Search Results

Search found 528 results on 22 pages for 'netmask'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 15/22 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Creating static NAT blocks outbound traffic Cisco ASA

    - by natediggs
    Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

    Read the article

  • FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

    - by Koroviev
    What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

    Read the article

  • VPN still working after rebooting without client - DrayTek client shows "No Connection"

    - by HeavenCore
    My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

    Read the article

  • No Internet access while being connected to VPN using Cisco VPN Client 5.

    - by szeldon
    Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

    Read the article

  • MySQL Returns wrong values on SELECT statement

    - by Andrew K
    All, I'm wondering if this is a MySQL bug, but since I've seen others playing with larger numbers than this, I'm thinking I'm doing something wrong here. Here is my table structure for the table I'm querying: mysql describe ipspace6\G ************* 1. row ************* Field: id Type: decimal(39,0) unsigned Null: NO Key: Default: NULL Extra: ************* 2. row ************* Field: addr Type: decimal(39,0) unsigned Null: NO Key: PRI Default: 0 Extra: ************* 3. row ************* Field: netmask Type: decimal(39,0) unsigned Null: NO Key: Default: 0 Extra: ************* 4. row ************* Field: subnet Type: int(4) Null: NO Key: Default: NULL Extra: Now, I run a simple SELECT statement against the "id" column: mysql SELECT id FROM ipspace6 WHERE id='50552019118453823914642686339427860480'; +----------------------------------------+ | id | +----------------------------------------+ | 50552019118453823730175245602332344320 | | 50552019118453823730175245602332344320 | | 50552019118453823914642686339427860480 | | 50552019118453823914642686339427860480 | +----------------------------------------+ ...What the heck is going on here? Two of these results are valid, and two definitely are not. It's not like I'm doing some super-complex nested query or anything, this is simple stuff, and it's driving me insane. Help, anyone?

    Read the article

  • TCP Scanner Python MultiThreaded

    - by user1473508
    I'm trying to build a small tcp scanner for a netmask. The code is as follow: import socket,sys,re,struct from socket import * host = sys.argv[1] def RunScanner(host): s = socket(AF_INET, SOCK_STREAM) s.connect((host,80)) s.settimeout(0.1) String = "GET / HTTP/1.0" s.send(String) data = s.recv(1024) if data: print "host: %s have port 80 open"%(host) Slash = re.search("/", str(host)) if Slash : netR,_,Wholemask = host.partition('/') Wholemask = int(Wholemask) netR = struct.unpack("!L",inet_aton(netR))[0] for host in (inet_ntoa(struct.pack("!L", netR+n)) for n in range(0, 1<<32-Wholemask)): try: print "Doing host",host RunScanner(host) except: pass else: RunScanner(host) To launch : python script.py 10.50.23.0/24 The problem I'm having is that even with a ridiculous low settimeout value set, it takes ages to cover the 255 ip addresses since most of them are not assigned to a machine. How can i make a way faster scanner that wont get stuck if the port is close.MultiThreading ? Thanks !

    Read the article

  • How to make Connect Communications VPN connection in 10.10?

    - by Bilal Mohammad Qazi
    these steps were send by my iSP admin for ver10.10 and i'm using 11.10... step 1 sucessfully implemented till point 7 after that the problems are marked after '//' Step 2 i cannot completely do the step 2 How to make Connect Communications VPN connection in Ubuntu 10.10. 1st Step:- 1- Go to System > Administration > Synaptic Package Manage 2- Search for “PPTP”, check “network-manager-PPTP” and click “Apply” 3- Click on the Network Manager tray icon with your right mouse button and choose “Edit Connections…”. 4- Go to the “VPN” tab and click “Add”. 5- Choose “Point-to-Point Tunneling Protocol (PPTP)” as the VPN Connection Type 6- Check the VPN Connection Type and click “Create”. 7- Give your VPN connection a name and assign all the necessary information • Gateway = blue.connect.net.pk if you got Blue Package or • Gateway = green.connect.net.pk if you got Green Package or • Gateway = blueplus.connect.net.pk if you got BluePlus Package or • Gateway = red.connect.net.pk if you got Red Package • User name = Connect Communications Userid • Password = Connect Communications Password 8- Now Click on “Advanced” Authentication • Unchecked “PAP" // cannot uncheck • Unchecked “MSCHAP" // cannot uncheck • Unchecked “CHAP" • Checked only “MSCHAPv2" EAP shown in ver11.10 and cannot be unchecked Security And Compression. • Unchecked “Use Point-to-Point encryption (MPPE)”. • Unchecked “Allow statefull encryption”. • Unchecked “Allow BSD data Compression”. • Unchecked “Allow Deflate data Compression”. • Unchecked “Use TCP Header Compression”. • Unchecked “Send PPP echo Packets” Then Press “OK” then “Apply”. 9-Now you are able to connect to the specified VPN connection via the Networking Manager Then you can connect to VPN in the menu bar and your Internet icon will have a lock when the connection is successful. 2nd Step:- Open Terminal window. First, you open a terminal (Applications > Accessories > Terminal): Run command “sudo” Now gave root Password. Then run command “netstat -r -n” It will show some lines and for example from the last line pick the IP from 2nd column like 10.111.0.1 0.0.0.0 10.111.0.1 0.0.0.0 UG 0 0 0 eth0 Now run the fallowing command. echo “route add -net 10.101.8.0 netmask 255.255.252.0 gw 10.152.24.1” > /etc/rc.local note :- 10.111.0.1 is an example IP now run “ sh /etc/rc.local “

    Read the article

  • Why does my MySQL remote-connection fail (VLAN)?

    - by Johannes Nielsen
    ubuntu-community! Again I have a problem with my special friend MySQL :D I have got two servers - a database-server and a web-server - who are connected via VLAN. Now I want the web-server to have remote access to the database-server's MySQL. So I created the user user in mysql.user. user's Host is xxx.yyy.zzz.9 which is the internal IP-address of the web-server. xxx.yyy.zzz.0 is the network. I also created user with Host % . As long as I use MySQL on the database-server logging in as user, everything works fine. But trying to log in as user from xxx.yyy.zzz.9 using mysql -h xxx.yyy.zzz.8 -u user -p (where xxx.yyy.zzz.8 is the database-server's internal IP), I get ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.yyy.zzz.8' (110) So I tried to activate Bind-Address in the my.cnf file. Well, if I use xxx.yyy.zzz.8, nothing changes. But if I try xxx.yyy.zzz.9 and try to restart MySQL, I get mysql stop/waiting start: Job failed to start I checked the log files and found - nothing. The database-server's MySQL doesn't even register, that the web-server tries to connect remotely. My idea is, that maybe I didn't configure the VLAN properley, even though I asked someone who actually knows such stuff and he told me, I did everything right. What I wrote into /etc/networking/interfaces is: #The VLAN auto eth1 iface eth1 inet static address xxx.yyy.zzz..8 netmask 255.255.255.0 network xxx.yyy.zzz.0 broadcast xxx.yyy.zzz.255 mtu 1500 ifconfig returns eth1 Link encap:Ethernet HWaddr xxxxxxxxxxxxxx inet addr:xxx.yyy.zzz.8 Bcast:xxx.yyy.zzz.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxxxxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:241146 errors:0 dropped:0 overruns:0 frame:0 TX packets:9765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17825995 (17.8 MB) TX bytes:566602 (566.6 KB) Memory:fb900000-fb920000 for the eth1, what is, what I configured. (This is for the database-server, the web-server looks similar). ethtool eth1 returns: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000003 (3) drv probe Link detected: yes (This is for the database-server, the web-server looks similar). Actually I think, everything is right, but it still doesn't work. Is there someone with an idea? EDIT: I commented ou Bind-Address in my.cnf after it didn't work.

    Read the article

  • Ubuntu Server Cannot Route to the Internet

    - by ejes
    I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

    Read the article

  • Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

    - by Donal
    I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

    Read the article

  • Duplicate ping response when running Ubuntu as virtual machine (VMWare)

    - by Stonerain
    I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

    Read the article

  • PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

    - by athspk
    I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

    Read the article

  • Yum update not working on CentOS 6.2 minimal install

    - by Owen
    Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

    Read the article

  • routing table permissions under Windows 7 and openvpn

    - by pilcrow
    My ovpn client, 32-bit OpenVPN 2.1.1 on 64-bit Windows 7 Pro, cannot accept routes pushed to it by my remote endpoint ovpn server. This happens even if I invoke OpenVPN as a member of Administrators, and whether or not I've specified script-security 2 (as suggested by [this question][2]). Mon Mar 29 12:57:19 2010 Notified TAP-Win32 driver to set a DHCP IP/netmask of 192.168.254.3/255.255.255.0 on interface {8BE2E9CF-F4C9-4A5E-98FD-E12DF1B6C3A4} [DHCP-serv: 192.168.254.3, lease-time: 86400] Mon Mar 29 12:57:19 2010 NOTE: FlushIpNetTable failed on interface [14] {GUID} (status=5) : Access is denied. Mon Mar 29 12:57:24 2010 TEST ROUTES: 8/8 succeeded len=8 ret=1 a=0 u/d=up Mon Mar 29 12:57:24 2010 C:\WINDOWS\system32\route.exe ADD 172.20.1.0 MASK 255.255.255.0 192.168.254.1 Mon Mar 29 12:57:24 2010 ROUTE: route addition failed using CreateIpForwardEntry: Access is denied. [status=5 if_index=14] Mon Mar 29 12:57:24 2010 Route addition via IPAPI failed [adaptive] Mon Mar 29 12:57:24 2010 Route addition fallback to route.exe Mon Mar 29 12:57:24 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1 ... and so on for each specific route the server pushes out. It doesn't seem right to me that the administrative user, the one configured at Windows 7 install time, should need further privileges. What am I missing?

    Read the article

  • nokia cell phone not accepting IP from dnsmasq dhcp server

    - by samix
    Hello, I having problem connecting a NOkia cell phone to my home wifi network. The wifi network is provided by a wireless card in a machine running Debian Testing and 2.6.26-2-686 kernel. The cars is D-Link DWL-G520 working in ap mode and has WPA encryption enabled. The wireless network is provided by hostapd using madwifi driver. Windows and Mac machines work properly with this wifi network. When I try to get the Nokia phone to connect to the wifi network, I get these lines in my dnsmasq log (to see lines without wrapping, here is the pastebin link for convenience - http://pastebin.com/m466c8fd2): Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: disassociated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: associated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 RADIUS: starting accounting session 4AE664FA-00000036 Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: pairwise key handshake completed (WPA) Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: group key handshake completed (WPA) Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 Available DHCP range: 192.168.5.150 -- 192.168.5.199 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPDISCOVER(ath0) 0.0.0.0 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPOFFER(ath0) 192.168.5.21 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 12:hostname, 6:dns-server, 15:domain-name, Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 1:netmask, 3:router, 28:broadcast, 120:sip-server Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 tags: known, ath0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 next server: 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 1 option: 53:message-type 02 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 54:server-identifier 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 51:lease-time 00:00:46:50 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 58:T1 00:00:23:28 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 59:T2 00:00:3d:86 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 1:netmask 255.255.255.0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 28:broadcast 192.168.5.255 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 3:router 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 6:dns-server 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 8 option: 15:domain-name home.pvt Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 3 option: 12:hostname NokiaCellPhone Anybody know the problem might be? If I switch off dnsmasq dhcp queries logging, i.e. if I decrease the verbosity of the log, all I see are two lines of DHCPDISCOVER(ath0) and DHCPOFFER(ath0) repeatedly in the log with no acceptance by the cell phone. It appears as though the phone is not accepting the dhcp offer. However, if I give the phone a static IP address in its configuration, it works properly on the wifi network. So it appears as though the problem is dhcp related. Hints? Suggestions? Installed stuff: $ dpkg -l dnsmasq hostap* | grep ^i ii dnsmasq 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii dnsmasq-base 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii hostapd 1:0.6.9-3 user space IEEE 802.11 AP and IEEE 802.1X/WPA/ Thanks. PS: Here is the DHCP tcp dump for more information (with mac addresses changed): $ sudo dhcpdump -i ath0 -h ^11:22:33:44:55:66 TIME: 2009-10-30 12:15:32.916 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.923 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:38.919 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.920 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.921 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.945 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:48.952 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 ... and so on ...

    Read the article

  • I am getting a SQUID Error

    - by Dave
    Hello, What exactly is wrong here Entry in SQUID File--- httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on acl lan src 192.168.1.1 192.168.2.0/24 http_access allow localhost Error after: service squid restart 2010/02/01 14:24:29| Processing Configuration File: /etc/squid/squid.conf (depth 0) 2010/02/01 14:24:29| cache_cf.cc(361) parseOneConfigFile: squid.conf:10 unrecognized: 'broken_vary_encoding' 2010/02/01 14:24:29| WARNING: Netmasks are deprecated. Please use CIDR masks instead. 2010/02/01 14:24:29| WARNING: IPv4 netmasks are particularly nasty when used to compare IPv6 to IPv4 ranges. 2010/02/01 14:24:29| WARNING: For now we assume you meant to write /0 2010/02/01 14:24:29| WARNING: (B) '::/4294967200' is a subnetwork of (A) '::' 2010/02/01 14:24:29| WARNING: because of this '::' is ignored to keep splay tree searching predictable 2010/02/01 14:24:29| WARNING: You should probably remove '::/4294967200' from the ACL named 'all' 2010/02/01 14:24:29| WARNING: Netmasks are deprecated. Please use CIDR masks instead. 2010/02/01 14:24:29| WARNING: IPv4 netmasks are particularly nasty when used to compare IPv6 to IPv4 ranges. 2010/02/01 14:24:29| WARNING: For now we assume you meant to write /128 2010/02/01 14:24:29| aclParseIpData: unknown netmask '255.255.255.255' in '127.0.0.1/255.255.255.255' FATAL: Bungled squid.conf line 25: acl localhost src 127.0.0.1/255.255.255.255 Squid Cache (Version 3.1.0.14): Terminated abnormally. CPU Usage: 0.013 seconds = 0.006 user + 0.007 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Also please provide me with the simplest squid script for the proxy to run. Restrictions can be entered. Thanks Dave

    Read the article

  • SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

    - by Kendall
    Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

    Read the article

  • Heartbeat won't successfully start up resources from a cold boot when a failed node is present

    - by Matthew
    I currently have two ubuntu servers running Heartbeat and DRBD. The servers are directory connected with a 1000Mbps crossover cable on eth1 and have access to an IP camera LAN on eth0. Now, let's say that one node is down and the remaining functional node is booting after having been shut down. The node that is still functioning won't start up heartbeat and provide access to the drbd resource from a cold boot. I have to manually restart heartbeat by sudo service heartbeat restart to get everything up and running. How can I get it to start fine from a cold start, when only one server is present? Here is the ha.cf: debug /var/log/ha-debug logfile /var/log/ha-log logfacility none keepalive 2 deadtime 10 warntime 7 initdead 60 ucast eth1 192.168.2.2 ucast eth0 10.1.10.201 node EMserver1 node EMserver2 respawn hacluster /usr/lib/heartbeat/ipfail ping 10.1.10.22 10.1.10.21 10.1.10.11 auto_failback off Some material from the syslog: harc[4604]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/status status mach_down[4632]: 2012/11/27_13:54:49 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquired mach_down[4632]: 2012/11/27_13:54:49 info: mach_down takeover complete for node emserver2. Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: Initial resource acquisition complete (T_RESOURCES(us)) Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: mach_down takeover complete. IPaddr[4679]: 2012/11/27_13:54:49 INFO: Resource is stopped Nov 27 13:54:49 EMserver1 heartbeat: [4605]: info: Local Resource acquisition completed. harc[4713]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/ip-request-resp ip-request-resp ip-request-resp[4713]: 2012/11/27_13:54:49 received ip-request-resp IPaddr::10.1.10.254 OK yes ResourceManager[4732]: 2012/11/27_13:54:50 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[4759]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 start IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated nic for 10.1.10.254: eth0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated netmask for 10.1.10.254: 255.255.255.0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: eval ifconfig eth0:0 10.1.10.254 netmask 255.255.255.0 broadcast 10.1.10.255 IPaddr[4804]: 2012/11/27_13:54:50 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/drbddisk r0 start Filesystem[4965]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 start Filesystem[5039]: 2012/11/27_13:54:50 INFO: Running start for /dev/drbd1 on /shr Filesystem[5033]: 2012/11/27_13:54:51 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:51 info: Running /etc/init.d/nfs-kernel-server start Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: Local Resource acquisition completed. (none) Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: local resource transition completed. Nov 27 13:57:46 EMserver1 heartbeat: [4586]: info: Heartbeat shutdown in progress. (4586) Nov 27 13:57:46 EMserver1 heartbeat: [5286]: info: Giving up all HA resources. ResourceManager[5301]: 2012/11/27_13:57:46 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[5372]: 2012/11/27_13:57:46 INFO: Running stop for /dev/drbd1 on /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: Trying to unmount /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: unmounted /shr successfully Filesystem[5366]: 2012/11/27_13:57:47 INFO: Success ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[5509]: 2012/11/27_13:57:47 INFO: ifconfig eth0:0 down IPaddr[5497]: 2012/11/27_13:57:47 INFO: Success Nov 27 13:57:47 EMserver1 heartbeat: [5286]: info: All HA resources relinquished. Nov 27 13:57:48 EMserver1 heartbeat: [4586]: info: killing /usr/lib/heartbeat/ipfail process group 4603 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBFIFO process 4589 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4590 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4591 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4592 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4593 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4594 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4595 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4596 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4597 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4598 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4599 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4589 exited. 11 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4596 exited. 10 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4598 exited. 9 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4590 exited. 8 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4595 exited. 7 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4591 exited. 6 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4592 exited. 5 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4593 exited. 4 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4597 exited. 3 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4594 exited. 2 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4599 exited. 1 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: emserver1 Heartbeat shutdown complete. Here is some more from the log ResourceManager[2576]: 2012/11/28_16:32:42 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[2602]: 2012/11/28_16:32:42 INFO: Running OK Filesystem[2653]: 2012/11/28_16:32:43 INFO: Running OK Nov 28 16:32:52 EMserver1 heartbeat: [1695]: WARN: node emserver2: is dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Dead node emserver2 gave up resources. Nov 28 16:32:52 EMserver1 ipfail: [1807]: info: Status update: Node emserver2 now has status dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Link emserver2:eth1 dead. Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: NS: We are still alive! Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: Link Status update: Link emserver2/eth1 now has status dead Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Asking other side for ping node count. Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Checking remote count of ping nodes. Nov 28 16:32:57 EMserver1 heartbeat: [1695]: info: Heartbeat shutdown in progress. (1695) Nov 28 16:32:57 EMserver1 heartbeat: [2734]: info: Giving up all HA resources. ResourceManager[2751]: 2012/11/28_16:32:57 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[2829]: 2012/11/28_16:32:57 INFO: Running stop for /dev/drbd1 on /shr Filesystem[2829]: 2012/11/28_16:32:57 INFO: Trying to unmount /shr Filesystem[2829]: 2012/11/28_16:32:58 INFO: unmounted /shr successfully Filesystem[2823]: 2012/11/28_16:32:58 INFO: Success ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[2971]: 2012/11/28_16:32:58 INFO: ifconfig eth0:0 down IPaddr[2958]: 2012/11/28_16:32:58 INFO: Success Nov 28 16:32:58 EMserver1 heartbeat: [2734]: info: All HA resources relinquished. Nov 28 16:32:59 EMserver1 heartbeat: [1695]: info: killing /usr/lib/heartbeat/ipfail process group 1807 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBFIFO process 1777 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1778 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1779 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1780 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1781 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1782 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1783 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1784 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1785 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1786 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1787 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1778 exited. 11 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1779 exited. 10 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1780 exited. 9 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1781 exited. 8 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1782 exited. 7 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1783 exited. 6 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1784 exited. 5 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1785 exited. 4 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1786 exited. 3 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1787 exited. 2 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1777 exited. 1 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: emserver1 Heartbeat shutdown complete. If I restarted heartbeat at this point... the resources heartbeat controls would start up fine.... please help!

    Read the article

  • Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

    - by user101012
    I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

    Read the article

  • PXE boot and DHCP server configuration Failing Auto Installation

    - by Harihara Vinayakaram
    I have a ISC DHCP Server installed on Ubuntu 9.10 . I have managed to successfully boot a PXE client , obtain a DHCP address and load the initrd.gz file. But I am facing a vague problem when the debian installer starts up and tries to get a DHCP server The client send a DHCP request and I verified that is the same MAC Address. But I get a DHCP DECLINE (The client declines the address ). It offers all the address in the pool and then there is a DHCP NAK (no more free leases ) I tried using the Option no-ping, and also option one-client-one-lease but it does not help . If I set the client to use a fixed-address then the above problem is not there and the installation proceeds smoothly Can you give me any clues on what should be the DHCP server configuration My dhcpd.conf looks like this { ddns-update-style none; option domain-name "hadoop-myorg.org"; option domain-name-servers 192.168.3.5; default-lease-time 600; max-lease-time 7200; group { filename "pxelinux.0"; next-server 192.168.13.184; host hadoop1 { hardware ethernet 90:e6:ba:d5:53:f8; } } subnet 192.168.13.0 netmask 255.255.255.0 { option routers 10.0.0.254; pool { option domain-name-servers 192.168.3.5; max-lease-time 3000; range 192.168.13.55 192.168.13.65; deny unknown-clients; } } }

    Read the article

  • Configure IPv6 routing

    - by godlark
    I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

    Read the article

  • Force Windows Local Subnet Traffic through a Gateway

    - by Beerey
    Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

    Read the article

  • How does Subnetting Work?

    - by Kyle Brandt
    How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

    Read the article

  • How to redirect all Internet traffic to OpenVPN Server

    - by JuliaS
    I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details: Server: Windows 2008 Server with one NIC OpenVPN IP Address: 192.168.0.1 Local NIC IP Address (connects the server to the Internet): 10.242.69.107 Client: Windows 7 with one NIC OpenVPN IP Address: 192.168.0.2 ISP allocated IP Address: 10.0.8.2 (gateway 10.0.8.1) Server OpenVPN Config: dev tun ifconfig 192.168.0.1 192.168.0.2 secret static.key push "redirect-gateway def1" Client OpenVPN Config: remote xxx.xxx.com dev tun ifconfig 192.168.0.2 192.168.0.1 secret static.key I'm not an expert with adding routes...etc. I would be grateful if someone could let me know how to add this entry in my server/client route table. EDIT: Output from the client's netstat -rnv IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.8.1 10.0.8.2 20 10.0.8.0 255.255.255.252 On-link 10.0.8.2 276 10.0.8.2 255.255.255.255 On-link 10.0.8.2 276 10.0.8.3 255.255.255.255 On-link 10.0.8.2 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.252 On-link 192.168.0.2 286 192.168.0.2 255.255.255.255 On-link 192.168.0.2 286 192.168.0.3 255.255.255.255 On-link 192.168.0.2 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.8.2 276 224.0.0.0 240.0.0.0 On-link 192.168.0.2 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.8.2 276 255.255.255.255 255.255.255.255 On-link 192.168.0.2 286 ===========================================================================

    Read the article

  • dnsmasq(as DHCP server) isn't working in KVM+libvirt envirmont

    - by user2681054
    I'm using dnsmasq as DHCP server in VM environment. But It didn't working. I disabled basic DHCP feature in libvirt. <network> <name>default</name> <uuid>84da0678-e56d-8fc2-6f8b-e8eba784849a</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:7B:64:0B'/> <ip address='192.168.122.1' netmask='255.255.255.0'> </ip> </network> As you can see, I removed this tag! <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> And I installed dnsmasq in Host machine. During installation dnsmasq, there was an error message about 127.0.0.1.(dnsmasq: failed to create listening socket for 127.0.0.1) So I commented out listen-address option, and added dhcp-range/dhcp-option options, like this. listen-address=127.0.0.1 dhcp-range=192.168.122.100,192.168.122.200,24h dhcp-option=option:router,192.168.122.1 That's all I've done with dnsmasq. But guest VM couldn't get IP address from host which is dnsmasq server running. After that , I installed isc-dhcp-server instead of dnsmasq.... and it works! But I still want to use dnsmasq instead of isc-dhcp-server. Are there any helping hands? I disabled host machine's firewall. I've heard that libvirt basically use dnsmasq. Is this the reason why I couldn't use dnsmasq in libvirt environment?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >