Search Results

Search found 690 results on 28 pages for 'routers'.

Page 16/28 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Approach for monitoring internet backbone traffic volume

    - by Greg Harman
    I'm interested in getting a picture of relative volume across different internet backbones. In particular, I'd like to see how traffic volume over a given route differs over the course of a day or from one day to the next. InternetTrafficReport.com is the closest approximation to this that I've found online, and their approach is to test ping times to a number of key routers from several geographically-dispersed servers. This sounds like one straightforward way to measure, but I don't have several geographically-dispersed servers. Is there a different approach for sampling this type of information from a single server?

    Read the article

  • telnet to 3389 connects, RDP remote desktop app bails ?

    - by scott_lotus
    I can TELENT 192.168.10.10 3389 and get a connection. But RDP client to 192.168.10.10 immedietly bails (i.e less then 1 sec) "connect" button greys briefly, RDP app remains on screen. Have tried these from many nodes on the subnet to 192.168.10.10 with same result. On 192.168.10.10 Allow Remote Desktop is enabled. On 192.168.10.10 windows firemall is off. Im connecting from the same subnet i.e no firewall hardware / routers in the way. AV software is installed but other nodes on same subnet allow RDP connection using exact same AV settings (network group profile) Checked 192.168.10.10 for any additonal AV software or local firewall products. Im sure non exist. Checked regedit to ensure 3389 was the port set for listening. Seems to be an XP problem (sp3) ( 2 nodes on the my LAN have this issue) and many work fine. Thanks for any help Scott

    Read the article

  • Cannot access SWITCH thru VPN

    - by MadBoy
    I've VPN connection set up that i connect to company with. I can connect to all devices (other switches, routers, servers from same subnet with same settings just diffrent ip) but I can't connect to NetGear Router GS748Tv3. Settings on switch: IP address 192.168.1.8 Subnet mask 255.255.255.0 Default gateway 192.168.1.1 Management VLAN ID: 0 (1 - 4094 or 0) (0 means all VLANs) Switch has 2 VLAN's configured 1 and 2. I can access this switch thru VPN if i log in to server and from server to switch but this is a little bit slower then normal way. Anything I'm missing?

    Read the article

  • How to prepare WiFi for an on-stage demo?

    - by Jeremy White
    Today at WWDC, Steve Jobs gave his keynote and ended up having a failure on-stage when connecting to WiFi. Google had a similar issue a few weeks ago in the same conference center. Please reference the following article for more information. http://news.cnet.com/8301-31021_3-20007009-260.html I am looking for information on how to best prepare a demo which uses a closed wireless network in front of a large audience. Note that the network will be closed, and will not require internet access. What steps can I take to prevent interference from existing WiFi, Bluetooth, etc? How can I best prevent curious/malicious people from trying to intrude on my WiFi network? I am open to recommendations on specific models of routers.

    Read the article

  • Netgear WNR1000 WiFi speed

    - by Kamil Klimek
    I have Netgear WNR1000 150N, Macbook Pro 13" with Broadcom BCM43xx 1.0, Network connection 60mbps When I connect through the cable I easily get around 60mbps. When I go through the WiFi it's capable to get only 32mbps at tops. Any ideas why is that? Is that my router limitation or maybe my WiFi card? If it is routers fault what router would you suggest. Best router would be with usb port for external hard drive. Forgot to add screenshot with connection details: Szybkosc transmisji == Transmission speed

    Read the article

  • Suggestions for a SOHO/Home Asterisk system

    - by James
    I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

    Read the article

  • Juniper J4350 out of order

    - by Benjamin Baron
    I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

    Read the article

  • recent unreliable wireless connection on 10.04 and 10.10

    - by gabkdlly
    Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

    Read the article

  • Multiple SSIDs better or worse

    - by swiss196
    I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

    Read the article

  • Windows 7 Wireless Network Adapter Stopped Working

    - by Andrew B Schultz
    I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

    Read the article

  • The canonical "blocking BitTorrent" question

    - by Aphex5
    How can one block, or severely slow down, BitTorrent and similar peer-to-peer (P2P) services on one's small home/office network? In searching Server Fault I wasn't able to find a question that served as a rallying point for the best technical ideas on this. The existing questions are all about specific situations, and the dominant answers are social/legal in nature. Those are valid approaches, but a purely technical discussion would be useful to a lot of people, I suspect. Let's assume that you don't have access to the machines on the network. With encryption use increasing in P2P traffic, it seems like stateful packet inspection is becoming a less workable solution. One idea that seems to make sense to me is simply throttling down heavy users by IP, regardless of what they're sending or receiving -- but it doesn't seem many routers support that functionality at the moment. What's your preferred method to throttle P2P/BitTorrent traffic? My apologies if this is a dupe.

    Read the article

  • Prevent users from Router 2 seeing Router 1 computers

    - by Patrick Robert Shea O'Connor
    I've got 2 Netgear N300 (WNR2000v3) routers. Here's my setup: Modem Router 1 Private Users/Router 2 Public Wireless Users on "Guest" Network. I want to prevent users who are connected to Router 2's "Guest" network from accessing anything that is connected to Router 1. There is an option when setting up the "Guest" network called "Allow guest to access My Local Network" which I thought if unchecked would do this very thing; however, I can still access files and such of computers connected to Router 1. Router 1 assigns 192.0.0.x IP addresses, Router 2 assigns 10.0.0.x IP addresses, how can they even see each other? Do I need to change the subnet or something else?

    Read the article

  • Is there a sensible way of 'teaming' two ADSL connections?

    - by Tim Long
    I work in an office complex that has two seperate ADSL connections, which they use to provide two seperate networks (actually both the ADSL routers go into a Cisco managed switch with two VLANs, one for each ADSL connection). Circumstances have changed so that 95% of the users are all on one ADSL connection. It would be great if there were a way to join together both connections to emulate a single connection at double the speed, but the ISP doesn't support bonding. So, is there a sensible way to take two completely seperate ADSL lines and use them to provide a single internet gateway?

    Read the article

  • Do I need a VPN to secure communication over a T1 line?

    - by Seth
    I have a dedicated T1 line that runs between my office and my data center. Both ends have public IP addresses. On both ends, we have a T1 routers which connect to SonicWall firewalls. The SonicWalls do a site-to-site VPN and handle the network translation, so the computers on the office network (10.0.100.x) can access the servers in the rack (10.0.103.x). So the question: can I just add a static route to the SonicWalls so each network can access each other with out the VPN? Are there security problems (such as, someone else adding the appropriate static route and being able to access either the office or the datacenter)? Is there another / better way to do it? The reason I'm looking at this is because the T1 is already a pretty small pipe, and having the VPN overhead makes connectivity really slow.

    Read the article

  • A home router for torrents, gaming, webbing and detailed QoS [closed]

    - by Cawas
    I want to plug in an external HD on it to torrent up never ending (mostly for seeding), with lowest priority. It should even automatically completely stop if it disturbs my net usage, and go back in later. And I want to be able to give gaming (or my computer) the highest priority, because of its ping requirements. It should be above even of Skype and any voip, which also have high priority. Web surfing and "youtubing" comes in the middle - it won't matter much if it delays a second or two. Finally, interface as simple as possible. It's fine if it's command line setup, but it needs to have a GUI. What are my options for routers / firmwares as described? Maybe Gargoyle? Or even Time Capsule? It seems to me good old DD-WRT isn't the best option out there anymore. I wonder what else could cover these grounds.

    Read the article

  • SSH not working after Restoring Running-Config to a Replacement Cisco Router

    - by Kyle Brandt
    One of my Cisco routers died over the weekend, Cisco sent the replacement and I restored the the config using copy tftp: running-config. Everything seems to work fine but I can no longer ssh into the router (I can telnet). The connection is refused, so it isn't listening on port 22 it seems like. I had previously backed up the config by just doing ssh router 'show run' > backup_config from my workstation. So: Is there anything wrong with my method of backup vs copy running-config tftp:? I know I haven't given any debug information, but is there something typical I need to do to get ssh working?

    Read the article

  • How to create a separated network to customers only?

    - by Valter Henrique
    I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

    Read the article

  • Cable management between multiple racks

    - by RippieUK
    I am in the planning phase of re-cabling our 5 racks in one of our offices and I would like to ask for some guidance on how you go, or would go about managing cables that goes between racks. In our situation we have 5 racks where the furthest to the right is our main patch panel for 300 floor ports. The rack next to it is our main comms rack where main switches and ISP routers are located. the other 3 racks next to the comms rack then all need to connect back to the main comms rack. I am not sure if a 48 port patch panel in each rack would be any good for this scenario? mainly because i am not sure this can be linked back to the main switch with only 1 cable. Would a 48 port switch in each rack be better as you can uplink those back to main switch? Or should we just run cables between racks back to the main switch? Hope someone can offer some guidiance. Thx

    Read the article

  • Wireless bridge between two prolink adsl modem/router

    - by MyName
    Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

    Read the article

  • How to build an outbound load balancer with linux?

    - by matnagel
    We have a small house in the countryside and there is no fixed broadband, so we had a mobile flatrate first, and for 2 people with 2 computers it was too slow, so now we have 2 flatrates for 2 client machines. So I pay 2 flatrates and have double bandwith theoretically. There is a local network in the house that connects everything. But when I am alone I wonder how I can use both connections at the same time. I want to build a solution where I can browse the web and page requests are spread between the 2 connections. I imagine there are expensive routers who can split the traffic between 2 lines. But is there a good way to do it with linux? The solution I am looking for will split the requests already for one page (multiple images, css files, javascrfipt files) between the two lines.

    Read the article

  • Virtual Networks in Oracle Solaris - Part 5

    - by user12616590
               A         long         time      ago in a    blogosphere   far, far away... I wrote four blog entries to describe the new network virtualization features that were in Solaris 11 Express: Part 1 introduced the concept of network virtualization and listed the basic virtual network elements. Part 2 expanded on the concepts and discussed the resource management features. Part 3 demonstrated the creation of some of these virtual network elements. Part 4 demonstrated the network resource controls. I had planned a final entry that added virtual routers to the list of virtual network elements, but Jeff McMeekin wrote a paper that discuses the same features. That paper is available at OTN. And this Jeff can't write any better than that Jeff... All of the features described in those blog entries and that paper are also available in Solaris 11. It is possible that some details have changed, but the vast majority of the content is unchanged.

    Read the article

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • BGP Router reccomendations for simple redundancy [closed]

    - by Jona
    We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

    Read the article

  • Could a computer act (dependably) as a wireless router for 200+ clients? [closed]

    - by awkwardusername
    That is, I have a Core 2 Duo E7500 at 2.93GHz, with 2GB memory. I plan to install either Windows Server 2012 or Zeroshell 2.0RC1, and it also (planning to) includes two PCIe Wireless Card Adapters. It also has one ethernet port, and I will connect that to another machine which will be a Database and a Web Server. My plan is to have a corporate level wireless intranet with 200+ clients. I cannot afford to buy routers because I want to operate at zero costs as possible, utilizing my available resources. Is that plan plausible? Also, what minimum specs should my wireless card have? @SvenW: Oh, I meant corporate on the deployment level. I am still an undergraduate and this is more of an educational and expiremental work than an actual project. I got Windows Server 2012 for free though, and this isn't actually for commercial use.

    Read the article

  • Easier way to create floppy disk images?

    - by Bryan
    I'm using Vyatta routers with KVM and want to attach a floppy drive with a config file for Vyatta when I boot the image. I'll be doing this over and over again, and as such am looking for an automated way of creating the floppy images. Right now, I'm doing the following: Create floppy image with qemu-img create Format floppy image with mkdosfs Mount floppy image with mount -t fat /tmp/floppy.img /media/floppy Populate floppy image with cp -r /tmp/configs/ /media/floppy/ Unmount floppy image with umount /media/floppy Save floppy image with mv /tmp/floppy.img ~/floppies/ Any chance there's an easier way to do this?! Perhaps a shortcut application that I can give a directory to and it will do all this for me w/out having to mount the image?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >