Search Results

Search found 1228 results on 50 pages for 'battery calibration'.

Page 16/50 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Why isn't my phone charging with some micro usb cables?

    - by Jacxel
    I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

    Read the article

  • How can something relevant to graphics completely kill a motherboard?

    - by leladax
    I was coding something in OpenGL and after a bug there was an 'OS slowed down' situation. After a few seconds the screen went blank and the laptop shutdown. Now not even a led turns on battery or not. It doesn't appear to be the AC or the battery since there was some battery when it died and when it's connected to the AC the laptop produces near the AC connection a very slight 'clicking' noise (very faint, one has to be very careful to notice it, I don't know if it was there forever tbh). I suspect the motherboard died, as in something from the point it gets AC or battery power and the point it actually feeds itself. But I can't figure out how that effect was produced by the OpenGL bug or graphics overheating. If the graphics died alone, it should at least give some indication that the laptop is barely alive, at least a led, a sound, anything, the laptop is instead completely dead (other than faint 'clicking' I mentioned). Does anyone have expert advice on this? I'm especially interested in any ideas connected to "graphics overheated/bugged ---- they killed motherboard". I have a very lengthy experience in that stuff as a hobbyist and it really puzzles me. It's not just a "AC died" situation I can easily google.

    Read the article

  • eBooks on iPad vs. Kindle: More Debate than Smackdown

    - by andrewbrust
    When the iPad was presented at its San Francisco launch event on January 28th, Steve Jobs spent a significant amount of time explaining how well the device would serve as an eBook reader. He showed the iBooks reader application and iBookstore and laid down the gauntlet before Amazon and its beloved Kindle device. Almost immediately afterwards, criticism came rushing forth that the iPad could never beat the Kindle for book reading. The curious part of that criticism is that virtually no one offering it had actually used the iPad yet. A few weeks later, on April 3rd, the iPad was released for sale in the United States. I bought one on that day and in the few additional weeks that have elapsed, I’ve given quite a workout to most of its capabilities, including its eBook features. I’ve also spent some time with the Kindle, albeit a first-generation model, to see how it actually compares to the iPad. I had some expectations going in, but I came away with conclusions about each device that were more scenario-based than absolute. I present my findings to you here.   Vital Statistics Let’s start with an inventory of each device’s underlying technology. The iPad has a color, backlit LCD screen and an on-screen keyboard. It has a battery which, on a full charge, lasts anywhere from 6-10 hours. The Kindle offers a monochrome, reflective E Ink display, a physical keyboard and a battery that on my first gen loaner unit can go up to a week between charges (Amazon claims the battery on the Kindle 2 can last up to 2 weeks on a single charge). The Kindle connects to Amazon’s Kindle Store using a 3G modem (the technology and network vary depending on the model) that incurs no airtime service charges whatsoever. The iPad units that are on-sale today work over WiFi only. 3G-equipped models will be on sale shortly and will command a $130 premium over their WiFi-only counterparts. 3G service on the iPad, in the U.S. from AT&T, will be fee-based, with a 250MB plan at $14.99 per month and an unlimited plan at $29.99. No contract is required for 3G service. All these tech specs aside, I think a more useful observation is that the iPad is a multi-purpose Internet-connected entertainment device, while the Kindle is a dedicated reading device. The question is whether those differences in design and intended use create a clear-cut winner for reading electronic publications. Let’s take a look at each device, in isolation, now.   Kindle To me, what’s most innovative about the Kindle is its E Ink display. E Ink really looks like ink on a sheet of paper. It requires no backlight, it’s fully visible in direct sunlight and it causes almost none of the eyestrain that LCD-based computer display technology (like that used on the iPad) does. It’s really versatile in an all-around way. Forgive me if this sounds precious, but reading on it is really a joy. In fact, it’s a genuinely relaxing experience. Through the Kindle Store, Amazon allows users to download books (including audio books), magazines, newspapers and blog feeds. Books and magazines can be purchased either on a single-issue basis or as an annual subscription. Books, of course, are purchased singly. Oddly, blogs are not free, but instead carry a monthly subscription fee, typically $1.99. To me this is ludicrous, but I suppose the free 3G service is partially to blame. Books and magazine issues download quickly. Magazine and blog subscriptions cause new issues or posts to be pushed to your device on an automated basis. Available blogs include 9000-odd feeds that Amazon offers on the Kindle Store; unless I missed something, arbitrary RSS feeds are not supported (though there are third party workarounds to this limitation). The shopping experience is integrated well, has an huge selection, and offers certain graphical perks. For example, magazine and newspaper logos are displayed in menus, and book cover thumbnails appear as well. A simple search mechanism is provided and text entry through the physical keyboard is relatively painless. It’s very easy and straightforward to enter the store, find something you like and start reading it quickly. If you know what you’re looking for, it’s even faster. Given Kindle’s high portability, very reliable battery, instant-on capability and highly integrated content acquisition, it makes reading on whim, and in random spurts of downtime, very attractive. The Kindle’s home screen lists all of your publications, and easily lets you select one, then start reading it. Once opened, publications display in crisp, attractive text that is adjustable in size. “Turning” pages is achieved through buttons dedicated to the task. Notes can be recorded, bookmarks can be saved and pages can be saved as clippings. I am not an avid book reader, and yet I found the Kindle made it really fun, convenient and soothing to read. There’s something about the easy access to the material and the simplicity of the display that makes the Kindle seduce you into chilling out and reading page after page. On the other hand, the Kindle has an awkward navigation interface. While menus are displayed clearly on the screen, the method of selecting menu items is tricky: alongside the right-hand edge of the main display is a thin column that acts as a second display. It has a white background, and a scrollable silver cursor that is moved up or down through the use of the device’s scrollwheel. Picking a menu item on the main display involves scrolling the silver cursor to a position parallel to that menu item and pushing the scrollwheel in. This navigation technique creates a disconnect, literally. You don’t really click on a selection so much as you gesture toward it. I got used to this technique quickly, but I didn’t love it. It definitely created a kind of anxiety in me, making me feel the need to speed through menus and get to my destination document quickly. Once there, I could calm down and relax. Books are great on the Kindle. Magazines and newspapers much less so. I found the rendering of photographs, and even illustrations, to be unacceptably crude. For this reason, I expect that reading textbooks on the Kindle may leave students wanting. I found that the original flow and layout of any publication was sacrificed on the Kindle. In effect, browsing a magazine or newspaper was almost impossible. Reading the text of individual articles was enjoyable, but having to read this way made the whole experience much more “a la carte” than cohesive and thematic between articles. I imagine that for academic journals this is ideal, but for consumer publications it imposes a stripped-down, low-fidelity experience that evokes a sense of deprivation. In general, the Kindle is great for reading text. For just about anything else, especially activity that involves exploratory browsing, meandering and short-attention-span reading, it presents a real barrier to entry and adoption. Avid book readers will enjoy the Kindle (if they’re not already). It’s a great device for losing oneself in a book over long sittings. Multitaskers who are more interested in periodicals, be they online or off, will like it much less, as they will find compromise, and even sacrifice, to be palpable.   iPad The iPad is a very different device from the Kindle. While the Kindle is oriented to pages of text, the iPad orbits around applications and their interfaces. Be it the pinch and zoom experience in the browser, the rich media features that augment content on news and weather sites, or the ability to interact with social networking services like Twitter, the iPad is versatile. While it shares a slate-like form factor with the Kindle, it’s effectively an elegant personal computer. One of its many features is the iBook application and integration of the iBookstore. But it’s a multi-purpose device. That turns out to be good and bad, depending on what you’re reading. The iBookstore is great for browsing. It’s color, rich animation-laden user interface make it possible to shop for books, rather than merely search and acquire them. Unfortunately, its selection is rather sparse at the moment. If you’re looking for a New York Times bestseller, or other popular titles, you should be OK. If you want to read something more specialized, it’s much harder. Unlike the awkward navigation interface of the Kindle, the iPad offers a nearly flawless touch-screen interface that seduces the user into tinkering and kibitzing every bit as much as the Kindle lulls you into a deep, concentrated read. It’s a dynamic and interactive device, whereas the Kindle is static and passive. The iBook reader is slick and fun. Use the iPad in landscape mode and you can read the book in 2-up (left/right 2-page) display; use it in portrait mode and you can read one page at a time. Rather than clicking a hardware button to turn pages, you simply drag and wipe from right-to-left to flip the single or right-hand page. The page actually travels through an animated path as it would in a physical book. The intuitiveness of the interface is uncanny. The reader also accommodates saving of bookmarks, searching of the text, and the ability to highlight a word and look it up in a dictionary. Pages display brightly and clearly. They’re easy to read. But the backlight and the glare made me less comfortable than I was with the Kindle. The knowledge that completely different applications (including the Web and email and Twitter) were just a few taps away made me antsy and very tempted to task-switch. The knowledge that battery life is an issue created subtle discomfort. If the Kindle makes you feel like you’re in a library reading room, then the iPad makes you feel, at best, like you’re under fluorescent lights at a Barnes and Noble or Borders store. If you’re lucky, you’d be on a couch or at a reading table in the store, but you might also be standing up, in the aisles. Clearly, I didn’t find this conducive to focused and sustained reading. But that may have more to do with my own tendency to read periodicals far more than books, and my neurotic . And, truth be known, the book reading experience, when not explicitly compared to Kindle’s, was still pleasant. It is also important to point out that Kindle Store-sourced books can be read on the iPad through a Kindle reader application, from Amazon, specific to the device. This offered a less rich experience than the iBooks reader, but it was completely adequate. Despite the Kindle brand of the reader, however, it offered little in terms of simulating the reading experience on its namesake device. When it comes to periodicals, the iPad wins hands down. Magazines, even if merely scanned images of their print editions, read on the iPad in a way that felt similar to reading hard copy. The full color display, touch navigation and even the ability to render advertisements in their full glory makes the iPad a great way to read through any piece of work that is measured in pages, rather than chapters. There are many ways to get magazines and newspapers onto the iPad, including the Zinio reader, and publication-specific applications like the Wall Street Journal’s and Popular Science’s. The New York Times’ free Editors’ Choice application offers a Times Reader-like interface to a subset of the Gray Lady’s daily content. The completely Web-based but iPad-optimized Times Skimmer site (at www.nytimes.com/timesskimmer) works well too. Even conventional Web sites themselves can be read much like magazines, given the iPad’s ability to zoom in on the text and crop out advertisements on the margins. While the Kindle does have an experimental Web browser, it reminded me a lot of early mobile phone browsers, only in a larger size. For text-heavy sites with simple layout, it works fine. For just about anything else, it becomes more trouble than it’s worth. And given the way magazine articles make me think of things I want to look up online, I think that’s a real liability for the Kindle.   Summing Up What I came to realize is that the Kindle isn’t so much a computer or even an Internet device as it is a printer. While it doesn’t use physical paper, it still renders its content a page at a time, just like a laser printer does, and its output appears strikingly similar. You can read the rendered text, but you can’t interact with it in any way. That’s why the navigation requires a separate cursor display area. And because of the page-oriented rendering behavior, turning pages causes a flash on the display and requires a sometimes long pause before the next page is rendered. The good side of this is that once the page is generated, no battery power is required to display it. That makes for great battery life, optimal viewing under most lighting conditions (as long as there is some light) and low-eyestrain text-centric display of content. The Kindle is highly portable, has an excellent selection in its store and is refreshingly distraction-free. All of this is ideal for reading books. And iPad doesn’t offer any of it. What iPad does offer is versatility, variety, richness and luxury. It’s flush with accoutrements even if it’s low on focused, sustained text display. That makes it inferior to the Kindle for book reading. But that also makes it better than the Kindle for almost everything else. As such, and given that its book reading experience is still decent (even if not superior), I think the iPad will give Kindle a run for its money. True book lovers, and people on a budget, will want the Kindle. People with a robust amount of discretionary income may want both devices. Everyone else who is interested in a slate form factor e-reading device, especially if they also wish to have leisure-friendly Internet access, will likely choose the iPad exclusively. One thing is for sure: iPad has reduced Kindle’s market, and may have shifted its mass market potential to a mere niche play. If Amazon is smart, it will improve its iPad-based Kindle reader app significantly. It can then leverage the iPad channel as a significant market for the Kindle Store. After all, selling the eBooks themselves is what Amazon should care most about.

    Read the article

  • Acer Aspire ASE700-UQ660A will not respond to power button

    - by Tim R.
    This is something of a continuation of this question. I am now completely unable to boot this computer. The last time I used it, I used hibernation mode. When I needed to use it again, it would not respond at all to the power button, keyboard, or mouse. I tried: Holding down the power button for 15 seconds pressing the power button Unplugging the power cord for 30 seconds, plugging it back in, and trying again Removing the motherboard battery for over a minute and reinstalling it Before removing the motherboard battery, none of the lights on the front of the computer lit up. After reinstalling the battery and plugging the power cord back in, the light behind the power button is constantly illuminated (without even pressing the power button), but there is still no response to the power button, no fans turned on, nothing else that would indicate that it is running. System: Acer Aspire ASE700-UQ660A (Specs should be all factory defaults except:) 4 GB RAM Nvidia GeForce 8600 GT with driver version 197.45 Windows 7 Professional 64 bit

    Read the article

  • My acer aspire laptop suddenly stopped working, just a blank screen

    - by mazda
    My acer aspire laptop suddenly stopped working while it was connected to my nokia mobile modem through usb. It stopped with power swich staying on and no response to clicking off, no irregular sound, nothing but just a blank screen. I disconnected the power and battery quickly but power switch did not respond at all and even the power indicator didn't turn on again. the display was also gone after disconecting the power and removing battery. It has no response or any sign of power while both battery and power supply are working. What do you think? A completely dead mainboard? Does the MB has any safty board or fuse that could be replaced? Any suggestion will be appreciated, Thank you.

    Read the article

  • My Macbook Pro doesn't give any reaction when pressing the power button

    - by Juri
    An hour ago I closed the display my Macbook Pro. it goes into sleep mode. After dinner I returned, opened the display and wanted to continue with my work, but I recognized it was switched off completely. I tried to press the power button and received nothing. I also noticed that the green light on the power supply plug which is plugged into my Macbook is off. Same thing with a power supply from the Mac of a friend of mine. What could I try? Some suggestions? What could be the problem here?? I already tried using the battery to start, no success, also taking the battery out completely, no success. Even if I press the small button for showing the current battery charge, none of the leds starts. It's like the Mac is completely dead.

    Read the article

  • Laptop not charging when connected to mains outlet

    - by Josh
    I've had this laptop for a few weeks now, it's a Sony Vaio. I went to charge it a few days ago and plugged in the power cable, but it's not charging. The battery icon in the Windows taskbar to the bottom right says it's plugged in and charging, but the charge level never goes above 2%. I have checked and I don't have a hcarging switch on the laptop anywhere, so it should be charging. If I unplug the cable, the laptop runs out of power within 30 seconds or so, further fueling my thought that it's a faulty battery. Anyone have any bright ideas? If this doesn't get fixed I'll just ring up Sony and get them to send me a replacement battery or something. Thanks.

    Read the article

  • Why can't add a hot spare in freebsd? Can anybody help me fix it?

    - by hamlet
    Why can't add a hot spare? Can anybody help me fix it? mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available My mfi status:: mfiutil show config mfi0 Configuration: 1 arrays, 1 volumes, 0 spares array 0 of 2 drives: drive 0 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWHSB4C> SAS enclosure 1, slot 0 drive 1 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWJ3AEC> SAS enclosure 1, slot 1 volume mfid0 (136G) RAID-1 64K OPTIMAL spans: array 0 mfiutil show events 1468 (boot + 25s/BATTERY/WARN) - Battery removed 1475 (boot + 52s/DRIVE/WARN) - PD 00(e1/s0) is not a certified drive 1478 (boot + 52s/DRIVE/WARN) - PD 01(e1/s1) is not a certified drive 1480 (boot + 64s/BATTERY/WARN) - BBU disabled; changing WB virtual disks to WT mfiutil show volumes mfi0 Volumes: Id Size Level Stripe State Cache Name mfid0 ( 136G) RAID-1 64K OPTIMAL Disabled

    Read the article

  • Disable of discrete/native graphics on MacBook Retina when using apps like VMware, VLC, etc

    - by badkitteh
    I got a MacBook Pro Retina a few months ago and I'm really happy with it. However, since I do a lot of work in different environments/OSes, I make heavy use of VMware to have them with me when I'm on the road. The MBPr has a great battery life - as long as integrated graphics are being used. Unfortunately as soon as I launch VMware, the MacBook switches to discrete graphics and battery life is effectively halved. I noticed that after installing gfxCardStatus, and now I'm wondering if there is a way to force the integrated graphics being used all of the time, so I can enjoy maximum battery life. Thanks.

    Read the article

  • USB port causing device problems after new motherboard upgrade

    - by enbuyukfener
    I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

    Read the article

  • Request exceeded the limit of 10

    - by Webnet
    My logs are FULL of [Tue Jan 11 10:20:45 2011] [error] [client 99.162.115.123] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: https://www.domain.com/vehicles/Chevrolet/Uplander/2006 The problem is when I enable LogLevel debug we get HUGE error logs because all of our traffic is SSL. From what I can tell the file doesn't record these errors anymore, either that or it's so buried in SSL logs that I just can't find them. Here's my .htaccess Options -indexes RewriteEngine On RewriteRule ^battery/([^/]+)$ /browser/product?sku=BATTERY+$1&type=battery RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/product([0-9]+)$ /browser/index.php?make=$1&model=$2&id=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/([0-9]+)$ /browser/product.php?make=$1&model=$2&year=$3&id=$4&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)$ /store/product/list.php?make=$1&model=$2&year=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)$ /vehicle/make/model/year/list.php?make=$1&model=$2&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)$ /vehicle/make/model/list.php?make=$1&%{QUERY_STRING} [L,NC]

    Read the article

  • Asus Eee-PC 1015PEM

    - by Bianka
    My Asus worked perfectly until yesterday. I assume that the battery drained and AC was not plugged. I turned it on and doesn't chargeat all. It seems that something wrong with my battery. It works from AC but when it is plugged it shows only 4% available charging. When I unplug AC it shuts down right away. I already tried the 45 seconds holding power button method, and I uninstalled in device manager Microsoft ACPI-compliant Method Battery. Nothing helped. Does anybody has any idea?

    Read the article

  • Udev webcam rule read, but not respected?

    - by user89305
    I have two usb-webcams on them machine, but at bot they some switch /dev/video number. The solution to this problem seems to be new udev rule. I have added this rule in/etc/udev/rules.d/jj-video.rules: Fix webcam 1 KERNEL=="video1", SUBSYSTEM=="video4linux", SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d6b", ATTRS{idProduct}=="0001", SYMLINK+="webcam1" Fix webcam 2 KERNEL=="video2", SUBSYSTEM=="video4linux", ATTR{name}=="Logitech QuickCam Pro 3000", KERNELS=="0000:00:1d.0", SUBSYSTEMS=="pci", DRIVERS=="uhci_hcd", ATTRS{vendor}=="0x8086", ATTRS##{device}=="0x2658", SYMLINK+="webcam2" but the symlinks are not created. I have tried many different combinations in this file. The present ones are just my lates attempts. I found the parameters in: jjk@eee-old:~$ udevadm info -a -p $(udevadm info -q path -p /class/video4linux/video1) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1': KERNEL=="video1" SUBSYSTEM=="video4linux" DRIVER=="" ATTR{name}=="Logitech QuickCam Pro 3000" ATTR{index}=="0" ATTR{button}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0': KERNELS=="2-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="Philips webcam" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 9" ATTRS{bNumEndpoints}=="02" ATTRS{bInterfaceClass}=="0a" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2': KERNELS=="2-2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 3" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="a0" ATTRS{bMaxPower}=="500mA" ATTRS{urbnum}=="371076" ATTRS{idVendor}=="046d" ATTRS{idProduct}=="08b0" ATTRS{bcdDevice}=="0002" ATTRS{bDeviceClass}=="00" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="2" ATTRS{devpath}=="2" ATTRS{version}==" 1.10" ATTRS{maxchild}=="0" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{serial}=="01402100A5000000" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2': KERNELS=="usb2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bMaxPower}==" 0mA" ATTRS{urbnum}=="34" ATTRS{idVendor}=="1d6b" ATTRS{idProduct}=="0001" ATTRS{bcdDevice}=="0302" ATTRS{bDeviceClass}=="09" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="1" ATTRS{devpath}=="0" ATTRS{version}==" 1.10" ATTRS{maxchild}=="2" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{manufacturer}=="Linux 3.2.0-29-generic uhci_hcd" ATTRS{product}=="UHCI Host Controller" ATTRS{serial}=="0000:00:1d.0" ATTRS{authorized_default}=="1" looking at parent device '/devices/pci0000:00/0000:00:1d.0': KERNELS=="0000:00:1d.0" SUBSYSTEMS=="pci" DRIVERS=="uhci_hcd" ATTRS{vendor}=="0x8086" ATTRS{device}=="0x2658" ATTRS{subsystem_vendor}=="0x1043" ATTRS{subsystem_device}=="0x82d8" ATTRS{class}=="0x0c0300" ATTRS{irq}=="23" ATTRS{local_cpus}=="ff" ATTRS{local_cpulist}=="0-7" ATTRS{dma_mask_bits}=="32" ATTRS{consistent_dma_mask_bits}=="32" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="" looking at parent device '/devices/pci0000:00': KERNELS=="pci0000:00" SUBSYSTEMS=="" DRIVERS=="" jjk@eee-old:~$ And tested the setup: sudo udevadm --debug test /sys/class/video4linux/video1 main: runtime dir '/run/udev' run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-gnupg.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-hplip.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ia64.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-inputattach.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libgphoto2-2.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libsane.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ppc.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-xserver-xorg-video-intel.rules' as rules file parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-firmware.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/lib/udev/rules.d/55-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/56-hpmud_support.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file parse_file: reading '/lib/udev/rules.d/64-xorg-xkb.rules' as rules file parse_file: reading '/lib/udev/rules.d/66-xorg-synaptics-quirks.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 parse_file: reading '/lib/udev/rules.d/69-libmtp.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xorg-vmmouse.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xserver-xorg-input-wacom.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-printers.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-ericsson-mbm.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-longcheer-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-nokia-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-pcmcia-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-platform-serial-whitelist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-qdl-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-simtech-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-x22x-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-zte-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-graphics-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-mm-candidate.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-brltty.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hdparm.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hplj10xx.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-keyboard-configuration.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-regulatory.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-restore.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-ucm.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-libgpod.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file parse_file: reading '/etc/udev/rules.d/jj-video.rules' as rules file udev_rules_new: rules use 259284 bytes tokens (21607 * 12 bytes), 37913 bytes buffer udev_rules_new: temporary index used 67520 bytes (3376 * 20 bytes) udev_device_new_from_syspath: device 0x215103e0 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_new_from_syspath: device 0x21510758 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_read_db: device 0x21510758 filled with db file data udev_device_new_from_syspath: device 0x21510e10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' udev_device_new_from_syspath: device 0x21511b10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2' udev_device_new_from_syspath: device 0x215132f8 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2' udev_device_new_from_syspath: device 0x21513650 has devpath '/devices/pci0000:00/0000:00:1d.0' udev_device_new_from_syspath: device 0x21513980 has devpath '/devices/pci0000:00' udev_rules_apply_to_event: GROUP 44 /lib/udev/rules.d/50-udev-default.rules:29 udev_rules_apply_to_event: IMPORT 'v4l_id /dev/video1' /lib/udev/rules.d/60-persistent-v4l.rules:7 udev_event_spawn: starting 'v4l_id /dev/video1' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_VERSION=2' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_PRODUCT=Logitech QuickCam Pro 3000' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_CAPABILITIES=:capture:' spawn_wait: 'v4l_id /dev/video1' [2609] exit with return code 0 udev_rules_apply_to_event: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-v4l.rules:9 builtin_usb_id: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0: if_class 10 protocol 0 udev_builtin_add_property: ID_VENDOR=046d udev_builtin_add_property: ID_VENDOR_ENC=046d udev_builtin_add_property: ID_VENDOR_ID=046d udev_builtin_add_property: ID_MODEL=08b0 udev_builtin_add_property: ID_MODEL_ENC=08b0 udev_builtin_add_property: ID_MODEL_ID=08b0 udev_builtin_add_property: ID_REVISION=0002 udev_builtin_add_property: ID_SERIAL=046d_08b0_01402100A5000000 udev_builtin_add_property: ID_SERIAL_SHORT=01402100A5000000 udev_builtin_add_property: ID_TYPE=generic udev_builtin_add_property: ID_BUS=usb udev_builtin_add_property: ID_USB_INTERFACES=:0aff00:010100:010200: udev_builtin_add_property: ID_USB_INTERFACE_NUM=00 udev_builtin_add_property: ID_USB_DRIVER=Philips webcam udev_rules_apply_to_event: LINK 'v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:10 udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-v4l.rules:16 udev_builtin_add_property: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 udev_builtin_add_property: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 udev_rules_apply_to_event: LINK 'v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:17 udev_rules_apply_to_event: RUN 'udev-acl --action=$env{ACTION} --device=$env{DEVNAME}' /lib/udev/rules.d/70-udev-acl.rules:74 udev_rules_apply_to_event: LINK 'webcam1' /etc/udev/rules.d/jj-video.rules:2 udev_event_execute_rules: no node name set, will use kernel supplied name 'video1' udev_node_add: creating device node '/dev/video1', devnum=81:1, mode=0660, uid=0, gid=44 udev_node_mknod: preserve file '/dev/video1', because it has correct dev_t udev_node_mknod: preserve permissions /dev/video1, 020660, uid=0, gid=44 node_symlink: preserve already existing symlink '/dev/char/81:1' to '../video1' link_find_prioritized: found 'c81:2' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' udev_device_new_from_syspath: device 0x21516748 has devpath '/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/video4linux/video2' udev_device_read_db: device 0x21516748 filled with db file data link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' link_update: creating link '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' to '/dev/video1' node_symlink: atomically replace '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-path\x2fpci-0000:00:1d.0-usb-0:2:1.0-video-index0' link_update: creating link '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '../../video1' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/webcam1' link_update: creating link '/dev/webcam1' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/webcam1' to 'video1' udev_device_update_db: created db file '/run/udev/data/c81:1' for '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' ACTION=add COLORD_DEVICE=1 COLORD_KIND=camera DEVLINKS=/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0 /dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0 /dev/webcam1 DEVNAME=/dev/video1 DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1 ID_BUS=usb ID_MODEL=08b0 ID_MODEL_ENC=08b0 ID_MODEL_ID=08b0 ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 ID_REVISION=0002 ID_SERIAL=046d_08b0_01402100A5000000 ID_SERIAL_SHORT=01402100A5000000 ID_TYPE=generic ID_USB_DRIVER=Philips webcam ID_USB_INTERFACES=:0aff00:010100:010200: ID_USB_INTERFACE_NUM=00 ID_V4L_CAPABILITIES=:capture: ID_V4L_PRODUCT=Logitech QuickCam Pro 3000 ID_V4L_VERSION=2 ID_VENDOR=046d ID_VENDOR_ENC=046d ID_VENDOR_ID=046d MAJOR=81 MINOR=1 SUBSYSTEM=video4linux TAGS=:udev-acl: UDEV_LOG=6 USEC_INITIALIZED=18213768 run: 'udev-acl --action=add --device=/dev/video1' jjk@eee-old:~$ (and correspondingly for video2) It looks to me like my rules are read, but not respected. What am I doing wrong?

    Read the article

  • MightyMintyBoost Is a 3-in-1 Gadget Charger

    - by ETC
    If you’re looking for a versatile battery booster, this DIY 3-in-1 solar/usb/wall current charger known as the MightyMintyBoost will top of your phone, mp3 player, and other gadgets with ease. Instructables user Honus didn’t just build the MightMintyBoost to geek out and show off his electronics project skills (although it’s certainly a nifty little project to do so), he’s serious about solar power and the impact clean energy has: Apple has sold over 30 million iPodTouch/iPhone units- imagine charging all of them via solar power…. If every iPhone/iPodTouch sold was fully charged every day (averaging the battery capacity) via solar power instead of fossil fuel power we would save approximately 50.644gWh of energy, roughly equivalent to 75,965,625 lbs. of CO2 in the atmosphere per year. Granted that’s a best case scenario (assuming you can get enough sunlight per day and approximately 1.5 lbs. CO2 produced per kWh used.) Of course, that doesn’t even figure in all the other iPods, cell phones, PDAs, microcontrollers (I use it to power my Arduino projects) and other USB devices that can be powered by this charger- one little solar cell charger may not seem like it can make a difference but add all those millions of devices together and that’s a lot of energy! His MightyMintyBoost is a battery booster for devices that can charge via USB and it accepts incoming current from the solar panel on top (or, on cloudy days can be charged via a wall charger or the USB port on your computer). Hit up the link below to see his full build guide and create your own MightyMintyBoost. MightyMintyBoost [Instructables] Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper

    Read the article

  • How does one find out which application is associated with an indicator icon in Ubuntu 12.04?

    - by Amos Annoy
    It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? (the examination of SM points out a rather poignant factor in the faster depletion and shortened run time on battery - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously it was well under 10% in 10.04, between 5% and 7%!) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators

    Read the article

  • Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

    - by Virulan
    Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

    Read the article

  • Colors less saturated in Snow Leopard Finder, Preview & Safari than in Chrome -- why?

    - by Andrew Swift
    If I look at the picture here in Safari, Preview or the finder, the shades of blue are significantly different than if I look at the picture in Google Chrome (they are less saturated than in Chrome). Since I am a photographer and need to prepare pictures for publication online, I need to know what a jpeg should really look like, in order to color-correct it. I have an excellent Eizo monitor that is correctly calibrated. If I open the same image in Photoshop CS3, I get the Chrome colors if I use Monitor RGB under view proof setup, and I get the Safari colors if I use Macintosh RGB. Can anyone explain the difference between these two settings, and the difference between Safari and Chrome? Which colors are correct? Photos that I prepared under Windows (during the past five years) now seem washed out in the Apple Finder and Preview, even though I had correctly prepared them. Is there a setting on the Macintosh for color calibration, besides the monitor calibration control panel?

    Read the article

  • Monitor System Resources from the Windows 7 Taskbar

    - by Asian Angel
    The problem with most system monitoring apps is that they get covered up with all of your open windows, but you can solve that problem by adding monitoring apps to the Taskbar. Setting Up & Using SuperbarMonitor All of the individual monitors and the .dll files necessary to run them come in a single zip file for your convenience. Simply unzip the contents, add them to an appropriate “Program Files Folder”, and create shortcuts for the monitors that you would like to use on your system. For our example we created shortcuts for all five monitors and set the shortcuts up in their own “Start Menu Folder”. You can see what the five monitors (Battery, CPU, Disk, Memory, & Volume) look like when running…they are visual in appearance without text to clutter up the looks. The monitors use colors (red, green, & yellow) to indicate the amount of resources being used for a particular category. Note: Our system is desktop-based but the “Battery Monitor” was shown for the purposes of demonstration…thus the red color seen here. Hovering the mouse over the “Battery, CPU, Disk, & Memory Monitors” on our system displayed a small blank thumbnail. Note: The “Battery Monitor” may or may not display more when used on your laptop. Going one step further and hovering the mouse over the thumbnails displayed a small blank window. There really is nothing that you will need to worry with outside of watching the color for each individual monitor. Nice and simple! The one monitor with extra features on the thumbnail was the “Volume Monitor”. You can turn the volume down, up, on, or off from here…definitely useful if you have been wanting to hide the “Volume Icon” in the “System Tray”. You can also pin the monitors to your “Taskbar” if desired. Keep in mind that if you do close any of the monitors they will “temporarily” disappear from the “Taskbar” until the next time they are started. Note: If you want the monitors to start with your system each time you will need to add the appropriate shortcuts to the “Startup Sub-menu” in your “Start Menu”. Conclusion If you have been wanting a nice visual way to monitor your system’s resources then SuperbarMonitor is definitely worth trying out. Links Download SuperbarMonitor Similar Articles Productive Geek Tips Monitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersUse Windows Vista Reliability Monitor to Troubleshoot CrashesTaskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick)How To Fix System Tray Tooltips Not Displaying in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

    Read the article

  • The best computer ever

    - by Jeff
    (This is a repost from my personal blog… wow… I need to write more technical stuff!) About three years and three months ago, I bought a 17" MacBook Pro, and it turned out to be the best computer I've ever owned. You might think that every computer with better specs is automatically better than the last, but that hasn't been my experience. My first one was a Sony, back in the Pentium III days, and it cost an astonishing $2,500. That was even more ridiculous in 1999 dollars. It had a dial-up modem, and a CD-ROM, built-in! It may have even played DVD's. A few years later I bought an HP, and it ended up being a pile of shit. The power connector inside came loose from the board, and on occasion would even short. In 2005, I bought a Dell, and it wasn't bad. It had a really high resolution screen (complete with dead pixels, a problem in those days), and it was the first laptop I felt I could do real work on. When 2006 rolled around, Apple started making computers with Intel CPU's, and I bought the very first one the week it came out. I used Boot Camp to run Windows. I still have it in its box somewhere, and I used it for three years. The current 17" was new in 2009. The goodness was largely rooted in having a big screen with lots of dots. This computer has been the source of hundreds of blog posts, tens of thousands of lines of code, video and photo editing, and of course, a whole lot of Web surfing. It connected to corpnet at Microsoft, WiFi in Hawaii and has presented many a deck. It has traveled with me tens of thousands of miles. Last year, I put a solid state drive in it, and it was like getting a new computer. I can boot up a Windows 7 VM in about 19 seconds. Having 8 gigs of RAM has always been fantastic. Everything about it has been fast and fun. When new, the battery (when not using VM's) could get as much as 10 hours. I can still do 7 without much trouble. After 460 charge cycles, the battery health is still between 85 and 90%. The only real negative has been the size and weight. It's only an inch thick, but naturally it's pretty big with a 17" screen. You don't get battery life like that without a huge battery, either, so it's heavy. It was never a deal breaker, but sometimes a long haul across a large airport, you know you're carrying it. Today, Apple announced a new, thinner and lighter 15" laptop, with twice the RAM and CPU cores, and four times the screen resolution. It basically handles my size and weight issues while retaining the resolution, and it still costs less than my 17" did. So I ordered one. Three years is an excellent run, but I kind of budgeted for a new workhorse this year anyway. So if you're interested in a 17" MacBook Pro with a Core 2 Duo 2.66 GHz CPU, 8 gigs of RAM and a 320 gig hard drive (sorry, I'm keeping the SSD), I have one to sell. They've apparently discontinued the 17", which is going to piss off the video community. It's in excellent condition, with a few minor scratches, but I take care of my stuff.

    Read the article

  • Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

    - by Brian
    How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

    Read the article

  • Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

    - by Ankit
    Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

    Read the article

  • The Koyal Group Info Mag News¦Charged building material could make the renewable grid a reality

    - by Chyler Tilton
    What if your cell phone didn’t come with a battery? Imagine, instead, if the material from which your phone was built was a battery. The promise of strong load-bearing materials that can also work as batteries represents something of a holy grail for engineers. And in a letter published online in Nano Letters last week, a team of researchers from Vanderbilt University describes what it says is a breakthrough in turning that dream into an electrocharged reality. The researchers etched nanopores into silicon layers, which were infused with a polyethylene oxide-ionic liquid composite and coated with an atomically thin layer of carbon. In doing so, they created small but strong supercapacitor battery systems, which stored electricity in a solid electrolyte, instead of using corrosive chemical liquids found in traditional batteries. These supercapacitors could store and release about 98 percent of the energy that was used to charge them, and they held onto their charges even as they were squashed and stretched at pressures up to 44 pounds per square inch. Small pieces of them were even strong enough to hang a laptop from—a big, fat Dell, no less. Although the supercapacitors resemble small charcoal wafers, they could theoretically be molded into just about any shape, including a cell phone’s casing or the chassis of a sedan. They could also be charged—and evacuated of their charge—in less time than is the case for traditional batteries. “We’ve demonstrated, for the first time, the simple proof-of-concept that this can be done,” says Cary Pint, an assistant professor in the university’s mechanical engineering department and one of the authors of the new paper. “Now we can extend this to all kinds of different materials systems to make practical composites with materials specifically tailored to a host of different types of applications. We see this as being just the tip of a very massive iceberg.” Pint says potential applications for such materials would go well beyond “neat tech gadgets,” eventually becoming a “transformational technology” in everything from rocket ships to sedans to home building materials. “These types of systems could range in size from electric powered aircraft all the way down to little tiny flying robots, where adding an extra on-board battery inhibits the potential capability of the system,” Pint says. And they could help the world shift to the intermittencies of renewable energy power grids, where powerful batteries are needed to help keep the lights on when the sun is down or when the wind is not blowing. “Using the materials that make up a home as the native platform for energy storage to complement intermittent resources could also open the door to improve the prospects for solar energy on the U.S. grid,” Pint says. “I personally believe that these types of multifunctional materials are critical to a sustainable electric grid system that integrates solar energy as a key power source.”

    Read the article

  • Power management on Android -- is app CPU correlated to power usage? [closed]

    - by foampile
    2 questions: Is application CPU usage on Android correlated and how highly to battery usage? In other words, are apps that suck a lot of CPU also draining the battery or not necessarily? Is there a way to itemize and display the phone's power use by application, at any given point in time as well as within defined time buckets and maybe view charts and such? Sort of like a diagnostic monitor for power usage by application or system component? Thanks

    Read the article

  • How to Stop Charging IPod Touch

    - by itsaboutcode
    Most of the time when I sync my IPOD touch, its battery gets filled up but sync is not complete and sign on the battery changes which means I should unplug it, should I do it? I mean it's in the middle of sync and if I unplug it, it can lose some data or have some other problem. So what is the way to stop it charging when it is plugged in but I don't want it to get charged?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >