Search Results

Search found 3505 results on 141 pages for 'silent installer'.

Page 16/141 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Recommended ways to install USB drivers with a Visual Studio 2005 Setup Project?

  - by tjmoore

  I need to install a USB driver with an application, and I'm using a Visual Studio 2005 Setup Project to create the installer. The driver only needs to be installed sufficient enough so that when the USB device is plugged in, Windows will go off doing it's "installing device" routine and do the rest of the job. It would be okay also to have the setup finish and then the user connects the device when required with the driver install completing then. However the user shouldn't be prompted to find a driver location. The USB drivers I have are available either as plain .sys / .inf files, or as a full installer (.msi together with a setup.exe wrapper). The full installer deals with combinations of operating systems and languages, but the application is for internal use and I can limit the target OS to Windows XP. Would it be better just to run the available installer via a custom action, or to install via the .inf file somehow (I'm not sure how to do that)?

  Read the article

• LAMP Stack Versioning -- Is there a website or version tracker source to help suggest the right versions of each part of a platform stack?

  - by Chris Adragna

  Taken singly, it's easy to research versions and compatibility. Version information is readily available on each single part of a platform stack, such as MySQL. You can find out the latest version, stable version, and sometimes even the percentage of people adopting it by version (personally, I like seeing numbers on adoption rates). However, when trying to find the best possible mix of versions, I have a harder time. For example, "if you're using MySQL 5.5, you'll need PHP version XX or higher." It gets even more difficult to mitigate when you throw higher level platforms into the mix such as Drupal, Joomla, etc. I do consider "wizard" like installers to be beneficial, such as the Bitnami installers. However, I always wonder if those solutions cater more to the least common denominator -- be all to many -- and as such, I think I'd be better to install things on my own. Such solutions do seem kind of slow to adopt new versions, slower than necessary, I suspect. Is there a website or tool that consolidates versioning data in order to help a webmaster choose which versions to deploy or which upgrades to install, in consideration of all the other parts of the stack?

  Read the article

• Testing on Device Other Than the Known Brand Question (Local and Imported Phone Question)

  - by David Dimalanta

  I have a question. When testing a device by using Eclipse, it's easy to install and add device software with these specific brands commonly used in game testing like Samsung, Google, T-Mobile, and HTC; according to the Android Developers website. What if I'm using other brands that runs on Android to test the program via Eclipse (i.e. MyPhone, Starmobile), what should I look for to download in order to enable testing phones that those brands are using other than the brands that are known and commonly used: model number or simply brand? Here's some examples of these brands other than the brands we've known that runs on Android: Starmobile Engage 7 (http://www.lazada.com.ph/Starmobile-Engage-7-Android-40-4GB-with-Wi-Fi-Black-Starmobile-Mercury-B201-COMBO-39833.html/) My|Phone A898 Duo (http://www.myphone.com.ph/#!a898-duo/c1yt) Also, take note that I'm a Filipino programmer working at the Philippines to test our local smartphones for the created Android game or app. Hope you can understand me for my help.

  Read the article

• Correct DB details produce “Database server was not found” (Prestashop Installation)

  - by Steve

  At stage 3 of the Prestashop Installation, I enter the DB details which I know to be correct, and I receive the error: Database server was not found. Please verify the login, password, and database server name fields. The server is localhost, and I have verified the database name and username. Why can Prestashop not find the server? This occurs when choosing InnoDB and MyIsam. If I change the server from localhost to the public hostname I receive the same error.

  Read the article

• Security Risks of Unsigned ClickOnce Manifests

  - by Tom Tom

  Using signed manifests in ClickOnce deployments, it is not possible to modify files after the deployment package has been published - installation will fail as hash information in the manifest won't match up with the modified files. I recently stumbled upon a situation where this was problematic - customers need to be able to set things like connection strings in app.config before deploying the software to their users. I got round the problem by un-checking the option to "Sign the ClickOnce manifests" in VS2010 and explicitly excluding the app.config file from the list of files to have hashes generated during the publish process. From a related page on MSDN "Unsigned manifests can simplify development and testing of your application. However, unsigned manifests introduce substantial security risks in a production environment. Only consider using unsigned manifests if your ClickOnce application runs on computers within an intranet that is completely isolated from the internet or other sources of malicious code." In my situation, this isn't an immediate problem - the deployment won't be internet-facing. However, I'm curious to learn what the "substantial security risks" of what I've done would be if it was internet-facing (or if things changed and it needed to be in the future). Thanks in advance!

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• To what extent do code-signing certificates boost sales of your software?

  - by Dan W

  In the experiences of everyone here, have you found a certificate to boost sales of your (downloadable) program? I produce .NET software and upon clicking the installation file, Windows 7 pops up a message saying the software is from an "unknown publisher" and to proceed with caution. For Windows 8, this appears to be even more prominent, and may adversely affect the number of downloads, and therefore the number of sales. A certificate will help soften this 'warning' by (for example) changing the warning's colour from orange to blue, and give the publisher's name instead of 'unknown'. But I'd like more tangible evidence since many people are obviously used to that message, and may not care and download anyway. So has anyone noticed a jump in sales after the switch?

  Read the article

• "Unable to install initrd-tools" error during installation.

  - by Rahul

  Was trying to install Ubuntu from a CD on a machine which already has windows on it, choose the option of "Resize IDE1 master (hda) and use freed space" during the "Install the base system" step. After that i get the error: Unable to install initrd-tools. An error was returned while trying to install the initrd-tools package into the target system. Check /target/var/log/bootstrap.log for details. The problem is one one hand i cannot proceed with the complete installation and on other hand if i remove the CD, am not able to boot windows as it says No bootable device. Would highly appreciate for any recommendations.

  Read the article

• Creating an install of Ubuntu to clone

  - by naaronne

  I work on a team with several other developers. We all have similar hardware and we all run at least the same base development software. We are wishing to upgrade from 10.04 to 10.10 doing a clean install. I am looking for a way to do a base install of Ubuntu, including all our common applications, then clone it to each of the developers drives and then let them further customize their own install. Some considerations would be giving the developer the ability to have their own person id and not the same as which the base install was done with. I know they do this on VMware installs and corporate installs of Windows that can then be customized, but I have not seen this done with Ubuntu yet. Thanks

  Read the article

• PrestaShop install SQL error

  - by Steve

  I am trying to install PrestaShop 1.4.0.17, and reach Step 3. I enter database information, which tests okay, and I choose the second option: Full mode: includes 100+ additional modules and demo products (FREE too!). I choose Next, and receive the error: Error while inserting data in the database: ‘CREATE TABLE `shop_county_zip_code` ( `id_county` INT NOT NULL , `from_zip_code` INT NOT NULL , `to_zip_code` INT NOT NULL , PRIMARY KEY ( `id_county` , `from_zip_code` , `to_zip_code` ) ) ENGINE=’ You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near \’\’ at line 6(Error: : 1064) This happens if I use either MyISAM, or InnoDB. Why is this happening? This also happens if I drop all database tables, and try again in simple mode. Is there a manual installation method?

  Read the article

• What can I change/investigate where the install does not complete?

  - by tunist

  I have already successfully installed Ubuntu 10.10 on my laptop and it works fine. I attempted to get my desktop PC to dual boot Windows and Ubuntu but found that neither the 32 or 64 bit install images will boot/install successfully. The startup script locks on 'initializing core #2' (or 1 or 3).. once I saw it say 'ok' at the end but it still locks there. I have tried to change the boot sequence by inserting 'debug' and 'acpi-off' into txt.cfg in both isolinux and syslinux folders but no changes were obvious during the boot.. as far as it got. The pc is built with an abit IP35 motherboard and nvidia 8600GT gfx card. Does anyone have any suggestion of what else I can change to get the install working?

  Read the article

• How do I reduce package content on a custom install CD?

  - by Pete Ashdown

  I normally do all my installs via PXE server, but I'm building a custom CD for kvm installs that are not on the same vlan as my PXE server. I would prefer this CD was as small as possible and it fetched packages from the network like netinstall mini.iso CD does, but netinstall doesn't mount /cdrom like the server install CD does. I need the cdrom for preseed. I've got my custom server install CD working, but it is still ~700MB. Trying to modify "dists/lucid/main/binary-amd64/Packages.gz" gives me no love as it complains that I've got a corrupt Packages.gz no matter what I do. I'd rather the preseeded mirror was used rather than CD once it gets the cdrom setup. Any ideas?

  Read the article

• How to Install Moodle to subdomain with softaculous via cpanel [closed]

  - by Sean

  Hi there i installed moodle to a directory with softaculous as it doesn't allow installing to subdomain, after install I created a subdomain and pointed the destination (of subdomain) to previously created moodle directory, now when I go to the subdomain.example.com it says Incorrect access detected, this server may be accessed only through "http://example.com/moodle" address, sorry. Please notify server administrator. Any suggestions much appreciated! I must be doing something wrong, when installing it was very similar to these instructions

  Read the article

• Ruby Installation System similar to NSIS (Nullsoft Scriptable Install System), feasibility?

  - by Chris Valentine

  I'm learning (relearning) how to use NSIS as I have not touched it in a bit. I also have recently become familiar with the Ruby language and find it very pleasing and actually a bit fun. And upon reading about the history of Rake I had a thought. What are the pros/cons of someone making (or migrating, or something) an installation system similar to NSIS in Ruby. It seems the learning curve would be far easier (NSIS seems so low level) and probably get the same job done in far less scripting. NSIS seems very outdated. Seems it would tie into things like Rake easier and Ocra and make Ruby distribution simpler for applications too. Maybe even give me a project to work on. Any thoughts on this?

  Read the article

• Bioshock2 installer is not running under windows 7 64bit

  - by kaykay

  When I try to install the Bioshock2 game under windows 7 64-bit i get the following error- "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher." I try to run it in compatibility mode (as XP and admin) I get the same error. I don't understand why it is giving me this error because if it is 32bit program then it should just run like other 32 bit application I have. And I am sure Bioshock2 is not a 16bit game. What can I do to run this program? It ran on Windows XP in the past.

  Read the article

• Offline installer for Windows 8?

  - by duncan12

  I have a computer repair service, and can see a few more people wanting Windows 8 updowngraded. Because of New Zealand's internet speeds it takes 1-2 hours to run the download part of the official Windows 8 upgrade tool. This means I have to go back to people the next day. I would like to keep an "offline" version of the Windows 8 upgrade tool on my flash drive, so I can avoid this inconvenience. Obviously it would still require a legit credit card etc, it just comes with the download part not needed. I cannot find such a tool. Does one exist?

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Installation is forbidden by system policy

  - by Frost

  Note: I'm posting this here on Superuser as I think the issue is more related to the Windows Installer than the game itself. My friend is having trouble installing Company of Heroes and CoH: Opposing fronts under Windows 7. A couple of percent into the installation, when the C/C++ runtime is being installed, the install fails with the following message: An error occured while installing the Windows Installer package "C:\Users\...\AppData\Local\Temp\...\...\vcredist.msi". Error code 10212:00000659: MsiInstallProductW returned 00000659: This installation is forbidden by system policy. Contact your system administrator. We have tried: Making sure that any previous installations have been completely removed, including searching and deleting any files/folders/registry entries matching "THQ" (the publisher) and "Relic" (the developer). Installing into a brand new user account Running Setup.exe as administrator Running Compatibility check for Setup.exe, which suggested Windows XP but failed when trying those settings out Does anyone know what might be the cause of the system policy error?

  Read the article

• Does /NOCANDY avoid any adware-related activities with OpenCandy?

  - by Andrew Grimm

  OpenCandy claims that using the /NOCANDY switch when using a OpenCandy-affiliated installer allows you to avoid opencandy. Should I take their word for it? If not, can anyone independent of OpenCandy and their affiliates verify that /NOCANDY works? Background: About to install WinSCP onto a fresh Windows installation, and found out that new versions have OpenCandy associated with their installer. For the sake of balance, here's a link to WinSCP's FAQ on OpenCandy. The claim about /NOCANDY working appears on WinSCP's web site, but the same boilerplate appears on other OpenCandy web sites. If the OpenCandy people are offended by the tag "spyare": sorry, but it's the main tag here, rather than "adware".

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• how to customize debian installation cd for your needs

  - by Frank

  I have with me a Debian CD, which I want to customize for my own needs. I have extracted the CD and started to change some parts of it, e.g Splash screen (splash.png) installer Title (through isolinux.cfg) etc These are the things that I want to do: Change the Splash logo at start up of installation to have my own (which is done) Change the grub boot parameters to use my comapny name on it. Change the set of packages in it, so that I can have my own set of packages in it and only those packages are installed Do some post installation steps Customize it's startup and login screen to have my company name. After I am done with this customization, I need to build its live installer CD so that I can install it on my own, on any other system.

  Read the article

• Offline installer for .net 3.5 sp1 not working

  - by Tim Tom

  I download a big file of .Net 3.5 SP1 from http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe Now when I try to install it on Windows Server 2012, I get the following screenshot: What the?? When will the microsoft learn? Now this is a loop. When I try to install from Server Manager, I get installation cannot be done. It needs installation disk. Does that mean I can't install at all without the installation disk in presence?

  Read the article

• Has anyboy been able to install Pantograph for Blender on Windows?

  - by S.gfx

  I am specially interested on if somebody is actually doing/maintaining an installer for Windows, as there are quite several issues when installing all dependencies, etc. (for example, there might be someone already doing a Installbuilder installer for it and am just not aware of the matter) If not, at least if someone got it working and has some key tip to share. I am never able to fully get it all up and running. I'd love to have a not super complex way to install each new build of this great vector rendering module for Blender. Edit- Pantograph url: http://severnclaystudio.wordpress.com/bluebeard/a-users-guide-to-pantograph/

  Read the article

• Wubi-like installer for Fedora?

  - by Veeti

  Is there an application like Wubi for other Linux distributions? More specifically, I'd love to install Fedora without a dedicated partition or changing my bootloader.

  Read the article

• Updating GeForce 9200 driver on Vista (64-bit) yields installer failed

  - by weka

  OK, so I have a Windows Vista... more specifically this: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103182 a Acer Aspire AX3200-U3600A Desktop. I have DirectX 11 and I am trying to update my drivers... During the update of the latest one: GeForce 306.23 Driver my screen flashes a bit and goes black. This is standard when updating GRAPHIC DRIVERS. Then... my screen shifts 50 pixels or so to the left... OFFSCREEN. Not even Auto Image Adjust will fix the screen back... Then after that happens, I get this: Help, please? I just want to update my graphic drivers....

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >