Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 164/314 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• replace controller, add second controller, or use expander?

  - by longneck

  I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I plan to add the HP 516914-B21 drive cage, which gives me 8 more SFF drives, bringing the total to 16. To get the additional 8 drives connected, I have one of three choices: Install a new controller that can support 16 drives. Install a second controller. Install a SAS expander, such as the HP 468406-B21 recommended by HP's spec sheet for my server. My question is: how do I know if I'm going hit a performance ceiling by putting 16 drives on the P410i or using the expander? And if I am, how do I select an appropriate controller? I'm not sure what specifications I should be looking at.

  Read the article

• Can my ISP find out if my wireless is protected or not?

  - by Zakukashi

  Im just wondering how much my ISP knows about my activities. I have a Modem from them this modem then connects to a SITCOM wireless router which then leads to MY PC's, Phones, Laptops. I really need to know if my ISP knows if my router is in unprotected state of wireless or not. The Sitcom box it not theirs, we payed for it long after getting this internet. Does my Sitcom wireless router send data to my ISP on its own, indicating delicate information such as wireless protection on or off? Or does the ISP's modem fish out this information on its own since our wireless router is connected to it? Would greatly appreciate any answer.

  Read the article

• EC2 server in VPC stops responding after joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• CPU sometimes hangs at 50% maximum on Windows 8

  - by Martin.

  Recently I installed Windows 8 on my HP ProBook 6450b and it appears I've got problems when using more than one program at once. Sometimes, when I run multiple programs at once, CPU hangs at 49% and never goes up. I suspect it has something to do with CPU throttling, because sometimes it just goes over 49%. I've got my notebook connected to charger and my plan is set to "Active cooling". The weird thing is that this happens only occasionally. I found nothing in my BIOS that could change this kind of things.

  Read the article

• Host hijacks USB printer from VirtualBox machine

  - by jackhab

  I have Ubuntu 9.1 running Windows XP in VirtualBox. Windows XP is a print server (there is no Linux driver for our printer). The printer is connected via USB and its USB filter is added to virtual machine settings. The problem is that every several hours Ubuntu tries to access the printer (trying to install it) and disconnects it from the virtual machine. The printer remains disconnected until I connect it again manually. I thought it is a problem with Windows power management but disabling sleep/standby in Windows didn't help. Please, advise.

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• TFTP PUT Failing Across Hosts

  - by Jason

  I have a TFTP server installed on a CentOS host. /etc/xinetd.d/tftp: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/lib/tftpboot per_source = 11 cps = 100 2 flags = IPv4 } If I try to PUT a file from a remote host to the host running the TFTP server, I get Transfer Timed Out - however, it does create the file in /var/lib/tftpboot but the file is empty. If I tftp from the tftp server to itself (localhost) and PUT a file, it works fine. I have verified that SELinux is disabled and IPTables are turned off. I can connect from the remote hosts with no issue - just seems to be the PUT I have issue with: [root@SVR01 TEST]# tftp 10.100.2.15 tftp> status Connected to 10.100.2.15. Mode: netascii Verbose: off Tracing: off Literal: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp>

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• Why is my iPhone WIFI so slow at home?

  - by John Fouhy

  When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

  Read the article

• How to troubleshoot ping request time out [closed]

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• Do most front and rear USB connections deliver the same power and performance?

  - by Bratch

  I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• How to access USB stick content from VMWare running Ubuntu 10.10?

  - by JVerstry

  Hi, I am running Ubuntu 10.10 via VMWare under Windows 7. I have followed the procedure to install the USB stick. It is now connected to the host. However, I don't know how to access the content of the stick. My Google research indicates that this may be a mounting issue. I read somewhere that I should check /proc/bus/usb, but the usb directory does not exist in /proc/bus. Unfortunately, I am not a Linux expert at this. The ultimate issue I am trying to solve is the one describe here. I am trying to use vi to create ~/.vmware/config, but it is virtually impossible to use vi, since I don't have access to the arrow keys (chicken & egg problem). I have created the config file on my usb stick and want to copy it where it should be. Thanks!

  Read the article

• Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

  - by Gary

  I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

  Read the article

• FTP - 530 Sorry, the maximum number of clients…?

  - by Luca Filosofi

  Hi All! My problem is that my FTP work great, exept when i upload files on a particular client server! on this server happen that some files are uploaded fine and others not, they stop while uploading at half of it's size, then this error is displayed: 530 Sorry, the maximum number of clients (4) from your host are already connected. Unable to make a connection. Please try again. Obviously this is not true, i'm the only one that is uploading! Anyone had the same experience with this!? PS: i have tried many different FTP, all display the same error or just hung up! Thank's

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• Accidentally ejected my Verbatim drive and can't get the icon back

  - by Erin

  Hi, I have time machine running on my iMac OSX v10.5.8 and also have a Verbatim 1TB attached that I use as a workspace/scratchdisk so I can manipulate large music files before I transfer them. However, when cleaning behind my computer the other day I think I dislodged the connection (or maybe one of the kids hit the eject button, i don't know) however, I've re-booted many times and it's not reconnected. It doesn't appear in my disc utility windown and I don't know how to get the icon back! I've looked in time machine but it doesn't appear there at all (cos it's not supposed to I think - it's not connected - my mate hooked it up for me and he won't return my calls!). Help. I don't know how to get it back! Sorry for being a plank.

  Read the article

• Outlook 2003 won't send mail

  - by Ho Li Cow

  A colleague's e-mail has just started playing up - he's using Outlook/Office 2003 on a Win XP SP3 machine. Yesterday his mail has suddenly stopped being received, although there are no errors of any kind that i can see. It was only noticed because he didn't have any replys all day. His e-mails seem to send fine - no errors come up, the mail goes into Sent Items as usual, but it never arrives at it's destination. However, when mail is sent from Outlook Web Access, e-mails send fine. All connections to the server appear fine and outlook is 'connected' but I've had a look at the message tracking on our Exchange 2003 server and no messages are appearing when sent from outlook, only when sent through OWA. Where should i be looking ? Thanks.

  Read the article

• Outlook 2003 won't send mail

  - by RKid

  A colleague's e-mail has just started playing up - he's using Outlook/Office 2003 on a Win XP SP3 machine. Yesterday his mail has suddenly stopped being received, although there are no errors of any kind that i can see. It was only noticed because he didn't have any replys all day. His e-mails seem to send fine - no errors come up, the mail goes into Sent Items as usual, but it never arrives at it's destination. However, when mail is sent from Outlook Web Access, e-mails send fine. All connections to the server appear fine and outlook is 'connected' but I've had a look at the message tracking on our Exchange 2003 server and no messages are appearing when sent from outlook, only when sent through OWA. Where should i be looking ? Thanks.

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >