Search Results

Search found 5084 results on 204 pages for 'brute force'.

Page 148/204 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Raid superblock missing on single parition. Recovery needed!

  - by user171639

  Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

  Read the article

• SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

  - by Mladen Prajdic

  With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

  Read the article

• Ubuntu 12.04 - PPTP VPN is the only Internet Access

  - by user212553

  I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• Is it unusual for a small company (15 developers) not to use managed source/version control?

  - by LordScree

  It's not really a technical question, but there are several other questions here about source control and best practice. The company I work for (which will remain anonymous) uses a network share to host its source code and released code. It's the responsibility of the developer or manager to manually move source code to the correct folder depending on whether it's been released and what version it is and stuff. We have various spreadsheets dotted around where we record file names and versions and what's changed, and some teams also put details of different versions at the top of each file. Each team (2-3 teams) seems to do this differently within the company. As you can imagine, it's an organised mess - organised, because the "right people" know where their stuff is, but a mess because it's all different and it relies on people remembering what to do at any one time. One good thing is that everything is backed up on a nightly basis and kept indefinitely, so if mistakes are made, snapshots can be recovered. I've been trying to push for some kind of managed source control for a while, but I can't seem to get enough support for it within the company. My main arguments are: We're currently vulnerable; at any point someone could forget to do one of the many release actions we have to do, which could mean whole versions are not stored correctly. It could take hours or even days to piece a version back together if necessary We're developing new features along with bug fixes, and often have to delay the release of one or the other because some work has not been completed yet. We also have to force customers to take versions that include new features even if they just want a bug fix, because there's only really one version we're all working on We're experiencing problems with Visual Studio because multiple developers are using the same projects at the same time (not the same files, but it's still causing problems) There are only 15 developers, but we all do stuff differently; wouldn't it be better to have a standard company-wide approach we all have to follow? My questions are: Is it normal for a group of this size not to have source control? I have so far been given only vague reasons for not having source control - what reasons would you suggest could be valid for not implementing source control, given the information above? Are there any more reasons for source control that I could add to my arsenal? I'm asking mainly to get a feel for why I have had so much resistance, so please answer honestly. I'll give the answer to the person I believe has taken the most balanced approach and has answered all three questions. Thanks in advance

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Windows scheduled task fails to complete with error code 0xc000013a

  - by Brian

  I'm using Windows Server 2003 and have a scheduled task that fails to complete. The task is set to run a Windows Command Script (.cmd) at 3pm each day. The script runs a program that extracts some data from a SQL Server database and uploads that data to an FTP server. The error code displayed in the "Last result" column of the scheduled tasks folder is 0xc000013a. A quick Google search leads to this Microsoft support page that states: The most common "C" error code is "0xC000013A: The application terminated as a result of a CTRL+C". No-one is logged in at the time the task runs, so there's no-one around to press CTRL+C. I'm not sure I understand what is being said here in the Microsoft documentation. I've checked the rudimentary things - the scheduled task is enabled, scheduled to run each day, and pointing to a file that does exist in a valid location. Interestingly, when I run this task manually (either by running the .cmd script from the command line, or by right-clicking the task and clicking "Run") the task completes successfully. What does this error code mean, and how can I get this task to run when I'm not there to force it?

  Read the article

• How to disable the RAID in x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• powershell v2 remoting - How do you enable unecrypted traffic

  - by Peter Walke

  I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

• Why can't I delete my depot on Perforce?

  - by teukkam

  I'm just messing around in a local Perforce database, trying to figure out how I can reset Perforce back to a previous state without journaling or deleting and recreating the database files. I have some depots without files, one of them is called "sandbox". I created it with the p4 depot command either from the command line or using the P4Python API (at this point I don't remember which). When I type: p4 depot -d sandbox I get this: Depot sandbox isn't empty. To delete a depot, all file revisions must be removed and all lazy copy references from other depots must be severed. Use 'p4 obliterate' or 'p4 snap' to break file linkages from other depots, then clear this depot with 'p4 obliterate', then retry the deletion. I tried p4 obliterate -y sandbox which just says No records to delete. which is expectable as the depot is empty. Anyway it doesn't change the result from p4 depot -d. There are also no connections from other depots as the error message suggests. Any idea what is happening and is there a foolproof way to force a depot to be deleted without deleting the server files altogether? Ultimately I want to do this automatically from P4Python.

  Read the article

• Active FTP client blocked by Windows Firewall on Windows 7

  - by Eli

  I have an application that runs as a service and contains an FTP client. It needs to connect to an FTP server that only supports Active FTP. When I attempt to get a list of files or download a file, Windows Firewall is dropping the incoming connection from the FTP server. (I don't believe we had this problem in Windows XP or Windows Vista.) Active FTP is the protocol that requires the the server to open a connection to the client on a port that the client specified. (http://slacksite.com/other/ftp.html) I know I could open up a large port range in Windows Firewall and force my FTP client to only use those ports, but I would have guessed that Windows Firewall would support Active FTP natively. Is there some setting that needs to be made in order to have Windows Firewall automatically detect Active FTP and open up the necessary ports as needed? Can I change that setting programmatically? Thanks. PS- I asked this question on StackOverflow, but was told I should probably ask here as well.

  Read the article

• Zscaler. Certs, cookies, and port 80 traffic

  - by 54's_lol

  So I work at HQ for a large company that shall remain nameless. We use Zscaler and I had to roll out a 2048 cert per zscaler's request. People around me at work dont understand the technology and think that the cert's are what is allowing internet connectivity. From my understanding(and please chime in) is the cookie located C:\Users\$$$$$$4$$\AppData\Roaming\Macromedia\Flash Player#SharedObjects\Q3JQJQJV\gateway.zscaler.net\zscaler.swf here that gets created when you provide your creds the first time you use the browser. The cert's are just simply a way of inspecting the SSL traffic as zscaler had no way of doing this before without them. They are essentially using the classic MITM attack to parse your SSL traffic. Gmail is smart enough to recognize this as you get a warning. My question is this, is there a product or service that I can use to verify my web browser when at home(I.E. off company network) isn't still getting routed to zscaler's cloud? If i do a tracert that will work fine. It's the port 80 and 443 web traffic zscaler and my company is after. I would like to verify that when I'm off their premise that my web traffic is using only my isp and the path to whatever content I'm searching for. Do the cert's i'm pushing and browser authentication do something behind the curtain that forces web traffic to get routed to zscaler? I searched quite a bit and would very much like to know if I'm ever off company scrutiny. I do know zscaler offers the service to force the scenario im asking about. Can I prove how my web traffic is getting routed? Thanks for any insight. I've been a fan for a long time and your guy's kung fu is very strong:-)

  Read the article

• iSCSI, failover and XenServer

  - by jemmille

  I have an iSCSI fail over implementation setup so if one of my storage units fails the other takes over immediately (it also runs the NFS shares). When fail over occurs, volumes are exported, the IP is switched to the other machine and the targets are reconfigured. The fail over of the storage system itself works just fine. I use NexentaStor for my filer. When I do a test (manual) fail over of my storage the following occurs: Note: I run the admin VM's on NFS and customer based VM's on iSCSI All NFS based VM's remain up and working perfectly through the failover and after All VM 's running on iSCSI eventually report the following: An error about not being able to write to a particular block An error about journaling not working Then the file system goes RO To get the VM's working again I have to do the following: Force shutdown of the "broken" VM's. Detach the iSCSI SR Re-attach the iSCSI SR Boot the VM on a different server (5 in my pool) If I don't boot on a different server I get this error "Internal error: Failure("The VDI <uuid&gt; is already attached in RW mode; it can't be attached in RO mode!")" The only way I have found to fix that error is to reboot the entire server it was running on previously which is obviously a huge pain. Currently multipathing is NOT enabled (but can be and the same thing still occurs). I have edited much of the /etc/iscsid.conf file to work with the timeout settings but to no avail. In short, my storage fails over properly but XenServer does not keep the connection alive. As a thought, the error that shows up in #4 above might be the ultimate cause and fixing that would fix everything? Any help would be appreciated more than you know.

  Read the article

• How to actually defragment a JFFS2 filesystem

  - by Julie in Austin

  I have searched all over the Internet, including on a number of StackExchange forums, for a workable method for defragmenting a JFFS2 filesystem and cannot find an answer. The system in question has a 256MB NAND flash part. It is being accessed as a MTD device which is divided into three partitions. The third partition is where the root file system is being stored as a JFFS2 file system. The issue is that writes to the root file system have non-deterministic performance due to the usual issues of the JFFS2 garbage collector deciding to run at the worst possible times. When that happens, the product is hung for some unknown length of time while the garbage collector (and pdflush) run. Changing the file system isn't an option. The solution needs to be something that can run during off-hours that after having been run results in more predictable write performance. Right now I am working on a program that will attempt to force the garbage collector to run, then delete the file with the hope that all of the freed nodes are suddenly more readily available and make writes perform better. Thoughts?

  Read the article

• ntpdate -d Server dropped Strata too high

  - by AndyM

  I cannot sync with a NTP source thats coming from an internal router/firewall. Anyone help ? ntppdate -d 192.168.92.82 6 Jun 11:57:30 ntpdate[5011]: ntpdate [email protected] Tue Feb 24 06:32:26 EST 2004 (1) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) 192.168.92.82: Server dropped: strata too high server 192.168.92.82, port 123 stratum 16, precision -19, leap 11, trust 000 refid [73.78.73.84], delay 0.02591, dispersion 0.00002 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000 originate timestamp: d1972e03.0ae02645 Mon, Jun 6 2011 11:44:19.042 transmit timestamp: d197311b.0ffac1d2 Mon, Jun 6 2011 11:57:31.062 filter delay: 0.02609 0.02591 0.02594 0.02596 0.00000 0.00000 0.00000 0.00000 filter offset: -792.020 -792.020 -792.020 -792.020 0.000000 0.000000 0.000000 0.000000 delay 0.02591, dispersion 0.00002 offset -792.020152 6 Jun 11:57:31 ntpdate[5011]: no server suitable for synchronization found Edit The server I'm being asked to sync to is a firewall , and I've now been told that it is not syncing with anything. So I suppose I need to know if I can force my server to sync with a server that is stratum 16 i.e not sync'd. Is that possible ?

  Read the article

• Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

  - by Tim Visher

  Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

  Read the article

• Find a non-case-sensitive text string within a range of cells

  - by Iszi

  I've got a bit of a problem to solve in Excel, and I'm not quite sure how to go about doing it. I've done a few searches online, and haven't really found any formulas that seem to be useful. Here's the situation (simplified just a bit, for the purpose of this question): I have data in columns A-E. I need to match data in the cells in A and B, with data in C-E, and return TRUE or FALSE to column F. Return TRUE if: - The string in A is found within any string in C-E. OR - The string in B is found within any string in C-E. Otherwise, return FALSE. The strings must be exact matches for whole or partial strings within the range, but the matching function must be case-insensitive. I've taken a screenshot of an example sheet for reference. I'm fairly sure I'll need to use IF or on the outermost layer of the formula, probably followed by OR. Then, for the arguments to OR, I'm expecting there will be some use of IFERROR involved. But what I'm at a loss for is the function I could most efficiently use to handle the text string searches. VLOOKUP is very limited in this regard, I think. It may be workable to do whole-string against whole-string comparisons, but I'm fairly certain it won't return accurate results for partial string matches. FIND and SEARCH appear limited to only single-target searches, and are also case-sensitive. I suppose I could use UPPER or LOWER to force case-insensitivity in the search, but I still need something that can do accurate partial matching and search a specified range of cells. Is there any function, or combination of functions, that could work here? Ideally, I want to do this with a straight Excel formula. I'm not at all familiar with VBScript or similar tools, nor do I have time to learn it for this project.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Zimbra MTA settings

  - by user192702

  Hi have some questions for Zimbra v8.0.6GA. Under Configure - MTA - Network, I'm seeing a few settings and am not very clear what to do with them. Web mail MTA Host name Is this for delivering local mail only (ie not for external mails)? According to this link, it says the following. That's a mouthful but what is "composed messages"? Is this for a multi server deployment where the Postfix server for Zimbra isn't installed on the same box that as the rest of the servers? Webmail MTA is used by the Zimbra server for composed messages and must be the location of the Postfix server in the Zimbra MTA. Relay MTA for external delivery My understanding after reading the doc is that if my ISP doesn't force me to relay outgoing mails through them, and I have enabled DNS lookup, I can leave this blank? Inbound SMTP host name Sorry I know this is explained as "If your MX records point to a spam-relay or any other external non-Zimbra server, enter the name of that server in the Inbound SMTP host name field." but I'm not following. Can someone provide an example? MTA Trusted Networks The admin doc says "To set up MTA trusted networks on a per server basis, make sure that MTA trusted networks have been set up as global settings and then go the Configure Servers MTA page and in the MTA Trusted Networks field enter the trusted network addresses for the server." However I see out of the box it has default networks setup for the server whereas on a global level it's blank. Does this mean there is a bug with the install software and I have to copy the setting from the server to the global setting?

  Read the article

• Easiest way to allow direct HTTPS connection in Intercept mode?

  - by Nick Lin

  I know the SSL issue has been beaten to death I'm using DNS redirect to force my clients to use my intercept proxy. As we all know, intercepting HTTPS connection is not possible unless I provide a fake certificate. What I want to achieve here is to allow all HTTPS requests connect directly to the source server, thus bypassing Squid: HTTP connection Proxy by Squid HTTPS connection Bypass Squid and connect directly I spent the past few days goolging and trying different methods but none worked so far. I read about SSL tunneling using the CONNECT method but couldn't find any more information on it. I tried a similar method in using RINETD to forward all traffic going through port 443 of my Squid back to the original IP of www.pandora.com. Unfortunately, I did not realize all other HTTPS requests are also forwarded to the IP of www.pandora.com. For example, https://www.gmail.com also takes me to https://www.pandora.com Since I'm running the Intercept mode, the forwarding needs to be dynamic and match each HTTPS domain name with proper original IP. Can this be done in Squid or iptables? Lastly, I'm directing traffic to my Squid server using DNS zone redirect. For example, a client requests www.google.com, my DNS server directs that request to my Squid IP, then my transparent Squid will proxy that request. Will this set up affect what I'm trying to achieve? I tried many methods but couldn't get it to work. Any takes on how to do this?

  Read the article

• Converting Lighttpd config to NginX with php-fpm

  - by Le Dude

  Having so much issue with NginX configuration since I'm new with NginX. Been using Lighttpd for quite sometime. Here are the base info. New Machine - CentOS 6.3 64 Bit - NginX 1.2.4-1.e16.ngx - Php-FPM 5.3.18-1.e16.remi Old Machine - CentOS 6.2 64Bit - Lighttpd 1.4.25-3.e16 Original Lighttpd config file: ####################################################################### ## ## /etc/lighttpd/lighttpd.conf ## ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. ## ####################################################################### ####################################################################### ## ## Some Variable definition which will make chrooting easier. ## ## if you add a variable here. Add the corresponding variable in the ## chroot example aswell. ## var.log_root = "/var/log/lighttpd" var.server_root = "/var/www" var.state_dir = "/var/run" var.home_dir = "/var/lib/lighttpd" var.conf_dir = "/etc/lighttpd" ## ## run the server chrooted. ## ## This requires root permissions during startup. ## ## If you run Chrooted set the the variables to directories relative to ## the chroot dir. ## ## example chroot configuration: ## #var.log_root = "/logs" #var.server_root = "/" #var.state_dir = "/run" #var.home_dir = "/lib/lighttpd" #var.vhosts_dir = "/vhosts" #var.conf_dir = "/etc" # #server.chroot = "/srv/www" ## ## Some additional variables to make the configuration easier ## ## ## Base directory for all virtual hosts ## ## used in: ## conf.d/evhost.conf ## conf.d/simple_vhost.conf ## vhosts.d/vhosts.template ## var.vhosts_dir = server_root + "/vhosts" ## ## Cache for mod_compress ## ## used in: ## conf.d/compress.conf ## var.cache_dir = "/var/cache/lighttpd" ## ## Base directory for sockets. ## ## used in: ## conf.d/fastcgi.conf ## conf.d/scgi.conf ## var.socket_dir = home_dir + "/sockets" ## ####################################################################### ####################################################################### ## ## Load the modules. include "modules.conf" ## ####################################################################### ####################################################################### ## ## Basic Configuration ## --------------------- ## server.port = 80 ## ## Use IPv6? ## #server.use-ipv6 = "enable" ## ## bind to a specific IP ## #server.bind = "localhost" ## ## Run as a different username/groupname. ## This requires root permissions during startup. ## server.username = "lighttpd" server.groupname = "lighttpd" ## ## enable core files. ## #server.core-files = "disable" ## ## Document root ## server.document-root = server_root + "/lighttpd" ## ## The value for the "Server:" response field. ## ## It would be nice to keep it at "lighttpd". ## #server.tag = "lighttpd" ## ## store a pid file ## server.pid-file = state_dir + "/lighttpd.pid" ## ####################################################################### ####################################################################### ## ## Logging Options ## ------------------ ## ## all logging options can be overwritten per vhost. ## ## Path to the error log file ## server.errorlog = log_root + "/error.log" ## ## If you want to log to syslog you have to unset the ## server.errorlog setting and uncomment the next line. ## #server.errorlog-use-syslog = "enable" ## ## Access log config ## include "conf.d/access_log.conf" ## ## The debug options are moved into their own file. ## see conf.d/debug.conf for various options for request debugging. ## include "conf.d/debug.conf" ## ####################################################################### ####################################################################### ## ## Tuning/Performance ## -------------------- ## ## corresponding documentation: ## http://www.lighttpd.net/documentation/performance.html ## ## set the event-handler (read the performance section in the manual) ## ## possible options on linux are: ## ## select ## poll ## linux-sysepoll ## ## linux-sysepoll is recommended on kernel 2.6. ## server.event-handler = "linux-sysepoll" ## ## The basic network interface for all platforms at the syscalls read() ## and write(). Every modern OS provides its own syscall to help network ## servers transfer files as fast as possible ## ## linux-sendfile - is recommended for small files. ## writev - is recommended for sending many large files ## server.network-backend = "linux-sendfile" ## ## As lighttpd is a single-threaded server, its main resource limit is ## the number of file descriptors, which is set to 1024 by default (on ## most systems). ## ## If you are running a high-traffic site you might want to increase this ## limit by setting server.max-fds. ## ## Changing this setting requires root permissions on startup. see ## server.username/server.groupname. ## ## By default lighttpd would not change the operation system default. ## But setting it to 2048 is a better default for busy servers. ## ## With SELinux enabled, this is denied by default and needs to be allowed ## by running the following once : setsebool -P httpd_setrlimit on server.max-fds = 2048 ## ## Stat() call caching. ## ## lighttpd can utilize FAM/Gamin to cache stat call. ## ## possible values are: ## disable, simple or fam. ## server.stat-cache-engine = "simple" ## ## Fine tuning for the request handling ## ## max-connections == max-fds/2 (maybe /3) ## means the other file handles are used for fastcgi/files ## server.max-connections = 1024 ## ## How many seconds to keep a keep-alive connection open, ## until we consider it idle. ## ## Default: 5 ## #server.max-keep-alive-idle = 5 ## ## How many keep-alive requests until closing the connection. ## ## Default: 16 ## #server.max-keep-alive-requests = 18 ## ## Maximum size of a request in kilobytes. ## By default it is unlimited (0). ## ## Uploads to your server cant be larger than this value. ## #server.max-request-size = 0 ## ## Time to read from a socket before we consider it idle. ## ## Default: 60 ## #server.max-read-idle = 60 ## ## Time to write to a socket before we consider it idle. ## ## Default: 360 ## #server.max-write-idle = 360 ## ## Traffic Shaping ## ----------------- ## ## see /usr/share/doc/lighttpd/traffic-shaping.txt ## ## Values are in kilobyte per second. ## ## Keep in mind that a limit below 32kB/s might actually limit the ## traffic to 32kB/s. This is caused by the size of the TCP send ## buffer. ## ## per server: ## #server.kbytes-per-second = 128 ## ## per connection: ## #connection.kbytes-per-second = 32 ## ####################################################################### ####################################################################### ## ## Filename/File handling ## ------------------------ ## ## files to check for if .../ is requested ## index-file.names = ( "index.php", "index.rb", "index.html", ## "index.htm", "default.htm" ) ## index-file.names += ( "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" ) ## ## deny access the file-extensions ## ## ~ is for backupfiles from vi, emacs, joe, ... ## .inc is often used for code includes which should in general not be part ## of the document-root url.access-deny = ( "~", ".inc" ) ## ## disable range requests for pdf files ## workaround for a bug in the Acrobat Reader plugin. ## $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## ## url handling modules (rewrite, redirect) ## #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) ## ## both rewrite/redirect support back reference to regex conditional using %n ## #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} ## ## which extensions should not be handle via static-file transfer ## ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi ## static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) ## ## error-handler for status 404 ## #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' ## #server.errorfile-prefix = "/srv/www/htdocs/errors/status-" ## ## mimetype mapping ## include "conf.d/mime.conf" ## ## directory listing configuration ## include "conf.d/dirlisting.conf" ## ## Should lighttpd follow symlinks? ## server.follow-symlink = "enable" ## ## force all filenames to be lowercase? ## #server.force-lowercase-filenames = "disable" ## ## defaults to /var/tmp as we assume it is a local harddisk ## server.upload-dirs = ( "/var/tmp" ) ## ####################################################################### ####################################################################### ## ## SSL Support ## ------------- ## ## To enable SSL for the whole server you have to provide a valid ## certificate and have to enable the SSL engine.:: ## ## ssl.engine = "enable" ## ssl.pemfile = "/path/to/server.pem" ## ## The HTTPS protocol does not allow you to use name-based virtual ## hosting with SSL. If you want to run multiple SSL servers with ## one lighttpd instance you must use IP-based virtual hosting: :: ## ## $SERVER["socket"] == "10.0.0.1:443" { ## ssl.engine = "enable" ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" ## server.name = "www.example.com" ## ## server.document-root = "/srv/www/vhosts/example.com/www/" ## } ## ## If you have a .crt and a .key file, cat them together into a ## single PEM file: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ ## > /etc/ssl/private/lighttpd.pem ## #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" ## ## optionally pass the CA certificate here. ## ## #ssl.ca-file = "" ## ####################################################################### ####################################################################### ## ## custom includes like vhosts. ## #include "conf.d/config.conf" #include_shell "cat /etc/lighttpd/vhosts.d/*.conf" ## ####################################################################### ####################################################################### ### Custom Added by me #url.rewrite-once = (".*\.(js|ico|gif|jpg|png|css|jar|class)$" => "$0", "" => "/index.php") url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) # expire.url = ( "" => "access 1 days" ) include "myvhost-vhosts.conf" ####################################################################### Here is my Vhost file for lighttpd $HTTP["host"] =~ "192.168.8.35$" { server.document-root = "/var/www/lighttpd/qc41022012/public" server.errorlog = "/var/log/lighttpd/error.log" accesslog.filename = "/var/log/lighttpd/access.log" server.error-handler-404 = "/e404.php" } and here is my nginx.conf file user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/testsite/logs/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; # include /etc/nginx/conf.d/*.conf; ## I added this ## include /etc/nginx/sites-available/*; } Here is my NginX Vhost file server { server_name 192.168.8.91; access_log /var/log/nginx/myapps/logs/access.log; error_log /var/log/nginx/myapps/logs/error.log; root /var/www/html/myapps/public; location / { index index.html index.htm index.php; } location = /favicon.ico { return 204; access_log off; log_not_found off; } # location ~ \.php$ { # try_files $uri /index.php; # include /etc/nginx/fastcgi_params; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_param SCRIPT_NAME $fastcgi_script_name; location ~ \.php.*$ { rewrite ^(.*.php)/ $1 last; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; # fastcgi_param SCRIPT_FILENAME $document_root/index.php; # fastcgi_param PATH_INFO $uri; # fastcgi_pass 127.0.0.1:9000; # include fastcgi_params; } } We have a custom apps that we created that works great with lighttpd. I went through some headache also when we were trying to figure out how to make it work with lighttpd. this is the line that helps make it work in lighttpd. url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) but I couldn't figure out how to make it works in NginX. The webserver run just fine when we use the phpinfo.php test file. However as soon as I point it to my apps, nothing comes up. Check the error.log file and there's no error. Very mind boggling. I spent over 1 week trying to figure it out with no luck.. Please help?

  Read the article

• MySQL remote access not working - Port Close?

  - by dave.zap

  I am not able to get a remote connection established to MySQL. From my pc I am able to telnet to 3306 on the existing server, but when I try the same with the new server it hangs for few minutes then returns # mysql -utest3 -h [server ip] -p Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '[server ip]' (110) Here is some output from the server. # nmap -sT -O localhost -p 3306 ... PORT STATE SERVICE 3306/tcp closed mysql ... # netstat -anp | grep mysql tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 2 [ ACC ] STREAM LISTENING 12286 6349/mysqld /DATA/mysql/mysql.sock # netstat -anp | grep 3306 tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 3 [ ] STREAM CONNECTED 3306 1411/audispd # lsof -i TCP:3306 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 6349 mysql 10u IPv4 12285 0t0 TCP [domain]:mysql (LISTEN) I am running... OS CentOS release 5.8 (Final) mysql 5.5.28 (Remi) Note: Internal connections to mysql work fine. I have disabled IPtables, the box has no other firewall, it runs Apache on port 80 and ssh no problem. Had followed this tutorial - http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html I have bound the IP address in my.cnf user=mysql bind-address = [sever ip] port=3306 I even started over by deleting the mysql folder in my datastore and running mysql_install_db --datadir=/DATA/mysql --force Then recreated all the users as per the manual... http://dev.mysql.com/doc/refman/5.5/en/adding-users.html I have created one test user CREATE USER 'test'@'%' IDENTIFIED BY '[password]'; GRANT ALL PRIVILEGES ON *.* TO 'test'@'%' WITH GRANT OPTION; FLUSH PRIVILEGES; So all I can see is that the port is not really open. Where else might I look? thanks

  Read the article

• Windows 7 cannot view FAT32 formatted bootable usb drive

  - by NaimK

  I'm having some issue where when I run bootsect with a command line of "bootsect.exe /nt52 : /force /mbr", then Windows 7 (the comp I'm running bootsect on) can no longer view the contents of the usb drive. Explorer tries to look at it, and then fails, and I can't even correctly eject the drive, when I try, it does nothing until I yank it out, and then I get some errors. Bootsect reports success on writing the volume and the drive data to make it bootable, but it doesn't boot after copying on the necessary files (files from a created ISO, it works when it is created on XP). But this may be that I'm not following the same instructions as when building it on XP since some of the command don't seem to always work correctly. The drive is formatted to FAT32 (necessary I think, cause I'm installing a custom version of Win XP embedded). Any ideas? Or perhaps a good or automated way to load a usb with a custom version of win xp and make it bootable from Win 7? I am having some issues, for instance, "ufdprep.exe" rarely works when I'm running it from Windows 7, I don't know why.

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >