Search Results

Search found 4584 results on 184 pages for 'michael sh'.

Page 151/184 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• asterisk incoming/miss call notification (to skype)

  - by tike

  My environment: Centos 5.6, Asterisk with freepbx , skype i.e.sends message with parameter skype.sh skype_user message. Now i wanted to send skype notification so that my asterisk server notification are sent to skype rather than email (or to both skype and email). I know, there is voicemail.conf, voicemail_general and vm_email.inc, which has these body created. vm_email.inc emailbody=${VM_NAME},\n\nThere is a new voicemail in mailbox ${VM_MAILBOX} But i dont see where is something like "mail" command. What my thought to do is: instead of saying "mailcmd" pass system ( /path/to/script) and it would simply send message as rest is already configured. Any suggestion where i could run script rather than sending email Or Executing script on every incoming call, so that i could send as notification on every call over the Skype. (however, ultimate goal is to achieve miss call notification or voice mail notification over Skype.)

  Read the article

• sudoers security

  - by jetboy

  I've setup a script to do Subversion updates across two servers - the localhost and a remote server - called by a post-commit hook run by the www-data user. /srv/svn/mysite/hooks/post-commit contains: sudo -u cli /usr/local/bin/svn_deploy /usr/local/bin/svn_deploy is owned by the cli user, and contains: #!/bin/sh svn update /srv/www/mysite ssh cli@remotehost 'svn update /srv/www/mysite' To get this to work I've had to add the following to the sudoers file: www-data ALL = (cli) NOPASSWD: /usr/local/bin/svn_deploy cli ALL = NOEXEC:NOPASSWD: /usr/local/bin/svn_deploy Entries for both www-data and cli were necessary to avoid the error: post commit hook failed: no tty present and no askpass program specified I'm wary of giving any kind of elevated rights to www-data. Is there anything else I should be doing to reduce or eliminate any security risk?

  Read the article

• Bash script getting automatically deleted from Ubuntu 12.04 Server?

  - by Kris Anderson

  I'm running a bash script on an ubuntu 12.04 through cron. The script works fine for a few weeks (runs daily backups of websites, mysql databases, and copies to Amazon S3). However, twice now I've noticed that backups stopped happening. Both times the backup script (backupscript.sh) located in my home folder was no longer there. No one else has access to this server, so nothing was manually changed on the server and no one deleted the file by mistake. The cron job (nano /etc/crontab) still references this script, but the script itself disappears. What could cause this to happen? Does Ubuntu delete the script if it runs into some sort of error?

  Read the article

• How to make Microsoft Keyboard special keys run osascript commands on OS X?

  - by t-a-w

  I'm trying to make (1) special key open new terminal window. I bound it to file /Users/taw/bin/new_term, which contains: #!/bin/sh exec osascript -e 'tell application "Terminal" to do script "cd ."' This does the trick, except it also opens a Terminal window with this (even though Terminal.app is configured to always close windows when processes finish): Last login: Thu Mar 11 19:41:29 on ttys000 /Users/taw/bin/new_term ; exit; ~$ /Users/taw/bin/new_term ; exit; tab 1 logout [Process completed] How do I make it all work correctly? (possibly using a way different that what I've been attempting so far)

  Read the article

• K8NDRE motherboard in server fails to complete BIOS load with error 0078

  - by John

  K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition structure and new raid partitions, the bios fails to finish loading, with 0078 in the bottom right corner. Tried using completely new set of drives, and bios worked fine. Able to boot from a usb, format the drives, partition them, start raid, and then installed os. Reboot and received the same error from the bios, 0078. Works fine if I unplug the sata drives. Any thoughts? Physical inspection reveals no damage cables, connectors, or capacitors. Server was running happily for over a year, and this is the first problem it has had. Per Michael Hampton's answer: The drives, unjumpered and supporting sata III worked fine originally, and worked fine for formatting and having new partitions and raid installed on them. I did try jumpering one, with no change. If I put a brand new unformatted drive in, the motherboard recognizes it and I can proceed with formatting and installing. When I reboot, I get the 0078. I have 4 sata cables-the board supports 4 drives, so I tried each and no change. I am close to calling the motherboard done.

  Read the article

• s3cmd run on command line not on cron

  - by Jonar

  Many have said that the problem is with environment but I still can't seem to solve this problem. BTW I am using Ubuntu 9.10 login as user, then sudo -s using this command: s3cmd put file s3://bucket worked! now here is the simple script intended for testing: #! /bin/bash env >/tmp/cronjob.log s3cmd put file s3://bucket issuing the command crontab -e * * * * * /opt/script 2>&1 | logger Then using tail to syslogs Dec 3 23:22:01 ubuntu CRON[10795]: (root) CMD (/opt/script 2&1 | logger) But by verifying it on s3Fox Organizer, the file is not uploaded. (I tried changing the #! /bin/sh (no effect), putting crons on /etc/crontab (no effect), setting HOME=/home/user (no effect) What are other options to try? Or other ways to debug this problem. Thanks

  Read the article

• How can I make a persistent ssh tunnel?

  - by Blacklight Shining

  I have a Mac laptop and would like to have a persistent ssh tunnel so I can always log in from outside the local network. I'm looking for something that will work when the server can't be reached initially (e.g. if I don't have an Internet connection when I boot it), and will automatically start the tunnel when possible. I've tried putting an @reboot autossh line in my crontab, but I've found that sessions started with autossh disconnect every so often, and autossh quits if the first attempt fails. My current workaround is a small script and a cronjob: # crontab /home/blackl/bin/script &! # script #!/bin/sh while true; do ssh -Ngn -R $some_port:localhost:22 $server; sleep 30; done; Is there a better way to do this, or will I just have to be happy with this for now?

  Read the article

• Domain only responding to certain locations?

  - by CuriosityHosting

  I have a client who's been having problems with his site. The server doesn't seem to want to load hes site in certain countries, though other sites are fine. But this site [link removed] only seems to load in the US and Canada. In Europe, the UK, Asia etc, the site seems to be blocked (been like this for a week now). I've looked over the server and it seems fine. Other sites work fine, and the NS are set up properly, pointing to my main server, at http://puu.sh/MIGF Any ideas?

  Read the article

• Samba users not added untill they logon first? Edit: How do I add users to tdbsam without a password prompt?

  - by glisignoli

  I add users to my server with the command useradd -m -p PASS_HASH -s /usr/sbin/nologin USERNAME Then I try to access their samba home share, but it never shows up until I login with the user: root:~$sudo login failtest Password:###### Added user failtest. Is there some way of added the user without logging in? Edit: The problem is that the user is added with the useradd command, but ubuntu seems to run an initalisation script when the user logs on for the first time. This script then adds that user to the tdbsam user database. Finding the initalisation script or the method it uses to add a user to the tdbsam database without requiring any user input (as smbpasswd -a USER prompts the user for a password). So all I need is a way to add a user+pass to the tdbsam database without prompting a user for a password (eg: samaba-add-user.sh USERNAME PASSWORD).

  Read the article

• Start Daemonised GNU Screen from script a allow calling script to end

  - by tez

  I have a script on an embedded device that calls screen to start if a user logs in via a ssh session... #!/bin/sh SCREENRUNNING=`pgrep SCREEN` if [ -z "$SCREENRUNNING" ]; then echo "Screen not running so let's start the Master session sleep 2 screen -dmS Master sleep 2 screen -x root/Master else echo "Screen is already running let's connect to existing session" sleep 2 screen -x root/Master fi However this keeps the calling script active till the screen session exits,even if it's detached. What I want to do is have the calling script finish and exit while the screen session stays active. I've tried daemonising the screen -x lines and adding an & to the end of the screen -x lines neither of which work properly. Ideas?

  Read the article

• Squid stale-while-revalidate not working when max-age=0

  - by Wiliam

  Squid 2.7 always reaches backend, expected is to reach backend using stale-while-revalidate only when cache expires, not when client triggers max-age=0. Script: <?php header('Cache-Control: public, max-age=10, stale-if-error=200, stale-while-revalidate=500'); header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT"); sleep(2); die("OK"); And squid config: # http_port public_ip:port accel defaultsite= default hostname, if not provided http_port 80 accel defaultsite=mydomain.com # IP and port of your main application server (or multiple) cache_peer 127.0.0.1 parent 8000 0 no-query allow-miss originserver name=main # Do not tell the world that which squid version we're running httpd_suppress_version_string on # Remove the Caching Control header for upstream servers header_access Cache-Control deny all #header_access Last-Modified deny all # log all incoming traffic in Apache format logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh access_log /usr/local/squid/var/logs/squid.log combined all cache_effective_user squid refresh_pattern . 10080 90% 999999 ignore-no-cache override-expire ignore-private icp_port 0

  Read the article

• How to add a service to the S runlevel in Debian?

  - by MasterM

  I have the following script (what it does exactly is not important): #!/bin/sh -e ### BEGIN INIT INFO # Provides: watchdog_early # Required-Start: udev # Required-Stop: # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Start watchdog early. ### END INIT INFO # Do stuff here... I insert it into the S runlevel by invoking: insserv watchdog_early The aproriate link is created in /etc/rcS.d: S04watchdog_early -> ../init.d/watchdog_early and /etc/init.d/watchdog_early is executable (has mode 755). Despite all this, it is NOT being run at boot. Why?

  Read the article

• Most secure way to have IPtables auto-loaded using Debian / Linux

  - by networkIT

  I'd like to know the safest way to load iptables using Debian. Of course, I can use a script that uses iptables-restore : #!/bin/sh iptables-restore < /etc/firewall.conf but : 1) where is the safest place to have it loaded ? /etc/network/if-up.d ? I'm concerned about the script being loaded early enough at boot time, and reliably enough when plugging/unplugging interfaces ... 2) is this script method using iptables-restore the most secure way ? 3) additionnally, how much does the answer validity stretch to other Linux distros ( Ubuntu, Fedora, CentOS ) ? Thanks ^^

  Read the article

• Migrating to ssh key authentication; implications of adding sbin's to users $PATH

  - by ancillary

  I'm in the process of migrating to key's for authentication on my CentOS boxes. I have it all set up and working, but was a bit taken aback when I noticed service (and other things) didn't work the way I was accustomed to. Even after su'ing to root, still had to call the full path for it to work (which I assume to be expected/normal behavior). I also assume this is because there are different $PATH's for root (what I was using and am used to) and the newly created, key-using user. Specifically, I noticed the sbin's of the world missing from the user path. If I were to add those paths (/sbin/,/usr/sbin/,/usr/local/sbin) to a profile.d .sh script for this new key-loving user, would: I be opening up the system in ways I shouldn't be? I be doing something I needn't do save for reasons of laziness? I create other potential problems? Thanks.

  Read the article

• Getting error while starting tomcat?

  - by ram

  For my Tomcat installation process case is 1. cd /home/mpatil/Downloads/ 2. tar zxvf apache-tomcat-6.0.37.tar.gz 3. cd apache-tomcat-6.0.37/bin 4. ./startup.sh 5. tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out for `5` command results : [root@localhost bin]# tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory docs Nov 08, 2013 12:04:04 PM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Nov 08, 2013 12:04:04 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Nov 08, 2013 12:04:04 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/115 config=null Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 3036 ms and i tried in browser like http://locahost:8080/ nothing comming why.whats the wrong in my command or i did any wrong in my commands pls tel me

  Read the article

• searchd under runit continues writing to the runit's log

  - by Eugene

  searchd (Sphinx) run file: #!/bin/sh set -e APP_PATH=/srv/application TARGET_USER=user exec chpst -u $TARGET_USER /usr/bin/searchd --pidfile --nodetach --config $APP_PATH/current/config/production.sphinx.conf tail /var/log/sphinx/current 2014-06-07_18:13:56.87885 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.13740 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.88113 precached 9 indexes in 0.497 sec 2014-06-07_18:13:57.89167 precached 9 indexes in 0.497 sec 2014-06-07_18:13:59.75555 precached 9 indexes in 0.497 sec 2014-06-07_18:13:59.81554 precached 9 indexes in 0.497 sec 2014-06-07_18:14:00.33466 precached 9 indexes in 0.497 sec ... it continues to write the same line until sv stop sphinx ... Everything works fine, seachd starts and responds to the queries. But how to make logs to be less repetitive? When I start Sphinx manually it prints the "precached 9 indexes" just once.

  Read the article

• "Tail" a logstash server query

  - by phatmanace

  Assuming I have a logstash server chocked full of logs being loaded regularly, is there a reasonably elegant way that I can tail the results of a continuously executing query on the logstash server and show this in a terminal window e.g some-special-logstash-command.sh | egrep -v "(searchword1|searchword2)" the idea being that the command pipes stuff out of logstash and to my grep query that filters and shows me the filtered output for. .. of course if there is a logstash command that can do the grep piece for me as well, then that works too :) motivation for doing this, is that assuming all of my events from my estate is being loaded into logstash, then would be nice to have a terminal window with a continuous tail of interesting events as they occur scrolling past the screen. -Ace

  Read the article

• Apache+FastCGI Timeout Error: "has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds"

  - by Sadjad Fouladi

  I've recently installed mod_fastcgi and Apache 2.2. I have a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke 'mysite.com/test.fcgi' I see "Internal Server Error" after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] What could the problem be? Is it my .htaccess file?

  Read the article

• Creating a command that compress a file and save it on a usb, but cannot detect the usb in linux.

  - by Lance

  First of all I can't detect the USB on linux using the command line. I check the directory dev and still cannot find the usb. used the df command to check the usb. I plug and typed df and then unplug and typed df again and nothing changed. We are using a server(telnet) to use the command line of linux on a windows 7 OS. The second problem I have is how can I execute the bash script that I have made. It seems that I cant put my .sh file in /usr/bin/ I would like to make my command executable in all directories like a normal command. Sorry, im still newbie at this things. This is what I get on staying on Windows too much. Sorry for my english. Thank you in advance.

  Read the article

• How to get the Host value inside ~/.ssh/config

  - by iconoclast

  Within a ~/.ssh/config or ssh_config file, %h will give you the HostName value, but how do you get the Host ("alias") value? Why would I want to do that? Well, here's an example Host some_host_alias HostName 1.2.3.4 User my_user_name PasswordAuthentication no IdentityFile ~/.ssh/some_host_alias.rsa.id LocalCommand some_script.sh %h # <---- this is the critical line If I pass %h to the script, then it uses 1.2.3.4, which fails to give it all the options it needs to connect to that machine. I need to pass some_host_alias, but I can't find the % variable for that. (And: yes! I'm aware of the risk of recursion. That's solved inside the script.) UPDATE: Kenster pointed out that I could just hard-code the Host value as an argument to the script. Of course this will work in the example I gave, but it won't work if I'm using pattern matching for the Host.

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• init.d service died

  - by jerluc

  Adapting some code from a linux forum, I've added a service script to /etc/init.d on my ubuntu natty server to start/stop/restart node.js It literally was working the first day I made it, but then today, after viewing my website this morning, the server threw a 404, and upon further inspection, the node.js process was gone. So I went to start the service again, only this time, node.js didn't start at all, and ever since I haven't been able to get my service script working. Below is the entire script: #!/bin/sh # # Node Server Startup # case "$1" in start) echo -n "Starting node: " daemon node /usr/local/www/server.js echo touch /var/lock/subsys/node ;; stop) echo -n "Shutting down node: " killall node echo rm -f /var/lock/subsys/node rm -f /var/run/node.pid ;; status) status node ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading node: " killall node -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 Thanks for any help!

  Read the article

• Rename Mongo Shard

  - by HeySteve

  Can I, and if I can, how can I rename a shard in Mongo? Like if I wanted to change the instances of rs0 to rep0 below: mongos> sh.status() --- Sharding Status --- sharding version: { "_id" : 1, "version" : 4, "minCompatibleVersion" : 4, "currentVersion" : 5, "clusterId" : ObjectId("111111111111") } shards: { "_id" : "rs0", "host" : "rs0/mongo0a:27017,mongo0b:27017" } ... I have thought about removing and re-adding the shard, but I'm not sure how I'd do that without having to drain the shard and drop dbs. Currently 0 of the collections have sharding enabled, I just have a few standalones added as shards. Thanks

  Read the article

• What''s the "earliest" place one can set an environment variable during Linux boot process?

  - by amn

  I know I can set a variable in a shell startup file, but the thing is, I am trying to set up a POSIX-compatible environment, and a POSIX shell does not parse any startup files other than the one specified by the environment variable ENV. This presents a problem - currently my login starts the shell as bash, which I will try to replace with sh so Bash runs as POSIX shell - however then it will not parse the default startup files and I need ENV set to specify these. Which means as far as I understand that I need to specify ENV before login starts the shell, correct? Now, how would I do that? I hope my question is clear, if not I will gladly redact it.

  Read the article

• Override template shell on linux system in Active Directory domain?

  - by benizi

  Is there an easy way to override the Samba "template shell = /bin/bash" setting on a per-user basis? This is for Linux systems joined to an Active Directory domain. Some users want /bin/bash. Others including myself want /bin/zsh. Is there some AD attribute I can set? Anything I've found via googling seems hackish at best (writing a script to replace /bin/sh -- maintenance hassle). A similar serverfault question Override LDAP shell seems OpenLDAP-oriented (but if someone knows how to get it working with AD, please say so).

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >