Search Results

Search found 25386 results on 1016 pages for 'zend test'.

Page 153/1016 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Multiple PHP SAPI configuration

  - by DTest

  I'm trying to build PHP for use as an apache shared module --with-apxs2 but also with the 'php-cgi' binary (fastcgi) on Mac OSX 10.6. I'm using this ./configure : /configure --prefix=/usr/local/PHP \ --with-apxs2=/usr/local/apache/bin/apxs \ --disable-ipv6 \ --enable-cgi \ --with-curl \ --with-mysqli=/usr/local/mysql/bin/mysql_config \ --with-openssl=/usr \ --enable-ftp \ --enable-shared \ --enable-soap \ --enable-sockets \ --enable-zip \ --with-zlib-dir It builds the apache php5.so module just fine, but in /usr/local/PHP/bin, there is no php-cgi file. If I build it without the --with-apxs2 option (and indeed, I don't even need the --enable-cgi option) the php-cgi file gets built with no problems. Background on my setup: PHP 5.3.4, Apache 2.2.14, Mac OSX 10.6, Tomcat with JavaBridge (which is why I need the php-cgi file) Without the apxs2 option, /usr/local/php/bin/php -v produces: PHP 5.3.4 (cli) (built: Dec 21 2010 21:35:14) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies and /usr/local/php/bin/php-cgi -v produces: PHP 5.3.4 (cgi-fcgi) (built: Dec 21 2010 21:35:12) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies My question is, what am I not understanding with php SAPIs that won't allow the building of the two modules at the same time? Also, can I build it --with-apxs2 the first time, then make clean and rebuild in the same PHP directory /usr/local/php for the php files without issue?

  Read the article

• PHP Page Stopped outputting content After Running "yum install php-devel" Command

  - by stwhite

  This error is bizarre but after running the "yum install php-devel" command (after a long day of trying to install Facedetect and OpenCV for face detection) my site stopped functioning. The site uses mysql and php. When you hit the url, the page executes the mysql and the php, but it appears to randomly stop outputting the content of the page. None of the code was changed and the site was working flawlessly prior to running the mentioned ssh command. I do use output buffering in the site, but after removing the calls "ob_flush", "ob_end_flush" and "ob_start" it didn't appear to help—still having issues with the site. Any ideas what this could be? Here is output from terminal: [myserver ~]# cd Facedetect-4b1dfe1 [myserver Facedetect-4b1dfe1]# phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 [myserver Facedetect-4b1dfe1]# configure bash: configure: command not found [myserver Facedetect-4b1dfe1]# phpize && configure && make && make install Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 bash: configure: command not found bash: Read: command not found [myserver Facedetect-4b1dfe1]# make make: *** No targets specified and no makefile found. Stop. [myserver Facedetect-4b1dfe1]# yum install php5-devel

  Read the article

• KVM guest io is much slower than host io: is that normal?

  - by Evolver

  I have a Qemu-KVM host system setup on CentOS 6.3. Four 1TB SATA HDDs working in Software RAID10. Guest CentOS 6.3 is installed on separate LVM. People say that they see guest performance almost equal to host performance, but I don't see that. My i/o tests are showing 30-70% slower performance on guest than on host system. I tried to change scheduler (set elevator=deadline on host and elevator=noop on guest), set blkio.weight to 1000 in cgroup, change io to virtio... But none of these changes gave me any significant results. This is a guest .xml config part: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/vgkvmnode/lv2'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> There are my tests: Host system: iozone test # iozone -a -i0 -i1 -i2 -s8G -r64k random random KB reclen write rewrite read reread read write 8388608 64 189930 197436 266786 267254 28644 66642 dd read test: one process and then four simultaneous processes # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct 1073741824 bytes (1.1 GB) copied, 4.23044 s, 254 MB/s # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 14.4528 s, 74.3 MB/s 1073741824 bytes (1.1 GB) copied, 14.562 s, 73.7 MB/s 1073741824 bytes (1.1 GB) copied, 14.6341 s, 73.4 MB/s 1073741824 bytes (1.1 GB) copied, 14.7006 s, 73.0 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 6.2039 s, 173 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 32.7173 s, 32.8 MB/s 1073741824 bytes (1.1 GB) copied, 32.8868 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9097 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9688 s, 32.6 MB/s Guest system: iozone test # iozone -a -i0 -i1 -i2 -s512M -r64k random random KB reclen write rewrite read reread read write 524288 64 93374 154596 141193 149865 21394 46264 dd read test: one process and then four simultaneous processes # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 1073741824 bytes (1.1 GB) copied, 5.04356 s, 213 MB/s # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 24.7348 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7378 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7408 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.744 s, 43.4 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 10.415 s, 103 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 49.8874 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8608 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8693 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.9427 s, 21.5 MB/s I wonder is that normal situation or did I missed something?

  Read the article

• Lock statement vs Monitor.Enter method.

  - by Vokinneberg

  I suppose it is an interesting code example. We have a class, let's call it Test with Finalize method. In Main method here is two code blocks where i am using lock statement and Monitor.Enter call. Also i have two instances of class Test here. The experiment is pretty simple - nulling Test variable within locking block and try to collect it manually with GC.Collect method call. So, to see the Finilaze call i am calling GC.WaitForPendingFinalizers method. Everything is very simple as you can see. By defenition of lock statement it's opens by compiler to try{...}finally{..} block with Minitor.Enter call inside of try block and Monitor.Exit in finally block. I've tryed to implement try-finally block manually. I've expected the same behaviour in both cases. in case of using lock and in case of unsing Monitor.Enter. But, surprize, surprize - it is different as you can see below. public class Test : IDisposable { private string name; public Test(string name) { this.name = name; } ~Test() { Console.WriteLine(string.Format("Finalizing class name {0}.", name)); } } class Program { static void Main(string[] args) { var test1 = new Test("Test1"); var test2 = new Test("Tesst2"); lock (test1) { test1 = null; Console.WriteLine("Manual collect 1."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 2."); GC.Collect(); } var lockTaken = false; System.Threading.Monitor.Enter(test2, ref lockTaken); try { test2 = null; Console.WriteLine("Manual collect 3."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 4."); GC.Collect(); } finally { System.Threading.Monitor.Exit(test2); } Console.ReadLine(); } } Output of this example is Manual collect 1. Manual collect 2. Manual collect 3. Finalizing class name Test2. Manual collect 4. And null reference exception in last finally block because test2 is null reference. I've was surprised and disasembly my code into IL. So, here is IL dump of Main method. .entrypoint .maxstack 2 .locals init ( [0] class ConsoleApplication2.Test test1, [1] class ConsoleApplication2.Test test2, [2] bool lockTaken, [3] bool <>s__LockTaken0, [4] class ConsoleApplication2.Test CS$2$0000, [5] bool CS$4$0001) L_0000: nop L_0001: ldstr "Test1" L_0006: newobj instance void ConsoleApplication2.Test::.ctor(string) L_000b: stloc.0 L_000c: ldstr "Tesst2" L_0011: newobj instance void ConsoleApplication2.Test::.ctor(string) L_0016: stloc.1 L_0017: ldc.i4.0 L_0018: stloc.3 L_0019: ldloc.0 L_001a: dup L_001b: stloc.s CS$2$0000 L_001d: ldloca.s <>s__LockTaken0 L_001f: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0024: nop L_0025: nop L_0026: ldnull L_0027: stloc.0 L_0028: ldstr "Manual collect." L_002d: call void [mscorlib]System.Console::WriteLine(string) L_0032: nop L_0033: call void [mscorlib]System.GC::Collect() L_0038: nop L_0039: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_003e: nop L_003f: ldstr "Manual collect." L_0044: call void [mscorlib]System.Console::WriteLine(string) L_0049: nop L_004a: call void [mscorlib]System.GC::Collect() L_004f: nop L_0050: nop L_0051: leave.s L_0066 L_0053: ldloc.3 L_0054: ldc.i4.0 L_0055: ceq L_0057: stloc.s CS$4$0001 L_0059: ldloc.s CS$4$0001 L_005b: brtrue.s L_0065 L_005d: ldloc.s CS$2$0000 L_005f: call void [mscorlib]System.Threading.Monitor::Exit(object) L_0064: nop L_0065: endfinally L_0066: nop L_0067: ldc.i4.0 L_0068: stloc.2 L_0069: ldloc.1 L_006a: ldloca.s lockTaken L_006c: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0071: nop L_0072: nop L_0073: ldnull L_0074: stloc.1 L_0075: ldstr "Manual collect." L_007a: call void [mscorlib]System.Console::WriteLine(string) L_007f: nop L_0080: call void [mscorlib]System.GC::Collect() L_0085: nop L_0086: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_008b: nop L_008c: ldstr "Manual collect." L_0091: call void [mscorlib]System.Console::WriteLine(string) L_0096: nop L_0097: call void [mscorlib]System.GC::Collect() L_009c: nop L_009d: nop L_009e: leave.s L_00aa L_00a0: nop L_00a1: ldloc.1 L_00a2: call void [mscorlib]System.Threading.Monitor::Exit(object) L_00a7: nop L_00a8: nop L_00a9: endfinally L_00aa: nop L_00ab: call string [mscorlib]System.Console::ReadLine() L_00b0: pop L_00b1: ret .try L_0019 to L_0053 finally handler L_0053 to L_0066 .try L_0072 to L_00a0 finally handler L_00a0 to L_00aa I does not see any difference between lock statement and Monitor.Enter call. So, why i steel have a reference to the instance of test1 in case of lock, and object is not collected by GC, but in case of using Monitor.Enter it is collected and finilized?

  Read the article

• Representing Mauritius in the 2013 Bench Games

  Only by chance I came across an interesting option for professionals and enthusiasts in IT, and quite honestly I can't even remember where I caught attention of Brainbench and their 2013 Bench Games event. But having access to 600+ free exams in a friendly international intellectual competition doesn't happen to be available every day. So, it was actually a no-brainer to sign up and browse through the various categories. Most interestingly, Brainbench is not only IT-related. They offer a vast variety of fields in their Test Center, like Languages and Communication, Office Skills, Management, Aptitude, etc., and it can be a little bit messy about how things are organised. Anyway, while browsing through their test offers I added a couple of exams to 'My Plan' which I would give a shot afterwards. Self-assessments Actually, I took the tests based on two major aspects: 'Fun Factor' and 'How good would I be in general'... Usually, you have to pay for any kind of exams and given this unique chance by Brainbench to simply train this kind of tests was already worth the time. Frankly speaking, the tests are very close to the ones you would be asked to do at Prometric or Pearson Vue, ie. Microsoft exams, etc. Go through a set of multiple choice questions in a given time frame. Most of the tests I did during the Bench Games were based on 40 questions, each with a maximum of 3 minutes to answer. Ergo, one test in maximum 2 hours - that sounds feasible, doesn't it? The Measure of Achievement While the 2013 Bench Games are considered a worldwide friendly competition of knowledge I was really eager to get other Mauritians attracted. Using various social media networks and community activities it all looked quite well at the beginning. Mauritius was listed on rank #19 of Most Certified Citizens and rank #10 of Most Master Level Certified Nation - not bad, not bad... Until... the next update of the Bench Games Leaderboard. The downwards trend seemed to be unstoppable and I couldn't understand why my results didn't show up on the Individual Leader Board. First of all, I passed exams that were not even listed and second, I had better results on some exams listed. After some further information from the organiser it turned out that my test transcript wasn't available to the public. Only then results are considered and counted in the competition. During that time, I actually managed to hold 3 test results on the Individuals... Other participants were merciless, eh, more successful than me, produced better test results than I did. But still I managed to stay on the final score board: An 'exotic' combination of exam, test result, country and person itself Representing Mauritius and the Visual FoxPro community in that fun event. And although I mainly develop in Visual FoxPro 9.0 SP2 and C# using .NET Framework from 2.0 to 4.5 since a couple of years I still managed to pass on Master Level. Hm, actually my Microsoft Certified Programmer (MCP) exams are dated back in June 2004 - more than 9 years ago... Look who got lucky... As described above I did a couple of exams as time allowed and without any preparations, but still I received the following mail notification: "Thank you for recently participating in our Bench Games event.  We wanted to inform you that you obtained a top score on our test(s) during this event, and as a result, will receive a free annual Brainbench subscription.  Your annual subscription will give you access to all our tests just like Bench Games, but for an entire year plus additional benefits!" -- Leader Board Notification from Brainbench Even fun activities get rewarded sometimes. Thanks to @Brainbench_com for the free annual subscription based on my passed 2013 Bench Games Master Level exam. It would be interesting to know about the total figures, especially to see how many citizens of Mauritius took part in this year's Bench Games. Anyway, I'm looking forward to be able to participate in other challenges like this in the future.

  Read the article

• Different behavior for REF CURSOR between Oracle 10g and 11g when unique index present?

  - by wweicker

  Description I have an Oracle stored procedure that has been running for 7 or so years both locally on development instances and on multiple client test and production instances running Oracle 8, then 9, then 10, and recently 11. It has worked consistently until the upgrade to Oracle 11g. Basically, the procedure opens a reference cursor, updates a table then completes. In 10g the cursor will contain the expected results but in 11g the cursor will be empty. No DML or DDL changed after the upgrade to 11g. This behavior is consistent on every 10g or 11g instance I've tried (10.2.0.3, 10.2.0.4, 11.1.0.7, 11.2.0.1 - all running on Windows). The specific code is much more complicated but to explain the issue in somewhat realistic overview: I have some data in a header table and a bunch of child tables that will be output to PDF. The header table has a boolean (NUMBER(1) where 0 is false and 1 is true) column indicating whether that data has been processed yet. The view is limited to only show rows in that have not been processed (the view also joins on some other tables, makes some inline queries and function calls, etc). So at the time when the cursor is opened, the view shows one or more rows, then after the cursor is opened an update statement runs to flip the flag in the header table, a commit is issued, then the procedure completes. On 10g, the cursor opens, it contains the row, then the update statement flips the flag and running the procedure a second time would yield no data. On 11g, the cursor never contains the row, it's as if the cursor does not open until after the update statement runs. I'm concerned that something may have changed in 11g (hopefully a setting that can be configured) that might affect other procedures and other applications. What I'd like to know is whether anyone knows why the behavior is different between the two database versions and whether the issue can be resolved without code changes. Update 1: I managed to track the issue down to a unique constraint. It seems that when the unique constraint is present in 11g the issue is reproducible 100% of the time regardless of whether I'm running the real world code against the actual objects or the following simple example. Update 2: I was able to completely eliminate the view from the equation. I have updated the simple example to show the problem exists even when querying directly against the table. Simple Example CREATE TABLE tbl1 ( col1 VARCHAR2(10), col2 NUMBER(1) ); INSERT INTO tbl1 (col1, col2) VALUES ('TEST1', 0); /* View is no longer required to demonstrate the problem CREATE OR REPLACE VIEW vw1 (col1, col2) AS SELECT col1, col2 FROM tbl1 WHERE col2 = 0; */ CREATE OR REPLACE PACKAGE pkg1 AS TYPE refWEB_CURSOR IS REF CURSOR; PROCEDURE proc1 (crs OUT refWEB_CURSOR); END pkg1; CREATE OR REPLACE PACKAGE BODY pkg1 IS PROCEDURE proc1 (crs OUT refWEB_CURSOR) IS BEGIN OPEN crs FOR SELECT col1 FROM tbl1 WHERE col1 = 'TEST1' AND col2 = 0; UPDATE tbl1 SET col2 = 1 WHERE col1 = 'TEST1'; COMMIT; END proc1; END pkg1; Anonymous Block Demo DECLARE crs1 pkg1.refWEB_CURSOR; TYPE rectype1 IS RECORD ( col1 vw1.col1%TYPE ); rec1 rectype1; BEGIN pkg1.proc1 ( crs1 ); DBMS_OUTPUT.PUT_LINE('begin first test'); LOOP FETCH crs1 INTO rec1; EXIT WHEN crs1%NOTFOUND; DBMS_OUTPUT.PUT_LINE(rec1.col1); END LOOP; DBMS_OUTPUT.PUT_LINE('end first test'); END; /* After creating this index, the problem is seen */ CREATE UNIQUE INDEX unique_col1 ON tbl1 (col1); /* Reset data to initial values */ TRUNCATE TABLE tbl1; INSERT INTO tbl1 (col1, col2) VALUES ('TEST1', 0); DECLARE crs1 pkg1.refWEB_CURSOR; TYPE rectype1 IS RECORD ( col1 vw1.col1%TYPE ); rec1 rectype1; BEGIN pkg1.proc1 ( crs1 ); DBMS_OUTPUT.PUT_LINE('begin second test'); LOOP FETCH crs1 INTO rec1; EXIT WHEN crs1%NOTFOUND; DBMS_OUTPUT.PUT_LINE(rec1.col1); END LOOP; DBMS_OUTPUT.PUT_LINE('end second test'); END; Example of what the output on 10g would be:   begin first test   TEST1   end first test   begin second test   TEST1   end second test Example of what the output on 11g would be:   begin first test   TEST1   end first test   begin second test   end second test Clarification I can't remove the COMMIT because in the real world scenario the procedure is called from a web application. When the data provider on the front end calls the procedure it will issue an implicit COMMIT when disconnecting from the database anyways. So if I remove the COMMIT in the procedure then yes, the anonymous block demo would work but the real world scenario would not because the COMMIT would still happen. Question Why is 11g behaving differently? Is there anything I can do other than re-write the code?

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Android- Using DexClassLoader to load apk file.

  - by Craig O Connor

  Hi guys, I've hit a bit of a wall. Any help would be appreciated. I have an app that I want to use DexClassLoader to load another apk file. Here is my code: DexClassLoader dLoader = new DexClassLoader("/sdcard/download/test.apk","/sdcard/download",null,ClassLoader.getSystemClassLoader().getParent()); Class calledClass = dLoader.loadClass("com.test.classname"); Intent it=new Intent(this, calledClass); it.setClassName("com.test", "com.test.classname"); startActivity(it); Now I had already installed test.apk so when I ran the above code it worked fine and launched the application. However I want to be able to run this without test.apk being installed already (as that would defeat the entire point of the application) . So I uninstalled it and when I ran the my app again I get this error: android.content.ActivityNotFoundException: Unable to find explicit activity class {com.test/com.test.classname}; have you declared this activity in your AndroidManifest.xml. So I'm a bit stumped here. This activity is declared in the Manifest of the apk I am trying to run. I can't declare it in my applications Manifest. Any ideas? Thanks, Craig

  Read the article

• How to resolve Windows Update Error 8024402F on Windows 7 Home Premium 64bit?

  - by Day

  I have been having the same problem with Windows Updates on 2 of my machines at home, both running Windows 7 Home Premium 64-bit. One of the 2 machines is a brand new install, the other has run Windows Update in the past, but is also not working now. When I manually check for updates using the Control Panel, I get error code 8024402F: I followed the link to "Get help with this error", which brings up several articles in Windows Help and Support, none of which are for this specific error code. From the help and general googling I've tried: Checking internet connectivity. Most of the help suggests that this error is caused by a general internet connectivity problem. But if you're reading this, my connection is definitely working fine. Disabling antivirus temporarily and trying to run Windows Update. This didn't help (I run AVG free) Running Control Panel - Troubleshooting - Security Systems - Fix Problems with Windows Update. This said it detected and resolved problems, but didn't help. Update using IE (as I used to in XP). Go to http://windowsupdate.microsoft.com/ redirects me to http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx for which IE displays a "connection problem" (i.e. site unreachable) I've had the same problem for 24 hours now, so surely the Windows Update servers haven't been down this whole time? A quick check on twitter shows no worldwide outcry about Windows Update being unavailable, so is it just me? I'm based in the UK, but I notice that the http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx URL is also unavailable using ''wget'' from my webserver in Chicago. day@ord1:~$ wget http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx --2011-03-17 00:01:27-- http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx Resolving test.update.microsoft.com... failed: Name or service not known. wget: unable to resolve host address `test.update.microsoft.com' day@ord1:~$ host test.update.microsoft.com Host test.update.microsoft.com not found: 3(NXDOMAIN)

  Read the article

• MS Access 2003: Can data disappear from records and how do I test for this and prevent it?

  - by user328960

  Problem and about the database: Data from a record in Access 2003 database has disappeared. This database has 1 backend and 3 frontends, multiple users and is hosted on Citrix. Within this database, we have records of all clients served, ranging in the 1000s. Background info: The form for client data entry is set up with various subforms, including both a "programs enrolled" subform and a "services" subform. A client can be enrolled in multiple programs. Once enrolled in a program, services can be entered for that program area using the services subform. There are multiple fields in the services subform, one of which is a drop-down field allowing you to choose from the programs a client has been enrolled in (the list is updated for that client whenever he is enrolled in a new program). The problem details: For one specific record and one specific program area, the program has disappeared from the "programs enrolled" subform and all of the related services have disappeared from the "services" subform for a period of 3 months of data entry. However, other programs and services for this record did not disappear. Questions: Is the disappearance of data a common Access 2003 problem? Are there tests in place that can be run to see if data is disappearing and catch that data? If so, what are they? If there is specific code involved, what is it? What can be done to prevent the disappearing of data (other than using a different database)?

  Read the article

• Java - HtmlUnit - Unable to save HTML to file (in some cases)

  - by Walter White

  Hi all, I am having intermittent issues saving the response HTML in HtmlUnit. Caused by: java.io.IOException: Unable to save file:C:\ccview\PP50773_4.0_walter\TSC_hca\Applications\HCA_J2EE\HCA\target\HtmlUnitTests\single\1\com\pnc\tsc\hca\ui\test\SiteCrawler\crawlSiteAsProvider\10.SiteCrawler.crawl.html at com.pnc.tsc.hca.ui.util.GetUtil.save(GetUtil.java:128) at com.pnc.tsc.hca.ui.util.GetUtil.add(GetUtil.java:75) at com.pnc.tsc.hca.ui.util.GetUtil.click(GetUtil.java:49) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:87) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:61) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:63) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:63) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:63) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawl(SiteCrawler.java:54) at com.pnc.tsc.hca.ui.test.SiteCrawler.crawlSiteAsProvider(SiteCrawler.java:50) ... 15 more Caused by: java.lang.RuntimeException: java.io.IOException: The system cannot find the path specified at com.gargoylesoftware.htmlunit.html.XmlSerializer.getAttributesFor(XmlSerializer.java:165) at com.gargoylesoftware.htmlunit.html.XmlSerializer.printOpeningTag(XmlSerializer.java:126) at com.gargoylesoftware.htmlunit.html.XmlSerializer.printXml(XmlSerializer.java:83) at com.gargoylesoftware.htmlunit.html.XmlSerializer.printXml(XmlSerializer.java:93) at com.gargoylesoftware.htmlunit.html.XmlSerializer.printXml(XmlSerializer.java:93) at com.gargoylesoftware.htmlunit.html.XmlSerializer.asXml(XmlSerializer.java:73) at com.gargoylesoftware.htmlunit.html.XmlSerializer.save(XmlSerializer.java:55) at com.gargoylesoftware.htmlunit.html.HtmlPage.save(HtmlPage.java:2259) at com.pnc.tsc.hca.ui.util.GetUtil.save(GetUtil.java:126) ... 24 more Caused by: java.io.IOException: The system cannot find the path specified at java.io.WinNTFileSystem.createFileExclusively(Native Method) at java.io.File.createNewFile(File.java:883) at com.gargoylesoftware.htmlunit.html.XmlSerializer.createFile(XmlSerializer.java:216) at com.gargoylesoftware.htmlunit.html.XmlSerializer.getAttributesFor(XmlSerializer.java:160) ... 32 more Now, the parent directory exists and some other files have already been written to the directory. Looking at the filename, I don't see anything that would stand out as a red flag indicating the filename is bad. What can I do to correct this error? Thanks, Walter

  Read the article

• iPhone UnitTesting UITextField value and otest error 133

  - by Justin Galzic

  Are UITextFields not meant to be part of the LogicTests and instead part of the ApplicationTest target? I have a factory class that is responsible for creating and returning an (iPhone) UITextField and I'm trying to unit test it. It is part of my Logic Test target and when I try to build and run the tests, I get a build error about: /Developer/Tools/RunPlatformUnitTests.include:451:0 Test rig '/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.2.sdk/ 'Developer/usr/bin/otest' exited abnormally with code 133 (it may have crashed). In the build window, this points to the following line in: "RunPlatformUnitTests.include" RPUTIFail ${LINENO} "Test rig '${TEST_RIG}' exited abnormally with code ${TEST_RIG_RESULT} (it may have crashed)." My unit test looks like this: #import <SenTestingKit/SenTestingKit.h> #import <UIKit/UIKit.h> // Test-subject headers. #import "TextFieldFactory.h" @interface TextFieldFactoryTests : SenTestCase { } @end @implementation TextFieldFactoryTests #pragma mark Test Setup/teardown - (void) setUp { NSLog(@"%@ setUp", self.name); } - (void) tearDown { NSLog(@"%@ tearDown", self.name); } #pragma mark Tests - (void) testUITextField_NotASecureField { NSLog(@"%@ start", self.name); UITextField *textField = [TextFieldFactory createTextField:YES]; NSLog(@"%@ end", self.name); } The class I'm trying to test: // Header file #import <Foundation/Foundation.h> #import <UIKit/UIKit.h> @interface TextFieldFactory : NSObject { } +(UITextField *)createTextField:(BOOL)isSecureField; @end // Implementation file #import "TextFieldFactory.h" @implementation TextFieldFactory +(UITextField *)createTextField:(BOOL)isSecureField { // x,y,z,w are constants declared else where UITextField *textField = [[[UITextField alloc] initWithFrame:CGRectMake(x, y, z, w)] autorelease]; // some initialization code return textField; } @end

  Read the article

• Adding tables to a herd in bucardo

  - by Joseph the Dreamer

  Forgive my ignorance, I am a JS programmer given the task to do DB replication using bucardo. I understand the concept of how bucardo works, but setting it up is a bit confusing. The set-up is: Lubuntu Linux Two databases test_master and test_slave, using PostgreSQL Each DB has a table named test, containing 2 columns: id (PK) and test (int) I use pgAdmin3 I have already added them to bucardo's list of databases and added all tables. Table: public.test DB: test_slave PK: id (int4) Table: public.test DB: test_master PK: id (int4) As you see, due to the fact that the DBs are identical, even the schema names are identical. So when I do: bucardo_ctl add herd sample_herd public.test Ok, so it got added to the herd. But this command gets confused which database public.test comes from. So when I add a sync: $ bucardo_ctl add sync sample_sync source=sample_herd targetdb=test_slave type=fullcopy Failed to add sync: DBD::Pg::st execute failed: ERROR: Source and target databases cannot be the same: test_slave at line 118. at line 30. CONTEXT: PL/Perl function "validate_sync" at /usr/bin/bucardo_ctl line 3362. What does it mean that source and target cannot be the same? If it got confused as to which public.test to use as source, how do I differentiate?

  Read the article

• How can I test blades in MVC Turbine with Rhino Mocks?

  - by Brandon Linton

  I'm trying to set up blade unit tests in an MVC Turbine-derived site. The problem is that I can't seem to mock the IServiceLocator interface without hitting the following exception: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) at System.Reflection.Emit.TypeBuilder._TermCreateClass(Int32 handle, Module module) at System.Reflection.Emit.TypeBuilder.CreateTypeNoLock() at System.Reflection.Emit.TypeBuilder.CreateType() at Castle.DynamicProxy.Generators.Emitters.AbstractTypeEmitter.BuildType() at Castle.DynamicProxy.Generators.Emitters.AbstractTypeEmitter.BuildType() at Castle.DynamicProxy.Generators.InterfaceProxyWithTargetGenerator.GenerateCode(Type proxyTargetType, Type[] interfaces, ProxyGenerationOptions options) at Castle.DynamicProxy.DefaultProxyBuilder.CreateInterfaceProxyTypeWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options) at Castle.DynamicProxy.ProxyGenerator.CreateInterfaceProxyTypeWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options) at Castle.DynamicProxy.ProxyGenerator.CreateInterfaceProxyWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options, IInterceptor[] interceptors) at Rhino.Mocks.MockRepository.MockInterface(CreateMockState mockStateFactory, Type type, Type[] extras) at Rhino.Mocks.MockRepository.CreateMockObject(Type type, CreateMockState factory, Type[] extras, Object[] argumentsForConstructor) at Rhino.Mocks.MockRepository.Stub(Type type, Object[] argumentsForConstructor) at Rhino.Mocks.MockRepository.<>c__DisplayClass1`1.<GenerateStub>b__0(MockRepository repo) at Rhino.Mocks.MockRepository.CreateMockInReplay<T>(Func`2 createMock) at Rhino.Mocks.MockRepository.GenerateStub<T>(Object[] argumentsForConstructor) at XXX.BladeTest.SetUp() Everything I search for regarding this error leads me to 32-bit vs. 64-bit DLL compilation issues, but MVC Turbine uses the service locator facade everywhere and we haven't had any other issues, just with using Rhino Mocks to attempt mocking it. It blows up on the second line of this NUnit set up method: IRotorContext _context; IServiceLocator _locator; [SetUp] public void SetUp() { _context = MockRepository.GenerateStub<IRotorContext>(); _locator = MockRepository.GenerateStub<IServiceLocator>(); _context.Expect(x => x.ServiceLocator).Return(_locator); } Just a quick aside; I've tried implementing a fake implementing IServiceLocator, thinking that I could just keep track of calls to the type registration methods. This won't work in our setup, because we extend the service locator's interface in such a way that if the type isn't Unity-based, the registration logic is not invoked.

  Read the article

• php symfony and apache2 - inst't serving .phtml

  - by pmoniq

  Hi, I have a problem with apache2 settings (Ubuntu system). I would like to run symfony project on my localhost but instead of serving .phtml files, browser is trying to download files. this is my file .host: 127.0.0.3 test this is apache2/sites-available/default file < VirtualHost 127.0.0.3:80 ServerName test DocumentRoot "/home/m/Pr/workspace/php/test/web" DirectoryIndex frontend_dev.php < Directory "/home/m/Pr/workspace/php/test/web" AllowOverride All Allow from All Alias /sf /home/m/Pr/workspace/php/test/lib/vendor/symfony/data/web/sf < Directory "/home/m/Pr/workspace/php/test/lib/vendor/symfony/data/web/sf" AllowOverride All Allow from All </Directory> and this is .htaccess in /test RewriteEngine On RewriteRule ^(.*)$ /web/$1 Options +FollowSymLinks +ExecCGI AddHandler application/x-httpd-php5 .php .phtml and this is .htaccess in /test/web Options +FollowSymLinks +ExecCGI RewriteEngine On # uncomment the following line, if you are having trouble # getting no_script_name to work RewriteBase / # we skip all files with .something #RewriteCond %{REQUEST_URI} ..+$ #RewriteCond %{REQUEST_URI} !.html$ #RewriteRule .* - [L] # we check if the .html version is here (caching) RewriteRule ^$ index.html [QSA] RewriteRule ^([^.]+)$ $1.html [QSA] RewriteCond %{REQUEST_FILENAME} !-f # no, so we redirect to our front web controller RewriteRule ^(.*)$ index.php [QSA,L] Another problem is I think apache don't read .htaccess files. What am i doing wrong? Maybe I forgot about something? Please, help me becouse i have no idea.

  Read the article

• Subversion 1.6 + SASL : Only works with plaintext 'userPassword'?

  - by SiegeX

  I'm attempting to setup svnserve with SASL support on my Slackware 13.1 server and after some trial and error I'm able to get it to work with the configuration listed below: svnserve.conf [general] anon-access = read auth-access = write realm = myrepo [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasl2/my_sasldb mech_list: DIGEST-MD5 sasldb users $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP test@myrepo: userPassword You'll notice that the output of sasldblistusers2 shows my test user as having both an encrypted cmusaslsecretOTP password as well as a plain text userPassword passwd. i.e., if I were to run strings /etc/sasl2/my_sasldb I would see the test users' password in plaintext. These two password entries were created with the following subversion book recommended command: saslpasswd2 -c -f /etc/sasl2/my_sasldb -u myrepo test After reading man saslpasswd2 I see the following option: -n Don't set the plaintext userPassword property for the user. Only mechanism-specific secrets will be set (e.g. OTP, SRP) This is exactly what I want to do, suppress the plain text password and only use the mechanism-specific secret (OTP in my case). So I clear out /etc/sasl2/my_sasldb and rerun saslpasswd2 as: saslpasswd2 -n -c -f /etc/sasl2/my_sasldb -u myrepo test I then follow it up with a sasldblistusers2 and I see: $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP Perfect! I think, now I have only encrypted passwords.... only neither the Linux svn client nor the Windows TortoiseSVN client can connect to my repo anymore. They both present me with the user/pass challenge but that's as far as I get. TLDR So, what is the point of SVN supporting SASL if my sasldb must store its passwords in plaintext to work?

  Read the article

• In a Rails unit test, how can I get a User fixture to load its associated Profile?

  - by MikeJ

  In the documentation concerning Fixtures (http://api.rubyonrails.org/classes/Fixtures.html) they provide the following example of using label references for associations: ### in pirates.yml reginald: name: Reginald the Pirate monkey: george ### in monkeys.yml george: name: George the Monkey pirate: reginald So following their lead, I have a User model that has_one :profile, a Profile model that belongs_to :user, and tried to set up fixtures per their example: ### in users.yml reginald: id: 1 login: reginald ### in profiles.yml reginalds_profile: id: 1 name: Reginald the Pirate user: reginald (Note: since my association is one-way, the User fixture doesn't have a "profile: reginalds_profile" association--putting it in causes an error because the SQL table has no profile_id attribute.) The problem is, in my unit tests everything seems to load correctly, but users(:reginald).profile is always nil. What am I missing?

  Read the article

• How to run NUnit test in MonoDevelop 2.2 in Ubuntu 10.04?

  - by Jader Dias

  I was following a tutorial but I can't find the option to run tests.

  Read the article

• Freeradius authentication failed for unknown reason

  - by Moein7tl

  I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

  Read the article

• Web service SSL handshake fails in production environment unless SSL debugging enabled

  - by JST

  Scenario: calling a client web service over SSL (https) with mutual SSL authentication. Different service endpoint URLs and certs (both keystore and truststore) for test vs. production environments. Both test and production environments run tomcat / JBoss clustered. Production environment has load balancing / BigIP, runs Blade and non-Blade machines. Truststore is set (using -Djavax.net.ssl.trustStore=value) at startup. Keystore is set using System.setProperty("javax.net.ssl.keyStore", "value") in Java code. Web service call made using Axis2. All works fine in test environment, but when we moved to production environment (6 servers), it appears certs are not being forwarded for the handshake. Here's what we've done: in test environment, handshake using test versions of certs has been working all along, with no ssl debugging enabled confirmed in test environment that handshake with client production endpoint succeeds (production certs, both ours and theirs, are fine) -- this was done using -Djavax.net.debug=handshake,ssl confirmed that the error condition occurs on all 6 production servers took one server out of the cluster, turned on ssl debugging for just that one (with a restart), hit it directly, handshake works! switched to a different server without the debugging turned on, handshake error condition occurs turned debugging on on that second server (with a restart), hit it directly, handshake works! From the evidence, it seems like somehow the debugging being enabled causes the certificates to be properly retrieved/conveyed, although that makes no sense! I wonder whether somehow the enabled debugging makes the system pay attention to the System.setProperty call, and ignore it otherwise. However, in local and test environments, handshake worked without debugging enabled. Do I maybe need to be setting keystore on server startup like I'm setting truststore? Have been avoiding that because the keystore will differ for each of our test environments (16 of them).

  Read the article

• How do you test your blackberry application on the device?

  - by Kai

  This may sound very noobish, but I can't seem to get my app to my blackberry. I was trying to follow the beginning blackberry development book's guide, but maybe I just missed the point somewhere. For remote download, Is it really as simple as drop the COD and JAD files in the same folder on your server then just navigate to the URL with your device's browser? The book says it should prompt a download screen, but all I get is a page full of cryptic characters. My app is a simple slideshow. Uses no signed things and is not MDS enabled. Did I forget something? Any help would be appreciated. Thanks

  Read the article

• I added a new XML file to my solution, but when I press F5 to test it I can't find the .xml file in

  - by Sergio Tapia

  What can be the problem here?

  Read the article

• Tools to test softwares against any attacks for programmers ?

  - by berkay

  in these days, i'm interested in software security. As i'm reading papers i see that there are many attacks and researchers are trying to invent new methods for softwares to get more secure systems. this question can be a general including all types of attacks.There are many experienced programmers in SO, i just want to learn what are using to check your code against these attacks ? Is there any tools you use or you don't care ? For example i heard about,static,dynamic code analysis, fuzz testing. SQL injection attacks Cross Site Scripting Bufferoverflow attacks Logic errors Any kind of Malwares Covert Channels ... ... thanks

  Read the article

• Should I unit test the model returned by DefaultModelBinder?

  - by Byron Sommardahl

  I'm having some trouble unit testing the model returned by DefaultModelBinder. I want to feed in a fake form collection and check the model that it returns to make sure model properties are being bound properly. In my research, I'm not turning up -any- resources on testing the DefaultModelBinder. Maybe I'm missing something. Maybe I shouldn't be testing this part of MVC? Your thoughts?

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >