Search Results

Search found 4808 results on 193 pages for 'reserved instances'.

Page 150/193 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Fixing some Visual Studio RC install issues

  - by terje

  The Visual Studio RC has shown some install issues in some cases, particularly for those who upgrades from VS 11 Beta.  I have listed the fixes known now below, and will update if there are more issues.  Note that a repair will not fix the issue, and a Windows restore and subsequent reinstall may not fix it either.  The system seems to remember too much. That was the case for me, at least.  The fixes below however, cures these issues. 1. The Team Explorer Build node doesn’t work You get an error saying System.TypeLoadException like this: To solve this do as follows: 1. Open a command prompt as administrator 2. Go to your program files directory for VS 2012 and down to  the extension folder like:   C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer 3. Run “gacutil –if Microsoft.TeamFoundation.Build.Controls.dll     2. The SQL Editor gives loading error When you start up VS 2012 RC you get a loading error message.  The same happens if you try to go from the menu to  SQL/Transact-SQL Editor/New Query.    To solve this do as follows: 1. Open Control Panel/Programs and Features 2. Locate the “Microsoft SQL Server 2012 Data-Tier App Framework     (Note , you might find up to 4 such instances) The ones with version numbers ending in 55 is from the SQL 2012 RC, the ones ending in 60 is from the SQL 2012 RTM.  There are two of each, one for x32 and one for x64.  Which is which no one knows. 3. Right click each of them, and select Repair. (It would be nice if someone with this issue tries only the latest RTM ones, and see if that clears the error, and comment back to this post. I am out of non-functioning VS’s )   3.  Errors referring to some extension You get errors referring to some extension that can’t be loaded, or can’t be found.  Check the activity log (see below), and verify there.  If you see yellow collision warnings there, the fix here should solve those too. To solve these:    1. Open a Visual Studio 2012 command prompt 2.  Run:   devenv /resetsettings     How to check for errors using the log Do as follows to get to the activity log for Visual studio 2012 RC 1. Open a Visual Studio 2012 command prompt 2. Run:   devenv /log This starts up Visual Studio.  3. Go to %appdata%/Microsoft\VisualStudio\11.0 4. Double click the file named ActivityLog.xml.  It will start up in your browser, and be formatted using the xslt in the same directory. 5.  Look for items marked in red.  Example for Issue 1 :

  Read the article

• Designing status management for a file processing module

  - by bot

  The background One of the functionality of a product that I am currently working on is to process a set of compressed files ( containing XML files ) that will be made available at a fixed location periodically (local or remote location - doesn't really matter for now) and dump the contents of each XML file in a database. I have taken care of the design for a generic parsing module that should be able to accommodate the parsing of any file type as I have explained in my question linked below. There is no need to take a look at the following link to answer my question but it would definitely provide a better context to the problem Generic file parser design in Java using the Strategy pattern The Goal I want to be able to keep a track of the status of each XML file and the status of each compressed file containing the XML files. I can probably have different statuses defined for the XML files such as NEW, PROCESSING, LOADING, COMPLETE or FAILED. I can derive the status of a compressed file based on the status of the XML files within the compressed file. e.g status of the compressed file is COMPLETE if no XML file inside the compressed file is in a FAILED state or status of the compressed file is FAILED if the status of at-least one XML file inside the compressed file is FAILED. A possible solution The Model I need to maintain the status of each XML file and the compressed file. I will have to define some POJOs for holding the information about an XML file as shown below. Note that there is no need to store the status of a compressed file as the status of a compressed file can be derived from the status of its XML files. public class FileInformation { private String compressedFileName; private String xmlFileName; private long lastModifiedDate; private int status; public FileInformation(final String compressedFileName, final String xmlFileName, final long lastModified, final int status) { this.compressedFileName = compressedFileName; this.xmlFileName = xmlFileName; this.lastModifiedDate = lastModified; this.status = status; } } I can then have a class called StatusManager that aggregates a Map of FileInformation instances and provides me the status of a given file at any given time in the lifetime of the appliciation as shown below : public class StatusManager { private Map<String,FileInformation> processingMap = new HashMap<String,FileInformation>(); public void add(FileInformation fileInformation) { fileInformation.setStatus(0); // 0 will indicates that the file is in NEW state. 1 will indicate that the file is in process and so on.. processingMap.put(fileInformation.getXmlFileName(),fileInformation); } public void update(String filename,int status) { FileInformation fileInformation = processingMap.get(filename); fileInformation.setStatus(status); } } That takes care of the model for the sake of explanation. So whats my question? Edited after comments from Loki and answer from Eric : - I would like to know if there are any existing design patterns that I can refer to while coming up with a design. I would also like to know how I should go about designing the status management classes. I am more interested in understanding how I can model the status management classes. I am not interested in how other components are going to be updated about a change in status at the moment as suggested by Eric.

  Read the article

• WebLogic Server Performance and Tuning: Part II - Thread Management

  - by Gokhan Gungor

  WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

  Read the article

• Synchronous Actions

  - by Dan Krasinski-Oracle

  Since the introduction of SMF, svcadm(1M) has had the ability to enable or disable a service instance and wait for that service instance to reach a final state.  With Oracle Solaris 11.2, we’ve expanded the set of administrative actions which can be invoked synchronously. Now all subcommands of svcadm(1M) have synchronous behavior. Let’s take a look at the new usage: Usage: svcadm [-v] [cmd [args ... ]] svcadm enable [-rt] [-s [-T timeout]] <service> ... enable and online service(s) svcadm disable [-t] [-s [-T timeout]] <service> ... disable and offline service(s) svcadm restart [-s [-T timeout]] <service> ... restart specified service(s) svcadm refresh [-s [-T timeout]] <service> ... re-read service configuration svcadm mark [-It] [-s [-T timeout]] <state> <service> ... set maintenance state svcadm clear [-s [-T timeout]] <service> ... clear maintenance state svcadm milestone [-d] [-s [-T timeout]] <milestone> advance to a service milestone svcadm delegate [-s] <restarter> <svc> ... delegate service to a restarter As you can see, each subcommand now has a ‘-s’ flag. That flag tells svcadm(1M) to wait for the subcommand to complete before returning. For enables, that means waiting until the instance is either ‘online’ or in the ‘maintenance’ state. For disable, the instance must reach the ‘disabled’ state. Other subcommands complete when: restart A restart is considered complete once the instance has gone offline after running the ‘stop’ method, and then has either returned to the ‘online’ state or has entered the ‘maintenance’ state. refresh If an instance is in the ‘online’ state, a refresh is considered complete once the ‘refresh’ method for the instance has finished. mark maintenance Marking an instance for maintenance completes when the instance has reached the ‘maintenance’ state. mark degraded Marking an instance as degraded completes when the instance has reached the ‘degraded’ state from the ‘online’ state. milestone A milestone transition can occur in one of two directions. Either the transition moves from a lower milestone to a higher one, or from a higher one to a lower one. When moving to a higher milestone, the transition is considered complete when the instance representing that milestone reaches the ‘online’ state. The transition to a lower milestone, on the other hand, completes only when all instances which are part of higher milestones have reached the ‘disabled’ state. That’s not the whole story. svcadm(1M) will also try to determine if the actions initiated by a particular subcommand cannot complete. Trying to enable an instance which does not have its dependencies satisfied, for example, will cause svcadm(1M) to terminate before that instance reaches the ‘online’ state. You’ll also notice the optional ‘-T’ flag which can be used in conjunction with the ‘-s’ flag. This flag sets a timeout, in seconds, after which svcadm gives up on waiting for the subcommand to complete and terminates. This is useful in many cases, but in particular when the start method for an instance has an infinite timeout but might get stuck waiting for some resource that may never become available. For the C-oriented, each of these administrative actions has a corresponding function in libscf(3SCF), with names like smf_enable_instance_synchronous(3SCF) and smf_restart_instance_synchronous(3SCF).  Take a look at smf_enable_instance_synchronous(3SCF) for details.

  Read the article

• Causes of sudden massive filesystem damage? ("root inode is not a directory")

  - by poolie

  I have a laptop running Maverick (very happily until yesterday), with a Patriot Torx SSD; LUKS encryption of the whole partition; one lvm physical volume on top of that; then home and root in ext4 logical volumes on top of that. When I tried to boot it yesterday, it complained that it couldn't mount the root filesystem. Running fsck, basically every inode seems to be wrong. Both home and root filesystems show similar problems. Checking a backup superblock doesn't help. e2fsck 1.41.12 (17-May-2010) lithe_root was not cleanly unmounted, check forced. Resize inode not valid. Recreate? no Pass 1: Checking inodes, blocks, and sizes Root inode is not a directory. Clear? no Root inode has dtime set (probably due to old mke2fs). Fix? no Inode 2 is in use, but has dtime set. Fix? no Inode 2 has a extra size (4730) which is invalid Fix? no Inode 2 has compression flag set on filesystem without compression support. Clear? no Inode 2 has INDEX_FL flag set but is not a directory. Clear HTree index? no HTREE directory inode 2 has an invalid root node. Clear HTree index? no Inode 2, i_size is 9581392125871137995, should be 0. Fix? no Inode 2, i_blocks is 40456527802719, should be 0. Fix? no Reserved inode 3 (<The ACL index inode>) has invalid mode. Clear? no Inode 3 has compression flag set on filesystem without compression support. Clear? no Inode 3 has INDEX_FL flag set but is not a directory. Clear HTree index? no .... Running strings across the filesystems, I can see there are what look like filenames and user data there. I do have sufficiently good backups (touch wood) that it's not worth grovelling around to pull back individual files, though I might save an image of the unencrypted disk before I rebuild, just in case. smartctl doesn't show any errors, neither does the kernel log. Running a write-mode badblocks across the swap lv doesn't find problems either. So the disk may be failing, but not in an obvious way. At this point I'm basically, as they say, fscked? Back to reinstalling, perhaps running badblocks over the disk, then restoring from backup? There doesn't even seem to be enough data to file a meaningful bug... I don't recall that this machine crashed last time I used it. At this point I suspect a bug or memory corruption caused it to write garbage across the disks when it was last running, or some kind of subtle failure mode for the SSD. What do you think would have caused this? Is there anything else you'd try?

  Read the article

• Looking into the JQuery Cycle Plugin

  - by nikolaosk

  I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client. You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Cycle Plugin.I have been using extensively this plugin in my websites.You can rotate a series of images using various transitions with this plugin.It is a slideshow type of experience. I will be writing more posts regarding the most commonly used JQuery Plugins.  In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.  You can download this plugin from this link I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >            <script type="text/javascript" src="jquery-1.8.3.min.js"> </script>     <script type="text/javascript" src="jquery.cycle.all.js"></script>              <script type="text/javascript">        $(function() {            $('#main').cycle({ fx: 'fade'});        });    </script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>        <div id="main">                   <img src="championsofeurope.jpg" alt="Champions of Europe">                        <img src="steven_gerrard.jpg" alt="Steven Gerrard">                        <img src="ynwa.jpg" alt="You will never walk alone">                       </div>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html> This is a very simple markup. I have added three photos (make sure you use your own when trying this example)I have added references to the JQuery library (current version is 1.8.3) and the JQuery Cycle Plugin. Then I have added 3 images in the main div element.The Javascript code that makes it all happen follows.  <script type="text/javascript">        $(function() {            $('#main').cycle({ fx: 'fade'});        });    </script>  It couldn't be any simpler than that. I view my simple in Internet Explorer 10 and it works as expected. I have this series of images transitioning one after the other using the "fade" effect. I have tested this simple solution in all major browsers and it works fine.We can have a different transition effect by changing the JS code. Have a look at the code below       <script type="text/javascript">        $(function() {            $('#main').cycle({                     fx: 'cover',        speed: 500,        timeout: 2000                        });        });    </script>   We set the speed to 500 milliseconds, that is the speed we want to have for the ‘cover’ transition.The timeout is set to two seconds which is the time the photo will show until the next transition will take place.We can customise this plugin further but this is a short introduction to the plugin.Hope it helps!!!

  Read the article

• BizTalk: Instance Subscription: Details

  - by Leonid Ganeline

  It has interesting behavior and it is not always what we are waiting for. An orchestration can be enlisted with many subscriptions. In other word it can have several Receive shapes. Usually the first Receive uses the Activation subscription but other Receives create the Instance subscriptions. [See “Publish and Subscribe Architecture” in MSDN] Here is a sample process. This orchestration has two receives. It is a typical Sequential Convoy. [See "BizTalk Server 2004 Convoy Deep Dive" in MSDN by Stephen W. Thomas]. Let's experiment started.   There are three typical scenarios. First scenario: everything is OK Activation subscription for the Sample message is created when the orchestration the SampleProcess is enlisted. The Instance subscription is created only when the SampleProcess orchestration instance is started and it is removed when the orchestration instance is ended. So far so good, the Message_2 was delivered exactly in this time interval and was consumed. Second scenario: no consumers Three Sample_2 messages were delivered. One was delivered before the SampleProcess was started and before the instance subscription was created. Second message was delivered in the correct time interval. The third one was delivered after the SampleProcess orchestration was ended and the instance subscription was removed. Note: ·         It was not the first Sample_2 was consumed. It was first in the queue but in was not waiting, it was suspended when it was delivered to the Message Box and didn’t have any subscribers at this moment. The first and the last Sample_2 messages were Suspended (Nonresumable) in the Message Box. For each of this message we have got two (!) service instances associated with this suspended message. One service instance has the ServiceClass of Messaging, and we can see its Error Description:   The second service instance has the ServiceClass of RoutingFailureReport, and we can see its Error Description:   Third scenario: something goes wrong Two Sample_2 messages were delivered. Both were delivered in the same interval when the SampleProcess orchestration was working and the instance subscription was created and was working too. First Sample_2 was consumed. The second Sample_2 has the subscription but the subscriber, the SampleProcess orchestration, will not consume it. After the SampleProcess orchestration is ended (And only after! I will discuss this in the next article.), it is suspended (Nonresumable). In this time only one service instance associated with this kind of scenario is suspended. This service instance has the ServiceClass of Orchestration, and we can see its Error Description: In the Message tab we will see the Sample_2 message in the Suspended (Resumable) status. Note: ·         This behavior looks ambiguous. We see here the orchestration consumes the extra message(s) and gets suspended together with those extra messages. These messages are not consumed in term of “processed by orchestration”. But they are consumed in term of the “delivered to the subscriber”. The receive shape in the orchestration is not received these extra messages. But these messages are routed to the orchestration.     Unified Sequential convoy  Now one more scenario. It is the unified sequential convoy. That means the activation subscription is for the same message type as it for the instance subscription. The Sample_2 message is now the Sample message. For simplicity the SampleProcess orchestration consumes only two Sample messages. Usually the orchestration consumes a lot of messages inside loop, but now it is only two of them. First message starts the orchestration, the second message goes inside this orchestration. Then the next pair of messages follows, and so on. But if the input messages follow in shorter intervals we have got the problem. We lost messages in unpredictable manner. Note: ·         Maybe the better behavior would be if the orchestration removes the instance subscription after the message is consumed, not in the end on the orchestration. Right now it is a “feature” of the BizTalk subscription mechanism.

  Read the article

• Good DBAs Do Baselines

  - by Louis Davidson

  One morning, you wake up and feel funny. You can’t quite put your finger on it, but something isn’t quite right. What now? Unless you happen to be a hypochondriac, you likely drag yourself out of bed, get on with the day and gather more “evidence”. You check your symptoms over the next few days; do you feel the same, better, worse? If better, then great, it was some temporal issue, perhaps caused by an allergic reaction to some suspiciously spicy chicken. If the same or worse then you go to the doctor for some health advice, but armed with some data to share, and having ruled out certain possible causes that are fixed with a bit of rest and perhaps an antacid. Whether you realize it or not, in comparing how you feel one day to the next, you have taken baseline measurements. In much the same way, a DBA uses baselines to gauge the gauge health of their database servers. Of course, while SQL Server is very willing to share data regarding its health and activities, it has almost no idea of the difference between good and bad. Over time, experienced DBAs develop “mental” baselines with which they can gauge the health of their servers almost as easily as their own body. They accumulate knowledge of the daily, natural state of each part of their database system, and so know instinctively when one of their databases “feels funny”. Equally, they know when an “issue” is just a passing tremor. They see their SQL Server with all of its four CPU cores running close 100% and don’t panic anymore. Why? It’s 5PM and every day the same thing occurs when the end-of-day reports, which are very CPU intensive, are running. Equally, they know when they need to respond in earnest when it is the first time they have heard about an issue, even if it has been happening every day. Nevertheless, no DBA can retain mental baselines for every characteristic of their systems, so we need to collect physical baselines too. In my experience, surprisingly few DBAs do this very well. Part of the problem is that SQL Server provides a lot of instrumentation. If you look, you will find an almost overwhelming amount of data regarding user activity on your SQL Server instances, and use and abuse of the available CPU, I/O and memory. It seems like a huge task even to work out which data you need to collect, let alone start collecting it on a regular basis, managing its storage over time, and performing detailed comparative analysis. However, without baselines, though, it is very difficult to pinpoint what ails a server, just by looking at a single snapshot of the data, or to spot retrospectively what caused the problem by examining aggregated data for the server, collected over many months. It isn’t as hard as you think to get started. You’ve probably already established some troubleshooting queries of the type SELECT Value FROM SomeSystemTableOrView. Capturing a set of baseline values for such a query can be as easy as changing it as follows: INSERT into BaseLine.SomeSystemTable (value, captureTime) SELECT Value, SYSDATETIME() FROM SomeSystemTableOrView; Of course, there are monitoring tools that will collect and manage this baseline data for you, automatically, and allow you to perform comparison of metrics over different periods. However, to get yourself started and to prove to yourself (or perhaps the person who writes the checks for tools) the value of baselines, stick something similar to the above query into an agent job, running every hour or so, and you are on your way with no excuses! Then, the next time you investigate a slow server, and see x open transactions, y users logged in, and z rows added per hour in the Orders table, compare to your baselines and see immediately what, if anything, has changed!

  Read the article

• Calculated Fields - Idiosyncracies

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

  Read the article

• The Rise of Project Intelligence and Why It Matters

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Amy DeWolf Are you doing any of these in your organization? How are you leveraging historical data to forecast projects? There’s a lot going on in government today. The economic pressures agencies feel from the uncertainty of budget cuts and sequestration effect every part of an organization, including the Project Management Office (PMO).  The PMO is responsible for monitoring and administering government IT projects. As time goes on, priorities shift, technology advances, and new regulations are imposed, all of which make planning and executing projects more difficult.  For example, think about your own projects.  How many boxes do you need to check and hoops do you need to jump through to ensure you comply with new regulations? While new regulations and technology advancements can be a good thing, they add an additional layer of complexity to already complex projects. To overcome some of these pressures, particularly new regulations, many in the PMO world are adopting a new approach- Project Intelligence (PI). According to a new Oracle Primavera white paper, The Rise of Project Intelligence: When Project Management is Just Not Enough, “PI uses Business Intelligence methods to leverage historical project data to make more informed decisions and greatly enhance project execution.” Currently, project managers plan and forecast the possible phases in an execution cycle.  However, most project managers don’t have the proper tools to do this as effectively as they would like. As the white paper noted, “The underlying deficiencies in most forecasting approaches are that 1) the PM fails in most instances to leverage historical data and 2) the PM doesn’t employ current Business Intelligence tools.” PI seeks to overturn this by combining modeling tools used in Business Intelligence for projects with the understanding of Emotional Intelligence for managing people.   Simply put, Project Intelligence is built off four main pillars: Actively use historical data to forecast project cycles Understand the intricacies of complex projects Enhance social and emotional intelligence in projects Actively use Business intelligence tools Read our complimentary whitepaper and discover the importance of emotional intelligence and best practices for improving projects, specifically in terms of communication.

  Read the article

• Caching factory design

  - by max

  I have a factory class XFactory that creates objects of class X. Instances of X are very large, so the main purpose of the factory is to cache them, as transparently to the client code as possible. Objects of class X are immutable, so the following code seems reasonable: # module xfactory.py import x class XFactory: _registry = {} def get_x(self, arg1, arg2, use_cache = True): if use_cache: hash_id = hash((arg1, arg2)) if hash_id in _registry: return _registry[hash_id] obj = x.X(arg1, arg2) _registry[hash_id] = obj return obj # module x.py class X: # ... Is it a good pattern? (I know it's not the actual Factory Pattern.) Is there anything I should change? Now, I find that sometimes I want to cache X objects to disk. I'll use pickle for that purpose, and store as values in the _registry the filenames of the pickled objects instead of references to the objects. Of course, _registry itself would have to be stored persistently (perhaps in a pickle file of its own, in a text file, in a database, or simply by giving pickle files the filenames that contain hash_id). Except now the validity of the cached object depends not only on the parameters passed to get_x(), but also on the version of the code that created these objects. Strictly speaking, even a memory-cached object could become invalid if someone modifies x.py or any of its dependencies, and reloads it while the program is running. So far I ignored this danger since it seems unlikely for my application. But I certainly cannot ignore it when my objects are cached to persistent storage. What can I do? I suppose I could make the hash_id more robust by calculating hash of a tuple that contains arguments arg1 and arg2, as well as the filename and last modified date for x.py and every module and data file that it (recursively) depends on. To help delete cache files that won't ever be useful again, I'd add to the _registry the unhashed representation of the modified dates for each record. But even this solution isn't 100% safe since theoretically someone might load a module dynamically, and I wouldn't know about it from statically analyzing the source code. If I go all out and assume every file in the project is a dependency, the mechanism will still break if some module grabs data from an external website, etc.). In addition, the frequency of changes in x.py and its dependencies is quite high, leading to heavy cache invalidation. Thus, I figured I might as well give up some safety, and only invalidate the cache only when there is an obvious mismatch. This means that class X would have a class-level cache validation identifier that should be changed whenever the developer believes a change happened that should invalidate the cache. (With multiple developers, a separate invalidation identifier is required for each.) This identifier is hashed along with arg1 and arg2 and becomes part of the hash keys stored in _registry. Since developers may forget to update the validation identifier or not realize that they invalidated existing cache, it would seem better to add another validation mechanism: class X can have a method that returns all the known "traits" of X. For instance, if X is a table, I might add the names of all the columns. The hash calculation will include the traits as well. I can write this code, but I am afraid that I'm missing something important; and I'm also wondering if perhaps there's a framework or package that can do all of this stuff already. Ideally, I'd like to combine in-memory and disk-based caching.

  Read the article

• Strings in .NET are Enumerable

  - by Scott Dorman

  It seems like there is always some confusion concerning strings in .NET. This is both from developers who are new to the Framework and those that have been working with it for quite some time. Strings in the .NET Framework are represented by the System.String class, which encapsulates the data manipulation, sorting, and searching methods you most commonly perform on string data. In the .NET Framework, you can use System.String (which is the actual type name or the language alias (for C#, string). They are equivalent so use whichever naming convention you prefer but be consistent. Common usage (and my preference) is to use the language alias (string) when referring to the data type and String (the actual type name) when accessing the static members of the class. Many mainstream programming languages (like C and C++) treat strings as a null terminated array of characters. The .NET Framework, however, treats strings as an immutable sequence of Unicode characters which cannot be modified after it has been created. Because strings are immutable, all operations which modify the string contents are actually creating new string instances and returning those. They never modify the original string data. There is one important word in the preceding paragraph which many people tend to miss: sequence. In .NET, strings are treated as a sequence…in fact, they are treated as an enumerable sequence. This can be verified if you look at the class declaration for System.String, as seen below: // Summary:// Represents text as a series of Unicode characters.public sealed class String : IEnumerable, IComparable, IComparable<string>, IEquatable<string> The first interface that String implements is IEnumerable, which has the following definition: // Summary:// Exposes the enumerator, which supports a simple iteration over a non-generic// collection.public interface IEnumerable{ // Summary: // Returns an enumerator that iterates through a collection. // // Returns: // An System.Collections.IEnumerator object that can be used to iterate through // the collection. IEnumerator GetEnumerator();} As a side note, System.Array also implements IEnumerable. Why is that important to know? Simply put, it means that any operation you can perform on an array can also be performed on a string. This allows you to write code such as the following: string s = "The quick brown fox";foreach (var c in s){ System.Diagnostics.Debug.WriteLine(c);}for (int i = 0; i < s.Length; i++){ System.Diagnostics.Debug.WriteLine(s[i]);} If you executed those lines of code in a running application, you would see the following output in the Visual Studio Output window: In the case of a string, these enumerable or array operations return a char (System.Char) rather than a string. That might lead you to believe that you can get around the string immutability restriction by simply treating strings as an array and assigning a new character to a specific index location inside the string, like this: string s = "The quick brown fox";s[2] = 'a';   However, if you were to write such code, the compiler will promptly tell you that you can’t do it: This preserves the notion that strings are immutable and cannot be changed once they are created. (Incidentally, there is no built in way to replace a single character like this. It can be done but it would require converting the string to a character array, changing the appropriate indexed location, and then creating a new string.)

  Read the article

• What's up with LDoms: Part 5 - A few Words about Consoles

  - by Stefan Hinker

  Back again to look at a detail of LDom configuration that is often forgotten - the virtual console server. Remember, LDoms are SPARC systems.  As such, each guest will have it's own OBP running.  And to connect to that OBP, the administrator will need a console connection.  Since it's OBP, and not some x86 BIOS, this console will be very serial in nature ;-)  It's really very much like in the good old days, where we had a terminal concentrator where all those serial cables ended up in.  Just like with other components in LDoms, the virtualized solution looks very similar. Every LDom guest requires exactly one console connection.  Envision this similar to the RS-232 port on older SPARC systems.  The LDom framework provides one or more console services that provide access to these connections.  This would be the virtual equivalent of a network terminal server (NTS), where all those serial cables are plugged in.  In the physical world, we'd have a list somewhere, that would tell us which TCP-Port of the NTS was connected to which server.  "ldm list" does just that: root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 0.4% 27d 8h 22m jupiter bound ------ 5002 20 8G mars active -n---- 5000 2 8G 0.5% 55d 14h 10m venus active -n---- 5001 2 8G 0.5% 56d 40m pluto inactive ------ 4 4G The column marked "CONS" tells us, where to reach the console of each domain. In the case of the primary domain, this is actually a (more) physical connection - it's the console connection of the physical system, which is either reachable via the ILOM of that system, or directly via the serial console port on the chassis. All the other guests are reachable through the console service which we created during the inital setup of the system.  Note that pluto does not have a port assigned.  This is because pluto is not yet bound.  (Binding can be viewed very much as the assembly of computer parts - CPU, Memory, disks, network adapters and a serial console cable are all put together when binding the domain.)  Unless we set the port number explicitly, LDoms Manager will do this on a first come, first serve basis.  For just a few domains, this is fine.  For larger deployments, it might be a good idea to assign these port numbers manually using the "ldm set-vcons" command.  However, there is even better magic associated with virtual consoles. You can group several domains into one console group, reachable through one TCP port of the console service.  This can be useful when several groups of administrators are to be given access to different domains, or for other grouping reasons.  Here's an example: root@sun # ldm set-vcons group=planets service=console jupiter root@sun # ldm set-vcons group=planets service=console pluto root@sun # ldm bind jupiter root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 6.1% 27d 8h 24m jupiter bound ------ 5002 200 8G mars active -n---- 5000 2 8G 0.6% 55d 14h 12m pluto bound ------ 5002 4 4G venus active -n---- 5001 2 8G 0.5% 56d 42m root@sun # telnet localhost 5002 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. sun-vnts-planets: h, l, c{id}, n{name}, q:l DOMAIN ID DOMAIN NAME DOMAIN STATE 2 jupiter online 3 pluto online sun-vnts-planets: h, l, c{id}, n{name}, q:npluto Connecting to console "pluto" in group "planets" .... Press ~? for control options .. What I did here was add the two domains pluto and jupiter to a new console group called "planets" on the service "console" running in the primary domain.  Simply using a group name will create such a group, if it doesn't already exist.  By default, each domain has its own group, using the domain name as the group name.  The group will be available on port 5002, chosen by LDoms Manager because I didn't specify it.  If I connect to that console group, I will now first be prompted to choose the domain I want to connect to from a little menu. Finally, here's an example how to assign port numbers explicitly: root@sun # ldm set-vcons port=5044 group=pluto service=console pluto root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 3.8% 27d 8h 54m jupiter active -t---- 5002 200 8G 0.5% 30m mars active -n---- 5000 2 8G 0.6% 55d 14h 43m pluto bound ------ 5044 4 4G venus active -n---- 5001 2 8G 0.4% 56d 1h 13m With this, pluto would always be reachable on port 5044 in its own exclusive console group, no matter in which order other domains are bound. Now, you might be wondering why we always have to mention the console service name, "console" in all the examples here.  The simple answer is because there could be more than one such console service.  For all "normal" use, a single console service is absolutely sufficient.  But the system is flexible enough to allow more than that single one, should you need them.  In fact, you could even configure such a console service on a domain other than the primary (or control domain), which would make that domain a real console server.  I actually have a customer who does just that - they want to separate console access from the control domain functionality.  But this is definately a rather sophisticated setup. Something I don't want to go into in this post is access control.  vntsd, which is the daemon providing all these console services, is fully RBAC-aware, and you can configure authorizations for individual users to connect to console groups or individual domain's consoles.  If you can't wait until I get around to security, check out the man page of vntsd. Further reading: The Admin Guide is rather reserved on this subject.  I do recommend to check out the Reference Manual. The manpage for vntsd will discuss all the control sequences as well as the grouping and authorizations mentioned here.

  Read the article

• Removing occurrences of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable? Entire function string removeChars( string str, string remove ){ char[] s = str.toCharArray(); char[] r = remove.toCharArray(); bool[] flags = new bool[128]; // assumes ASCII! int len = s.Length; int src, dst; // Set flags for characters to be removed for( src = 0; src < len; ++src ){ flags[r[src]] = true; } src = 0; dst = 0; // Now loop through all the characters, // copying only if they aren’t flagged while( src < len ){ if( !flags[ (int)s[src] ] ){ s[dst++] = s[src]; } ++src; } return new string( s, 0, dst ); } as you can see, r comes from the remove string. So in my example the remove string has only a size of 3 while my str string has a size of 11. len is equal to the length of the str string. So it would be 11. How can I loop through the r string since it is only size 3? I haven't compiled the code so I can loop through it, but just looking at it I know it won't work. I am thinking they wanted to loop through the r string... in other words they got the length of the wrong string here.

  Read the article

• MySQL reserves too much RAM

  - by Buddy

  I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

  Read the article

• Consolidation in a Database Cloud

  - by B R Clouse

  Consolidation of multiple databases onto a shared infrastructure is the next step after Standardization.  The potential consolidation density is a function of the extent to which the infrastructure is shared.  The three models provide increasing degrees of sharing: Server: each database is deployed in a dedicated VM. Hardware is shared, but most of the software infrastructure is not. Standardization is often applied incompletely since operating environments can be moved as-is onto the shared platform. The potential for VM sprawl is an additional downside. Database: multiple database instances are deployed on a shared software / hardware infrastructure. This model is very efficient and easily implemented with the features in the Oracle Database and supporting products. Many customers have moved to this model and achieved significant, measurable benefits. Schema: multiple schemas are deployed within a single database instance. The most efficient model, it places constraints on the environment. Usually this model will be implemented only by customers deploying their own applications.  (Note that a single deployment can combine Database and Schema consolidations.) Customer value: lower costs, better system utilization In this phase of the maturity model, under-utilized hardware can be used to host more workloads, or retired and those workloads migrated to consolidation platforms. Customers benefit from higher utilization of the hardware resources, resulting in reduced data center floor space, and lower power and cooling costs. And, the OpEx savings from Standardization are multiplied, since there are fewer physical components (both hardware and software) to manage. Customer value: higher productivity The OpEx benefits from Standardization are compounded since not only are there fewer types of things to manage, now there are fewer entities to manage. In this phase, customers discover that their IT staff has time to move away from "day-to-day" tasks and start investing in higher value activities. Database users benefit from consolidating onto shared infrastructures by relieving themselves of the requirement to maintain their own dedicated servers. Also, if the shared infrastructure offers capabilities such as High Availability / Disaster Recovery, which are often beyond the budget and skillset of a standalone database environment, then moving to the consolidation platform can provide access to those capabilities, resulting in less downtime. Capabilities / Characteristics In this phase, customers will typically deploy fixed-size clusters and consolidate on a cluster until that cluster is deemed "full," at which point a new cluster is built. Customers will define one or a few cluster architectures that are used wherever possible; occasionally there may be deployments which must be handled as exceptions. The "full" policy may be based on number of databases deployed on the cluster, or observed peak workload, etc. IT will own the provisioning of new databases on a cluster, making the decision of when and where to place new workloads. Resources may be managed dynamically, e.g., as a priority workload increases, it may be given more CPU and memory to handle the spike. Users will be charged at a fixed, relatively coarse level; or in some cases, no charging will be applied. Activities / Tasks Oracle offers several tools to plan a successful consolidation. Real Application Testing (RAT) has a feature to help plan and validate database consolidations. Enterprise Manager 12c's Cloud Management Pack for Database includes a planning module. Looking ahead, customers should start planning for the Services phase by defining the Service Catalog that will be made available for database services.

  Read the article

• Windows 7 disk errors after a few hours of runtime

  - by GFK

  I'm having trouble understanding what is going on with my work PC. Whenever I boot it, it runs fine for a while, then starts to randomly show disk errors. The displayed error often contains the message "not enough storage is available to process this command", although depending on the application that fails it can be different. This has happened for weeks now and is getting worse. This is what troubles me: It never seems to impact critical parts of the system (no BSOD, no freeze). Only some applications seem impacted, refusing to function correctly after a while: Outlook 2010 cannot download RSS feeds anymore, Firefox 6 or IE9 cannot download anything bigger than 3MB without failing, Windows Update fails, all msi installers fail, Visual Studio 2010 starts failing in weird manners... It only happens after a while using it (typically 3 hours, but it seems that installing a program or compiling several times makes it shorter) Rebooting solves it (temporarily). The system: The OS is Windows 7 Pro Spanish SP1, 32 bits The system is an HP Compaq 6000 Pro with 4 GB memory (only 3.4GB usable since the system is 32bit), one 500GB hard drive. Installed applications include: Visual Studio 2010, SQL Server 2008 R2, VMWare Workstation 7, Microsoft Security Essentials, Office 2010. Shutting down all related services and processes doesn't seem to change anything. The diagnostics I've run so far: Hard drive : 465GB, 165GB free Process Explorer : physical and virtual memory seem ok (pagefile is 5.3GB, physical memory usage 70%, system commit 39%) Windows Memory diagnostic tool: OK CHKDSK returned: 488282111 KB total disk space. 281668248 KB in 265779 files. 150188 KB in 62949 indexes. 0 KB in bad sectors. 571755 KB in use by the system. The log file has occupied 65536 kilobytes. 205891920 KB available on disk. For non-spanish speakers, that means all ok. SMART diagnostic tools (DiskCheckup) report all values normal. temperatures are in the normal range (HWinfo). The event viewer doesn't seem to contain any significant message. ran CCleaner 3, without any noticeable effect. I was thinking about some file number limit (between Visual Studio projects and other applications, there are around 300.000 files on the hard drive), but I couldn't find any. It's possible there is something related with the use of the temporary folders (it's the only explanation I have for why applications fail but Windows doesn't), but I cannot confirm that. Only thing I cannot find out is if chkdsk reporting 65MB for the log is normal. It seems since Vista it always reports this. Any other cleaning/diagnostic tool you might know of? Edit: I ran several other tools since I first published the question: Seagate SeaTools (the HD manufacturer's analysis tool): complete test run OK. Intel Rapid 10.1 (the HD controller manufacturer's troubleshooting tool): the HD's ok. Microsoft Desktop Heap Monitor: Desktop Heap Information Monitor Tool (Version 8.1.2925.0) Copyright (c) Microsoft Corporation. All rights reserved. Session ID: 1 Total Desktop: ( 46464 KB - 11 desktops) WinStation\Desktop Heap Size(KB) Used Rate(%) WinSta0\Winlogon (s1) 128 3.6 WinSta0\Disconnect (s1) 64 3.8 WinSta0\Default (s1) 20480 3.0 msswindowstation\mssrestricteddesk (s0) 1024 0.2 __X78B95_89_IW__A8D9S1_42_ID (s0) 1024 0.2 Service-0x0-3e5$\Default (s0) 1024 0.6 Service-0x0-3e4$\Default (s0) 1024 0.3 Service-0x0-3e7$\Default (s0) 1024 2.1 WinSta0\Winlogon (s0) 128 1.9 WinSta0\Disconnect (s0) 64 3.8 WinSta0\Default (s0) 20480 0.0 All ok, desktop heap usage < 5% Edit 2: I tried totally resetting my account by creating a new one, logging under this new one and delete the first one (local rights and files), then logging back with this deleted account (it is a domain account). No luck. Also, I found out often the error is "not enough storage is available to process this command". Searching on the internet, I found an old troubleshooting tip (setting a registry key to raise the IRP stack limit, whatever it is) which did not change anything.

  Read the article

• OpenGL Fast-Object Instancing Error

  - by HJ Media Studios

  I have some code that loops through a set of objects and renders instances of those objects. The list of objects that needs to be rendered is stored as a std::map, where an object of class MeshResource contains the vertices and indices with the actual data, and an object of classMeshRenderer defines the point in space the mesh is to be rendered at. My rendering code is as follows: glDisable(GL_BLEND); glEnable(GL_CULL_FACE); glDepthMask(GL_TRUE); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glEnable(GL_DEPTH_TEST); for (std::map<MeshResource*, std::vector<MeshRenderer*> >::iterator it = renderables.begin(); it != renderables.end(); it++) { it->first->setupBeforeRendering(); cout << "<"; for (unsigned long i =0; i < it->second.size(); i++) { //Pass in an identity matrix to the vertex shader- used here only for debugging purposes; the real code correctly inputs any matrix. uniformizeModelMatrix(Matrix4::IDENTITY); /** * StartHere fix rendering problem. * Ruled out: * Vertex buffers correctly. * Index buffers correctly. * Matrices correct? */ it->first->render(); } it->first->cleanupAfterRendering(); } geometryPassShader->disable(); glDepthMask(GL_FALSE); glDisable(GL_CULL_FACE); glDisable(GL_DEPTH_TEST); The function in MeshResource that handles setting up the uniforms is as follows: void MeshResource::setupBeforeRendering() { glEnableVertexAttribArray(0); glEnableVertexAttribArray(1); glEnableVertexAttribArray(2); glEnableVertexAttribArray(3); glEnableVertexAttribArray(4); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, iboID); glBindBuffer(GL_ARRAY_BUFFER, vboID); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof(Vertex), 0); // Vertex position glVertexAttribPointer(1, 3, GL_FLOAT, GL_FALSE, sizeof(Vertex), (const GLvoid*) 12); // Vertex normal glVertexAttribPointer(2, 2, GL_FLOAT, GL_FALSE, sizeof(Vertex), (const GLvoid*) 24); // UV layer 0 glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE, sizeof(Vertex), (const GLvoid*) 32); // Vertex color glVertexAttribPointer(4, 1, GL_UNSIGNED_SHORT, GL_FALSE, sizeof(Vertex), (const GLvoid*) 44); //Material index } The code that renders the object is this: void MeshResource::render() { glDrawElements(GL_TRIANGLES, geometry->numIndices, GL_UNSIGNED_SHORT, 0); } And the code that cleans up is this: void MeshResource::cleanupAfterRendering() { glDisableVertexAttribArray(0); glDisableVertexAttribArray(1); glDisableVertexAttribArray(2); glDisableVertexAttribArray(3); glDisableVertexAttribArray(4); } The end result of this is that I get a black screen, although the end of my rendering pipeline after the rendering code (essentially just drawing axes and lines on the screen) works properly, so I'm fairly sure it's not an issue with the passing of uniforms. If, however, I change the code slightly so that the rendering code calls the setup immediately before rendering, like so: void MeshResource::render() { setupBeforeRendering(); glDrawElements(GL_TRIANGLES, geometry->numIndices, GL_UNSIGNED_SHORT, 0); } The program works as desired. I don't want to have to do this, though, as my aim is to set up vertex, material, etc. data once per object type and then render each instance updating only the transformation information. The uniformizeModelMatrix works as follows: void RenderManager::uniformizeModelMatrix(Matrix4 matrix) { glBindBuffer(GL_UNIFORM_BUFFER, globalMatrixUBOID); glBufferSubData(GL_UNIFORM_BUFFER, 0, sizeof(Matrix4), matrix.ptr()); glBindBuffer(GL_UNIFORM_BUFFER, 0); }

  Read the article

• MySQL Utility Users' Console Oerview

  - by rudrap

  MySQL Utility Users' Console (mysqluc): The MySQL Utilities Users' Console is designed to make using the utilities easier via a dedicated console. It helps us to use the utilities without worrying about the python and utility paths. Why do we need a special console? - It does provide a unique shell environment with command completion, help for each utility, user defined variables, and type completion for options. - You no longer have to type out the entire name of the utility. - You don't need to remember the name of a database utility you want to use. - You can define variables and reuse them in your utility commands. - It is possible to run utility command along with mysqluc and come out of the mysqluc console. Console commands: mysqluc> help Command Description ----------------------           --------------------------------------------------- help utilities                     Display list of all utilities supported. help <utility>                  Display help for a specific utility. help or help commands   Show this list. exit or quit                       Exit the console. set <variable>=<value>  Store a variable for recall in commands. show options                   Display list of options specified by the user on launch. show variables                 Display list of variables. <ENTER>                       Press ENTER to execute command. <ESCAPE>                     Press ESCAPE to clear the command entry. <DOWN>                       Press DOWN to retrieve the previous command. <UP>                               Press UP to retrieve the next command in history. <TAB>                            Press TAB for type completion of utility, option,or variable names. <TAB><TAB>                Press TAB twice for list of matching type completion (context sensitive). How do I use it? Pre-requisites: - Download the latest version of MySQL Workbench. - Mysql Servers are running. - Your Pythonpath is set. (e.g. Export PYTHONPATH=/...../mysql-utilities/) Check the Version of mysqluc Utility: /usr/bin/python mysqluc.py –version It should display something like this MySQL Utilities mysqluc.py version 1.1.0 - MySQL Workbench Distribution 5.2.44 Copyright (c) 2010, 2012 Oracle and/or its affiliates. All rights reserved. This program is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, to the extent permitted by law. Use of TAB to get the current utilities: mysqluc> mysqldb<TAB><TAB> Utility Description -------------        ------------------------------------------------------------ mysqldbcopy      copy databases from one server to another mysqldbexport    export metadata and data from databases mysqldbimport    import metadata and data from files mysqluc> mysqldbcopy –source=$se<TAB> Variable Value -------- ---------------------------------------------------------------------- server1 root@localhost:3306 server2 root@localhost:3307 you can see the variables starting with se and then decide which to use Run a utility via the console: /usr/bin/python mysqluc.py -e "mysqldbcopy --source=root@localhost:3306 --destination=root@localhost:3307 dbname" Get help for utilities in the console: mysqluc> help utilities Display help for a utility mysqluc> help mysqldbcopy Details about mysqldbcopy and its options set variables and use them in commands: mysqluc> set server1 = root@localhost:3306 mysqluc>show variables Variable Value -------- ---------------------------------------------------------------------- server1    root@localhost:3306 server2    root@localhost:3307 mysqluc> mysqldbcopy –source=$server1 –destination=$server2 dbname <Enter> Mysqldbcopy utility output will display. mysqluc>show options Display list of options specified by the user mysqluc SERVER=root@host123 VAR_A=57 -e "show variables" Variable Value -------- ----------------------------------------------------------------- SERVER root@host123 VAR_A 57 Finding option names for an Utility: mysqluc> mysqlserverclone --n Option Description ------------------- --------------------------------------------------------- --new-data=NEW_DATA the full path to the location of the data directory for the new instance --new-port=NEW_PORT the new port for the new instance - default=3307 --new-id=NEW_ID the server_id for the new instance - default=2 Limitations: User defined variables have a lifetime of the console run time.

  Read the article

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• UIViewController presentModalViewController: animated: doing nothing?

  - by ryyst

  Hi, I recently started a project, using Apple's Utility Application example project. In the example project, there's an info button that shows an instance of FlipSideView. If you know the Weather.app, you know what the button acts like. I then changed the MainWindow.xib to contain a scrollview in the middle of the window and a page-control view at the bottom of the window (again, like the Weather.app). The scrollview gets filled with instances of MainView. When I then clicked the info button, the FlipSideView would show, but only in the area that was previously filled by the MainView instance – this means that the page-control view on the bottom of the page still showed when the FlipSideView instance got loaded. So, I thought that I would simply add a UIViewController for the top-most window, which is the one declared inside the AppDelegate created along side with the project. So, I created a subclass of UIViewController, put an instance of it inside MainWindow.xib and connected it's view outlet to the UIWindow declared as window inside the app delegate. I also changed the button's action, so that it know sends a message to the MainWindowController instance. The message does get sent (I checked with NSLog() statements), but the FlipSideView doesn't get shown. Here's the relevant (?) code: FlipsideViewController *controller = [[FlipsideViewController alloc] initWithNibName:@"FlipsideView" bundle:nil]; controller.delegate = self; controller.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal; [self presentModalViewController:controller animated:YES]; [controller release]; Why's this not working? I've uploaded the entire project here for you to be able to see the whole thing. Thanks for help! -- Ry

  Read the article

• Overlay WPF controls

  - by sandy

  Hello I've written an 'auto-suggest' textbox user control in WPF. It behaves a little bit like the 'To' list in Hotmail, allowing the user to enter a list of items, offering suggestions when it is able. The main controls are a a text box, a wrap panel and a list box. The text box captures user input. The wrap panel contains the text box and shows previous entries. The list box is used to show suggestions. Most of the time, the list box is hidden. I'm using multiple instances of my control in a stack panel. My problem is that when the list box is shown, it is included in the measurement of the height of the control. This forces the following controls in the stack panel to be shifted down, as these pictures demonstrate: I've tried overriding the measurement of my control so not to include the list box, but this just results in the list box not being visible. What I want to do is make the list box overlay any subsequent controls in the stack panel, like a combo box's drop down would do. However, I really don't know how to do this. Any ideas? Thanks Sandy

  Read the article

• ASPNET MVC - Override Html.TextBoxFor(model.property) with a new helper with same signature?

  - by JK

  I want to override Html.TextBoxFor() with my own helper that has the exact same signature (but a different namespace of course) - is this possible, and if so, how? The reason for this is that I have 100+ views in an already existing app, and I want to change the behaviour of TextBoxFor so that it outputs a maxLength=n attribute if the property has a [StringLength(n)] annotation. The code for automatically outputting maxlength=n is in this question: http://stackoverflow.com/questions/2386365/maxlength-attribute-of-a-text-box-from-the-dataannotations-stringlength-in-mvc2. But my question is not a duplicate - I am trying creating a more generic solution: where the DataAnnotaion flows into the html automatically without any need for additional code by the person writing the view. In the referenced question, you have to change every single Html.TexBoxFor to a Html.CustomTextBoxFor. I need to do it so that the existing TextBoxFor()'s do not need to be changed - hence creating a helper with the same signature: change the behaviour of the helper method, and all existing instances will just work without any changes (100+ views, at least 500 TextBoxFor()s - don't want to manually edit that). I tried this code: (And I need to repeat it for each overload of TextBoxFor, but once the root problem is solved, that will be trivial) namespace My.Helpers { public static class CustomTextBoxHelper { public static MvcHtmlString TextBoxFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, object htmlAttributes, bool includeLengthIfAnnotated) { // implementation here } } } But I am getting a compiler error in the view on Html.TextBoxFor(): "The call is ambiguous between the following methods or properties" (of course). Is there any way to do this? Is there an alternative approach that would allow me to change the behaviour of Html.TextBoxFor, so that the views that already use it do not need to be changed?

  Read the article

• Flash AS3: (VideoEvent.COMPLETE, completePlay) - listener is triggered before video is completed

  - by Tevi

  Hello, I have a flash video using the standard FLV Playback component that comes with Flash. I'm using ActionScript 3 to modify the appearance and set up an event listener. I've set it up to go to a new URL using "externalInterface" when the video completes play. The URL is set in a variable using SWFObject. On only a few instances (3 people out of 50 - tested using Amazon Turk), people reported being taken directly to the new url, before the video even started playing. It's difficult to repeat the issue, but it did happen to me once. It doesn't have anything to do with cache, since it has been reported on people going to the url for the first time. Here's the url to the video: http://www.partstown.com/is-bin/INTERSHOP.enfinity/WFS/Reedy-PartsTown-Site/en_US/-/USD/ViewStaticPage-UnFramed?page=tourthetown Here's the code: import flash.external.*; import fl.video.*; var myVideo:FLVPlayback = new FLVPlayback(); var theUrl:String = this.loaderInfo.parameters.urlName; var theScript:String = this.loaderInfo.parameters.scriptName; myVideo.source = this.loaderInfo.parameters.videoPath;//"partstown.flv"; myVideo.skin = this.loaderInfo.parameters.skinPath;//"SkinUnderPlayStopSeekMuteVol.swf" myVideo.skinBackgroundColor = 0xAEBEFB; myVideo.skinBackgroundAlpha = 0.5; myVideo.width = 939; myVideo.height = 660; myVideo.addEventListener(VideoEvent.COMPLETE, completePlay); function completePlay(e:VideoEvent):void { myVideo.alpha=0.2; ExternalInterface.call(theScript); } addChild(myVideo); Why would the listener be triggered before the event complete? How can I fix it? Thanks!

  Read the article

• How to remove FacesMessages from the FacesContext?

  - by gurupriyan.e

  In my screen, I have a drop down(select box), on selection of any of the options in that drop down , i display one or more text boxes beside the select box using javascript/css - display:none and display:block. All these input controls are in the same jsf form. Each of the input controls have their own validator. The problem is suppose the user selects from selection box and doesn't input value or inputs a wrong value for , i add a custom FacesMessage in the Validator and is shown appropriately and suppose the user selects the the second time and inputs the wrong value for the then another FacesMessage is added in the validator. But Now both the Messages are shown - means - the message for and - which is wrong My assumption is that , this happens because they exist in the same form and their instances are not destroyed yet in the FacesContext and in the UIView. I decided to delete the messages this way Iterator<FacesMessage> msgIterator = FacesContext.getCurrentInstance().getMessages(); while(msgIterator.hasNext()) { msgIterator.next(); msgIterator.remove(); } But this sometimes gives java.util.NoSuchElementException org.apache.myfaces.shared_impl.renderkit.html.HtmlMessagesRendererBase$MessagesIterator.next So 2 questions : 1) What is the problem in deleting the FacesMessages this way? I am using myfaces-api-1.2.3.jar and myfaces-impl-1.2.3.jar 2) Is there a better approach to handle my scenario? I only want to show relevent messages every time a jsf request is processed Thanks

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >