Search Results

Search found 5233 results on 210 pages for 'fulltext searching'.

Page 155/210 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• APC uptime 0 because of Fast

  - by demlasjr

  I have a VPS using Parallels/Plesk (11.0.9 Update #22, last updated at Oct 31, 2012 03:33 AM CentOS 6.3 (Final) x86_64) I have apache (CGI/FastCGI) installed and nginx as reverse proxy. Everything is working just fine. I installed APC for caching, but the issue is that the uptime is 0 always. It's restarting each 15 seconds or so. I checked everywhere and can't find a solution to fix it. The server have the grace restart enabled, but every 6 hours, which shouldn't influence the APC uptime. Searching in Google I found that this could be related to Apache, running with FCGId instead of FastCGI. Plesk/Apache is using this config file: usr/local/psa/admin/conf/templates/default/service/php_over_fastcgi.php which content is: <IfModule mod_fcgid.c> <Files ~ (\.php)> SetHandler fcgid-script FCGIWrapper <?php echo $VAR->server->webserver->apache->phpCgiBin ?> .p$ Options +ExecCGI allow from all </Files> Is here the issue or elsewhere ? How can I fix this to work with FastCGI and make APC working properly. I forgot to specify that even if the uptime is below one minute, APC is doing pretty good job caching (92% are hits).

  Read the article

• SSO "Portal"

  - by Clinton Blackmore

  Pursuant to my question on alleviating the password explosion, I've contacted some of the services to whom we are paying money to access their websites to ask if we could authenticate our own users, and some of them said yes and send me specs on how to do so. (One of the sites called such a system a page a "portal"; I've never heard the term used in quite that way.) It is simple enough that I am tempted to roll my own. The largest complication is that one site wants us to store a key for every user in our database (and I think the LDAP database makes sense) after their initial login. So, non-trivial, but doable. The nature of these sorts of tasks, I expect, is that if they start out small and simple, they don't end that way. There must be some software that addresses this that is readily extended, surely. In my searching, I've come across: SimpleSAMLphp JOSSO RubyCAS-Server Shibboleth Pubcookie OpenID [Wow, gee. I'd missed some of those in my previous searches! The wikipedia page on Central Authentication Services is useful, and the section on Alternatives to OpenID makes it look like there is a lot of choice.] Can anyone recommend any of these, or suggest ones to avoid? Internally, we are authenticating using Apple's Open Directory [ == OpenLDAP + Kerberos + Password Server (which, I believe, == SAML) ]. As far as extending/tweaking/advanced configuration of a system, I am able to program in Python, C++, can do some basic PHP, and may be able to remember some Java. Looks like I need to pick up Ruby at some point. Addendum: I would also like users to be able to change their passwords over the web (and for certain users to change passwords of other users).

  Read the article

• Allow opening a new tab with Ctrl+T on all websites in Firefox

  - by Martin J.H.

  In Firefox, certain websites and plugins (Adobe PDF Plugin) appear to "capture" the Control key, so that when I try to open a new tab using "Ctrl+t", nothing happens - or worse, something unexpected happens. Examples: On the Codecademy site, while editing code, Ctrl+T either does nothing, or (when Flash is disabled) switches the position of the two characters next to the cursor. When viewing PDF's with the Adobe PDF Plugin, Ctrl+T does nothing. Is there a way to disable this "feature"? I would like "Ctrl+t" to always "talk" to Firefox! Edit: After searching superuser deeper, this question is very similar to the questions: "How to prevent keystroke grabbing/hijacking by websites in Firefox?" "How do I prevent pages I visit from overriding selected Firefox shortcut keys?". The answers to these questions are interesting and relevant, but do not give a method on how to disable combinatinos such as "Ctrl+t". Maybe a modified Greasemonkey script is the easiest solultion. Edit 2 - Attempt at a solution The following UserScript (Use GreaseMonkey to install it) successfully captures Ctrl+t on some sites (Google Search site, for instance - PopUp "Gotcha" appears), but not on the Codecademy site. I found another question pertaining to this subject here: "How to forbid keyboard shortcut stealing by websites in Firefox". It was raised in 2010, and the consensus was: It can't be done. // ==UserScript== // @name Disable Ctrl T interceptions // @description Stop websites from highjacking keyboard shortcuts // // @run-at document-start // @include * // @grant none // ==/UserScript== // Keycode for 't'. Add more to disable other ctrl+X interceptions keycodes = [84]; var lastPressedButton = [0]; document.addEventListener('keydown', function(e) { //uncomment to find out the keycode for any given key // alert(e.keyCode ); if (keycodes.indexOf(e.keyCode) != -1 && e.ctrlKey) { e.cancelBubble = true; e.stopImmediatePropagation(); alert("Gotcha!"); } return false; });

  Read the article

• Two parts: linux startup script to connect to bluetooth and cron to keep it connected

  - by D.R.

  I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

  Read the article

• How can I trigger the creation of a new CLB file?

  - by Xperimental

  I'm currently having a problem with an application using COM running on Windows Vista. The application runs ok on one machine, but doesn't work on a similar configured machine. Both machines are virtual images originating from the same source image. While searching the registry for causes of this error, I came across the CLBVersion key in HKCR\CLSID which seems to have something to do with COM. The value of the key differs between the two machines (0x6 on the erroneous one, 0xc on the working one). Also there are files containing the same number in their filenames in the %SystemRoot\Registration directories of the machines. They are called R000000000006.clb and R00000000000c.clb respectively. I have already searched the windows event log for anything leading to the creation of those files (I have searched by the creation date of the files). Now a few questions regarding the registry keys and the files: Is it correct, that this is connected to COM? What is the function of the files? What causes the creation of a new "CLBVersion"? Is there a way for me to trigger the creation of a new CLB file? edit: I have now found out, that this has nothing to do with my application error. But I would still be interested in details about the registry key and the files. An installation of Visual Studio 2005 has brought the second machine to the same configuration (0xc in registry and file) as the other one.

  Read the article

• How to get german QWERTY on Windows?

  - by Arturas M

  Well I'm used to having the world standard keyboard which is qwerty and not qwertz... But on windows I can't find the choice for german input which would be qwerty, not qwertz. In linux there was german input with qwerty so it was fun. I believe it should be on Windows too? Cause i'm sick of this qwertz always having to correct and search for z or y... Yeah, I know, if Germans made a mistake, it wasn't loosing WW2... Edit: Maybe I wasn't clear enough, it's not about changing between different language inputs? It's about having all german keys in german input, just the z and y would be in the correct places like all the worlds keyboards use and like the US keyboard uses... Solution: Well unfortunately by searching everywhere and waiting for answers I couldn't find what I needed, so I came up with this solution - I used The The Microsoft Keyboard Layout Creator And created my own very custom layout by modifying the default german layout and switching places of z and y. In case somebody needs it and doesn't want to go the hard way, I decided to upload them, so here are the links to download and install the keyboard layout: http://www20.zippyshare.com/v/95071447/file.html http://rapidshare.com/files/3822150342/German%20QWERTY%202%20by%20Arturas%20M.zip It will appear as a choice under German input between languages in your language bar. If you just want to use this german layout, just remove all german layouts and install this one. Good luck and have fun using it!

  Read the article

• How can I set the CD audio volume in Linux?

  - by user1296362

  In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• How can I mount dd image of a partition?

  - by Puneet Arora

  I created a dd image of a partition (containing an HFS+ FS) of one of my disks (and not the entire disk) a few days ago using the following command - dd conv=sync,noerror bs=8k if=/dev/sdc2 of=/path/to/img How can I mount it? I tried the following but it doesn't work - mount -o loop,ro -t hfsplus /path/to/img /path/to/mntDir It gives me mount: wrong fs type, bad option, bad superblock on /dev/loop1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg | tail gives me - [5248455.568479] hfs: invalid secondary volume header [5248455.568494] hfs: unable to find HFS+ superblock [5248462.674836] hfs: invalid secondary volume header [5248462.674843] hfs: unable to find HFS+ superblock [5248550.672105] hfs: invalid secondary volume header [5248550.672115] hfs: unable to find HFS+ superblock [5248993.612026] hfs: unable to find HFS+ superblock [5248998.103385] hfs: unable to find HFS+ superblock [5249031.441359] hfs: unable to find HFS+ superblock [5249036.274864] hfs: unable to find HFS+ superblock Is there something wrong that I am doing? I tried searching on how to do this but all the results I get only talk about mounting a partition from within a full disk image, using the offset option with mount - none talk about the case where the image itself is that of a partition. Thanks. PS: I'm running 64bit Arch Linux, and the partition from the original disk /dev/sdc2 mounts fine.

  Read the article

• Blue screen error code 1000008e

  - by Kas

  I'm getting blue screens, mostly when trying to boot a program that required a lot of memory (games, photo editing software.) So far I've only managed to catch one set of error codes: BCCode: 1000008e BCP1: C0000005 BCP2: ADA393BA BCP3: E9BCEBC4 BCP4: 00000000 OS Version: 6_0_6002 Service Pack: 2_0 Product: 768_1 It's on a Sony VAIO Laptop VGN FW-41E, Vista OS service pack 2. Besides these codes it lists two 'temporary' files that were related with this crash: ...AppData\Local\Temp\WER-134925-0.sysdata.xml ...AppData\Local\Temp\WERDA66.tmp.version.txt When I googled these files some site said it was linked to a worm called 'yodo', but virus scans don't return any results (hitman pro, malware bytes, avast antivirus all turn up empty). Upon further searching about this yodo worm, I came across security stronghold where someone posted they had acquired this worm when downloading access and excel templates. Now, I actually did download templates for the same programs, they might have been the same, they may be related or I might be grasping at straws here. I have not noticed any issues other in performance as of late, just BSOD's when I start software that requires some memory, but I never had issues with these exact same programs before. Help and/or hints are required on how to actually figure out what's the root of this BSOD issue and how can I fix it. Do you reckon it's actually a virus? What program should be able to remove YODO worm stuff?

  Read the article

• How would I force Debian to use the physical sector size on a hard disk?

  - by Confused User

  I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

  Read the article

• Can't connect to MySQL on CentOS 5 Error 13 - Permission Denied

  - by abszero

  Ok, I have an install of CentOS 5 running as a GuestOS in VirtualBox. The network card for the Cent box is bridged with that of my host OS so that the boxes can see each other. Cent has an IP of 192.168.1.108 and my Host box has an IP of .104. Everything, with regard to networking, seems to be working properly as I can access the Drupal install that is on the Cent box from a web browser on my host box by navigating to http://192.168.1.108 however when I try to configure the database for Drupal through the Drupal install interface I am getting the Can't connect to MySQL error. First I thought this might of been a Firewall issue so I stopped iptables but that had no effect. I thought maybe the user I had setup did not have access to the server so I tried root and that did not work. Searching on the net said that I needed to provide a bind-address parameter to my.cnf so I did that with no change. (As a side note the length of my my.cnf file was MUCH shorter than the ones presented online. In fact under mysqld all I have are datadir, socket, user, and bind-address. Is this normal or should the file be more verbose?) After a few hours of messing with permissions and such I tried using 'localhost' as the value for the database server, from my HOST OS, and the Drupal install kicked off without a problem. So while my issue is resolved I am curious as to why 'localhost' works and why 192.168.1.108 did not? Is there something i need to do to specifically access the MySQL box via the aforementioned IP? Thanks.

  Read the article

• How do you do a keyword search the Services.msc (mmc) window in Windows 7?

  - by Warren P

  When you want to run a service, you have very limited capabilities, in all current Windows versions, as far as I can tell. I usually start Services by typing "services.msc" into the Start-Run box, on most versions of Windows, this works. I know how to click the "Name" column in the MMC view of Windows Services. If you know what the first few characters of a service name is, you can usually sort by the name, and type the prefix to scroll the list down (find Windows Search for example). This seems pretty weak to me, so I spent some time searching the interwebs for tools that do a better job of managing services. Usually I have a keyword that I know "fooWare" might be the keyword, and I need to find the (usually badly named) service and start it and stop it. This is often WAY too hard. The best I could do is "NET SERVICES" from the command line, and maybe add a grep in there, but that doesn't list every service, only a few of them. And the MMC snap-in in Win7 now has an Export List button, exporting to csv text file feature which I have used from time to time, to export and then search. I have thought of writing my own tool. I'm hoping a better "service manager" utility exists out there that sysadmins use. I'd like a search box at the top right corner, kind of the same way that the Add-Remove-Programs dialog in Win7 and Vista has a search facility. Does such a services utility exist out there?

  Read the article

• Problems with bash script, mysql inserts and launchd

  - by Armands

  ========= I am developing a automated system, which consists of 3 parts: mysql, bash and launchd. Bash script takes folders of work related stuff, zips, archives and puts info about them into database that is located on a local MAMP server. Everything works as expected when I run the script from terminal. But when I use Launchd to automatically run this script, it functions without errors and it does not put the values into database. I've tried to make logs of returned messages, but the logs end up being empty as the command has run the way it was supposed to. Any help would be appreciated! .plist contents <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.adevo.ari.zip</string> <key>ProgramArguments</key> <array> <string>/Volumes/Archive-Plus/B-ARCHIVE-PLUS/ZZ_UTILITY_FOLDER/Compress.sh</string> </array> <key>Nice</key> <integer>1</integer> <key>StartInterval</key> <integer>120</integer> <key>RunAtLoad</key> <true/> </dict> </plist> I made this .plist file just by searching the web.

  Read the article

• What do the readonly attributes in diskpart really mean?

  - by marzipan

  I am wondering exactly what the meaning is of the "Read-only" disk and volume attributes that you can twiddle in diskpart on Windows 7. I am trying to set up an external USB drive as an installation medium for my own software, so I'd like to protect it against casual or inadvertent changes by users who it is given to, so they don't screw up the installation files they might need in the future. From what I can tell by experimentation with diskpart, the volume read-only attribute is actually stored on the physical disk somewhere, because I can set it and it shows up when I take the drive to another machine. This is great because my users can't (easily) change any of the files on the volume, or format it from Windows explorer. However, the disk read-only attribute seems to be just an aspect of how the current machine is accessing the drive. When I set it I can no longer delete the volume in the disk via Disk Management, but when I take the drive to another machine, the attribute is no longer set and in Disk Management I can delete the volume on the disk. I guess I'm not that worried about my users doing that, but I am annoyed that I don't understand what these attributes are really doing. Another thing that I don't understand is that the "volume" read-only attribute actually seems to be global to the disk - if I have two volumes on the disk, and I set the readonly flag on one of them, then it gets set on the other one too. ?!? I have the feeling I'm not searching for the right docs - all I'm finding is diskpart docs that give the syntax for twiddling these attributes, not what they really mean. Any pointers would be very welcome! Thanks, Asa

  Read the article

• Windows 7 task bar stuck in hiding, how to fix?

  - by Rainer Blome

  In Windows 7, I use the "Auto-hide the task bar" feature. Usually, it works fine: As soon as the pointer touches the screen bottom, the task bar pops up. However sometimes, it refuses to rise. Pressing the "Windows" key (or Ctrl-ESC) makes the start menu appear, forcing the task bar from hinding as well. Once I've done this, the task-bar auto-rises again. This is annoying, it interrupts flow. Has anyone else noticed this? How do I avoid this? Searching for "Windows 7 task bar auto-raise" shows that at least one other person experienced this problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-can-i-fix-the-taskbars-auto-hide/8cdf6369-7354-4d29-9249-b7096ed0e28b?msgId=6dac3361-9d0f-4a9e-8642-b91a72826ba4 To answer the question posed by the "helpful" support engineer on the above page, of course I am running some apps when this happens, usually Explorer, Firefox, Eclipse, Cygwin/X, Xterm, Emacs, Notes, VPN client, Firewall. If my memory serves correctly, I have seen this behavior on earlier versions of Windows as well, XP at least. To reproduce this behavior, I tried switching between apps, and bringing apps to open other windows. I am unable to reproduce this behavior so far. So far, it appears to happen out of the blue, sometimes multiple times a day. Looks like a bug to me. The task bar should raise no matter what.

  Read the article

• Cannot Update Adobe Creative Suit

  - by Lynda

  I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application I originally posted this question on the Adobe Forums and received no help there.

  Read the article

• a VPS mail server

  - by microspino

  Hello I'm trying to substitute citadel on my Virtual Private Server with something more simple. I dislike their documentation and the webmail client. I don't need any groupware feature. I need only an MTA with a nice looking web interface, SPAM and VIRUS check. I recently found the lamson project from Zed Shaw. Is that production ready? Do you had any real and good experience with It? On the latest-news page I see that the last release dates december 2009. Sorry for my lack of knowledge, I'm really new to mail servers but I have to find a solution to manage sending and receiving mail on my VPS. I would accept also to build my VPS email server using a linux system like exim, postfix or whatever but I have really small needs and they will not grow in at least a year and i will be the only one user. I'm searching for something that I could build and manage easily, as I'm a novice linux sysadmin. Having also some good documentation or at least a robust step by step guide would be a plus.

  Read the article

• How to Re-install an App that Shows up in the Appstore as 'Update' Instead of 'Buy App'

  - by Craig Reville

  So long story short: I dropped the wrong app into 'clean my mac' and I hit 'cancel' but it was too late by that point. I rebooted and appstore said it had an update, when I opened appstore it was showing an update for the app I just uninstalled. I tried clicking 'update' but it gives me an error saying it's unable to install after 'downloading'. When I try to go into 'purchased apps' it shows the app as uninstalled so I click 'install' and I get an error saying it's already installed. I'm running Lion OS X, latest version, updated, mac book pro is only a few months old. I tried searching through the entire system to remove all traces of the app, after rebooting appstore no longer shows the app and no longer shows the update but on the apps page it still says 'Update'. I tried reinstalling the app from desktop OUT of the appstore and again says the app is 'already installed'. So after reading more about lion I found an article that spoke about 'BundleID' being the thing that tells appstore what's installed and needing updating however I can't find the location of where the BundleID would be. Any thoughts? I've tried CCleaner, AppCleaner etc and none of them show the app, mainly because it is uninstalled. Update I've spoken to Apple Support who confirmed that there is a file in the system that connects separately to tell the system if there are updates available however they declined to inform me of any further details. Apple also referred me from technical support to iTunes App Store opposed to Mac App Store support and from there I have been referred to AppleCare who are currently 'investigating' this issue. Hopefully there will be a fix that's simple to implement for people having similar issues, this appears to be a more common issue than I previously thought.

  Read the article

• Cannot properly read files on the local server

  - by Andrew Bestic

  I'm running a RedHat 6.2 Amazon EC2 instance using stock Apache and IUS PHP53u+MySQL (+mbstring, +mysqli, +mcrypt), and phpMyAdmin from git. All configuration is near-vanilla, assuming the described installation procedure. I've been trying to import SQL files into the database using phpMyAdmin to read them from a directory on my server. phpMyAdmin lists the files fine in the drop down, but returns a "File could not be read" error when actually trying to import. Furthermore, when trying to execute file_get_contents(); on the file, it also returns a "failed to open stream: Permission denied" error. In fact, when my brother was attempting to import the SQL files using MySQL "SOURCE" as an authenticated MySQL user with ALL PRIVILEGES, he was getting an error reading the file. It seems that we are unable to read/import these files with ANY method other than root under SSH (although I can't say I've tried every possible method). I have never had this issue under regular CentOS (5, 6, 6.2) installations with the same LAMP stack configuration. Some things I've tried after searching Google and StackExchange: CHMOD 0777 both directory and files, CHOWN root, apache (only two users I can think of that PHP would use), Importing SQL files with total size under both upload_max_filesize and post_max_size, PHP open_basedir commented out, or = "/var/www" (my sites are using Apache VirtualHosts within that directory, and all the SQL files are deep within that directory), PHP safe mode is OFF (it was never ON) At the moment I have solved this issue with the smaller files by using the FILE UPLOAD method directly to phpMyAdmin, but this will not be suitable for uploading my 200+ MiB SQL files as I don't have a stable Internet connection. Any light you could shed on this situation would be greatly appreciated. I'm fair with Linux, and for the things that do stump me, Google usually has an answer. Not this time, though!

  Read the article

• Why can't I update Adobe Creative Suite?

  - by Lynda

  I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application This issue was not present in Windows 7 before I upgraded to Windows 8 I originally posted this question on the Adobe Forums and received no help there.

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• Samba4/Ubuntu Shares Incorrectly Available to All Users

  - by Dan

  I've got my Ubuntu server working with Samba4 and got it set up as the Primary domain controller on my network with AD and all that goodness. However, I'm trying to get my Samba configuration to work with the users and groups I've defined with the Active Directory tools from Windows. For instance, I've got a share X which I want users A and B (as part of the 'management' group, known as LLGrpManager in my setup) to see, but no body else. However, after making changes to the configuration, restarting Samba, I test by connecting to the share with my Mac over Samba as user 'C' which isn't part of the management group, and I can, incorrectly, see the X share. I've tried alsorts of combinations of specifying the group with no luck at all. I've got a feeling that my global config might be too lenient or something to do with file permissions but being a bit green, I'm without clue. My /etc/samba/smb.conf # Global parameters [global] server role = domain controller server string = Office Server workgroup = LLDOMAIN realm = lldomain.local netbios name = DUMBO passdb backend = samba4 logon path = \\%L\profiles\%U logon drive = L: log file = /var/log/samba/%m.log max log size = 50 security = ads domain logons = yes domain master = auto usershare allow guests = no valid users = %S [netlogon] path = /var/lib/samba/sysvol/lldomain.local/scripts read only = no guest ok = no [sysvol] path = /var/lib/samba/sysvol read only = No guest ok = no valid users = @LLDOMAIN\LLGrpManager [ShareX] path = /data comment = Entire Data Volume guest ok = no comment = Entire Data Volume guest ok = no valid users = @LLDOMAIN\LLGrpManager admin users = @LLDOMAIN\LLGrpManager browsable = no inherit acls = yes inherit permissions = yes ... My /etc/nsswitch.conf I've also instructed the system to use the nss winbind library when searching for users or groups by adding the stanza passwd and group in /etc/nsswitch.conf: passwd: compat winbind group: compat winbind shadow: compat Permissions on the folder in question drwxrwxrwt 8 root root 4.0K Oct 28 19:11 data

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >