Search Results

Search found 5501 results on 221 pages for 'receive'.

Page 15/221 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • BizTalk Schema Validation

    - by Christopher House
    Perhaps this one should be filed under:  Obvious Yesterday I created a new schema that is going to be used for a WCF receive.  The schema has a bunch of restrictions in it, with the intention that we'd validate incoming messages against the schema.  I'd never done message validation with BizTalk but I knew the XmlDisassembler component had an option for validating, so I figured it would be a piece of cake.  Sadly, that was not to be the case.  I deployed my artifacts and configured my receive location's XmlDisassembler with what I thought to be the correct document spec name.  I entered My.Project.Name.SchemaTypeName for the document spec and started running unit tests.  All of them failed with the following error logged in the event log: "WcfReceivePort_BizTalkWcfService/PurchaseOrderService" URI: "/BizTalkWcfService/PurchaseOrderService.svc" Reason: No Disassemble stage components can recognize the data. I went to the receive port and turned on tracking, submitted another message, then went to the admin console and saved the message.  It looked correct, but just to be sure, I manually validated it against the schema in my project.  As expected, it validated correctly. After a bit of thinking on this, I realized that I probably needed to fully qualify my document spec name, meaning, include the assembly name, as well as the type name.  So, I went back to the receive location and changed the document spec to: My.Project.Name.SchemaTypeName, My.Project.Name,Version=1.0.0.0, Culture=neutral, PublicKeyToken=xxxxxxxxx I re-ran my unit tests and everything was working as expected.  So, note to self:  remember to include the assembly name when setting the document spec.  If you need an easy way to determine your schema name and assembly name, find your schema in the admin console and go to it's properties.  On the property screen, look at the Name and Assembly properties.  Your document spec will be "SchemaName, AssemblyName"

    Read the article

  • How TiVo is messing up customer support.

    - by James Fleming
    Ok,  So I've gotten a TiVo and overall, I'm happy, but there have been issues and I suspect I've a defective unit. - Now the nice folks after many service calls were happy to swap it out, and to ensure continuity of service, they sent me a new unit (after a $109 deposit).  That was yesterday. Today, when we go to watch a little TV, and wait for our replacement unit to arrive we find our TiVo service has been suspended. WTF? They have an exchange program, but your unit your waiting to exchange is as dead as a doornail until the replacement arrives. How hard is it to keep the old unit active for an extra week? Here is the exchange w/Tivo below... You are currently number 1 in the queue. We apologize for the delay. We will assign you to an agent as soon as one is available.The average amount of time a customer has to wait is 00:13.  Kaylene (Listening)  Kaylene: Thank you for contacting TiVo! My name is Kaylene. So that I may better assist you, are you an existing customer?  james Fleming: yes I am, but I'm now having second thoughts about being one    Kaylene: Thank you for verifying your information. How may I assist you today James?  james Fleming: I've been having issues w/a tivo box & I'm getting a replacement sent out to me (after paying an additional deposit) and now my current unit is no longer activated  Kaylene: I can help you today!  Kaylene: When we process an exchange we do transfer over the service to the replacement box so it is active and ready to go when you receive it.  james Fleming: which is to say you also make my current box worthless until such time I receive a new box?!?!?  Kaylene: I apologize that your original box was deactivated so we could activate your replacement box.  james Fleming: Why on Earth would I bother to pay in advance for a new box if you were going to kill my existing box.  Kaylene: What features are you needing to use on your current box?  james Fleming: I need to be able to access my netflix subscription (if I'm lucky enough to have it work without rebooting)  Kaylene: Can I have you verify the TiVo Service Number of your TiVo box please?  james Fleming: 7460011906979b4  Kaylene: We have your current box temporary service but not all features are available with temporary service as it is not paid for service.  Kaylene: If you like I can transfer your service back to your current box for now. Then once you receive the new box you will have to call in and have the service transferred back to the new box.  james Fleming: Not paid for? Let's see> one tivo box + 3 year service plan + monthly service + $109 deposit on a second box = what?  Kaylene: Would you like me to transfer your service back to your current box?  james Fleming: Yes - that would be helpful  Kaylene: All you will need to do is contact us again once you receive the new box so we can transfer it back.  Kaylene: I have put your service back on TiVo box 7460011906979b4.  james Fleming: What would also be helpful is your firm informing me to how you'd be cutting service in the interim.  james Fleming: Again - I opted to pay to have a second box delivered BEFORE returning the box I have - thus trying to have a continuity of service..  Kaylene: This is not something we normally do so it is important when you contact us to transfer the service back to the new box when you receive it that you reference this case number: 110622-006089.  Kaylene: I apologize about the inconvenience. You may need  force a few connections for the box to recognize the service again.  james Fleming: If it's not something you normally do than WHY would you have a $109 fee and a term for the service.  james Fleming: I am not mad at you, but your company is not impressing me and I'm blogging about this experience  Kaylene: Again I apologize about the inconvenience but you should be good to go now. Is there anything else I can help you with today?  james Fleming: so I need to go through the re-actviate process or is that somethign you do  Kaylene: When you receive the new TiVo box you need to contact us so we can transfer the service to the new box for you.  james Fleming: sure  Kaylene: Is there anything else I can help you with today James?  james Fleming: Nope - please email this transcript to me  Kaylene: I apologize but we do not have the ability to e-mail you a copy of this transcript. You can view it online at  http://www.tivo.com when you sign into your account or you can copy and paste it now to save it.  Kaylene: Thank you for contacting TiVo today. Your reference number for our conversation is 110622-006089. You can save this for your records, and if necessary, provide this to a later agent to pull up what we discussed. There will be a brief satisfaction survey emailed to you. We would appreciate any feedback on your TiVo Chat Support experience today.  Kaylene: Thank you for using TiVo Chat and have a great day James! Good-bye.  Kaylene has disconnected.

    Read the article

  • manage spam and catchalls on google apps?

    - by acidzombie24
    I use google apps as my email system for my website. I have a catch all which fowards mail to some_account which forwards mail to my peronal account bc its rare to receive mail on my sites. Problem is emails that are caught by the catch all ALWAYS goes to junk. Junk emails are never forwarded so i dont receive them in my main gmail account thus i dont receive emails sent to the wrong [email protected]. So i wrote a filter that on my catch_all_user to never send to spam, which worked as i get those emails. But on my main account those emails dont show up as spam/junk. How do i get it forwarding but still marked as spam so its in its own junk folder instead of mixed up in my real mail?

    Read the article

  • ASP -response-flush-flushes-partial-data

    - by Anshu
    I am developing a web app with an ASP server side and I use an iframe for data push. An ASP handler flushes every once in a while some javascript to the iframe: context.Response.Write("<script language='javascript'>top.update('lala');</script>"); context.Response.Flush(); My problem is that sometimes, when I receive the data, I don't get the full text. For example I will receive this : update('lala'); One workaround I have is to have a thread flushing '..........' every 500ms. (Then I will receive script...... which will complete my javascript.) However I am sure there must be a way to have Response.Flush() sending the whole chunk of data. Does someone have an idea on how to use properly Response.Flush() ? Thank you!

    Read the article

  • Do I have to bind an UDP socket in my client program, to receive data? (I always get WASEINVAL)...

    - by Incubbus
    Hey There, I have the following problem: I am starting WSA, then I am creating a UDP socket (AF_INET, SOCK_DGRAM, IPPROTO_UDP) and try to recvfrom on this socket, but it always returns -1 and I get WSAEINVAL (10022)... I don´t know why?... When I bind the port, that does not happen... But it is very lame to bind the clients socket... (As far as I remember, i never had this problem before:/ )... Anyone knows why this happens?... (I am sending data to my server, which anwsers[ or at least, tries to^^])... Inc::STATS CConnection::_RecvData(sockaddr* addr, std::string &strData) { int ret, len, fromlen; //return code / length of the data / sizeof(sockaddr) char *buffer; //will hold the data char c; //recv length of the message fromlen = sizeof(sockaddr); ret = recvfrom(m_InSock, &c, 1, 0, addr, &fromlen); if(ret != 1) { #ifdef __MYDEBUG__ std::stringstream ss; ss << WSAGetLastError(); MessageBox(NULL, ss.str().c_str(), "", MB_ICONERROR | MB_OK); #endif return Inc::ERECV; }...

    Read the article

  • Creating typed WSDL’s for generic WCF services of the ESB Toolkit

    - by charlie.mott
    source: http://geekswithblogs.net/charliemott Question How do you make it easy for client systems to consume the generic WCF services exposed by the ESB Toolkit using messages that conform to agreed schemas\contracts?  Usually the developer of a system consuming a web service adds a service reference using a WSDL. However, the WSDL’s for the generic services exposed by the ESB Toolkit do not make it easy to develop clients that conform to agreed schemas\contracts. Recommendation Take a copy of the generic WSDL’s and modify it to use the proper contracts. This is very easy.  It will work with the generic on ramps so long as the <part>?</part> wrapping is removed from the WCF adapter configuration in the BizTalk receive locations.  Attempting to create a WSDL where the input and output messages are sent/returned with a <part> wrapper is a nightmare.  I have not managed it.  Consequences I can only see the following consequences of removing the <part> wrapper: ESB Test Client – I needed to modify the out-of-the-box ESB Test Client source code to make it send non-wrapped messages.  Flat file formatted messages – the endpoint will no longer support flat file message formats.  However, even if you needed to support this integration pattern through WCF, you would most-likely want to create a separate receive location anyway with its’ own independently configured XML disassembler pipeline component. Instructions These steps show how to implement a request-response implementation of this. WCF Receive Locations In BizTalk, for the WCF receive location for the ESB on-ramp, set the adapter Message settings\bindings to “UseBodyPath”: Inbound BizTalk message body  = Body Outbound WCF message body = Body Create a WSDL’s for each supported integration use-case Save a copy of the WSDL for the WCF generic receive location above that you intend the client system to use. Give it a name that mirrors the interface agreement (e.g. Esb_SuppliersSearchCommand_wsHttpBinding.wsdl).   Add any xsd schemas files imported below to this same folder.   Edit the WSDL to import schemas For example, this: <xsd:schema targetNamespace=http://microsoft.practices.esb/Imports /> … would become something like: <xsd:schema targetNamespace="http://microsoft.practices.esb/Imports">     <xsd:import schemaLocation="SupplierSearchCommand_V1.xsd"                            namespace="http://schemas.acme.co.uk/suppliersearchcommand/1.0"/>     <xsd:import  schemaLocation="SuppliersDocument_V1.xsd"                              namespace="http://schemas.acme.co.uk/suppliersdocument/1.0"/>     <xsd:import schemaLocation="Types\Supplier_V1.xsd"                              namespace="http://schemas.acme.co.uk/types/supplier/1.0"/>     <xsd:import  schemaLocation="GovTalk\bs7666-v2-0.xsd"                               namespace="http://www.govtalk.gov.uk/people/bs7666"/>     <xsd:import  schemaLocation="GovTalk\CommonSimpleTypes-v1-3.xsd"                             namespace="http://www.govtalk.gov.uk/core"/>     <xsd:import  schemaLocation="GovTalk\AddressTypes-v2-0.xsd"                              namespace="http://www.govtalk.gov.uk/people/AddressAndPersonalDetails"/> </xsd:schema> Modify the Input and Output message For example, this: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> … would become something like: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part"                       element="ssc:SupplierSearchEvent"                         xmlns:ssc="http://schemas.acme.co.uk/suppliersearchcommand/1.0" /> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part"                       element="sd:SuppliersDocument"                       xmlns:sd="http://schemas.acme.co.uk/suppliersdocument/1.0"/> </wsdl:message> This WSDL can now be added as a service reference in client solutions.

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • Ubuntu 12.10 no network and no graphics

    - by khasiKoMasu
    I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

    Read the article

  • Biztalk Server 2009 - Failover Clustering and Network Load Balancing (NLB)

    - by FullOfQuestions
    Hi, We are planning a Biztalk 2009 set up in which we have 2 Biztalk Application Servers and 2 DB Servers (DB servers being in an Active/Passive Cluster). All servers are running Windows Server 2008 R2. As part of our application, we will have incoming traffic via the MSMQ, FILE and SOAP adapters. We also have a requirement for High-availability and Load-balancing. Let's say I create two different Biztalk Hosts and assign the FILE receive handler to the first one and the MSMQ receive handler to the second one. I now create two host instances for each of the two hosts (i.e. one for each of my two physical servers). After reviewing the Biztalk Documentation, this is what I know so far: For FILE (Receive), high-availablity and load-balancing will be achieved by Biztalk automatically because I set up a host instance on each of the two servers in the group. MSMQ (Receive) requires Biztalk Host Clustering to ensure high-availability (Host Clustering however requires Windows Failover Clustering to be set up as well). No loading-balancing option is clear here. SOAP (Receive) requires NLB to achieve Load-balancing and High-availability (if one server goes down, NLB will direct traffic to the other). This is where I'm completely puzzled and I desperately need your help: Is it possible to have a Windows Failover Cluster and NLB set up at the same time on the two application servers? If yes, then please tell me how. If no, then please explain to me how anyone is acheiving high-availability and load-balancing for MSMQ and SOAP when their underlying prerequisites are mutually exclusive! Your help is greatly appreciated, M

    Read the article

  • Scanning notification through WIA

    - by Przemek
    I've registered to receive WIA notifications for all devices through RegisterEventCallbackInterface for WIA_EVENT_DEVICE_CONNECTED and WIA_EVENT_SCAN_IMAGE events. However I only receive notifications when scanner device is plugged in - I don't receive notification when I scan (for example with mspaint which uses WIA). Am I supposed to receive scanning notifications from applications or only when Scan button is pressed on a device? (I haven't tried the latter since I use a multifunction printer without Scan button). Is there any other way to be notified about successful scans through WIA? Thank you.

    Read the article

  • Telnet connection using c#

    - by alejandrobog
    Our office currently uses telnet to query an external server. The procedure is something like this. Connect - telnet opent 128........ 25000 Query - we paste the query and then hit alt + 019 Response - We receive the response as text in the telnet window So I’m trying to make this queries automatic using a c# app. My code is the following First the connection. (No exceptions) SocketClient = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); String szIPSelected = txtIPAddress.Text; String szPort = txtPort.Text; int alPort = System.Convert.ToInt16(szPort, 10); System.Net.IPAddress remoteIPAddress = System.Net.IPAddress.Parse(szIPSelected); System.Net.IPEndPoint remoteEndPoint = new System.Net.IPEndPoint(remoteIPAddress, alPort); SocketClient.Connect(remoteEndPoint); Then I send the query (No exceptions) string data ="some query"; byte[] byData = System.Text.Encoding.ASCII.GetBytes(data); SocketClient.Send(byData); Then I try to receive the response byte[] buffer = new byte[10]; Receive(SocketClient, buffer, 0, buffer.Length, 10000); string str = Encoding.ASCII.GetString(buffer, 0, buffer.Length); txtDataRx.Text = str; public static void Receive(Socket socket, byte[] buffer, int offset, int size, int timeout) { int startTickCount = Environment.TickCount; int received = 0; // how many bytes is already received do { if (Environment.TickCount > startTickCount + timeout) throw new Exception("Timeout."); try { received += socket.Receive(buffer, offset + received, size - received, SocketFlags.None); } catch (SocketException ex) { if (ex.SocketErrorCode == SocketError.WouldBlock || ex.SocketErrorCode == SocketError.IOPending || ex.SocketErrorCode == SocketError.NoBufferSpaceAvailable) { // socket buffer is probably empty, wait and try again Thread.Sleep(30); } else throw ex; // any serious error occurr } } while (received < size); } Every time I try to receive the response I get "an exsiting connetion has forcibly closed by the remote host" if open telnet and send the same query I get a response right away Any ideas, or suggestions?

    Read the article

  • BizTalk Flat File Failed Message Routing

    - by alram
    I have found some broken threads across the web where people claim to be able to use receive shapes in an orchestration with XLANGMessage types to receive flat file schema files that could not be assembled into a specific xsd. I've attempted to set the messagetype in the receive shape as Microsoft.XLANGS.BaseTypes.XLANGMessage, but this basetype is not serializable. This then causes a build error. Is there an object type that can capture both XmlDocuments of well formed xml messages as well as malformed xml and non-assembled flat files?

    Read the article

  • How to set ReceiveBufferSize for UDPClient? or Does it make sense to set? C#

    - by Jack
    Hello all. I am implementing a UDP data transfer thing. I have several questions about UDP buffer. I am using UDPClient to do the UDP send / receive. and my broadband bandwidth is 150KB/s (bytes/s, not bps). I send out a 500B datagram out to 27 hosts 27 hosts send back 10KB datagram back if they receive. So, I should receive 27 responses, right? however, I only get averagely 8 - 12 instead. I then tried to reduce the size of the response down to 500B, yes, I receive all. A thought of mine is that if all 27 hosts send back 10KB response at almost same time, the incoming traffic will be 270KB/s (likely), that exceeds my incoming bandwidth so loss happens. Am I right? But I think even if the incoming traffic exceeds the bandwidth, is the Windows supposed to put the datagram in the buffer and wait for receive? I then suspect that maybe the ReceiveBufferSize of my UdpClient is too small? by default, it is 8092B?? I don't know whether I am all right at these points. Please give me some help.

    Read the article

  • Building a webserver, client doesn't acknowledge HTTP 200 OK frame.

    - by Evert
    Hi there, I'm building my own webserver based on a tutorial. I have found a simple way to initiate a TCP connection and send one segment of http data (the webserver will run on a microcontroller, so it will be very small) Anyway, the following is the sequence I need to go through: receive SYN send SYN,ACK receive ACK (the connection is now established) receive ACK with HTTP GET command send ACK send FIN,ACK with HTTP data (e.g 200 OK) receive FIN,ACK <- I don't recieve this packet! send ACK Everything works fine until I send my acknowledgement and HTTP 200 OK message. The client won't send an acknowledgement to those two packages and thus no webpage is being displayed. I've added a pcap file of the sequence how I recorded it with wireshark. Pcap file: http://cl.ly/5f5 (now it's the right data) All sequence and acknowledgement numbers are correct, checksum are ok. Flags are also right. I have no idea what is going wrong.

    Read the article

  • send email notifications to entrants of my contest form using php

    - by Zeljko Radic
    I am really stuck with the following issue and your assistance would be appreciated. Here is the deal. I have a contest form at http://www.beogradstore.com/mn/contest/main-contest/. Btw, I use WordPress contest domination plugin. So I want entrants of the contest to receive email notifications whenever they receive reward entries. After they enter the contest, they will receive referral link, which they can share online and whenever someone enters the contest with that referral link, the owner of the referral link will receive 10 new contest entries. What would be the easiest way to accomplish this?

    Read the article

  • Bluetooth in Java Mobile: Handling connections that go out of range

    - by Albus Dumbledore
    I am trying to implement a server-client connection over the spp. After initializing the server, I start a thread that first listens for clients and then receives data from them. It looks like that: public final void run() { while (alive) { try { /* * Await client connection */ System.out.println("Awaiting client connection..."); client = server.acceptAndOpen(); /* * Start receiving data */ int read; byte[] buffer = new byte[128]; DataInputStream receive = client.openDataInputStream(); try { while ((read = receive.read(buffer)) > 0) { System.out.println("[Recieved]: " + new String(buffer, 0, read)); if (!alive) { return; } } } finally { System.out.println("Closing connection..."); receive.close(); } } catch (IOException e){ e.printStackTrace(); } } } It's working fine for I am able to receive messages. What's troubling me is how would the thread eventually die when a device goes out of range? Firstly, the call to receive.read(buffer) blocks so that the thread waits until it receives any data. If the device goes out of range, it would never proceed onward to check if meanwhile it has been interrupted. Secondly, it would never close the connection, i.e. the server would not accept the device once it goes back in range. Thanks! Any ideas would be highly appreciated! Merry Christmas!

    Read the article

  • KeyError this says that key(partner) is not in dict ?

    - by Ansh Jain
    I am trying to make an chat application using python and django. I almost complete it and its working fine for 8-10 minutes when two persons are chatting after that certain time it shows an error. here is the traceback : - Traceback (most recent call last): File "\Django_chat\django_chat\chat\views.py", line 55, in receive message = chatSession.getMessage(request.session['partner'],request.session['uid'],afterTime) File "C:\Python26\lib\site-packages\django\contrib\sessions\backends\base.py", line 47, in __getitem__ return self._session[key] KeyError: 'partner' here is the receive module :- def receive(request): message received by this user chatSession = chat() data = request.POST afterTime = data['lastMsgTime'] try: message = chatSession.getMessage(request.session['partner'],request.session['uid'],afterTime) except: #partnerId = virtual_users.objects.get(id=request.session['uid']).partner print('there is an error in receive request') traceback.print_exc(file=open("/myapp.log","a")) msg = serializers.serialize("json", message) return HttpResponse(msg) Please Help me :( thanks Ansh J

    Read the article

  • Camera Stream in Flash Problem

    - by Peter
    Please help me fill the question marks. I want to get a feed from my camera and to pass it to the receive function. Also in flash builder(in design mode) how do I put elements so they can play a camera feed?? Because as it seems VideoDisplay just doesn't work public function receive(???:???):void{ //othercam is a graphic element(VideoDisplay) othercam.??? = ????; } private function send():void{ var mycam:Camera = Camera.getCamera(); //mycam2.attachCamera(mycam); //sendstr is a stream we send sendstr.attachCamera(mycam); //we pass mycam into receive sendstr.send("receive",mycam); }

    Read the article

  • odd response after INVITE request, SIP

    - by supersk
    After sending an invite request i receive a trying answer, and immidietly after that i receive error 407 proxy authentication required. After sending ack & another invite with the proxy header i receive session progress about 1/4 of the time!! other times it just sends 407 error again & again. Any ideas?

    Read the article

  • How To Activate Your Free Office 2007 to 2010 Tech Guarantee Upgrade

    - by Matthew Guay
    Have you purchased Office 2007 since March 5th, 2010?  If so, here’s how you can activate and download your free upgrade to Office 2010! Microsoft Office 2010 has just been released, and today you can purchase upgrades from most retail stores or directly from Microsoft via download.  But if you’ve purchased a new copy of Office 2007 or a new computer that came with Office 2007 since March 5th, 2010, then you’re entitled to an absolutely free upgrade to Office 2010.  You’ll need enter information about your Office 2007 and then download the upgrade, so we’ll step you through the process. Getting Started First, if you’ve recently purchased Office 2007 but haven’t installed it, you’ll need to go ahead and install it before you can get your free Office 2010 upgrade.  Install it as normal.   Once Office 2007 is installed, run any of the Office programs.  You’ll be prompted to activate Office.  Make sure you’re connected to the internet, and then click Next to activate. Get your Free Upgrade to Office 2010 Now you’re ready to download your upgrade to Office 2010.  Head to the Office Tech Guarantee site (link below), and click Upgrade now. You’ll need to enter some information about your Office 2007.  Check that you purchased your copy of Office 2007 after March 5th, select your computer manufacturer, and check that you agree to the terms. Now you’re going to need the Product ID number from Office 2007.  To find this, open Word or any other Office 2007 application.  Click the Office Orb, and select Options on the bottom. Select the Resources button on the left, and then click About. Near the bottom of this dialog, you’ll see your Product ID.  This should be a number like: 12345-123-1234567-12345   Go back to the Office Tech Guarantee signup page in your browser, and enter this Product ID.  Select the language of your edition of Office 2007, enter the verification code, and then click Submit. It may take a few moments to validate your Product ID. When it is finished, you’ll be taken to an order page that shows the edition of Office 2010 you’re eligible to receive.  The upgrade download is free, but if you’d like to purchase a backup DVD of Office 2010, you can add it to your order for $13.99.  Otherwise, simply click Continue to accept. Do note that the edition of Office 2010 you receive may be different that the edition of Office 2007 you purchased, as the number of editions has been streamlined in the Office 2010 release.  Here’s a chart you can check to see what edition you’ll receive.  Note that you’ll still be allowed to install Office on the same number of computers; for example, Office 2007 Home and Student allows you to install it on up to 3 computers in the same house, and your Office 2010 upgrade will allow the same. Office 2007 Edition Office 2010 Upgrade You’ll Receive Office 2007 Home and Student Office Home and Student 2010 Office Basic 2007Office Standard 2007 Office Home and Business 2010 Office Small Business 2007Office Professional 2007Office Ultimate 2007 Office Professional 2010 Office Professional 2007 AcademicOffice Ultimate 2007 Academic Office Professional Academic 2010 Sign in with your Windows Live ID, or create a new one if you don’t already have one. Enter your name, select your country, and click Create My Account.  Note that Office will send Office 2010 tips to your email address; if you don’t wish to receive them, you can unsubscribe from the emails later.   Finally, you’re ready to download Office 2010!  Click the Download Now link to start downloading Office 2010.  Your Product Key will appear directly above the Download link, so you can copy it and then paste it in the installer when your download is finished.  You will additionally receive an email with the download links and product key, so if your download fails you can always restart it from that link. If your edition of Office 2007 included the Office Business Contact Manager, you will be able to download it from the second Download link.  And, of course, even if you didn’t order a backup DVD, you can always burn the installers to a DVD for a backup.   Install Office 2010 Once you’re finished downloading Office 2010, run the installer to get it installed on your computer.  Enter your Product Key from the Tech Guarantee website as above, and click Continue. Accept the license agreement, and then click Upgrade to upgrade to the latest version of Office.   The installer will remove all of your Office 2007 applications, and then install their 2010 counterparts.  If you wish to keep some of your Office 2007 applications instead, click Customize and then select to either keep all previous versions or simply keep specific applications. By default, Office 2010 will try to activate online automatically.  If it doesn’t activate during the install, you’ll need to activate it when you first run any of the Office 2010 apps.   Conclusion The Tech Guarantee makes it easy to get the latest version of Office if you recently purchased Office 2007.  The Tech Guarantee program is open through the end of September, so make sure to grab your upgrade during this time.  Actually, if you find a great deal on Office 2007 from a major retailer between now and then, you could also take advantage of this program to get Office 2010 cheaper. And if you need help getting started with Office 2010, check out our articles that can help you get situated in your new version of Office! Link Activate and Download Your free Office 2010 Tech Guarantee Upgrade Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideCenter Pictures and Other Objects in Office 2007 & 2010Change the Default Color Scheme in Office 2010Show Two Time Zones in Your Outlook 2007 Calendar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

    Read the article

  • Send email from postfix server to outside email client

    - by Russ
    I have set up an email server and can send/receive email localhost and I can receive mail from outside sources but I cannot send emails to outside sources. I get this error when I try to send to an outside source such as live.com or gmail.com: Nov 8 22:15:13 server2 postfix/smtp[7598]: 699D480A64: to=, relay=none, delay=122043, delays=122022/0.01/20/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=live.com type=MX: Host not found, try again) Any ideas where I could look to resolve this?

    Read the article

  • I am receiving a message saying I have duplicate sources but I can't seem to find a duplicate of the line described, any ideas?

    - by David Griffiths
    I receive this meassage when I run sudo apt-get update in the terminal:- Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) So i ran the command gksu gedit /etc/apt/sources.list and checked the source to find there was no duplicate, not that I can see anyway. Here is the source:- # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release i386 (20120423)]/ precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise restricted main multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise universe deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise multiverse deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security restricted main multiverse universe #Added by software-properties deb http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu precise main # deb-src http://extras.ubuntu.com/ubuntu precise main deb http://repository.spotify.com stable non-free I can see there are two lines of deb http://archive.canonical.com/ubuntu precise partner but one has #deb-src at the beginning of it. Hashed out no? I'm quite new to linux OS and have little to none sourced editing skills so any help would be most appreciated. Thank you:)

    Read the article

  • BizTalk: Internals: the Partner Direct Ports and the Orchestration Chains

    - by Leonid Ganeline
    Partner Direct Port is one of the BizTalk hidden gems. It opens simple ways to the several messaging patterns. This article based on the Kevin Lam’s blog article. The article is pretty detailed but it still leaves several unclear pieces. So I have created a sample and will show how it works from different perspectives. Requirements We should create an orchestration chain where the messages should be routed from the first stage to the second stage. The messages should not be modified. All messages has the same message type. Common artifacts Source code can be downloaded here. It is interesting but all orchestrations use only one port type. It is possible because all ports are one-way ports and use only one operation. I have added a B orchestration. It helps to test the sample, showing all test messages in channel. The Receive shape Filter is empty. A Receive Port (R_Shema1Direct) is a plain Direct Port. As you can see, a subscription expression of this direct port has only one part, the MessageType for our test schema: A Filer is empty but, as you know, a link from the Receive shape to the Port creates this MessageType expression. I use only one Physical Receive File port to send a message to all processes. Each orchestration outputs a Trace.WriteLine(“<Orchestration Name>”). Forward Binding This sample has three orchestrations: A_1, A_21 and A_22. A_1 is a sender, A_21 and A_22 are receivers. Here is a subscription of the A_1 orchestration: It has two parts A MessageType. The same was for the B orchestration. A ReceivePortID. There was no such parameter for the B orchestration. It was created because I have bound the orchestration port with Physical Receive File port. This binding means the PortID parameter is added to the subscription. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for the sending orchestration, A_1. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, receive orchestrations, A_21 or A_22, but it is A_1 orchestration and S_SentFromA_1 port. Now we have to choose a Partner Orchestration parameter for the received orchestrations, A_21 and A_22. Nothing strange is here except a parameter name. We choose the port of the sender, A_1 orchestration and S_SentFromA_1 port. As you can see the Partner Orchestration parameter for the sender and receiver orchestrations is the same. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B and by A_1 A_1 sent a message forward. A message was received by B, A_21, A_22 Let’s look at a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports.     Now let’s see a subscription of the A_21 and A_22 orchestrations. Now it makes sense. That’s why we have chosen such a strange value for the Partner Orchestration parameter of the sending orchestration. Inverse Binding This sample has three orchestrations: A_11, A_12 and A_2. A_11 and A_12 are senders, A_2 is receiver. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for a receiving orchestration, A_2. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, sent orchestrations, A_11 or A_12, but it is A_2 orchestration and R_SentToA_2 port. Now we have to choose a Partner Orchestration parameter for the sending orchestrations, A_11 and A_12. Nothing strange is here except a parameter name. We choose the port of the sender, A_2 orchestration and R_SentToA_2 port. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B, A_11 and by A_12 A_11 and A_12 sent two messages forward. The messages were received by B, A_2 Let’s see what was a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports. Here is a subscription of the A_2 orchestration. Models I had a hard time trying to explain the Partner Direct Ports in simple terms. I have finished with this model: Forward Binding Receivers know a Sender. Sender doesn’t know Receivers. Publishers know a Subscriber. Subscriber doesn’t know Publishers. 1 –> 1 1 –> M Inverse Binding Senders know a Receiver. Receiver doesn’t know Senders. Subscribers know a Publisher. Publisher doesn’t know Subscribers. 1 –> 1 M –> 1 Notes   Orchestration chain It’s worth to note, the Partner Direct Port Binding creates a chain opened from one side and closed from another. The Forward Binding: A new Receiver can be added at run-time. The Sender can not be changed without design-time changes in Receivers. The Inverse Binding: A new Sender can be added at run-time. The Receiver can not be changed without design-time changes in Senders.

    Read the article

  • .htaccess / 301 redirection question

    - by John K
    All my WordPress post URLs generate subdirectories with duplicate content and I do not know what regular expression to use to consistently 301 redirect domain.com/category/post/random-number/ to domain.com/category/post/ and domain.com/category/post/random-number/another-random-number/ also to domain.com/category/post/. Here is an example of my problem: http://www.example.com/features/harb-constitution-not-to-allow-kr-provinces-to-receive-foreign-officials/ http://www.example.com/features/harb-constitution-not-to-allow-kr-provinces-to-receive-foreign-officials/1345257927000/

    Read the article

  • Evolution sending Email Settings

    - by Jack
    Can receive Comcast mail with evolution but cannot send. The SMTP settings record more digits when clicking the Server Configuration apply key. Sending ([email protected]:tenz222) port587 After clicking apply, receive a "Error while sending message" host lookup failed etc When rechecking,the sever settings are, ([email protected]%253atenz222) Attempted this process many times with same result. Now need to be proactive and ask for help. Will phone for help anywhere, anytime in USA. Thanks

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >