Search Results

Search found 5185 results on 208 pages for 'just asking'.

Page 154/208 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• Get Safari to use different autocompletion on different URLs on same hostname

  - by Luke404

  I have a webserver publishing different services over the same SSL VirtualHost, the two most commonly used being PhpMyAdmin and Cacti. These (and others) use 'cookie' style authentication, asking user and password in an HTML form (thus not using HTTP Authentication). Being on the same hostname, the Safari browser didn't manage too well stored passwords: if I login to one app with user foo, and then go to app two it would propose me user foo and its password in the login form. Changing just the username to bar used to be sufficient to let Safari autocomplete the correct password in its form field. Annoying, but I could live with it - usernames are short and easy to remember when compared to the passwords we use. After the update to safari5 this seems to be no longer true: if I store in safari (actually user keychain on OSX) credentials for https://www.foobarbaz.com/app1 AND credentials for https://www.foobarbaz.com/app2 there seem to be no way for it to autocomplete both based on the url. Even editing the keychain to add the path (it will store only the hostname by default) does not help. Is there anything I can do to let it work the way I want while still keeping everything on one hostname? Modifying anything server side is of course possible, but I can't switch apps to HTTP Auth (and not every one will support it anyway) to use different 'realms'.

  Read the article

• How do I calculate the cost of printing a given page?

  - by Alenanno

  I have seen questions like How much does a square inch of ink cost and How much more will a high-dpi image cost to print?, but mine isn't asking neither about a specific case, nor about how much something costs, as that would depend on the toner, for example. Rather, I was wondering how should I go about calculating the cost of printing a given page. Note that "given page" should be seen as a sort of x, i.e. the answer should be applicable in any case; I'd like this question to provide a good reference for those who want to calculate this cost. What should be taken into consideration? The cost of a single page (the paper only) is easily checkable, since you divide the cost of the whole package for the number of pages in the package itself. But how do I calculate the cost of the ink/toner? Which could translate to: how do I calculate the Ink Density1 for a given printer? I know it depends on quality of the printer itself, the type, the quality of the image being printed, the very nature of what I'm going to print, etc. But again, the focus of my question is not on the variables of this case, but rather the constants, hoping the math simile works for this case too. 1: Total amount of ink in one area of the page.

  Read the article

• Are there compact external USB audio interfaces which are better than a on-board sound?

  - by rumtscho

  I am asking this for a friend. He loves his voice recognition software and dictates a lot of text using a headset. Now he has a new laptop, which only has a combined mic/headphones output, and wanted to buy an adapter. I told him to get an external USB sound interface instead, as the better sound quality will probably increase the hit rate of the voice recognition. He agreed, but when he saw a picture of the SoundBlaster X-Fi, he said that it is way too big, because he wants to carry the thing everywhere. He'd rather have one of these small things which are the size of a flash memory stick, with only one mic and one phones output, period. Now I am not sure whether these mini interfaces would produce a sound better than onboard sound. They all seem to come not from established audio interface manufacturers, but from electronic accessories manufacturers like Speedlink, or just noname brands. Is there a compact audio interface with good A/D quality (it is OK if the price is comparable to that of the bigger interfaces, even if there is no additional functionality like Chinch in-/output etc)?. And if there isn't, will the noname soundcardsticks offer any advantage over a simple adaptor for the onboard sound?

  Read the article

• What are these isolated resource requests in Apache's access_log?

  - by Greg

  I was looking at my Apache access log and came across some strange requests. A single IP address will access several resources (mostly css style sheets and images), but no actual pages. Sometimes they are requesting a resource that no longer exists on the server, or one that is still under the web root but no longer used (e.g. a resource in an old WordPress theme). Also: The requests list no referrer I get no useful information on the IP address by looking it up There doesn't seem to be any pattern among the IP addresses that are making these requests (e.g. different countries) Are these just links from a stale cache somewhere? Could it be a sign of an attack of some sort? Here is a typical example: GET /wp-content/themes/my-theme/images/old-image.gif HTTP/1.1" 500 809 "-" "Mozilla/4.0 (compatible;)" This was one of about 10 similar requests, some for existing resources, some for older resources. There is no other sign of this IP address in access_log. Note the internal server error, which is a topic for a different thread. What I'm asking here is where would isolated requests like this come from?

  Read the article

• nginx - proxy_pass is working - Apache isn't doing what it should...

  - by matthewsteiner

  So, I've got this in my nginx.conf: location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/example.com/public/; access_log off; expires 30d; } location / { proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } So anything that is a "static file" that exists will just be done with nginx. Otherwise, it should pass it off to Apache. Right now, static files are working correctly. However, if something is passed to apache and it's example.com or subdomain.example.com, apache just spits out the "Apache 2 Test Page" that you get if there's nothing there. Apache worked fine before, so I'm guessing it has to do with the way nginx is "asking". I'm not sure though. Any ideas?

  Read the article

• Why is dwm.exe using so much memory?

  - by Leonard Challis

  I've scoured the web, but I'm sick of reading "scan your computer for viruses" and "upgrade your RAM" on answers to similar questions to this. I understand that dwm.exe is for (simply put) caching bitmaps for things like Aero-peek and similar, but as far as I have read it shouldn't be using vast amounts of memory. My colleague and I both have 4GB of RAM, Core 2 Duo, blah, blah -- essentially they're pretty capable. His dwm.exe is running at around 30mb, mind is currently running at about half a gig, though it does fluctuate quite a lot. This is the same while running the exact same applications (currently Zend studio, FireFox (with firemin - low memory usage), Outlook). Every so often I will get a notification asking me if I want to switch to Aero Basic because it's using too much memory, and sometimes it will just switch itself to basic and let me know why. I know it's possible to stop it switching, but I want to know why it is using too much memory otherwise it's just papering over the cracks. One thing to add is this seems to have started after a robbery on Monday, where two of my monitors were stolen, and I had to temporarily use a couple of alternative monitors. I am now using brand new monitors but the problem is the same. All drivers installed and working seemingly fine. Any ideas why the usage is so high? We are using windows 7 64-bit Professional.

  Read the article

• Why would I need a firewall if my server is well configured?

  - by Aitch

  I admin a handful of cloud-based (VPS) servers for the company I work for. The servers are minimal ubuntu installs that run bits of LAMP stacks / inbound data collection (rsync). The data is large but not personal, financial or anything like that (ie not that interesting) Clearly on here people are forever asking about configuring firewalls and such like. I use a bunch of approaches to secure the servers, for example (but not restricted to) ssh on non standard ports; no password typing, only known ssh keys from known ips for login etc https, and restricted shells (rssh) generally only from known keys/ips servers are minimal, up to date and patched regularly use things like rkhunter, cfengine, lynis denyhosts etc for monitoring I have extensive experience of unix sys admin. I'm confident I know what I'm doing in my setups. I configure /etc files. I have never felt a compelling need to install stuff like firewalls: iptables etc. Put aside for a moment the issues of physical security of the VPS. Q? I can't decide whether I am being naive or the incremental protection a fw might offer is worth the effort of learning / installing and the additional complexity (packages, config files, possible support etc) on the servers. To date (touch wood) I've never had any problems with security but I am not complacent about it either.

  Read the article

• How to rename network printer on Windows 7?

  - by Adrian McCarthy

  This question is similar to How do you rename a printer device in Windows 7 64 bit, except the answers there do not work, and I'll provide more information. This is a home network, not a domain. I have set up a Brother HL-5170DN. It is a network printer connected directly to an Ethernet hub. I can connect to it with Windows 7, but on Windows 7 it defaults to the name "binary_p1 on Brn37415f", which isn't very useful. And I cannot seem to change the name. I have it working with several Windows XP and Vista machines, and I can change the name on those machines. On Windows 7 Printer properties: I can see the "binary_p1" name on the General tab. I can select the text, but I cannot change it. The field is not grayed out, but I cannot type anything into it. On the Ports tab, all of the controls are grayed out (disabled). The selected Port is called "\\Brn_37415f\binary_p1", and it's described as "Client Side Rendering Provider" and the printer field says "binary_p1". On the Security tab, I can see that my account has "Manage this printer" permissions. If I choose Printer Server Properties, I can select the port and click Configure Port, but I get a dialog that says, "An error occurred during port configuration. This option is not supported." I have found many forums with people asking the same question without getting an answer. Update: No more bounties to offer, but I'm still looking for a solution to this problem.

  Read the article

• How to make a bootable USB drive out of a bootable DVD or CD

  - by Svish

  Is there a "universal" way of how you can make a bootable USB drive out of a bootable dvd or cd? What makes a USB drive bootable? What makes a dvd and cd bootable? For example there is a program called UNetBootin which can make bootable USB drives, but seems like it only works with various linux distributions. (Tried it with a Win7 image and the SystemRescueCD, which didn't work so well...). Main reason I ask is that I have a Support DVD which came with an Asus EEE, and it of course doesn't have an external dvd drive. So I am curious if I can sort of move that dvd over to a USB drive so that I can use it without buying one. Not asking just specifically about this one case though, I am curious to know a bit more about this in general. So, if you have a general bootable DVD or CD (Or a DVD or CD image for that matter), could be linux distro, windows install disk, support disks, etc., is it possible to "move" it over to a USB drive and make that work like the DVD or CD did? (Being bootable and all).

  Read the article

• Group Policy for DNS Server Addresses

  - by John

  This question deals strictly with the methodology of using Active Directory to publish DNS settings and controlling the DNS server address order to domain attached clients. This is not asking about if this is the right function, role, or best use of group policy; but rather, how to make it work. I would like to be able to publish in group policy DNS addresses and possibly control the order in which the client consumes the addresses. I have tried following the information from this site without success. I set the following setting within group policy, but the client never shows the settings within the TCP/IP properties. Computer Configuration/Administrative Templates/Network/DNS Client/DNS Servers I did list them as a single space separated list. For example, the following: 192.168.0.1 192.168.10.3 192.168.34.2 192.168.2.67 192.168.56.99 192.168.99.23 This would be for Windows 7, Windows Server 2003, and Windows Server 2008 clients. I am not sure what I am doing wrong or how to get this to work. Am I missing a setting? Do I need to set something differently?

  Read the article

• Does a VPN requirement kill the concept of having a Web Application in the Cloud?

  - by Christian

  Recently I posted a question in SO, but so far I got no answers. I wonder if I'm asking the wrong question. This is the problem: We need to design an application which offers a public http web service, but at the same time it must consume some services through a VPN connection from other existing company. There is no other alternative but to use a VPN connection to access those services. We want to host our application in some cloud infrastructure like Heroku or Amazon EC2. But there is no direct way to access the VPN services of the other company from there. The solution I'm thinking, but I don't like is to have a different server to expose the services from that VPN. But this will require the setup of another server which I prefer to avoid. In the case this is the solution, can I use an Amazon EC2 instance to connect to a VPN? This is what I was thinking, is it correct? I don't have experience using VPNs, tunnels or those kind of networking stuff. I will really appreciate if you can propose me an alternative solution, or just give me a comment.

  Read the article

• ssh many users to one home

  - by filippo

  Hiya, I want to allow some trusted users to scp files into my server (to an specific user), but I do not want to give these users a home, neither ssh login. I'm having problems to understand the correct settings of users/groups I have to create to allow this to happen. I will put an example; Having: MyUser@MyServer MyUser belongs to the group MyGroup MyUser's home will be lets say, /home/MyUser SFTPGuy1@OtherBox1 SFTPGuy2@OtherBox2 They give me their id_dsa.pub's and I add it to my authorized_keys I reckon then, I'd do in my server something like useradd -d /home/MyUser -s /bin/false SFTPGuy1 (and the same for the other..) And for the last, useradd -G MyGroup SFTPGuy1 (then again, for the other guy) I'd expect then, the SFTPGuys to be able to sftp -o IdentityFile=id_dsa MyServer and to be taken to MyUser's home... Well, this is not the case... SFTP just keeps asking me for a password. Could someone point out what am I missing? Thanks a mil, f. [EDIT: Messa in StackOverflow asked me if authorized_keys file was readable to the other users (members of MyGroup). Its an interesting point, this was my answer: Well, it wasn't (it was 700), but then I changed the permissions of the .ssh dir and the auth file to 750 though still no effect. Guess it's worth mentioning that my home dir ( /home/MyUser) is also readable for the group; most dirs being 750 and the specific folder where they'd drop files is 770. Nevertheless, about the auth file, I reckon the authentication would be performed by the local user on MyServer, isn't it? if so, I don't understand the need for other users to read it... well.. just wondering. ]

  Read the article

• Xbox Music ignores Asus FN media keys in Desktop Mode

  - by Ruud Lenders

  I have an Asus PRO64JQ laptop, and I recently upgraded to Windows 8. The FN keys stopped working, so I tried to install default drivers using the CD that came with my laptop. Unfortunately, the CD does not support Windows 8. Asus Support does not help me either. It seems that Asus does not support Windows 8 on my model, since I can't find it in their list of Windows 8 upgradable models. Also, the support page of my laptop does not allow me to select Windows 8 as OS. That's why I'm asking my question here. I fixed (most of) the FN keys by installing the ATKPackage, and I was happy to find out that the media keys (play/pauze, next, previous) works with the Xbox Music app. But the keys only work in the Metro UI. In Desktop Mode, pressing FN+? (play/pause) starts up Windows Media Player. Disabling Windows Media Player through the control panel stops it from popping up, but Xbox Music still only responds to them in the Metro UI. I remember that I had similar problems when I tried to make these media keys to work with iTunes on Windows 7. The fix there was a small iTunes plug-in. So tell me, do you know how to fix my problem? Thanks.

  Read the article

• Having problems VPN'ing into our Windows server network.

  - by Pure.Krome

  Hi folks, When two people (on their notebooks) try to VPN to our office, only the first user gets a connection. the second user always times out. Is it possible for VPN to allow two or more people, using / sharing the same EXTERNAL PUBLIC IP to connect/authenticate? Now for some specifics (cause those two statements are very broad). I'm not in the IT Dept. I'm a developer. Our IT Dept don't really care (sigh) so it's up to me to fix this crap. Our office is all Microsoft shop stuff - servers and clients. We also have a firewall (watchguard brand?) and some other crazy setups (yes i know, it's very vague :( ). So i'm wondering - is it possible for multiple users, from the same public IP, to connect via VPN to a windows server? i'm under the impression - yes. But it is possible that this only happens when the clients (who are all behind the single, public IP .. otherwise they will have their OWN ip's) need to have UPnP running or something? this is killing me and i need to start asking the right questions cause these guys don't know what they are doing and i can't work without this happening. I know this is a vauge question with so many 'if-what's-etc' but maybe some questions/suggestions from you guys might start to lead to solving this problem. EDIT: Network Connection: WAN Miniport (PPTP)

  Read the article

• Method to integrate Powershell scripts with non-Windows workflow?

  - by Matt Simmons

  I love the smell of new machines in the morning. I'm automating a machine creation workflow that involves several separate systems across my infrastructure, some of which involve 15 year old perl scripts on Solaris hosts, PXE Booting Linux systems, and Powershell on Windows Server 2008. I can script each of the individual parts, and integrating the Linux and Unix automation is fairly straightforward, but I'm at a loss as to how to reliably tie together the Powershell scripts to the rest of the processes. I would prefer if the process began on a Linux host, since I imagine that it will end up as a web application living on an Apache server, but if it needs to begin on Windows, I am hesitantly okay with that. I would ideally like something along the lines of psexec for Linux to run against Windows, but the answer in that direction appears to by Cygwin, and as much as I appreciate all of the hard work that they put in, it has never felt right, if you know what I mean. It's great for a desktop and gives a lot of functionality, but I feel like Windows servers should be treated like Windows servers and not bastardized Unix machines (which, incidentally, is my argument against OSX servers, too, and they're actually Unix). Anyway, I don't want to go with Cygwin unless that's the last and only option. So I guess what I'm asking is if there is a way to execute jobs on Windows machines from Linux. Without Cygwin. I'm open to ideas and suggestions, including "Look idiot, everyone uses Cygwin, so suck it up and deal with it". Thanks in advance!

  Read the article

• How can I store logs and meet compliance requirements for free?

  - by Martin

  I am trying to keep long-term logs of an app in such a way, that it could plausibly demonstrated to third parties/court that the application has processed certain data at a given time. The data can be represented in XML or text format. A simple gzipped log is not plausible, as I may have added or modified data afterwards, whereas an external logging service would be an overkill. Cost is an issue, we are not dealing with financial data or so, but rather some simple user generated content, where some malicious users tried to blame the operator in the past when things escalated and went to court. My question: Is there some kind of signing software for Linux that signs each element of a log in such a way, that it can be easily shown that no element can be added or modified afterwards? Plug-Ins into some free Splunk Alternatives would be fine too. Ideally the software I am looking for should be under a GPL or similar license. I could probably achive something like this by using PGP/GPG sgning functions and including the previous elements signituares within the following element, but I would prefer to use some program where you do not have to argue about the validity of your own code. Note to mods: I am not asking this question on Stackoverflow, because I am not looking for writing own code for reasons described above. I think this question rather fits into serverfault than superuser, as server-side logging software is discussed rather here than on superuser.

  Read the article

• Outlook 2007 + Exchange 2010 (Save All Attachments)

  - by RobertPitt

  About 3 weeks back our company upgraded our mail system to Exchange 2010, all went smooth, few issues but nothing major. A few days ago we had a call from a colleague where he was unable to save all attachments, From File > Save As > Save All Attachments. When the email has a single attachment it works perfectly normal, and depending on the file type it allows you to save multiple attachments. But there's a lot of file types that will not work, such as zip, pdf, doc etc, Usually we get a location box open up asking where we would like to drop the attachments, but it does nothing, You click Save All Attachments and nothing happens. After hours of research I have come across mixed results, a lot of people on forums have been explaining that they have recently crossed over to Exchange 2010 and there issues started there. But on the other hand Microsoft released a KB (278188) which was depressing if that, but that article was published in 2007, as stated by the time stamp, and Exchange 2010 has only come out recently. Im looking to see if you guys have any clues what could be causing this, anything server side that I can take a look at (AD, Exchange, ...). Any help on this is greatly supported

  Read the article

• How browsers handle multiple IPs

  - by Sandman4

  Can someone direct me to information on exact browsers behavior when browser gets multiple A records for a given hostname (say ip1 and ip2), and one of them is not accessible. I interested in EXACT details, like (but not limited to): Will browser get 2 IPs from OS, or it will get only one ? Which ip will browser try first (random or always the first one) ? Now, let's say browser started with the failed ip1 For how long will browser try ip1 ? If user hits "stop" while it waits for ip1, and then clicks refresh which IP will browser try ? What will happen when it times-out - will it start trying ip2 or give error ? (And if error, which ip will browser try when user clicks refresh). When user clicks refresh, will any browser attempt new DNS lookup ? Now let's assume browser tried working ip2 first. For the next page request, will browser still use ip2, or it may randomly switch ips ? For how long browsers keep IPs in their cache ? When browsers sends a new DNS request, and get SAME ips, will it CONTINUE to use the same known-to-be-working IP, or the process starts from scratch and it may try any of the two ? Of course it all may be browser dependent, and may also vary between versions and platforms, I'd be happy to have maximum of details. The purpose of this - I'm trying to understand what exactly users will experience when round-robin DNS based used and one of the hosts fails. Please, I'm NOT asking about how bad DNS load balancing is, and please refrain from answering "don't do it", "it's a bad idea", "you need heartbeat/proxy/BGP/whatever" and so on.

  Read the article

• Choose a VPN software on CentOs 6.5

  - by loyCossou

  We are installing a SMS gateway with Kannel, on a CentOs 6.5 server, which is supposed to connect via SMPP to our local operators. Kannel is working fine and no probleme there. Now 2 operators are asking to connect via a VPN for obvious security reasons; actually they asked for or VPN details so they can connect to it... Now, I am looking for a free VPN that I can setup and configure on our server... I saw Open VPN that I already started configuring, no issue... But just saw on Wikipedia (http://en.wikipedia.org/wiki/OpenVPN#Platforms) that OpenVPN is not compatible with other VPN packages. Now my question is: 1- I am absolutely new to VPN technologies. Is OpenVPN a good choice in my situation? 2- If I configure OpenVPN on my server, will it be possible to any client to connect to my server? 3- Anyone have any advice for me? Thank you for this great community.

  Read the article

• Windows recovery partition with GRUB2

  - by Actorclavilis

  So I recently got a new Toshiba laptop and installed Ubuntu 12.04 on it. Since it is a "Windows 7 Enabled" machine or some other proprietary nonsense like that, a few hardware features are designed only to work with W7. Eventually I found a way to enable these hardware functions by booting into the W7 recovery disc; however, they sporadically stop working. I'm moderately surprised that I was able to get anything to work at all, so I don't especially want to spend more time fixing the problems in a different fashion. Now I don't actually own the recovery disc; it's my father's. Since it's a pain to have to go asking for the disc every time the features stop working, I made an image of the disc and was hoping to make a 'recovery' partition like some computers have. However, unetbootin and GRUB2 both want a kernel and initrd to point to on startup, and something like set root=(hd0,1) loopback lo /w7r.iso set root=(lo) chainloader +1 in the spirit of the makeactive/ chainloader +1 commands that I used to use to dual-boot Linux and Windows simply gives me a file-not-found error. My question, therefore, is: Is it possible to, having written a Windows iso to a partition (such as with dd if=w7r.iso of=/dev/sda4) to a partition, convince GRUB2 to boot from it? Thanks in advance.

  Read the article

• Freebsd jail for an small company - checklist - what shouldn't forget

  - by cajwine

  Looking for an checklist for an "small company freebsd/jail server". Having pretty common starting point: FreeBSD jail (remote/headless) for the company: public web, email, ftp server, and private (maybe in the future partially public) wiki (foswiki) 4 physical persons, (6 email addresses) + one admin - others will never use ssh) have already done usual hardening on the host side (like pf, sshguard etc). my major components are: dovecot, exim, apache22, proftpd, perl5.14. Looking for an checklist, what I shouldn't forget. My plan: openssl self-signed certificates for exim, dovecot and proftpd (wildcard keys) openssl self-signed certificate for apache (later will go for "trusted-signed" key) My questions are: is is an "good practice" having one pair of wildcard SSL-certificates for many programs? (exim, dovecot, proftpd) - or should I generate one key for each service? should I add all 4 persons as standard (unix) users, or I should go with virtual users? Asking because: have only small count of users, and it is more simple to configure everything (exim, dovecot) for local users ($HOME/Maildir), plus ability to set $HOME/.forward/vacation and etc. is here some (special) things what I should consider? (e.g. maybe, in the future we want setup our own webmail - will make this any difference?) any other recommendation? Thank you, hoping that this question fit into the http://serverfault.com/faq under the: Server and Business Workstation operating systems, hardware, software Operations, maintenance, and monitoring Looking for an checklist, but please explain why you're recommending it. See Good Subjective, Bad Subjective. related: What's your suggested mail server configuration for a FreeBSD server?

  Read the article

• Salary Survey Entry Level network position [closed]

  - by will

  Hello, I started interning with a company about 5 months ago and for the past 7 months I have been a normal part time employee. This week I have a review, where I am hoping to get a raise. I started at $8 interning, and now I'm up to $13. What I am trying to figure out is how to survey what others are making in similar positions so I can take it to the review as a base number. here are my thoughts on my position right now. Review Thoughts My Qualifications: • Associates of applied Science - IT network Specialist • CompTIA A+ certification • CompTIA Server+ certification • CompTIA Network+ certification • Currently pursuing Cisco certifications • Junior status at Insert college Pursuing Bachelors in Information Technology with an emphasis in Networking. 3.4 GPA • 1 year of working at Insert Company. My contributions to Insert Company • Offering near fulltime through semester and fulltime through summer. • Ability to work after hours and on weekends • Developed and support helpdesk system • Set up and maintain Update server to keep desktop clients up to date • Deployed and maintain antivirus solution for end users • Assist with main projects such as SAN, Virtualization, and network survey. Any tips on determining an asking number would help. I was thinking $17-$18, am I way off here? • Migrating end user stations to Windows 7 (current project) • Developing imaging solution for Desktop PCs (current project)

  Read the article

• Opera's problem with magnet-links

  - by Dmitriy Matveev

  I've encountered following problem while using Opera web browser: When I click on a magnet link on some web page like magnet:?xt=urn:tree:tiger:CXW6MJFRNOEFU2STCBWWOIYZLVCR2FTR37SQCXY&xl=352342016&dn=ER%20-%207x16%20-%20Witch%20Hunt.avi Opera is asking me if I want to open that link with my DC++ client. If I click 'Yes' button then my DC++ client is correctly "opening" the clicked magnet link and performing some action on it. There is also an option "Do not show this dialog again" in Opera's dialog, but it doesn't seem to be working correctly. If I check that option before answering 'Yes' and then click on other magnet link of the same kind the Opera will again ask me about how to open new link. I haven't found protocol association in 'Control Panel Default Programs Set Associations' part of my Windows Vista settings, but if I paste magnet link in "Run" dialog then Vista will handle that link perfectly. I've tried to find out how to manually set protocol association in Opera and found 'Programs' page of browser's advanced settings. There I discovered that instead of storing protocol to application associations Opera tries to store per-link associations (There are several entries with exact links as they was on web page as value of protocol field). If I click on the links which are already stored in Opera's protocols associations browser will ask me about them again. I haven't found any information on how to resolve this problem on the internet, maybe someone on this site will be able to help me.

  Read the article

• Failover Cluster Quorum Failing

  - by oruchreis

  Hi, I have two nodes which boots from iscsi to implement windows 2008 cluster. And I'm using disk majority option as quorum over iscsi. But when the quorum's iscsi connection failed(May be san server reset), the failover cluster is failed too. If I reset one of the nodes, it can open, but its system disk goes offline. I cant change its status as online, because it says that its reserved by failover cluster(disk is on iscsi, beacuse iscsi boot). And this disk works as readonly. Anything on it cant be deleted or written. So, I cant rejoin the node to the cluster again. I have to reinstall windows. So, what I'm asking is, how can I implement more quorum backup? I mean, can I use both disk majority and file share majority at same time? AFAIK, every nodes also keep the quorum's copy too. But I don't know sometimes san servers goes offline. And quorum's iscsi connection and nodes' iscsi connections get lost. So, nor the quorum that is kept in the nodes neither the quorum iscsi disk is not enough to start the cluster again. I want to use both disk majority and file share majority at the same time. Can I do this? Have you any other suggestion? Regards.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >