    I have a VPS with 9GB RAM, 300GB HDD, 3 GB Swap, 7 Cores. The OS is CentOS 5.7 Final. I have postgres9.0 running on my machine, with proper tuning done (at least by book/wiki of PostgreSQL). What happens is most of the times when some complex query run (by complex I mean select with maximum 3 Joins), eventhough 66% of my RAM is unused there is ~99% swapping is happening. Plus it screws up my disk IO which is most of the time reaching ~100% and slows down everything else. (I tend to believe something's wrong with my disk.) I dont understand the reason of this much of swapping happening. Is it because of context switching?? Most of the time my processors are idle, while the IO wait goes upto 30% during pick times. Would appreciate if some can shed some light on it. Thanks.

    Read the article

  • How to access files on a USB-connected NTFS disk removed from a Win7 notebook?

    - by yosh m
    My daughter seems to have fried her motherboard in her Lenovo Notebook. The disk seems to be fine. I removed the disk and used a universal disk-to-USB kit to attach it to another computer. The disk is recognized fine and I can peruse it in Windows Explorer. The problem is that the files she would like to recover from it are located in places that Windows refuses to let me access. When I try, for example, to enter the directory "Documents and Settings" it gives me an "Access is denied" error. Same thing when I try to go into the various User directories and other locations. I thought to try creating a Ghost image & retrieve the files from that, but Ghost seems to croak when I try to run it - apparently it doesn't like accessing the disk via a USB connection (even though I've told it to install the drivers for USB). Any other ideas about how to get to the files I need, either through Windows or perhaps some other OS that I could boot from a CD that can read an NTFS disk? Thanks, Yosh

    Read the article

  • In Linux, is there a way to get a warning if I forget to unplug my pendrive?

    - by missingno
    I forgot my pendrive plugged in when leaving the computer lab yesterday, and I would have lost it if it wasn't for a kind soul finding and returning it. I want to avoid this in the future and apparently there are some tools you can use in windows that warn you if you are leaving a pendrive behind when logging off or shutting down the computer. Is there anything similar that works on Linux? I need this to work on Fedora 17 (GNOME 3 shell), and preferably without requiring administrator privileges.

    Read the article

  • Is it worth having SATA 6GB/s cables? [duplicate]

    - by zyboxenterprises
    This question already has an answer here: Are all SATA cables compatible with SATA 3? 2 answers I've just received some SATA 3 6GB/s cables that I ordered last week, and it struck me how ordinary they look when compared to normal standard SATA cables. My PCI-E SATA3 card is yet to arrive. My question is, would a standard SATA cable have the same transfer speeds as my SATA 3 6GB/s cables? Question is similar to this one, but however it doesn't have an answer. This question isn't asking 'are all SATA cables compatible with SATA 3', it's asking whether SATA 2 and SATA 3 transfer speeds are the same.

    Read the article

  • opening a GUID usb stick in windows 7

    - by altomic
    so I have a mac which I have files on. I put in a GUID formatted usb stick and dropped some files on to it. took the stick and plugged in to my netbook with win7. In Devices & Printers it shows up. It also appears in "safely remove hardware". no actual letter or device when i search for it in other ways. Question - how do I access the files of my GUID usb stick on my windows 7 netbook? thanks

    Read the article

  • Why might one hard disk perform slower than another?

    - by Styne666
    I have just bought two WD 3TB Reds (WD30EFRX) for a FreeNAS box and whilst doing burn-in testing it seems like one is consistently taking about 10% longer than the other. So far I've done: a dd read test of the whole device, a long SMART test and it's currently halfway through a badblocks -wvs. The second device is lagging behind the first on all of them. I'm running these commands on Debian stable in two Konsole tabs. Is there a reason this could be considered normal behaviour or is it worth running the tests independantly? They're both plugged in to the LSI 2308 (IT mode) on a Supermicro X10SL7-F.

    Read the article

  • Laptop HDD not mounting.

    - by D3X
    I have a laptop with broken (shorted out) motherboard and a 640 GB HDD. I want to recover my data from the hard disk. Every time I connect the hard disk using an external casing, it is being detected in the disk management service but not visible in my computer, nor accessible through command prompt. The Hard Disk is functioning as I can feel the hard disk rotor working properly when connected using the casing. Also the LED on the hard disk is blinking, the data is there but i am unable to access the data. Someone please suggest me ways of using the hard-disk as a slave disk using casing.

    Read the article

  • 1TB HDD making strange noise (not a common one)

    - by Darkkurama
    I built a new PC some days ago, and everything seems perfect, except that the 1 TB HDD I cloned from my old 500 GB HDD is making a deep weird sound. First of all, every time I access the disk, I hear a deep sound, and when the PC is turning on, I hear some clicking (the rapid clicking is my mouse, I'm opening and closing folders to trigger the vibrating deep weird sound I'm describing). I'm using this 1TB disk for data mainly (I use a SSD as the OS). As background information, the disk is a seagate barracuda 7200 rpm which was RMAd and replaced with a refurbished one. Maybe the refurbished disks make these noises? should I worry about my data? (although the disk is working normal and passed a seagatetools short generic test? Thanks! PS: I recorded the sounds, just click on the links. Thanks

    Read the article

  • Why doesn't HDDlife® work onmy computer?

    - by Chenthurij
    Why doesn't HDDlife® work on my computer? Instead, it displays the message that no disks are found. First, make sure that you use the latest drivers for your system. We encountered compatibility problems with the following drivers: Intel Application Accelerator, nVidia nForce platform drivers, and VIA 4-in-1. But, all these problems are fixed in the latest versions of the drivers. To be safe, download the most recent version from the manufacturer's site and install it. HDDlife® supports only IDE and Serial ATA disks, but does not support RAID disks. IS it correct way?

    Read the article

  • Making(programming) virtual drives on windows XP

    - by Manux
    Ahoy, I'd like to mount a "virtual drive" myself on Windows XP, I guess using the windows API. What I thought about would be like a server interface, meaning explorer.exe would send "queries", like, list directory, or get file through a pipe or whatever... I know some programs do it, maybe not the way I think it is done, but what the heck, if you know anything, enlighten me please!

    Read the article

  • Searching for SD-cards

    - by Shaddix
    I need to implement searching for SD-cards in my program. Currently I'm using search for all removable devices like: searcher = New Management.ManagementObjectSearcher("\\localhost\root\cimv2", "SELECT DeviceId FROM Win32_LogicalDisk WHERE DriveType=2 AND Size>0"); But it find USB flash drives also. Is there a proper way to find SD-cards only? What I need is in general only drive letter for available SD-cards (like "F:" or so).

    Read the article

  • HP SmartArray P400: How to repair failed logical drive?

    - by TegtmeierDE
    I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

    Read the article

  • Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD because of CD only drive.

    - by studiohack23
    Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD in the drive because it only supports CDs as I found out after the fact. I'm a complete novice @ servers, so if you need more detail, let me know, and I'll try to provide it. This server is around 4-6 years old. it has "PXE" boot, not sure what that means? This particular server has 3 RAID hard drives. As far as I know, they have all been wiped. I looked up the service tag on Dell, and it has: Compact Disk Drive, 650M, I Internal, Half Height, 48X, BlackHitachi LG Data Storage as its CD drive. Thus, the CD drive does not support DVDs, so installation will have to be via a live CD. However, I'm trying to put Amahi Home Server (http://www.amahi.org/), and Live CD/USB stick installs are not recommended unless one is an expert Linux user. any suggestions as to how to get around this? PROBLEM SOLVED! THANKS for all the help!

    Read the article

  • External USB attached drive works in Windows XP but not in Windows 7. How to fix?

    - by irrational John
    Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >