Search Results

Search found 471 results on 19 pages for 'delayed durability'.

Page 16/19 | < Previous Page | 12 13 14 15 16 17 18 19  | Next Page >

• How do I use has_many :through and in_place_edit?

  - by Angela

  I have two Models: Campaign and Contact. A Campaign has_many Contacts. A Contact has_many Campaigns. Currently, each Contact has a contact.date_entered attribute. A Campaign uses that date as the ate to count down to the different Events that belong_to the Campaign. However, there are situations where a Campaign for a specific Contact may need to be delayed by X number of days. In this instance, the campaigncontact.delaydays = 10. In some cases, the Campaign must be stopped altogether for the specific Contact, so for now I set campaigncontact.delaydays = 1. (Are there major problems with that?) By default, I am assuming that no campaigncontact exists (but not sure how that works?) So here's what I've tried to do: class Contact < ActiveRecord::Base has_many :campaigncontacts has_many :campaigns, :through => :campaigncontacts end class Campaign < ActiveRecord::Base has_many :campaigncontacts has_many :contacts, :through => :campaigncontacts end script/generate model campaigncontact campaign_id:integer contact_id:integer delaydays:integer class Campaigncontact < ActiveRecord::Base belongs_to :campaign belongs_to :contact end So, here's the question: Is the above correct? If so, how do I allow a user to edit the delay of a campaign for a specific Contact. For now, I want to do so from the Contact View. This is what I tried: In the Contact controller (?) in_place_edit_for :campaigncontact, column.delaydays And in the View <%= in_place_editor_field :campaigncontact, :delaydays %> How can I get it right?

  Read the article

• postfix cannot getting my domain name?

  - by Kossel

  Hi I'm trying to setup webmin+postfix+dovecot+roundcube, for this moment I want things be as simple as possible so I'm using linux users as email accounts. I can send/receive from the same domain, I mean [email protected] can send/receive to/from [email protected] I tested smtp/imap with outlook and says no problem. if I send a mail from gmail it reject with error of: Technical details of temporary failure: The recipient server did not accept our requests to connect. when I login with roundcube the email address display in the right corner is something like user1@com and I get this error message from logs: [11-Nov-2012 07:39:03 +0400]: IMAP Error: Login failed for user1 from 187.150.xx.xx. Could not connect to com:143: php_network_getaddresses: getaddrinfo failed: Name or service not known in /var/www/webmail/program/include/rcube_imap.php on line 191 (POST /webmail/?_task=login&_action=login) it says Could not connect to com:143 looks like it cannot read the domain name. I used http://mxtoolbox.com/ to check the mx record and it says it can find the server of mail.mydomain.com. I quit sure the problema is from postfix or my server configs, but I have been looking for every config file and cannot find the answer of this. any suggestion I will appreciate. here are some of my configs (I don't want to make this question too long, I can provide any other information to solve this question): postfix main.cf #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_security_options = noanonymous smtpd_sasl_auth_enable = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = mydomain.com myhostname = mail.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $mydomain, $myhostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + virtual_alias_domains = mydomain.com smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated myorigin = $mydomain roundcube conf // ---------------------------------- // IMAP // ---------------------------------- $rcmail_config['default_host'] = '%d'; $rcmail_config['default_port'] = 143; $rcmail_config['imap_auth_type'] = null; $rcmail_config['imap_delimiter'] = null; $rcmail_config['imap_ns_personal'] = null; $rcmail_config['imap_ns_other'] = null; $rcmail_config['imap_ns_shared'] = null; $rcmail_config['imap_force_caps'] = false; $rcmail_config['imap_force_lsub'] = false; $rcmail_config['imap_force_ns'] = false; $rcmail_config['imap_timeout'] = 0; $rcmail_config['imap_auth_cid'] = null; $rcmail_config['imap_auth_pw'] = null; $rcmail_config['imap_cache'] = null; $rcmail_config['messages_cache'] = false;

  Read the article

• Postfix: Relay access denied

  - by Joseph Silvashy

  When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

  Read the article

• No login prompt displayed after updating Ubuntu 10.04, broken gdm

  - by cliff

  So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Postfix + SASLAUTHD + MySQL authentication problems

  - by Or W

  I've been trying to sort this out for the past 6 hours or so, this is the error message I'm facing (Running CentOS x64): /var/log/maillog: Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: SASL authentication failure: Password verification failed Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL PLAIN authentication failed: authentication failure Jun 22 20:42:49 ptroa postfix/smtpd[10130]: warning: bzq-79-177-192-133.red.bezeqint.net[79.177.192.133]: SASL LOGIN authentication failed: authentication failure /var/log/messages: Jun 22 20:15:38 ptroa saslauthd[9401]: do_auth : auth failure: [user=myuser] [service=smtp] [realm=domain.com] [mech=pam] [reason=PAM auth error] I have dovecot installed as well and I'm able to receive emails via the MySQL authentication. The problem is when I'm trying to use SMTP to send out emails. Some config files: /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = Server Message biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = domain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination virtual_create_maildirsize = yes virtual_maildir_extended = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_cano$ virtual_transport = dovecot dovecot_destination_recipient_limit = 1 /etc/default/saslauthd: START=yes DESC="SASL Authentication Daemon" NAME="saslauthd" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r" /etc/pam.d/smtp: #%PAM-1.0 #auth include password-auth #account include password-auth auth required pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1 account sufficient pam_mysql.so user=mail_admin passwd=password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 verbose=1

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• Does Test Driven Development (TDD) improve Quality and Correctness? (Part 1)

  - by David V. Corbin

  Since the dawn of the computer age, various methodologies have been introduced to improve quality and reduce cost. In this posting, I will by sharing my experiences with Test Driven Development; both its benefits and limitations. To start this topic, we need to agree on what TDD is. The first is to define each of the three words as used in this context. Test - An item or action which measures something in some quantifiable form. Driven - The primary motivation or focus of a series of activities (process) Development - All phases of a software project/product from concept through delivery. The above are very simple definitions that result in the following: "TDD is a process where the primary focus is on measuring and quantifying all aspects of the creation of a (software) product." There are many places where TDD is used outside of software development, even though it is not known by this name. Consider the (conventional) education process that most of us grew up on. The focus was to get the best grades as measured by different tests. Many of these tests measured rote memorization and not understanding of the subject matter. The result of this that many people graduated with high scores but without "quality and correctness" in their ability to utilize the subject matter (of course, the flip side is true where certain people DID understand the material but were not very good at taking this type of test). Returning to software development, let us look at some common scenarios. While these items are generally applicable regardless of platform, language and tools; the remainder of this post will utilize Microsoft Visual Studio and Team Foundation Server (TFS) for examples. It should be realized that everyone does at least some aspect of TDD. At the most rudimentary level, getting a program to compile involves a "pass/fail" measurement (is the syntax valid) that drives their ability to proceed further (run the program). Other developers may create "Unit Tests" in the belief that having a test for every method/property of a class and good code coverage is the goal of TDD. These items may be helpful and even important, but really only address a small aspect of the overall effort. To see TDD in a bigger view, lets identify the various activities that are part of the Software Development LifeCycle. These are going to be presented in a Waterfall style for simplicity, but each item also occurs within Iterative methodologies such as Agile/Scrum. the key ones here are: Requirements Gathering Architecture Design Implementation Quality Assurance Can each of these items be subjected to a process which establishes metrics (quantified metrics) that reflect both the quality and correctness of each item? It should be clear that conventional Unit Tests do not apply to all of these items; at best they can verify that a local aspect (e.g. a Class/Method) of implementation matches the (test writers perspective of) the appropriate design document. So what can we do? For each of area, the goal is to create tests that are quantifiable and durable. The ability to quantify the measurements (beyond a simple pass/fail) is critical to tracking progress(eventually measuring the level of success that has been achieved) and for providing clear information on what items need to be addressed (along with the appropriate time to address them - in varying levels of detail) . Durability is important so that the test can be reapplied (ideally in an automated fashion) over the entire cycle. Returning for a moment back to our "education example", one must also be careful of how the tests are organized and how the measurements are taken. If a test is in a multiple choice format, there is a significant statistical probability that a correct answer might be the result of a random guess. Also, in many situations, having the student simply provide a final answer can obscure many important elements. For example, on a math test, having the student simply provide a numeric answer (rather than showing the methodology) may result in a complete mismatch between the process and the result. It is hard to determine which is worse: The student who makes a simple arithmetric error at one step of a long process (resulting in a wrong answer) or The student who (without providing the "workflow") uses a completely invalid approach, yet still comes up with the right number. The "Wrong Process"/"Right Answer" is probably the single biggest problem in software development. Even very simple items can suffer from this. As an example consider the following code for a "straight line" calculation....Is it correct? (for Integral Points)         int Solve(int m, int b, int x) { return m * x + b; }   Most people would respond "Yes". But let's take the question one step further... Is it correct for all possible values of m,b,x??? (no fair if you cheated by being focused on the bolded text!)  Without additional information regarding constrains on "the possible values of m,b,x" the answer must be NO, there is the risk of overflow/wraparound that will produce an incorrect result! To properly answer this question (i.e. Test the Code), one MUST be able to backtrack from the implementation through the design, and architecture all the way back to the requirements. And the requirement itself must be tested against the stakeholder(s). It is only when the bounding conditions are defined that it is possible to determine if the code is "Correct" and has "Quality". Yet, how many of us (myself included) have written such code without even thinking about it. In many canses we (think we) "know" what the bounds are, and that the code will be correct. As we all know, requirements change, "code reuse" causes implementations to be applied to different scenarios, etc. This leads directly to the types of system failures that plague so many projects. This approach to TDD is much more holistic than ones which start by focusing on the details. The fundamental concepts still apply: Each item should be tested. The test should be defined/implemented before (or concurrent with) the definition/implementation of the actual item. We also add concepts that expand the scope and alter the style by recognizing: There are many things beside "lines of code" that benefit from testing (measuring/evaluating in a formal way) Correctness and Quality can not be solely measured by "correct results" In the future parts, we will examine in greater detail some of the techniques that can be applied to each of these areas....

  Read the article

• CodePlex Daily Summary for Sunday, September 29, 2013

  CodePlex Daily Summary for Sunday, September 29, 2013Popular ReleasesAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features -------- list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed ----- case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download end...Activity Viewer 2012: Activity Viewer 2012 V 5.0.0.3: Planning to add new features: 1. Import/Export rules 2. Tabular mode multi servers connections.Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...OfflineBrowser: Release v1.2: This release includes some multi-threading support, a better progress bar, more JavaScript fixes, and a help system. This release is also portable (can run with no issues from a flash drive).CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.0.0.34288 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-0-0-34288-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of ...CrmSvcUtil Generate Attribute Constants: Generate Attribute Constants (1.0.5018.28159): Built against version 5.0.15 of the CRM SDK Fixed issue where constant for primary key attribute was being duplicated in all entity classes Added ability to override base class for entity classesC# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen v2.1.3.api release: This is for the brave at heart, this is the maint release to update to the new movie api. please send feedback on fix requests.FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...Rawr: Rawr 5.4.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Sample MVC4 EF Codefirst Architecture: RazMVCWebApp ver 1.1: Signal R sample is added.CODE Framework: 4.0.30923.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.JayData -The unified data access library for JavaScript: JayData 1.3.2 - Indian Summer Edition: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.2 - Indian Summer Edition For detai...ZXing.Net: ZXing.Net 0.12.0.0: sync with rev. 2892 of the java version new PDF417 decoder improved Aztec decoder global speed improvements direct Kinect support for ColorImageFrame better Structured Append support many other small bug fixes and improvementsNew ProjectsCACHEDB: CLIENT-DATABASE || CLIENT_CACHEDB-DATABASEClassic WiX Burn Theme: A WiX Burn theme inspired by the classic WiX wizard user interface.CryptStr.Fody: A post-build weaver that encrypts literal strings in your .NET assemblies without breaking ClickOnce.Easy Code: A setting framework.EduSoft: This is a school eg.GameStuff: GameStuff is a library of Physics and Geometrics concepts for video game. Nekora Test Project: Nekora test projectPopCorn Console Game: Simple console gameRadioController: This project started from people installing Tablets in Mustangs. You would typically loose most control of the radio. This projects brings that back!Random searcher i pochodne: Wyszukiwarka plików multimedialnych i czego dusza zapragnie.SporkRandom: A .NET (C#, Visual Basic) interface for the true random number generator service of random.org

  Read the article

• SQL SERVER – Signal Wait Time Introduction with Simple Example – Wait Type – Day 2 of 28

  - by pinaldave

  In this post, let’s delve a bit more in depth regarding wait stats. The very first question: when do the wait stats occur? Here is the simple answer. When SQL Server is executing any task, and if for any reason it has to wait for resources to execute the task, this wait is recorded by SQL Server with the reason for the delay. Later on we can analyze these wait stats to understand the reason the task was delayed and maybe we can eliminate the wait for SQL Server. It is not always possible to remove the wait type 100%, but there are few suggestions that can help. Before we continue learning about wait types and wait stats, we need to understand three important milestones of the query life-cycle. Running - a query which is being executed on a CPU is called a running query. This query is responsible for CPU time. Runnable – a query which is ready to execute and waiting for its turn to run is called a runnable query. This query is responsible for Signal Wait time. (In other words, the query is ready to run but CPU is servicing another query). Suspended – a query which is waiting due to any reason (to know the reason, we are learning wait stats) to be converted to runnable is suspended query. This query is responsible for wait time. (In other words, this is the time we are trying to reduce). In simple words, query execution time is a summation of the query Executing CPU Time (Running) + Query Wait Time (Suspended) + Query Signal Wait Time (Runnable). Again, it may be possible a query goes to all these stats multiple times. Let us try to understand the whole thing with a simple analogy of a taxi and a passenger. Two friends, Tom and Danny, go to the mall together. When they leave the mall, they decide to take a taxi. Tom and Danny both stand in the line waiting for their turn to get into the taxi. This is the Signal Wait Time as they are ready to get into the taxi but the taxis are currently serving other customer and they have to wait for their turn. In other word they are in a runnable state. Now when it is their turn to get into the taxi, the taxi driver informs them he does not take credit cards and only cash is accepted. Neither Tom nor Danny have enough cash, they both cannot get into the vehicle. Tom waits outside in the queue and Danny goes to ATM to fetch the cash. During this time the taxi cannot wait, they have to let other passengers get into the taxi. As Tom and Danny both are outside in the queue, this is the Query Wait Time and they are in the suspended state. They cannot do anything till they get the cash. Once Danny gets the cash, they are both standing in the line again, creating one more Signal Wait Time. This time when their turn comes they can pay the taxi driver in cash and reach their destination. The time taken for the taxi to get from the mall to the destination is running time (CPU time) and the taxi is running. I hope this analogy is bit clear with the wait stats. You can check the Signalwait stats using following query of Glenn Berry. -- Signal Waits for instance SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%signal (cpu) waits], CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%resource waits] FROM sys.dm_os_wait_stats OPTION (RECOMPILE); Higher the Signal wait stats are not good for the system. Very high value indicates CPU pressure. In my experience, when systems are running smooth and without any glitch the Signal wait stat is lower than 20%. Again, this number can be debated (and it is from my experience and is not documented anywhere). In other words, lower is better and higher is not good for the system. In future articles we will discuss in detail the various wait types and wait stats and their resolution. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – Single Wait Time Introduction with Simple Example – Wait Type – Day 2 of 28

  - by pinaldave

  In this post, let’s delve a bit more in depth regarding wait stats. The very first question: when do the wait stats occur? Here is the simple answer. When SQL Server is executing any task, and if for any reason it has to wait for resources to execute the task, this wait is recorded by SQL Server with the reason for the delay. Later on we can analyze these wait stats to understand the reason the task was delayed and maybe we can eliminate the wait for SQL Server. It is not always possible to remove the wait type 100%, but there are few suggestions that can help. Before we continue learning about wait types and wait stats, we need to understand three important milestones of the query life-cycle. Running - a query which is being executed on a CPU is called a running query. This query is responsible for CPU time. Runnable – a query which is ready to execute and waiting for its turn to run is called a runnable query. This query is responsible for Single Wait time. (In other words, the query is ready to run but CPU is servicing another query). Suspended – a query which is waiting due to any reason (to know the reason, we are learning wait stats) to be converted to runnable is suspended query. This query is responsible for wait time. (In other words, this is the time we are trying to reduce). In simple words, query execution time is a summation of the query Executing CPU Time (Running) + Query Wait Time (Suspended) + Query Single Wait Time (Runnable). Again, it may be possible a query goes to all these stats multiple times. Let us try to understand the whole thing with a simple analogy of a taxi and a passenger. Two friends, Tom and Danny, go to the mall together. When they leave the mall, they decide to take a taxi. Tom and Danny both stand in the line waiting for their turn to get into the taxi. This is the Signal Wait Time as they are ready to get into the taxi but the taxis are currently serving other customer and they have to wait for their turn. In other word they are in a runnable state. Now when it is their turn to get into the taxi, the taxi driver informs them he does not take credit cards and only cash is accepted. Neither Tom nor Danny have enough cash, they both cannot get into the vehicle. Tom waits outside in the queue and Danny goes to ATM to fetch the cash. During this time the taxi cannot wait, they have to let other passengers get into the taxi. As Tom and Danny both are outside in the queue, this is the Query Wait Time and they are in the suspended state. They cannot do anything till they get the cash. Once Danny gets the cash, they are both standing in the line again, creating one more Single Wait Time. This time when their turn comes they can pay the taxi driver in cash and reach their destination. The time taken for the taxi to get from the mall to the destination is running time (CPU time) and the taxi is running. I hope this analogy is bit clear with the wait stats. You can check the single wait stats using following query of Glenn Berry. -- Signal Waits for instance SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%signal (cpu) waits], CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%resource waits] FROM sys.dm_os_wait_stats OPTION (RECOMPILE); Higher the single wait stats are not good for the system. Very high value indicates CPU pressure. In my experience, when systems are running smooth and without any glitch the single wait stat is lower than 20%. Again, this number can be debated (and it is from my experience and is not documented anywhere). In other words, lower is better and higher is not good for the system. In future articles we will discuss in detail the various wait types and wait stats and their resolution. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• XNA Notes 011

  - by George Clingerman

  Even with a lot of the XNA community working on Dream Build Play entries ( I swear I’m going to finish mine this year!) people are still finding time to do side projects and be amazingly active in the XNA and XBLIG community. With my one eye on my code and one eye on the community, here’s what I noticed these over achievers doing this past week! Time Critical XNA News: Xbox LIVE Indie Games sales data will be delayed March 17-20th due to some schedule maintenance http://create.msdn.com/en-us/news/indie_games_data_delay_march2011 GameMarx is releasing a series of videos to help raise donations for victims of the earthquakes and tsunami in Japan. Help out if you can! http://www.gamemarx.com/video/special/29/help-japan-sushido.aspx XNA MVPs: Catalin Zima shares his thoughts on the MVP summit and my book! http://www.catalinzima.com/2011/03/mvp-summit-2011/ Glenn Wilson (@mykre) helps the XNA team announce some new educational content that you don’t want to miss if you’re porting your app or game to Windows Phone 7 http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/653/Porting-your-App-or-Game-to-Windows-Phone-7.aspx and Windows Phone 7 from scratch http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/654/Windows-Phone-from-Scratch.aspx and shares a link to some free architectural models and textures http://twitter.com/#!/Mykre/status/46410160784158720 George (that’s me!) shares his MVP Summit 2011 summary and XBLIG thoughts http://geekswithblogs.net/clingermangw/archive/2011/03/15/144366.aspx XNA Developers: @SmallCaveGames shares a Code of Ethics for Xbox LIVE Indie Game Developers http://smallcavegames.blogspot.com/2011/03/unofficial-xblig-developers-code-of.html Derek S adds more Xbox LIVE Indie Game studios to his master list of XBLIG links http://twitter.com/#!/Mr_Deeke/status/46140996056125440 http://xbl-indieverse.blogspot.com/p/xblig-links.html Making games and want to help kids? Then share your story with GameFace: America! http://gameitupinitiative.com/about-the-initiative/programs/gameface-america/ Xbox LIVE Indie Games (XBLIG): XonaGames shares some video footage of their booth from GDC 2011 Video 1: http://youtu.be/lxIV9nk3Gq4 Video 2: http://youtu.be/GgfrjqkxR_o Video 3: http://youtu.be/yVcpXrTX7SQ Joystiq on Mommy’s Best Games Serious Sam Double D http://www.joystiq.com/2011/03/16/the-most-important-thing-about-serious-sam-double-d/ And The Escapist recommends that gamers start learning to avoid cleavage now http://www.escapistmagazine.com/news/view/108543-Boobie-Bomber-Makes-First-Appearance-in-Serious-Sam-Double-D Magiko Gaming started a blog on the XBLIG dashboard daily Top 10 games in the US. Good way to go back in time and look at the history of which games were in the the Top 10. http://dailytop10indiegames.wordpress.com/ Where are they going now? XBLIG developers at a crossroads.. http://www.gamesetwatch.com/2011/03/where_are_they_going_now_xblig.php http://www.gamasutra.com/view/news/33527/InDepth_Where_Are_They_Going_Now_XBLIG_Developers_At_A_Crossroads_.php BinaryTweed’s Clover: A Curious Tail is Xbox LIVE’s Deal of the Week! http://www.armlessoctopus.com/2011/03/15/what-luck-clover-a-curious-tale-is-half-price-this-week/ Looking for an Xbox LIVE Indie Game to buy? Writings of Mass Deduction has over 125 suggestions at this point! http://writingsofmassdeduction.com/ SkaStudios shares Vampire Smile Achievements AND their PAX East 2011 Both Setup video http://www.ska-studios.com/2011/03/14/vampire-smile-achievement/ http://www.ska-studios.com/2011/03/15/pax-booth-setup-time-lapse/ MasterBlud and VVGTV starts a new community for XBLIG developers and gamers to join http://vvgtv.forumotion.com/ Raymond Matthews (@DrakstarMatryx) covers Mommy’s Best Games getting Serious http://www.darkstarmatryx.com/?p=286 XNA Development: Dave Henry (@mort8088) posts the 4th tutorial in his series XNA 4.0 SpriteBatch extended http://mort8088.com/2011/03/11/xna-4-0-tutorial-4-spritebatch-extended/ Tutorial 5 - Creating a manual blank texture http://mort8088.com/2011/03/13/xna-4-tutorial-5-manual-blank-texture/ XNA 4.0 Tutorial 6 - Spritesheet Object http://mort8088.com/2011/03/18/xna-4-0-tutorial-6-spritesheet-object/ Jason Mitchell shares a tutorial on setting the alpha value for spritebatch in XNA 4.0 http://www.jason-mitchell.com/index.php/2011/03/13/setting-alpha-value-for-spritebatch-draw-in-xna-4/ XNA for Silverlight Developers: Part 7 - Collision Detection http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-7-Collision-detection.aspx Markus Ewald (@Cygon4) shares the full Ninject 2.0 binding for XNA and Sunburn http://twitter.com/#!/Cygon4/status/48330203826622464 Michael B. McLaughlin shares an AccelerometerInput XNA GameComponent he created (which I’m probably going to snag for a game I’m working on...) http://geekswithblogs.net/mikebmcl/archive/2011/03/17/accelerometerinput-xna-gamecomponent.aspx Extra Credit tackles the building of a good tutorial. Must watch for all Indie game devs (thanks for pointing it out Evan Johnson!) http://twitter.com/#!/johnsonevan/status/48452115680604160 http://www.escapistmagazine.com/videos/view/extra-credits/2921-Tutorials-101 ExEn is fully funded at this point so definitely something for XBLIG developers to keep an eye on as they consider releasing their games on other platforms http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight Channel 9 and Greg Duncan post Mixing the Game State Management and Platformer XNA Recipes http://channel9.msdn.com/coding4fun/blog/Mixing-the-Game-State-Management-and-Platformer-XNA-Recipes Sgt. Conker has noticed Mike McLaughlin has been crazy productive and has done a recap of his recent posts http://www.sgtconker.com/2011/03/recap-of-mikebmcls-posts/

  Read the article

• Connection Pooling is Busted

  - by MightyZot

  A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

  Read the article

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• Streaming desktop with avconv - severe sound issues

  - by Tommy Brunn

  I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

  Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Airline mess - what a journey

  - by Mike Dietrich

  What a day, what a journey ... Flew this noon from Munich to Zuerich for catch my ongoing flight to San Francisco with Swiss. And that day did start very well as Lufthansa messed up the connection flight by 42 minutes for a 35 minute flight. And as I was obviously the only passenger connection to San Francisco nobody picked me up at the airplane to bring me directly to my connection as Swiss did for the 8 passengers connection to Miami. So I missed my flight. What a start - and many thanks to Lufthansa. I was not the only one missing a connection as Lufthansa/Swiss had canceled the flight before due to "technical problems". In Zuerich Swiss did rebook me via Frankfurt with Lufthansa to board a United Airlines flight to San Francisco. "Ouch" I thought. I had my share of experience with United already as they've messed up my luggage on the way to San Francisco some years ago and it took them five (!!!) days to fly my bag over and deliver it. But actually it was the only option today. So I said "Yes". A big mistake as I've learned later on. The Frankfurt flight was delayed as well "due to a late incoming aircraft". But there was plenty of time. And I went to the Swiss counter at the gate and let them check if my baggage is on that flight to Frankfurt. They've said "Yes". Boarding the plane with a delay of 45 minutes (the typical Lufthansa delay these days) I spotted my Rimowa trolley right next to the plane on the airfield. So I was sure that it will be send to Frankfurt. In Frankfurt I went to the United counter once it did open - had to go through the passport check they do for US flights as well - and they've said "Yes, your luggage is with us". Well ... Arriving in San Francisco with just a bit of a some minutes delay and a very fast immigration procedure I saw the first bags with Priority tags getting pushed to the baggage claim - but mine was not there. I did wait ... and wait ... and wait. Well, thanks United, you did it again!!! I flew twice in the past years United Airlines - and in both cases they've messed up my luggage on the way to San Francisco. How lovely is that ... Now the real fun started again as the lady at the "Lost and Found" counter for luggage spotted my luggage in her system in Zuerich - and told me it's supposed to be sent with LH1191 to Frankfurt on Sept 27. But this was yesterday in Europe - it's already Sept 28 - and I saw my luggage in front of the airplane. So I'd suppose it's in Frankfurt already. But what could she do? Nothing but doing the awful paperwork. And "No Mr Dietrich, we don't call international numbers". Thank you, United. Next time I'll try to get a contract for a US land line in advance. They can't even tell you which plane will bring your luggage. It may be tomorrow with UA flight arriving around 4pm in SFO. I'm looking forward to some hours in the wonderful United Airlines call center waiting line. Last time I did spend 60-90 minutes every day until I got my luggage. If it takes again that long then OOW will be over by then. I love airline travel - and especially with United Airlines. And by the way ... they gave us these nice fancy packages during the flight:  That looks good - what's in that box??? Yes, really ... a bag of potato chips. Pure fat - very healthy.  I doubt that I'll ever fly United Airlines again!!!

  Read the article

• Hybrid IT or Cloud Initiative – a Perfect Enterprise Architecture Maturation Opportunity

  - by Ted McLaughlan

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} All too often in the growth and maturation of Enterprise Architecture initiatives, the effort stalls or is delayed due to lack of “applied traction”. By this, I mean the EA activities - whether targeted towards compliance, risk mitigation or value opportunity propositions – may not be attached to measurable, active, visible projects that could advance and prove the value of EA. EA doesn’t work by itself, in a vacuum, without collaborative engagement and a means of proving usefulness. A critical vehicle to this proof is successful orchestration and use of assets and investment resources to meet a high-profile business objective – i.e. a successful project. More and more organizations are now exploring and considering some degree of IT outsourcing, buying and using external services and solutions to deliver their IT and business requirements – vs. building and operating in-house, in their own data centers. The rapid growth and success of “Cloud” services makes some decisions easier and some IT projects more successful, while dramatically lowering IT risks and enabling rapid growth. This is particularly true for “Software as a Service” (SaaS) applications, which essentially are complete web applications hosted and delivered over the Internet. Whether SaaS solutions – or any kind of cloud solution - are actually, ultimately the most cost-effective approach truly depends on the organization’s business and IT investment strategy. This leads us to Enterprise Architecture, the connectivity between business strategy and investment objectives, and the capabilities purchased or created to meet them. If an EA framework already exists, the approach to selecting a cloud-based solution and integrating it with internal IT systems (i.e. a “Hybrid IT” solution) is well-served by leveraging EA methods. If an EA framework doesn’t exist, or is simply not mature enough to address complex, integrated IT objectives – a hybrid IT/cloud initiative is the perfect project to advance and prove the value of EA. Why is this? For starters, the success of any complex IT integration project - spanning multiple systems, contracts and organizations, public and private – depends on active collaboration and coordination among the project stakeholders. For a hybrid IT initiative, inclusive of one or more cloud services providers, the IT services, business workflow and data governance challenges alone can be extremely complex, requiring many diverse layers of organizational expertise and authority. Establishing subject matter expertise, authorities and strategic guidance across all the disciplines involved in a hybrid-IT or hybrid-cloud system requires top-level, comprehensive experience and collaborative leadership. Tools and practices reflecting industry expertise and EA alignment can also be very helpful – such as Oracle’s “Cloud Candidate Selection Tool”. Using tools like this, and facilitating this critical collaboration by leading, organizing and coordinating the input and expertise into a shared, referenceable, reusable set of authority models and practices – this is where EA shines, and where Enterprise Architects can be most valuable. The “enterprise”, in this case, becomes something greater than the core organization – it includes internal systems, public cloud services, 3rd-party IT platforms and datacenters, distributed users and devices; a whole greater than the sum of its parts. Through facilitated project collaboration, leading to identification or creation of solid governance models and processes, a durable and useful Enterprise Architecture framework will usually emerge by itself, if not actually identified and managed as such. The transition from planning collaboration to actual coordination, where the program plan, schedule and resources become synchronized and aligned to other investments in the organization portfolio, is where EA methods and artifacts appear and become most useful. The actual scope and use of these artifacts, in the context of this project, can then set the stage for the most desirable, helpful and pragmatic form of the now-maturing EA framework and community of practice. Considering or starting a hybrid-IT or hybrid-cloud initiative? Running into some complex relationship challenges? This is the perfect time to take advantage of your new, growing or possibly latent Enterprise Architecture practice.

  Read the article

• Error while starting Rails server

  - by Girish Anand

  Hello i am new to ruby and rails ... but when i am starting the rail server i am getting this error This is the error i am getting D:\mynewapp>ruby script/server = Booting WEBrick = Rails 2.3.5 application starting on http://0.0.0.0:3000 D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require': n such file to load -- rush (MissingSourceFile) from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inblock in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:521:in new_constants_in' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inrequire' from D:/mynewapp/vendor/gems/delayed_job-1.7.0/lib/delayed/worker.r 1:in <top (required)>' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inblock in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:521:in new_constants_in' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inrequire' from D:/mynewapp/vendor/gems/delayed_job-1.7.0/lib/delayed_job.rb:6 n <top (required)>' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inblock in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:521:in new_constants_in' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inrequire' from D:/mynewapp/config/environment.rb:39:in block in <top (requir )>' from D:/ruby/lib/ruby/gems/1.9.1/gems/rails-2.3.5/lib/initializer.rb:1 :inrun' from D:/mynewapp/config/environment.rb:9:in <top (required)>' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inblock in require' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:521:in new_constants_in' from D:/ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_s port/dependencies.rb:156:inrequire' from D:/ruby/lib/ruby/gems/1.9.1/gems/rails-2.3.5/lib/commands/server. :84:in <top (required)>' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from D:/ruby/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in require' from script/server:3:in' Any help will be appreciated Thanks in Advance

  Read the article

• RuntimeBinderException with dynamic in C# 4.0

  - by Terence Lewis

  I have an interface: public abstract class Authorizer<T> where T : RequiresAuthorization { public AuthorizationStatus Authorize(T record) { // Perform authorization specific stuff // and then hand off to an abstract method to handle T-specific stuff // that should happen when authorization is successful } } Then, I have a bunch of different classes which all implement RequiresAuthorization, and correspondingly, an Authorizer<T> for each of them (each business object in my domain requires different logic to execute once the record has been authorized). I'm also using a UnityContainer, in which I register various Authorizer<T>'s. I then have some code as follows to find the right record out of the database and authorize it: void Authorize(RequiresAuthorization item) { var dbItem = ChildContainer.Resolve<IAuthorizationRepository>() .RetrieveRequiresAuthorizationById(item.Id); var authorizerType = type.GetType(String.Format("Foo.Authorizer`1[[{0}]], Foo", dbItem.GetType().AssemblyQualifiedName)); dynamic authorizer = ChildContainer.Resolve(type) as dynamic; authorizer.Authorize(dbItem); } Basically, I'm using the Id on the object to retrieve it out of the database. In the background NHibernate takes care of figuring out what type of RequiresAuthorization it is. I then want to find the right Authorizer for it (I don't know at compile time what implementation of Authorizer<T> I need, so I've got a little bit of reflection to get the fully qualified type). To accomplish this, I use the non-generic overload of UnityContainer's Resolve method to look up the correct authorizer from configuration. Finally, I want to call Authorize on the authorizer, passing through the object I've gotten back from NHibernate. Now, for the problem: In Beta2 of VS2010 the above code works perfectly. On RC and RTM, as soon as I make the Authorize() call, I get a RuntimeBinderException saying "The best overloaded method match for 'Foo.Authorizer<Bar>.Authorize(Bar)' has some invalid arguments". When I inspect the authorizer in the debugger, it's the correct type. When I call GetType().GetMethods() on it, I can see the Authorize method which takes a Bar. If I do GetType() on dbItem it is a Bar. Because this worked in Beta2 and not in RC, I assumed it was a regression (it seems like it should work) and I delayed sorting it out until after I'd had a chance to test it on the RTM version of C# 4.0. Now I've done that and the problem still persists. Does anybody have any suggestions to make this work? Thanks Terence

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19  | Next Page >