Search Results

Search found 6055 results on 243 pages for 'ryan max'.

Page 157/243 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• can ping, but not SSH

  - by Matt

  So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

  Read the article

• OBIEE 11.1.1 - How to enable HTTP compression and caching in Oracle iPlanet Web Server

  - by Ahmed Awan

  1. To implement HTTP compression / caching, install and configure Oracle iPlanet Web Server 7.0.x for the bi_serverN Managed Servers (refer to document http://docs.oracle.com/cd/E23943_01/web.1111/e16435/iplanet.htm) 2. On the Oracle iPlanet Web Server machine, open the file Administrator's Configuration (obj.conf) for editing. (Guidelines for modifying the obj.conf file is available at http://download.oracle.com/docs/cd/E19146-01/821-1827/821-1827.pdf) 3. Add the following lines in obj.conf file inside <Object name="default"> . </Object> and restart the Oracle iPlanet Web Server machine: #HTTP Caching <If $path =~ '^(.*)\.(jpg|jpeg|gif|png|css|js)$'> ObjectType fn="set-variable" insert-srvhdrs="Expires:$(httpdate($time + 864000))" </If>   <If $path =~ '^(.*)\.(jpg|jpeg|gif|png|css|js)$'> PathCheck fn="set-cache-control" control="public,max-age=864000" </If>   #HTTP Compression   Output fn="insert-filter" filter="http-compression" vary="false" compression-level="9" fragment_size="8096"

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• How to diagnose network speed drops

  - by Luis Alvarado

  Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

  Read the article

• CodePlex Daily Summary for Sunday, June 16, 2013

  CodePlex Daily Summary for Sunday, June 16, 2013Popular ReleasesEmployee Info Starter Kit: v6.0 - ASP.NET MVC Edition: Release Home - Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture EISK v6.0 – ASP.NET MVC edition bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End SpecificationsCreating a new employee record Read existing employee records Update an existing employee reco...OLAP PivotTable Extensions: Release 0.8.1: Use the 32-bit download for... Excel 2007 Excel 2010 32-bit (even Excel 2010 32-bit on a 64-bit operating system) Excel 2013 32-bit (even Excel 2013 32-bit on a 64-bit operating system) Use the 64-bit download for... Excel 2010 64-bit Excel 2013 64-bit Just download and run the EXE. There is no need to uninstall the previous release. If you have problems getting the add-in to work, see the Troubleshooting Installation wiki page. The new features in this release are: View #VALUE! Err...VidCoder: 1.4.22: New in 1.4.22 Added Xbox 360 preset, thanks to Relhak. Added Spanish translation, thanks to fantasmanegro. Added Basque translation, thanks to azpidatziak. Fixed behavior of custom anamorphic auto display width and max width/height. Fixed double-logging on local encodes. Fixed remote encoder not using libdvdnav even when enabled, which had caused some problems with multi-angle DVDs. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30...WPF Application Framework (WAF): WPF Application Framework (WAF) 3.0.0.440: Version: 3.0.0.440 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Please build the whole solution before you start one of the sample applications. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 2012) Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Samples: Use ValueConverters via StaticResource instead of x:Static. Other Downloads Downloads OverviewSFDL.NET: SFDL.NET v1.1.0.5: Changelog: Implemeted SFDL Container v4 (AES Encryption, Set Character Set) Added Stopwatch (download time) Many Bugfixes and ImprovementsBlackJumboDog: Ver5.9.1: 2013.06.13 Ver5.9.1 (1) Web??????SSI?#include???、CGI?????????????????????? (2) ???????????????????????????Lakana - WPF Framework: Lakana V2.1 RTM: - Dynamic text localization - A new application wide message busFree language translator and file converter: Free Language Translator 3.3: some bug fixes and a new link to video tutorials on Youtube.Pokemon Battle Online: ETV: ETV???2012?12??????，????，???????$/PBO/branches/PrivateBeta??。 ???????bug???????。 ???? Server??????，?????。 ?????????，?????????????，?????????。 ????????，????，?????????，???????????（??）??。 ???? ????????????。 ???????。 ???PP????，????????????????????PP????，??3。 ?????????????，??????????。 ???????? ??? ?? ???? ??? ???? ?? ?????????? ?? ??? ??? ??? ???????? ???? ???? ???????????????、???????????，??“???????”??。 ???bug ???Modern UI for WPF: Modern UI 1.0.4: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extension includes the ModernUI.WPF NuGet package. DownloadToolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.11): XrmToolbox improvement Add exception handling when loading plugins Updated information panel for displaying two lines of text Tools improvementMetadata Document Generator (v1.2013.6.10)New tool Web Resources Manager (v1.2013.6.11)Retrieve list of unused web resources Retrieve web resources from a solution All tools listAccess Checker (v1.2013.2.5) Attribute Bulk Updater (v1.2013.1.17) FetchXml Tester (v1.2013.3.4) Iconator (v1.2013.1.17) Metadata Document Generator (v1.2013.6.10) Privilege...Document.Editor: 2013.23: What's new for Document.Editor 2013.23: New Insert Emoticon support Improved Format support Minor Bug Fix's, improvements and speed upsChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.4 for VS2012: V2.4 - Release Date 6/10/2013 Items addressed in this 2.4 release Updated MSBuild Community Tasks reference to 1.4.0.61 Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesLayered Architecture Sample for .NET: Leave Sample - June 2013 (for .NET 4.5): Thank You for downloading Layered Architecture Sample. Please read the accompanying README.txt file for setup and installation instructions. This is the first set of a series of revised samples that will be released to illustrate the layered architecture design pattern. This version is only supported on Visual Studio 2012. This set contains 2 samples that illustrates the use of: ASP.NET Web Forms, ASP.NET Model Binding, Windows Communications Foundation (WCF), Windows Workflow Foundation (W...Papercut: Papercut 2013-6-10: Feature: Shows From, To, Date and Subject of Email. Feature: Async UI and loading spinner. Enhancement: Improved speed when loading large attachments. Enhancement: Decoupled SMTP server into secondary assembly. Enhancement: Upgraded to .NET v4. Fix: Messages lost when received very fast. Fix: Email encoding issues on display/Automatically detect message Encoding Installation Note:Installation is copy and paste. Incoming messages are written to the start-up directory of Papercut. If you do n...Supporting Guidance and Whitepapers: v1.BETA Unit test Generator Documentation: Welcome to the Unit Test Generator Once you’ve moved to Visual Studio 2012, what’s a dev to do without the Create Unit Tests feature? Based on the high demand on User Voice for this feature to be restored, the Visual Studio ALM Rangers have introduced the Unit Test Generator Visual Studio Extension. The extension adds the “create unit test” feature back, with a focus on automating project creation, adding references and generating stubs, extensibility, and targeting of multiple test framewor...MapWindow 4: MapWindow GIS v4.8.8 - Release Candidate - 32Bit: Download the release notes here: http://svn.mapwindow.org/svnroot/MapWindow4Dev/Bin/MapWindowNotes.rtfLINQ to Twitter: LINQ to Twitter v2.1.06: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.VR Player: VR Player 0.3.1 ALPHA: New plugin system with individual folders TrackIR support Maya and 3ds max formats support Dual screen support Mono layouts (left and right) Cylinder height parameter Barel effect factor parameter Razer hydra filter parameter VRPN bug fixes UI improvements Performances improvements Stabilization and logging with Log4Net New default values base on users feedback CTRL key to open menuSimCityPak: SimCityPak 0.1.0.8: SimCityPak 0.1.0.8 New features: Import BMP color palettes for vehicles Import RASTER file (uncompressed 8.8.8.8 DDS files) View different channels of RASTER files or preview of all layers combined Find text in javascripts TGA viewer Ground textures added to lot editor Many additional identified instances and propertiesNew ProjectsADJD-S311-CR99 Colour Sensor Arduino: Integrating the Avago ADJD-s311-CR999 with ArduinoBerkeley Algorithm: student project for DS course Berkeley Algorithm C#Code Kata - HarryPotter Win8: HarryPotter Series discount programming excerciseHad CMS: Had CMSjean0615mercurialmm: ddjet.version.Incrementor: It's a console tool parse AssemblyInfo.cs files in given directory and set AssemblyVersion and AssemblyFileVersion attribtes to given version. It can be easilyLogger - logging for your .NET project using file, mail, debug output: A light weight yet competent logger for .NET with configurable output modules, such as log file, e-mail and debug log. Easy to add your own output module if needed.MatUtils: Um projecto onde se incluem algumas ferramentas matemáticas.MoGo Mobile: The first makings of an open source Mobile Game!myFirstHTML5: Project was to create a mobile responsive websiteNeTools: This Tool Allows You To Know & Monitor Your Network Better. You'l Be Able To Hijack The Network's Traffic, Poison The Network, Kick Devices From It & Many More.Prism Photo Browser: This is a functioning photo browser written in C# for a WPF platform implementing the Model View View-Model (MVVM) design pattern and PrismQuesTime: This is a quiz projectSM130 Arduino Integration: A project to integrate an SM130 RFID module with Arduino.SQL Server Analysis Services Cube Status Web Part for SharePoint: The Cube Status project provides a SharePoint Web Part that connects to a SQL Server Analysis Services instance and shows the status of a specific cubeSQLite Sync for Windows Phone 8: Project Description This project is the Windows Phone 8 implementation of the Sync Framework Toolkit to enable synchronization with Windows Phone 8 and SQLite.Test Project: testTool To Recover or Restore Windows 7 Files: Impossible Is Nothing!: Get easy to use Windows 2007 Recovery software which is fully helpful application that can easily recover or restore Windows 2007 files with full of quality.Vitus Localization: An Orchard module containing a collection of features useful for localized or multilingual Orchard websites.Wedn.Net: Blog ????: ????? ??? ?????? ????? ???? ??? ????? ???? ??? ?? ??? ???????

  Read the article

• How to get Autocad working with Wine?

  - by gabriel

  I am trying 3 years now installing Autocad,*3ds Max* and Revit architecture on Ubuntu with wine! Every year I am very optimistic 'cause I see the new wine versions already improved. So, now I am starting again in a clean Ubuntu installation to install Autocad 2013 with wine 1.4. I am not trying to have an answer only for me, but I want this community to try and finally we can achieve that! The winetricks have already net framework 4 to install which is the reason I have not already ran to the past Autocad. So, I would like to remove completely my windows 7 partition from my pc and go on a linux machine without loosing the powerfull architectural programms.I know all about Blender and staff so I just want you to help find a solution on that, because I know there is a solution! Maybe I will have to learn all the c++ or python etc. But I am sure that a solution can come with the help of all of us! Any suggestion about this problem will be very nice and helpfull.

  Read the article

• Calculating collision force with AfterCollision/NormalImpulse is unreliable when IgnoreCCD = false?

  - by Michael

  I'm using Farseer Physics Engine 3.3.1 in a very simple XNA 4 test game. (Note: I'm also tagging this Box2D, because Farseer is a direct port of Box2D and I will happily accept Box2D answers that solve this problem.) In this game, I'm creating two bodies. The first body is created using BodyFactory.CreateCircle and BodyType.Dynamic. This body can be moved around using the keyboard (which sets Body.LinearVelocity). The second body is created using BodyFactory.CreateRectangle and BodyType.Static. This body is static and never moves. Then I'm using this code to calculate the force of collision when the two bodies collide: staticBody.FixtureList[0].AfterCollision += new AfterCollisionEventHandler(AfterCollision); protected void AfterCollision(Fixture fixtureA, Fixture fixtureB, Contact contact) { float maxImpulse = 0f; for (int i = 0; i < contact.Manifold.PointCount; i++) maxImpulse = Math.Max(maxImpulse, contact.Manifold.Points[i].NormalImpulse); // maxImpulse should contain the force of the collision } This code works great if both of these bodies are set to IgnoreCCD=true. I can calculate the force of collision between them 100% reliably. Perfect. But here's the problem: If I set the bodies to IgnoreCCD=false, that code becomes wildly unpredictable. AfterCollision is called reliably, but for some reason the NormalImpulse is 0 about 75% of the time, so only about one in four collisions is registered. Worse still, the NormalImpulse seems to be zero for completely random reasons. The dynamic body can collide with the static body 10 times in a row in virtually exactly the same way, and only 2 or 3 of the hits will register with a NormalImpulse greater than zero. Setting IgnoreCCD=true on both bodies instantly solves the problem, but then I lose continuous physics detection. Why is this happening and how can I fix it? Here's a link to a simple XNA 4 solution that demonstrates this problem in action: http://www.mediafire.com/?a1w242q9sna54j4

  Read the article

• Is it possible to render and style a <title> element from within the <head> of an html document?

  - by Brian Z

  Is it possible to render and style a <title> element from within the <head> of an html document? I thought it was impossible to render information from the <head>, but the system status page for 37signals.com seems to be doing just that - http://status.37signals.com/. If you inspect the element at the very top of the page, the text that reads "37signals System Status", you'll see that the part of the DOM that is generating the text is the <head>'s <title>, and the css is as follows: title { display: block; margin: 10px auto; max-width: 840px; width: 100%; padding: 0 20px; float: left; color: black; text-rendering: optimizelegibility; -moz-box-sizing: border-box; box-sizing: border-box; } Can someone confirm that the <title> info from the <head> is indeed what is being rendered? If so, can someone point to documentation that defines this capability as I have not found any? I have applied the above css to an html document on my local web server using the same browser (chromium, os x 10.8.5) as the 37signals site was viewed on, yet my file did not display the <head>'s <title>.

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• Samba issue with sharing directories on NTFS/FAT32

  - by Microkernel

  I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two Windows XP machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VirtualBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is the following. Shared folders on ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (Even if I provide admin login details). I changed workgroup value to the domain_name in office laptop, but still the problem persists. Here is the smdb.conf I am using: [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail.

  Read the article

• Can I become a Game Designer? [on hold]

  - by user32721

  This is my first time posting something on a forum in 4 years. I am posting this because I want to adjust my expectations and goals regarding game design. I am in college in Morocco (Al Akhawayn university). just started my junior year. I am a communications major (school of humanities) and a gender studies minor. I want to become a video game designer. It is the only career that I am interested in. I have been playing ever since I was 5 and haven't stopped yet. Currently I don't have any noteworthy skills to become a designer. I don't know how to program (don't really have the patience for it) and I can't draw to save my life. I haven't tried visual software like MAYA or MAX so I can't comment on graphic design. So I basically want to know whether my current education is capable of helping me reach my goal. If not then should I take a master's in game design (in the U.S?) or switch my minor to computer science? I am sorry that this post is long! I look forward to hearing your advice!

  Read the article

• Searching integer sequences

  - by David Gibson

  I have a fairly complex search problem that I've managed to reduce to the following description. I've been googling but haven't been able to find an algorithm that seems to fit my problem cleanly. In particular the need to skip arbitrary integers. Maybe someone here can point me to something? Take a sequence of integers A, for example (1 2 3 4) Take various sequences of integers and test if any of them match A such that. A contains all of the integers in the tested sequence The ordering of the integers in the tested sequence are the same in A We don't care about any integers in A that are not in the test sequence We want all matching test sequences, not just the first. An example A = (1 2 3 4) B = (1 3) C = (1 3 4) D = (3 1) E = (1 2 5) B matches A C matches A D does not match A as the ordering is different E does not match A as it contains an integer not in A I hope that this explanation is clear enough. The best I've managed to do is to contruct a tree of the test sequences and iterate over A. The need to be able to skip integers leads to a lot of unsuccessful search paths. Thanks Reading some suggestions I feel that I have to clarify a couple of points that I left too vague. Repeated numbers are allowed, in fact this is quite important as it allows a single test sequence to match A is multiple ways A = (1234356), B = (236), matches could be either -23---6 or -2--3-6 I expect there to be a very large number of test sequences, in the thousands at least and sequence A will tend to have a max length of maybe 20. Thus simply trying to match each test sequence one by one by iterating becomes extremely inefficient. Sorry if this wasn't clear.

  Read the article

• Given a database table where multiple rows have the same values and only the most recent record is to be returned

  - by Jim Lahman

  I have a table where there are multiple records with the same value but varying creation dates.  A sample of the database columns is shown here:   1: select lot_num, to_char(creation_dts,'DD-MON-YYYY HH24:MI:SS') as creation_date 2: from coil_setup 3: order by lot_num   LOT_NUM                        CREATION_DATE        ------------------------------ -------------------- 1435718.002                    24-NOV-2010 11:45:54 1440026.002                    17-NOV-2010 06:50:16 1440026.002                    08-NOV-2010 23:28:24 1526564.002                    01-DEC-2010 13:14:04 1526564.002                    08-NOV-2010 22:39:01 1526564.002                    01-NOV-2010 17:04:30 1605920.003                    29-DEC-2010 10:01:24 1945352.003                    14-DEC-2010 01:50:37 1945352.003                    09-DEC-2010 04:44:22 1952718.002                    25-OCT-2010 09:33:19 1953866.002                    20-OCT-2010 18:38:31 1953866.002                    18-OCT-2010 16:15:25   Notice that there are multiple instances of of the same lot number as shown in bold. To only return the most recent instance, issue this SQL statement: 1: select lot_num, to_char(creation_date,'DD-MON-YYYY HH24:MI:SS') as creation_date 2: from 3: ( 4: select rownum r, lot_num, max(creation_dts) as creation_date 5: from coil_setup group by rownum, lot_num 6: order by lot_num 7: ) 8: where r < 100  LOT_NUM                        CREATION_DATE        ------------------------------ -------------------- 2019416.002                    01-JUL-2010 00:01:24 2022336.003                    06-OCT-2010 15:25:01 2067230.002                    01-JUL-2010 00:36:48 2093114.003                    02-JUL-2010 20:10:51 2093982.002                    02-JUL-2010 14:46:11 2093984.002                    02-JUL-2010 14:43:18 2094466.003                    02-JUL-2010 20:04:48 2101074.003                    11-JUL-2010 09:02:16 2103746.002                    02-JUL-2010 15:07:48 2103758.003                    11-JUL-2010 09:02:13 2104636.002                    02-JUL-2010 15:11:25 2106688.003                    02-JUL-2010 13:55:27 2106882.003                    02-JUL-2010 13:48:47 2107258.002                    02-JUL-2010 12:59:48 2109372.003                    02-JUL-2010 20:49:12 2110182.003                    02-JUL-2010 19:59:19 2110184.003                    02-JUL-2010 20:01:03

  Read the article

• can't access SAMBA shares on UBUNTU-server from other computers

  - by larand

  Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

  Read the article

• What is the best way to check if there is overlap between player and static, non-collidable items in bullet physic engine

  - by tigrou

  I'd like to add non collidable objects (eg: power ups, items, ...) in a game world using Bullet Physics Engine and to know if there is collision between player and them. Some info : there is a lot of items ( 1000), all are box shapes and they don't overlap. Here is things i have tried : btDbvt* bvtItems = new btDbvt(); //btDbvt is a hierachical AABB tree, used by Bullet foreach(var item ...) { btDbvtVolume volume = ... //compute item AABB; bvtItems->insert(volume, (void*)someExtraData); } Then, to find collisions between items and player : playerRigidBody->getAabb(min, max); btDbvtVolume playervolume = ... //compute player AABB bvtItems->collideTV(bvtItems->m_root, playervolume, *someCollisionHandler); This works fairly well (and its very fast), however, there is a problem : it only check items AABB against player AABB. That loss of precision is acceptable for items but not for player which is not a box. It would actually need another check to make sure player really collide with item but i don't know how to do this in Bullet. It would have been nice to have a function like this : playerRigidBody->checkCollisionWithAABB(); After doing trying that, I discovered that a btGhostObject exist and seems to have been made for that. I changed my code like this : foreach(var item...) { btCollisionObject* ghostObject = new btGhostObject(); ghostObject->setCollisionShape(boxShape); ghostObject->setCollisionFlags(ghostObject->getCollisionFlags() | btCollisionObject::CF_NO_CONTACT_RESPONSE); startTransform.setOrigin(...); //item position ghostObject->setWorldTransform(startTransform); dynamicsWorld->addCollisionObject(ghostObject, btBroadphaseProxy::SensorTrigger, btBroadphaseProxy:: CharacterFilter); } It also works ok, but there is a huge fps drop (almost ten times slower) which is not acceptable. Maybe there is something missing (forget set a flag) and Bullet is doing extra job for nothing or maybe all that ghostObjects are polluting broad phase and ghostObject is not the right thing for that. Any help would be appreciated.

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

  - by nightfly

  I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

  Read the article

• How to Fix this specific Google "Fetch as Googlebot" error appearing on my Webmaster Tools?

  - by UXdesigner

  Good day, I'm currently finding out why I have lost all of my website's rank in google. I don't even appear in google results by the domain. But other sites do link me and they appear in the google results. I think it's all about leaving my site two months alone and finding out I had 20k in comment spam, which I completely deleted and fixed with filters and adding a new Disqus comment service. Thing is, I added my site to Google Webmaster Tools and I'm finding out several awful things. For example, when I click in Google Fetch As GoogleBot. I receive this error message below in response to my request. And I don't even know what's the real problem and how to fix it. I simply don't get it. This is what appears: Date: Wednesday, July 20, 2011 9:43:35 AM PDT Googlebot Type: Web Download Time (in milliseconds): 55 HTTP/1.1 403 Forbidden Date: Wed, 20 Jul 2011 16:43:36 GMT Server: Apache Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 248 Keep-Alive: timeout=2, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 403 Forbidden Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Do you guys know anything about this problem ? I need to have Google crawl my site again. I used to have a really nice google result in the past three years. Now, there's nothing. thanks,

  Read the article

• JavaFX 2.2????

  - by ksky

  ??: https://blogs.oracle.com/javafx/entry/what_s_new_in_javafx ???Oracle?JavaFX?????????????JavaFX 2.2?????????: 2.2?????Windows (32-bit???64-bit)?Mac OS X (64-bit)?Linux (32-bit???64-bit)?????JavaFX?????????????????????????????????JavaFX???????????????????????????????????JavaFX????????????????????????? JavaFX 2.2???????Oracle?Java SE 7u6????????????????2011?12??????2?????????????????????????1???????????????????JDK?JRE????Java SE?????????JavaFX????????????????????????????????????????????????????JavaFX???????????????????????Java SE??????????????????????? Java SE 6???????JavaFX 2?????????????????????????Windows????????????????????????Java SE 6?End of Life (EOL)???2013?2???????????????????????????EOL??????Java SE????????????????Java SE 6??????????????????????????????????????????Java SE 7?????????????? ?????????????JavaFX 2.2??????????????????: JavaFX?????????????????????????????????????????????????????????????????????????????????Java???JavaFX????????????????????????????????????????????OS???????????????????????/?????????????????????????Java SE?????????????????????Java SE 7???????JavaFX 2.2????????????????????? ???????????????????????????????????????????????????????????????????????ARM?????????Java SE Embedded?????????????????????????UI????????????????????????????????????????????????????????????????????????????????????????????????Java?????????????????????????????????? JavaFX Canvas API??HTML5?Canvas?????????2D??????????HTML5???????????????JavaFX Canvas API?????????????????HTML5?Canvas API??????????????????????API??AWT?SVG????????????????????????Ensemble?????????????"NEW!"????????"Fireworks"???Canvas?????????????????????????????Canvas????????????????????? JavaFX 2.2???JavaFX???????????????????????????????????????Ensemble?"NEW!"????????"Image Operator"????????????? ColorPicker?Pagination???2?????UI???????????????????Ensemble?"NEW!"???????????????????WebView???????????????????????????????FXML??????????????????????????????? HTTP????????????????JavaFX????????????????????????????????????????????????????????????????????/??????????????????????????????? Swing?????????JavaFX??????Swing?????SWT?????????JavaFX??????????SWT?????????????????????????JavaFX????????????????????????????????? ???????????JavaFX???????????????UI??????????????????????????UI?????????FXML??????????JavaFX Scene Builder 1.0?????????????????Scene Builder?JavaFX???????????????????????????????????Windows??Max OS X??????????NetBeans 7.2???????????????(????Java IDE?????????????)? ??????JavaFX 2.2????Linux?????????????????????????????JavaFX?Java SE?????????????Oracle?????????????????????????????????????????????????????????

  Read the article

• How to visually "connect" skybox edges with terrain model

  - by David

  I'm working on a simple airplane game where I use skybox cube rendered using disabled depth test. Very close to the bottom side of the skybox is my terrain model. What bothers me is that the terrain is not connected to the skybox bottom. This is not visible while the plane flies low, but as it gets some altitude, the terrain looks smaller because of the perspective. Since the skybox center is always same as the camera position, the skybox moves with the plane, but the terrain goes into the distance. Ok, I think you understand the problem. My question is how to fix it. It's an airplane game so limiting max altitude is not possible. I thought about some way to stretch terrain to always cover whole bottom side of the skybox cube, but that doesn't feel right and I don't even know how would I calculate new terrain dimensions every frame. Here are some screenshot of games where you can clearly see the problem: (oops, I cannot post images yet) darker brown is the skybox bottom here: http://i.stack.imgur.com/iMsAf.png untextured brown is the skybox bottom here: http://i.stack.imgur.com/9oZr7.png

  Read the article

• computer shows up twice, connection unknown

  - by Thomas G. Seroogy

  added two computers to Ubuntu One. One machine is windows. The windows version seems to work fine, and I started syncing a folder by placing it into the Ubuntu One folder. All files and folders are visible when I go to my account online. On Ubuntu machine. I selected to sync the Download folder. Shortly thereafter, I realized that one folder exceeded my storage max. I tried to un-sync the folder, but Ubuntu One and the Stop Syncing This Folder were not visible in the menu. Per Ubuntu instructions, I removed my Ubuntu computer from the list of syncing computers. Per Ubuntu instructions, I re-added the Ubuntu computer. However, I find that two computers by the same name are added on both the desktop app and on the web. Plus, I the connection is "unknown." I have removed and re-added the computer several times with the same results. In all cases, I remove the computers using the Ubuntu One desktop app, then removing them from my account on the web, removing the Ubuntu One password, and restart the Ubuntu One app. Problem remains. Thanks in advance for any replies and help.

  Read the article

• Making a game with responsive resolution

  - by alexandervrs

  I am making a game, however I wish for it to be resolution agnostic. My target resolution i.e. where things look as intended is 1600 x 900. My ideas are: Make the HUD stay fixed to the sides no matter what resolution, use different size for HUD graphics under a certain resolution and another under a certain large one. Use large HD sprites/backgrounds which are a power of 2, so they scale nicely. Use the player's native resolution. Scale the game area (not the HUD) to fit (resulting zooming in some and cropping the game area sides if necessary for widescreen, no stretch), but always fill the screen. Have a min and max resolution limit for small and very large displays where you will just change the resolution(?) or scale up/down to fit. What I am a bit confused though is what math formula I would use to scale the game area correctly based on the resolution no matter the aspect ratio, fully fit in a square screen and with some clip to the sides for widescreen. Pseudocode would help as well. :)

  Read the article

• AMD FX CPU drivers/patch

  - by Mubeen Shahid

  I am using Ubuntu since 2009 on notebooks with Intel CPUs. However now, that I am using AMD's FX 6300, I am interested in knowing if there exists anything from Ubuntu (specifically any kernel enhancements/drivers/patches) for AMD's FX "family 15h" Piledrivers. Reason: I would like to have a kernel which uses the hardware to its full capacity, be able to use the latest instruction sets, for max. performance. I did some tests, started with compiling stable 3.9.7 on my 12.04 LTS box, and during compilation I choose processor vendor AMD (unchecked Intel/VIA/etc.), and when I started Ubuntu with this compiled kernel, in the section "System Settings - Additional Drivers" I found that, in addition to graphic card's drivers, there were AMD family 15h drivers also. However, I would prefer something in this regard tested/signed by Ubuntu developers. P.S: 1- the kernel that I have compiled has some issues with Nvidia graphics drivers, so I deleted kernel 3.9.7 and installed signed 3.8.xx from Ubuntu repositories. 2- incase if somebody is planning to advise me to install "AMD64", I am not talking about AMD64 (which is in fact for 64-bit platform).

  Read the article

• Differences when Running with OutputCache managed module under ASP.NET IIS7.x with Cache-control header

  - by Shawn Cicoria

  This post is to report some differences when using MVC or IHttpHandlers if you’re attempting to set the Cache-control : max-age or s-maxage value under IIS7.x using the HttpResponse.Cache methods. [UPDATE]: 2011-3-14 – The missing piece was calling  Response.Cache.SetSlidingExpiration(true) as follows: context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; context.Response.Cache.SetSlidingExpiration(true);   Under IIS7.x if you us one of the following 2 methods, you will only get a Cache-ability of “public”.  public ActionResult Image2() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("Respone.Cache.Setxx calls", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); return new FileStreamResult(oStream, "image/jpeg"); } } Method 2 – which is just a plain old HttpHandler and really isn’t MVC3, but under the same MVC ASP.NET application, same result. public class image : IHttpHandler { public void ProcessRequest(HttpContext context) { using (var image = ImageUtil.RenderImage("called from IHttpHandler direct", 5, DateTime.Now)) { context.Response.Cache.SetCacheability(HttpCacheability.Public); context.Response.Cache.SetMaxAge(TimeSpan.FromMinutes(5)); context.Response.ContentType = "image/jpeg"; image.Save(context.Response.OutputStream, ImageFormat.Jpeg); } } } Using the following under MVC3 (I haven’t tried under earlier versions) will work by applying the OutputCacheAttribute to your Action: [OutputCache(Location = OutputCacheLocation.Any, Duration = 300)] public ActionResult Image1() { MemoryStream oStream = new MemoryStream(); using (Bitmap obmp = ImageUtil.RenderImage("called with OutputCacheAttribute", 5, DateTime.Now)) { obmp.Save(oStream, ImageFormat.Jpeg); oStream.Position = 0; return new FileStreamResult(oStream, "image/jpeg"); } } To remove the “OutputCache” module, you use the following in your web.config: <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules runAllManagedModulesForAllRequests="true"> <!--<remove name="OutputCache"/>--> </modules>

  Read the article

• Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

  - by Deon Pretorius

  I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >