Search Results

Search found 126374 results on 5055 pages for 'windows server 2003 r2'.

Page 16/5055 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Windows Server 2003: Router, DHCP, Looses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Windows Server 2003: Router, DHCP, Loses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Windows Server 2003 stops sharing a folder when the server reboots [closed]

  - by evolvd

  I have a file server that will stop sharing a particular folder once the server is rebooted. This problem happened after the server went through a p2v migration. There are no events that seem to correlate to this issue. I was reading http://support.microsoft.com/default.aspx/kb/870964 but I don't think this applies and there are other shares on the same drive that are still there after a reboot. To be clear about the issue; When the server reboots share x is no longer shared any more but share y and z are still there. This has nothing to do with users not being able to see the share. On the server its self the folder that was shared is no longer shared. I wish I had more information to post but after hours on this issue I can't find a way to move forward.

  Read the article

• Windows RDP cannot connect to x64 server from XP SP3+ [closed]

  - by Tom

  Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

  Read the article

• Email flow problem in Exchange 2003

  - by Hugo Garcia

  Hello colleagues, I have a problem whit some emails that are not being delivered to the user inbox. The SMTP server on the DMZ that receives email from the internet is a Symantec Brigthmail Gateway, this server reports that the message was delivered normally to the exchange server: The DMZ server forwars the incoming mail to the exchange server that is on the LAN segment, and the message tracking on the exchange server reports the email being submited to the advanced queue: I have done severals searches on google, without any luck. have any one of you guys experienced similar problems? Any help or pointers would be very appreciated. as requested, here is a transcript of a smtp session: helo 250 mail2.XXXXXXXXXXXXXXXX.XXX.XX Hello [192.168.9.6] MAIL FROM: [email protected] RCPT TO: [email protected] DATA Subject: Mensaje de Prueba Test . 250 2.1.0 [email protected] OK 250 2.1.5 [email protected] 354 Start mail input; end with <CRLF>.<CRLF> 250 2.6.0 <'[email protected]> Queued mail for delivery

  Read the article

• MS12-070 : Security Updates for all supported versions of SQL Server

  - by AaronBertrand

  This week there was a security release for all supported versions of SQL Server . Each version has 32-bit and 64-bit patches, and each version has GDR (General Distribution Release) and QFE (Quick-Fix Engineering) patches. GDR should be applied if you are at the base (RTM or SP) build for your version, while QFE should be applied if you have installed any cumulative updates after the RTM or SP build. ( More details here .) SQL Server 2005 RTM, SP1, SP2, SP3 - not supported SP4 - GDR = 9.00.5069,...(read more)

  Read the article

• Unlock file on Windows Server 2003 without rebooting

  - by BalusC

  We've several Windows Server 2003 machines running, each with its own purposes. There are scheduled jobs which synchronizes some files over SFTP using WinSCP. Very sometimes a newly copied file is left locked in the "inbox" folder without any reason. The machine's own background task (programmed in Java) can't move it to the "processed" folder anymore after processing it. Manually moving it only yields the well known error message Cannot move [filename]: it is being used by another person or program. The only resort is to reboot the machine, but we would of course like to avoid that. Any suggestions? I tried Unlocker which works fine locally at WinXP, but doesn't work at those Win2K3 machines by remote desktop (unlock option doesn't show up in rightclick context menu).

  Read the article

• Exchange 2003 Outlook Anywhere - Changed certificate, not working

  - by JohnyD

  I have a single Exchange 2003 installation which for the past 2 years has been set up for Outlook Anywhere access by means of a self-signed certificate. Just this past week I updated that certificate to a Go Daddy wildcard certificate to allow for use of our web services over https. I've updated the web listener on our ISA 2006 firewall and I can successfully use our services over https. However, my Outlook Anywhere access is now not functioning. I've installed the new wildcard certificate on my XP notebook into the Trusted Root Certificate Store but I keep getting prompted that the password is incorrect. To make things even more confusing I also have OWA set up and this works fine with the new certificate. Any ideas as to what I'm doing wrong?

  Read the article

• Forcing DFS replication on Windows 2003 Web Edition SP2

  - by Greg B

  I have a pair of web servers running Windows Server 2003 Web Edition SP2 (build 3790). There servers are a on a Gigabit LAN and are on the same subnet. I created a new link on the 1st server and added the second box as a target to the link. I configured replication as ring. The 2nd server gets some of the files on the scheduled replication but this varies wildly which makes me think it's not running fully. The folder on server 1 is 1.3GB. Is there some way I can force repication (from a console?) and monitor the progress and see if/when/why it fails.

  Read the article

• SBS 2003 to SBS 2011

  - by Steve

  We've migrated SBS 2003 to SBS 2011...so far everything has gone smoothly. We're in the final phase of migrating the last amount of data over. Is there a way I can check to be sure that our old server isn't restarting due to the 21 day grace period? As our 21 days is up on Thursday. Yet it's restarting on its own now...maybe a power supply issue...? Is there any way to extend the 21 days? or roll it back? or does this take a call to MSFT? Very odd...

  Read the article

• partition alignment on fresh windows 2003 ent server

  - by Datapimp23

  Hi, I have this server which has it's physical disks in RAID 5 controlled by a 3com raid controller. size of the stripe unit is unknown for the moment (Can check tomorrow in the office). I need to install windows server 2003 ENT and create 2 partitions (OS, Data). I'd like to create the partitions before the installation on windows server. They have to be aligned properly. I have the newest version of gparted on a disc but I have no clue if this is the right tool. Can someone point me in the right direction? Thanks

  Read the article

• Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

  - by Alex

  had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

  Read the article

• Connecting to Exchange Server 2003 over POP using openssl s_client

  - by Andreas Jansson

  Hi, I'm trying to fetch emails programmatically from Exchange 2003 over POP. As a proof of concept I'm trying to connect using openssl s_client. I've started the POP service on my Exchange server. Trying to connect using openssl s_client -connect MYEXCHANGESERVER:995 returns 20303:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: Trying openssl s_client -connect MYEXCHANGESERVER:995 -starttls pop3 returns CONNECTED(00000003) write:errno=32 Forgive a newb - I'm basically shooting wildly in the dark with no idea on what I'm supposed to be doing. In the past I've read my GMail over openssl s_client, and setting up those certificates was easy and well documented. I would imagine I need to set up some sort of certificate here as well, and I've looked a bit at using a .pfx file. But like I said, I'm completely lost here. Thankful for any advice, Andreas

  Read the article

• SBS 2003 no network connection and acting strangely a bunch of Event ID 13568

  - by JMan78

  I've got an SBS 2003 Standard server and it was running fine until earlier today when it was rebooted, after the reboot it has no network connection, I can't seem to right click on a lot of stuff and get dialog boxes, I can't launch IE, it's acting extremely strange. We are dead in the water at this point. I checked the event logs and noticed we're getting a ton of Event ID's 13568. I thought it was a Journal Wrap error, and while I was going to try to fix it using this article: http://support.microsoft.com/kb/290762 I can't even do that because after I set the D4 value, then went to restart NTFRS from command prompt and I got the following: System Error 1059 has occurred. Circular service dependency was specified. That is where I'm at and haven't been able to figure anything else out. ALso, I've posted this on EE, there are some screens of event logs and such there: http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/SBS_Small_Business_Server/Q_27969593.html

  Read the article

• Removing an iSCSI Target - iSCSI initiator 2.0 on Windows Server 2003 R2

  - by DWong

  For the life of me I cannot figure out how to remove an iSCSI target (Dell Equallogic SAN) from a Windows Server 2003 box. The volume shows up in Windows as drive letter Y:\ Using the iSCSI initiator, I can remove the Target Portal, but cannot remove the Target itself. Can someone give me some guidance on this? I've gone as far as setting the volume offline in the Dell SAN management tool, and even permanently deleted the volume. The Target no longer shows up in the iSCSI Initiator properties, but the drive letter is still there under My Computer. And now Windows is throwing delayed write errors for that drive. There must be a proper way to successfully remove an attached Target. TIA!

  Read the article

• Disabling weak ciphers on Windows 2003

  - by Kev

  For PCI-DSS compliance you have to disable weak ciphers. PCI-DSS permits a minimum cipher size of 128 bits. However for the highest score (0 I believe) you should only accept 168 bit ciphers but you can still be compliant if you permit 128 bit ciphers. The trouble is that when we disable all but 168 bit encryption it seems to disable both inbound and out bound secure channels. For example we'd like to lock down inbound IIS HTTPS to 168 bit ciphers but permit outbound 128 bit SSL connections to payment gateways/services from service applications running on the server (not all payment gateways support 168 bit only we just found out today). Is it possible to have cipher asymmetry on Windows 2003? I am told it is all or nothing.

  Read the article

• Windows Server 2003 Standby/Sleep Results in Cold Boot when Resuming

  - by Simon Chadwick

  I'm running Windows Server 2003 sp2 on a Dell Inspiron e1705. There has never been a problem going to standby/sleep mode (by closing the laptop lid, or from the Start menu), and then resuming later. Today I did a Windows Update to install the latest patches and fixes. I don't know if there is a correlation, but now when I resume from standby/sleep mode, the machine does a cold boot. The AC adapter is connected. The battery is 2 months old, and all its LEDs light up when pressing its test button. The Power Management shows it at "99% (charging)" all the time. There is nothing suspicious in any of the event logs. Any ideas?

  Read the article

• The MAPI call 'OpenMsgStore' failed: The MAPI provider failed Exchange 2003

  - by realitnzsam

  Hi guys, Recently we moved our Exchange 2003 (SP2) database from one drive to another. Now every other day or so we get errors coming up in the event log: Event Type: Error Event Source: MSExchangeSA Event Category: MAPI Session Event ID: 9175 Date: 10/03/2010 Time: 8:06:15 a.m. User: N/A Computer: SERVER Description: The MAPI call 'OpenMsgStore' failed with the following error: The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 For more information, click http://www.microsoft.com/contentredirect.asp. Restarting the Exchange Information Store fixes this instantly, but until we do it Outlook won't connect to Exchange and Blackberry emails aren't pushing out.

  Read the article

• Windows Server 2003 Synchronize Not Sticking

  - by lkessler

  We have a Windows Server 2003. It had Raid running on 2 disks. One disk failed and the Raid Controller failed. We replaced the disk and controller and restored everything. No data was lost. The users of that server found that there were a number of directories that appeared empty. We found that from their machine, we could right-click on the directory and select "Synchronize" and the files in the directory would now be visible to them. However, when opening Internet Explorer and browsing the web and ftp'ing to a web site, the files in the directory would vanish. We would have to "Synchronize" them again to get them to reappear. What is going on to cause this need to Synchronize and then re-Synchronize again? What do we need to do to fix this so that the directories are permanently visible?

  Read the article

• Strange failure audit in 2003 R2 X64 SP2

  - by Az

  our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

  Read the article

• Exchange 2010 domainprep messing up mailbox permissions on existing Exchange 2003 server

  - by tearman

  So our environment is basically we have an Exchange 2003 server, and we're attempting to move to Exchange 2010 gradually, and move to new hardware while we're at it. So our first step was obviously to get Exchange 2010 installed on the new box. However, after running the domainprep steps listed in http://technet.microsoft.com/en-us/library/bb125224.aspx (including PrepareLegacyExchangePermissions) our mailbox permissions get messed up. Normally, we have an AD security group for Exchange Administrators that allows anyone in that group to view all folders inside any user's mailbox. However, now, this functionality is gone and our Exchange Admins can't access anyone's mailboxes. We'd like to get this functionality back if we could. Thanks

  Read the article

• Exchange 2003 ActiveSync fine but GAL lookups not working

  - by Daniel Lucas

  We have Exchange 2003 SP2 and use ActiveSync for our mobile devices (iOS and sever Android versions). Everything works except for GAL lookups and we've confirmed that the devices and client versions we are trying it on are supposed to support it. The symptom is different depending on the client, but there is never an error. In a nutshell, lookups return no results. This was working previously and we aren't sure what has changed. Are there logs in Exchange or IIS that will allow me to see GAL lookup transactions? Could it be a GAL permissions issue? (No issues with GAL in Outlook) Could it have been caused by upgrading our DCs to 2008 and increasing the forest/domain functional levels?

  Read the article

• Remote desktop connection issues in windows server 2003

  - by rboorgapally

  Hi all, We are running windows server 2003 at our work place. I have enabled the remote desktop connections. I have also added all the users who connect to the server(three to four people) to the RDC group of users. Many of these users are also having Administrator access. The problem we are facing is that the connection is suddenly lost when we are working on something. Also, at times the system restarts by itself. Is this issue related to the limit on the number of users able to connect to the system? If so, why does the system accept new connections and/or terminate the existing connections? Has this anything to do with the users having administrator access so that all have equal prority and that is why existing connections are stalled? Also, please differentiate between console remote desktop and non console remote desktop.

  Read the article

• Can not RDP to Win 2003 box or initiate remote restart

  - by Richard West

  I've got a Windows 2003 server that's at my remote data center. This morning I tried to connect to it via RDP, but the connection fails with the following error: This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. I have also trying issuing a remote shutdown/restart command using the "shutdown -i" command from my local system. No error is reported, however the system does not reboot. This server runs SQL Server 2005 and it is still fully operational and responsive to queries. I can also remotely connect to the services control panel of the remote system. Is there anything that I can try to regain control of the system, short of having an operator in the data center do a hard reboot on the server for me?

  Read the article

• Set security on pattern of sub folders (Server 2003)

  - by Mark Major

  I have a folder structure similar to the one shown below these paragraphs. How do I change security on every 'Photos' folder without clicking through each individually in Windows Explorer? There are about 50 top level folders (Bob, Jim, Eva, etc, etc) which have the same layout of folders inside. I am keen for any suggestions, either scripting or GUI. I am on Windows Server 2003. Cheap/free method would be good, as the company is part of a registered charity. Ideally I would like to do this via DFS path. E.G. \\mycompany.local\Shared\Staff\Bob\ Thanks for reading. Thanks for any info. Mark Bob Review Profile Photos Jim Review Profile Photos Eva Review Profile Photos

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >