Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 16/87 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • SAS disk performance drops a while after reboot.

    - by Flamewires
    So we have some workstations with identical hardware. The Fedora14 box has a couple weeks uptime and still get good performance. hdparm -tT /dev/sda /dev/sda: Timing cached reads: 21766 MB in 2.00 seconds = 10902.12 MB/sec Timing buffered disk reads: 586 MB in 3.00 seconds = 195.20 MB/sec The Cent 5.5 boxes however seem to be okay after a reboot, /dev/sda: Timing cached reads: 34636 MB in 2.00 seconds = 17354.64 MB/sec Timing buffered disk reads: 498 MB in 3.01 seconds = 165.62 MB/sec but some time later( unsure exactly, tested at approx 1 day uptime) /dev/sda: Timing cached reads: 2132 MB in 2.00 seconds = 1064.96 MB/sec Timing buffered disk reads: 160 MB in 3.01 seconds = 53.16 MB/sec drop to this. This is with very low load. I believe they all have the same bios settings. Any ideas what could cause this on Cent? Ask for more info. It might also be worth noting, that passing the --direct flag causes the slow boxes to perform similarly to the non-slow ones for buffered disk reads.

    Read the article

  • how to restore os using acronis

    - by user23950
    I have made a backup using Acronis 2010. And I've tested it on vmware. And I'm having problems booting up the dual boot vm. After restoring from the .tib file. What do I do?What other software that can image the os can you recommend that is easier to use than Acronis.

    Read the article

  • What is the value/cost of enabling "spread spectrum clocking" on my hard drives?

    - by Stu Thompson
    I'm building up a biggish NAS box (10x WD RE4 2TB SATA RAID10) and ran into some problems. During the course of my research, debugging, investigations, etc, I discovered a jumper on the physical drives labeled "spread spectrum clocking". After some googling about this on teh internets, it seems to be a feature that some suggest (without reference or explanation) enabling in 'a storage configuration' that makes the drive less sussesptable to EMI. But why? I've got three core questions: Why is this feature not enabled by default? What are the actual benefits? Are there any costs?

    Read the article

  • few questions on clone zilla

    - by user23950
    I'm trying to clone my windows xp installation. If I back it up using clone zilla and the my xp machine is infected by virus/spyware would I also be bringing the whole mess when I try to back it up. Do I need the whole partition/ whole disk if I use an external hard drive to backup. Would the data be formatted on the partition that I choose?

    Read the article

  • Western Digital My Book not recognized by WD software

    - by Kari
    A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

    Read the article

  • Cannot see folders on my external drive [closed]

    - by Incognito
    I have a Windows Vista Home Premium machine, and am using a WD portable drive. My external drive is showing that it is occupying space, but I am no longer able to see any of my folders in there. Out of the 1 TB, its shows that 600 gigs are free, but the folders are gone! Please suggest some way of retrieving the files (I think they're must be some way to retireve them, since the disk utilization shows that something is on the disk). Appreciate your help!

    Read the article

  • power management of USB-enclosed hard drives

    - by intuited
    With a typical USB hard drive enclosure, is the full range of drive power management functionality available? In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

    Read the article

  • Rescue data from damaged hard disk

    - by Lexsys
    Hello. I have a 500 GB hard drive with one NTFS-partition on it. I can mount it with Ubuntu and view the contents. But when I try to copy something, I get an I/O error. Ok, I tried to make its image with dd. I/O error as soon as it starts. I have installed ddrescue, but its manual page says not to use it with drives, failing on I/O. Can I manage to get some information from this drive and how to do this?

    Read the article

  • Performance of external USB disk with ESXi5

    - by PeterMmm
    I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to server disk. In the VM that takes up to 10 minutes. On a native Win2003 that takes aprox. 3 minutes. I have no explaination for that diference: In any case the bottleneck is the USB connection, much slower than the disks (SAS, RAID1). If the USB connection on the VM would be USB1.1 and not USB2.0 it would take much more time. (The disk performance between server partitions on the VM is correct. - see update) Could be that my native box is extremely fast and the VM is the normal case. ??? Update I try with passtrough and a first run copy the same data in aprox. 7 minutes. Still 2 times slower than the native connection. I also did another messure and the copy between partitions on the same VM takes 3 minutes.

    Read the article

  • Mac OS - Download an save an image file on HDD with Cocoa

    - by Julien
    I'm building a program, and I'm quite confident using Objective-C, but I don't know how to programmatically download a file from the web and copy it on the hard drive. I started with : NSString url = @"http://spiritofpolo.com/images/logo.png"; NSData* data = [NSData dataWithContentsOfURL:[NSURL URLWithString:url]]; But then I don't know what to do with the data... that sucks, no ;) Can somebody help?

    Read the article

  • Download an save an image file on HDD with Cocoa

    - by Julien
    I'm building a program, and I'm quite confident using Objective-C, but I don't know how to programmatically download a file from the web and copy it on the hard drive. I started with : NSString url = @"http://spiritofpolo.com/images/logo.png"; NSData* data = [NSData dataWithContentsOfURL:[NSURL URLWithString:url]]; But then I don't know what to do with the data... that sucks, no ;) Can somebody help?

    Read the article

  • SSD and HDD have window 7 recovery partition. Can I delete one to make room for ubuntu?

    - by Brian Ecker
    I'm trying to install ubuntu right now, and I've run into a problem. I have Windows 7 installed on my SSD, and I want to install ubuntu on my HDD, but I already have three partitions on my HDD. The partitions are two Recovery Partitions and one data partition. What I don't understand is why my data drive(the HDD) has recovery partitions for Windows 7? The same recovery partitions(or atleast I think they are the same. Same sizes, same names, same order) are on the SSD with the Windows 7 install. Can I safely delete the recovery partitions on the HDD? My other option, I think, is to put the boot partition for ubuntu on the SSD where I only have three partitions. Then I can put the other three logical partitions for ubuntu in an extended partition on the HDD. Can I do that, put the boot partition on one drive and the other partitions on another? Here is a picture of the partitions and I have circled the one I would like to delete to make room. http://imgur.com/XOpJQ

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • Why does my HDD produce a high-pitched noise when the CPU is in use?

    - by CyberOptic
    I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

    Read the article

  • How can i install ubuntu on my ntfs hdd without formatting?

    - by Ridvan Coban
    My hdd is just one partition in ntfs (500gb) and 430 gb is used by my photos/movies/music etc which i never will want to lose. Actually i installed ubuntu on a usb flash drive (using it right now) but it is too slow that way. But my problem is : My computer is damaged ( maybe chipset or but not sure) and none of the windows versions (xp,vista,7) works on my pc. I get blue screen error as soon as windows startup logo shows. But ubuntu just works flawless. That means i cannot use wubi. I wanted to shrink my hdd without losing data (which can be done in windows) but found nothing about that on ubuntu forums. Is this possible? Or install ubuntu on my ntfs filesystem? Note : I don't have chance to backup 400 gbs of data. Sorry for my question if it's written a bit compex. I hope you get the point and someone has an idea ;)

    Read the article

  • Problem in multi booting Ubuntu 12.04 with existing Windows XP, 7 and 8 in 500GB HDD with 5 Partitions

    - by Dhruva
    Here's my case. I have 500GB HDD with 5 Partitions with XP, Windows7 and Windows8 RP in the first three. As per one of the instruction I've seen in this forum, I did shrink my 4th Partition to create a 30GB unallocated free space to install Ubuntu 12.04. But, when next I'm trying to boot the Ubuntu CD and choosing "Something Else", its only recognizing my 500GB HDD in whole as "/sda" and not reading the free 30GB space separately to install Ubuntu in it as suggested in the instruction mentioned in this forum. I've also tried to install in from within Windows7, by mounting the Ubuntu ISO file and using the .exe file and instruction thereupon (choosing free drive, user name, installation size, etc.), but that also failed after the PC restarted to continue the installation, showing as error for file extension, partition something error. One thing to be noted that the PC I'm trying to install Ubuntu in it is my Home PC and doesn't have any internet connection. Hence, no updates or otherwise online help. What shall I do?? Kindly suggest. Sorry if I made some grammatical mistakes as English is not my first language. Thanks in advance.

    Read the article

  • Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

    - by Espionage724
    It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

    Read the article

  • Where do I connect the HDD LED wires on my RAID adapter?

    - by Giffyguy
    I'm using a Promise FastTrak TX8660 with RAID 5. The manual (and Google) just doesn't seem to explain how exactly to connect a standard two-pin HDD LED wire to the eight available pins on the card. The Manual just says - To connect your LED, follow the following diagram: The card itself resembles the diagram: But it doesn't make any sense to me. All I have is a two-pin connecter for HDD LED on the front of my computer case. I don't need anything fancy like the fault LED or seperate indicators for each drive. I just want to be able to see when my RAID 5 array is working, that's all. I don't know what the "R" and "G" stand for, but my HDD LED wires are red and white. I tried connecting the red wire to the "R" pin and the white wire to the "G" pin, but that just makes the LED on the front of my case light up indefinitely, even when the computer is idle. Which pins am I suppose to connect the HDD LED header to for basic activity indication?

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    Hi All, I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: http://superuser.com/questions/12955/how-do-i-remove-the-option-to-eject-sata-drives-from-the-windows-7-tray-icon

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: How do I remove the option to eject SATA drives from the Windows 7 tray icon?

    Read the article

  • Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

    - by leeand00
    Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >