Search Results

Search found 530 results on 22 pages for 'eof'.

Page 16/22 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• git clone fails with "index-pack" failed?

  - by gct

  So I created a remote repo that's not bare (because I need redmine to be able to read it), and it's set to be shared with the group (so git init --shared=group). I was able to push to the remote repo and now I'm trying to clone it. If I clone it over the net I get this: remote: Counting objects: 4648, done. remote: Compressing objects: 100% (2837/2837), done. error: git-upload-pack: git-pack-objects died with error.B/s fatal: git-upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed I'm able to clone it locally without a problem, and I ran "git fsck", which only reports some dangling trees/blobs, which I understand aren't a problem. What could be causing this? I'm still able to pull from it, just not clone. I should note the remote git version is 1.5.6.5 while local is 1.6.0.4 I tried cloning my local copy of the repo, stripping out the .git folder and pushing to a new repo, then cloning the new repo and I get the same error, which leads me to believe it may be a file in the repo that's causing git-upload-pack to fail... Edit: I have a number of windows binaries in the repo, because I just built the python modules and then stuck them in there so everyone else didn't have to build them as well. If I remove the windows binaries and push to a new repo, I can clone again, perhaps that gives a clue. Trying to narrow down exactly what file is causing the problem now.

  Read the article

• git clone fails with "index-pack" failed?

  - by gct

  So I created a remote repo that's not bare (because I need redmine to be able to read it), and it's set to be shared with the group (so git init --shared=group). I was able to push to the remote repo and now I'm trying to clone it. If I clone it over the net I get this: remote: Counting objects: 4648, done. remote: Compressing objects: 100% (2837/2837), done. error: git-upload-pack: git-pack-objects died with error.B/s fatal: git-upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed I'm able to clone it locally without a problem, and I ran "git fsck", which only reports some dangling trees/blobs, which I understand aren't a problem. What could be causing this? I'm still able to pull from it, just not clone. I should note the remote git version is 1.5.6.5 while local is 1.6.0.4 I tried cloning my local copy of the repo, stripping out the .git folder and pushing to a new repo, then cloning the new repo and I get the same error, which leads me to believe it may be a file in the repo that's causing git-upload-pack to fail... Edit: I have a number of windows binaries in the repo, because I just built the python modules and then stuck them in there so everyone else didn't have to build them as well. If I remove the windows binaries and push to a new repo, I can clone again, perhaps that gives a clue. Trying to narrow down exactly what file is causing the problem now.

  Read the article

• "Unable to open file", when the program tries to open file in /proc

  - by tristartom

  Hi, I try to read file /proc/'pid'/status, using c program. The code is as follows, and even I use sudo to run it, the prompt still keeps throwing "Unable to open file". Please let me know if you have any ideas on how to fix this. thanks Richard ... int main (int argc, char* argv[]) { string line; char* fileLoc; if(argc != 2) { cout << "a.out file_path" << endl; fileLoc = "/proc/net/dev"; } else { sprintf(fileLoc, "/proc/%d/status", atoi(argv[1])); } cout<< fileLoc << endl; ifstream myfile (fileLoc); if (myfile.is_open()) { while (! myfile.eof() ) { getline (myfile,line); cout << line << endl; } myfile.close(); } else cout << "Unable to open file"; return 0; }

  Read the article

• Hibernate JDBCConnectionException: Communications link failure and java.io.EOFException: Can not read response from server

  - by Marc

  I get a quite well-known using MySql jdbc driver : JDBCConnectionException: Communications link failure, java.io.EOFException: Can not read response from server. This is caused by the wait_timeout parameter in my.cnf. So I decided to use c3p0 pool connection along with Hibernate. Here is what I added to hibernate.cfg.xml : <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="c3p0.min_size">10</property> <property name="c3p0.max_size">100</property> <property name="c3p0.timeout">1000</property> <property name="c3p0.preferredTestQuery">SELECT 1</property> <property name="c3p0.acquire_increment">1</property> <property name="c3p0.idle_test_period">2</property> <property name="c3p0.max_statements">50</property> idle_test_period is volontarily low for test purposes. Looking at the mysql logs I can see the "SELECT 1" request which is regularly sent to the mysql server so it works. Unfortunately I still get this EOF exception within my app if I wait longer than 'wait_timout' seconds (set to 10 for test purposes). I'm using Hibernate 4.1.1 and mysql-jdbc-connector 5.1.18. So what am I doing wrong? Thanks, Marc.

  Read the article

• how to do bar chart in c

  - by user292489

  i have written a program that prints out the integers in the same order as the input with 5 numbers per line. That is, the first 5 integers will be printed in the first line; the next 5 integers in the next line; and so on. and also i was trying to print out the numbers in a bar chart formatt:like 81-105 ( 1) x 56-80 ( 5) xxxxx 6-11(5) xxxxx -1-5 (3) xxx my program: cntr=0; while (fscanf(in, "%d", &a[i]) != EOF) {i++; fprintf(out, "%d-%d (%d) %s\n", A, B, k, x, cntr); fprintf(out, "%d\n", k, cntr); fprintf(out, "x", a[i]); i++; } fprintf(out, "1864-2336 (%d)%s\n", k, x); fprintf(out, "1391-1863 (%d)%s\n", k, x); fprintf(out, "918-1390 (%d)%s\n", k, x); fprintf(out, "445-917 (%d)%s\n", k, x); fprintf(out,"-28-444 (%d)%s\n", k, x); fclose(in); fclose(out); return 0; } enter code here

  Read the article

• read text file in xcode

  - by danielDhobbs

  hello. i tried to read text file in xcode but this "EXC_BAD_ACCESS message showed up when i tried to build my program here is my code and i put inputA.txt file in the same folder with project file my friend told me that i should put txt file in debug folder is this why i cannot read txt file in this code? please help me... macbook user. int main (int argc, const char * argv[]) { FILE* fp; char mychar; char arr[50][2] = {0, }; int i = 0; int j, k; graphType* G_; G_ = (graphType*)malloc(sizeof(graphType)); Create(G_); fp = fopen("inputA.txt", "r"); //fp = fopen("inputB.txt", "r"); //fp = fopen("inputC.txt", "r"); while(1){ for(j = 0 ; j < 2 ; j++){ mychar = fgetc(fp); if(mychar == EOF) break; else if(mychar == ' ') continue; arr[i][j] = mychar; } i++; }

  Read the article

• Why is this exception thrown in the visual studio C compiler?

  - by Shane Larson

  Hello. I am trying to get more adept and my C programming and I was attempting to test out displaying a character from the input stream while inside of the loop that is getting the character. I am using the getchar() method. I am getting an exception thrown at the time that the printf statement in my code is present. (If I comment out the printf line in this function, the exception is not thrown). Exception: Unhandled exception at 0x611c91ad (msvcr90d.dll) in firstOS.exe: 0xC0000005: Access violation reading location 0x00002573. Here is the code... Any thoughts? Thank you. PS. I am using the stdio.h library. /*getCommandPromptNew - obtains a string command prompt.*/ void getCommandPromptNew(char s[], int lim){ int i, c; for(i=0; i < lim-1 && (c=getchar())!=EOF && c!='\n'; ++i){ s[i] = c; printf('%s', c); } }

  Read the article

• Do I have to allocate and free records when using TList<T> in Delphi?

  - by afrazier

  The question more or less says it all. Given the following record structure: type TPerson = record Name: string; Age: Integer; end; PPerson = ^TPerson; TPersonList = TList<TPerson>; Is the following code valid? procedure ReadPeople(DataSet: TDataSet; PersonList: TPersonList); begin PersonList.Count := DataSet.RecordCount; if DataSet.RecordCount = 0 then Exit; DataSet.First; while not DataSet.Eof do begin PersonList[DataSet.RecNo].Name := DataSet.FieldByName('Name').AsString; PersonList[DataSet.RecNo].Age := DataSet.FieldByName('Age').AsInteger; DataSet.Next; end; end; Do I have to use GetMem/FreeMem to allocate and free records an instance of TPersonList, or am I free to directly access the TPersonList entries directly? My gut says that the code should be valid, though I'm not sure if there's any wrinkles related to record initialization or finalization.

  Read the article

• Git repository gets corrupted when I do a large commit: "Possible repository corruption on the remot

  - by mindthief

  Hi All, A friend of mine and I have been trying to use git for a project. It is hosted on his server, and I git clone it as: git clone [email protected]:/path/to/git/repos.git Pretty standard stuff, and it works great for a while. But every time one of us has added a large commit (which git supposedly handles very well), of the order of 100MB or so, the git repository gets kind of broken. Basically, at this point I will be able to push new changes and pull other changes (I think), but when I try to clone the repository in a fresh location using that command above, I get an error message that says: $git clone [email protected]:/path/to/git/repos.git Initialized empty Git repository in /local/path/to/repos/.git/ remote: Counting objects: 1455, done. remote: Compressing objects: 100% (1235/1235), done. error: git upload-pack: git-pack-objects died with error.s fatal: git upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed This has happened 3 or 4 times now, and it's always when I add a large commit. Any idea why this is happening? How can we fix it? We're both using Mac OSX Snow Leopard. Thanks! -M

  Read the article

• visusal studio embedded crystal report keeps prompting database login?

  - by phill

  I'm using visual studio 2005 to develop a form with a combobox passing a value into the parameter of an embedded crystal report. I'm trying to figure out why it keeps prompting me for a database login every single time you try to run the report with a different combobox selection. Here is my code: private Sub Form1_load... Dim ConnName As String Dim ServerName As String Dim DBName As String Dim user As String Dim pass As String Dim gDBA As ADODB.Connection Dim records As ADODB.Recordset Dim datver As ADODB.Recordset Dim query As String '---OPEN THE DATABASE CONNECTIONS gDBA = New ADODB.Connection ': gDBA.CursorLocation = adUseServer 'Added to prevent time out error gDBA.CommandTimeout = 1000 : gDBA.ConnectionTimeout = 1000 gDBA.ConnectionString = "Server=svr13;Database=subscribers;User ID=KViews;Password=Solution;Trusted_Connection=True;" gDBA.Open("Data Source=Kaseya;Initial Catalog=subscribers;User Id=KViews;Password=Solution;", "KViews", "Solution") records = New ADODB.Recordset query = "select distinct groupname from _v_k order by groupname desc" 'records.ActiveConnection = gDBA.ConnectionString records.CursorType = CursorTypeEnum.adOpenForwardOnly records.LockType = LockTypeEnum.adLockReadOnly records.Open(query, gDBA) Do While Not records.EOF ComboBox1.Items.Add(records.Fields("groupname").Value) records.MoveNext() Loop end Sub Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim selected As String selected = ComboBox1.Text Dim cryRpt As New ReportDocument cryRpt.Load("C:\Visual Studio 2005\Projects\WindowsApplication1\WindowsApplication1\CrystalReport1.rpt") cryRpt.SetDatabaseLogon("KViews", "Solutions", "svr13", "subscribers") cryRpt.SetParameterValue("companyname", selected) CrystalReportViewer1.ReportSource = cryRpt CrystalReportViewer1.Refresh() End Sub I looked at this previous posting http://stackoverflow.com/questions/1132314/database-login-prompt-with-crystal-reports but this wasn't very helpful. I couldn't find where a CMC was to disable the prompt. Any ideas? thanks in advance

  Read the article

• Requested operation requires an OLE DB Session object... - Connecting Excel to SQL server via ADO

  - by Frank V

  I'm attempting to take Excel 2003 and connect it to SQL Server 2000 to run a few dynamicly generated SQL Queries which ultimately filling certain cells. I'm attempting to do this via VBA via ADO (I've tried 2.8 to 2.0) but I'm getting an error while setting the ActiveConnection variable which is inside the ADODB.Connection object. I need to resolve this pretty quick... Requested operation requires an OLE DB Session object, which is not supported by the current provider. I'm honestly not sure what this error means and right now I don't care. How can get this connection to succeed so that I can run my queries? Here is my VB code: Dim SQL As String, RetValue As String SQL = " select top 1 DateTimeValue from SrcTable where x='value' " 'Not the real SQL RetValue = "" Dim RS As ADODB.Recordset Dim Con As New ADODB.Connection Dim Cmd As New ADODB.Command Con.ConnectionString = "Provider=sqloledb;DRIVER=SQL Server;Data Source=Server\Instance;Initial Catalog=MyDB_DC;User Id=<UserName>;Password=<Password>;" Con.CommandTimeout = (60 * 30) Set Cmd.ActiveConnection = Con ''Error occurs here. ' I'm not sure if the rest is right. I've just coded it. Can't get past the line above. Cmd.CommandText = SQL Cmd.CommandType = adCmdText Con.Open Set RS = Cmd.Execute() If Not RS.EOF Then RetValue = RS(0).Value Debug.Print "RetValue is: " & RetValue End If Con.Close I imagine something is wrong with the connection string but I've tried over a dozen variations. Now I'm just shooting in the dark.... Note/Update: To make matters more confusing, if I Google for the error quote above, I get a lot of hits back but nothing seems relevant or I'm not sure what information is relevant.... I've got the VBA code in "Sheet1" under "Microsoft Excel Objects." I've done this before but usually put things in a module. Could this make a difference?

  Read the article

• Indentation control while developing a small python like language

  - by sap

  Hello, I'm developing a small python like language using flex, byacc (for lexical and parsing) and C++, but i have a few questions regarding scope control. just as python it uses white spaces (or tabs) for indentation, not only that but i want to implement index breaking like for instance if you type "break 2" inside a while loop that's inside another while loop it would not only break from the last one but from the first loop as well (hence the number 2 after break) and so on. example: while 1 while 1 break 2 'hello world'!! #will never reach this. "!!" outputs with a newline end 'hello world again'!! #also will never reach this. again "!!" used for cout end #after break 2 it would jump right here but since I don't have an "anti" tab character to check when a scope ends (like C for example i would just use the '}' char) i was wondering if this method would the the best: I would define a global variable, like "int tabIndex" on my yacc file that i would access in my lex file using extern. then every time i find a tab character on my lex file i would increment that variable by 1. when parsing on my yacc file if i find a "break" keyword i would decrement by the amount typed after it from the tabIndex variable, and when i reach and EOF after compiling and i get a tabIndex != 0 i would output compilation error. now the problem is, whats the best way to see if the indentation got reduced, should i read \b (backspace) chars from lex and then reduce the tabIndex variable (when the user doesn't use break)? another method to achieve this? also just another small question, i want every executable to have its starting point on the function called start() should i hardcode this onto my yacc file? sorry for the long question any help is greatly appreciated. also if someone can provide an yacc file for python would be nice as a guideline (tried looking on Google and had no luck). thanks in advance.

  Read the article

• Get Classic ASP variale from posted JSON

  - by Will

  I'm trying to post JSON via AJAX to a Classic ASP page, which retrieves the value, checks a database and returns JSON to the original page. I can post JSON via AJAX I can return JSON from ASP I can't retrieve the posted JSON into an ASP variable POST you use Request.Form, GET you use Request.Querystring......... what do I use for JSON? I have JSON libraries but they only show creating a string in the ASP script and then parsing that. I need to parse JSON from when being passed an external variable. Javascipt var thing = $(this).val(); $.ajax({ type: "POST", url: '/ajax/check_username.asp', data: "{'userName':'" + thing + "'}", contentType: "application/json; charset=utf-8", dataType: "json", cache: false, async: false, success: function() { alert('success'); }); ASP file (check_username.asp) Response.ContentType = "application/json" sEmail = request.form() -- THE PROBLEM Set oRS = Server.CreateObject("ADODB.Recordset") SQL = "SELECT SYSUserID FROM WCE_UK.dbo.t_SYS_User WHERE Username='"&sEmail&"'" oRS.Open SQL, oConn if not oRS.EOF then sStatus = (new JSON).toJSON("username", true, false) else sStatus = (new JSON).toJSON("username", false, false) end if response.write sStatus

  Read the article

• Kernighan & Ritchie word count example program in a functional language

  - by Frank

  I have been reading a little bit about functional programming on the web lately and I think I got a basic idea about the concepts behind it. I'm curious how everyday programming problems which involve some kind of state are solved in a pure functional programing language. For example: how would the word count program from the book 'The C programming Language' be implemented in a pure functional language? Any contributions are welcome as long as the solution is in a pure functional style. Here's the word count C code from the book: #include <stdio.h> #define IN 1 /* inside a word */ #define OUT 0 /* outside a word */ /* count lines, words, and characters in input */ main() { int c, nl, nw, nc, state; state = OUT; nl = nw = nc = 0; while ((c = getchar()) != EOF) { ++nc; if (c == '\n') ++nl; if (c == ' ' || c == '\n' || c = '\t') state = OUT; else if (state == OUT) { state = IN; ++nw; } } printf("%d %d %d\n", nl, nw, nc); }

  Read the article

• MS Access (Jet) transactions, workspaces & scope

  - by Eric G

  I am having trouble with committing a transaction (using Access 2003 DAO). It's acting as if I never had called BeginTrans -- I get error 3034 on CommitTrans, "You tried to commit or rollback a transaction without first beginning a transaction"; and the changes are written to the database (presumably because they were never wrapped in a transaction). However, BeginTrans is run, if you step through it. I am running it within the Access environment using the DBEngine(0) workspace. The tables I'm updating are all opened via a Jet database connection (to the same database) and updated using DAO.Recordset.update. The connection is opened before starting BeforeTrans. I'm not doing anything weird in the middle of the transaction like closing/opening connections or multiple workspaces etc. There is one nested transaction level (basically it's wrapping multiple transacted updates in an outer transaction, so if any fail they all fail). The inner transactions run without errors, it's the outer transaction that doesn't work. Here are a few things I've looked into and ruled out: The transaction is spread across several methods and BeginTrans and CommitTrans (and Rollback) are all in different places. But when I tried a simple test of running a transaction this way, it doesn't seem like this should matter. I thought maybe the database connection gets closed when it goes out of local scope, even though I have another 'global' reference to it (I'm never sure what DAO does with dbase connections to be honest). But this seems not to be the case -- right before the commit, the connection and its recordsets are alive (I can check their properties, EOF = False, etc.) My CommitTrans and Rollback are done within event callbacks. (Very basically, a parser program is throwing an 'onLoad' or 'onLoadFail' event at the end of parsing, which I am handling by either committing or rolling back the inserts I made during processing.) However, again, trying a simple test, it doesn't seem like this should matter. Any ideas why this isn't working for me? Thanks.

  Read the article

• HTML::TreeBuilder has mojibake problem, it shows wired chars in the output

  - by varun_vijay_r

  use strict; use WWW::Curl::Easy; use HTML::TreeBuilder; my $cookie_file ='/tmp/pcook'; my $curl = new WWW::Curl::Easy; my $response_body; my $charset = 'utf-8'; $DocOffline::charset = undef; $curl-setopt (CURLOPT_URL, 'http://www.breitbart.com/article.php?id=D9G7CR5O0&show_article=1'); $curl-setopt ( CURLOPT_USERAGENT, 'Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.9 (KHTML, like Gecko) Chrome/6.0.400.0 Safari/533.9'); $curl-setopt ( CURLOPT_HEADER, 0); $curl-setopt ( CURLOPT_FOLLOWLOCATION, 1); $curl-setopt ( CURLOPT_AUTOREFERER, 1); $curl-setopt ( CURLOPT_SSL_VERIFYPEER, 0); $curl-setopt ( CURLOPT_COOKIEFILE, $cookie_file); $curl-setopt ( CURLOPT_COOKIEJAR, $cookie_file); $curl-setopt ( CURLOPT_REFERER, 'http://www.iavian.com/docOff/'); $curl-setopt ( CURLOPT_HEADERFUNCTION, \&headerCallback ); open (my $fileb, "", \$response_body); $curl-setopt(CURLOPT_WRITEDATA,$fileb); my $retcode = $curl-perform; if ($retcode == 0) { my $dom_tree = HTML::TreeBuilder-new(); $dom_tree-ignore_elements(qw(script style)); $dom_tree-utf8_mode(1); $dom_tree-parse($response_body); $dom_tree-eof(); print $dom_tree-as_HTML('<&', ' ', {}); } else { print("An error happened: ".$curl-strerror($retcode)." ($retcode)\n"); } sub headerCallback { my($data, $pointer) = @_; $data =~ m/Content-Type:\s*.*;\s*charset=(.*)/; if ($1) { $charset = $1; $charset =~ s/[^a-zA-Z0-9_-]*//g; } return length($data); }

  Read the article

• How to create an AST with ANTLR from a hierarchical key-value syntax

  - by Brabster

  I've been looking at parsing a key-value data format with ANTLR. Pretty straightforward, but the keys represent a hierarchy. A simplified example of my input syntax: /a/b/c=2 /a/b/d/e=3 /a/b/d/f=4 In my mind, this represents a tree structured as follows: (a (b (= c 2) (d (= e 3) (= f 4)))) The nearest I can get is to use the following grammar: /* Parser Rules */ start: (component NEWLINE?)* EOF -> (component)*; component: FORWARD_SLASH ALPHA_STRING component -> ^(ALPHA_STRING component) | FORWARD_SLASH ALPHA_STRING EQUALS value -> ^(EQUALS ALPHA_STRING value); value: ALPHA_STRING; /* Lexer Rules */ NEWLINE : '\r'? '\n'; ALPHA_STRING : ('a'..'z'|'A'..'Z'|'0'..'9')+; EQUALS : '='; FORWARD_SLASH : '/'; Which produces: (a (b (= c 2))) (a (b (d (= e 3)))) (a (b (d (= f 4)))) I'm not sure whether I'm asking too much from a generic tool such as ANTLR here, and this is as close I can get with this approach. That is, from here I consume the parts of the tree and create the data structure I want by hand. So - can I produce the tree structure I want directly from a grammar? If so, how? If not, why not - is it a technical limitation in ANTLR or is it something more CS-y to do with the type of language involved?

  Read the article

• VB .NET error handling, pass error to caller

  - by user1375452

  this is my very first project on vb.net and i am now struggling to migrate a vba working add in to a vb.net COM Add-in. I think i'm sort of getting the hang, but error handling has me stymied. This is a test i've been using to understand the try-catch and how to pass exception to caller Public Sub test() Dim ActWkSh As Excel.Worksheet Dim ActRng As Excel.Range Dim ActCll As Excel.Range Dim sVar01 As String Dim iVar01 As Integer Dim sVar02 As String Dim iVar02 As Integer Dim objVar01 As Object ActWkSh = Me.Application.ActiveSheet ActRng = Me.Application.Selection ActCll = Me.Application.ActiveCell iVar01 = iVar02 = 1 sVar01 = CStr(ActCll.Value) sVar02 = CStr(ActCll.Offset(1, 0).Value) Try objVar01 = GetValuesV(sVar01, sVar02) 'DO SOMETHING HERE Catch ex As Exception MsgBox("ERRORE: " + ex.Message) 'LOG ERROR SOMEWHERE Finally MsgBox("DONE!") End Try End Sub Private Function GetValuesV(ByVal QryStr As Object, ByVal qryConn As String) As Object Dim cnn As Object Dim rs As Object Try cnn = CreateObject("ADODB.Connection") cnn.Open(qryConn) rs = CreateObject("ADODB.recordset") rs = cnn.Execute(QryStr) If rs.EOF = False Then GetValuesV = rs.GetRows Else Throw New System.Exception("Query Return Empty Set") End If Catch ex As Exception Throw ex Finally rs.Close() cnn.Close() End Try End Function i'd like to have the error message up to test, but MsgBox("ERRORE: " + ex.Message) pops out something unexpected (Object variable or With block variable not set) What am i doing wrong here?? Thanks D

  Read the article

• Reading strings and integers from .txt file and printing output as strings only

  - by screename71

  Hello, I'm new to C++, and I'm trying to write a short C++ program that reads lines of text from a file, with each line containing one integer key and one alphanumeric string value (no embedded whitespace). The number of lines is not known in advance, (i.e., keep reading lines until end of file is reached). The program needs to use the 'std::map' data structure to store integers and strings read from input (and to associate integers with strings). The program then needs to output string values (but not integer values) to standard output, 1 per line, sorted by integer key values (smallest to largest). So, for example, suppose I have a text file called "data.txt" which contains the following three lines: 10 dog -50 horse 0 cat -12 zebra 14 walrus The output should then be: horse zebra cat dog walrus I've pasted below the progress I've made so far on my C++ program: #include <fstream> #include <iostream> #include <map> using namespace std; using std::map; int main () { string name; signed int value; ifstream myfile ("data.txt"); while (! myfile.eof() ) { getline(myfile,name,'\n'); myfile >> value >> name; cout << name << endl; } return 0; myfile.close(); } Unfortunately, this produces the following incorrect output: horse cat zebra walrus If anyone has any tips, hints, suggestions, etc. on changes and revisions I need to make to the program to get it to work as needed, can you please let me know? Thanks!

  Read the article

• How do you search a document for a string in c++?

  - by Jeff

  Here's my code so far: #include<iostream> #include<string> #include<fstream> using namespace std; int main() { int count = 0; string fileName; string keyWord; string word; cout << "Please make sure the document is in the same file as the program, thank you!" << endl << "Please input document name: " ; getline(cin, fileName); cout << endl; cout << "Please input the word you'd like to search for: " << endl; cin >> keyWord; cout << endl; ifstream infile(fileName.c_str()); while(infile.is_open()) { getline(cin,word); if(word == keyWord) { cout << word << endl; count++; } if(infile.eof()) { infile.close(); } } cout << count; } I'm not sure how to go to the next word, currently this infinite loops...any recommendation? Also...how do I tell it to print out the line that that word was on? Thanks in advance!

  Read the article

• Exercise for exam about comparing string on file

  - by Telmo Vaz

  I'm trying to do this exercise for my exam tomorrow. I need to compare a string of my own input and see if that string is appearing on the file. This needs to be done directly on the file, so I cannot extract the string to my program and compare them "indirectly". I found this way but I'm not getting it right, and I don't know why. The algorithm sounds good to me. Any help, please? I really need to focus on this one. Thanks in advance, guys. #include<stdio.h> void comp(); int main(void) { comp(); return 0; } void comp() { FILE *file = fopen("e1.txt", "r+"); if(!file) { printf("Not possible to open the file"); return; } char src[50], ch; short i, len; fprintf(stdout, "What are you looking for? \nwrite: "); fgets(src, 200, stdin); len = strlen(src); while((ch = fgetc(file)) != EOF) { i = 0; while(ch == src[i]) { if(i <= len) { printf("%c - %c", ch, src[i]); fseek(file, 0, SEEK_CUR + 1); i++; } else break; } } }

  Read the article

• python os.mkfifo() for Windows

  - by user302099

  Hello. Short version (if you can answer the short version it does the job for me, the rest is mainly for the benefit of other people with a similar task): In python in Windows, I want to create 2 file objects, attached to the same file (it doesn't have to be an actual file on the hard-drive), one for reading and one for writing, such that if the reading end tries to read it will never get EOF (it will just block until something is written). I think in linux os.mkfifo() would do the job, but in Windows it doesn't exist. What can be done? (I must use file-objects). Some extra details: I have a python module (not written by me) that plays a certain game through stdin and stdout (using raw_input() and print). I also have a Windows executable playing the same game, through stdin and stdout as well. I want to make them play one against the other, and log all their communication. Here's the code I can write (the get_fifo() function is not implemented, because that's what I don't know to do it Windows): class Pusher(Thread): def __init__(self, source, dest, p1, name): Thread.__init__(self) self.source = source self.dest = dest self.name = name self.p1 = p1 def run(self): while (self.p1.poll()==None) and\ (not self.source.closed) and (not self.source.closed): line = self.source.readline() logging.info('%s: %s' % (self.name, line[:-1])) self.dest.write(line) self.dest.flush() exe_to_pythonmodule_reader, exe_to_pythonmodule_writer =\ get_fifo() pythonmodule_to_exe_reader, pythonmodule_to_exe_writer =\ get_fifo() p1 = subprocess.Popen(exe, shell=False, stdin=subprocess.PIPE, stdout=subprocess.PIPE) old_stdin = sys.stdin old_stdout = sys.stdout sys.stdin = exe_to_pythonmodule_reader sys.stdout = pythonmodule_to_exe_writer push1 = Pusher(p1.stdout, exe_to_pythonmodule_writer, p1, '1') push2 = Pusher(pythonmodule_to_exe_reader, p1.stdin, p1, '2') push1.start() push2.start() ret = pythonmodule.play() sys.stdin = old_stdin sys.stdout = old_stdout

  Read the article

• Splitting 25mb .txt file into smaller files using text delimiter

  - by user574141

  Regards, SO I am new to python and Perl. I have been trying to solve a simple problem and getting tied in knots with syntax. I hope someone has the time and patience to help. I have a 25mb file in ".txt" format which contains news-wire articles going back to 1970. Each news story is concatenated to the next, with only the "Copyright" statement to delimit. Each news story starts with "Item XX of XXX DOCUMENTS". There are certain metadata that are repeated throughout, I will use these for tagging later on. I wish to split this 25mb file into separate .txt files, each containing one news story (i.e. the text between "DOCUMENTS" and "Copyright", saving each with a different name (obviously). I am trying to 1 ) open the file... 2) iterate over lines in the file checking for the eof delimiter, and if it is not present writing the line to a list 3)write that list to a seperate small file. I'm having big problems with changing filenames using the counter, and how do I make Python start from where I left off, is the "seek" function appropriate? so far I have been trying this approach, completely unsuccessfully: myfile = open ("myfile.txt", 'r') filenumber = 0 for line in myfile.readline(): filenumber += 1 w=0 while myfile.readline() != '\s+DOCUMENTS\s*\n' ### read my line into a list mysmallfile()['w'] = [myfile.readline()] w += 1 output = open('C:\\Users\\dunner7\\Documents\###how do I change the filename each iteration???', 'w') output.writelines(mysmallfile) ###go back to start. Thank you for your time and patience. RD

  Read the article

• HTTPS post - what I'm doing wrong?

  - by evilone

  Hi, I'm making requests to the webaddress to get XML files throught the HTTPS connection. But this connection works like 50%. In most cases it fails. Usual error is "socket error #10060". Or "Error connecting with SSL. EOF was observed that violates the protocol". What I'm doing wrong? function SendRequest(parameters: string): IXMLDocument; var sPostData: TStringList; sHttpSocket: TIdHTTP; sshSocketHandler: TIdSSLIOHandlerSocketOpenSSL; resStream: TStringStream; xDoc: IXMLDocument; begin sPostData := TStringList.Create; try sPostData.Add('add some parameter to post' + '&'); sPostData.Add('add some parameter to post' + '&'); sPostData.Add('add some parameter to post' + '&'); sPostData.Add(parameters); sHttpSocket := TIdHTTP.Create; sshSocketHandler := TIdSSLIOHandlerSocketOpenSSL.Create; sHttpSocket.IOHandler := sshSocketHandler; sHttpSocket.Request.ContentType := 'application/x-www-form-urlencoded'; sHttpSocket.Request.Method := 'POST'; resStream := TStringStream.Create; sHttpSocket.Post(Self.sUrl, sPostData, resStream); xDoc := CreateXMLDoc; xDoc.LoadFromStream(resStream); Result := xDoc; resStream.Free; sHttpSocket.Free; sshSocketHandler.Free; sPostData.Free; except on E: Exception do begin TCommon.ErrorLog('errorLog.txt', DateTimeToStr(Now) + ' ' + E.Message); end end; end; Maybe I can do this in another way, that works like 100%, when internet connection is available? Regards, evilone

  Read the article

• Callback function and function pointer trouble in C++ for a BST

  - by Brendon C.

  I have to create a binary search tree which is templated and can deal with any data types, including abstract data types like objects. Since it is unknown what types of data an object might have and which data is going to be compared, the client side must create a comparison function and also a print function (because also not sure which data has to be printed). I have edited some C code which I was directed to and tried to template, but I cannot figure out how to configure the client display function. I suspect variable 'tree_node' of class BinarySearchTree has to be passed in, but I am not sure how to do this. For this program I'm creating an integer binary search tree and reading data from a file. Any help on the code or the problem would be greatly appreciated :) Main.cpp #include "BinarySearchTreeTemplated.h" #include <iostream> #include <fstream> #include <string> using namespace std; /*Comparison function*/ int cmp_fn(void *data1, void *data2) { if (*((int*)data1) > *((int*)data2)) return 1; else if (*((int*)data1) < *((int*)data2)) return -1; else return 0; } static void displayNode() //<--------NEED HELP HERE { if (node) cout << " " << *((int)node->data) } int main() { ifstream infile("rinput.txt"); BinarySearchTree<int> tree; while (true) { int tmp1; infile >> tmp1; if (infile.eof()) break; tree.insertRoot(tmp1); } return 0; } BinarySearchTree.h (a bit too big to format here) http://pastebin.com/4kSVrPhm

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22  | Next Page >