Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 160/444 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • Wired connection stops working suddenly

    - by user90950
    I have Ubuntu 12.04.I was downloading something via aria..and then it suddenly stopped..no connection to Internet. I tried to ping the host but no reply..also tried to ping the route 192.168.250.1 but no reply got a message saying 'Ubuntu 12.04 has experienced internal error'. I restarted system but nothing is sorted out. The wired connection 'establishes' but I am not able to use Internet or ping either to host/route/8.8.8.8. The wireless is working fine and it does connect to Internet. I have a static IP address for wired connection and it does connect to Internet on Windows OS installed on this same Laptop with same IP settings.. please suggest how do i get my wired connection start working properly again..

    Read the article

  • VPS Server OS differences

    - by silvercover
    I have two VPS servers. one of them is running Linux and the other is Windows one. I've uploaded same file to their public_html folders and could see them in my browser via static IP address of each one like http://178.63.165.178/getorder/file.xml and http://178.63.165.178/getorder/file.xml. On the other side there is a device called SMSPrinter that configured to read those XML files using GPRS and need static IP address to reach destination server. unfortunately this device can only read file from windows server and could not reach the file on Linux server. There is no note in this device manual suggesting Windows server or specific OS! I've also set file permission on Linux server to 777 to have no limitation. what could be the cause of our problem? Thanks.

    Read the article

  • Possible automated Bing Ads fraud?

    - by Gary Joynes
    I run a website that generates life insurance leads. The site is very simple a) there is a form for capturing the user's details, life insurance requirements etc b) A quote comparison feature We drive traffic to our site using conventional Google Adwords and Bing Ads campaigns. Since the 6th January we have received 30-40 dodgy leads which have the following in common: All created between 2 and 8 AM Phone number always in the format "123 1234 1234' Name, Date Of Birth, Policy details, Address all seem valid and are unique across the leads Email addresses from "disposable" email accounts including dodgit.com, mailinator.com, trashymail.com, pookmail.com Some leads come from the customer form, some via the quote comparison feature All come from different IP addresses We get the keyword information passed through from the URLs All look to be coming from Bing Ads All come from Internet Explorer v7 and v8 The consistency of the data and the random IP addresses seem to suggest an automated approach but I'm not sure of the intent. We can handle identifying these leads within our database but is there anyway of stopping this at the Ad level i.e. before the click through.

    Read the article

  • How should a site respond to automated login attempts with phony usernames?

    - by qntmfred
    For the last couple weeks I've been seeing a consistent stream of 15-30 invalid login attempts per hours on my site. Many of them are non-sensical usernames that nobody would ever register for real, and often contain typical spam-related keywords. They all come from different IP addresses so I can't just IP block/throttle the requests. I'm not worried about unauthorized access to real accounts since they aren't using real usernames. And if it were a member of my site trying to brute force logins, they could easily scrape the valid usernames from the site, so I'm not worried about that kind of malicious behavior either. But what's the point of this type of activity? What would whichever bot operator is doing this have to gain by attempting all these logins?

    Read the article

  • DNS problems on CentOS fresh install

    - by Rick Koshi
    I'm having some DNS issues on a new box I'm installing with CentOS 6.2. I am able to look up names using nslookup, dig, or host. I am able to ping machines by name or by IP address. However, when I try other tools, such as ssh, wget, or yum, they are unable to resolve names. For example: # wget http://www.google.com --2012-03-08 14:48:06-- http://www.google.com/ Resolving www.google.com... failed: Name or service not known. wget: unable to resolve host address `www.google.com' # ssh www.google.com ssh: Could not resolve hostname www.google.com: Name or service not known # ping -c 1 www.google.com PING www.l.google.com (74.125.113.106) 56(84) bytes of data. 64 bytes from vw-in-f106.1e100.net (74.125.113.106): icmp_seq=1 ttl=46 time=43.6 ms --- www.l.google.com ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 59ms rtt min/avg/max/mdev = 43.665/43.665/43.665/0.000 ms # host www.google.com www.google.com is an alias for www.l.google.com. www.l.google.com has address 74.125.113.99 www.l.google.com has address 74.125.113.103 www.l.google.com has address 74.125.113.104 www.l.google.com has address 74.125.113.105 www.l.google.com has address 74.125.113.106 www.l.google.com has address 74.125.113.147 My /etc/nsswitch.conf file is the default, including this (standard) line: hosts: files dns /etc/resolv.conf is as set up by DHCP: ; generated by /sbin/dhclient-script nameserver 192.168.1.254 192.168.1.254 is a working DNS server (my DSL modem, working for years with other machines) Anyone know why ping would work, but ssh/wget would fail? Per NcA's suggestion, I tried changing /etc/resolv.conf to point to 8.8.8.8. Oddly enough, this does make it work. Obviously, my DSL modem is responding to DNS requests in some way that some parts of Linux's resolution system don't like. Looking at the tcpdump, I am unable to see what the difference is. Certainly, both servers are sending the same addresses. Here's the output from tcpdump -nn -X with the server set to the DNS server on the DSL modem. It's clearly replying with the correct addresses, but ssh/wget don't seem happy with it for some reason: 15:53:52.133580 IP 192.168.1.254.53 > 192.168.1.2.54836: 33157 7/0/0 CNAME www.l.google.com., A 74.125.115.105, A 74.125.115.106, A 74.125.115.147, A 74.125.115.99, A 74.125.115.103, A 74.125.115.104 (148) 0x0000: 4500 00b0 e33a 0000 ff11 53b1 c0a8 01fe E....:....S..... 0x0010: c0a8 0102 0035 d634 009c 7528 8185 8180 .....5.4..u(.... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0007 acd0 0008 0377 7777 016c c010 .........www.l.. 0x0050: c02c 0001 0001 0000 0001 0004 4a7d 7369 .,..........J}si 0x0060: c02c 0001 0001 0000 0001 0004 4a7d 736a .,..........J}sj 0x0070: c02c 0001 0001 0000 0001 0004 4a7d 7393 .,..........J}s. 0x0080: c02c 0001 0001 0000 0001 0004 4a7d 7363 .,..........J}sc 0x0090: c02c 0001 0001 0000 0001 0004 4a7d 7367 .,..........J}sg 0x00a0: c02c 0001 0001 0000 0001 0004 4a7d 7368 .,..........J}sh 15:53:52.135669 IP 192.168.1.254.53 > 192.168.1.2.54836: 65062- 0/0/0 (32) 0x0000: 4500 003c e33b 0000 ff11 5424 c0a8 01fe E..<.;....T$.... 0x0010: c0a8 0102 0035 d634 0028 98f9 fe26 8000 .....5.4.(...&.. 0x0020: 0001 0000 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 gle.com..... I'm not enough of an expert to know if this is malformed in some way, but ping seems to do the right thing with it. For comparison, here's the same thing when querying 8.8.8.8: 15:57:27.990270 IP 8.8.8.8.53 > 192.168.1.2.49028: 59114 7/0/0 CNAME www.l.google.com., A 74.125.113.105, A 74.125.113.103, A 74.125.113.106, A 74.125.113.147, A 74.125.113.104, A 74.125.113.99 (148) 0x0000: 4500 00b0 5530 0000 2f11 6453 0808 0808 E...U0../.dS.... 0x0010: c0a8 0102 0035 bf84 009c 39f8 e6ea 8180 .....5....9..... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 516a 0008 0377 7777 016c c010 ....Qj...www.l.. 0x0050: c02c 0001 0001 0000 0116 0004 4a7d 7169 .,..........J}qi 0x0060: c02c 0001 0001 0000 0116 0004 4a7d 7167 .,..........J}qg 0x0070: c02c 0001 0001 0000 0116 0004 4a7d 716a .,..........J}qj 0x0080: c02c 0001 0001 0000 0116 0004 4a7d 7193 .,..........J}q. 0x0090: c02c 0001 0001 0000 0116 0004 4a7d 7168 .,..........J}qh 0x00a0: c02c 0001 0001 0000 0116 0004 4a7d 7163 .,..........J}qc 15:57:28.018909 IP 8.8.8.8.53 > 192.168.1.2.49028: 31984 1/1/0 CNAME www.l.google.com. (102) 0x0000: 4500 0082 7b1b 0000 2f11 3e96 0808 0808 E...{.../.>..... 0x0010: c0a8 0102 0035 bf84 006e c67e 7cf0 8180 .....5...n.~|... 0x0020: 0001 0001 0001 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 517f 0008 0377 7777 016c c010 ....Q....www.l.. 0x0050: c030 0006 0001 0000 0258 0026 036e 7334 .0.......X.&.ns4 0x0060: c010 0964 6e73 2d61 646d 696e c010 0016 ...dns-admin.... 0x0070: 91f3 0000 0384 0000 0384 0000 0708 0000 ................ 0x0080: 003c .< I still don't know why the server's reply is adequate for ping but not for ssh/wget. If anyone has ideas, I'd be happy to hear them. For now, though, I can either refer to an outside DNS server or set up my own server on the new box. It's a workaround that seems like it should be unnecessary, but will allow me to proceed.

    Read the article

  • Both Webmin & ISPConfig won't work on my Ubuntu Linode

    - by SERVE-U
    I followed the steps on this page to download and setup Webmin on my Linode Ubuntu server, however, when I try to visit https + my.ip.add.ress + :10000, the page just hangs and nothing loads. I already looked into my firewall settings. I uninstalled Webmin and installed ISPConfig and all its dependencies, and the same thing happens at https + my.ip.add.ress + :8080. This is my first time managing a server so there could be something I overlooked. But my server is a pretty vanilla Ubuntu 12.10 with LAMP stack installed exactly as per the instructions in Linode's documentation.

    Read the article

  • What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

    - by user12620111
    A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

    Read the article

  • Intellectual Property cost

    - by Colin Mackay
    If a piece of bespoke software was developed by a company and the Intellectual Property was retained by the company that wrote it, but now the client of the software company wants to get that source code (and its IP) how much should it cost them? How would you calculate a fair cost for the purchase of that source and IP? UPDATE: Just to add, the software in question is of no use to anyone else (for any legitimate purpose) as it ties in directly with the business processes of one company. It is not something that can be subsequently sub-licensed or installed outside the company in question. There are links of to third party services (but these were existing services that the bespoke software had to integrate with in the first place).

    Read the article

  • How do I allow all possible IPs for Gmail servers through my ufw firewall?

    - by nomadicME
    I am currently using the following rule: ufw allow out from my_local_ip to any port 587 This is a little too lax for my liking. I would like to tighten it up and restrict it to only gmail's smtp server ip addresses, but they are always changing. I used to just wait until an outgoing email didn't make it to its destination, then check syslog for the ip address that was blocked, then add that to the ufw configure script. However, now I have a need for much more reliability. Is there any way to use smtp.gmail.com in ufw? I don't think so, but thought I would ask. Any other ideas? Thanks.

    Read the article

  • Using Linux as guest on vmware and sharing connection with windows vista

    - by mike
    I been trying for weeks with vmwware player, now d/l vmwware work station 7, Have a laptop with one built in modem and a usb modem I bought, It works great switching it over from host to use in ubuntu to connect to the net, now when I use that modem from the host to connect online I have no trouble getting ubuntu to share the internet connection, But tried with NAT bridge host and all to get it to work from ubuntu to share the internet connection to windows vista, the host, I know it should work if it works the other way around, I tried setting up my wlan0 eht0 and eth1 to the correct IP can get both systems to notice each other by name and ip, but cant get them to share the connection from guest to host, I've tried iptables and all as well, Can someone please help me out with this? I am sure It is something something I'm over looking, Thanks in advance

    Read the article

  • How to get rid of 'grub rescue'?

    - by SaM
    While logged into Windows, I deleted a disk partition which was containing Ubuntu. When I restarted my pc, it is showing 'grub rescue' command prompt. How to boot windows now? I no longer require Ubuntu. I have Ubuntu live CD When I tried the following commend: sudo apt-get install lilo the following error is shown: Err http://archive.ubuntu.com/ubuntu/ natty/main lilo i386 1:22.8-10ubuntu1 404 Not Found [IP: 91.189.92.156 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/l/lilo/lilo_22.8-10ubuntu1_i386.deb 404 Not Found [IP: 91.189.92.156 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

    Read the article

  • All my bandwidth eaten up - report included

    - by Mel
    I have my network bandwidth eaten up totally. Whenever I connect my network, without any application being opened it is always full. I have prepared report of iftop, nethogs and network system monitor. iftop and nethogs My host IP is 192.168.1.203 and all the rest are not known though I have tried to pin 192.168.1.105, it doesn't reply. If possible I would like to block the most disturbing IP which is 192.168.1.105 to block it. but don't know how.

    Read the article

  • On restart server Ethernet went down saying not configured!

    - by Sumant
    i justy have configured my dhcp server with static ip. after configuration dhcp server & routers were working fine. but after restarting server network connectivity went off. there are two lan cards but none of them is up.i tried setting up manually ip address again but it remains same. when i executed sudo /etc/init.d/networking restart i got this message * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... /bin/sh: cannot open /etc/iptables_rules: No such file Failed to bring up eth0. i have configured my server according to this What is it the problem with ubuntu 11.10 or some configuration error. i am not getting it please help me.

    Read the article

  • iptables allow dyndns domain name and auto update rules

    - by user3215
    I have registered with dyndns domain for my dynamically changing public ip address to use with iptable rules. On a server I've allowed some ports for this domain in the iptables configuration like the below entries: -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 21 -j ACCEPT But when ever my modem restarts, I couldn't connect to these allowed ports as public ip changes with modem restart and are not updated in the iptables on the server. Is there any option to automatically update iptable rules on server.

    Read the article

  • SSH from external network refused

    - by wulfsdad
    I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

    Read the article

  • Creating a new DHCP lease databse

    - by Stee1bear
    I have Ubuntu Server set up as my DCHP server. We have had it install for a few year and our dchp.lease file contain over 4000 entries. I am wanting to clean it up and basically start a new lease file to get current list (@1500 entries). I have read the walk through on how to make a new lease file and get it started, which leads me to this question. Will the dhcp server try to give each unit new IP address or will it build the new database with the IP addresses that the the units report to it?

    Read the article

  • Multicasting and VMWare

    - by John Breakwell
    Cracked a Multicasting problem this evening for one of my Canadian Tweeple. They wanted to mulitcast some MSMQ messages to another machine but nothing was arriving in the listening queue. A local queue could be configured to listen to the particular IP address/port in use and messages would arrive, though. Looking at the network traffic, nothing was going onto the wire for the IP address/port pair until they looked at traffic to the VMWare adapter. The machine had a virtual machine to simulate a remote computer and when they changed the setup from NAT to Bridge, multicasting burst into life.

    Read the article

  • Domain held at one registry, need to redirect to subdomain on my own hosting provider

    - by Glinkot
    Hi, There are lots of questions around this general area, but I haven't seen one that exactly mirrors what I'd like to know. It's per the title really. My understanding (and what I'm told by my host) is the easiest thing is just to get the transfer key and bring the DNS across to my own hosting provider. Also I'm told by my host this doesn't affect the client's ownership of the domain itself. Basically, I have a subdomain setup with the site (this has the same IP address as the top level domain). So presumably just giving the other registrar that IP address will only refer it only to the TLD rather than the subdomain. What's the easiest way to achieve this? It's an asp.net site, I don't have a hosted directory on the client's account where I can code a redirect. Thanks all Mark

    Read the article

  • Still prompted for a password after adding SSH public key to a server

    - by Nathan Arthur
    I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing? EDIT: SSH -v Log: Macbook:~ michaeleckert$ ssh -v [USER]@[SERVER URL] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug1: Connecting to [SERVER URL] [[SERVER IP]] port 22. debug1: Connection established. debug1: identity file /Users/michaeleckert/.ssh/id_rsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_rsa-cert type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze3 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze3 pat OpenSSH_5* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA [STRING OF NUMBERS AND LETTERS SEPARATED BY SEMI-COLONS] debug1: Host ‘[SERVER URL]' is known and matches the RSA host key. debug1: Found key in /Users/michaeleckert/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/michaeleckert/.ssh/id_rsa debug1: Trying private key: /Users/michaeleckert/.ssh/id_dsa debug1: Next authentication method: password [USER]@[SERVER URL]'s password: debug1: Authentication succeeded (password). Authenticated to [SERVER URL] ([[SERVER IP]]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.UTF-8 Welcome to [SERVER URL] Any malicious and/or unauthorized activity is strictly forbidden. All activity may be logged by DreamHost Web Hosting. Last login: Sun Nov 3 12:04:21 2013 from [MY IP] [[SERVER NAME]]$

    Read the article

  • Network strange problem

    - by Ali
    I have a CPanel server with 5 IPs and a few domains. During night, access to main domain through HTTP return 324 no response many times. After several refresh it comes but many assets won't load and return 324. Using HTTPS is fine. During day HTTP is also fine. But another domain on that very sever works fine all the day through HTTP. The server DNS are ns1 and ns2 of the first domain. Second domain is on the shared IP and first domain has a dedicated IP. I cant resolve the problem :( and appreciate any help so much!

    Read the article

  • Avoiding "double" subscriptions

    - by john smith
    I am working on a website that requires a bit of marketing; let me explain. This website is offering a single, say, iTunes 50$ voucher to a lucky winner. To be entered in the draw, you need to invite (and has to join) at least one friend to the website. Pretty straightforward. Now, of course it would be easy for anyone to just create a fake account and invite that account so, I was thinking of some other way to somehow find out of possible cheating. I was thinking of an IP check on the newly subscribed (invited) user, and if there is the same IP logged in the last 24 hours, and if that's the case, investigate more about it. But I was thinking that maybe there is a more clever way around this issue. Has anyone ever though about this? What other solutions did you try? Thanks in advance.

    Read the article

  • How do I configure multiple domain names on my IIS server? [closed]

    - by Dillie-O
    We have a few websites that we are running on one instance of IIS that need to be mapped for each of their domain names. For example. Site A has the domain name coolness.com Site B has the domain name 6to8Weeks.com Site C has the domain name PhatTech.com When I look at the "Web Site Identification" section of the IIS configuration window, I notice that I can specify an IP address and port, but if I click the Advanced button, I can also configure the site based on host header values as well. How do I configure each site in IIS? Ideally I would like them to all be able to listen to port 80, so I don't have weird URLs, but I'm not sure if I do this using headers, IP addresses, both, or something else.

    Read the article

  • Pidgin not present in 12.10 repositories, how do i get one?

    - by Ankit
    I want to install Pidgin on my 12.10 clean install system. When I go to the Software Center and try to install the client I get an error saying:- Not found There isn’t a software package called “pidgin” in your current software sources. Any ideas which repositories i need to import to get this done. ERROR:- Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/pidgin/pidgin-data_2.10.6-0ubuntu1_all.deb 404 Not Found [IP: 91.189.92.156 80] Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/pidgin/pidgin_2.10.6-0ubuntu1_amd64.deb 404 Not Found [IP: 91.189.92.156 80]

    Read the article

  • How do I now access my site for an installation

    - by user4524
    I have just rented a virtual private server with DirectAdmin. I have an ip address, lets say its: 178.239.60.18 Now I have made a new domain on the server. It resides in a folder called: example. Now when I would like to acces this in a browser, I type in 178.239.60.18/example or 178.239.60.18:example But this does not work. What am I doing wrong? When I look at the DNS record it does say the the ip address for example is 178.239.60.18

    Read the article

  • How can I use smbclient to connect to Windows shares by hostname when a firewall is enabled?

    - by skyblue
    I can't connect to file shares on Windows computers using smbclient -L //hostname when the firewall is enabled. This occurs whether I'm using ufw (which allows outgoing traffic and replies back in with the default configuration) or iptables (where I'm allowing outgoing traffic and replies back in with iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT). However, smbclient -L //ip-address works whether the firewall is enabled or not. I also tested this against a Samba server running on Ubuntu and again smbclient -L //hostname does not work when the firewall is enabled, but smbclient -L //ip-address works whether the firewall is enabled or not. For reference, here are the iptables rules I used during testing: *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -d 224.0.0.251/32 -p udp -m udp --dport 5353 -j ACCEPT COMMIT

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >