Search Results

Search found 9088 results on 364 pages for 'after power failure'.

Page 16/364 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• What power cord does a WD16001032 hard drive use?

  - by llcf

  I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

  Read the article

• USB 3.0 hub; what can it power?

  - by pouzzler

  I own an Asus UX31A laptop, equipped with 2 USB 3.0 ports. I would like to connect several USB devices to one of these ports, using a USB 3.0 hub. 1) Am I correct in assuming the Asus "USB Charger+" commercial blurb corresponds to the USB 3.0 standard "Battery Charging Specification 1.2", and furthermore inferring that the laptop can deliver 1.5A through a USB port? 2) Does a powered external USB 3.0 hard drive draw on the USB power lines? 3) I would like to connect the aforementionned drive, an android phone, and a 200mA rated optical mouse to an unpowered USB 3.0 hub, itself plugged into the laptop. Should my above assumptions be false, would this setup be able to power all three devices? Thanks to the usb guru who'll settle my fears to rest. Best regards, Sébastien

  Read the article

• Using Power Adapter With Slightly Different Rating - Close Enough? [closed]

  - by Ed Liddiard

  Possible Duplicate: Laptop power supplies, does current matter? I'm in Colombia, South America and the power adapter on my HP Pavilion DV4-1125nr laptop died. The adapter is rated at 65W input 1.6A & output 18.5V 3.5A. A friend found me a Dell adapter rated at 65W input 1.5A & output 19.5V 3.34A. Both have center + polarities. Seems very stable and not having unusual heat problems. Do you think it is safe to use this adapter without harming my laptop?

  Read the article

• Power cut during Ubuntu upgrade to 10.04 - boots to command line, apt-get and dpkg do not work.

  - by Macha

  I was upgrading Ubuntu to 10.04, when a tripswitch tripped, cutting power to the computer. When it was restarted, it booted into a command line prompt. Google tells me to try: sudo dpkg --configure -a This gets me a lot of output that ends with a list of packages. I can't tell you what the output is, as piping the output to more/less does not work (still just all scrolls by and moves to next prompt), and redirecting it to a file just results in an empty file. Google also suggested: sudo apt-get install -f This also didn't work. Is a fresh install the only solution at this point?

  Read the article

• Two New AdvancedTCA Blades from Emerson Network Power

  ATCA server blades feature six-core processors from the Intel Xeon processor 5600 series for optimized virtualization and power management Xeon - Hardware - Intel Corporation - Components - Intel Xeon

  Read the article

• IBM Expands Power 7 Line to Entry-Level and Mid-Range Blade Servers

  New processors allow for expandability and improved power efficiency compared to the previous generation.

  Read the article

• New Oracle E-Business Suite R12 OS and Tools Requirements on IBM AIX on Power Systems

  - by John Abraham

  IBM has announced May 1st, 2011 as the end of Support for Version 8 of the IBM XL C/C++ compiler currently used for Release 12 builds and patching. The target date of the switchover -- May 1st 2011 -- corresponds to when this older compiler will no longer be supported by IBM. Beginning on May 1st 2011, Oracle E-Business Suite patches for Release 12 (12.0, 12.1) on the IBM AIX on Power Systems platform will be built with Version 9 of the IBM XL C/C++ compiler.  Customers who plan to patch or upgrade their E-Business Suite R12 environments after May 1st, 2011 must meet all the new requirements prior to applying new patches or upgrades.Please review the documents below for all new requirements pertaining to the new runtime and utilities packages on IBM AIX on Power Systems.

  Read the article

• Control HUA YI Electrnic Power Supply

  This program show you how to control, give set-point and getting feedback from Hua YI made Power Supplies

  Read the article

• cpu usage and near to crash when i plug in the power cable

  - by mohamad

  i have had this problem since i installed ubuntu 12.4 on my laptop (on all of distro i have this problem execpt of backtrack) my problem is when i start my linux while it connect to power source there is no problem everything works fine . but when i disconnect and wants to work with battery it crash i mean everything work tooooo slowly and my cpu usage goes to 100 ... it happen too when i start my linux with battery and want to connect the power source to it .... it happens again . i updated my distro and now on i have 12.10 on my laptop but it has this problem . my lap top is hp probook 4520s my graphic card is ati radeon 530 v and i installed catalyst control center on my lap top and it works fine but the only problem is that what i said ...is it relate to my graphic card ???

  Read the article

• Benchmarking CPU processing power

  - by Federico Zancan

  Provided that many tools for computers benchmarking are available already, I'd like to write my own, starting with processing power measurement. I'd like to write it in C under Linux, but other language alternatives are welcome. I thought starting from floating point operations per second, but it is just a hint. I also thought it'd be correct to keep track of CPU number of cores, RAM amount and the like, to more consistently associate results with CPU architecture. How would you proceed to the task of measuring CPU computing power? And on top of that: I would worry about a properly minimum workload induced by concurrently running services; is it correct to run benchmarking as a standalone (and possibly avulsed from the OS environment) process?

  Read the article

• Understanding how to create/use textures for games when limited by power of two sizes

  - by Matthias Reisner

  I have some questions about the creating graphics for a game. As an example. I want to create a motorbike. (1pixel = 1centimeter) So my motorbike will have 200 width and 150 height. (200x150) But the libgdx only allows to load sizes with the power of 2?! (2,4,8,16,...) First I thought about that way. I will create my bike with the size (200x150) and save it as png. Than I will open it again (e.g. with gimp) resize the image to a size which uses values with power of 2 (128x128). I will load that as texture in the programm and set width as 200 and height as 150. But wouldn't it be a problem? Because I will lose some pixel information when I make the first conversation.?! Isn't it?

  Read the article

• What can I do to prevent system power downs?

  - by Joe King

  Yesterday I was given my brother's old laptop - core i7, 2.67GHz, 8GB RAM, 128GB SSD, Win7 64 bit. It's a Sony Vaio Z11. Approx 18 months old. When running something computationally intensive, the fan starts up and after about 30 secs it just powers itself down with no warning. I guess it is overheating. There is nothing in the event logs to suggest what is causing it - the only thing I see is "the last system shutdown was unexpected" or something similar. This is a problem for me because I use a lot of number crunching apps, which pretty much makes it useless to me. I would like to know if there is anything I can do, other than the obvious things I've done already - open up and clean out dust, re-install the OS. According to my brother, this problem started about 6 months ago when it was already outside warranty. If it's just used for simple things - web browsing, word processing etc, the problem does not occur. Any ideas for what I can do to fix this ? Update: I found that the laptop has 2 hardware settings for graphics: Speed and Stamina - the Speed setting seems to use an nvidia GEforce GT 330M, while the Stamina setting uses an Intel chipset. With the setting on Speed, I can hear the fan the whole time, and the system powers down after a short while (5-10 mins) even just doing basic tasks (browsing this site for example), but doesn't shut down if I just leave it switched on. In this mode it also sometimes just freezes the screen and I have to power off myself. However on Stamina setting it only powers down when doing number crunching and never freezes the screen.

  Read the article

• Can't boot after power failure - 14.04 - GRUB even doesn't showup

  - by Nateowami

  Packages were updating when somehow the power failed (battery fully charged and power got disconnected). Now it won't boot. It doesn't even get as far as GRUB. The bios says it can't boot and press any key to retry. Fortunately all data is backed up and I can boot a live SD. Now what do I do? Model: Dell Latitude D630 Dual-boots with Windows 7, but since GRUB doesn't show up that's not bootable either. Thanks in advance for any help!

  Read the article

• Lenovo u400, Ubuntu 12.04. Sudden reboots / power down

  - by Victor Neo

  I've recently bought a Lenovo u400 (http://www.lenovo.com/products/us/laptop/ideapad/u-series/u400/) and installed Ubuntu 12.04 on it. Everything works fine (I've installed the proprietary ATI drivers for switchable graphics) except that I get a random power down or reboot either while surfing the web or watching videos. Monitoring the temperature with sensors, the laptop never goes into any critical zone but still may power down or reboot once in a while. Is there any logs that I should check and any particular message I should take note of? EDIT: This happens to me as well. This also happens without proprietary drivers activated.

  Read the article

• Unleash the Power of JavaFX

  - by Angela Caicedo

  It seems that it was just yesterday that we were getting ready for JavaOne 2012.  Now it's over, but it's definitely a great time to go back and watch the sessions you missed, and learn some of the latest news about Java.   For this JavaOne, I presented two sessions and one HOL, all of them related to JavaFX: JavaFX Extreme GUI Makeover Building JavaFX Interfaces with the Real World Unleash the power of JavaFX If you couldn't join us for these sessions, just follow the links and you can watch the videos on demand. For the HOL I've created a repository at GitHub, as many of the attendees wanted to keep the material.   In this repository you can find the lab document, the NetBeans projects for each exercise and it's appropriate solution.  Hope you enjoy! I created and presented a HOL called:  Unleash the power of JavaFX.  In this blog entry I would like to provide you 

  Read the article

• Lost power during upgrade, how do I recover?

  - by Ryan McClure

  I was attempting to update my 11.10 install to 12.04beta. During the install step, I accidentally lost power to my laptop (the power cable came unplugged) and it shut down. Whenever I go to boot now, I can select my install via Grub and it loads up to where the sign-in should happen, but I get a display that looks like what you see as soon as you shut down. It looks like it locks after checking for the battery. Is there anyway, with or without Live media, to restore my machine's install/update to 12.04 but still keep my settings/applications/files?

  Read the article

• Is text-only mode a saving or a problem for battery savings?

  - by Robottinosino

  A friend is flying to the US from Europe and asked me a very thought-provoking question, which I am not remotely able to answer with substance so I am asking it here: How to absolutely maximise battery life on an Ubuntu (laptop) install? do not rush to mark this as duplicate, there is an important point here: does -GNOME- help or worsen battery life? Let me provide some context: The only task he needs to perform is: edit text files in Vim. He is unsure whether running GNOME will drain his battery life more or actually save him some battery life given the smarts of GNOME's power management features like "switch this peripheral to -power save- after X minutes..." (GNOME might just be a configuration front-end for settings that are governed by command-line utils for all I know?) He could perfectly well boot the system in text-only mode and use the automatic 6 virtual consoles for his needs, if that's a saving at all over running tmux (I think so because of all the smart buffering/history/etc the latter does by default?) Exactly how would you advise him to run his laptop during his flight? What I told him already: power off WiFi in the BIOS, not from the "GUI" power off Bluetooth switch off the courtesy light and use low monitor brightness play music off of his phone, not mp3blaster do not use his tiny portable mouse (and do not attach any other USB gimmicks like "screen light", etc) stop development services he will not be using, especially apache2, tomcat, dovecot, postgresql, etc. Potentially: - switch off his cron jobs? (he does an rsync + tar + 7za of his "work in progress" every so often) I think the above is standard stuff one could get off StackExchange, and with many duplicates... the core of this question is, I think: __ will running Ubuntu in text-only mode be a saving in terms of battery life or a problem? why? (provide some technical arguments) __ I think it will be a saving but I am also scared about "other things" detecting and enabling advanced chipset power management features only when some services are started.. and fear these "services" may be off in text-only mode?

  Read the article

• Restricted Flow Of Power

  - by user13827

  I'm sure all is fine, but i need some reassurance. Last month my company launched consolidated two of their websites into one new website. www.fdmgroup.com and www.fdmacademy.com into a newly designed www.fdmgroup.com. Because the FDM Academy grew as it's own brand we decided not to just forward the domain to the fdmgroup website, but instead just mirror the new FDM Group website and use a canonical tags to the FDM Group domain (so the link juice will pass to the FDM Group domain pages) The website has be live for nearly a month and i don't believe any power has passed down through the FDM Group website to it's deeper pages even though 301 redirects from the legacy group and academy domains in place. I am also seeing the same problem on the FDM Academy domain, but i expect to see this as every page has a canonical to the same page on the Is there anything which is restricting the flow of power through the site, or am i just being impatient. Thanks in advance Jon

  Read the article

• 13.10 Desktop - Stop Suspension on Lid Closure

  - by bpmitche

  I'm having a problem with power management settings on my ASUS K52-F Laptop. Upgraded from 13.04 to 13.10 earlier today; closing the laptop lid puts the laptop into suspension (even on AC Power - tried fixing it in gnome power settings, tried fixing it in Cinnamon power settings, tried changing it in DCONF-Editor, but no matter where I change the setting the laptop lid still suspends). After resuming from suspend, I restore to the gnome window/login manager (instead of Cinnamon login manager). Wifi doesn't reconnect, but the icon in Cinnamon shows that I'm connected. IFCONFIG shows that the interface is up and working normally, but still not reconnecting. ifconfig wlan0 down / up doesn't change anything. Any help would be greatly appreciated.

  Read the article

• Power scheme faulty [closed]

  - by user40287

  Hi, I use a laptop. When I take the power cable out to run on batteries, the screen darkens, as it is no longer so bright, to save on battery power. When I put the power cable back in, the screen brightens back to it's original brightness. However, I have since replaced the power cable, and the screen remains darkened. How do I regain the original brightness? Thanks, Steve

  Read the article

• Acer Aspire Timeline - Power control application?

  - by th3dude19

  I recently purchased an Acer Aspire Timeline 3810TZ notebook. It comes equipped with 2 modes, one for power saving (screen is dimmer, etc) and another for when connected to a power source. However, I'd like to control the settings for power save mode (specifically to make the screen a bit brighter) but the system didn't seem to ship with an app installed to modify these settings. Browsing the support site proved unsuccessful also. Anything out there I can do to control the notebook's power save settings?

  Read the article

• Power scheme faulty

  - by user40287

  Hi, I use a laptop. When I take the power cable out to run on batteries, the screen darkens, as it is no longer so bright, to save on battery power. When I put the power cable back in, the screen brightens back to it's original brightness. However, I have since replaced the power cable, and the screen remains darkened. How do I regain the original brightness? Thanks, Steve

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• Ubuntu 12.04 does not recognize Kingston DT108 16GB memory

  - by aceqott

  I bought a Kingston DT108 16GB and Ubuntu did not recognize it.What should i do?? Output of dmesg | tail after connecting pen drive [ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >