Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 17/87 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Copy Windows 7 environment running on external drive to a new HDD partition on a Mac?

    - by sam
    My PC has just given up on me. It's getting a bit old so I took the HDD out and bought a Mac. I've put the PC's HDD into an enclosure, plugged it into the Mac and dragged across most of my files. I've got a couple of programs that are PC-only that I have to run from time to time, so I'd like to make a partition on the Mac and have Windows 7 installed there. I know how to set up a clean version of Windows in Boot Camp. Is there an easy way to copy over the environment on the HDD to the Mac's partition? I don't really need all the stuff on the PC, just the operating system. Is there a better way to do this other than having to deactivate Windows, then reactivate it on the Mac? I have a free upgrade to Windows 7 from Vista, thus I have an upgrade disc, not the full disc.

    Read the article

  • Windows boots to Black Screen of Death — Is my HDD faulty?

    - by Flynn1179
    My wife's PC suddenly stopped booting up properly. It gets as far as the Windows 'loading' screen with the bar scrolling away, but that's as far as it gets for some time, then suddenly flashes up a BSoD barely long enough to see, then the display cuts out. We've got identical PCs, and after swapping components, I established that my PC suffers the same problem if I swap in the HDD. Even if I plug hers in as a second HDD on my machine, it still does the same thing, even though it's booting from mine. I can't even boot her machine from CD or DVD either, so I couldn't even use a recovery disc. I did manage to partially boot my PC into safe mode with the other HDD attached, and it got as far as loading 'crcdisk.sys' and froze. Anybody know what could be wrong with it, or at least how I can get the data off the disk? I'm assuming there's still data on the disk, given that it at least shows me the vista 'loading' screen.

    Read the article

  • How to Recover HDD Formatted by "Create a Recovery Drive" Tool of Windows 8.1?

    - by ide
    I have 2 TB USB HDD which had these drives F: about 1 TB with 750 GB data H: about 120 GB with 60 GB data I: about 780 GB with 250 GB data (For TV: It was raw in Windows but visible in the Smart TV) I took 521 MB from last part of H to get new G drive. Then I run "Create a Recovery Drive" tool of Windows 8.1 and chose G drive. It said all data in the drive will be deleted. I thought it is just G drive but it deleted my whole HDD. It created 32 GB new F drive with writing 337 MB on it and rest of HDD is unallocated. I tried these programs to get my first 3 drives but non of them helped for getting 1st partition. TestDisk MiniTool Partition Wizard Home Edition EaseUS Partition Master 9.2.2 (I deleted new F drive volume because it scans only unallocated part) Recuva PC Inspector File Recovery

    Read the article

  • Raspberry Pi: mvoe home & var folders to USB HDD?

    - by doni49
    I have a Raspberry Pi running raspian. I've installed Apache2, PHP & MySQL. Apache & MySQL are both configured to use sub-directories of /var. I'd like to use a directory on my USB HDD instead of my SD card. I'd also like to move the /home directory to the USB HDD. I'd like to avoid re-partioning my HDD if possible. I thought maybe I could use a symlink to tell raspian that /var is really at /media/USBHDD1/var and /home is really at /media/USBHDD1/home. I tried it last night but couldn't get it to work.

    Read the article

  • What's the best way to format an external HDD for both OSX and Windows ?

    - by George Profenza
    I have an external HDD (1TB) and I'd like to use it on OSX and Windows. I had another external HDD using NTFS and I used NTFS-3G on osx to write files, but I found the reading/writing very slow. Googling a bit I see many people recommend HFS+ in conjuction with HFS Explorer for Windows. Is this the best way ? Is it possible to have two partitions, one HFS+ and one NTFS ? Is it a good option or is it better to use one partition ? I've seen this thread on using UDF for USB flash drive. Would that be suited for an USB external HDD ?

    Read the article

  • How can I mount an image from an external HDD to a partition within the host system?

    - by HardwareMuch
    I'm currently using Acronis True Image Home 2010 and I have created an image of my Windows 7 OS. I copied it to my external HDD and I repartitioned my other PC's HDD. The primary partition houses the Windows Xp system which also has Acronis installed. The new partition is logical. Whenever I try to go through the steps on "Clone Disk" the program would not let me select a destination drive if I choose the external HDD as the source. I also did not know that it you can only select disks instead of partitions as a source or destination. Any suggestions would be greatly appreciated. Thanks.

    Read the article

  • Can I recover data from external HDD or do I format and lose it all?

    - by Col
    I have a Maxtor external HDD 500GB but haven't used it for a year or so. I have plugged it into a new laptop as the one I used it with before is busted. I know that there is a ton of data on the HDD that I would love to have the use of - mostly family and friends photos to be honest. But when I click on the HDD in Windows Explorer the only option I am given is to reformat the drive and lose the data. I'd be grateful if anyone could tell me if there is a way to get the data off the external drive before formatting it and losing it all.

    Read the article

  • Migrating a running production server to Xen, unmodified as a second HDD?

    - by DaveCol
    I have a production server which I am looking to virtualize via XEN. For this purpose I have purchased a new Sata HDD, in which I have promptly installed CentOS 5.5 x64 with XEN server installed. Now I have two HDD: /dev/sda1 running as host with Xen Server Installed; and /dev/sda2 which is the HDD where the original server has installed. Is it posible to use /dev/sda2 to work as GuestOS in a xen server? Would I have to modify its kernel? Thank you for any input

    Read the article

  • How do I backup (from Vista Home Premium) to a FAT32 HDD connected to a wireless router with no user account or password set?

    - by Scubadooper
    I have a Seagate expansion 2TB HDD which I've managed to get working on my wireless router (thanks to fat32format) however I haven't managed to set my backup to work with it. Vist Home Premium requires that I input a username and password in the backup utility. As far as I'm aware that type of access control isn't set on the HDD: Can I set up the access control on the HDD? If so how Or, can I set the backup to work without it? If so how Thanks for your help, I haven't been able to find the answer anywhere on the net so far

    Read the article

  • Is it possible to have two HDD's, and both be primary?

    - by qwerty2
    Here is my configuration: C: - system/Windows XP HDD D: - empty I just added a new hard drive (D) and formatted it and made it a primary HDD. Since then Windows hasn't been able to boot. Is the computer able to have both the system and the new HDD as primary? If not, then that is why Windows isn't booting. If it IS possible, then I have no idea what the problem is. Any help or thoughts would be fantastic! thanks!

    Read the article

  • 4 month old 500 GB SATA HDD making noise?

    - by metal gear solid
    My 4 month old 500 GB SATA HDD making noise sometimes and the PC hangs when it makes noise when the noise stops desktop work fine. It doesn't happen every day but it does happen. Is something wrong with HDD, Data, power cable, or my cabinet's power supply? Should I run scandisk or defragmentation on the disk.

    Read the article

  • Can I put a SATA2 HDD into a laptop supporting SATA1?

    - by user22559
    I have a laptop that supports SATA1 (1.5 GB/sec) The HDD for it has bad sectors, and I want to buy another one. It seems that where I live, SATA1 notebook HDDs aren't really available (only if you wait for a few weeks for them to be delivered), and they cost more than SATA2 HDDs. So I was wondering if I buy a SATA2 (3GB/sec) HDD, will it work without problems on my laptop? The laptop is an HP Pavilion DV6000

    Read the article

  • How to workaround or diagnose a kernel panic when "safely removing" external hdd?

    - by Shawn
    I'm experiencing an issue when using the "Safely Remove" option to remove my 1TB external HDD from the Unity Launcher. Not every time, but occasionally my screen will go black and display LARGE amounts of text information (which I obviously cannot screen cap). The jist of the info displayed is that unmounting or 'safely removing' the drive causes a kernel panic. Is there a Command Line command to remove mounted drives, or at least one that would show me some sort of error output when the drive is removed? I'm trying to narrow down the cause. I could be imagining this, but it seems to happen most often when I have other programs running when I remove the drive (i.e. Firefox, Transmission). Please note that my external drive is not in use when I attempt to remove it and it is not being used either by Firefox or Transmission at these times. Any help would be appreciated.

    Read the article

  • Install/running ubuntu on extarnal HDD with a windows laptop?

    - by Peter
    Sorry for asking, especially as I've trawled through many similar questions. Mine is of the most basic element I think as this kind of thing is really out of my ball park. Anyway I wanted to if by installing ubuntu on my old laptop hdd (I now use it as external storage), can I run it on my laptop which has windows installed. I can't take the chance of installing on the laptop as I'm currently studying, and I have a years worth of work on here (most backed up elsewhere), and will be using it a lot. However there are some programmes I can use if I can get ubuntu that will be helpful for one or two classes. Sorry for the very basic question.

    Read the article

  • 12.04 Software "RAID 0" on desktop replacement, 2 HDD?

    - by gregzeng
    Hardware: HP Pavilion DV7 notebook: 8GB DDR3, 2x 750GB SATA2 HDD, I7 c+ Radeon GPU, eSATA, Bluray, etc. Currently multiboot with Win7-64 + choice of 5 'buntu-64. Prefer Xubuntu-64-alternate, but not able to install software RAID-0 at the last active partition on both HDDs. Tried many types: real boot partition, etc. All my Linux op sys boot successfully from the extended partitions on both drives, but without RAID of any kind. Theory - yes. But has anyone really succeeded with 12.04 software RAID-0?

    Read the article

  • External-Harddisk drive couldn't run unless in safe mode

    - by zfm
    This is the strangest thing ever happened to me... I have an external harddisk drive (ext-HDD), bought around 2 years ago (don't know whether this is an important issue or not). Here, I have a video file (.avi) in my internal harddisk dive (HDD), it worked very well, then I copy it to my ext-HDD, but I couldn't run the file directly from my ext-HDD! I tried to copy it back to my HDD (from the ext-HDD), and now the copy couldn't be run on my HDD too. Remember that I copy the file, so the original one was still there. I tried to go to safe mode (forget to mention, I use Windows 7 Pro), and this is where the strange thing happened, the copied files (both in ext-HDD and HDD) can be run in this safe mode. So, my question is, what could actually be happened there? PS: My ext-HDD is Axioo, 250 GB, exFAT... Edited: Currently I used MacOSX, and the file in the harddisk still can't be run. I haven't tried safe mode for Mac (is there one?), but will try later (if there is)

    Read the article

  • SMART Status Data Interpretation - Disk Utility

    - by Mah
    Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

    Read the article

  • Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

    - by Keeper Hood
    I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

    Read the article

  • How to show an animated spinner while a background task is processing in nested rails model using aj

    - by Globalkeith
    My specific example is highly complex, so I will use the example shown by Ryan from Railscasts to discuss this: http://railscasts.com/episodes/197-nested-model-form-part-2 Background I have a form, let's say "Survey", which contains an arbitrary number of "Questions". Senario Give i am on the "Edit Survey" page. I would like to add a button to each "Question" field which calls a remote_function, which in turn queue's up a delayed_job to execute some processing on the "Question". To give feedback to the user, i would like to disable the button, and show an animated spinner, which remains until the delayed_job has processed the "Question". Hint - I can add methods to the "Question" model to indicate the status of the delayed_job. So, with best practices in mind, what is the best way to achieve this?

    Read the article

  • OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

    - by John
    from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

    Read the article

  • How do I get my internal HDD to mount at startup?

    - by el_gallo_azul
    It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

    Read the article

  • How to do a hexdump of first track of HDD?

    - by Daniel Gratz
    How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

    Read the article

  • DVD playback with Windows Media Player 11 works fine, but when copied to HDD and then played back, t

    - by stakx
    I have several DVDs with short documentaries on it. Since the notebook I'm using (a Dell Latitude E6400) has only one DVD drive, and I might play back those short movies very often, I thought of copying them to the HDD and playing them back from there. However, I've run into a problem, namely stuttering audio. Problem description: When I play back these movies directly from DVD (with Windows Media Player 11 under Windows Vista), everything works fine. Smooth video, no significant audio problems (only the occasional click). But as soon as I copy any of these DVDs to the HDD and try to play them back from there (e.g. using the wmpdvd://drive/title/chapter?contentdir=path protocol, I get stuttering audio — audio playback sounds like a machine gun for a third of a second or so, approx. every 8 seconds. I have tried converting the VOB files from the DVD to another format (ie. ripping), but that resulted in a noticeable downgrade of picture quality. Therefore I thought it best to keep the files in their original format, if possible. Still, I suspect that the stuttering audio is due to some (de-)muxing problem, and that changing the file format might help. (After all, video playback is fine; therefore I don't think that the hardware is too slow for playback.) Only thing is, I don't know how to convert the VOB files to another Windows Media Player-compatible format without quality loss. I hope someone can help me, or give me further pointers on things I could try out to get HDD playback to work without the problem described. Some things I've tried so far, without any success: VOB2MPG, in order to convert the .vob file to a .mpg file. But that changes only the A/V container, not the content. No re-encoding takes place at all. Re-encoding with MPlayer/MEncoder. Lots of quality loss there, and I frankly haven't got the time to test all possible settings combinations available. Disabling all plug-ins, equalizers, etc. in Windows Media Player. Disabling all hardware acceleration on the audio playback device. Further info on the VOB files I'm trying to playback: The video format is MPEG ES, PAL 720x576 pixels @ 24/25 frames per second. The sound stream is uncompressed PCM, 16-bit stereo @ 48kHz. (Might it help if I somehow re-encoded the sound stream at a lower resolution, or as an MP3? If so, how would I do this without changing the video stream?) P.S.: I am limited to using Windows Media Player (11). (I previously tried MPlayer btw., but the video playback quality was surprisingly bad.)

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >