adobe reader - Page 158

From the Tips Box: Pre-installation Prep Work Makes Service Pack Upgrades Smoother

- by Jason Fitzpatrick

Last month Microsoft rolled out Windows 7 Service Pack 1 and, like many SP releases, quite a few people are hanging back to see what happens. If you want to update but still error on the side of caution, reader Ron Troy offers a step-by-step guide. Ron’s cautious approach does an excellent job minimizing the number of issues that could crop up in a Service Pack upgrade by doing a thorough job updating your driver sets and clearing out old junk before you roll out the update. Read on to see how he does it: Just wanted to pass on a suggestion for people worried about installing Service Packs. I came up with a ‘method’ a couple years back that seems to work well. Run Windows / Microsoft Update to get all updates EXCEPT the Service Pack. Use Secunia PSI to find any other updates you need. Use CCleaner or the Windows disk cleanup tools to get rid of all the old garbage out there. Make sure that you include old system updates. Obviously, back up anything you really care about. An image backup can be real nice to have if things go wrong. Download the correct SP version from Microsoft.com; do not use Windows / Microsoft Update to get it. Make sure you have the 64 bit version if that’s what you have installed on your PC. Make sure that EVERYTHING that affects the OS is up to date. That includes all sorts of drivers, starting with video and audio. And if you have an Intel chipset, use the Intel Driver Utility to update those drivers. It’s very quick and easy. For the video and audio drivers, some can be updated by Intel, some by utilities on the vendor web sites, and some you just have to figure out yourself. But don’t be lazy here; old drivers and Windows Service Packs are a poor mix. If you have 3rd party software, check to see if they have any updates for you. They might not say that they are for the Service Pack but you cut your risk of things not working if you do this. Shut off the Antivirus software (especially if 3rd party). Reboot, hitting F8 to get the SafeMode menu. Choose SafeMode with Networking. Log into the Administrator account to ensure that you have the right to install the SP. Run the SP. It won’t be very fancy this way. Maybe 45 minutes later it will reboot and then finish configuring itself, finally letting you log in. Total installation time on most of my PC’s was about 1 hour but that followed hours of preparation on each. On a separate note, I recently got on the Nvidia web site and their utility told me I had a new driver available for my GeForce 8600M GS. This laptop had come with Vista, now has Win 7 SP1. I had a big surprise from this driver update; the Windows Experience Score on the graphics side went way up. Kudo’s to Nvidia for doing a driver update that actually helps day to day usage. And unlike ATI’s updates (which I need for my AGP based system), this update was fairly quick and very easy. Also, Nvidia drivers have never, as I can recall, given me BSOD’s, many of which I’ve gotten from ATI (TDR errors).How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

Read the article

SQL SERVER – Free Print Book on SQL Server Joes 2 Pros Kit

- by pinaldave

Rick Morelan and I were discussing earlier this month that what we can give back to the community. We believe our books are very much successful and very well received by the community. The five books are a journey from novice to expert. The books have changed many lives and helped many get jobs as well pass the SQL Certifications. Rick is from Seattle, USA and I am from Bangalore, India. There are 12 hours difference between us. We try to do weekly meeting to catch up on various personal and SQL related topics. Here is one of our recent conversations. Rick and Pinal Pinal: Good Morning Rick! Rick: Good Morning…err… Good Evening to you – Pinal! Pinal: Hey Rick, did you read the recent email which I sent you – one of our reader is thanking us for writing Joes 2 Pros series. He wants to dedicate his success to us. Can you believe it? Rick: Yeah, he is very kind but did you tell him that it is all because of his hard work on learning subject and we have very little contribution in his success. Pinal: Absolutely, I told him the same – I said we just wrote the book but it is he who learned from it and proved himself in his job. It is all him! We were just igniters. Rick: Good response. Pinal: Hey Rick! Are we doing enough for the community? What can we do more? Rick: Hmmm… Let us do something more. Pinal: Remember once we discussed the idea of if anyone who buys our Joes 2 Pros Combo Kit in the next 2 weeks – we will send them SQL Wait Stats for free. What do you say? Rick: I agree! Great Idea! Let us do it. Free Giveaway Well Rick and I liked the idea of doing more. We have decided to give away free SQL Server Wait Stats books to everybody who will purchase Joes 2 Pros Combo Kit between today (Oct 15, 2012) and Oct 26, 2012. This is not a contest or a lucky winner opportunity. Everybody who participates will qualify for it. Combo Availability USA – Amazon India - Flipkart | Indiaplaza Note1: USA kit contains FREE 5 DVDs. India Kit does not contain 5 DVDs due to legal issues. Note2: Indian Kit is priced at special Indian Economic Price. Qualify for Free Giveaway You must have purchased our Joes 2 Pros Combo Kit of 5 books between Oct 15, 2012 and Oct 26, 2012. Purchase before Oct 15, 2012 and after Oct 26, 2012 will not qualify for this giveaway. Send your original receipt (email, order details) to following addresses: “[email protected];[email protected]” with the subject line “Joes 2 Pros Kit Promotion Free Offer”. Do not change the subject line or your email may be missed. Clearly mention your shipping address with phone number and pin/zip code. Send your receipt before Oct 30, 2012. We will not entertain any conversation after Oct 30, 2012 cut off date. The Free books will be sent to USA and India address only. Availability USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLServer, T SQL, Technology

Read the article

How to make software development decisions based on facts

- by Laila

We love to hear stories about the many and varied ways our customers use the tools that we develop, but in our earnest search for stories and feedback, we'd rather forgotten that some of our keenest users are fellow RedGaters, in the same building. It was almost by chance that we discovered how the SQL Source Control team were using SmartAssembly. As it happens, there is a separate account (here on Simple-Talk) of how SmartAssembly was used to support the Early Access program; by providing answers to specific questions about how the SQL Source Control product was used. But what really got us all grinning was how valuable the SQL Source Control team found the reports that SmartAssembly was quickly and painlessly providing. So gather round, my friends, and I'll tell you the Tale Of The Framework Upgrade . <strange mirage effect to denote a flashback. A subtle background string of music starts playing in minor key> Kevin and his team were undecided. They weren't sure whether they could move their software product from .NET 2 to .NET 3.5 , let alone to .NET 4. You see, they were faced with having to guess what version of .NET was already installed on the average user's machine, which I'm sure you'll agree is no easy task. Upgrading their code to .NET 3.5 might put a barrier to people trying the tool, which was the last thing Kevin wanted: "what if our users have to download X, Y, and Z before being able to open the application?" he asked. That fear of users having to do half an hour of downloads (.followed by at least ten minutes of installation. followed by a five minute restart) meant that Kevin's team couldn't take advantage of WCF (Windows Communication Foundation). This made them sad, because WCF would have allowed them to write their code in a much simpler way, and in hours instead of days (as was the case with .NET 2). Oh sure, they had a gut feeling that this probably wasn't the case, 3.5 had been out for so many years, but they weren't sure. <background music switches to major key> SmartAssembly Feature Usage Reporting gave Kevin and his team exactly what they needed: hard data on their users' systems, both hardware and software. I was there, I saw it happen, and that's not the sort of thing a woman quickly forgets. I'll always remember his last words (before he went to lunch): "You get lots of free information by just checking a box in SmartAssembly" is what he said. For example, they could see how many CPU cores their customers were using, and found out that they should be making use of parallelism to take advantage of available cores. But crucially, (and this is the moral of my tale, dear reader), Kevin saw that 99% of SQL Source Control's users were on .NET 3.5 or above. So he knew that they could make the switch and that is was safe to do so. With this reassurance, they could use WCF to not only make development easier, but to also give them a really nice way to do inter-process communication between the Source Control and the SQL Compare products. To have done that on .NET 2.0 was certainly possible <knowing chuckle>, but Microsoft have made it a lot easier with WCF. <strange mirage effect to denote end of flashback> So you see, with Feature Usage Reporting, they finally got the hard evidence they needed to safely make the switch to .NET 3.5, knowing it would not inconvenience their users. And that, my friends, is just the sort of thing we like to hear.

Read the article

Boost Netbook Speed with an SD Card & ReadyBoost

- by Matthew Guay

Looking for a way to increase the performance of your netbook? Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less. Even if you want to add more ram, often they can only be upgraded to a max of 2GB. With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory. If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note: ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds. Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer. Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this. Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer. It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before. This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used. Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive. You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier. Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit. We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less. SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

Read the article

Travelling MVP #4: DevReach 2012

- by DigiMortal

Our next stop after Varna was Sofia where DevReach happens. DevReach is one of my favorite conferences in Europe because of sensible prices and strong speakers line-up. Also they have VIP-party after conference and this is good event to meet people you don’t see every day, have some discussion with speakers and find new friends. Our trip from Varna to Sofia took about 6.5 hours on bus. As I was tired from last evening it wasn’t problem for me as I slept half the trip. After smoking pause in Velike Tarnovo I watched movies from bus TV. We had supper later in city center Happy’s – place with good meat dishes and nice service. And next day it begun…. :) DevReach 2012 DevReach is held usually in Arena Mladost. It’s near airport and Telerik office. The event is organized by local MVP Martin Kulov together with Telerik. Two days of sessions with strong speakers is good reason enough for me to go to visit some event. Some topics covered by sessions: Windows 8 development web development SharePoint Windows Azure Windows Phone architecture Visual Studio Practically everybody can find some interesting session in every time slot. As the Arena is not huge it is very easy to go from one sessions to another if selected session for time slot is not what you expected. On the second floor of Arena there are many places where you can eat. There are simple chunk-food places like Burger King and also some restaurants. If you are hungry you will find something for your taste for sure. Also you can buy beer if it is too hot outside :) Weather was very good for October – practically Estonian summer – 25C and over. Sessions I visited Here is the list of sessions I visited at DevReach 2012: DevReach 2012 Opening & Welcome Messsage with Martin Kulov and Stephen Forte Principled N-Tier Solution Design with Steve Smith Data Patterns for the Cloud with Brian Randell .NET Garbage Collection Performance Tips with Sasha Goldshtein Building Secured, Scalable, Low-latency Web Applications with the Windows Azure Platform with Ido Flatow It’s a Knockout! MVVM Style Web Applications with Charles Nurse Web Application Architecture – Lessons Learned from Adobe Brackets with Brian Rinaldi Demystifying Visual Studio 2012 Performance Tools with Martin Kulov SPvNext – A Look At All the Exciting And New Features In SharePoint with Sahil Malik Portable Libraries – Why You Should Care with Lino Tadros I missed some sessions because of some death march projects that are going and that I have to coordinate but it was not big loss as I had time to walk around in session venue neighborhood and see Sofia Business Park. Next year again! I will be there again next year and hopefully more guys from Estonia will join me. I think it’s good idea to take short vacation for DevReach time and do things like we did this time – Bucharest, Varna, Sofia. It’s only good idea to plan some more free time so we are not very much in hurry and also we have no work stuff to do on the trip. This far this trip has been one of best trips I have organized and I will go and meet all those guys in this region again! :)

Read the article

Cross platform application revolution

- by anirudha

Every developer know that if they make a windows application that they work only on windows. that’s a small pity thing we all know. this is a lose point for windows application who make developer thing small means only for windows and other only for mac. this is a big point behind success of web because who purchase a operating system if they want to use a application on other platform. why they purchase when they can’t try them. that’s a thing better in Web means IE 6 no problem IE 6 to IE 8 chrome to chrome 8 Firefox to Firefox 3.6.13 even that’s beta no problem the good website is shown as same as other browser. some minor difference may be can see. the cross platform application development thinking is much big then making a application who is only for some audience. the difference between audience make by OS what they use Windows or mac. if they use mac they can’t use this they use windows they can’t use this. Web for Everyone starting from a children to grandfather. male and female Everyone can use internet.no worrying what you have even you have Windows or mac , any browser even as silly IE 6. the cross platform have a good thing that “People”. everyone can use them without a problem that. just like some time problem come in windows that “some component is missing click here to get them” , you can’t use this [apps] software because you have windows sp1 , sp2 sp3. you need to install this first before this. this stupidity mainly comes in Microsoft software. in last year i found a issue on WPI that they force user to install another software when they get them from WPI. ex:- you need to install Visual studio 2008 before installing Visual studio 2010 express. are anyone tell me why user get old version 2008 when they get latest and express version. i never try again their to check the issue is solved or not. a another thing is you can’t get IE 9 on windows XP version. in that’case don’t thing and worrying about them because Firefox and Chrome is much better. the stupidity from Microsoft is too much. they never told you about Firebug even sometime they discuss about damage tool in IE they called them developer tool because they are Microsoft and they only thing how they can market their products. you need to install many thing without any reason such as many SQL server component even you use other RDBMS. you can’t say no to them because you need a tool and tool require a useless component called SQL server. i never found any software force me to install this for this and this for this before install me. that’s another good thing in WEB that no thing require i means you not need to install dotnet framework 4 before enjoy facebook or twitter. may be you found out that Microsoft's fail project Window planet force you to get silverlight before going their. i never hear about them. some month ago my friend talked to me about them i found nothing better their. Wha’t user do when facebook force user to install silverlight or adobe flash or may be Microsoft dotnet framework 4. if you not install them facebook tell you bye bye tata ! never come here before installing Microsoft dotnet framework 4. the door is open for you after installing them not before. the story is same as “ tell me sorry before coming in home” as mother says to their child when they do something wrong. the web never force you to do something for them. sometime they allow you to use other website account their that’s very fast login for you. because they know the importance of your time.

Read the article

A debugging experience with "highly compatible" ASP.NET 4.5

- by Jeff

I have to admit that I will pretty much upgrade software for no reason other than being on the latest version. I won't do it if it's super expensive (Adobe gets money from me about once every three or four years at best), but particularly with frameworks and stuff generally available as part of my MSDN subscription, I'll be bleeding edge. CoasterBuzz was running on the MVC 4 framework pretty much as soon as they did a "go live" license for it. I didn't really jump in head-first with Windows 8 and Visual Studio 2012, in part because I just wasn't interested in doing the reinstalls for each new version. Turns out there weren't that many revisions anyway. But when the final versions were released a week and a half ago, I jumped in. I saw on one of the Microsoft sites that .Net 4.5 was a "highly compatible in-place update" to the framework. Good enough for me. I was obviously running it by default in Windows 8, and installed it on my production server. I suppose it's "highly compatible," except when it isn't. Three of my sites are running with various flavors of the MVC version of POP Forums. All of them stopped working under ASP.NET 4.5. It was not immediately obvious what the problem might be beyond an exception indicating that there were no repository classes registered with Ninject, which I use for dependency injection in the forums. This was made all the more weird by the fact that it ran fine locally in the dev Web host. My first instinct was to spin up a Windows Server VM on my local box and put the remote debugger on it. (Side note: running multiple VM's on a Retina MacBook Pro with 16 gigs of RAM is pretty much the most awesome thing ever. I can't believe this computer is for real, and not a 50-pound tower under my desk.) What might have been going on in IIS that doesn't happen in Visual Studio? In the debugging process, I realized that I might be looking in the wrong place. POP Forums creates a Ninject container using a method called from a PreApplicationStartMethod attribute, and at that time registers a module (what Ninject uses to map interfaces to implementations) that maps all of the core dependencies. It also creates an instance of an HttpModule that originally hosted the "services" (search indexing, mailer, etc.), but now just records errors. That's all well and good, but the actual repository mapping, where data is actually read or persisted, happens in Application_Start() in global.asax. The idea there is that you can swap out the SqlSingleWebServer repos for something tuned for multiple servers, Oracle or something else. Of course, if I used something like StructureMap, which does convention-based mapping for dependency injection (a class implementing ISettingsRepository called SettingsRepository is automagically mapped), I wouldn't have to worry about it. In any case, the HttpModule, being instantiated before Application_Start() gets to run, would throw because there was no repo mapped where it could get settings from the database. This makes total sense. The fix is sort of a hack, where I don't setup the innards of the HttpModule until a call to its BeginRequest is made. I say it's a hack, because its primary function, logging exceptions, won't work until the app has warmed up. Still, this brings up an interesting question about the race condition, and what changed in 4.5 when it's running in IIS. In ASP.NET 4, it would appear that the code called via the PreApplicationStartMethod was either failing silently, and running again later, or it was getting to that code after Application_Start was called. In any case, weird thing. The real pain point I'm experiencing now is a bug in MVC 4 that is extremely serious because it renders the mobile/alternate view functionality very much broken.

Read the article

How to Watch NCAA March Madness Online

- by DigitalGeekery

You’ve filled out your brackets and now you are ready for one of America’s most popular sporting events. But what if you are you stuck at work or away from your TV? Or your local affiliate is showing a different game? Today we show how to catch all the March Madness online. March Madness on Demand You’ll need a broadband connection, 512 MB RAM or higher, with cookies and Javascript enabled in your browser. March Madness on Demand offers two viewing options, a Standard Player and a High Quality player. The High Quality player is not, unfortunately, high definition. Standard Player Requirements Windows XP/Vista/7 or Mac OS X IE 6+ (We also successfully tested it in Firefox, Chrome, & Opera) Adobe Flash Player 9 or higher High Quality Player Requirements 2.4 GHz Pentium 4 or Intel-based Macintosh Mac OS 10.4.8+ (Intel-based) Windows: XP SP2, Vista, Server 2003, Server 2008, Windows 7 Firefox 1.5+ or IE 6/7/8 Silverlight 3 browser plug-in Watching March Madness on Demand Go to the March Madness on Demand website. (Link below) Check the “Watch in High Quality” section to see if your browser is ready and compatible for the High Quality viewer. If not, you’ll see a message indicating either your browser and system are incompatible… Or that you need to install Silverlight. To install Silverlight, click on the “Get HQ” button and follow the prompts to download and install Silverlight. To launch the player, click the large red “Launch Player” button. At the top of the screen, you’ll see the current and upcoming games. Click on “Watch Now” below to begin watching. At the bottom left, is where you click to watch with the High Quality player. If to many people are watching the High Quality player, you’ll see the following message and have to go back to the Standard Player. At the lower right are volume controls, a “Full Screen” button, and a “Share” button which allows you to share the game you are watching on various social networking sites like Facebook and Twitter. Perhaps most importantly for those who want to steal a bit of viewing time while at work is the “Boss Button” at the top right. Clicking on the “Boss Button” will open a fake Office document so it may appear at first glance like you’re actually doing legitimate work. To return to the game, click anywhere on the screen with your mouse. You’ll be able to catch every single game of the tournament from the first round all the way through the championship with March Madness on Demand. If your computer and Internet connection can handle it, you can even watch multiple games at the same time by opening March Madness on Demand in multiple browser windows. Watch March Madness online Similar Articles Productive Geek Tips Weekend Fun: Watch Television on Your PC with AnyTVWatch NFL Sunday Night Football On Your PCWatch TV On Your PC with FreeZ Online TVGeek Fun: Download Favorite NBC Programs for FreeDitch the RealPlayer Bloat with Real Alternative TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

Read the article

How Exactly Is One Linux OS “Based On” Another Linux OS?

- by Jason Fitzpatrick

When reviewing different flavors of Linux, you’ll frequently come across phrases like “Ubuntu is based on Debian” but what exactly does that mean? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader PLPiper is trying to get a handle on how Linux variants work: I’ve been looking through quite a number of Linux distros recently to get an idea of what’s around, and one phrase that keeps coming up is that “[this OS] is based on [another OS]“. For example: Fedora is based on Red Hat Ubuntu is based on Debian Linux Mint is based on Ubuntu For someone coming from a Mac environment I understand how “OS X is based on Darwin”, however when I look at Linux Distros, I find myself asking “Aren’t they all based on Linux..?” In this context, what exactly does it mean for one Linux OS to be based on another Linux OS? So, what exactly does it mean when we talk about one version of Linux being based off another version? The Answer SuperUser contributor kostix offers a solid overview of the whole system: Linux is a kernel — a (complex) piece of software which works with the hardware and exports a certain Application Programming Interface (API), and binary conventions on how to precisely use it (Application Binary Interface, ABI) available to the “user-space” applications. Debian, RedHat and others are operating systems — complete software environments which consist of the kernel and a set of user-space programs which make the computer useful as they perform sensible tasks (sending/receiving mail, allowing you to browse the Internet, driving a robot etc). Now each such OS, while providing mostly the same software (there are not so many free mail server programs or Internet browsers or desktop environments, for example) differ in approaches to do this and also in their stated goals and release cycles. Quite typically these OSes are called “distributions”. This is, IMO, a somewhat wrong term stemming from the fact you’re technically able to build all the required software by hand and install it on a target machine, so these OSes distribute the packaged software so you either don’t need to build it (Debian, RedHat) or they facilitate such building (Gentoo). They also usually provide an installer which helps to install the OS onto a target machine. Making and supporting an OS is a very complicated task requiring a complex and intricate infrastructure (upload queues, build servers, a bug tracker, and archive servers, mailing list software etc etc etc) and staff. This obviously raises a high barrier for creating a new, from-scratch OS. For instance, Debian provides ca. 37k packages for some five hardware architectures — go figure how much work is put into supporting this stuff. Still, if someone thinks they need to create a new OS for whatever reason, it may be a good idea to use an existing foundation to build on. And this is exactly where OSes based on other OSes come into existence. For instance, Ubuntu builds upon Debian by just importing most packages from it and repackaging only a small subset of them, plus packaging their own, providing their own artwork, default settings, documentation etc. Note that there are variations to this “based on” thing. For instance, Debian fosters the creation of “pure blends” of itself: distributions which use Debian rather directly, and just add a bunch of packages and other stuff only useful for rather small groups of users such as those working in education or medicine or music industry etc. Another twist is that not all these OSes are based on Linux. For instance, Debian also provide FreeBSD and Hurd kernels. They have quite tiny user groups but anyway. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

Read the article

PDF Converter Elite Giveaway – Lets you create, convert and edit any type of PDF with ease

- by Gopinath

Are you looking for a PDF editing software that lets you create, edit and convert any type of PDF with ease? Then here is a chance for you to win a lifetime free license of PDF Converter Elite software. Tech Dreams in partnership with pdfconverter.com brings a giveaway contest exclusively for our readers. Continue reading to know the features of the application and giveaway contest details Adobe Acrobat is the best software for creating, editing and converting PDF files, but you need spend a lot of money to buy it. PDF Converter Elite, which is priced at $100 has a rich set of features that satisfies most of your PDF management needs. Here is a quick run down of the feature of the application Create PDF files from almost every popular Windows file format – You can create a PDF from almost 300 popular file formats supported by Windows. Want to convert a word document to PDF? It’s just a click away. How about converting Excels, PowerPoint presentations, text files, images, etc? Yes, with a single click you will be able to turn them to PDF Files. Convert PDF to Word, Excel, PowerPoint, Publisher, HTML – This is one of the best features i liked in this software. You can convert a PDF to any MS Office file format without loosing alignment and quality of the document. The converted documents looks exactly same as your PDF documents and you would be surprised to see near 100% layout replication in the converted document. I feel in love with the perfection at which the files are converted. Edit PDF files easily – You can rework with your PDF documents by inserting watermarks, numbers, headers, footers and more. Also you will be able to merge two PDF files, overlay pages, remove unwanted pages, split a single PDF in to multiple files. Secure PDF files by setting password – You can secure PDF files by limiting how others can use them – set password to open the documents, restrict various activities like printing, copy & paste, screen reading, form filling, etc.. If you are looking for an affordable PDF editing application then PDF Converter Elite is there for you. 10 x PDF Converter Elite Licenses Giveaway Here comes the details on wining a free single user license for our readers – we have 10 PDF Converter Elite single user licenses worth of $100 each. To win a license all you need to do is Like Tech Dreams Fan page on Facebook Tweet or Like this post – buttons are available just below the post heading in the top section of this page Finally drop a comment on how you would like to use PDF Converter Elite We will choose 10 winners through a lucky draw and the licenses will be sent to them in a personal email. Names of the winners will also be announced on Tech Dreams. So are you ready to grab a free copy of PDF Converter worth of $100?

Read the article

Enable Multi-Column Google Searches with a User Script

- by Asian Angel

Are you wanting to improve the search results view at Google and make better use of the webpage space? With a little user script magic you can make those search results look and fit better in your favorite browser. Note: This user script may conflict with the AutoPager extension if you have it installed in your favorite browser. Before Here is the standard single column view of search results at Google. Not too bad but the available space could certainly be better utilized. Note: For the purposes of our example we are using Google Chrome but this user script can be easily added to other browsers. After If you have never installed a user script in Chrome before it is just as simple as the regular extensions at the official Google website. Here you can see the details for the user script we are installing. Notice that you can view the source code if desired. To add the user script to Chrome click on “Install”. Once you start the install process you will see an intermediary message asking if you wish to continue in the lower left corner of your browser. Click “Continue” to move to the next step in the install process. From this point on the install process is practically identical to the official extensions. You can see the final confirmation window here…click “Install” to finish adding the user script to Chrome. As with regular extensions you will see a post-install message in the upper right corner. So, what does a user script look like in the “Extensions Page”? You can see the user script entry here…outside of an icon it looks rather identical to a normal extension. After refreshing the search page shown above we now have two columns of search results (default setting). This looks much much better than a single column view and there is little to no page scrolling required now. To switch to a three column view simply use the keyboard shortcut “Alt + 3”. To return to a single column view use “Alt + 1” and for the default two column view use “Alt + 2”. Three keyboard shortcuts for three different views…definitely a good thing. Note: On our test system we needed to use the number keys at the top of our keyboard to switch views…this is most likely the result of unique settings on our test system. Conclusion If you are wanting a better viewing experience when conducting searches at Google then this user script will make a very nice addition to your favorite browser. For those using Firefox you can add user scripts with the Greasemonkey & Stylish extensions. Using Opera Browser? See our how-to for adding user scripts to Opera here. Links Install the Multi-Column View of Google Search Results User Script Similar Articles Productive Geek Tips Hide Flash Animations in Google ChromeEnable Google Search From Shortcut Key in KDE on (k)UbuntuSet Gmail as Default Mail Client in UbuntuSet Up User Scripts in Opera BrowserHow To Enable Favicons for Google Reader Subscriptions TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu

Read the article

Silverlight Cream for January 04, 2011 -- #1022

- by Dave Campbell

In this Issue: Dennis Doomen, Doug Holland, Kunal Chowdhury, Sacha Barber, Paul Sheriff, Mike Snow(-2-), Peter Kuhn(-2-), and Mike Ormond. Above the Fold: Silverlight: "Silverlight: Fixing the BookShelf Sample" Peter Kuhn WP7: "Searching the Windows Phone 7 Marketplace Programmatically" Doug Holland Prism/Cinch: "PRISM 4 Custom Transitioning Region" Sacha Barber Shoutouts: Sacha Barber the author of Cinch asks for some advice from users: Cinch V2 : Question For The Reader Michael Crump introduces us to SnippetManager as a way to organize your Silverlight snippets... I'm thinking any snippet: A better way to organize your Silverlight Code Snippets. Andy Beaulieu announced an update of Physics Helper 4.2 using Farseer 3.2 ... check out the breaking changes though! Dennis Doomen blogged about a new release of his Fluent Assertions: A new year with a new release of Fluent Assertions, with a blog post about it below From SilverlightCream.com: Verifying PropertyChanged events in Silverlight using Fluent Assertions Dennis Doomen release his latest Fluent Assertions for .NET and Silverlight and wrote up a big post about the new event monitoring syntax. Searching the Windows Phone 7 Marketplace Programmatically Doug Holland has a post up on MSDN blogs talking about searching the WP7 Marketplace programmatically... ya know you should be able to do it... here's how. Beginners Guide to Visual Studio LightSwitch (Part - 5) Kunal Chowdhury has Part 5 of a tutorial series on Lightswitch up at SilverlightShow... working with custom validation this time, and for the first time in this series so far actually writes some code! PRISM 4 Custom Transitioning Region Sacha Barber took time to look at Prism4/MEF and Cinch2 and found things to be fine then wrote a custom PRISM region adaptor that uses a TransitionalElement from the Microsoft Transitionals project... code available, blog post to come. Get Application Title from Windows Phone Paul Sheriff has a cool chunk of code up... getting the Application's title programmatically... and other attributes as well, if you were wondering why you might wanna do that. Detecting Users Win7 Mobile Theme Color Mike Snow has a couple as well... first up is how to detect your user's theme... obviously useful if you wanna match it. Selecting an Item in a ComboBox after Adding Items Second for Mike Snow is a general Silverlight issue... setting the selected item on a ComboBox after filling it... if you haven't stumbled across this yet, you will... A Simplified Grid Markup Reloaded Peter Kuhn has a pair of posts up since last time... this first is an extension of Colin Eberhardt's simplified Grid markup system, but it's only useful if you don't plan on using Blend... can we get a show of hands? :) Silverlight: Fixing the BookShelf Sample Next Peter Kuhn has some changes to the Bookshelf code, but more importantly has some excelling tips about shader effects, Effects on Visual Elements and how to make best use of all the above. Displaying HTML Content in Windows Phone 7 Mike Ormond has a WP7 post up describing problems a customer had early on displaying rich text and an attempt to use the WebBrowser control to pull it off and the problems that caused... check out the resultant code, and read the comments as well. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Migrating SQL Server Compact Edition (SQL CE) database to SQL Server using Web Matrix

- by Harish Ranganathan

One of the things that is keeping us busy is the Web Camps we are delivering across 5 cities. If you are a reader of this blog, and also attended one of these web camps, there is a good chance that you have seen me since I was there in all the places, so far. The topics that we cover include Visual Studio 2010 SP1, SQL CE, ASP.NET MVC & HTML5. Whenever I talk about SQL CE, the immediate response is that, people are wow that Microsoft has shipped a FREE compact edition database, which is an embedded database that can be x-copy deployed. If you think, well didn’t Microsoft ship SQL Express which is FREE? The difference is that, SQL Express runs as a service in the machine (if you open SQL Configuration Manager, you can notice that SQL Express is running as a service along with your SQL Server Engine (if you have installed ). This makes it that, even if you are willing to use SQL Express when you deploy your application, it needs to be installed on the production machine (hosting provider) and it needs to run as a service. Many hosters don’t allow such services to run on their space. SQL CE comes as a x-Copy deploy-able database with just a few DLLs required to run it on the machine and they don’t even need to be installed in GAC on the production machine. In fact, if you have Visual Studio 2010 SP1 installed, you can use the “Add Deployable Dependencies” option in Project-Properties and it would detect that SQL CE is something you would probably want to add as a deploy-able dependency for your project. With that, it bundles the required DLLs as a part of the “_bin_deployableAssemblies” folder. So your project can be x-Copy deployed and just works fine. However, SQL CE has the limit of 4GB storage space. Real world applications often require more than just 4GB of data storage and it often turns out that people would like to use SQL CE for development/ramp up stages but would like to migrate to full fledged SQL Server after a while. So, its only natural that the question arises “How do I move my SQL CE database to SQL Server” And honestly, it doesn’t come across as a straight forward support. I was talking to Ambrish Mishra (PM in SQL CE Team, Hyderabad) since I got this question in almost all the places where we talked about SQL CE. He was kind enough to demonstrate how this can be accomplished using Web Matrix. Open Web Matrix (Web Matrix can be installed for free from www.microsoft.com/web) and click on “Site from Template” Click on the “Bakery” template (since by default it uses a SQL CE database and has all the required sample data) and click “Ok”. In the project, you can navigate to the Database tab and will be able to find that the Bakery site uses a SQL CE database “bakery.sdf” Select the “bakery.sdf” and you will be able to see the “Migrate” button on the top right Once you click on the “Migrate” button, you will notice that the popup wizard opens up and by default is configured for SQL Express. You can edit the same to point to your local SQL Server instance, or a remote server. Upon filling in the Server Name, Username and Password, when you click “Ok”, couple of things happen. 1. The database is migrated to SQL Server (local or remote – subject to permissions on remote server). You can open up SQL Server Management Studio and connect to the server to verify that the “bakery” database exists under “Databases” node. 2. You can also notice that in Web Matrix, when you navigate to the “Files” tab and open up the web.config file, connection string now points to the SQL Server instance (yes, the Migrate button was smart enough to make this change too ) And there it is, your SQL Server Compact Edition database, now migrated to SQL Server!! In a future post, I would explain the steps involved when using Visual Studio. Cheers !!!

Read the article

Prepping the Raspberry Pi for Java Excellence (part 1)

- by HecklerMark

I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing. I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks: Load an OS onto an SD card Get the Pi connected to the network Load a JDK I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly. There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac): Plug SD card into reader on/in Mac Format it (FAT32) Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card) Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m) Eject the card from the Mac (diskutil eject diskn) There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi. Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one! Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least for my combination of Pi version, OS version, and uncanny gift of timing and luck there was. :-) Here is the sequence of steps I used to make the magic happen: Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity) Boot your Pi. On the first boot, do the following things: Opt to have it use all space on the SD card (will require a reboot eventually) Disable overscan Set your timezone Enable the ssh server Update raspi-config Reboot your Pi. This will reconfigure the SD to use all space (see above). After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved. ;-) With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration. To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself! I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time! All the best, Mark

Read the article

Silverlight Cream for June 16, 2011 -- #1108

- by Dave Campbell

In this Issue: René Schulte, Rajat Jaiswal(-2-), Peter Kuhn, Colin Eberhardt, Kunal Chowdhury(-2-), Beth Massi, Michael Crump, Daniel Vaughan, Chris Rouw, WindowsPhoneGeek, and Jesse Liberty. Above the Fold: Silverlight: "Cubelicious - Silverlight 5 + Balder + Physics + SLARToolkit Augmented Reality = Triple Win!" René Schulte WP7: "Binding the WP7 ProgressIndicator in XAML" Daniel Vaughan LightSwitch: "Adding Static Images and Text on a LightSwitch Screen" Beth Massi Shoutouts: Laurent Bugnion is Proposing a new RelayCommand snippet for MVVM Light V4... read about it and give him some feedback From SilverlightCream.com: Cubelicious - Silverlight 5 + Balder + Physics + SLARToolkit Augmented Reality = Triple Win! René Schulte has a post up about using the SLARToolkit for Silverlight 5 Beta in conjuncion with Balder and Physics ... dang this is cool, check out the video! PSD TO XAML in few easy steps using Expression Blend I'm not a Photoshop person, but apparently Rajat Jaiswal is, and he's demonstrating using Expression Blend to get your PSD file into XAML Its really great feature Silverlight realtime augment toolkit This is a fun post from Rajat Jaiswal... fun to see someone other than René Schulteposting about René's SLARToolkit :) Getting ready for the Windows Phone 7 Exam 70-599 (Part 2) Peter Kuhn has part 2 of his series up on getting ready for the Windows Phone 7 Exam at SilverlightShow Metro In Motion Part #7 – Panorama Prettiness and Opacity Colin Eberhardt has another Metro in Motion up... this one concentrates on the opacity effect when the user slides from item-to-item in Panorama contents Windows Phone 7 (Mango) Tutorial - 13 - What is Tombstoning? Kunal Chowdhury has a couple of posts up... first up is this one on Tombstoning... and if you're just starting with WP7.1, it got easier Windows Phone 7 Tip: Showing and Hiding onscreen keyboard in Emulator Kunal Chowdhury's latest is a great hint if you haven't found it already... how to show/hide the onscreen keyboard in the emulator Adding Static Images and Text on a LightSwitch Screen Beth Massi's latest post is on showing how to display an image or static text such as a logo in a LightSwitch app Displaying PDF Files in Windows Phone 7 Mango Michael Crump responds to reader's questions about displaying a PDF file in WP7.1 with this post using ComponentOne's Studio for Windows Phone CTP Binding the WP7 ProgressIndicator in XAML Daniel Vaughan has a solution to the problem of having to bind the ProgressIndicator in WP7.1 in code-behind... he wrote a ProgressIndicatorProxy and shares it with us!<>/dd> Storing Files in SQL Server using WCF RIA Services and Silverlight – Part 2 Chris Rouw has Part 2 of his Storing Files in SQL Servier using WCF RIA Services and Silverlight up... this one is on uploading and saving files to the database from Silvelright by the user dropping them onto your app. Using SqlMetal to generate Windows Phone Mango Local Database classes OK I'm not too proud to admit I'd never heard of SQLMetal... if you haven't, or even if you have, this post by WindowsPhoneGeek is a good discussion of using it to generate your WP7.1 database classes. Obtaining Email, Address or Phone Number Jesse Liberty's latest is another in his 'Mango From Scratch' series discussing the new tasks to obtain more info from the contact list. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Silverlight Cream for March 10, 2011 -- #1058

- by Dave Campbell

In this Issue: Ian T. Lackey, Peter Kuhn, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), Martin Krüger, John Papa, Jeremy Likness, Karl Shifflett, and Colin Eberhardt. Above the Fold: Silverlight: "Silverlight TV 65: 3D Graphics" John Papa WP7: "Developing a Windows Phone 7 Jump List Control" Colin Eberhardt Shoutouts: Telerik announced a special sale on their RadControls for WP7... check it out: RadControls for Windows Phone 7 - on Sale from March 16th at a Special Promo Price! From SilverlightCream.com: Prism BootStrapper Load ModuleCatalog Ansyc Ian T. Lackey has a post up about reading the module catalog for Prism from an XML file asynchronously... fun stuff... this is how we kick-started our app... XNA for Silverlight developers: Part 6 - Input (accelerometer) Peter Kuhn has Part 6 of his XNA for Silverlight devs up at SilverlightShow. This post is on the use of the accelerometer... some great diagrams and explanations of it's use along with some code to play with... including a 'problems and pitfalls' section, and some good external links. Getting Started with Unit Testing in Silverlight for WP7 WindowsPhoneGeek has an introduction to Unit Testing in general, and then moves into Unit Testing in Silverlight for WP7, providing 3 options with links to the materials and code demonstrating the concepts. Using DockPanel in WP7 Responding to reader's questions, WindowsPhoneGeek's next post is on the DockPanel from the Silverlight Toolkit, and using it in WP7... defined declaratively and in code. Reactive Extensions–More About Chaining Jesse Liberty has post number 10 on Rx up and is a follow-on to the last one on Chaining. This time he exercises the chaining aspect of SelectMany. Yet Another Podcast #26–Walt Ritscher In his next post, Jesse Liberty has his 26th 'Yet Another Podcast' up and is chatting with my friend Walt Ritscher. If you don't know who Walt is, check out the links Jesse has on the post... I'm sure you've crossed paths. How to: Create A half square from a regular polygon (triangle) Martin Krüger demonstrates the exact placement of a half-square (isosceles right triangle), formed with a regular polygon in Blend... this is much more involved than I've made it sound... check out his post. Silverlight TV 65: 3D Graphics John Papa has Silverlight TV number 65 up and it's all about the 3D graphics stuff we saw at the Firestarter. John is talking with Danny Riddel, the CEO of Archetype, the company that built the awesome 3D demo we all gushed over. Jounce Part 12: Providing History-Based Back Navigation Jeremy Likness has part 12 of his Jounce exploration up... and discussing the stack of navigated pages that Jounce retains and providing a 'go back' functionality... and provides a good example of using it all. Prism 4 Region Navigation with Silverlight Frame Navigation and Unity Karl Shifflett has a post for all us Prism afficianados... Prism, Unity, and the Silverlight Frame Navigation framework. Some great external links for 'required reading' too. Developing a Windows Phone 7 Jump List Control Colin Eberhardt has an awesome tutorial up for creating a JumpList control for WP7... what a bunch of effort... this is a step-by-step description of designing the control he built and blogged about a while back... and it's still cool! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Agile Manifesto, Revisited

- by GeekAgilistMercenary

Again, conversations give me a zillion things to write about. The recent conversation that has cropped up again is my various viewpoints of the Agile Manifesto. Not all the processes that came after the manifesto was written, but just the core manifesto itself. Just for context, here is the manifesto in all the glory. We are uncovering better ways of developing software by doing it and helping others do it. Through this work we have come to value: Individuals and interactions over processes and tools Working software over comprehensive documentation Customer collaboration over contract negotiation Responding to change over following a plan That is, while there is value in the items on the right, we value the items on the left more. Several of the key signatories at the time went on to write some of the core books that really gave Agile Software Development traction. If you check out the Agile Manifesto Site and do a search for any of those people, you will find a treasure trove of software development information. My 2 Cents First off, I agree with a few people out there. Agile is not Scrum for instance. Do NOT get these things confused when checking out Agile, or pushing forward with Scrum. As David Starr points out in his blog entry, "About 35 minutes into this discussion, I realized I hadn?t heard a question or comment that wasn?t related to Scrum. I asked the room, ?How many people are on an agile team that is NOT using Scrum?? 5 hands. Seriously, out of about 150 people of so. 5 hands." So know, as this is one of my biggest pet peves these days, that Scrum is not Agile. Another quote David writes, "I assure you, dear reader, 2 week time boxes does not an agile team make." This is the exact problem. Take a look at the actual manifesto above. First ideal, "Individuals and interactions over processes and tools". There are a couple of meanings in this ideal, just as there are in the other written ideals. But this one has a lot of contention with a set practice such as Scrum. There are other formulas, namely XP (eXtreme) and Kanban are two that come to mind often. But none of these are Agile, but instead a process based on the ideals of Agile. Some of you may be thinking, "that?s the same thing". Well, no, it is not. This type of differentiation is vitally important. Agile is a set of ideals. Processes are nice, but they can change, they may work for some and not others. The Agile Manifesto covers the ideals behind what is intended, that intention being to learn and find new ways to build better software. Ideals, not processes. Definition versus implementation. Class versus object. The ideals are of utmost importance, the processes are secondary, the first ideal is what really lays this out for me "Individuals and interactions over processes and tools". Yes, we need tools but we need the individuals and their interactions more. For those coming into a development team, I hope you take this to mind. It is of utmost importance that this differentiation is known and fought for. The second the process becomes more important than the individuals and interactions, the team will effectively lose the advantages of Agile Ideals. This is just one of my first thoughts on the topic of Agile. I will be writing more in the near future about each of the ideals. I will make a point to outline more of my thoughts, my opinions, and experience with the ideals of Agile and the various processes that are out there. Maybe, I may stumble upon something new with the help of my readers? It would be a grand overture to the ideals I hold. For the original entry, check out my personal blog with other juicy tech tidbits, rants, raves, and the like. Agilist Mercenary

Read the article

SQL SERVER – OVER clause with FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 – ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING

- by pinaldave

Yesterday I had discussed two analytical functions FIRST_VALUE and LAST_VALUE. After reading the blog post I received very interesting question. “Don’t you think there is bug in your first example where FIRST_VALUE is remain same but the LAST_VALUE is changing every line. I think the LAST_VALUE should be the highest value in the windows or set of result.” I find this question very interesting because this is very commonly made mistake. No there is no bug in the code. I think what we need is a bit more explanation. Let me attempt that first. Before you do that I suggest you read yesterday’s blog post as this question is related to that blog post. Now let’s have fun following query: USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: As per the reader’s question the value of the LAST_VALUE function should be always 114 and not increasing as the rows are increased. Let me re-write the above code once again with bit extra T-SQL Syntax. Please pay special attention to the ROW clause which I have added in the above syntax. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now once again check the result of the above query. The result of both the query is same because in OVER clause the default ROWS selection is always UNBOUNDED PRECEDING AND CURRENT ROW. If you want the maximum value of the windows with OVER clause you need to change the syntax to UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING for ROW clause. Now run following query and pay special attention to ROW clause again. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query which is what questioner was asking. So in simple word, there is no bug but there is additional syntax needed to add to get your desired answer. The same logic also applies to PARTITION BY clause when used. Here is quick example of how we can further partition the query by SalesOrderDetailID with this new functions. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us windowed resultset on SalesOrderDetailsID as well give us FIRST and LAST value for the windowed resultset. There are lots to discuss for this two functions and we have just explored tip of the iceberg. In future post I will discover it further deep. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Oracle Announces Leading ISV Integration With Oracle Sales and Marketing Cloud Service

- by Richard Lefebvre

More Than 100 ISVs, including Big Machines, Marketo and Xactly, now Provide Integrated Offerings to Help Maximize Sales and Single Customer Viewpoint Demonstrating its continued commitment to business value via open standards and the cloud, Oracle today announced that more than 100 leading ISVs are integrating in the cloud with Oracle Sales and Marketing Cloud Service, a service available through Oracle Cloud. For the first time Oracle Sales and Marketing Cloud Service users can choose from a wide array of directly integrated third-party solutions, providing a new level of choice, seamless deployment and single view of customers with preferred implementations. Top partners, including ActivePrime, Avaya, BigMachines, Box, Brainshark, Callidus Software, CirrusPath, Clicktools, CRMIT, DBSync, EchoSign from Adobe, Eloqua, Fliptop, FPX, HarQen, HubSpot, iHance, InsideSales.com, InsideView, Interactive Intelligence, Lingotek, LinkPoint360, Marketo, Nuance, PerspecSys, Postcode Anywhere, Revegy, salesElement, StrikeIron, upsourceIT, White Springs, X+1 and Xactly, have announced their availability and integration today. By integrating with Oracle Sales and Marketing Cloud Service, ISV solutions can easily be leveraged by customersBy choosing Oracle Sales and Marketing Cloud Service as a sales platform, customers will continue to have complete choice of their own quoting, lead management and sales methodology solutions and it will all be pre-integrated with Oracle Sales and Marketing Cloud Service. With demonstrable integration fusing standards-based technologies, such as SOAP web services, Oracle Sales and Marketing Cloud Service customers choosing ISV integrations will also benefit from familiar ease-of-use and the Oracle Sales and Marketing Cloud ervice user interface, including buttons, links and custom objects for a rich user experience. ISV integration with Oracle Sales and Marketing Cloud Service also enables on-demand contextual data exchange capabilities, linking Oracle Sales and Marketing Cloud Service business data with third-party application data for a complete CRM view. ISVs building robust, repeatable integrations with Oracle Sales and Marketing Cloud Service can begin the process of achieving Oracle Validated Integration, an Oracle PartnerNetwork program that recognizes Oracle partner solutions with proven integration to Oracle Applications. ISVs can learn more about Oracle Validated Integration here. For customers, Oracle Validated Integration means that a partner’s integration has been tested and validated as functionally and technically sound, that the partner solution is integrated with Oracle Sales and Marketing Cloud Service in a reliable, standardized way, and that the integration operates and performs as documented. Oracle Cloud provides a broad portfolio of Platform Services, Application Services, and Social Services, all on a subscription basis. Oracle Cloud delivers instant value and productivity for end users, administrators, and developers through functionally rich, integrated, secure, enterprise cloud services. Supporting Quotes “BigMachines is a leader in Configure, Price, and Quote solutions in the Cloud. Our solution delivers accurate quotes directly from an opportunity, integrated with the leading Oracle Sales and Marketing Cloud application from Oracle,” says John Pulling, Senior Vice President of Products at Big Machines. “Together, Big Machines and Oracle efficiently automate changes, enabling a faster, more efficient sales process for our joint customers.” ”Modern marketing and sales must engage customers and prospects in real time across the web, email, social media, online and offline channels to understand where and how to allocate their budgets for maximum return,” said Srini Venkatesan, Senior VP, Products and Engineering at Marketo. “Alignment and integration with Oracle Sales and Marketing Cloud Service allows Marketo’s solutions to deliver innovative capabilities for sales and marketing to adapt and grow their business on the core Oracle platform for CRM.” “Sales incentives are the best way to drive better performance. Well managed incentives improve the bottom line, particularly when combined with effective sales systems,” said Christopher Cabrera, president and CEO of Xactly Corporation. “With Oracle Sales and Marketing Cloud Service and Xactly working together, customers gain insight and efficiencies. The combination can create more effective compensation programs, while motivating sales to work to its full potential." “The tremendous integration of leading ISVs with Oracle Sales and Marketing Cloud Service is a testament to the undeniable business value and demand from customers,” said Anthony Lye, SVP of Oracle CRM. “Oracle Sales and Marketing Cloud Service continues to define the industry, and we are proud to work with these leading ISVs to help users simultaneously maximize sales and revenue and extend their current deployments for a deeper and single customer viewpoint.” Supporting Resources Oracle Sales and Marketing Cloud Service Learn More About Oracle Cloud

Read the article

Surface V2.0

- by Dennis Vroegop

It’s been quiet around here. And the reason for that is that it’s been quiet around Surface for a while. Now, a lot of people assume that when a product team isn’t making too much noise that must mean they stopped working on their product. Remember the PDC keynote in 2010? Just because they didn’t mention WPF there a lot of people had the idea that WPF was dead and abandoned for Silverlight. Of course, this couldn’t be farther from the truth. The same applies to Surface. While we didn’t hear much from the team in Redmond they were busy putting together the next version of the platform. And at the CES in January the world saw what they have been up to all along: Surface V2.0 as it’s commonly known. Of course, the product is still in development. It’s not here yet, we can’t buy one yet. However, more and more information comes available and I think this is a good time to share with you what it’s all about! The biggest change from an organizational point of view is that Microsoft decided to stop producing the hardware themselves. Instead, they have formed a partnership with Samsung who will manufacture the devices. This means that you as a buyer get the benefits of a large, worldwide supplier with all the services they can offer. Not that Microsoft didn’t do that before but since Surface wasn’t a ‘big’ product it was sometimes hard to get to the right people. The new device is officially called the “Samsung SUR 40 for Microsoft Surface” which is quite a mouthful. The software that runs the device is of course still coming from Microsoft. Let’s dive into the technical specs (note: all of this is preliminary, it’s still in the Alpha phase!): Audio out HDMI / StereoRCA / SPDIF / 2 times 3.5mm audio out jack Brightness 300 CD/m2 Communications 1GB Ethernet/802.11/Bluetooth Contrast Ratio 1:1000 CPU AMD Athlon X2 245e 2.9Ghz Dual Core Display Resolution Full HD 1080p 1920x1080 / 16:9 aspect ratio GPU AMD Radeon HD 6750 1GB GDDRS HDD 320 GB / 7200 RPM HDMI In / HDMI out Yes I/O Ports 4 USB, SD Card reader Operation System Embedded Windows 7 Professional 64 bits Panel Size 40” diagonal Protection Glass Gorilla Glass RAM 4 GB DD3 Weight / with standard legs 70.0 Kg / 154 lbs Weight / standalone 39.5 Kg / 87 lbs Height (without legs) 4 inch Contact points recognized > 50 Cool Factor Extremely Ok, the last point is not official, but I do think it needs to be there. Let’s talk software. As noted, it runs Windows 7 Professional 64 bit, which means you can run Visual Studio 2010 on it. The software is going to be developed in WPF4.0 with the additional Surface SDK 2.0. It will contain all the things you’ve seen before plus some extra’s. They have taken some steps to align it more with the Surface Toolkit which you can download today, so if you do things right your software should be portable between a WPF4.0 Windows 7 Multi-touch app and the Surface v2 environment. It still uses infrared to detect contacts, so in that respect nothing much has changed conceptually. We still can differentiate between a finger, a tag or a blob. Of course, since the new platform has a much higher resolution (compared to the 1024x768 of the first version) you might need to look at your code again. I’ve seen a lot of applications on Surface that assume the old resolution and moving that to V2 is going to be some work. To be honest: as I am under NDA I cannot disclose much about the new software besides what I have told you here, but trust me: it’s going to blow people away. Now, the biggest question for me is: when can I get one? Until we can, have a look here: Tags van Technorati: surface,samsung,WPF

Read the article

What packages do I need to compile .tex documents using XeLaTeX?

- by maria

Hi I'm aware of the existence of similar threads on this forum. But any of replies mach to my problem. I'm using Ubuntu 10.4 and I hadn't problems with fonts till I've decided to use XeLaTeX instead of LaTeX (cf http://tex.stackexchange.com/questions/12347/typesetting-a-document-using-arabic-script/12358#12358). The problem is that I'm not able to compile any .tex document using XeLaTeX, as well as properly display XeLaTeX documentation. As I've learn thanks to mentioned thread, XeLaTeX uses the fonts availables in general in the system. I was trying yo read fontspec documentation, but it opens in pdf with a lot of white gaps and terminal output (quite long) consist mostly of errors. This are just few lines of it: Error: Missing language pack for 'Adobe-Japan1' mapping Error: Unknown font tag 'F5.1' Error (24124): No font in show Error: Unknown font tag 'F5.1' I was trying to compile simple XeLaTeX file: \documentclass{article} \usepackage{fontspec} \setmainfont{Linux Libertine O} \begin{document} Hello World! \end{document} without succes. This is terminal output of compilation: This is XeTeX, Version 3.1415926-2.2-0.9995.2 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./ex.tex LaTeX2e <2009/09/24> Babel <v3.8l> and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, polish, loaded. (/usr/share/texmf-texlive/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (/usr/share/texmf-texlive/tex/latex/base/size10.clo)) (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.sty (/usr/share/texmf-texlive/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texmf-texlive/tex/latex/tools/calc.sty) (/usr/share/texmf-texlive/tex/latex/xkeyval/xkeyval.sty (/usr/share/texmf-texlive/tex/generic/xkeyval/xkeyval.tex (/usr/share/texmf-texlive/tex/generic/xkeyval/keyval.tex))) (/usr/share/texmf-texlive/tex/latex/base/fontenc.sty (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1enc.def) (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1lmr.fd)) fontspec.cfg loaded. (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.cfg))kpathsea: Invalid fontname `Linux Libertine O', contains ' ' ! Font \zf@basefont="Linux Libertine O" at 10.0pt not loadable: Metric (TFM) fi le or installed font not found. \zf@fontspec ...ntname \zf@suffix " at \f@size pt \unless \ifzf@icu \zf@set@... l.3 \setmainfont{Linux Libertine O} ? I can't find Linux Libertine O. Searching for otf- by aptitude gives as result: maria@maria-laptop:/etc/fonts$ aptitude search otf p emdebian-rootfs - emdebian root filesystem support p libotf-bin - A Library for handling OpenType Font - utilities p libotf-dev - A Library for handling OpenType Font - development i libotf0 - A Library for handling OpenType Font - runtime p libotf0-dbg - The libotf libraries and debugging symbols p libpam-dotfile - A PAM module which allows users to have more than one password p livecd-rootfs - construction script for the livecd rootfs p makebootfat - Utility to create a bootable FAT filesystem p otf-ipaexfont - Japanese OpenType font, IPAexFont (IPAexGothic/Mincho) p otf-ipaexfont-gothic - Japanese OpenType font, IPAexFont (IPAexGothic) p otf-ipaexfont-mincho - Japanese OpenType font, IPAexFont (IPAexMincho) p otf-ipafont - Japanese OpenType font set, IPAfont p otf-ipafont-gothic - Japanese OpenType font set, IPA Gothic font p otf-ipafont-mincho - Japanese OpenType font set, IPA Mincho font p otf-stix - the Scientific and Technical Information eXchange fonts p otf-thai-tlwg - Thai fonts in OpenType format p otf-yozvox-yozfont - Japanese proportional Handwriting OpenType font p otf2bdf - generate BDF bitmap fonts from OpenType outline fonts p robotfindskitten - Zen Simulation of robot finding kitten So font in question is not just uninstalled, but not available, if I'm not wrong. Does it mean that I lack some repositoires? I was trying also to apply solution from the thread How do I reinstall default fonts?, but the result is: maria@maria-laptop:~$ sudo apt-get install msttcorefonts [sudo] password for maria: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting ttf-mscorefonts-installer instead of msttcorefonts ttf-mscorefonts-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. maria@maria-laptop:~$ It seems that is not a usual problem for use of XeLaTeX; nobody in the mentioned thread suggested instalation of anything else than TeX Live. Thanks in advance

Read the article

Silverlight Cream for February 21, 2011 -- #1049

- by Dave Campbell

In this Issue: Rob Eisenberg(-2-), Gill Cleeren, Colin Eberhardt, Alex van Beek, Ishai Hachlili, Ollie Riches, Kevin Dockx, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), and John Papa. Above the Fold: Silverlight: "Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4" Alex van Beek WP7: "Google Sky on Windows Phone 7" Colin Eberhardt Shoutouts: My friends at SilverlightShow have their top 5 for last week posted: SilverlightShow for Feb 14 - 20, 2011 From SilverlightCream.com: Rob Eisenberg MVVMs Us with Caliburn.Micro! Rob Eisenberg chats with Carl and Richard on .NET Rocks episode 638 about Caliburn.Micro which takes Convention-over-Configuration further, utilizing naming conventions to handle a large number of data binding, validation and other action-based characteristics in your app. Two Caliburn Releases in One Day! Rob Eisenberg also announced that release candidates for both Caliburn 2.0 and Caliburn.Micro 1.0 are now available. Check out the docs and get the bits. Getting ready for Microsoft Silverlight Exam 70-506 (Part 6) Gill Cleeren has Part 6 of his series on getting ready for the Silverlight Exam up at SilverlightShow.... this time out, Gill is discussing app startup, localization, and using resource dictionaries, just to name a few things. Google Sky on Windows Phone 7 Colin Eberhardt has a very cool WP7 app described where he's using Google Sky as the tile source for Bing Maps, and then has a list of 110 Messier Objects.. interesting astronomical objects that you can look at... all with source! Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4 Alex van Beek has some Prism4/Unity MVVM goodness up with this discussion of a login module using View and ViewModel base classes. Windows Phone 7 and WCF REST – Authentication Solutions Ishai Hachlili sent me this link to his post about WCF REST web service and authentication for WP7, and he offers up 2 solutions... from the looks of this, I'm also putting his blog on my watch list WP7Contrib: Isolated Storage Cache Provider Ollie Riches has a complete explanation and code example of using the IsolatedStorageCacheProvider in their WP7Contrib library. Using a ChannelFactory in Silverlight, part two: binary cows & new-born calves Kevin Dockx follows-up his post on Channel Factories with this part 2, expanding the knowledge-base into usin parameters and custom binding with binary encoding, both from reader suggestions. All about UriMapping in WP7 WindowsPhoneGeek has a post up about URI mappings in WP7 ... what it is, how to enable it in code behind or XAML, then using it either with a hyperlink button or via the NavigationService class... all with code. Passing WP7 Memory Consumption requirements with the Coding4Fun MemoryCounter tool WindowsPhoneGeek's latest is a tutorial on the use of the Memory Counter control from the Coding4Fun toolkit and WP7 Memory consumption. Getting Started With Linq Jesse Liberty gets into LINQ in his Episode 33 of his WP7 'From Scratch' series... looks like a good LINQ starting point, and he's going to be doing a series on it. Linq with Objects In his second post on LINQ, Jesse Liberty is looking at creating a Linq query against a collection of objects... always good stuff, Jesse! Silverlight TV Silverlight TV 62: The Silverlight 5 Triad Unplugged John Papa is joined by Sam George, Larry Olson, and Vijay Devetha (the Silverlight Triad) on this Silverlight TV episode 62 to discuss how the team works together, and hey... they're hiring! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Integrated webcam in lenovo t410 not working with 12.04

- by kristianp

I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

Read the article

Get Pop Up Notifications for Your RSS Feeds with Feed Notifier

- by DigitalGeekery

Are you looking for a way to get updates from your favorite websites right to your desktop? If so, you’ll want to check out Feed Notifier. This free Windows application runs in the system tray and delivers pop-up notifications to your desktop when your subscribed RSS feeds are updated. Download and install Feed Notifier. (Download link below) When you are finished installing, the Feed Notifier Preferences window will open. Click on the Add… button to add an RSS feed. Copy and paste the Feed URL into the text box and click Next. Choose your polling interval. This is how often your feed will be checked for new items. You can set your polling interval for days, hours, minutes, or even seconds. Click FInish. At your configured interval, Feed Notifier will check your feeds for new items. If new items are present, they will pop up above your system tray. You’ll get an intro portion of the article. Simply Click the headline in the feed pop up… …to open the full article in your default browser. Setting Preferences Open the preferences of Feed Notifier, by going to Start > All Programs > Feed Notifier, or right clicking on the system tray icon and selecting Preferences. On the Pop-ups tab you can configure the duration in seconds that each article stays displayed on your screen. The default is five seconds. You can also change the size of the display, the theme, and the amount of content displayed. The Options tab offers additional configurations like article caching and using a proxy server. Filter tab allows you to filter in or out certain content. To add a filter click Add… … then type in the filter rule. You can even choose to apply it to only certain feeds. Click OK. Feed Notifier will display on the filters tab the number of times the filter is applied. Click OK when finished. You can scroll though the articles by using the forward and back buttons at the lower left, or use the play / pause buttons to move though the articles in a slideshow-type fashion. Feed Notifier is nice way to get your updated feeds directly to your desktop in a timely fashion. It’s supports all RSS and Atom feeds and features a clean look and feel with plenty of customizable options. Download Feed Notifier Similar Articles Productive Geek Tips Make Outlook Stop Using Internet Explorer’s RSS FeedsChange Default Feed Reader in FirefoxView Feedburner Subscriber Numbers Even if FeedCount is Not DisplayedSubscribe to RSS Feeds in Chrome with a Single ClickOrganize your RSS Feeds with FeedDemon TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain

Read the article

What Counts For A DBA: ESP

- by Louis Davidson

Now I don’t want to get religious here, and I’m not going to, but what I’m going to describe in this ‘What Counts for a DBA’ installment sometimes feels like magic. Often I will spend hours thinking about the solution to a design issue or coding problem, working diligently to try to come up with a solution and then finally just give up with the feeling that I’m not even qualified to be a data entry clerk, much less a data architect. At this point I often take a walk (or sometimes a nap), and then it hits me. I realize that I have the answer just sitting in my brain, ready to implement. This phenomenon is not limited to walks either; it can happen almost any time after I stop my obsession about a problem. I call this phenomena ESP (or Extra-Sensory Programming.) Another term for this could be ‘sleeping on it’, and while the idiom tends to mean to let time pass to actively think about a problem, sleeping on a problem also lets you relax and let your brain do the work. I first noticed this back in my college days when I would play video games for hours on end. We would get stuck deep in some dungeon unable to find a way out, playing for days on end until we were beaten down tired. Once we gave up and walked away, the solution would usually be there waiting for one of us before we came back to play the next day. Sometimes it would be in the form of a dream, and sometimes it would just be that the problem was now easy to solve when we started to play again. While it worked great for video games, it never occurred when I studied English Literature for hours on end, or even when I worked for the same sort of frustrating hours attempting to solve a homework problem in Calculus. I believe that the difference was that I was passionate about the video game, and certainly far less so about homework where people used the word “thou” instead of “you” or x to represent a number. This phenomenon occurs somewhat more often in my current work as a professional data programmer, because I am very passionate about SQL and love those aspects of my career choice. Every day that I get to draw a new data model to solve a customer issue, or write a complex SELECT statement to ferret out the answer to a complex data question, is a great day. I hope it is the same for any reader of this blog. But, unfortunately, while the day on a whole is great, a heck of a lot of noise is generated in work life. There are the typical project deadlines, along with the requisite project manager sitting on your shoulders shouting slogans to try to make you to go faster: Add in office politics, and the occasional family issues that permeate the mind, and you lose the ability to think deeply about any problem, not to mention occasionally forgetting your own name. These office realities coupled with a difficult SQL problem staring at you from your widescreen monitor will slowly suck the life force out of your body, making it seem impossible to solve the problem This is when the walk starts; or a nap. Maybe you hide from the madness under your desk like George Costanza hides from Steinbrenner on Seinfeld. Forget about the problem. Free your mind from the insanity of the problem and your surroundings. Then let your training and education deep in your brain take over and see if it will passively do the rest for you. If you don’t end up with a solution, the worst case scenario is that you have a bit of exercise or rest, and you won’t have heard the phrase “better is the enemy of good enough” even once…which certainly will do your brain some good. Once you stop expecting whipping your brain for information, inspiration may just strike and instead of a humdrum solution you find a solution you hadn’t even considered, almost magically. So, my beloved manager, next time you have an urgent deadline and you come across me taking a nap, creep away quietly because I’m working, doing some extra-sensory programming.

Search Results

Search found 4646 results on 186 pages for 'adobe reader'.

Page 158/186 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165 | Next Page >

- by Jason Fitzpatrick

- by pinaldave

- by Laila

- by Matthew Guay

- by DigiMortal

- by anirudha

- by Jeff

- by DigitalGeekery

- by Jason Fitzpatrick

- by Gopinath

- by Asian Angel

- by Dave Campbell

- by Harish Ranganathan

- by HecklerMark

- by Dave Campbell

- by Dave Campbell

- by GeekAgilistMercenary

- by pinaldave

- by Richard Lefebvre

- by Dennis Vroegop

- by maria

- by Dave Campbell

- by kristianp

- by DigitalGeekery

- by Louis Davidson

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165 | Next Page >