Search Results

Search found 5195 results on 208 pages for 'shift reduce conflict'.

Page 157/208 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

  • No "New Folder" button in windows 7

    - by user1125620
    My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

    Read the article

  • SharePoint 2010 - Client Object Model - Add attachment to ListItem

    - by Thorben
    Hi, I have a SharePoint List to which I'm adding new ListItems using the Client Object Model. Adding ListItems is not a problem and works great. Now I want to add attachments. I'm using the SaveBinaryDirect in the following manner: File.SaveBinaryDirect(clientCtx, url.AbsolutePath + "/Attachments/31/" + fileName, inputStream, true); It works without any problem as long as the item that I'm trying to add the attachment to, already has an attachment that was added through the SharePoint site and not using the Client Object Model. When I try to add an attachment to a item that doesnt have any attachments yet, I get the following errors (both happen but not with the same files - but those two messages appear consistently): The remote server returned an error: (409) Conflict The remote server returned an error: (404) Not Found I figured that maybe I need to create the attachment folder first for this item. When I try the following code: clientCtx.Load(ticketList.RootFolder.Folders); clientCtx.ExecuteQuery(); clientCtx.Load(ticketList.RootFolder.Folders[1]); // 1 -> Attachment folder clientCtx.Load(ticketList.RootFolder.Folders[1].Folders); clientCtx.ExecuteQuery(); Folder folder = ticketList.RootFolder.Folders[1].Folders.Add("33"); clientCtx.ExecuteQuery(); I receive an error message saying: Cannot create folder "Lists/Ticket System/Attachment/33" I have full administrator rights for the SharePoint site/list. Any ideas what I could be doing wrong? Thanks, Thorben

    Read the article

  • InvalidOperationException when calling SaveChanges in .NET Entity framework

    - by Pär Björklund
    Hi, I'm trying to learn how to use the Entity framework but I've hit an issue I can't solve. What I'm doing is that I'm walking through a list of Movies that I have and inserts each one into a simple database. This is the code I'm using private void AddMovies(DirectoryInfo dir) { MovieEntities db = new MovieEntities(); foreach (DirectoryInfo d in dir.GetDirectories()) { Movie m = new Movie { Name = d.Name, Path = dir.FullName }; db.AddToMovies(movie); } db.SaveChanges(); } When I do this I get an exception at db.SaveChanges() that read. The changes to the database were committed successfully, but an error occurred while updating the object context. The ObjectContext might be in an inconsistent state. Inner exception message: AcceptChanges cannot continue because the object's key values conflict with another object in the ObjectStateManager. Make sure that the key values are unique before calling AcceptChanges. I haven't been able to find out what's causing this issue. My database table contains three columns Id int autoincrement Name nchar(255) Path nchar(255) Update: I Checked my edmx file and the SSDL section have the StoreGeneratedPattern="Identity" as suggested. I also followed the blog post and tried to add ClientAutoGenerated="true" and StoreGenerated="true" in the CSDL as suggested there. This resulted in compile errors ( Error 5: The 'ClientAutoGenerated' attribute is not allowed.). Since the blog post is from 2006 and it has a link to a follow up post I assume it's been changed. However, I cannot read the followup post since it seems to require an msdn account.

    Read the article

  • Working with Subversion the same as with Visual Source Safe in Visual Studio

    - by Para
    Hi, At work I just started using subversion with ankhsvn instead of visual source safe. I managed to integrate it well enough but it doesn't seem the same. Using VSS the following would happen: A user check out a file by right clicking and selecting "check out" or by editing it. If another user tried to modify the same file he would get an error. No 2 users could edit the same file at the same time. No fancy merging. No conflicts and no conflict resolutions. I understand the the philosophy behind subversion is different but is there any way that this behavior described above could be duplicated with subversion? There is an option in ankhSVN called "Automatically lock files on change..." but even if I activate this option when I edit a file it never gets automatically locked. Even if this option worked the other users wouldn't see the lock until they comited the file. They wouldn't get an error when they tried to edit it like they would in Visual Source Safe. So basically: can Visual Source Safe's behavior be duplicated using Subversion and ankhSVN?

    Read the article

  • Test run errors with MSTest in VS2010

    - by Tomas Lycken
    When I run my Unit Tests, all tests pass, but instead of "Test run succeeded" or whatever the success message is, I get "Test run error" in the little bar that tells me how many of my tests pass, even though all my tests passed. When i click the text, I'm taken to a page that tells me the following two things happened: Warning: conflict during test run deployment: deployment item '[...]\Booking.Web.dll' directly or indirectly referenced by the test container [...]\Booking.Web.Tests.dll cannot be deployed to 'Booking.Web.dll' because otherwise the file '[...]\Booking.Web.dll' would override deployment item '[...]\Booking.Web.dll' directly or indirectly referenced by '[...]\Booking.Web.Tests.dll' Error: Cannot initialize the ASP.NET project 'Booking.Web' Exception was thrown: The website could not be configured correctly; getting ASP.NET proccess information failed. Requesting 'http://localhost:54131/VSEnterpriseHelper.axd' returned an error: The remote server returned an error: (500) Internal Server Error. I don't understand half of what it's complaining about. How do I get rid of these errors? (And for reference: Booking.Web is an ASP.NET MVC 2 project, Booking.Web.Tests is a Test project, [...] is the full local path to the projects in my environment, in most of the cases above to the /bin/debug/ folder inside the Booking.Web project)

    Read the article

  • Autonumber with Entity Framework

    - by dcompiled
    I want to loop through a collection of objects and add them all to a table. The destination table has an auto-increment field. If I add a single object there is no problem. If I add two objects both with the primary key of zero, the entity framework fails. I can manually specify primary keys but the whole point of trying the EF was to make life easier not more complicated. Here is the code and the exception received follows. foreach (Contact contact in contacts) { Instructor instructor = InstructorFromContact(contact); context.AddToInstructors(instructor); } try { context.SaveChanges(); } catch (Exception ex) { Console.WriteLine(ex.ToString()); } System.InvalidOperationException: The changes to the database were committed successfully, but an error occurred while updating the object context. The ObjectContext might be in an inconsistent state. Inner exception message: AcceptChanges cannot continue because the object's key values conflict with another object in the ObjectStateManager. Make sure that the key values are unique before calling AcceptChanges. at System.Data.Objects.ObjectContext.SaveChanges(SaveOptions options) at System.Data.Objects.ObjectContext.SaveChanges() at DataMigration.Program.CopyInstructors() in C:\Projects\DataMigration\Program.cs:line 52

    Read the article

  • Linq to SQL and concurrency with Rob Conery repository pattern

    - by David Hall
    I have implemented a DAL using Rob Conery's spin on the repository pattern (from the MVC Storefront project) where I map database objects to domain objects using Linq and use Linq to SQL to actually get the data. This is all working wonderfully giving me the full control over the shape of my domain objects that I want, but I have hit a problem with concurrency that I thought I'd ask about here. I have concurrency working but the solution feels like it might be wrong (just one of those gitchy feelings). The basic pattern is: private MyDataContext _datacontext private Table _tasks; public Repository(MyDataContext datacontext) { _dataContext = datacontext; } public void GetTasks() { _tasks = from t in _dataContext.Tasks; return from t in _tasks select new Domain.Task { Name = t.Name, Id = t.TaskId, Description = t.Description }; } public void SaveTask(Domain.Task task) { Task dbTask = null; // Logic for new tasks omitted... dbTask = (from t in _tasks where t.TaskId == task.Id select t).SingleOrDefault(); dbTask.Description = task.Description, dbTask.Name = task.Name, _dataContext.SubmitChanges(); } So with that implementation I've lost concurrency tracking because of the mapping to the domain task. I get it back by storing the private Table which is my datacontext list of tasks at the time of getting the original task. I then update the tasks from this stored Table and save what I've updated This is working - I get change conflict exceptions raised when there are concurrency violations, just as I want. However, it just screams to me that I've missed a trick. Is there a better way of doing this? I've looked at the .Attach method on the datacontext but that appears to require storing the original version in a similar way to what I'm already doing. I also know that I could avoid all this by doing away with the domain objects and letting the Linq to SQL generated objects all the way up my stack - but I dislike that just as much as I dislike the way I'm handling concurrency.

    Read the article

  • E2251 Ambiguous overloaded call to ....

    - by Eric M
    I inherited some Delphi components/code that currently compiles with C++ Builder 2007. I'm simply now trying to compile the components with C++ Builder RAD XE. I don't know Delphi (object pascal). Here are the versions of the 'Supports' functions that appear to be in conflict. Is there a compiler switch I can use to make RAD XE backward compatible? Or is there something I can do to these function calls to correct the ambiguous nature? {$IFNDEF DELPHI5} procedure FreeAndNil(var Obj); var Temp: TObject; begin Temp := TObject(Obj); Pointer(Obj) := nil; Temp.Free; end; function Supports(const Instance: IUnknown; const Intf: TGUID; out Inst): Boolean; overload; begin Result := (Instance <> nil) and (Instance.QueryInterface(Intf, Inst) = 0); end; function Supports(Instance: TObject; const Intf: TGUID; out Inst): Boolean; overload; var Unk: IUnknown; begin Result := (Instance <> nil) and Instance.GetInterface(IUnknown, Unk) and Supports(Unk, Intf, Inst); end; {$ENDIF} {$IFNDEF DELPHI6} function Supports(const Instance: TObject; const IID: TGUID): Boolean; var Temp: IUnknown; begin Result := Supports(Instance, IID, Temp); end; {$ENDIF}

    Read the article

  • Could not convert JavaScript argument arg 0" nsresult: "0x80570009 (NS_ERROR_XPC_BAD_CONVERT_JS

    - by Drahcir
    I am trying to make this captcha jquery plugin to work. The a certain line of code is executed, the error pops up. This is the line of code that causes the error : $(".ajax-fc-" + rand).draggable({ containment: '#ajax-fc-content' }); What I am assuming is that there is some kind of conflict with the javascript reference, but can't determain what. These are the referenes that I am using <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.min.js"></script> <script src="js/ui.core.js"></script> <script src="js/ui.draggable.js"></script> <script src="js/ui.droppable.js"></script> <script src="js/effects.core.js"></script> <script src="js/effects.slide.js"></script>

    Read the article

  • jQuery .each() with multiple selectors - skip, then .empty() elements

    - by joe
    I'd like to remove all matching elements, but skip the first instance of each match: // Works as expected: removes all but first instance of .a jQuery ('.a', '#scope') .each ( function (i) { if (i > 0) jQuery (this).empty(); }); // Expected: removal of all but first instance of .a and .b // Result: removal of *all* instances of both .a and .b jQuery ('.a, .b', '#scope') .each ( function (i) { if (i > 1) jQuery (this).empty(); }); <div id="scope"> <!-- Want to keep the first instance of .a and .b --> <div class="a">[bla]</span> <div class="b">[bla]</span> <!-- Want to remove all the others --> <div class="a">[bla]</span> <div class="b">[bla]</span <div class="a">[bla]</span> <div class="b">[bla]</span ... </div> Any suggestions? Using jQuery() rather than $() because of conflict with 'legacy' code Using .empty() because .a contains JS I'd like to disable Stuck with jQuery 1.2.3 Thanks you!

    Read the article

  • Entity Framework, Foreign Keys and EntityKeys

    - by Greg
    I've got a problem with the Entity Framework and the ForeignKeys. I've got a table "BC_Message_Assets" which has 3 FK's (MessageId, AssetId and StatusId). I create my "MessageAsset" like this MessageAsset messageAsset = new MessageAsset(); messageAsset.MessageStatusReference.EntityKey = new EntityKey("MyEntities.MessageStatusSet", "Id", 1); messageAsset.AssetReference.EntityKey = new EntityKey("MyEntities.AssetSet", "Id", 1); messageAsset.MessageReference.EntityKey = new EntityKey("MyEntities.MessageSet", "Id", messageId); context.AddToMessageAssetSet(messageAsset); context.SaveChanges(); But I got the following exception : The INSERT statement conflicted with the FOREIGN KEY constraint \"FK_BC_Message_Assets_BC_Assets\". The conflict occurred in database \"Test\", table \"dbo.BC_Assets\", column 'Id'.\r\nThe statement has been terminated. When I look at the query, I notice that the parameter value for AssetId is "0" despite that I provided "1" to the EntityKey. Here's the generated query : exec sp_executesql N'insert [dbo].[BC_Message_Assets]([MessageId], [AssetId], [CompletionTime], [StatusId]) values (@0, @1, null, @2) ',N'@0 int,@1 int,@2 int',@0=47,@1=0,@2=1 I can't explain what happens. I hardcoded "1" in the EntityKey and I received "0" in the query ?

    Read the article

  • cascading combo box causing empty fields in next record

    - by glinch
    Hi there, I'm having problems with a cascading combo box. Everything works fine with the combo boxes and the values get populated correctly. Private Sub cmbAdjComp_AfterUpdate() Me.cboAdjOff.RowSource = "SELECT AdjusterCompanyOffice.ID, AdjusterCompanyOffice.Address1, AdjusterCompanyOffice.Address2, AdjusterCompanyOffice.Address3, AdjusterCompanyOffice.Address4, AdjusterCompanyOffice.Address5 FROM" & _ " AdjusterCompanyOffice WHERE AdjusterCompanyOffice.AdjCompID = " & Me.cmbAdjComp.Column(1) & _ " ORDER BY AdjusterCompanyOffice.Address1" Me.cboAdjOff = Me.cboAdjOff.ItemData(0) End Sub The secondary combo box has a row source query: SELECT AdjusterCompanyOffice.ID, AdjusterCompanyOffice.Address1, AdjusterCompanyOffice.Address2, AdjusterCompanyOffice.Address3, AdjusterCompanyOffice.Address4, AdjusterCompanyOffice.Address5 FROM AdjusterCompanyOffice ORDER BY AdjusterCompanyOffice.Address1; Both comboboxes have the same controlsource. Everything works fine and dandy moving between records and the boxes show the correct fields for each record. When i use the first combo box, and then select the appropriate option in the second combo box, everything works great on the specific record. However when I move to the next record, the values in the second combo box are all empty. If i close the form and reopen it, and avoid using the cascading combo boxes all the values are all correct when i move between records. Somehow using the cascading combo boxes creates a conflict with the row source of the secondary combo box. Hope that is clear! Have been rummaging around for an answer but cant find anything. any help would be greatly appreciated. Thanks Noel

    Read the article

  • linebreak in url with Bibtex and hyperref package

    - by Tim
    Why is this item not shown properly in my bibliography? @misc{ann, abstract = {ANN is an implbmentation of nearest neighbor search.}, author = {David M. Mount and Sunil Arya}, howpublished = {\url{http://www.cs.umd.edu/~mount/ANN/}}, keywords = {knn}, posted-at = {2010-04-08 00:05:04}, priority = {2}, title = {ANN.}, url = "http://www.cs.umd.edu/~mount/ANN/", year = {2008} } @misc{Nilsson96introductionto, author = {Nilsson, Nils J.}, citeulike-article-id = {6995464}, howpublished = {\url{http://robotics.stanford.edu/people/nilsson/mlbook.html}}, keywords = {*file-import-10-04-11}, posted-at = {2010-04-11 06:52:28}, priority = {2}, title = {Introduction to Machine Learning: An Early Draft of a Proposed Textbook.}, year = {1996} } EDIT: I am using \usepackage{hyperref}, not \usepackage{url}. I don't know what changes I just made made the first item appear properly now @misc{ann, abstract = {ANN is an implbmentation of nearest neighbor search.}, author = {David M. Mount and Sunil Arya}, howpublished = {\url{http://www.cs.umd.edu/~mount/ANN/}}, keywords = {ann}, posted-at = {2010-04-08 00:05:04}, priority = {2}, title = {The \textsc{A}pproximate \textsc{N}earest \textsc{N}eighbor \textsc{S}earching \textsc{L}ibrary.}, url = "http://www.cs.umd.edu/~mount/ANN/", year = {2008} } EDIT: Since I am using hyperref package, it produces error when using url package together with it. So the two cannot work together? I would like to use hyper links inside pdf file, so I would like to use hyperref package instead of url package. I googled a bit, and try \usepackage[hyperindex,breaklinks]{hyperref}, but there is still no line break just as before. How can I do it? Is there conflict in the packages that I am now using?: \usepackage{amsmath} \usepackage{amsfonts} \usepackage[dvips]{graphicx} \usepackage{wrapfig} \graphicspath{{./figs/}} \DeclareGraphicsExtensions{.eps} \usepackage{fixltx2e} \usepackage{array} \usepackage{times} \usepackage{fancyhdr} \usepackage{multirow} \usepackage{algorithmic} \usepackage{algorithm} \usepackage{slashbox} \usepackage{multirow} \usepackage{rotating} \usepackage{longtable} \usepackage[hyperindex,breaklinks]{hyperref} \usepackage{forloop} \usepackage{lscape} \usepackage{supertabular} \usepackage{amssymb} \usepackage{amsthm}

    Read the article

  • Is this error caused by a 64-bit library being accessed by a Java program running in a 32-bit JVM?

    - by Mike
    I'm trying to create a simple Java app that uses JNI to call some native functions. I've followed the examples in the JNI Programming Guide and can't seem to get them to work. I have the following Hello World program, written in Java: class HelloWorld { private native void print(); public static void main(String [] args) { new HelloWorld().print(); } static { System.load("/home/mike/Desktop/libHelloWorld.so"); } } I compile it using javac HelloWorld.java, just like normal. Then I run javah -jni HelloWorld, and finally the following: gcc34 -shared -fpic -o libHelloWorld.so -I/<path to JDK>/include -I/<path to JDK>/include/linux HelloWorld.c gcc34 is the name of the GCC program on my machine here at work (I don't control that) and I obviously place the real path to the JDK in that command. When I run my program, using the standard java HelloWorld, I get an error saying the following: Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/mike/Desktop/libHelloWorld.so: /home/mike/Desktop/libHelloWorld.so: wrong ELF class: ELFCLASS64 (Possible causes: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674) at java.lang.Runtime.load0(Runtime.java:770) at java.lang.System.load(System.java:1003) at HelloWorld.<clinit>(HelloWorld.java:8) Could not find the main class: HelloWorld. Program will exit. I know I'm running a 32-bit JVM (and unfortunately, as of right now, I'm not allowed to get a 64-bit JVM). I tried telling GCC to compile in 32-bit mode using the "-m32" option, but we don't have (and again, can't get) what we need for that. Does this sound like a 32/64-bit conflict or something else?

    Read the article

  • Axis2 webservice (aar archive) properties file

    - by XpiritO
    Hi there, guys. I'm currently developing a set of SOAP webservices over Axis2, deployed over a clustered WebLogic 10.3.2 environment. My webservices use some user settings that I want to be editable without the need for recompiling and regenerating the AAR archive. With this in mind, I chose to put them into a properties file that is loaded and consumed in runtime. Unfortunately, I'm having some questions about this: As far as I know, to achieve what I want, the only option is to put the properties file into the ../axis2/WEB-INF/classes directory of each one of the deployments (on each WebLogic instance) I currently have on my clustered configuration, and then load the file, as follows (or equivalent, this has not been verified for optimization): InputStreamReader fMainProp = new InputStreamReader(this.getClass().getResourceAsStream("myfile.properties")); Properties mainProp = new Properties(); mainProp.load(fMainProp); This is not as practical as I wanted it to be, because each time I want to alter some setting on the properties file, I have to edit each one of the files (deployed over different WebLogic instances) and there is a high probability of modifying one of these files without modifying the others. What I would like to know is if there is any (better) alternative to accomplish what I want, minimizing the potential conflict of configuration that is created by distributing and replicating the properties file through multiple WebLogic instances.

    Read the article

  • Fancybox "close" hangs/delays in IE7/8

    - by Kerri
    I'm having an issue with IE7/8 only on a development site: when closing the Fancybox, there is a major delay, sometimes about ten seconds or so, sometimes much longer (like a minute). Some things that might be relevant: • Using fancybox 1.3.1 • Works perfectly on all other browsers (FF, Safari, Opera, Chrome) • The loaded iframe contains a flash "virtual tour" • There are no errors reported in IE's Dev Toolbar or in DebugBar • The fancybox renders perfectly in IE, and after it has closed, there is not a problem loading it again. The closing seems to be the only issue. (That, and that it crashed the client's browser once, but I'm inclined to believe that had more to do with the content of the iframe than fancybox). I changed the link to the iFrame to something simpler (google), and it closed with no problem. So it does seem to have something to do with a conflict with the content of the iframe. The call: $("a#tourbox").fancybox({ "width": 750, "height" : 575, "autoScale": false, "type": "iframe" }); The HTML: <a id="tourbox" href="http://tour.circlepix.com/tour.htm?id=670335"><img src="sites/all/themes/removed/images/banquets-vtour.jpg" alt="Virtual Tour" /></a> Here's a link to the page with the problem: http://s93571.gridserver.com/banquets Click on the "Go to 360° Virtual Tour" image. Here's the page it loads: http://tour.circlepix.com/tour.htm?id=670335 I'd greatly appreciate any clues or ideas of what might be the issue. I couldn't find any other discussions with a similar problem. Thanks for any insights!

    Read the article

  • how to use appcfg.py for google-app-engine projects created using google's eclipse plugin?

    - by Aadith
    I have created a google-app-engine java project in Eclipse using Google's Eclipse plugin. My previous attempt to deploy failed. Now, when I retry, I get the following message: Unable to update app: Error posting to URL : http://appengine.google.com/api/appversion/create?app_id=mybdaywisherversion=1 409 conflict Another transaction for this user is already in progress for this app and major version. That user can undo the transaction with appcfg.py's "rollback" command. Now, I have always used the google-app-engine features from inside Eclipse only and have not a clue how to run the appcfg.py command. Could not get much help from documentation available over the internet. The only thing I could make out was for mac (I'm on mac), the command to be used is appcfg.sh. Inside Eclipse, I looked where App-Engine SDK is located on my machine and went to that location. Even found appcfg.sh there. But when I try to run it, it only reports the error "command not found". Tried various alternatives to run it (like tried running it with sudo, tried running it as ./appcfg.sh by going to whether its located) but no success Can someone please tell me the step I will have to follow to run the apcfg command?

    Read the article

  • XAML Deserialization problem

    - by mrwayne
    Hi, I have a block of XAML of which i'm trying to deserialize. For arguments sake lets say it looks like below. <NS:SomeObject> <NS:SomeObject.SomeProperty> <NS:SomeDifferentObject SomeOtherProp="a value"/> </NS:SomeObject.SomeProperty> </NS:SomeObject> Of which i deserialise using the following code. XamlReader.Load( File.OpenRead( @"c:\SomeFile.xaml")) I have 2 solutions, one i use Unit Testing, and another i have for my web application. When i'm using the unit testing solution, it deserializes fine and works as expected. However, when i try to deserialize using my other project i keep getting an exception like the following. 'NameSpace.SomeObject' value cannot be assigned to property 'SomeProperty' of object 'NameSpace.SomeObject'. Object of Type 'NameSpace.SomeObject' cannot be converted to type 'NameSpace.SomeObject'. It's as if it is getting confused or instantiating 2 different types of objects? Note, i do not have similarly named classes or any sort of namespace conflict. The same codes executes fine in one solution and not the other. The same project files are referenced in both. Please help!

    Read the article

  • Django: Using 2 different AdminSite instances with different models registered

    - by omat
    Apart from the usual admin, I want to create a limited admin for non-staff users. This admin site will have different registered ModelAdmins. I created a folder /useradmin/ in my project directory and similar to contrib/admin/_init_.py I added an autodiscover() which will register models defined in useradmin.py modules instead of admin.py: # useradmin/__init__.py def autodiscover(): # Same as admin.autodiscover() but registers useradmin.py modules ... for app in settings.INSTALLED_APPS: mod = import_module(app) try: before_import_registry = copy.copy(site._registry) import_module('%s.useradmin' % app) except: site._registry = before_import_registry if module_has_submodule(mod, 'useradmin'): raise I also cretated sites.py under useradmin/ to override AdminSite similar to contrib/admin/sites: # useradmin/sites.py class UserAdminSite(AdminSite): def has_permission(self, request): # Don't care if the user is staff return request.user.is_active def login(self, request): # Do the login stuff but don't care if the user is staff if request.user.is_authenticated(): ... else: ... site = UserAdminSite(name='useradmin') In the project's URLs: # urls.py from django.contrib import admin import useradmin admin.autodiscover() useradmin.autodiscover() urlpatterns = patterns('', (r'^admin/', include(admin.site.urls)), (r'^useradmin/', include(useradmin.site.urls)), ) And I try to register different models in admin.py and useradmin.py modules under app directories: # products/useradmin.py import useradmin class ProductAdmin(useradmin.ModelAdmin): pass useradmin.site.register(Product, ProductAdmin) But when registering models in useradmin.py like useradmin.site.register(Product, ProductAdmin), I get 'module' object has no attribute 'ModelAdmin' exception. Though when I try this via shell; import useradmin from useradmin import ModelAdmin does not raise any exception. Any ideas what might be wrong? Edit: I tried going the @Luke way and arranged the code as follows as minimal as possible: (file paths are relative to the project root) # admin.py from django.contrib.admin import autodiscover from django.contrib.admin.sites import AdminSite user_site = AdminSite(name='useradmin') # urls.py (does not even have url patterns; just calls autodiscover()) import admin admin.autodiscover() # products/admin.py import admin from products.models import Product admin.user_site.register(Product) As a result I get an AttributeError: 'module' object has no attribute 'user_site' when admin.user_site.register(Product) in products/admin.py is called. Any ideas? Solution: I don't know if there are better ways but, renaming the admin.py in the project root to useradmin.py and updating the imports accordingly resolved the last case, which was a naming and import conflict.

    Read the article

  • Optimizing a lot of Scanner.findWithinHorizon(pattern, 0) calls

    - by darvids0n
    I'm building a process which extracts data from 6 csv-style files and two poorly laid out .txt reports and builds output CSVs, and I'm fully aware that there's going to be some overhead searching through all that whitespace thousands of times, but I never anticipated converting about about 50,000 records would take 12 hours. Excerpt of my manual matching code (I know it's horrible that I use lists of tokens like that, but it was the best thing I could think of): public static String lookup(List<String> tokensBefore, List<String> tokensAfter) { String result = null; while(_match(tokensBefore)) { // block until all input is read if(id.hasNext()) { result = id.next(); // capture the next token that matches if(_matchImmediate(tokensAfter)) // try to match tokensAfter to this result return result; } else return null; // end of file; no match } return null; // no matches } private static boolean _match(List<String> tokens) { return _match(tokens, true); } private static boolean _match(List<String> tokens, boolean block) { if(tokens != null && !tokens.isEmpty()) { if(id.findWithinHorizon(tokens.get(0), 0) == null) return false; for(int i = 1; i <= tokens.size(); i++) { if (i == tokens.size()) { // matches all tokens return true; } else if(id.hasNext() && !id.next().matches(tokens.get(i))) { break; // break to blocking behaviour } } } else { return true; // empty list always matches } if(block) return _match(tokens); // loop until we find something or nothing else return false; // return after just one attempted match } private static boolean _matchImmediate(List<String> tokens) { if(tokens != null) { for(int i = 0; i <= tokens.size(); i++) { if (i == tokens.size()) { // matches all tokens return true; } else if(!id.hasNext() || !id.next().matches(tokens.get(i))) { return false; // doesn't match, or end of file } } return false; // we have some serious problems if this ever gets called } else { return true; // empty list always matches } } Basically wondering how I would work in an efficient string search (Boyer-Moore or similar). My Scanner id is scanning a java.util.String, figured buffering it to memory would reduce I/O since the search here is being performed thousands of times on a relatively small file. The performance increase compared to scanning a BufferedReader(FileReader(File)) was probably less than 1%, the process still looks to be taking a LONG time. I've also traced execution and the slowness of my overall conversion process is definitely between the first and last like of the lookup method. In fact, so much so that I ran a shortcut process to count the number of occurrences of various identifiers in the .csv-style files (I use 2 lookup methods, this is just one of them) and the process completed indexing approx 4 different identifiers for 50,000 records in less than a minute. Compared to 12 hours, that's instant. Some notes (updated): I don't necessarily need the pattern-matching behaviour, I only get the first field of a line of text so I need to match line breaks or use Scanner.nextLine(). All ID numbers I need start at position 0 of a line and run through til the first block of whitespace, after which is the name of the corresponding object. I would ideally want to return a String, not an int locating the line number or start position of the result, but if it's faster then it will still work just fine. If an int is being returned, however, then I would now have to seek to that line again just to get the ID; storing the ID of every line that is searched sounds like a way around that. Anything to help me out, even if it saves 1ms per search, will help, so all input is appreciated. Thankyou! Usage scenario 1: I have a list of objects in file A, who in the old-style system have an id number which is not in file A. It is, however, POSSIBLY in another csv-style file (file B) or possibly still in a .txt report (file C) which each also contain a bunch of other information which is not useful here, and so file B needs to be searched through for the object's full name (1 token since it would reside within the second column of any given line), and then the first column should be the ID number. If that doesn't work, we then have to split the search token by whitespace into separate tokens before doing a search of file C for those tokens as well. Generalised code: String field; for (/* each record in file A */) { /* construct the rest of this object from file A info */ // now to find the ID, if we can List<String> objectName = new ArrayList<String>(1); objectName.add(Pattern.quote(thisObject.fullName)); field = lookup(objectSearchToken, objectName); // search file B if(field == null) // not found in file B { lookupReset(false); // initialise scanner to check file C objectName.clear(); // not using the full name String[] tokens = thisObject.fullName.split(id.delimiter().pattern()); for(String s : tokens) objectName.add(Pattern.quote(s)); field = lookup(objectSearchToken, objectName); // search file C lookupReset(true); // back to file B } else { /* found it, file B specific processing here */ } if(field != null) // found it in B or C thisObject.ID = field; } The objectName tokens are all uppercase words with possible hyphens or apostrophes in them, separated by spaces. Much like a person's name. As per a comment, I will pre-compile the regex for my objectSearchToken, which is just [\r\n]+. What's ending up happening in file C is, every single line is being checked, even the 95% of lines which don't contain an ID number and object name at the start. Would it be quicker to use ^[\r\n]+.*(objectname) instead of two separate regexes? It may reduce the number of _match executions. The more general case of that would be, concatenate all tokensBefore with all tokensAfter, and put a .* in the middle. It would need to be matching backwards through the file though, otherwise it would match the correct line but with a huge .* block in the middle with lots of lines. The above situation could be resolved if I could get java.util.Scanner to return the token previous to the current one after a call to findWithinHorizon. I have another usage scenario. Will put it up asap.

    Read the article

  • Error Ant Build/deploy to websphere 7.0

    - by adisembiring
    Hi I'm trying to build/deploy war to websphere process server 7.0. and I run on windows environment. I use http://illegalargumentexception.blogspot.com/2008/08/ant-automated-deployment-to-websphere.html as my reference. and http://illegalargumentexception.googlecode.com/svn/trunk/code/java/WebSphereAntFiles/ as my sample code to deployed. this is my buil.properies is ? #build properties mywebappear=D:/data/code/WebSphereAntFiles/scripts/test/mywebappEAR.ear #WAS6 install directory was_home=C:/IBM/WID7_WTE/runtimes/bi_v7 #server name (see cell/node/server; e.g. "server1") was_server=server1 #user + password; for use when security is enabled was_user=admin was_password=admin #stops scripts on problem was_failonerror=true #virtual host was_virtualhost=default_host #Absolute path to EAR file #was_ear=fooEAR.ear #Name of the enterprise application #was_appname=fooEAR this is my console while I trying to build with ws_ant.bat [wsDefaultBindings] mywebapp.war [wsDefaultBindings] <virtual-host> --> default_host [wsDefaultBindings] [wsDefaultBindings] ------------------------ [wsDefaultBindings] Saving EAR File to directory [wsDefaultBindings] Saved EAR File to directory Successfully test_wsStartServer: WAS_wsStartServer: depCheck: depCheck: [startServer] ADMU0116I: Tool information is being logged in file [startServer] C:\IBM\WID7_WTE\runtimes\bi_v7\profiles\qwps\logs\server1\startServer.log [startServer] ADMU0128I: Starting tool with the qwps profile [startServer] ADMU3100I: Reading configuration for server: server1 [startServer] ADMU3028I: Conflict detected on port 8880. Likely causes: a) An instance of [startServer] the server server1 is already running b) some other process is [startServer] using port 8880 [startServer] ADMU3027E: An instance of the server may already be running: server1 [startServer] ADMU0111E: Program exiting with error: [startServer] com.ibm.websphere.management.exception.AdminException: ADMU3027E: An [startServer] instance of the server may already be running: server1 [startServer] ADMU1211I: To obtain a full trace of the failure, use the -trace option. [startServer] ADMU0211I: Error details may be seen in the file: [startServer] C:/IBM/WID7_WTE/runtimes/bi_v7/profiles/qwps\logs\server1\startServer.log BUILD FAILED D:\data\code\WebSphereAntFiles\scripts\test\build.xml:68: The following error occurred while executing this line: D:\data\code\WebSphereAntFiles\scripts\was\wsStartServer.xml:49: Java returned: -1

    Read the article

  • Unable to import Eclipse project to Android studio

    - by Binoy Babu
    Whenever I try to import my Eclipse project to Android Studio I get the following error : You are using an old, unsupported version of Gradle. Please use version 1.8 or greater. Please point to a supported Gradle version in the project's Gradle settings or in the project's Gradle wrapper (if applicable.) Consult IDE log for more details (Help | Show Log) Im using Android Studio 0.3 and Ubuntu, I also tried it on a Windows 8 box with fresh install but getting the same error. I'm using default gradle wrapper and I tried checking and unchecking auto import option. Is this a bug? How can I get around it. How do I update gradle to 1.8 or check the current gradle version? My build.gradle is given below. buildscript { repositories { mavenCentral() } dependencies { classpath 'com.android.tools.build:gradle:0.6.3' // I also tried using 0.6.1 and 0.5.+ } } apply plugin: 'android' dependencies { compile fileTree(dir: 'libs', include: '*.jar') } android { compileSdkVersion 18 buildToolsVersion "18.0.1" sourceSets { main { manifest.srcFile 'AndroidManifest.xml' java.srcDirs = ['src'] resources.srcDirs = ['src'] aidl.srcDirs = ['src'] renderscript.srcDirs = ['src'] res.srcDirs = ['res'] assets.srcDirs = ['assets'] } // Move the tests to tests/java, tests/res, etc... instrumentTest.setRoot('tests') // Move the build types to build-types/<type> // For instance, build-types/debug/java, build-types/debug/AndroidManifest.xml, ... // This moves them out of them default location under src/<type>/... which would // conflict with src/ being used by the main source set. // Adding new build types or product flavors should be accompanied // by a similar customization. debug.setRoot('build-types/debug') release.setRoot('build-types/release') } }

    Read the article

  • Objective-C object release and allocation timing

    - by ryanjm.mp
    The code for this question is too long to be of any use. But I'm pretty sure my problem has to do with releasing a class. I have a helper class, ConnectionHelper.h/.m, that handles a NSURLConnection for me. Basically, I give it the URL I want and it returns the data (it happens to do a quick json parse on it too). It has a delegate which I set to the calling class (in this case: DownloadViewController). When it finishes the download, it calls [delegate didFinishParseOf:objectName withDictionary:dictionary];. Then in DownloadViewController I release ConnectionHelper and alloc a new one in order to download the next object. My problem is, I do this once, and then it creates the connection for the second one, and then my program just crashes. After this call: [[NSHTTPCookieStorage sharedHTTPCookieStorage] setCookieAcceptPolicy:NSHTTPCookieAcceptPolicyNever]; NSURLConnection *theConnection=[[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; Then I don't think any of the following methods are called: - (NSCachedURLResponse *)connection:(NSURLConnection *)connection willCacheResponse:(NSCachedURLResponse *)cachedResponse - (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data - (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error - (void)connection:(NSURLConnection *)connection didReceiveAuthenticationChallenge:(NSURLAuthenticationChallenge *)challenge So am I right in that I'm not releasing something? When I release it the first time, the dealloc function isn't being called. Is there a way I can "force" it to deallocate? Do I need to force it to? I didn't think it would matter since I allocating a new ConnectionHelper for the new call. How else would they overlap / conflict with each other? Thank you.

    Read the article

  • Access custom error messages for InArray validator when using Zend_Form_Element_Select

    - by Ben Waine
    Hello, I'm using Zend Framework 1.62 (becuase we are deploying the finished product to a Red Hat instance, which doesn't have a hgih enough PHP version to support ZF1.62). When creating a Form using Zend Form, I add a select element, add some multi options. I use the Zend Form as an in-object validation layer, passing an objects values through it and using the isValid method to determine if all the values fall within normal parameters. Zend_Form_Element_Select works exactly as expected, showing invalid if any other value is input other than one of the multi select options I added. The problem comes when I want to display the form at some point, I cant edit the error message created by the pre registered 'InArray' validator added automatically by ZF. I know I can disable this behaviour, but it works great apart from the error messages. I've tryed the following: $this->getElement('country')->getValidator('InArray')->setMessage('The country is not in the approved lists of countries'); // Doesn't work at all. $this->getElement('country')->setErrorMessage('The country is not in the approved lists of countries'); // Causes a conflict elswhere in the application and doesnt allow granular control of error messages. Anyone have any ideas? Ben

    Read the article

  • Merge replication server side foreign key violation from unpublished table

    - by Reiste
    We are using SQL Server 2005 Merge Replication with SQL CE 3.5 clients. We are using partitions with filtering for the separate subscriptions, and nHibernate for the ORM mapping. There is automatic ID range management from SQL Server for the subscriptions. We have a table, Item, and a table with a foreign key to Item - ItemHistory. Both of these are replicated down, filtered according to the subscription. Item has a column called UserId, and is filtered per subscription with this filter: WHERE UserId IN (SELECT... [complicated subselect]...) ItemHistory hangs off Item in the publication filter articles. On the server, we have a table ItemHistoryExport, which has a foreign key to ItemHistory. ItemHistoryExport is not published. Entries in the Item and ItemHistory tables are never deleted, on the server or the client. However, the "ownership" of items (and hence their ItemHistories) MAY change, which causes them to be moved from one client subscription/partition to another from time to time. When we sync, we occasionally get the following error: A row delete at '48269404 - 4108383dbb11' could not be propagated to 'MyServer\MyInstance.MyDatabase'. This failure can be caused by a constraint violation. The DELETE statement conflicted with the REFERENCE constraint "FK_ItemHistoryExport_ItemHistory". The conflict occurred in database "MyDatabase", table "dbo.ItemHistoryExport", column 'ItemHistoryId'. Can anyone help us understand why this happens? There shouldn't ever be a delete happening on the server side.

    Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >