Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 15/87 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Storing an arbitrary R object onto HDD?

  - by Harokitty

  I understand that we can export data matrices to csv or xlsx files. What about complex objects like lm? For example, in my work I might have a list of length 1000, each with a single lm() object. Each time I load R I have to wait a long time to populate the 1000 length list with these lm objects with a for loop or a lapply. I would rather just save the list somewhere on my HDD at the end of a session and open it at the start of the next session.

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• Tools to backup an external hard disk

  - by Kaushik Gopal

  Hey people, What's the best method to take an exact copy of my external hard disk? A guru suggested rsync, but I was wondering if there's an easier alternative. I do remember reading somewhere that Acronis also does this. Was looking for your advice on the best option. I'm running Windows. Essentially i have an external HDD which has a lot of stuff synchronized across various pcs. I wish to take a backup of this external Hard disk (ext.HDDs aren't entirely reliable so want to keep a backup of my ext.HDD). Cheers. K

  Read the article

• western digital caviar black. EXT4-fs error [migrated]

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• How do I mount my External HDD with filesystem type errors?

  - by Snuggie

  I am a relatively new Ubuntu user and I am having some difficulty mounting my external 2TB HDD. When I first installed Linux my external HDD was working just fine, however, it has stopped working and I have a lot of important files on there that I need. Before my HDD would automatically mount and no worries. Now, however, it doesn't automatically mount and when I try to manually mount it I keep running into filesystem type errors that I can't seem to get past. Below are images that depict my step by step process of how I am trying to mount my HDD along with the errors I am receiving. If anybody has any idea what I am doing wrong or how to correct the issue I would greatly appreciate it. Step 1) Ensure the computer recognizes my external HDD. pj@PJ:~$ dmesg ... [ 5790.367910] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1022 PQ: 0 ANSI: 6 [ 5790.368278] scsi 7:0:0:1: Enclosure WD SES Device 1022 PQ: 0 ANSI: 6 [ 5790.370122] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5790.370310] ses 7:0:0:1: Attached Enclosure device [ 5790.370462] ses 7:0:0:1: Attached scsi generic sg3 type 13 [ 5792.971601] sd 7:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5792.972148] sd 7:0:0:0: [sdb] Write Protect is off [ 5792.972162] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 5792.972591] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.972605] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.975235] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.975249] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.987504] sdb: sdb1 [ 5792.988900] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.988911] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.988920] sd 7:0:0:0: [sdb] Attached SCSI disk Step 2) Check if it mounted properly (it does not) pj@PJ:~$ df -ah Filesystem Size Used Avail Use% Mounted on /dev/sda1 682G 3.9G 644G 1% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys none 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security udev 2.9G 4.0K 2.9G 1% /dev devpts 0 0 0 - /dev/pts tmpfs 1.2G 928K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 156K 2.9G 1% /run/shm gvfs-fuse-daemon 0 0 0 - /home/pj/.gvfs Step 3) Try mounting manually using NTFS and VFAT (both as SDB and SDB1) pj@PJ:~$ sudo mount /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t ntfs /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so pj@PJ:~$ sudo mount -t ntfs /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb1 /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• HD Tune warning for "Reallocated Event Count" with a new/unused drive. How serious is that?

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• How to safely remove a USB device from 2008 Core server?

  - by Qwerty

  I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

  Read the article

• Mounting 2.5" SSD in Antec Atlas 550's 3.5" bay

  - by cecilkorik

  Just got some new SSDs to add to my servers, unfortunately there doesn't appear to be anywhere to actually mount them. The cases are Antec Atlas 550 mid-tower server cases. The problem is that the 3.5" bays are intended for 3.5" hard drives (obviously) not SSDs, so they are mounted from the bottom with rubber grommets to reduce vibration. There are NO side-holes in any of the 3.5" bays, all mounting has to be done from the bottom of the drive, through the thick rubber grommets, which requires special extra-long screws with large heads. Those screws will not work with the SSD, the thread is too coarse, 2.5" drives apparently use M3 screws with a finer pitch. The case's 3.5" bays have holes aligned for 2.5" drives and by moving the grommets into the appropriate holes they line up with the SSD. But that's as far as I can get. I don't have and cannot find any screws that use the finer M3 pitch that are long enough and have the wide head. I can't remove the grommets because the screw holes are much too wide without them, the entire head of the screw fits through. And again, there are no side-holes, so I can't use the mounting bracket that came with the drive nor any other 2.5"-3.5" bracket I've found. Here is a pic of what I am dealing with (note that the SSD is just resting on the case, it's not currently screwed in if that's not clear) Any ideas for safely mounting these little guys without resorting to duct tape or superglue would be very appreciated. If anyone knows where I could buy the appropriate type of M3 threaded screw or has any other ideas please help me out here.

  Read the article

• How to install Windows 7 from MS-DOS?

  - by B11002

  Before, I can copy Windows XP CD contents to D:\windowsxp, then Boot DOS CD format C: /s /q D:\windowsxp\i386\winnt.exe How to install Windows 7 from MS-DOS? I found install from USB only.

  Read the article

• Can an SATA hard drive image be restored onto an SSD?

  - by Bryan Parker

  I'm currently using an SATA hard drive on my primary dev machine, but planning to upgrade to an SSD at some point soon. I use TrueImage on a regular basis to make backups, and to upgrade my harddrive without reinstalling everything. Will I be able to restore and boot onto an SSD? Will there be a performance hit or other issues to watch out for?

  Read the article

• Dismount USB External Drive using powershell

  - by JC

  Hello, I am attempting to dismount an external USB drive using powershell and I cannot successfuly do this. The following script is what I use: #get the Win32Volume object representing the volume I wish to eject $drive = Get-WmiObject Win32_Volume -filter "DriveLetter = 'F:'" #call dismount on that object there by ejecting drive $drive.Dismount($Force , $Permanent) I then check my computer to check if drive is unmounted but it is now. The boolean parameters $force and $permanent have been tried with different permutations to no avail. The exit code returned by the dismount command changes when the params are toggled. (0,0) = exit code 0 (0,1) = exit code 2 (1,0) = exit code 0 (1,1) = exit code 2 The documentation for exit code 2 indicates that there are existing mount points as a reason why it cannot dismount. Although I am trying to dismount the only mount point that exists so I am unsure what this exit code is trying to tell me. Having already trawled the web for people experiencing similar problems I have only found one additional command to try and that is the following: # executed after the .Dismount() command $drive.Put() This additional command does not help. I am running out of things to try, so any assistance anyone can give me would be greatly appreciated, Thanks.

  Read the article

• Ubuntu raid 1 write errors

  - by Micah

  I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

  Read the article

• Network attached external harddrive from another computer.

  - by Paul Knopf

  I have a server that is setup in raid. It is on the same network as my main computer. I would like to have some of the memory on my server to act as a network attached drive on my main computer. Basically, I want it to be a new data drive (similar two C:\, but 2nd drives are mostly E:). That way, I can reformat my main computer without loosing any important data. And the data that is saved (on server E:\ drive) is secured via raid mirroring.

  Read the article

• Can an SATA hard drive image be restored onto an SSD?

  - by Bryan Parker

  I'm currently using an SATA hard drive on my primary dev machine, but planning to upgrade to an SSD at some point soon. I use TrueImage on a regular basis to make backups, and to upgrade my harddrive without reinstalling everything. Will I be able to restore and boot onto an SSD? Will there be a performance hit or other issues to watch out for?

  Read the article

• best storage option for recording live streaming video

  - by Alchemical

  We're creating a new web site that includes video chat capabilities. Wowza Server is being used for the streaming media. We would like the capability for users to record their video chats in certain circumstances. Is it feasible to record the videos to the same server running Wowza? Or performance-wise, would it make more sense to store them on another server? I understand SANs are popular as well, but I'm a little concerned about cost for those as we are on a fairly tight budget. Currently we have two servers with pretty decent RAID cnofigurations for storage, one has 14TB and the other 6TB. Mostly concerned if doing the recording on the same server as the streaming server (or web server), could significantly adversely affect that server's primary function.

  Read the article

• Best way to use my windows box as a backup?

  - by DFischer

  I put a 1.5 TB HD in my Windows 7 box and my main computer is a MBP. I have a lot of professional files/folders in a FireWire 800 external HD connected to the MBP and I want to use the 1.5 TB HD in my Windows 7 box as a backup for both the HD and MBP. Right now I am just copying files manually to the HD over the network and that's very slow and open to failure (not rsync'd.) Anyone suggest some appropriate solutions? Should I just figure out how to setup RSync on the windows box or is there a better alternative? Thanks!

  Read the article

• Best way to use my windows box as a backup?

  - by user29336

  I put a 1.5 TB HD in my Windows 7 box and my main computer is a MBP. I have a lot of professional files/folders in a FireWire 800 external HD connected to the MBP and I want to use the 1.5 TB HD in my Windows 7 box as a backup for both the HD and MBP. Right now I am just copying files manually to the HD over the network and that's very slow and open to failure (not rsync'd.) Anyone suggest some appropriate solutions? Should I just figure out how to setup RSync on the windows box or is there a better alternative? Thanks!

  Read the article

• df shows partition as full, but du shows it as only 25% full

  - by Jakobud

  I have a humble linux server to do some stuff for me. I only have an old 16gig drive in it. df -h Filesystem Size Used Avail Use% Mounted on /dev/md1 16G 16G 0 100% / /dev/md0 121M 14M 101M 13% /boot tmpfs 502M 0 502M 0% /dev/shm but when I do: du -sh / 3.5G / So one says that my 16G drive is full. The other says only 3.5G is used. Why the discrepancy? I cannot write any new files as it says the drive is indeed full. But if I can't find the files taking up all the space on the file-system, how can I delete them to free up space?

  Read the article

• Warning for "Reallocated Event Count" S.M.A.R.T. attribute with a new/unused drive. How serious is t

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• Centos expanding directory

  - by Ansell Cruz

  I currently have a file server, all the files are installed in /usr/local/nginx/html/. The setup is 1 hard disk with 1TB of data. This 1TB of storage is all used up. I asked the guys to add 2 HDDs with 2TB each. This new HDDs will be used for new storage of files. Now, if I mount this 2 new HDDs into /usr/local/nginx/html/, the current files in there will be deleted. My goal is to expand the storage in /usr/local/nginx/html/ without losing data in it. Would this be possible?

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• Grounded outlet on external hard drive.

  - by goathens

  Is there any value in getting an external hard drive with a grounded power supply? Would grounding the drive protect it from a static jolt from my hand when I pick it up? I've only really ever used the huge 5.25" external housings (they usually have an integrated power supply and use the standard heavy PSU cable with ground), and I need some more but noticed while shopping that the current trend is towards smaller enclosures with the external brick (and hardly ever grounded).

  Read the article

• S.M.A.R.T. broken sectors

  - by Jeffrey Vandenborne

  Recently I received my hard drive (LaCie) that I've sent away for warranty, my disk failed, and I used Palimpsest Disk utility to check if anything was wrong in the S.M.A.R.T Status. And it said that there were a few broken sectors. So the next day, I went to the store and told the story. 4 weeks later I actually got my drive back. The first thing I did was plugging it in and starting the disk utility, and weirdly it showed me pretty much the exact same things, even the values of most tests were the same as they were before when my drive broke. The serial number is different though, but it does show a very peculiar value. Now I'm wondering, I'm almost sure it's the exact same drive and it still says I've got broken sectors, does it just say that because it has been cached in the drive somewhere while LaCie DID actually fix it? Or should I run the extended self test (which seems to take hours) first? Also I've tried the smartctl command tool, it says the drive has smart support, but it doesn't show anything, it says that it's enabled, but then it says that it's disabled, picture below The picture of the Disk utility: Thanks in advance

  Read the article

• Need tool to change Hard Disk id unique

  - by Ravi Chhabra

  There was a tool called PB Downforce that does something like this that's been discontinued as it was buggy and stopped working for it's purposes. So is there any alternative, as I have a licensed software that is attached to the HD Id. Thanks.

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >