Search Results

Search found 10892 results on 436 pages for 'dual map'.

Page 150/436 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Windows Cannot Boot - 0xc0000225

    - by B__
    I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

    Read the article

  • 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

    - by Hossein Aarabi
    I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • OS X: Finder error -36 when using SMB shares on a Samba server bound to AD

    - by Frenchie
    We're looking at deploying SMB homes on Debian (5.0.3) for our mac clients rather than purchasing four new Xserves. We've got our test servers built and functioning properly. Windows clients behave perfectly, but we've run into an issue with OS X (10.6.x and 10.5.x). We're going this route instead of Windows file servers due to a whole bunch of other issues that arise when going that way. Specifically, when mounting a SMB share with unix extensions switched on and the remote server bound to AD, the finder cannot save files on the share, instead touching the file and then bombing out with a -36 IO error, folder creation is fine. Copying files in the terminal behaves fine and the problem seems to be limited to the finder. The issue arises (I think) as the remote UID/GID is passed across when using unix extensions. OS X uses its own winbind idmap (odsam) to work out the effective UID/GID from AD users and groups whilst we're using a rid map on the server. Consequently, there is a mismatch in ownership which the finder chooses to honour. How OS X appears to handle this is to use the remote uid and gid at the file permission level (see below) and then set an OS X acl granting the local uid/gid to have the appropriate permissions on the file. I think the finder touches the file (which the kernel allows because of the ACL) and then checks the filesystem perms and drops out with the IO error. On a Client fc-003353-d:homes2 root# ls -led test/ drwx------+ 2 135978 100513 16384 Feb 3 15:14 test/ 0: user:jfrench allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit 1: group:ARTS\domain users allow 2: group:everyone allow 3: group:owner allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 4: group:group allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 5: group:everyone allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit We've tried the following without any luck: Setting the Linux side file owner to match the OS X GID/UID Adding ACLs on the linux filesystem which grant the OS X GID/UID perms Disabling extended attributes Setting steams=no in /etc/nsmb.conf on the client We're currently running a workaround which is to just turn off unix extensions which forces the macs to just mount the share as the local user with u=rwx perms. This works for most things but is causing a few apps that expect certain perms to break in subtle ways. Worst case scenario is that we'll continue running in this way but we would like to have the unix extensions on. Regards. Relevant SMB config below: [global] workgroup = ARTS realm = *snip* security = ADS password server = *snip* unix extensions = yes panic action = /usr/share/panic-action %d idmap backend = rid:ARTS=100000-10000000 idmap uid = 100000-10000000 idmap gid = 100000-10000000 winbind enum users = Yes winbind enum groups = Yes veto files = /lost+found/aquota.*/ hide files = /desktop.ini/$RECYCLE.BIN/.*/AppData/Library/ ea support = yes store dos attributes = yes map system = no map archive = no map readonly = no

    Read the article

  • How to setup Hadoop cluster so that it accepts mapreduce jobs from remote computers?

    - by drasto
    There is a computer I use for Hadoop map/reduce testing. This computer runs 4 Linux virtual machines (using Oracle virtual box). Each of them has Cloudera with Hadoop (distribution c3u4) installed and serves as a node of Hadoop cluster. One of those 4 nodes is master node running namenode and jobtracker, others are slave nodes. Normally I use this cluster from local network for testing. However when I try to access it from another network I cannot send any jobs to it. The computer running Hadoop cluster has public IP and can be reached over internet for another services. For example I am able to get HDFS (namenode) administration site and map/reduce (jobtracker) administration site (on ports 50070 and 50030 respectively) from remote network. Also it is possible to use Hue. Ports 8020 and 8021 are both allowed. What is blocking my map/reduce job submits from reaching the cluster? Is there some setting that I must change first in order to be able to submit map/reduce jobs remotely? Here is my mapred-site.xml file: <configuration> <property> <name>mapred.job.tracker</name> <value>master:8021</value> </property> <!-- Enable Hue plugins --> <property> <name>mapred.jobtracker.plugins</name> <value>org.apache.hadoop.thriftfs.ThriftJobTrackerPlugin</value> <description>Comma-separated list of jobtracker plug-ins to be activated. </description> </property> <property> <name>jobtracker.thrift.address</name> <value>0.0.0.0:9290</value> </property> </configuration> And this is in /etc/hosts file: 192.168.1.15 master 192.168.1.14 slave1 192.168.1.13 slave2 192.168.1.9 slave3

    Read the article

  • blender rendering question

    - by Kombuwa
    hi, I need to render a 3d model that have been implement uv map in blender. When I press the render button it renders with normal blender material. But I need to render it with uv map textures. please help me.

    Read the article

  • Merging partitions and removing windows of one partition

    - by SmartLemon
    I have two partitions on my laptop, I created a new one when installing windows 8 pro because windows 7 wouldn't upgrade to it for some odd reason. The main partition, which has 631 GB ( has windows 7 installed on it, and the second partition is 49.9 GB and has windows 8 installed on it. What I need to do is remove windows 7 from the other one (Yeah its dual booting), make it so it boots straight into windows 8, without showing the dual boot screen, and also merge the two drives together. Only problem is, I have no idea how to do this. Please don't use complete lamens terms, I am a software developer so I know at least a bit about computers. Here's disk management so you can see how its set out.

    Read the article

  • Combining two operators in Evil-mode Emacs

    - by Dyslexic Tangent
    In vim I've remapped > and < when in visual mode to >gv and <gv respectively, like so: vnoremap > >gv vnoremap < <gv Since my target for this question are folks experienced with emacs and not vim, what > and < do is indent/dedent visually selected text. What gv does is reselect the previously selected text. These maps cause > and < to indent/dedent and then reselect the previously selected text. I'm trying out emacs with evil-mode and I'd like to do the same, but I'm having some difficulty figuring out how, exactly, to accomplish the automatic reselection. It looks like I need to somehow call evil-shift-right and evil-visual-restore sequentially, but I don't know how to create a map that will do both, so I tried creating my own function which would call both sequentially and map that instead, but it didn't work, possibly due to the fact that both of them are defined, not as functions with defun but instead as operators with evil-define-operator. I tried creating my own operators: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-restore)) but that doesn't restore visual as expected. A stab in the dark gave me this: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) ('evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) ('evil-visual-restore)) but that selects one additional line whenever it is supposed to reselect. For now I've been using the following, which only has the problem where it reselects an additional line in the < operator. (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-make-selection beg end)) (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-make-selection beg end)) and I've mapped them: (define-key evil-visual-state-map ">" 'shift-right-reselect) (define-key evil-visual-state-map "<" 'shift-left-reselect) any help / pointers / tips would be greatly appreciated. Thanks in advance.

    Read the article

  • Laptop as server [closed]

    - by Parhs
    My client wants to use a cheap AMD E-300 ,5400 rpm disk,4gb memory laptop as a POS server and music player at the same time with dual screen. I couldnt convince him that this wouldnt be a good choice. The applications are a database a music player ,and the .net 4 application. I am afraid of performance issues. However the reasons for this choice is that laptop takes not much space ,easy dual screen for music player and application ,can easilly be replaced and that it will last forever as none of his laptops are ever broken. I believe that this is a good idea but i feel thats something wrong there. Do you believe that is an ok choice?

    Read the article

  • Cisco VPN Client Behind ASA 5505

    - by fdf33
    I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

    Read the article

  • VirtualBox - split partitioned VDI into separate VDIs

    - by mathematical.coffee
    I'm very new to VirtualBox. I set up an Arch Linux VM and a Ubuntu VM (Ubuntu host), both sharing the same .vdi like so (I had in my mind a dual-boot situation): VDI file (25GB) |- /dev/sda1: 5GB (Arch Linux) |- /dev/sda2: [Ubuntu] |- /dev/sda5 (swap, 1GB) |- /dev/sda6 Ubuntu /, 9GB |- /dev/sda7 Ubuntu /home, 10GB I've now realised that I don't want a dual-boot-type setup, I'd rather boot each machine independently (my initial thought was to share /home between Ubunto and Arch). So, my question: Can I split /dev/sda1 and /dev/sda2 each to their own .vdi files so I can use them as completely separate machines? I'd rather not have to re-install either Arch (because it took me ages to work it out!) or Ubuntu (because I've already done a few GB of updates and don't want to redo them). I haven't been able to find anything about this - most questions I see are about converting a .vdi to a partition on the host, or splitting a .vdi into multiple smaller files (that are not independent), or converting a partition on the host to a .vdi file. cheers.

    Read the article

  • How can access files on shared drive from Windows 2008 server configured with SFTP

    - by communicator
    I have installed OpenSSH on my windows 2008 server by following the user guide here . Now I have some files on windows network share with UNC path as \\corp\test\testdata I want map this file system on network share to my windows 2008 server which is configred with SFTP so that I can access these files from my Java Program by doing SFTP to windows 2008 server.Is there anyway I can map the network share to C or other drive in server so that all the files on the share will be available as local files on the server?

    Read the article

  • Windows 7 recognises the wrong router.

    - by Henry
    I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

    Read the article

  • Problems enabling BitLocker on Windows 7 enterprise

    - by ericl42
    I had BitLocker turned on originally when I loaded the computer but had to turn it off to do some testing. I recently tried to turn it back on and I continue to get the following error: Blockquote A required TPM measurement is missing. If there is a bootable CD or DVD in your computer, remove it, restart the computer, and turn on BitLocker again. If the problem persists, ensure the master boot record is up to date. Blockquote I have verified that there is nothing in the DVD tray and that the laptop is not docked. I have also verified that TPM is running and I have no problems enabling BitLocker on a flash drive. I think it's a problem with my MBR since I am dual booting into Fedora as well but I am not sure how to fix it. (even though it did work a few months ago while I was also dual booted) Thank you for the help.

    Read the article

  • Ethernet: network topology

    - by aix
    Consider a standard GigE network switch. In order to do the switching, presumably it needs to maintain a map of MAC addresses of all things that exist on the network to its (switch's) port numbers. How does it maintain such a map? What are the protocols involved? If I change the topology of one part of the network, does the entire network get notified or do things get discovered "lazily" (i.e. on first need)?

    Read the article

  • Freebsd or Linux? as BGP router over 100mbps

    - by Yucong Sun
    I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

    Read the article

  • Control-Backspace (unix-kill-rubout) for readline?

    - by Xepoch
    In readline(3) I should be able to map Control-Backspace to the same function as Control-W (unix-kill-rubout). Regardless of what I put in ~/.inputrc I'm unable to get this to be recognized. \C-\b: unix-kill-rubout ...for instance does not work. Can I map Control-Backspace to the unix-kill-rubout in readline?

    Read the article

  • WD My Passport detected but not assigned a drive letter

    - by abel
    I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

    Read the article

  • Integrated video card not detected after installing new video card

    - by Jaime
    Hi, I got this emachines ET1331G-03W with a built in integrated video card (GeForce 6150SE). I added another video card (e-GeForece 6200 LE) in the hopes that I utilize both and have a dual monitor. But once the additional card was installed, windows 7 does not recognize the integrated video. Is it possible to use both video cards and have a dual monitor setup? Is there a switch on the motherboard that I have to turn on or off to enable the integrated video card along with the new card. Thanks!

    Read the article

  • Mac OSX: Scroll half a page

    - by Eddy
    I am no longer using the trackpad on my macbook and using a separate wired apple keyboard instead. I miss the scrolling functionality on my trackpad, I'm having to make do with the keyboard (the mouse is too far away for efficient scrolling). Is there a way to map a key combination (such as cmd+pagedown) such that I scroll up/down half a page instead of a full page? Even better, is there a way to map key combinations to arbitrary scrolling distances? Thanks for your time

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >