Search Results

Search found 1959 results on 79 pages for 'on board peripheral'.

Page 15/79 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• Cheap desktop computer in 19" rack-mountable form-factor?

  - by Alex Basson

  I'm a high school teacher at a small private school. As of this year, we have SMARTBoards in every classroom (though I've had one in the class I share for two years now). The classrooms themselves don't have computers in them, so we teachers bring our laptops to class and connect them to the boards. This has several disadvantages: This takes a few minutes while we wait for the board to boot up and then orient the board to our individual laptop -- we have to do this every time b/c different teachers have different laptops requiring different orientations. This isn't ideal because when you only have 43 minutes per class period, waiting five minutes just to get started is a real waste. Carrying your laptop to class doesn't sound so bad until you consider that we're also carrying textbooks and piles of student papers, and we're carrying it all through crowded high school hallways. More than one laptop has fallen THUNK to the floor, with dire consequences. We feel we could eliminate the need to use our laptops with the SMARTBoards if we had a dedicated computer in each classroom hooked up to the board at all times. Each board set-up is connected to a podium with a standard 19" rack in it, currently housing a power supply and DVD player. There're plenty of rack spaces available. So I'm thinking: maybe we could get some inexpensive computers in a 19" rack-mountable form factor, install them in the podiums, and connect them to the boards on a permanent basis. Any suggestions?

  Read the article

• Learn About Oracle’s Strategy for a Simple, Modern User Experience at OpenWorld 2012

  - by Applications User Experience

  By Kathy Miedema, Oracle Applications User Experience If you’re interested in what the best possible user experience looks like, you’ll want to hear what Oracle’s Applications User Experience team is planning for OpenWorld 2012, Sept. 30-Oct. 4 in San Francisco. This year, we will talk Fusion, Fusion, Fusion. We were among the first to show Oracle Fusion Applications in the last couple of years, and we’ll be showing it again this year so you can see what Oracle is planning for the next generation of enterprise applications. Attend our sessions to learn more about the user experience strategy in which Oracle is investing. Simplicity is the driving force behind the demos that we are unveiling now, which you can see at OpenWorld. We want to create opportunities for productivity and efficiency, and deliver enterprise data across devices to help you do your work in the way best suited to your job and needs, said Jeremy Ashley, Vice President, Oracle Applications User Experience. You can see the new look for Fusion Applications at a general session led by Ashley at 3:30 p.m. on Wednesday, Oct. 3. You’ll also have the chance to learn more about tailoring in Oracle Fusion Applications, and gain a new understanding of the investment in the user experience behind Fusion Applications at our sessions (see session information below). Inside the Oracle Applications User Experience team’s on-site lab at Oracle OpenWorld 2011. Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located. We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. Can’t participate in a customer feedback session or take a lab tour this time around? Visit Usable Apps to participate or book a tour another time. For more information on any OpenWorld sessions, check the content catalog – also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page. APPS UX OPENWORLD SESSIONS Oracle’s Roadmap to a Simple, Modern User Experience Presenter: Jeremy Ashley, Vice President Applications User Experience, Oracle; with Debra Lilley, Fujitsu Consulting; Basheer Khan, Innowave; and Edward Roske, InterRelSession ID: CON9467Date: Wednesday, Oct. 3 Time: 3:30 - 4:30 p.m.Location: Moscone West - 3002/3004 Jeremy Ashley Oracle Fusion Applications: Transforming Insight into Action Presenters: Killian Evers and Kristin Desmond, OracleSession ID: CON8718Date: Thursday, Oct. 4Time: 11:15 a.m. - 12:15 p.m.Location: Moscone West - 2008 “FRIENDS OF UX” OPENWORLD SESSIONS Sessions by the Oracle Usability Advisory Board (OUAB) members: Advances in Oracle Enterprise Governance, Risk, and Compliance Manager  Presenters: Koen Delaure, KPMG Advisory NV, and Oracle Usability Advisory Board member; Russell Stohr, Oracle Session ID: CON9389Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: Palace Hotel - Concert Optimize Oracle E-Busines Suite Procure-to-Pay: Cut Inefficiences/Fraud with Oracle GRC Apps Presenters: Koen Delaure, KPMG Advisory NV, and Solveig Wagner, Seadrill Management AS, both Oracle Usability Advisory Board members; and Swarnali Bag, OracleSession ID: CON9401Date: Monday, Oct. 1Time: 12:15 - 1:15 p.m.Location: Intercontinental - Sutter Showcase of JD Edwards EnterpriseOne Mobility Presenters: Jon Wells, Westmoreland Coal Co., Oracle Usability Advisory Board member; Rob Mills and Liz Davson, Town of Oakville; Keith Sholes and Louise Farner, Oracle Session ID: CON9123Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: InterContinental - Grand Ballroom B Sessions by the Fusion User Experience Adovcates (FXA) Usability and Features of Oracle Fusion Applications, Built upon Oracle Fusion Middleware Presenters: Debra Lilley, Fujitsu Consulting and Oracle Usability Advisory Board member; John King, King Training ResourcesSession ID: UGF10371Date: Sunday, Sept. 30Time: 11 a.m. - 11:45 a.m. Location: Moscone West – 2010 Ten Things to Love About Oracle Fusion Project Portfolio Management  Presenter: Floyd Teter, EiS TechnologiesSession ID: CON6021Date: Tuesday, Oct. 2Time: 10:15 - 11:15 a.m.Location: Moscone West – 2003

  Read the article

• SQLAuthority News – A Conversation with an Old Friend – Sri Sridharan

  - by pinaldave

  Sri Sridharan is my old friend and we often talk on GTalk. The subject varies from Life in India/USA, movies, musics, and of course SQL. We have our differences when we talk about food or movie but we always agree when we talk about SQL. Yesterday while chatting with him we talked about SQLPASS and the conversation lasted for a long time. Here is the conversation between us on GTalk. I have removed a few of the personal talks and formatted into paragraphs as GTalk often shows stuff out of formatting. Pinal: Sri, Congrats on running for the PASS BoD again. You were so close last year. What made you decide to run again this year? Sri: Thank you Pinal for your leadership in the PASS India Community and all the things you do out there. After coming so close last year, there was no doubt in my mind that I will run again. I was truly humbled by the support I got from the community. Growing up in India for over 25 years, you are brought up in a very competitive part of the world. Right from the pressure of staying in the top of the class from kindergarten to your graduation, the relentless push from your parents about studying and getting good grades (and nothing else matters), you land up essentially living in a pressure cooker. To survive that relentless pressure, you need to have a thick skin, ability to stand up for who you really are , what you want to accomplish and in the process stay true those values. I am striving for a greater cause, to make PASS an organization that can help people with their SQL Server careers, to make PASS relevant to its chapter members, to make PASS an organization that every SQL professional in the world wants to be connected with. Just because I did not get elected or appointed last year does not mean that these causes are not worth fighting. Giving up upon failing the first time is simply not in me. If I did that, what message would I send to those who voted for me? What message would I send to my kids? Pinal: As someone who has such strong roots in India, what can the Indian PASS Community expect from you? Sri: First of all, I think fostering a regional leadership is something PASS must encourage as part of its global growth plan. For PASS global being able to understand all the issues in a region of the world and make sound decisions will be a tough thing to do on a continuous basis. I expect people like you, chapter leaders, regional mentors, MVPs of the region start playing a bigger role in shaping the next generation of PASS. That is something I said in my campaign and I still stand by it. I would like to see growth in the number of chapters in India. The current count does not truly represent the full potential of that region. I was pretty thrilled to see the Bangalore SQLSaturday happen early this year. I would like to see more of SQLSaturday events, at least in the major metro cities. I know the issues in India are very different from the rest of the world. So the formula needs to be tweaked a little for it to work better in India. Once the SQLSaturday model is vetted out, maybe there could be enough justification to have SQLRally India. PASS needs to have a premier SQL event in that region. Going to USA or Europe for that matter is incredibly hard due to VISA issues etc. So this could be a case of where PASS comes closer to where the community is. Pinal: What portfolio would take on if you are elected to the PASS Board? Sri: There are some very strong folks on the PASS Board today. The President discusses the portfolios with the group and makes the final call on the portfolios. I am also a fan of having a team associated with the portfolios. In that case, one person is the primary for a portfolio but secondary on a couple of other portfolios. This way people on the board have a direct vested interest in a few portfolios. Personally, I know I would these portfolios good justice – Chapters, Global Growth and Events (SQLSat, SQLRally). I would try to see if we can get a director to focus on Volunteers.  To me that is very critical for growth in the international regions. Pinal: This is an interesting conversation with you Sri. I know you so long time but this is indeed inspiring to many. India is a big country and we appreciate your thoughts. Sri: Thank you very much for taking time to chat with me today. Cheers. There are pretty strong candidates for SQLPASS Board of Elections this year. I know all of them in person and honestly it is going to be extremely difficult to not to vote for anybody. I am indeed in a crunch right now how to pick one over another. Though the choice is difficult, I encourage you to vote for them. I am extremely confident that the new board of directors will all have the same goal – Better SQL Server Community. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, DBA, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Summit reflections

  - by Rob Farley

  So far, my three PASS Summit experiences have been notably different to each other. My first, I wasn’t on the board and I gave two regular sessions and a Lightning Talk in which I told jokes. My second, I was a board advisor, and I delivered a precon, a spotlight and a Lightning Talk in which I sang. My third (last week), I was a full board director, and I didn’t present at all. Let’s not talk about next year. I’m not sure there are many options left. This year, I noticed that a lot more people recognised me and said hello. I guess that’s potentially because of the singing last year, but could also be because board elections can bring a fair bit of attention, and because of the effort I’ve put in through things like 24HOP... Yeah, ok. It’d be the singing. My approach was very different though. I was watching things through different eyes. I looked for the things that seemed to be working and the things that didn’t. I had staff there again, and was curious to know how their things were working out. I knew a lot more about what was going on behind the scenes to make various things happen, and although very little about the Summit was actually my responsibility (based on not having that portfolio), my perspective had moved considerably. Before the Summit started, Board Members had been given notebooks – an idea Tom (who heads up PASS’ marketing) had come up with after being inspired by seeing Bill walk around with a notebook. The plan was to take notes about feedback we got from people. It was a good thing, and the notebook forms a nice pair with the SQLBits one I got a couple of years ago when I last spoke there. I think one of the biggest impacts of this was that during the first keynote, Bill told everyone present about the notebooks. This set a tone of “we’re listening”, and a number of people were definitely keen to tell us things that would cause us to pull out our notebooks. PASSTV was a new thing this year. Justin, the host, featured on the couch and talked a lot of people about a lot of things, including me (he talked to me about a lot of things, I don’t think he talked to a lot people about me). Reaching people through online methods is something which interests me a lot – it has huge potential, and I love the idea of being able to broadcast to people who are unable to attend in person. I’m keen to see how this medium can be developed over time. People who know me will know that I’m a keen advocate of certification – I've been SQL certified since version 6.5, and have even been involved in creating exams. However, I don’t believe in studying for exams. I think training is worthwhile for learning new skills, but the goal should be on learning those skills, not on passing an exam. Exams should be for proving that the skills are there, not a goal in themselves. The PASS Summit is an excellent place to take exams though, and with an attitude of professional development throughout the event, why not? So I did. I wasn’t expecting to take one, but I was persuaded and took the MCM Knowledge Exam. I hadn’t even looked at the syllabus, but tried it anyway. I was very tired, and even fell asleep at one point during it. I’ll find out my result at some point in the future – the Prometric site just says “Tested” at the moment. As I said, it wasn’t something I was expecting to do, but it was good to have something unexpected during the week. Of course it was good to catch up with old friends and make new ones. I feel like every time I’m in the US I see things develop a bit more, with more and more people knowing who I am, who my staff are, and recognising the LobsterPot brand. I missed being a presenter, but I definitely enjoyed seeing many friends on the list of presenters. I won’t try to list them, because there are so many these days that people might feel sad if I don’t mention them. For those that I managed to see, I was pleased to see that the majority of them have lifted their presentation skills since I last saw them, and I happily told them as much. One person who I will mention was Paul White, who travelled from New Zealand to his first PASS Summit. He gave two sessions (a regular session and a half-day), packed large rooms of people, and had everyone buzzing with enthusiasm. I spoke to him after the event, and he told me that his expectations were blown away. Paul isn’t normally a fan of crowds, and the thought of 4000 people would have been scary. But he told me he had no idea that people would welcome him so well, be so friendly and so down to earth. He’s seen the significance of the SQL Server community, and says he’ll be back. It’ll be good to see him there. Will you be there too?

  Read the article

• Summit reflections

  - by Rob Farley

  So far, my three PASS Summit experiences have been notably different to each other. My first, I wasn’t on the board and I gave two regular sessions and a Lightning Talk in which I told jokes. My second, I was a board advisor, and I delivered a precon, a spotlight and a Lightning Talk in which I sang. My third (last week), I was a full board director, and I didn’t present at all. Let’s not talk about next year. I’m not sure there are many options left. This year, I noticed that a lot more people recognised me and said hello. I guess that’s potentially because of the singing last year, but could also be because board elections can bring a fair bit of attention, and because of the effort I’ve put in through things like 24HOP... Yeah, ok. It’d be the singing. My approach was very different though. I was watching things through different eyes. I looked for the things that seemed to be working and the things that didn’t. I had staff there again, and was curious to know how their things were working out. I knew a lot more about what was going on behind the scenes to make various things happen, and although very little about the Summit was actually my responsibility (based on not having that portfolio), my perspective had moved considerably. Before the Summit started, Board Members had been given notebooks – an idea Tom (who heads up PASS’ marketing) had come up with after being inspired by seeing Bill walk around with a notebook. The plan was to take notes about feedback we got from people. It was a good thing, and the notebook forms a nice pair with the SQLBits one I got a couple of years ago when I last spoke there. I think one of the biggest impacts of this was that during the first keynote, Bill told everyone present about the notebooks. This set a tone of “we’re listening”, and a number of people were definitely keen to tell us things that would cause us to pull out our notebooks. PASSTV was a new thing this year. Justin, the host, featured on the couch and talked a lot of people about a lot of things, including me (he talked to me about a lot of things, I don’t think he talked to a lot people about me). Reaching people through online methods is something which interests me a lot – it has huge potential, and I love the idea of being able to broadcast to people who are unable to attend in person. I’m keen to see how this medium can be developed over time. People who know me will know that I’m a keen advocate of certification – I've been SQL certified since version 6.5, and have even been involved in creating exams. However, I don’t believe in studying for exams. I think training is worthwhile for learning new skills, but the goal should be on learning those skills, not on passing an exam. Exams should be for proving that the skills are there, not a goal in themselves. The PASS Summit is an excellent place to take exams though, and with an attitude of professional development throughout the event, why not? So I did. I wasn’t expecting to take one, but I was persuaded and took the MCM Knowledge Exam. I hadn’t even looked at the syllabus, but tried it anyway. I was very tired, and even fell asleep at one point during it. I’ll find out my result at some point in the future – the Prometric site just says “Tested” at the moment. As I said, it wasn’t something I was expecting to do, but it was good to have something unexpected during the week. Of course it was good to catch up with old friends and make new ones. I feel like every time I’m in the US I see things develop a bit more, with more and more people knowing who I am, who my staff are, and recognising the LobsterPot brand. I missed being a presenter, but I definitely enjoyed seeing many friends on the list of presenters. I won’t try to list them, because there are so many these days that people might feel sad if I don’t mention them. For those that I managed to see, I was pleased to see that the majority of them have lifted their presentation skills since I last saw them, and I happily told them as much. One person who I will mention was Paul White, who travelled from New Zealand to his first PASS Summit. He gave two sessions (a regular session and a half-day), packed large rooms of people, and had everyone buzzing with enthusiasm. I spoke to him after the event, and he told me that his expectations were blown away. Paul isn’t normally a fan of crowds, and the thought of 4000 people would have been scary. But he told me he had no idea that people would welcome him so well, be so friendly and so down to earth. He’s seen the significance of the SQL Server community, and says he’ll be back. It’ll be good to see him there. Will you be there too?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  Hi, I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Problems installing Linux to IDE connected compact flash card

  - by mathematician1975

  I have been trying to install Ubuntu on some hardware (Netcom NC-499 board that contains a Vortex86DX processor). I am trying to install to a compact flash card attached to the board via an IDE adaptor, the aim being that the board will boot up and simply treat the compact flash like a normal hard drive. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it onto the card. I have been trying using a USB CD-ROM drive and the standard .iso image from the ubuntu site (md5 checksum works out fine so no problem there) but I have had no success at all. I have been able to do this with Ubuntu 8.04 but with no other version (9.04 and 10.04 desktop and alternative discs all fail). My question is what other options are available to me to try and install this? I have googled myself apart trying to find out but other than a few sites describing USB based installs using flash memory sticks for very specific hardware, I have found no useful info at all. Any suggestions will be gratefully received.

  Read the article

• S3200SH error 5220 every boot (CMOS/NVRAM Cleared by jumper)

  - by TechAUmNu

  I have a S3200SH Intel server board with a Intel Xeon 3220 Quad Core. Every time I boot it, I get error 5220 (CMOS/NVRAM Cleared by jumper). The jumper is not installed and I have replaced the lithium battery. The board overheated once, although still seems to work fine apart from this error. Also if I leave the board sitting in the bios for a while it sometimes randomly turns off, with all 4 diagnostic LED's red. I have moved the 2GB DIMM to another slot, which seems to have fixed this problem. Any ideas would be greatly appreciated.

  Read the article

• Repair snapped USB flash drive

  - by Richard Slater

  I have a USB Flash Drive that has had the USB connector snapped away from the circuit board. In the past I have had great sucess with soldering the connector back to the circuit board with 4 solid core wires. Unfortunatly this particular device shows up as "Unknown Device" in device manager and displays 0ma power usage. Giving a closer look at the circuit board it appears that the Data + connector has come away from the PCB. Which would explain why it is not recognised. Is there any practicable way of lifting the data from the device? larger version

  Read the article

• Intel PRO/1000 Server NIC on Windows latency. How to measure?

  - by Bobb

  Please note - this question is about latency of the card itself. Not latency of internet or anything else. Thank you for your attention on this matter. It is often said that good server NIC does make difference compared to low grade cards and on-board Ethernet chips. I understand that on-board chip will likely consume CPU time and stand-alone card would use its own chip. Also server card would be faster than low-grade card. Are these 2 facts explaining most of the server cards advantages over on-board and low-grade cards ethernet? How would you measure latency on the card itself? I saw some reports stating some microseconds figures of NIC latency but I dont see how to measure that... Any advise will be appreciated.

  Read the article

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• Sending a file to uCLinux

  - by Mike

  I have a board running uClinux, and I need to send a file to it, but I'm not sure how... I have a RS232 port, and Ethernet port with an IP address at my disposal, I can telnet to the board, but uCLinux doesn't have a built in FTP client. What sort of options do I have here for transferring files from my Windows 7 (or OpenSUSE) machine(s) to this board? EDIT I just found I have a TFTP server on it: # tftp BusyBox v0.60.5 (2012.07.09-14:05+0000) multi-call binary Usage: tftp [OPTION]... HOST [PORT] But I can't find any good information on how to use TFTP. And looking around google I'm seeing it's good for loading binary images, so I'm assume anything could be sent, but I'm not sure.

  Read the article

• Intermittent graphics issue

  - by Rob

  An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

  Read the article

• What is a good listserv replacement?

  - by David Smith

  A board I'm on has about 700 - 1300 members being served from a listserv maintained by a company one of our board members is on. This restricts the ability of other board members to use the listserv unless they are employees of the company. They want to move to a system where anyone can administer the list. I'm thinking of switching to Constant Contact or Google Groups. We want something that allows list members to manage their own contact preferences and enables anyone authorized to send emails to the list.

  Read the article

• Should I bother upgrading my Opteron 270 Server?

  - by MousePad

  I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Representing game states in Tic Tac Toe

  - by dacman

  The goal of the assignment that I'm currently working on for my Data Structures class is to create a of Quantum Tic Tac Toe with an AI that plays to win. Currently, I'm having a bit of trouble finding the most efficient way to represent states. Overview of current Structure: AbstractGame Has and manages AbstractPlayers (game.nextPlayer() returns next player by int ID) Has and intializes AbstractBoard at the beginning of the game Has a GameTree (Complete if called in initialization, incomplete otherwise) AbstractBoard Has a State, a Dimension, and a Parent Game Is a mediator between Player and State, (Translates States from collections of rows to a Point representation Is a StateConsumer AbstractPlayer Is a State Producer Has a ConcreteEvaluationStrategy to evaluate the current board StateTransveralPool Precomputes possible transversals of "3-states". Stores them in a HashMap, where the Set contains nextStates for a given "3-state" State Contains 3 Sets -- a Set of X-Moves, O-Moves, and the Board Each Integer in the set is a Row. These Integer values can be used to get the next row-state from the StateTransversalPool SO, the principle is Each row can be represented by the binary numbers 000-111, where 0 implies an open space and 1 implies a closed space. So, for an incomplete TTT board: From the Set<Integer> board perspective: X_X R1 might be: 101 OO_ R2 might be: 110 X_X R3 might be: 101, where 1 is an open space, and 0 is a closed space From the Set<Integer> xMoves perspective: X_X R1 might be: 101 OO_ R2 might be: 000 X_X R3 might be: 101, where 1 is an X and 0 is not From the Set<Integer> oMoves perspective: X_X R1 might be: 000 OO_ R2 might be: 110 X_X R3 might be: 000, where 1 is an O and 0 is not Then we see that x{R1,R2,R3} & o{R1,R2,R3} = board{R1,R2,R3} The problem is quickly generating next states for the GameTree. If I have player Max (x) with board{R1,R2,R3}, then getting the next row-states for R1, R2, and R3 is simple.. Set<Integer> R1nextStates = StateTransversalPool.get(R1); The problem is that I have to combine each one of those states with R1 and R2. Is there a better data structure besides Set that I could use? Is there a more efficient approach in general? I've also found Point<-State mediation cumbersome. Is there another approach that I could try there? Thanks! Here is the code for my ConcretePlayer class. It might help explain how players produce new states via moves, using the StateProducer (which might need to become StateFactory or StateBuilder). public class ConcretePlayerGeneric extends AbstractPlayer { @Override public BinaryState makeMove() { // Given a move and the current state, produce a new state Point playerMove = super.strategy.evaluate(this); BinaryState currentState = super.getInGame().getBoard().getState(); return StateProducer.getState(this, playerMove, currentState); } } EDIT: I'm starting with normal TTT and moving to Quantum TTT. Given the framework, it should be as simple as creating several new Concrete classes and tweaking some things.

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe driver tg3 will not install?

  - by Pete

  aries@aries-laptop:~$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device aries@aries-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7800] (rev 40) 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:16.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:16.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) 01:00.1 SD Host controller [0805]: Broadcom Corporation Device [14e4:16bc] (rev 10) 01:00.2 System peripheral [0880]: Broadcom Corporation Device [14e4:16be] (rev 10) 01:00.3 System peripheral [0880]: Broadcom Corporation Device [14e4:16bf] (rev 10) 02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4358]

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Learning to code first game, few questions on basic game development and 3D

  - by ProgrammerByDay

  I've been programming for a while, and I'm concurrently learning how to make a basic game and slimdx, and wanted to talk to someone to hopefully get a few pointers. I've read that Tetris is the "Hello, world" of game programming, which made sense to me, so I decided to give it a shot. I've been able to code up a basic version in a few hours, which I'm quite happy with, but I had a few questions about 3D programming. Right now I'm using Direct3D to do display the blocks without any textures (just colored squares). I have a data structure (2d array of bytes, where each byte denotes the presence of a block and its color) which is the "game board," and on every render() call I create a new vertex buffer of the existing squares in the game board, and draw those primitives. This feels very inefficient, and I wondering what would be the idiomatic way of doing this in a 3D world, with matrix/rotations/translation operations. I know 3D is overkill for such a project, but I want to learn any 3d concepts that I can while I'm doing it. I understand that what you'd usually want to do is keep the same vertices/vertex buffers but manipulate them with matrices to achieve rotations/translations, etc. To do so, I assume what would happen is I'd have one vertex buffer for the "active" piece, since that'll be constantly rotated and moved, and have one vertex buffer for the frozen pieces on the bottom of the board, which is pretty much stationary, but will need to be changed/recreated when the active piece becomes frozen. Right now I'm just clearing and redrawing on every render call, which seems like the easiest way to do things, although I wonder if there's a more efficient way to deal with changes. Obviously there are a lot of questions I'm asking here, but if you can even just point me a step or two ahead in terms of how I should be thinking, it'd be great. Thanks

  Read the article

• How to partition Seagate FreeAgent GoFlex 2TB hard disk?

  - by balki

  Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• how to save and load the state of a game in scheme

  - by user3667664

  I'm creating the game of chess in scheme, but do not know how to save and load game state is a part I have this code (define-struct ficha(color se-movio? tipo-ficha )) ;;tablero lista de listas de fichas (define-struct estado (tablero turno fichaSel)) (define bpawn (bitmap "b-peon.png")) (define brook (bitmap "b-torre.png")) (define bcaballo (bitmap "b-caballo.png")) (define bbish (bitmap "b-arfil.png")) (define bquee (bitmap "b-reina.png")) (define bking (bitmap "b-rey.png")) (define wpawn (bitmap "w-peon.png")) (define wrook (bitmap "w-torre.png")) (define wcaballo (bitmap "w-caballo.png")) (define wbish (bitmap "w-arfil.png")) (define wquee (bitmap "w-reina.png")) (define wking (bitmap "w-rey.png")) (define board (bitmap "board.jpg")) This is the board that is a list of lists (define tableroini (list (list torreb caballob arfilb reinab reyb arfilb caballob torreb) (list peonb peonb peonb peonb peonb peonb peonb peonb) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list peonw peonw peonw peonw peonw peonw peonw peonw) (list torrew caballow arfilw reinaw reyw arfilw caballow torrew))) I did this to save the state of the game: (define (Guardar-en-archivo archivo) (write-file (string-append Subcarpeta archivo ".txt") "game state" )) But not as you insert the game state on "game state" for me to save the game How I can do this ?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >