Search Results

Search found 4153 results on 167 pages for 'bundle identifier'.

Page 151/167 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• Mpd as pppoe server with authorisation by freeradius2

  - by Korjavin Ivan

  I install freeradius2, add to raddb/users: test Cleartext-Password := "test1" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 10.36.0.2, Framed-IP-Netmask = 255.255.255.0, start radiusd, and check auth: radtest test test1 127.0.0.1 1002 testing123 Sending Access-Request of id 199 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test1" NAS-IP-Address = 127.0.0.1 NAS-Port = 1002 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=199, length=44 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 10.36.0.2 Framed-IP-Netmask = 255.255.255.0 Works fine. Next step. Add to mpd.conf: radius: set auth disable internal set auth max-logins 1 CI set auth enable radius-auth set radius timeout 90 set radius retries 2 set radius server 127.0.0.1 testing123 1812 1813 set radius me 127.0.0.1 create link template L pppoe set link action bundle B set link max-children 1000 set link no multilink set link no shortseq set link no pap chap-md5 chap-msv1 chap-msv2 set link enable chap set pppoe acname Internet load radius create link template em1 L set pppoe iface em1 set link enable incoming And trying to connect, auth failed, here is mpd log: mpd: [em1-2] LCP: auth: peer wants nothing, I want CHAP mpd: [em1-2] CHAP: sending CHALLENGE #1 len: 21 mpd: [em1-2] LCP: LayerUp mpd: [em1-2] CHAP: rec'd RESPONSE #1 len: 58 mpd: [em1-2] Name: "test" mpd: [em1-2] AUTH: Trying RADIUS mpd: [em1-2] RADIUS: Authenticating user 'test' mpd: [em1-2] RADIUS: Rec'd RAD_ACCESS_REJECT for user 'test' mpd: [em1-2] AUTH: RADIUS returned: failed mpd: [em1-2] AUTH: ran out of backends mpd: [em1-2] CHAP: Auth return status: failed mpd: [em1-2] CHAP: Reply message: ^AE=691 R=1 mpd: [em1-2] CHAP: sending FAILURE #1 len: 14 mpd: [em1-2] LCP: authorization failed Then i start freeradius as radiusd -fX, and get this log: rad_recv: Access-Request packet from host 127.0.0.1 port 46400, id=223, length=282 NAS-Identifier = "rubin.svyaz-nt.ru" NAS-IP-Address = 127.0.0.1 Message-Authenticator = 0x14d36639bed8074ec2988118125367ea Acct-Session-Id = "815965-em1-2" NAS-Port = 2 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "00e05290b3e3 / 00:e0:52:90:b3:e3 / em1" NAS-Port-Id = "em1" Vendor-12341-Attr-12 = 0x656d312d32 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Client-Endpoint:0 = "00:e0:52:90:b3:e3" User-Name = "test" MS-CHAP-Challenge = 0xbb1e68d5bbc30f228725a133877de83e MS-CHAP2-Response = 0x010088746ae65b68e435e9d045ad6f9569b60000000000000000b56991b4f20704cb6c68e5982eec5e98a7f4b470c109c1b9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok Found Auth-Type = MSCHAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test] (from client localhost port 2 cli 00e05290b3e3 / 00:e0:52:90:b3:e3 / em1) Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 223 to 127.0.0.1 port 46400 MS-CHAP-Error = "\001E=691 R=1" Why i have error "[mschap] No Cleartext-Password configured. Cannot create LM-Password." ? I define cleartext-password in users. I check raddb/sites-enabled/default authorize { chap mschap eap { ok = return } files } looks ok for me. Whats wrong with mpd/chap/radius ?

  Read the article

• Have I pushed the limits of my current VPS or is there room for optimization?

  - by JRameau

  I am currently on a mediatemple DV server (basic) 512mb dedicated ram, this is a CentOS based VPS with Plesk and Virtuozzo. My experience with it from day 1 has been bad and I only could sooth my server issues with several caching "Band-aids," but my sites are not as small as they were a year ago either so the issues have worsen. I have 3 Drupal installs running on separate (plesk) domains, 1 of those drupal installs is a multisite, that consists of 5-6 sites 2 of those sites are bringing in actual traffic. Those caching "Band-aids" I mentioned are APC, which seemed to help alot initially, and Drupal's Boost, which is considered a poorman's Varnish, it makes all my pages static for anonymous users. Last 30day combined estimate on Google Ananlytics: 90k visitors 260k pageviews. Issue: alot of downtime, I am continually checking if my sites are up, and lately I have been finding it down more than 3 times daily. Restarting Apache will bring it back up, for some time. I have google search every error message and looked up ways to optimize my DV server, and I am beyond stump what is my next move. Is this server bad, have I hit a impossibly low restriction such as the 12mb kernel memory barrier (kmemsize), is it on my end, do I need to optimize some more? *I have provided as much information as I can below, any help or suggestions given will be appreciated Common Error messages I see in the log: [error] (12)Cannot allocate memory: fork: Unable to fork new process [error] make_obcallback: could not import mod_python.apache.\n Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 21, in ? import traceback File "/usr/lib/python2.4/traceback.py", line 3, in ? import linecache ImportError: No module named linecache [error] python_handler: no interpreter callback found. [warn-phpd] mmap cache can't open /var/www/vhosts/***/httpdocs/*** - Too many open files in system (pid ***) [alert] Child 8125 returned a Fatal error... Apache is exiting! [emerg] (43)Identifier removed: couldn't grab the accept mutex [emerg] (22)Invalid argument: couldn't release the accept mutex cat /proc/user_beancounters: Version: 2.5 uid resource held maxheld barrier limit failcnt 41548: kmemsize 4582652 5306699 12288832 13517715 21105036 lockedpages 0 0 600 600 0 privvmpages 38151 42676 229036 249036 0 shmpages 16274 16274 17237 17237 2 dummy 0 0 0 0 0 numproc 43 46 300 300 0 physpages 27260 29528 0 2147483647 0 vmguarpages 0 0 131072 2147483647 0 oomguarpages 27270 29538 131072 2147483647 0 numtcpsock 21 29 300 300 0 numflock 8 8 480 528 0 numpty 1 1 30 30 0 numsiginfo 0 1 1024 1024 0 tcpsndbuf 648440 675272 2867477 4096277 1711499 tcprcvbuf 301620 359716 2867477 4096277 0 othersockbuf 4472 4472 1433738 2662538 0 dgramrcvbuf 0 0 1433738 1433738 0 numothersock 12 12 300 300 0 dcachesize 0 0 2684271 2764800 0 numfile 3447 3496 6300 6300 3872 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 14 14 200 200 0 TOP: (In January the load avg was really high 3-10, I was able to bring it down where it is currently is by giving APC more memory play around with) top - 16:46:07 up 2:13, 1 user, load average: 0.34, 0.20, 0.20 Tasks: 40 total, 2 running, 37 sleeping, 0 stopped, 1 zombie Cpu(s): 0.3% us, 0.1% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 916144k total, 156668k used, 759476k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached MySQLTuner: (after optimizing every table and repairing any table with overage I got the fragmented count down to 86) [--] Data in MyISAM tables: 285M (Tables: 1105) [!!] Total fragmented tables: 86 [--] Up for: 2h 44m 38s (409K q [41.421 qps], 6K conn, TX: 1B, RX: 174M) [--] Reads / Writes: 79% / 21% [--] Total buffers: 58.0M global + 2.7M per thread (100 max threads) [!!] Query cache prunes per day: 675307 [!!] Temporary tables created on disk: 35% (7K on disk / 20K total)

  Read the article

• Where's the Swap File/Partition?

  - by chrisbunney

  I'm investigating the virtual memory configuration of a Debian based Amazon EC2 instance, and as my background isn't in system admin, I'm slightly confused by what I'm seeing. We're using MongoDB, and the monitoring server we have indicates that the Mongo process is using about 20GB of swap space, however I can't figure out where this is located on the server. As far as I can tell from using the various suggested methods from Google, there is either a much smaller amount, or none at all. top indicates that there is 1.8GB of swap memory: top - 15:35:21 up 6 days, 3:23, 1 user, load average: 1.60, 1.43, 1.37 Tasks: 47 total, 2 running, 45 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 14.7%id, 83.8%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 3928924k total, 2855572k used, 1073352k free, 640564k buffers Swap: 0k total, 0k used, 0k free, 1887788k cached swapon -s doesn't seem to think there's any swap space: Filename Type Size Used Priority free -m doesn't think there's any swap either: total used free shared buffers cached Mem: 3836 3663 172 0 626 2701 -/+ buffers/cache: 336 3500 Swap: 0 0 0 And neither does vmstat: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 3 0 66224 641372 2874744 0 0 21 5012 21 33 2 2 76 19 But cat /etc/fstab thinks there is a swap partition: /dev/xvda1 / ext3 defaults 1 1 /dev/xvda2 /mnt ext3 defaults 0 0 /dev/xvda3 swap swap defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 However df -k gives no indication of the xvda3 partition: Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 16513960 15675324 0 100% / tmpfs 1964460 8 1964452 1% /lib/init/rw udev 1914148 28 1914120 1% /dev tmpfs 1964460 4 1964456 1% /dev/shm So I really don't know what to make of this, because I appear to have a process using about 10 times more virtual memory than what might be available, and I have no idea where this virtual memory is on the system. I'm probably misinterpreting the output of the tools, so I'd be grateful if someone would be able to set me straight: What have I got wrong, what's the right interpretation, and how do you reach that interpretation? EDIT0: We use 10gen's MMS for monitoring the database, the relevant section for memory from the last data point is: "mem": { "virtual": 20749, "bits": 64, "supported": true, "mappedWithJournal": 20376, "mapped": 10188, "resident": 1219 }, This JSON is specific to the database process (I believe) rather than the system as a whole. fdisk -l /dev/xvda outputs... nothing? I tried each of the 3 xvda entries in /etc/fstab as well: root@ip:~# fdisk -l /dev/xvda1 Disk /dev/xvda1: 34.4 GB, 34359738368 bytes 255 heads, 63 sectors/track, 4177 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table root@ip:~# fdisk -l /dev/xvda2 root@ip:~# fdisk -l /dev/xvda3 root@ip:~# Edit1: Output of cat /proc/meminfo for the sake of completeness: MemTotal: 3928924 kB MemFree: 726600 kB Buffers: 648368 kB Cached: 2216556 kB SwapCached: 0 kB Active: 1945100 kB Inactive: 994016 kB Active(anon): 60476 kB Inactive(anon): 12952 kB Active(file): 1884624 kB Inactive(file): 981064 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 387180 kB Writeback: 0 kB AnonPages: 73380 kB Mapped: 1188260 kB Shmem: 48 kB Slab: 149768 kB SReclaimable: 146076 kB SUnreclaim: 3692 kB KernelStack: 1104 kB PageTables: 16096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1964460 kB Committed_AS: 305572 kB VmallocTotal: 34359738367 kB VmallocUsed: 16760 kB VmallocChunk: 34359721448 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 3932160 kB DirectMap2M: 0 kB

  Read the article

• PHP install sqlite3 extension

  - by Kevin

  We are using PHP 5.3.6 here, but we used the --without-sqlite3 command when compiling PHP. (It stands in the 'Configure Command' column). But, it is very risky to recompile PHP on that server; there are many visitors. How can we install/use sqlite3? Regards, Kevin [EDIT] yum repolist gives: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * extras: mirror.nl.leaseweb.net * updates: mirror.nl.leaseweb.net repo id repo name status base CentOS-5 - Base 3,566 extras CentOS-5 - Extras 237 updates CentOS-5 - Updates 376 repolist: 4,179 rpm -qa | grep php gives: php-pdo-5.3.6-1.w5 php-mysql-5.3.6-1.w5 psa-php5-configurator-1.5.3-cos5.build95101022.10 php-mbstring-5.3.6-1.w5 php-imap-5.3.6-1.w5 php-cli-5.3.6-1.w5 php-gd-5.3.6-1.w5 php-5.3.6-1.w5 php-common-5.3.6-1.w5 php-xml-5.3.6-1.w5 php -i | grep sqlite gives: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/sqlite3.so' - /usr/lib64/php/modules/sqlite3.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configure Command => './configure' '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=lib64' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--with-xpm-dir=/usr' '--enable-gd-native-ttf' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-pcre-regex=/usr' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--with-kerberos' '--enable-ucd-snmp-hack' '--enable-shmop' '--enable-calendar' '--without-mime-magic' '--without-sqlite' '--without-sqlite3' '--with-libxml-dir=/usr' '--enable-xml' '--with-system-tzdata' '--enable-force-cgi-redirect' '--enable-pcntl' '--with-imap=shared' '--with-imap-ssl' '--enable-mbstring=shared' '--enable-mbregex' '--with-gd=shared' '--enable-bcmath=shared' '--enable-dba=shared' '--with-db4=/usr' '--with-xmlrpc=shared' '--with-ldap=shared' '--with-ldap-sasl' '--with-mysql=shared,/usr' '--with-mysqli=shared,/usr/bin/mysql_config' '--enable-dom=shared' '--with-pgsql=shared' '--enable-wddx=shared' '--with-snmp=shared,/usr' '--enable-soap=shared' '--with-xsl=shared,/usr' '--enable-xmlreader=shared' '--enable-xmlwriter=shared' '--with-curl=shared,/usr' '--enable-fastcgi' '--enable-pdo=shared' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-pdo-mysql=shared,/usr' '--with-pdo-pgsql=shared,/usr' '--with-pdo-sqlite=shared,/usr' '--with-pdo-dblib=shared,/usr' '--enable-json=shared' '--enable-zip=shared' '--with-readline' '--with-pspell=shared' '--enable-phar=shared' '--with-mcrypt=shared,/usr' '--with-tidy=shared,/usr' '--with-mssql=shared,/usr' '--enable-sysvmsg=shared' '--enable-sysvshm=shared' '--enable-sysvsem=shared' '--enable-posix=shared' '--with-unixODBC=shared,/usr' '--enable-fileinfo=shared' '--enable-intl=shared' '--with-icu-dir=/usr' '--with-recode=shared,/usr' /etc/php.d/pdo_sqlite.ini, /etc/php.d/sqlite3.ini, PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CET/1.0/no DST' instead in Unknown on line 0 PDO drivers => mysql, sqlite pdo_sqlite PWD => /root/sqlite _SERVER["PWD"] => /root/sqlite _ENV["PWD"] => /root/sqlite

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• Magento hosting on a budget

  - by spa

  I have to do a setup for Magento. My constraint is primarily ease of setup and fault tolerance/fail over. Furthermore costs are an issue. I have three identical physical servers to get the job done. Each server node has an i7 quad core, 16GB RAM, and 2x3TB HD in a software RAID 1 configuration. Each node runs Ubuntu 12.04. right now. I have an additional IP address which can be routed to any of these nodes. The Magento shop has max. 1000 products, 50% of it are bundle products. I would estimate that max. 100 users are active at once. This leads me to the conclusion, that performance is not top priority here. My first setup idea One node (lb) runs nginx as a load balancer. The additional IP is used with domain name and routed to this node by default. Nginx distributes the load equally to the other two nodes (shop1, shop2). Shop1 and shop2 are configured equally: each server runs Apache2 and MySQL. The Mysqls are configured with master/slave replication. My failover strategy: Lb fails = Route IP to shop1 (MySQL master), continue. Shop1 fails = Lb will handle that automatically, promote MySQL slave on shop2 to master, reconfigure Magento to use shop2 for writes, continue. Shop2 fails = Lb will handle that automatically, continue. Is this a sane strategy? Has anyone done a similar setup with Magento? My second setup idea Another way to do it would be to use drbd for storing the MySQL data files on shop1 and shop2. I understand that in this scenario only one node/MySQL instance can be active and the other is used as hot standby. So in case shop1 fails, I would start up MySQL on shop2, route the IP to shop2, and continue. I like that as the MySQL setup is easier and the nodes can be configured 99% identical. So in this case the load balancer becomes useless and I have a spare server. My third setup idea The third way might be master-master replication of MySQL databases. However, in my optinion this might be tricky, as Magento isn't build for this scenario (e.g. conflicting ids for new rows). I would not do that until I have heard of a working example. Could you give me an advice which route to follow? There seems not one "good" way to do it. E.g. I read blog posts which describe a MySQL master/slave setup for Magento, but elsewhere I read, that data might get duplicated when the slave lags behind the master (e.g. when an order is placed, a customer might get created twice). I'm kind of lost here.

  Read the article

• Cheapest way to connect 20-24 Sata II HDDs in a budget storage server?

  - by Joe Hopfgartner

  I need to assemble a high density storage server for as cheap as possible. It's been a while for me and the last systems I integrated didn't even have Sata yet... During my Research I of course stumbled about Nexsan SATA Beast, the BackBlaze storage Pods as well as some ridiculously overpriced HP Proliant or Dell storage solutions. Finally I choose Norco cases as the way to go. My eye is set on the RPC-4020, which is a 4U 19" Rackmount case with 20 Hot Swap 3.5" SATA/SAS Hdd trays (Backplanes included) and room for two 2.5" OS drives as well as a Slim Line CD-Rom. The backplanes connect with a single SATA port for each drive, so there are 20 internal SATA ports to to be connected. They also have redundant power ports which I think is quite nice. The cheapest price I have found is 290$ + 40$ shipping. In europe the cheapest unfortunately is 370€ (500$) + 40 € shipping... A nice alternative would be the RPC-4224 which has SFF-8087 Mini SAS connectors that bundle 4 SATA trays each. But it doesn't seem to be available in Europe (where i am) anywhere. So here comes my problem: What Mainboard/Controller to choose to connect them for as cheap as possible while still having nice data rates? I have to say that the server is intended as a Storage server with 1gps connectivity and the data transfer will be distributed very evenly across all drives. I also don't require any raid functionality. This is all done at application level, I just need JBOD. So for example if I go for the RPC 4020 Model I need to connect 20 Storage + 1 OS + 1 CDROM Sata ports. I searched a bit and stumbled across this very low priced controller: http://www.intel.com/products/server/raid-controllers/SASWT4I/SASWT4I-overview.htm They sell it for 115 € here and the specs say it can control up to 122 hard discs and has 4 Mini SAS connectors. So I would use 4 Mini SAS 36pin - 4 SATA 7pin cables to connect 4 SATA drives to each port and choose a Mainboard taht has 6 SATA on board (for example this one) and hurray, I can connect my 22 SATA devices for as low as about ~ 220 EUR (cpu, ram, psu, case not counted) Question: WOULD THAT WORK? And if not, why? 2nd Question: If I go for the 4220 or 4224 Model, I have internal Mini SAS connectors. Am I right in assuming that the backplane than acts as a "SAS Expander"? And can I just plug these SAS connectors into any SAS port I can find on my controller / mainboard or are there certain requirements? I know that SATA port multipliers only work with controllers that are ready for that. But isn't this expansion already implemented in the SAS standard? I am sorry that this is a very broad question, but I really spent the last week reading up and it seems to be not so clear! Especially all the controlling hardware specifications! 3rd Question: A lot of hardware specs feature "internal channels" and "internal connectors". The connecors are the physical numbers of places where I can plug a cable in. I got that. But are the "internal channels" always the maximum numbers of physical drives that can be used in the end? Or can I enhance this further by Expanders/Fanouts? 4th and last question: What do you think about the setup so far? Do you know any good alternatives? Maby I am completely going the wrong way and some DAS would be way better? Are there any comparable chassis available in europe? Please feel free to say whatever you think is relevant to the subject!

  Read the article

• what is the best mid/high-end class audio/music creation audio sound card?

  - by Chris

  Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

  Read the article

• Cannot open simple script application on mac

  - by streetpc

  Mac OS X 10.6 I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: Is there some kind of validity caching for applications ? based on what ? how do I flush it ? Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• Unicorn installation error on Debian 5

  - by Luc

  I am running ruby1.9 on Debian 5, and did not manage to install 'unicorn' with rubygems. I got this error and do not really know how to solve it. Do you have any idea of the possible root cause ? > gem install unicorn Building native extensions. This could take a while... ERROR: Error installing unicorn: ERROR: Failed to build gem native extension. /usr/bin/ruby1.9 extconf.rb checking for CLOCK_MONOTONIC in time.h... yes checking for clockid_t in time.h... yes checking for clock_gettime() in -lrt... yes checking for t_open() in -lnsl... no checking for socket() in -lsocket... no checking for poll() in poll.h... yes checking for getaddrinfo() in sys/types.h,sys/socket.h,netdb.h... yes checking for getnameinfo() in sys/types.h,sys/socket.h,netdb.h... yes checking for struct sockaddr_storage in sys/types.h,sys/socket.h... yes checking for accept4() in sys/socket.h... no checking for sys/select.h... yes checking for ruby/io.h... yes checking for rb_io_t.fd in ruby.h,ruby/io.h... yes checking for rb_io_t.mode in ruby.h,ruby/io.h... yes checking for rb_io_t.pathv in ruby.h,ruby/io.h... no checking for struct RFile in ruby.h,ruby/io.h... yes checking size of struct RFile in ruby.h,ruby/io.h... 24 checking for struct RObject... no checking size of int... 4 checking for rb_io_ascii8bit_binmode()... no checking for rb_thread_blocking_region()... yes checking for rb_thread_io_blocking_region()... no checking for rb_str_set_len()... yes checking for rb_time_interval()... yes checking for rb_wait_for_single_fd()... no creating Makefile make cc -I. -I/usr/include/ruby-1.9.0/x86_64-linux -I/usr/include/ruby-1.9.0 -I. -DHAVE_TYPE_CLOCKID_T -DHAVE_POLL -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -DHAVE_TYPE_STRUCT_SOCKADDR_STORAGE -DHAVE_SYS_SELECT_H -DHAVE_RUBY_IO_H -DHAVE_RB_IO_T_FD -DHAVE_ST_FD -DHAVE_RB_IO_T_MODE -DHAVE_ST_MODE -DHAVE_TYPE_STRUCT_RFILE -DSIZEOF_STRUCT_RFILE=24 -DSIZEOF_INT=4 -DHAVE_RB_THREAD_BLOCKING_REGION -DHAVE_RB_STR_SET_LEN -DHAVE_RB_TIME_INTERVAL -D_GNU_SOURCE -DPOSIX_C_SOURCE=1-D_POSIX_C_SOURCE=200112L -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -o kgio_ext.o -c kgio_ext.c cc -I. -I/usr/include/ruby-1.9.0/x86_64-linux -I/usr/include/ruby-1.9.0 -I. -DHAVE_TYPE_CLOCKID_T -DHAVE_POLL -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -DHAVE_TYPE_STRUCT_SOCKADDR_STORAGE -DHAVE_SYS_SELECT_H -DHAVE_RUBY_IO_H -DHAVE_RB_IO_T_FD -DHAVE_ST_FD -DHAVE_RB_IO_T_MODE -DHAVE_ST_MODE -DHAVE_TYPE_STRUCT_RFILE -DSIZEOF_STRUCT_RFILE=24 -DSIZEOF_INT=4 -DHAVE_RB_THREAD_BLOCKING_REGION -DHAVE_RB_STR_SET_LEN -DHAVE_RB_TIME_INTERVAL -D_GNU_SOURCE -DPOSIX_C_SOURCE=1-D_POSIX_C_SOURCE=200112L -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -o autopush.o -c autopush.c cc -I. -I/usr/include/ruby-1.9.0/x86_64-linux -I/usr/include/ruby-1.9.0 -I. -DHAVE_TYPE_CLOCKID_T -DHAVE_POLL -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -DHAVE_TYPE_STRUCT_SOCKADDR_STORAGE -DHAVE_SYS_SELECT_H -DHAVE_RUBY_IO_H -DHAVE_RB_IO_T_FD -DHAVE_ST_FD -DHAVE_RB_IO_T_MODE -DHAVE_ST_MODE -DHAVE_TYPE_STRUCT_RFILE -DSIZEOF_STRUCT_RFILE=24 -DSIZEOF_INT=4 -DHAVE_RB_THREAD_BLOCKING_REGION -DHAVE_RB_STR_SET_LEN -DHAVE_RB_TIME_INTERVAL -D_GNU_SOURCE -DPOSIX_C_SOURCE=1-D_POSIX_C_SOURCE=200112L -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -o wait.o -c wait.c cc -I. -I/usr/include/ruby-1.9.0/x86_64-linux -I/usr/include/ruby-1.9.0 -I. -DHAVE_TYPE_CLOCKID_T -DHAVE_POLL -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -DHAVE_TYPE_STRUCT_SOCKADDR_STORAGE -DHAVE_SYS_SELECT_H -DHAVE_RUBY_IO_H -DHAVE_RB_IO_T_FD -DHAVE_ST_FD -DHAVE_RB_IO_T_MODE -DHAVE_ST_MODE -DHAVE_TYPE_STRUCT_RFILE -DSIZEOF_STRUCT_RFILE=24 -DSIZEOF_INT=4 -DHAVE_RB_THREAD_BLOCKING_REGION -DHAVE_RB_STR_SET_LEN -DHAVE_RB_TIME_INTERVAL -D_GNU_SOURCE -DPOSIX_C_SOURCE=1-D_POSIX_C_SOURCE=200112L -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -o connect.o -c connect.c cc -I. -I/usr/include/ruby-1.9.0/x86_64-linux -I/usr/include/ruby-1.9.0 -I. -DHAVE_TYPE_CLOCKID_T -DHAVE_POLL -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -DHAVE_TYPE_STRUCT_SOCKADDR_STORAGE -DHAVE_SYS_SELECT_H -DHAVE_RUBY_IO_H -DHAVE_RB_IO_T_FD -DHAVE_ST_FD -DHAVE_RB_IO_T_MODE -DHAVE_ST_MODE -DHAVE_TYPE_STRUCT_RFILE -DSIZEOF_STRUCT_RFILE=24 -DSIZEOF_INT=4 -DHAVE_RB_THREAD_BLOCKING_REGION -DHAVE_RB_STR_SET_LEN -DHAVE_RB_TIME_INTERVAL -D_GNU_SOURCE -DPOSIX_C_SOURCE=1-D_POSIX_C_SOURCE=200112L -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -o poll.o -c poll.c poll.c:11:18: error: st.h: No such file or directory poll.c: In function 'do_poll': poll.c:148: error: 'RUBY_UBF_IO' undeclared (first use in this function) poll.c:148: error: (Each undeclared identifier is reported only once poll.c:148: error: for each function it appears in.) make: *** [poll.o] Error 1 Gem files will remain installed in /usr/lib/ruby/gems/1.9.0/gems/kgio-2.5.0 for inspection. Results logged to /usr/lib/ruby/gems/1.9.0/gems/kgio-2.5.0/ext/kgio/gem_make.out

  Read the article

• Configuring dhcp module in FreeRadius (3.0.2 - Centos 6.5)

  - by mixja

  I am using the REST module to authorise a DHCP request. I would like to send an explicit DHCP NAK if the authorisation fails, however the DHCP module seems to return immediately if there is a failure and just ignores the DHCP request without any response. Here is my DHCP module configuration - if rest.authorize is successful, the if (ok) control block is hit, but if rest.authorize fails the if (fail) is never hit. dhcp DHCP-Discover { rest.authorize if (fail) { update reply { DHCP-Message-Type = DHCP-Nak } } if (ok) { update reply { DHCP-Message-Type = DHCP-Offer } update reply { DHCP-Domain-Name-Server = x.x.x.x DHCP-Domain-Name-Server = x.x.x.x DHCP-Subnet-Mask = 255.255.255.0 DHCP-Router-Address = x.x.x.x DHCP-IP-Address-Lease-Time = 3600 DHCP-DHCP-Server-Identifier = x.x.x.x } mac2ip } } Below is the output after a 401 Unauthorized is received. I am wanting to achieve a temporary block on DHCP for a specified (small) period of time. However the FreeRADIUS behaviour is to ignore duplicate requests for same DHCP transaction, meaning DHCP on client is blocked until it begins a new transaction. If a DHCP NAK can be sent, the DHCP client will initiate a new transaction after each NAK (i.e. DHCP Discover), meaning FreeRADIUS will process each DHCP Discover from the client, and the block will be removed much closer to the desired block time. Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Sending HTTP GET to "http://xxxxxx//api/v1/dhcp/80%3Aea%3A96%3A2a%3Ab6%3Aaa" Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Processing response header Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Status : 401 (Unauthorized) Tue Jun 3 03:00:57 2014 : Debug: (3) rest : Skipping attribute processing, no body data received Tue Jun 3 03:00:57 2014 : Debug: rlm_rest (rest): Released connection (4) Tue Jun 3 03:00:57 2014 : Debug: (3) modsingle[authorize]: returned from rest (rlm_rest) for request 3 Tue Jun 3 03:00:57 2014 : Debug: (3) [rest.authorize] = fail Tue Jun 3 03:00:57 2014 : Debug: (3) } # dhcp DHCP-Discover = fail Tue Jun 3 03:00:57 2014 : Debug: (3) Finished request 3. Tue Jun 3 03:00:57 2014 : Debug: Waking up in 0.2 seconds. Tue Jun 3 03:00:58 2014 : Debug: Waking up in 4.6 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:00:59 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:00:59 2014 : Debug: Waking up in 2.9 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:02 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:02 2014 : Debug: Waking up in 0.4 seconds. Tue Jun 3 03:01:02 2014 : Debug: (2) Cleaning up request packet ID 2064626397 with timestamp +56 Tue Jun 3 03:01:02 2014 : Debug: Waking up in 1999991.0 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:06 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:06 2014 : Debug: Waking up in 3999983.1 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:15 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:15 2014 : Debug: Waking up in 7999966.3 seconds. Received DHCP-Discover of id 7b0fb2de from 172.19.0.9:67 to 172.19.0.12:67 Tue Jun 3 03:01:23 2014 : Debug: (3) No reply. Ignoring retransmit. Tue Jun 3 03:01:23 2014 : Debug: Waking up in 15999942.1 seconds.

  Read the article

• Cannot open simplest mac application

  - by streetpc

  I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: * Is there some kind of validity caching for applications ? based on what ? how do I flush it ? * Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• Cannot open simplest script mac application

  - by streetpc

  I created a very simple app, which is only a wrapper of a shell script (so that I can select this script in application selectors, like startup apps). I try to launch it and yesterday it worked, but today I changed the executable script's content and name (with something that perfeclty works in a shell script launched in the Terminal) and it will only display a Finder-iconed dialog saying Cannot open the application because it is not supported on this kind of Mac. I restored the previous script (content/name) but I still get the error! Same when re-bundling the app from scratch, or completely changing the bundle identifier… If I try to open it in the Terminal using open My.app, I get The application cannot be opened because it has an incorrect executable format. But when I executes directly the Contents/MacOS/Script, it allways works (iwth both contents). Also, it is displayed with correct icon and meta-information in the Finder (so I guess the Info.plist is understood). The app's file tree is: Contents/ Info.plist MacOS/ Script (executable bit set, works when launched directly) PkgInfo Resources/ AppIcon.icns Here is the Info.plist content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleExecutable</key> <string>Script</string> <key>CFBundleIconFile</key> <string>AppIcon</string> <key>CFBundleIdentifier</key> <string>asdf.ScriptApp</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>My script</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>1.0</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>1</string> <key>LSMinimumSystemVersion</key> <string>10.4</string> </dict> </plist> And the PkgInfo file only contains APPL????. I tested the Script with a simple echo "ok" and echo "ok" >/tmp/test (plus #!/bin/sh header). So my questions are: Is there some kind of validity caching for applications ? based on what ? how do I flush it ? Where does this message come from ? I tried to google it but all I get is a page talking about 32/64 bits Java…

  Read the article

• Android - creating a custom preferences activity screen

  - by Bill Osuch

  Android applications can maintain their own internal preferences (and allow them to be modified by users) with very little coding. In fact, you don't even need to write an code to explicitly save these preferences, it's all handled automatically! Create a new Android project, with an intial activity title Main. Create two more activities: ShowPrefs, which extends Activity Set Prefs, which extends PreferenceActivity Add these two to your AndroidManifest.xml file: <activity android:name=".SetPrefs"></activity> <activity android:name=".ShowPrefs"></activity> Now we'll work on fleshing out each activity. First, open up the main.xml layout file and add a couple of buttons to it: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"    android:orientation="vertical"    android:layout_width="fill_parent"    android:layout_height="fill_parent"> <Button android:text="Edit Preferences"    android:id="@+id/prefButton"    android:layout_width="wrap_content"    android:layout_height="wrap_content"    android:layout_gravity="center_horizontal"/> <Button android:text="Show Preferences"    android:id="@+id/showButton"    android:layout_width="wrap_content"    android:layout_height="wrap_content"    android:layout_gravity="center_horizontal"/> </LinearLayout> Next, create a couple button listeners in Main.java to handle the clicks and start the other activities: Button editPrefs = (Button) findViewById(R.id.prefButton);       editPrefs.setOnClickListener(new View.OnClickListener() {              public void onClick(View view) {                  Intent myIntent = new Intent(view.getContext(), SetPrefs.class);                  startActivityForResult(myIntent, 0);              }      });           Button showPrefs = (Button) findViewById(R.id.showButton);      showPrefs.setOnClickListener(new View.OnClickListener() {              public void onClick(View view) {                  Intent myIntent = new Intent(view.getContext(), ShowPrefs.class);                  startActivityForResult(myIntent, 0);              }      }); Now, we'll create the actual preferences layout. You'll need to create a file called preferences.xml inside res/xml, and you'll likely have to create the xml directory as well. Add the following xml: <?xml version="1.0" encoding="utf-8"?> <PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android"> </PreferenceScreen> First we'll add a category, which is just a way to group similar preferences... sort of a horizontal bar. Add this inside the PreferenceScreen tags: <PreferenceCategory android:title="First Category"> </PreferenceCategory> Now add a Checkbox and an Edittext box (inside the PreferenceCategory tags): <CheckBoxPreference    android:key="checkboxPref"    android:title="Checkbox Preference"    android:summary="This preference can be true or false"    android:defaultValue="false"/> <EditTextPreference    android:key="editTextPref"    android:title="EditText Preference"    android:summary="This allows you to enter a string"    android:defaultValue="Nothing"/> The key is how you will refer to the preference in code, the title is the large text that will be displayed, and the summary is the smaller text (this will make sense when you see it). Let's say we've got a second group of preferences that apply to a different part of the app. Add a new category just below the first one: <PreferenceCategory android:title="Second Category"> </PreferenceCategory> In there we'll a list with radio buttons, so add: <ListPreference    android:key="listPref"    android:title="List Preference"    android:summary="This preference lets you select an item in a array"    android:entries="@array/listArray"    android:entryValues="@array/listValues" /> When complete, your full xml file should look like this: <?xml version="1.0" encoding="utf-8"?> <PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android">  <PreferenceCategory android:title="First Category"> <CheckBoxPreference    android:key="checkboxPref"    android:title="Checkbox Preference"    android:summary="This preference can be true or false"    android:defaultValue="false"/> <EditTextPreference    android:key="editTextPref"    android:title="EditText Preference"    android:summary="This allows you to enter a string"    android:defaultValue="Nothing"/>  </PreferenceCategory>  <PreferenceCategory android:title="Second Category">   <ListPreference    android:key="listPref"    android:title="List Preference"    android:summary="This preference lets you select an item in a array"    android:entries="@array/listArray"    android:entryValues="@array/listValues" />  </PreferenceCategory> </PreferenceScreen> However, when you try to save it, you'll get an error because you're missing your array definition. To fix this, add a file called arrays.xml in res/values, and paste in the following: <?xml version="1.0" encoding="utf-8"?> <resources>  <string-array name="listArray">      <item>Value 1</item>      <item>Value 2</item>      <item>Value 3</item>  </string-array>  <string-array name="listValues">      <item>1</item>      <item>2</item>      <item>3</item>  </string-array> </resources> Finally (for the preferences screen at least...) add the code that will display the preferences layout to the SetPrefs.java file:  @Override     public void onCreate(Bundle savedInstanceState) {      super.onCreate(savedInstanceState);      addPreferencesFromResource(R.xml.preferences);      } OK, so now we've got an activity that will set preferences, and save them without the need to write custom save code. Let's throw together an activity to work with the saved preferences. Create a new layout called showpreferences.xml and give it three Textviews: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"     android:orientation="vertical"     android:layout_width="fill_parent"     android:layout_height="fill_parent"> <TextView   android:id="@+id/textview1"     android:layout_width="fill_parent"     android:layout_height="wrap_content"     android:text="textview1"/> <TextView   android:id="@+id/textview2"     android:layout_width="fill_parent"     android:layout_height="wrap_content"     android:text="textview2"/> <TextView   android:id="@+id/textview3"     android:layout_width="fill_parent"     android:layout_height="wrap_content"     android:text="textview3"/> </LinearLayout> Open up the ShowPrefs.java file and have it use that layout: setContentView(R.layout.showpreferences); Then add the following code to load the DefaultSharedPreferences and display them: SharedPreferences prefs = PreferenceManager.getDefaultSharedPreferences(this);    TextView text1 = (TextView)findViewById(R.id.textview1); TextView text2 = (TextView)findViewById(R.id.textview2); TextView text3 = (TextView)findViewById(R.id.textview3);    text1.setText(new Boolean(prefs.getBoolean("checkboxPref", false)).toString()); text2.setText(prefs.getString("editTextPref", "<unset>"));; text3.setText(prefs.getString("listPref", "<unset>")); Fire up the application in the emulator and click the Edit Preferences button. Set various things, click the back button, then the Edit Preferences button again. Notice that your choices have been saved.   Now click the Show Preferences button, and you should see the results of what you set:   There are two more preference types that I did not include here: RingtonePreference - shows a radioGroup that lists your ringtones PreferenceScreen - allows you to embed a second preference screen inside the first - it opens up a new set of preferences when clicked

  Read the article

• HttpContext.Items and Server.Transfer/Execute

  - by Rick Strahl

  A few days ago my buddy Ben Jones pointed out that he ran into a bug in the ScriptContainer control in the West Wind Web and Ajax Toolkit. The problem was basically that when a Server.Transfer call was applied the script container (and also various ClientScriptProxy script embedding routines) would potentially fail to load up the specified scripts. It turns out the problem is due to the fact that the various components in the toolkit use request specific singletons via a Current property. I use a static Current property tied to a Context.Items[] entry to handle this type of operation which looks something like this: /// <summary> /// Current instance of this class which should always be used to /// access this object. There are no public constructors to /// ensure the reference is used as a Singleton to further /// ensure that all scripts are written to the same clientscript /// manager. /// </summary> public static ClientScriptProxy Current { get { if (HttpContext.Current == null) return new ClientScriptProxy(); ClientScriptProxy proxy = null; if (HttpContext.Current.Items.Contains(STR_CONTEXTID)) proxy = HttpContext.Current.Items[STR_CONTEXTID] as ClientScriptProxy; else { proxy = new ClientScriptProxy(); HttpContext.Current.Items[STR_CONTEXTID] = proxy; } return proxy; } } The proxy is attached to a Context.Items[] item which makes the instance Request specific. This works perfectly fine in most situations EXCEPT when you’re dealing with Server.Transfer/Execute requests. Server.Transfer doesn’t cause Context.Items to be cleared so both the current transferred request and the original request’s Context.Items collection apply. For the ClientScriptProxy this causes a problem because script references are tracked on a per request basis in Context.Items to check for script duplication. Once a script is rendered an ID is written into the Context collection and so considered ‘rendered’: // No dupes - ref script include only once if (HttpContext.Current.Items.Contains( STR_SCRIPTITEM_IDENTITIFIER + fileId ) ) return; HttpContext.Current.Items.Add(STR_SCRIPTITEM_IDENTITIFIER + fileId, string.Empty); where the fileId is the script name or unique identifier. The problem is on the Transferred page the item will already exist in Context and so fail to render because it thinks the script has already rendered based on the Context item. Bummer. The workaround for this is simple once you know what’s going on, but in this case it was a bitch to track down because the context items are used in many places throughout this class. The trick is to determine when a request is transferred and then removing the specific keys. The first issue is to determine if a script is in a Trransfer or Execute call: if (HttpContext.Current.CurrentHandler != HttpContext.Current.Handler) Context.Handler is the original handler and CurrentHandler is the actual currently executing handler that is running when a Transfer/Execute is active. You can also use Context.PreviousHandler to get the last handler and chain through the whole list of handlers applied if Transfer calls are nested (dog help us all for the person debugging that). For the ClientScriptProxy the full logic to check for a transfer and remove the code looks like this: /// <summary> /// Clears all the request specific context items which are script references /// and the script placement index. /// </summary> public void ClearContextItemsOnTransfer() { if (HttpContext.Current != null) { // Check for Server.Transfer/Execute calls - we need to clear out Context.Items if (HttpContext.Current.CurrentHandler != HttpContext.Current.Handler) { List<string> Keys = HttpContext.Current.Items.Keys.Cast<string>().Where(s => s.StartsWith(STR_SCRIPTITEM_IDENTITIFIER) || s == STR_ScriptResourceIndex).ToList(); foreach (string key in Keys) { HttpContext.Current.Items.Remove(key); } } } } along with a small update to the Current property getter that sets a global flag to indicate whether the request was transferred: if (!proxy.IsTransferred && HttpContext.Current.Handler != HttpContext.Current.CurrentHandler) { proxy.ClearContextItemsOnTransfer(); proxy.IsTransferred = true; } return proxy; I know this is pretty ugly, but it works and it’s actually minimal fuss without affecting the behavior of the rest of the class. Ben had a different solution that involved explicitly clearing out the Context items and replacing the collection with a manually maintained list of items which also works, but required changes through the code to make this work. In hindsight, it would have been better to use a single object that encapsulates all the ‘persisted’ values and store that object in Context instead of all these individual small morsels. Hindsight is always 20/20 though :-}. If possible use Page.Items ClientScriptProxy is a generic component that can be used from anywhere in ASP.NET, so there are various methods that are not Page specific on this component which is why I used Context.Items, rather than the Page.Items collection.Page.Items would be a better choice since it will sidestep the above Server.Transfer nightmares as the Page is reloaded completely and so any new Page gets a new Items collection. No fuss there. So for the ScriptContainer control, which has to live on the page the behavior is a little different. It is attached to Page.Items (since it’s a control): /// <summary> /// Returns a current instance of this control if an instance /// is already loaded on the page. Otherwise a new instance is /// created, added to the Form and returned. /// /// It's important this function is not called too early in the /// page cycle - it should not be called before Page.OnInit(). /// /// This property is the preferred way to get a reference to a /// ScriptContainer control that is either already on a page /// or needs to be created. Controls in particular should always /// use this property. /// </summary> public static ScriptContainer Current { get { // We need a context for this to work! if (HttpContext.Current == null) return null; Page page = HttpContext.Current.CurrentHandler as Page; if (page == null) throw new InvalidOperationException(Resources.ERROR_ScriptContainer_OnlyWorks_With_PageBasedHandlers); ScriptContainer ctl = null; // Retrieve the current instance ctl = page.Items[STR_CONTEXTID] as ScriptContainer; if (ctl != null) return ctl; ctl = new ScriptContainer(); page.Form.Controls.Add(ctl); return ctl; } } The biggest issue with this approach is that you have to explicitly retrieve the page in the static Current property. Notice again the use of CurrentHandler (rather than Handler which was my original implementation) to ensure you get the latest page including the one that Server.Transfer fired. Server.Transfer and Server.Execute are Evil All that said – this fix is probably for the 2 people who are crazy enough to rely on Server.Transfer/Execute. :-} There are so many weird behavior problems with these commands that I avoid them at all costs. I don’t think I have a single application that uses either of these commands… Related Resources Full source of ClientScriptProxy.cs (repository) Part of the West Wind Web Toolkit Static Singletons for ASP.NET Controls Post © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Ops Center Solaris 11 IPS Repository Management: Using ISO Images

  - by S Stelting

  Please join us for a live WebEx presentation of this topic on Tuesday, November 20th at 9am MDT. Details for the call are provided below: https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209834017&UID=1512096072&PW=NYTVlZTYxMzdm&RT=MiMxMQ%3D%3D Meeting password: oracle123 Call-in toll-free number: 1-866-682-4770 International numbers: http://www.intercall.com/oracle/access_numbers.htm Conference Code: 762 9343 # Security Code: 7777 # With Enterprise Manager Ops Center 12c, you can provision, patch, monitor and manage Oracle Solaris 11 instances. To do this, Ops Center creates and maintains a Solaris 11 Image Packaging System (IPS) repository on the Enterprise Controller. During the Enterprise Controller configuration, you can load repository content directly from Oracle's Support Web site and subsequently synchronize the repository as new content becomes available. Of course, you can also use Solaris 11 ISO images to create and update your Ops Center repository. There are a few excellent reasons for doing this: You're running Ops Center in disconnected mode, and don't have Internet access on your Enterprise Controller You'd rather avoid the bandwidth associated with live synchronization of a Solaris 11 package repository This demo will show you how to use Solaris 11 ISO images to set up and update your Ops Center repository. Prerequisites This tip assumes that you've already installed the Enterprise Controller on a Solaris 11 OS instance and that you're ready for post-install configuration. In addition, there are specific Ops Center and OS version requirements depending on which version of Solaris 11 you plan to install.You can get full details about the requirements in the Release Notes for Ops Center 12c update 2. Additional information is available in the Ops Center update 2 Readme document. Part 1: Using a Solaris 11 ISO Image to Create an Ops Center Repository Step 1 – Download the Solaris 11 Repository Image The Oracle Web site provides a number of download links for official Solaris 11 images. Among those links is a two-part downloadable repository image, which provides repository content for Solaris 11 SPARC and X86 architectures. In this case, I used the Solaris 11 11/11 image. First, navigate to the Oracle Web site and accept the OTN License agreement: http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html Next, download both parts of the Solaris 11 repository image. I recommend using the Solaris 11 11/11 image, and have provided the URLs here: http://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-ahttp://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-b Finally, use the cat command to generate an ISO image you can use to create your repository: # cat sol-11-1111-repo-full.iso-a sol-11-1111-repo-full.iso-b > sol-11-1111-repo-full.iso The process is very similar if you plan to set up a Solaris 11.1 release in Ops Center. In that case, navigate to the Solaris 11 download page, accept the license agreement and download both parts of the Solaris 11.1 repository image. Use the cat command to create a single ISO image for Solaris 11.1 Step 2 – Mount the Solaris 11 ISO Image in your Local Filesystem Once you have created the Solaris 11 ISO file, use the mount command to attach it to your local filesystem. After the image has been mounted, you can browse the repository from the ./repo subdirectory, and use the pkgrepo command to verify that Solaris 11 recognizes the content: Step 3 – Use the Image to Create your Ops Center Repository When you have confirmed the repository is available, you can use the image to create the Enterprise Controller repository. The operation will be slightly different depending on whether you configure Ops Center for Connected or Disconnected Mode operation.For connected mode operation, specify the mounted ./repo directory in step 4.1 of the configuration wizard, replacing the default Web-based URL. Since you're synchronizing from an OS repository image, you don't need to specify a key or certificate for the operation. For disconnected mode configuration, specify the Solaris 11 directory along with the path to the disconnected mode bundle downloaded by running the Ops Center harvester script: Ops Center will run a job to import package content from the mounted ISO image. A synchronization job can take several hours to run – in my case, the job ran for 3 hours, 22 minutes on a SunFire X4200 M2 server. During the job, Ops Center performs three important tasks: Synchronizes all content from the image and refreshes the repository Updates the IPS publisher information Creates OS Provisioning profiles and policies based on the content When the job is complete, you can unmount the ISO image from your Enterprise Controller. At that time, you can view the repository contents in your Ops Center Solaris 11 library. For the Solaris 11 11/11 release, you should see 8,668 packages and patches in the contents. You should also see default deployment plans for Solaris 11 provisioning. As part of the repository import, Ops Center generates plans and profiles for desktop, small and large servers for the SPARC and X86 architecture. Part 2: Using a Solaris 11 SRU to update an Ops Center Repository It's possible to use the same approach to upgrade your Ops Center repository to a Solaris 11 Support Repository Update, or SRU. Each SRU provides packages and updates to Solaris 11 - for example, SRU 8.5 provided the packaged for Oracle VM Server for SPARC 2.2 SRUs are available for download as ISO images from My Oracle Support, under document ID 1372094.1. The document provides download links for all SRUs which have been released by Oracle for Solaris 11. SRUs are cumulative, so later versions include the packages from earlier SRUs. After downloading an ISO image for an SRU, you can mount it to your local filesystem using a mount command similar to the one shown for Solaris 11 11/11. When the ISO image is mounted to the file system, you can perform the Add Content action from the Solaris 11 Library to synchronize packages and patches from the mounted image. I used the same mount point, so the repository URL was file://mnt/repo once again: After the synchronization of an SRU is complete, you can verify its content in the Solaris 11 library using the search function. The version pattern is 0.175.0.#, where the # is the same value as the SRU. In this example, I upgraded to SRU 1. The update job ran in just under 8 minutes, and a quick search shows that 22 software components were added to the repository: It's also possible to search for "Support Repository Update" to confirm the SRU was successfully added to the repository. Details on any of the update content are available by clicking the "View Details" button under the Packages/Patches entry.

  Read the article

• SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

  - by kross

  Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

  Read the article

• OFM 11g: OAM SSO for Forms and ADF Faces

  - by olaf.heimburger

  In my blog entry OFM 11g: Implementing OAM SSO with Forms we set the foundation for providing a complete Single Sign-On solution based on Oracle Access Manager (OAM). This foundation should now be used to combine Forms 11g and ADF Faces 11g applications with a transparent login. The Beginning Before we start, lets re-consider the requirements to achieve the ultimate goal. These are:- Access to the Forms 11g Application must be authenticated by OAM (protected). Access to the ADF Faces 11g Application must be authenticated by OAM (protected). Switching from one application to the other should not result in a re-authentication (aka single sign-on). User identity should be availble to the application without any extra work in the application code. All these are the common requirements for a single sign-on solution. The challenge here is that Forms relies on Oracle AS SSO (OSSO or "the old SSO") while ADF Faces is quite open and can be protected by Oracle AS SSO and Oracle Access Manager SSO (OAM SSO or "the modern SSO"). Both application types can use their own login mechanism. The Forms 11g Application To demonstrate the SSO functionality, we use the standard Forms test (/forms/frmservlet?form=test.fmx). Although this shows nothing specific in the Forms application, it is good enough to demonstrate that it is protected. The ADF Faces 11g Application With ADF 11g you can develop quite a number of useful Faces based applications. Among many features, it comes with the ADF Security feature that provides you with functionality to protect your pages, regions, and even TaskFlows from un-authenticated usage in a declarative way.To demonstrate that functionality a sample application with different access levels plus a login dialog is used. This application comes with a publc page that has protected content (a button). Once you are authenticated for the application, the protected content and some personalisation (the users name) is shown. Protecting Forms 11g As already explained in the OFM 11g: Implementing OAM SSO with Forms, the easiest way to protect a Forms application is to configure it as a OSSO partner application, setup mod_osso, test it, migrate OSSO to OAM SSO with the Upgrade Agent, reconfigure mod_osso, and you are done.Sort of. By default the OAM is configured to run in co-exist mode. This means that a user has to re-authenticate to the Forms application when logged into an OAM SSO application before. To avoid this, you must disable the co-exist mode, for example by using WLST and issue the disableCoexistMode on the OAM server. Protecting ADF Faces 11g To protect an ADF Faces 11g application we have to consider two scenarios: Use a HTTPD server in front of WLS Use WLS without a HTTPD server Both scenarios have their pro's and cons' and we won't get into details and just describe how to configure both. Scenario 1: HTTPD Server with WLS In this scenario we have to setup the environment in some steps:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Install the OAM WebGate into an HTTPD serverThe type of webgate you need to install depends on you HTTPD server. With Oracle HTTP Server 11g you can use the latest OAM 11g WebGate. With other HTTPD servers you must resort to OAM 10g WebGates. A OAM 11g WebGate can use the pre-created configuration files supplied during the WebGate configuration at OAM. An OAM 10g WebGate asks for the specific configuration and verifies it during installation. Configure the WLS plugin to forward the requests to WLSAgain, depending on your HTTPD Server you have different plugins to forward requests to WLS. With OHS 11g you can use the pre-installed mod_wl_ohs plugin. Its configuration is quite simple and straightforward. Configure an OAM SSPI Provider as a IdentityAsserter in WLS to retrieve the user identifierThis configuration is quite important as it retrieves the user identifier for the next step. If you have a SOA Suite installation within your OFM_HOME, the necessary software is already installed and you only need to setup your Security Realm within WLS.You can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. We add the OAMIdentityAsserter as the first SSPI Provider. It is important that the Control Flag is set to SUFFICIENT. Every other configuration can be left as is, no changes are necessary here. Configure an OAM Identity Provider to get the real user identityIn OFM 11g: Implementing OAM SSO with Forms we have configured an OID as Identity Store. To get the user identity we need to configure the same OID as an SSPI Provider for WLS. This will retrieve the real user information from OID and creates the JAAS Subject and Principals to be used by any application within WLS.Again, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Scenario 2: WLS only This scenario is a bit easier but requires more work in the WLS setup:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Configure the OAM SSPI Provider as IdentityAuthenticator to authenticate and set the user identifierWhen using the OAM SSPI Provider as OAMAuthenticator we create it with the Control Flag as SUFFICIENT. Afte saving it, the Provider Specific settings must be configured to allow the OAM SSPI Provider to connect to the OAM Server. Configure an OAM Identity Provider to get the real user identity providerAgain, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Configure ADF 11g Application for OAM Actually, there are no changes to be made within the ADF application. We only need to add the value CLIENT_CERT to the <auth-mode> tag in the <login-config> tag in the web.xml file. Testing To test the configuration, simply point your browser to one of both appliction URLs. OAM should kick in and redirect you to the OAM Login page. After you have entered the correct credentials, access to the URLs is granted and you will see the application. Enjoy!

  Read the article

• WebSocket and Java EE 7 - Getting Ready for JSR 356 (TOTD #181)

  - by arungupta

  WebSocket is developed as part of HTML 5 specification and provides a bi-directional, full-duplex communication channel over a single TCP socket. It provides dramatic improvement over the traditional approaches of Polling, Long-Polling, and Streaming for two-way communication. There is no latency from establishing new TCP connections for each HTTP message. There is a WebSocket API and the WebSocket Protocol. The Protocol defines "handshake" and "framing". The handshake defines how a normal HTTP connection can be upgraded to a WebSocket connection. The framing defines wire format of the message. The design philosophy is to keep the framing minimum to avoid the overhead. Both text and binary data can be sent using the API. WebSocket may look like a competing technology to Server-Sent Events (SSE), but they are not. Here are the key differences: WebSocket can send and receive data from a client. A typical example of WebSocket is a two-player game or a chat application. Server-Sent Events can only push data data to the client. A typical example of SSE is stock ticker or news feed. With SSE, XMLHttpRequest can be used to send data to the server. For server-only updates, WebSockets has an extra overhead and programming can be unecessarily complex. SSE provides a simple and easy-to-use model that is much better suited. SSEs are sent over traditional HTTP and so no modification is required on the server-side. WebSocket require servers that understand the protocol. SSE have several features that are missing from WebSocket such as automatic reconnection, event IDs, and the ability to send arbitrary events. The client automatically tries to reconnect if the connection is closed. The default wait before trying to reconnect is 3 seconds and can be configured by including "retry: XXXX\n" header where XXXX is the milliseconds to wait before trying to reconnect. Event stream can include a unique event identifier. This allows the server to determine which events need to be fired to each client in case the connection is dropped in between. The data can span multiple lines and can be of any text format as long as EventSource message handler can process it. WebSockets provide true real-time updates, SSE can be configured to provide close to real-time by setting appropriate timeouts. OK, so all excited about WebSocket ? Want to convert your POJOs into WebSockets endpoint ? websocket-sdk and GlassFish 4.0 is here to help! The complete source code shown in this project can be downloaded here. On the server-side, the WebSocket SDK converts a POJO into a WebSocket endpoint using simple annotations. Here is how a WebSocket endpoint will look like: @WebSocket(path="/echo")public class EchoBean { @WebSocketMessage public String echo(String message) { return message + " (from your server)"; }} In this code "@WebSocket" is a class-level annotation that declares a POJO to accept WebSocket messages. The path at which the messages are accepted is specified in this annotation. "@WebSocketMessage" indicates the Java method that is invoked when the endpoint receives a message. This method implementation echoes the received message concatenated with an additional string. The client-side HTML page looks like <div style="text-align: center;"> <form action=""> <input onclick="send_echo()" value="Press me" type="button"> <input id="textID" name="message" value="Hello WebSocket!" type="text"><br> </form></div><div id="output"></div> WebSocket allows a full-duplex communication. So the client, a browser in this case, can send a message to a server, a WebSocket endpoint in this case. And the server can send a message to the client at the same time. This is unlike HTTP which follows a "request" followed by a "response". In this code, the "send_echo" method in the JavaScript is invoked on the button click. There is also a <div> placeholder to display the response from the WebSocket endpoint. The JavaScript looks like: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/websockets/echo"; var websocket = new WebSocket(wsUri); websocket.onopen = function(evt) { onOpen(evt) }; websocket.onmessage = function(evt) { onMessage(evt) }; websocket.onerror = function(evt) { onError(evt) }; function init() { output = document.getElementById("output"); } function send_echo() { websocket.send(textID.value); writeToScreen("SENT: " + textID.value); } function onOpen(evt) { writeToScreen("CONNECTED"); } function onMessage(evt) { writeToScreen("RECEIVED: " + evt.data); } function onError(evt) { writeToScreen('<span style="color: red;">ERROR:</span> ' + evt.data); } function writeToScreen(message) { var pre = document.createElement("p"); pre.style.wordWrap = "break-word"; pre.innerHTML = message; output.appendChild(pre); } window.addEventListener("load", init, false);</script> In this code The URI to connect to on the server side is of the format ws://<HOST>:<PORT>/websockets/<PATH> "ws" is a new URI scheme introduced by the WebSocket protocol. <PATH> is the path on the endpoint where the WebSocket messages are accepted. In our case, it is ws://localhost:8080/websockets/echo WEBSOCKET_SDK-1 will ensure that context root is included in the URI as well. WebSocket is created as a global object so that the connection is created only once. This object establishes a connection with the given host, port and the path at which the endpoint is listening. The WebSocket API defines several callbacks that can be registered on specific events. The "onopen", "onmessage", and "onerror" callbacks are registered in this case. The callbacks print a message on the browser indicating which one is called and additionally also prints the data sent/received. On the button click, the WebSocket object is used to transmit text data to the endpoint. Binary data can be sent as one blob or using buffering. The HTTP request headers sent for the WebSocket call are: GET ws://localhost:8080/websockets/echo HTTP/1.1Origin: http://localhost:8080Connection: UpgradeSec-WebSocket-Extensions: x-webkit-deflate-frameHost: localhost:8080Sec-WebSocket-Key: mDbnYkAUi0b5Rnal9/cMvQ==Upgrade: websocketSec-WebSocket-Version: 13 And the response headers received are Connection:UpgradeSec-WebSocket-Accept:q4nmgFl/lEtU2ocyKZ64dtQvx10=Upgrade:websocket(Challenge Response):00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 The headers are shown in Chrome as shown below: The complete source code shown in this project can be downloaded here. The builds from websocket-sdk are integrated in GlassFish 4.0 builds. Would you like to live on the bleeding edge ? Then follow the instructions below to check out the workspace and install the latest SDK: Check out the source code svn checkout https://svn.java.net/svn/websocket-sdk~source-code-repository Build and install the trunk in your local repository as: mvn install Copy "./bundles/websocket-osgi/target/websocket-osgi-0.3-SNAPSHOT.jar" to "glassfish3/glassfish/modules/websocket-osgi.jar" in your GlassFish 4 latest promoted build. Notice, you need to overwrite the JAR file. Anybody interested in building a cool application using WebSocket and get it running on GlassFish ? :-) This work will also feed into JSR 356 - Java API for WebSocket. On a lighter side, there seems to be less agreement on the name. Here are some of the options that are prevalent: WebSocket (W3C API, the URL is www.w3.org/TR/websockets though) Web Socket (HTML5 Demos - html5demos.com/web-socket) Websocket (Jenkins Plugin - wiki.jenkins-ci.org/display/JENKINS/Websocket%2BPlugin) WebSockets (Used by Mozilla - developer.mozilla.org/en/WebSockets, but use WebSocket as well) Web sockets (HTML5 Working Group - www.whatwg.org/specs/web-apps/current-work/multipage/network.html) Web Sockets (Chrome Blog - blog.chromium.org/2009/12/web-sockets-now-available-in-google.html) I prefer "WebSocket" as that seems to be most common usage and used by the W3C API as well. What do you use ?

  Read the article

• Automating Form Login

  - by Greg_Gutkin

  Introduction A common task in configuring a web application for proxying in Pagelet Producer is setting up form autologin. PP provides a wizard-like tool for detecting the login form fields, but this is usually only the first step in configuring this feature. If the generated configuration doesn't seem to work, some additional manual modifications will be needed to complete the setup. This article will try to guide you through this process while steering you away from common pitfalls. For the purposes of this article, let's assume the following characteristics about your environment: Web Application Base URL: http://host/app (configured as Resource Source URL in PP) Pagelet Producer Base URL: http://pp/pagelets Form Field Auto-Detection Form Autologin is configured in the PP Admin UI under resource_name/Autologin/Form Login. First, you'll enter the URL to the login form under "Login Form Identification". This will enable the admin wizard to connect to and display the login page. Caution: RedirectsMake sure the entered URL matches what you see in the browser's address bar, when the application login page is displayed. For example, even though you may be able to reach the login page by simply typing http://host/app, the URL you end up on may change to http://host/app/login via browser redirect(s).The second URL is the one you will want to use. Caution: External Login ServersThe login page may actually come from a different server than the application you are trying to proxy. For example, you may notice that the login page URL changes to http://hostB/appB. This is common when external SSO products are involved. There are two ways of dealing with this situation. One is to configure Pagelet Producer to participate in SSO. This approach is out of scope of this article and is discussed in a separate whitepaper (TODO add link). The second approach is to use the autologin feature to provide stored credentials to the SSO login form. Since the login form URL is not an extension of the application base URL (PP resource URL), you will need to add a new PP resource for the SSO server and configure the login form on that resource instead of the original application resource. One side benefit of this additional resource is that it can reused for other applications relying on the same SSO server for login. After entering the login page URL (make sure dropdown says "URL"), click "Automatically Detect Form Fields". This will bring up the web app's login page in a new browser window. Fill it out and submit it as you would normally. If everything goes right, Pagelet Producer will intercept the submitted values and fill out all the needed configuration data in the Admin UI. If the login form window doesn't close or configuration data doesn't get filled in, you may have not entered the login page URL correctly. Review the two cautionary notes above and make any necessary changes. If the form fields got filled automatically, it's time to save the configuration and test it out. If you can access a protected area of the backend application via a proxied PP URL without filling out its login form, then you are pretty much done with login form configuration. The only other step you will need to complete before declaring this aspect of configuration production ready is configuring form field source. You may skip to that section below. Manual Login Form Identification Let's take a closer look at Login Form Identification. This determines how Pagelet Producer recognizes login forms as such. URL The most efficient way of detecting login forms is by looking at the page URL. This method can only be used under the following conditions: Login page URL must be different from the post login application URLs. Login page URL must stay constant regardless of the path it takes to reach the page. For example, reaching the login page by going to the application base URL or to a specific protected URL must result in a redirect to the same login page URL (query string excluded). If only the query string parameters change, just leave out the query string from the configured login page URL. If either of these conditions is not fullfilled, you must switch to the RegEx approach below. RegEx If the login page URL is not uniform enough across all scenarios or is indistinguishable from other page locations, PP can be configured to recognize it by looking at the page markup itself. This is accomplished by changing the dropdown to "RegEx". If regular expressions scare you, take comfort from the fact that in most cases you won't need to enter any special regex characters. Let's look at an example: Say you have a login form that looks like <form id='loginForm' action='login?from=pageA' > <input id='user'> <input id='pass'> </form> Since this form has an id attribute, you can be reasonably sure that this login form can be uniquely identified across the web application by this snippet: "id='loginForm'". (Unless, of course your backend web application contains login forms to other apps). Since no wildcards are needed to find this snippet, you can just enter it as is into the RegEx field - no special regular expression characters needed! If the web developer who created the form wasn't kind enough to provide a unique id, you will need to look for other snippets of the page to uniquely identify it. It could be the action URL, an input field id, or some other markup fragment. You should abstain from using UI text as an identifier it may change in translated versions of the page and prevent the login page logic from working for international users. You may need to turn to regular expression wildcard syntax if no simple matches work. For more information on regular expression, refer to the Resources section. Form Submit Location Now we'll look at the form submit location. If the captured URL contains query string parameters that will likely change from one form submission to the next, you will need to change its type to RegEx. This type will tell Pagelet Producer to parse the login page for the action URL and submit to the value found. The regular expression needs to point at the actual action URL with its first grouping expression. Taking the example form definition above, the form submit location regex would be: action='(.*?)' The parentheses are used to identify the actual action URL, while the rest of the expression provides the context for finding it. Expression .*? is a so-called reluctant wildcard that matches any character excluding the single quote that follows. See Resources section below for further information on regular expressions. Manual Form Field Detection If the Admin UI form field detection wizard fails to populate login form configuration page, you will have to enter the fields by hand. Use a built-in browser developer tool or addon (e.g. Firebug) to inspect the form element and its children input elements. For each input element (including hidden elements), create an entry under Form Fields. Change its Source according to the next section. Form Field Source Change the source of any of the fields not exposed to the users of the login form (i.e. hidden fields) to "Generated". This means Pagelet Producer will just use the values returned by the web app rather than supplying values it stored. For fields that contain sensitive data or vary from user to user (e.g. username & password), change the source to User (Credential) Vault. Logging Support To help you troubleshoot you autologin configuration, PP provides some useful logging support. To turn on detailed logging for the autologin feature, navigate to Settings in Admin UI. Under Logging, change the log level for AutoLogin to Finest. Known Limitations Autologin feature may not work as expected if login form fields (not just the values, but the DOM elements themselves) are generated dynamically by client side JavaScript. Resources RegEx RegEx Reference from Java RegEx Test Tool

  Read the article

• Blend for Visual Studio 2013 Prototyping Applications with SketchFlow

  - by T

  Originally posted on: http://geekswithblogs.net/tburger/archive/2014/08/10/blend-for-visual-studio-2013-prototyping-applications-with-sketchflow.aspxSketchFlow enables rapid creating of dynamic interface mockups very quickly. The SketchFlow workspace is the same as the standard Blend workspace with the inclusion of three panels: the SketchFlow Feedback panel, the SketchFlow Animation panel and the SketchFlow Map panel. By using SketchFlow to prototype, you can get feedback early in the process. It helps to surface possible issues, lower development iterations, and increase stakeholder buy in. SketchFlow prototypes not only provide an initial look but also provide a way to add additional ideas and input and make sure the team is on track prior to investing in complete development. When you have completed the prototyping, you can discard the prototype and just use the lessons learned to design the application from or extract individual elements from your prototype and include them in the application. I don’t recommend trying to transition the entire project into a development project. Objects that you add with the SketchFlow style have a hand-sketched look. The sketch style is used to remind stakeholders that this is a prototype. This encourages them to focus on the flow and functionality without getting distracted by design details. The sketchflow assets are under sketchflow in the asset panel and are identifiable by the postfix “–Sketch”. For example “Button-Sketch”. You can mix sketch and standard controls in your interface, if required. Be creative, if there is a missing control or your interface has a different look and feel than the out of the box one, reuse other sketch controls to mimic the functionality or look and feel. Only use standard controls if it doesn’t distract from the idea that this is a prototype and not a standard application. The SketchFlow Map panel provides information about the structure of your application. To create a new screen in your prototype: Right-click the map surface and choose “Create a Connected Screen”. Name the screens with names that are meaningful to the stakeholders. The start screen is the one that has the green arrow. To change the start screen, right click on any other screen and set to start screen. Only one screen can be the start screen at a time. Rounded screen are component screens to mimic reusable custom controls that will be built into the final application. You can change the colors of all of the boxes and should use colors to create functional groupings. The groupings can be identified in the SketchFlow Project Settings. To add connections between screens in the SketchFlow Map panel. Move the mouse over a screen in the SketchFlow and a menu will appear at the bottom of the screen node. In the menu, click Connect to an existing screen. Drag the arrow to another screen on the Map. You add navigation to your prototype by adding connections on the SketchFlow map or by adding navigation directly to items on your interface. To add navigation from objects on the artboard, right click the item then from the menu, choose “Navigate to”. This will expose a sub-menu with available screens, backward, or forward. When the map has connected screens, the SketchFlow Player displays the connected screens on the Navigate sidebar. All screens show in the SketchFlow Player Map. To see the SketchFlow Player, run your SketchFlow prototype. The Navigation sidebar is meant to show the desired user work flow. The map can be used to view the different screens regardless of suggested navigation in the navigation bar. The map is able to be hidden and shown. As mentioned, a component screen is a shared screen that is used in more than one screen and generally represents what will be a custom object in the application. To create a component screen, you can create a screen, right click on it in the SketchFlow Map and choose “Make into component screen”. You can mouse over a screen and from the menu that appears underneath, choose create and insert component screen. To use an existing screen, select if from the Asset panel under SketchFlow, Components. You can use Storyboards and Visual State animations in your SketchFlow project. However, SketchFlow also offers its own animation technique that is simpler and better suited for prototyping. The SketchFlow Animation panel is above your artboard by default. In SketchFlow animation, you create frames and then position the elements on your interface for each frame. You then specify elapsed time and any effects you want to apply to the transition. The + at the top is what creates new frames. Once you have a new Frame, select it and change the property you want to animate. In the example above, I changed the Text of the result box. You can adjust the time between frames in the lower area between the frames. The easing and effects functions are changed in the center between each frame. You edit the hold time for frames by clicking the clock icon in the lower left and the hold time will appear on each frame and can be edited. The FluidLayout icon (also located in the lower left) will create smooth transitions. Next to the FluidLayout icon is the name of that Animation. You can rename the animation by clicking on it and editing the name. The down arrow chevrons next to the name allow you to view the list of all animations in this prototype and select them for editing. To add the animation to the interface object (such as a button to start the animation), select the PlaySketchFlowAnimationAction from the SketchFlow behaviors in the Assets menu and drag it to an object on your interface. With the PlaySketchFlowAnimationAction that you just added selected in the Objects and Timeline, edit the properties to change the EventName to the event you want and choose the SketchFlowAnimation you want from the drop down list. You may want to add additional information to your screens that isn’t really part of the prototype but is relevant information or a request for clarification or feedback from the reviewer. You do this with annotations or notes. Both appear on the user interface, however, annotations can be switched on or off at design and review time. Notes cannot be switched off. To add an Annotation, chose the Create Annotation from the Tools menu. The annotation appears on the UI where you will add the notes. To display or Hide annotations, click the annotation toggle at the bottom right on the artboard . After to toggle annotations on, the identifier of the person who created them appears on the artboard and you must click that to expand the notes. To add a note to the artboard, simply select the Note-Sketch from Assets ->SketchFlow ->Styles ->Sketch Styles. Drag and drop it to the artboard and place where you want it. When you are ready for users to review the prototype, you have a few options available. Click File -> Export and choose one of the options from the list: Publish to Sharepoint, Package SketchFlowProject, Export to Microsoft Word, or Export as Images. I suggest you play with as many of the options as you can to see what they do. Both the Sharepoint and Packaged SketchFlowProject allow you to collect feedback from one or more users that you can import into the project. The user can make notes on the UI and in the Feedback area in the bottom left corner of the player. When the user is done adding feedback, it is exported from the right most folder icon in the My Feedback panel. Feeback is imported on a panel named SketchFlow Feedback. To get that panel to show up, select Window -> SketchFlow Feedback. Once you have the panel showing, click the + in the upper right of the panel and find the notes you exported. When imported, they will show up in a list and on the artboard. To document your prototype, use the Export to Microsoft Word option from the File menu. That should get you started with prototyping.

  Read the article

• HDMI video connection cuts top and bottom borders of screen

  - by Luis Alvarado

  Ok this is an extension of another problem I had with a VGA connection and an Nvidia Geforce GT 440 card. Here is goes the explanation of this particular problem: I have a Soneview 32' TV. This TV has many connections including VGA (First reason I bought it), HDMI (Second reason but did not have a HDMI cable at that time) and DVI. I have had this TV for little over a month now, actually I had it to celebrate the release of Ubuntu 11.10 and started using it exactly on that date (I know too much fan there but hey, I like geek stuff). I started using it with the VGA cable. After 2 weeks I bought an Nvidia GT440 card. The previous 9500GT was working correctly with no problems whatsoever. I installed the GT440 and the first problem that I encountered using this latest card is mentioned here: Nvidia GT 440 black screen problem when loading lightdm greeter. The solution to this problem was to actually disconnect then connect again the VGA cable. This would result in the screen showing me the lightdm screen for my login. If I did not disconnect then connect the cable I could be there forever thinking that there is no video signal. I got tired of looking for answers that did not work and for solutions that made me literally have to install Ubuntu again. I just went and bought a HDMI cable and changed the VGA one for that one. It worked and I did not have to disconnect/connect the cable but now I have this problem when using any resolution. My normal resolution is 1920x1080 (This TV is 1080HD) so in VGA I could use this resolution with no problem, but on HDMI am getting the borders cut out. Here is a pic: As you can see from the PIC, the Launcher icons only show less than 50% of their witdh. Forget about the top and bottom parts, I can access them with the mouse but I can not visualize them in the screen. It is like it's outside of the TVs view. Basically there is like 20 to 30 pixels gone from all sides. I searched around and came to running xrand --verbose to see what it could detect from the TV. I got this: cyrex@cyrex:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 (0x164) normal (normal) 0mm x 0mm Identifier: 0x163 Timestamp: 465485 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1920x1080 (0x164) 103.7MHz *current h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz v: height 1080 start 0 end 0 total 1080 clock 50.0Hz 1920x1080 (0x165) 105.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz 1920x1080 (0x166) 107.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 56.2KHz v: height 1080 start 0 end 0 total 1080 clock 52.0Hz 1920x1080 (0x167) 109.9MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 57.2KHz v: height 1080 start 0 end 0 total 1080 clock 53.0Hz 1920x1080 (0x168) 112.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 58.3KHz v: height 1080 start 0 end 0 total 1080 clock 54.0Hz 1920x1080 (0x169) 114.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 59.4KHz v: height 1080 start 0 end 0 total 1080 clock 55.0Hz 1680x1050 (0x16a) 98.8MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 58.8KHz v: height 1050 start 0 end 0 total 1050 clock 56.0Hz 1680x1050 (0x16b) 100.5MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 59.9KHz v: height 1050 start 0 end 0 total 1050 clock 57.0Hz 1600x1024 (0x16c) 95.0MHz h: width 1600 start 0 end 0 total 1600 skew 0 clock 59.4KHz v: height 1024 start 0 end 0 total 1024 clock 58.0Hz 1440x900 (0x16d) 76.5MHz h: width 1440 start 0 end 0 total 1440 skew 0 clock 53.1KHz v: height 900 start 0 end 0 total 900 clock 59.0Hz 1360x768 (0x171) 65.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 48.4KHz v: height 768 start 0 end 0 total 768 clock 63.0Hz 1360x768 (0x172) 66.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 49.2KHz v: height 768 start 0 end 0 total 768 clock 64.0Hz 1280x1024 (0x173) 85.2MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.6KHz v: height 1024 start 0 end 0 total 1024 clock 65.0Hz 1280x960 (0x176) 83.6MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 65.3KHz v: height 960 start 0 end 0 total 960 clock 68.0Hz 1280x960 (0x177) 84.8MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.2KHz v: height 960 start 0 end 0 total 960 clock 69.0Hz 1280x720 (0x178) 64.5MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 50.4KHz v: height 720 start 0 end 0 total 720 clock 70.0Hz 1280x720 (0x179) 65.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.1KHz v: height 720 start 0 end 0 total 720 clock 71.0Hz 1280x720 (0x17a) 66.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.8KHz v: height 720 start 0 end 0 total 720 clock 72.0Hz 1152x864 (0x17b) 72.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.1KHz v: height 864 start 0 end 0 total 864 clock 73.0Hz 1152x864 (0x17c) 73.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.9KHz v: height 864 start 0 end 0 total 864 clock 74.0Hz ....Many Resolutions later... 320x200 (0x1d1) 10.2MHz h: width 320 start 0 end 0 total 320 skew 0 clock 31.8KHz v: height 200 start 0 end 0 total 200 clock 159.0Hz 320x175 (0x1d2) 9.0MHz h: width 320 start 0 end 0 total 320 skew 0 clock 28.0KHz v: height 175 start 0 end 0 total 175 clock 160.0Hz 1920x1080 (0x1dd) 333.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 173.9KHz v: height 1080 start 0 end 0 total 1080 clock 161.0Hz If it helps, the Refresh Rate at 1920x1080 is 60. There is a flickering effect at this resolution using HDMI but not VGA which I imagine is related to the borders cut off issue am asking here. I have also done the following but this will only solve the problem on lower resolutions than 1920x1080 or on others TV (My father has a Sony TV where this problem is also solved): NVIDIA WAY Go to Nvidia-Settings and there will be an option that will have more features if a HDMI cable is connected. In the next pic the option is DFP-1 (CNDLCD) but this name changes depending on what device the PC is connected to: Uncheck Force Full GPU Scaling What this will do for resolutions LOWER than 1920x1080 (At least in my case) is solve the flickering problem and fix the borders cut by the monitor. Save to Xorg.conf file the changes made after changing to a resolution acceptable to your eyes. TV WAY If you TV has OSD Menu and this menu has options for scanning the screen resolution or auto adjusting to it, disable them. Specifically the option about SCAN. If you have an option for AV Mode disable it. Basically disable any option that needs to scan and scale the resolution. Test one by one. In the case of my father's TV this did it. In my case, the Nvidia solved it for lower resolutions. NOTE: In the case this is not solved in the next couple of weeks I will add this as the answer but take into consideration that the issue is still active with 1920x1080 resolutions.

  Read the article

• Use Those Extra Mouse Buttons to Increase Efficiency

  - by Mark Virtue

  Did you know that the most commonly used mouse actions are clicking a window’s “Close” button (the X in the top-right corner), and clicking the “Back” button (in a browser and various other programs)?  How much time do you spend every day locating the Close button or the Back button with your mouse so that you can click on them?  And what about that mouse you’re using – how many buttons does it have, besides the two main ones?  Most mouses these days have at least four (including the scroll-wheel, which a lot of people don’t realize is also a button as well).  Why not assign those extra buttons to your most common mouse actions, and save yourself a bundle of mousing-around time every day? If your mouse was manufactured by one of the “premium” mouse manufacturers (Microsoft, Logitech, etc), it almost certain came with driver software to allow you to customize your mouse’s controls and take advantage of your mouse’s special features.  Microsoft, for example, provides driver software called IntelliPoint (link below), while Logitech provides SetPoint.  It’s possible that your mouse has some extra buttons but doesn’t come with its own driver software (the author is using a Microsoft Bluetooth Notebook Mouse 5000, which amazingly is not supported by the Microsoft IntelliPoint software!).  If your mouse falls into this category, you can use a marvelous free product called X-Mouse Button Control, from Highresolution Enterprises (link below).  It provides a truly amazing array of mouse configuration options, including assigning actions to buttons on a per-application basis. Once X-Mouse Button Control is downloaded, its setup process is quite straightforward. Once downloaded, you can start the program via Start / Highresolution Enterprises / X-Mouse Button Control.  You will find the program’s icon in the system tray: Right-click on the icon and select Setup from the pop-up menu.  The program’s configuration window appears: It’s extremely unlikely that we will want to change the functionality of our mouse’s two main buttons (left and right), so instead we’ll look at the rest of the options on the right side of the window.  The Middle Button refers to either the third, middle button (found on some old mouses), or the pressing of the wheel itself, as a button (if you didn’t know you could press your wheel like a button, try it out now).  Mouse Button 4 and Mouse Button 5 usually refer to the extra buttons found on the side of the mouse, often near your thumb. So what can we use these extra mouse buttons for?  Well, clearly Close and Back are two obvious candidates.  Each of these can be found by selecting them from the drop-down menu next to each button field: Once the two options are chosen, the window will look something like this: If you’re not interested in choosing Back or Close, you may like to try some of the other options in the list, including: Cut, Copy and Paste Undo Show the Desktop Next/Previous track (for media playback) Open any program Simulate any keystroke or combination of keystrokes ….and many other options.  Explore the drop-down list to see them all. You may decide, for example, that closing the current document (as opposed to the current program) would be a good use for Mouse Button 5.  In other words, we need to simulate the keypress of Ctrl-F4.  Let’s see how we achieve this. First we select Simulated Keystrokes from the drop-down list: The Simulated Keystrokes window opens: The instructions on the page are pretty comprehensive.  If you want to simulate the Ctrl-F4 keystroke, you need to type {CTRL}{F4} into the box: …and then click OK. Assigning Actions to Buttons on a Per-Application Basis One of the most powerful features of X-Mouse Button Control is the ability to assign actions to buttons on a per-application basis.  This means that if we have a particular program open, then our mouse will behave differently – our buttons will do different things. For example, when we have Windows Media Player open, for example, we may wish to have buttons assigned to Play/Pause, Next track and Previous track, as well as changing the volume with the mouse!  This is easy with X-Mouse Button Control.  We start by opening Windows Media Player.  This makes the next step easier.  Then we return to X-Mouse Button Control and add a new “configuration”.  This is done by clicking the Add button: A window opens containing a list of all running programs, including our recently opened Windows Media Player: We select Windows Media Player and click OK.  A new, blank “configuration” is created: We repeat the earlier steps to assign buttons to Play/Pause, Next track and Previous track, and assign scrolling the wheel to alter the volume:   To save all our changes and close the window, we click Apply. Now spend a few minutes thinking of all the applications you use the most, and what are the most common simple tasks you perform in each of those applications.  Those tasks are then perfect candidates for per-application button assignments. There are many more configuration options and capabilities of X-Mouse Button Control – too many to list here.  We encourage you to spend a bit of time exploring the Setup window.  Then, most important of all, don’t forget to use your new mouse buttons!  Get into the habit of using them, and then after a while you’ll start to wonder how you ever tolerated the laborious, tedious, time-consuming process of actually locating each window’s Close button… Download X-Mouse Button Control Highresolution Enterprise Similar Articles Productive Geek Tips Add Specialized Toolbar Buttons to Firefox the Easy WayBoost Your Mouse Pointing Accuracy in WindowsMake Mouse Navigation Faster in WindowsVista Style Popup Previews for Firefox TabsStupid Geek Tricks: Using the Quick Zoom Feature in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

  Read the article

• Win a set of Infragistics Silverlight Controls with Data Visualization!

  - by mbcrump

  Infragistics recently released their new Silverlight Data Visualization Controls. I saw a couple of samples and had to take a look. I headed over to their website and downloaded the controls. I first noticed the hospital floor-plan demo shown on their site and started thinking of ways that I could use this in my own organization. I emailed them asking if I could give away the Silverlight Data Visualization controls on my site and they said, Yes! They also wanted to throw in the standard Silverlight Line of Business controls. (combined they are worth about $3000 US). I am very thankful they were willing to help the Silverlight community with this giveaway. So some quick rules below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of Infragistics Silverlight Controls with Data Visualization ($3000 Value) Random winner will be announced on January 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) For extra entries simply: Retweet a link to this page using the following URL [ http://mcrump.me/iscfree ]. It does not matter what the tweet says, just as long as the URL is the same. Unlimited tweets, but please don’t go crazy! This URL will allow me to track the users that Tweet this page. Don’t forget to visit Infragistics because they made this possible. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Silverlight Line of Business Control page is here. You can also check out the live demos here. The Data Visualization page is here. You can also check out the live demos here. Don’t worry about the Samples/Help Documentation. You can install all of that to your local HDD when you are installing it. I am going to walk you through the Silverlight Controls recently released by Infragistics. Begin by downloading the trial version and running the executable. If you downloaded the Complete bundle then you will have the following options to pick from. I like having help documentation and samples on my local HDD in case I do not have access to the internet and want to code. After it is installed, you may want to take a look at your Toolbox in Visual Studio 2010. Look for NetAdvantage 10.3 Silverlight and you will see that you now have access to all of these controls. At this point, to use the controls it’s as simple as drag/drop onto your Silverlight container. It will create the proper Namespaces for you. I wanted to highlight a few of the controls that I liked the most: Grid – After using the Infragistics grid you will wonder how you ever survived using the grid supplied by Microsoft standard controls.  This grid was designed to get your application up and running very fast. It’s simple to bind, it handles LARGE DataSets, easy to filter and allows endless possibilities of formatting data. The screenshot below is an example of the grid. For a real-time updating demo click here. SpellChecker- If your users are creating emails or performing any other function that requires Spell Checking then this control is great. Check out the screenshots below: In this first screen, I have a word that is not in the dictionary [DotNet]. The Spell Checker finds the word and allows the user to correct it. What is so great about Infragistics controls is that it only takes a few lines of code to have a full-featured Spell Checker in your application. TagCloud – This is a control that I haven’t seen anywhere else. It allows you to create keywords for popular search terms. This is very similar to TagCloud seen all over the internet.  Below is a screenshot that shows “Facebook” being a very popular item in the cloud. You can link these items to a hyperlink if you wanted. Importing/Exporting from Excel – I work with data a majority of the time. We all know the importance of Excel in our organizations, its used a lot. With Infragistics controls it make importing and exporting data from a Grid into Excel a snap. One of the things that I liked most about this control was the option to choose the Excel format (2003 or 2007). I haven’t seen this feature in other controls. Creating/Saving/Extracting/Uploading Zip Files – This is another control that I haven’t seen many others making. It allows you to basically manipulate a zip file in any way you like. You can even create a password on the zip file. Schedule – The Schedule that Infragistics provides resembles Outlook’s calendar. I think that it’s important for a user to see your app for the first time and immediately be able to start using because they are already familiar with the UI. The Schedule control accomplishes that in my opinion. I have just barely scratched the surface with the Infragistics Silverlight Line of Business controls. To check all of them then click here. A quick thing to note is that this giveaway also comes with the following Silverlight Data Visualization Controls. Below is a screenshot that list all of them:   I wanted to highlight 2 of the controls that I liked the most: xamBarcode– The xamBarcode supports the following Symbologies: Below is an example of the barcode generated by Infragistics controls. This is a high resolution barcode that you will not have to wonder if your scanner can read it. As long as you have ink in your printer your barcode will read it. I used a Symbol barcode reader to test this barcode. xamTreemap– I’ve never seen a way of displaying data like this before, but I like it. You can style this anyway that you like of course and it also comes with an Office 2010 Theme. Thanks to Infragistics for providing the controls to one lucky reader. I hope that you enjoyed this post and good luck to those that entered the contest.  Subscribe to my feed

  Read the article

• Web Platform Installer bundles for Visual Studio 2010 SP1 - and how you can build your own WebPI bundles

  - by Jon Galloway

  Visual Studio SP1 is  now available via the Web Platform Installer, which means you've got three options: Download the 1.5 GB ISO image Run the 750KB Web Installer (which figures out what you need to download) Install via Web PI Note: I covered some tips for installing VS2010 SP1 last week - including some that apply to all of these, such as removing options you don't use prior to installing the service pack to decrease the installation time and download size. Two Visual Studio 2010 SP1 Web PI packages There are actually two WebPI packages for VS2010 SP1. There's the standard Visual Studio 2010 SP1 package [Web PI link], which includes (quoting ScottGu's post): VS2010 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 The notes on that package sum it up pretty well: Looking for the latest everything? Look no further. This will get you Visual Studio 2010 Service Pack 1 and the RTM releases of ASP.NET MVC 3, IIS 7.5 Express, SQL Server Compact 4.0 with tooling, and Web Deploy 2.0. It's the value meal of Microsoft products. Tell your friends! Note: This bundle includes the Visual Studio 2010 SP1 web installer, which will dynamically determine the appropriate service pack components to download and install. This is typically in the range of 200-500 MB and will take 30-60 minutes to install, depending on your machine configuration. There is also a Visual Studio 2010 SP1 Core package [Web PI link], which only includes only the SP without any of the other goodies (MVC3, IIS Express, etc.). If you're doing any web development, I'd highly recommend the main pack since it the other installs are small, simple installs, but if you're working in another space, you might want the core package. Installing via the Web Platform Installer I generally like to go with the Web PI when possible since it simplifies most software installations due to things like: Smart dependency management - installing apps or tools which have software dependencies will automatically figure out which dependencies you don't have and add them to the list (which you can review before install) Simultaneous download and install - if your install includes more than one package, it will automatically pull the dependencies first and begin installing them while downloading the others Lists the latest downloads - no need to search around, as they're all listed based on a live feed Includes open source applications - a lot of popular open source applications are included as well as Microsoft software and tools No worries about reinstallation - WebPI installations detect what you've got installed, so for instance if you've got MVC 3 installed you don't need to worry about the VS2010 SP1 package install messing anything up In addition to the links I included above, you can install the WebPI from http://www.microsoft.com/web/downloads/platform.aspx, and if you have Web PI installed you can just tap the Windows key and type "Web Platform" to bring it up in the Start search list. You'll see Visual Studio SP1 listed in the spotlight list as shown below. That's the standard package, which includes MVC 3 / IIS 7.5 Express / SQL Compact / Web Deploy. If you just want the core install, you can use the search box in the upper right corner, typing in "Visual Studio SP1" as shown. Core Install: Use Web PI or the Visual Studio Web Installer? I think the big advantage of using Web PI to install VS 2010 SP1 is that it includes the other new bits. If you're going to install the SP1 core, I don't think there's as much advantage to using Web PI, as the Web PI Core install just downloads the Visual Studio Web Installer anyways. I think Web PI makes it a little easier to find the download, but not a lot. The Visual Studio Web Installer checks dependencies, so there's no big advantage there. If you do happen to hit any problems installing Visual Studio SP1 via Web PI, I'd recommend running the Visual Studio Web Installer, then running the Web PI VS 2010 SP1 package to get all the other goodies. I talked to one person who hit some random snag, recommended that, and it worked out. Custom Web Platform Installer bundles You can create links that will launch the Web Platform Installer with a custom list of tools. You can see an example of this by clicking through on the install button at http://asp.net/downloads (cancelling the installation dialog). You'll see this in the address bar: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;ASPNET;NETFramework4;SQLExpress;VWD Notice that the appid querystring parameter includes a semicolon delimited list, and you can make your own custom Web PI links with your own desired app list. I can think of a lot of cases where that would be handy: linking to a recommended software configuration from a software project or product, setting up a recommended / documented / supported install list for a software development team or IT shop, etc. For instance, here's a link that installs just VS2010 SP1 Core and the SQL CE tools: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=VS2010SP1Core;SQLCETools Note: If you've already got all or some of the products installed, the display will reflect that. On my dev box which has the full SP1 package, here's what the above link gives me: Here's another example - on a fresh box I created a link to install MVC 3 and the Web Farm Framework (http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;WebFarmFramework) and got the following items added to the cart: But where do I get the App ID's? Aha, that's the trick. You can link to a list of cool packages, but you need to know the App ID's to link to them. To figure that out, I turned on tracing in Web Platform Installer  (also handy if you're ever having trouble with a WebPI install) and from the trace logs saw that the list of packages is pulled from an XML file: DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9763242 DownloadManager Verbose: 0 : Connecting to https://go.microsoft.com/?linkid=9763242 with (partial) headers: Referer: wpi://2.1.0.0/Microsoft Windows NT 6.1.7601 Service Pack 1 If-Modified-Since: Wed, 09 Mar 2011 14:15:27 GMT User-Agent:Platform-Installer/3.0.3.0(Microsoft Windows NT 6.1.7601 Service Pack 1) DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9763242 responded with 302 DownloadManager Information: 0 : Response headers: HTTP/1.1 302 Found Cache-Control: private Content-Length: 175 Content-Type: text/html; charset=utf-8 Expires: Wed, 09 Mar 2011 22:52:28 GMT Location: https://www.microsoft.com/web/webpi/3.0/webproductlist.xml Server: Microsoft-IIS/7.5 X-AspNet-Version: 2.0.50727 X-Powered-By: ASP.NET Date: Wed, 09 Mar 2011 22:53:27 GMT Browsing to https://www.microsoft.com/web/webpi/3.0/webproductlist.xml shows the full list. You can search through that in your browser / text editor if you'd like, open it in Excel as an XML table, etc. Here's a list of the App ID's as of today: SMO SMO32 PHP52ForIISExpress PHP53ForIISExpress StaticContent DefaultDocument DirectoryBrowse HTTPErrors HTTPRedirection ASPNET NETExtensibility ASP CGI ISAPIExtensions ISAPIFilters ServerSideIncludes HTTPLogging LoggingTools RequestMonitor Tracing CustomLogging ODBCLogging BasicAuthentication WindowsAuthentication DigestAuthentication ClientCertificateMappingAuthentication IISClientCertificateMappingAuthentication URLAuthorization RequestFiltering IPSecurity StaticContentCompression DynamicContentCompression IISManagementConsole IISManagementScriptsAndTools ManagementService MetabaseAndIIS6Compatibility WASProcessModel WASNetFxEnvironment WASConfigurationAPI IIS6WPICompatibility IIS6ScriptingTools IIS6ManagementConsole LegacyFTPServer FTPServer WebDAV LegacyFTPManagementConsole FTPExtensibility AdminPack AdvancedLogging WebFarmFrameworkNonLoc ExternalCacheNonLoc WebFarmFramework WebFarmFrameworkv2 WebFarmFrameworkv2_beta ExternalCache ECacheUpdate ARRv1 ARRv2Beta1 ARRv2Beta2 ARRv2RC ARRv2NonLoc ARRv2 ARRv2Update MVC MVCBeta MVCRC1 MVCRC2 DBManager DbManagerUpdate DynamicIPRestrictions DynamicIPRestrictionsUpdate DynamicIPRestrictionsLegacy DynamicIPRestrictionsBeta2 FTPOOB IISPowershellSnapin RemoteManager SEOToolkit VS2008RTM MySQL SQLDriverPHP52IIS SQLDriverPHP53IIS SQLDriverPHP52IISExpress SQLDriverPHP53IISExpress SQLExpress SQLManagementStudio SQLExpressAdv SQLExpressTools UrlRewrite UrlRewrite2 UrlRewrite2NonLoc UrlRewrite2RC UrlRewrite2Beta UrlRewrite10 UrlScan MVC3Installer MVC3 MVC3LocInstaller MVC3Loc MVC2 VWD VWD2010SP1Pack NETFramework4 WebMatrix WebMatrix_v1Refresh IISExpress IISExpress_v1 IIS7 AspWebPagesVS AspWebPagesVS_1_0 Plan9 Plan9Loc WebMatrix_WHP SQLCE SQLCETools SQLCEVSTools SQLCEVSTools_4_0 SQLCEVSToolsInstaller_4_0 SQLCEVSToolsInstallerNew_4_0 SQLCEVSToolsInstallerRepair_EN_4_0 SQLCEVSToolsInstallerRepair_JA_4_0 SQLCEVSToolsInstallerRepair_FR_4_0 SQLCEVSToolsInstallerRepair_DE_4_0 SQLCEVSToolsInstallerRepair_ES_4_0 SQLCEVSToolsInstallerRepair_IT_4_0 SQLCEVSToolsInstallerRepair_RU_4_0 SQLCEVSToolsInstallerRepair_KO_4_0 SQLCEVSToolsInstallerRepair_ZH_CN_4_0 SQLCEVSToolsInstallerRepair_ZH_TW_4_0 VWD2008 WebDAVOOB WDeploy WDeploy_v2 WDeployNoSMO WDeploy11 WinCache52 WinCache53 NETFramework35 WindowsImagingComponent VC9Redist NETFramework20SP2 WindowsInstaller31 PowerShell PowerShellMsu PowerShell2 WindowsInstaller45 FastCGIUpdate FastCGIBackport FastCGIIIS6 IIS51 IIS60 SQLNativeClient SQLNativeClient2008 SQLNativeClient2005 SQLCLRTypes SQLCLRTypes32 SMO_10_1 MySQLConnector PHP52 PHP53 PHPManager VSVWD2010Feature VWD2010WebFeature_0 VWD2010WebFeature_1 VWD2010WebFeature_2 VS2010SP1Prerequisite RIAServicesToolkitMay2010 Silverlight4Toolkit Silverlight4Tools VSLS SSMAMySQL WebsitePanel VS2010SP1Core VS2010SP1Installer VS2010SP1Pack MissingVWDOrVSVWD2010Feature VB2010Beta2Express VCS2010Beta2Express VC2010Beta2Express RIAServicesToolkitApr2010 VS2010Beta1 VS2010RC VS2010Beta2 VS2010Beta2Express VS2k8RTM VSCPP2k8RTM VSVB2k8RTM VSCS2k8RTM VSVWDFeature LegacyWinCache SQLExpress2005 SSMS2005

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >