Search Results

Search found 11050 results on 442 pages for 'video cards'.

Page 161/442 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

  • Graphics Card Compatability

    - by Aaron
    I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

    Read the article

  • I have no sound in my Media players

    - by Lefteris Gkinis
    I have Windows Professional x64 with two sound cards. for many months these cards (and the all sound system) was working fine. Suddenly my System (my PC) stops having sound. from WINDOWS MEDIA PLAYERS and for any other media players The default sounds from windows are working fine but I don't have sounds from media players. Also I open the "Sounds And Audio Device Properties" and in "Volume"Tab I press "Advance". There I receive an error "DirectSoundSetting not available". I have already Uninstall and re install my sound cards... But Nothing. Did anyone knows where the problem is?

    Read the article

  • Motherboard dual gfx power question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • weighted RNG speed problem in C++

    - by supert
    I have a (fast) bit of C++ code that samples cards from a 52 card deck: void sample_allcards(int table[5], int holes[], int players) { int temp[5 + 2 * players]; bool try_again; int c, n, i; for (i = 0; i < 5 + 2 * players; i++) { try_again = true; while (try_again == true) { try_again = false; c = fast_rand52(); // reject collisions for (n = 0; n < i + 1; n++) { try_again = (temp[n] == c) || try_again; } temp[i] = c; } } copy_cards(table, temp, 5); copy_cards(holes, temp + 5, 2 * players); } I am implementing code to sample the hole cards according to a known distribution (stored as a 2d table). My code for this looks like: void sample_allcards_weighted(double weights[][HOLE_CARDS], int table[5], int holes[], int players) { // weights are distribution over hole cards int temp[5 + 2 * players]; int n, i; // table cards for (i = 0; i < 5; i++) { bool try_again = true; while (try_again == true) { try_again = false; int c = fast_rand52(); // reject collisions for (n = 0; n < i + 1; n++) { try_again = (temp[n] == c) || try_again; } temp[i] = c; } } for (int player = 0; player < players; player++) { // hole cards according to distribution i = 5 + 2 * player; bool try_again = true; while (try_again == true) { try_again = false; // weighted-sample c1 and c2 at once double w[1326]; memcpy(w, weights[player], sizeof(w)); // h is a number < 1325 int h = weighted_randi(w, HOLE_CARDS); // i2h uses h and sets temp[i] to the 2 cards implied by h i2h(&temp[i], h); // reject collisions for (n = 0; n < i; n++) { try_again = (temp[n] == temp[i]) || (temp[n] == temp[i+1]) || try_again; } } } copy_cards(table, temp, 5); copy_cards(holes, temp + 5, 2 * players); } My problem? The weighted sampling algorithm is a factor of 10 slower. Speed is very important for my application. Is there a way to improve the speed of my algorithm to something more reasonable? Am I doing something wrong in my implementation? Thanks.

    Read the article

  • Why does this program stop running?

    - by designloper
    Hi everyone....I am developing a card making system...nothing fancy. Right got this far but program now stops running with no error when running after the first card sample i.e. " Enter 'OK' if this card is OK, otherwise enter an alternative border character: + ". Any suggestions Java Masters? //Ask user for input //makes use of print line method System.out.println("Enter name: "); //took the variables //called the object of the scanner 'cardOrder' //and use the Scanner objects method '.nextLine' //to read the next line of the input firstName = cardOrder.nextLine(); mInitial = cardOrder.nextLine(); lastName = cardOrder.nextLine(); //Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "**************" + "**************" + firstName + mInitial + lastName + "\n* *" + "\n*" + " " + firstName + mInitial + lastName + " *" + "\n* *\n" + firstName + mInitial + lastName +"**************" + "**************" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: + "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); //test if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } else if(b == optionA) { //Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "++++++++++++++" + "++++++++++++++" + firstName + mInitial + lastName + "\n+ +" + "\n+" + " " + firstName + mInitial + lastName + " +" + "\n+ +\n" + firstName + mInitial + lastName +"++++++++++++++" + "++++++++++++++" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: OK "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } } else if (c == optionA) {//Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "**************" + "**************" + firstName + mInitial + lastName + "\n* *" + "\n*" + " " + firstName + mInitial + lastName + " *" + "\n* *\n" + firstName + mInitial + lastName +"**************" + "**************" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: + "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } }

    Read the article

  • Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

    - by andrewbrust
    The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

    Read the article

  • Paper Gold Rush

    - by Chris G. Williams
    The last few days at the shop have been reminiscent of a marathon of Pawn Stars. Quite a few people have come in wanting to trade for store credit. Most of them have left disappointed. We did pick up a few things here and there (which hopefully I can sell.) The problem, in a nutshell, is that people get it in their head that a (YuGiOh) card is worth X amount because they looked it up 2-3 years a...go, or someone told them it was valuable... then they play it in their deck for a year without sleeves, and cram it in a binder covered in duct tape. By the time they bring the cards in to me, new sets have come out which often de-value the tournament usefulness of the card from $20 to *maybe* 50 cents, in mint condition. Which means I can offer them about 10-15 cents... only they are almost never in mint condition, which means I usually offer them nothing at all. Most of the time, you can watch their smile fade as I start going through their cards. It's kinda sad, really, since I know they think they've spent the last two years walking around with the keys to their own personal gold mine. I don't really enjoy seeing that look on a child's face. I like kids and I remember those moments when perception and reality crashed headlong into each other. It was seldom pretty. So, when I'm talking to a child, I try to take it easy on them and give them some suggestions on how to better preserve their cards. Sometimes though, it's an adult. Depending on the situation, my response to them varies pretty broadly. Most of the time though, I still feel pretty bad when it doesn't go their way.

    Read the article

  • SQL Contest – Result of Cartoon Contest

    - by pinaldave
    Earlier we had an excellent contest ran with the help of Embarcadero Technologies. We had two different contests on the same day sponsored by the kind folks at Embarcadero. Here are the details of the winners. 1) Win USD 25 Amazon Gift Cards (10 Units) We had announced that we will award USD 25 Amazon Gift Cards to 10 lucky winners who will download the DB Optimizer between Nov 29 to Dec 8. Here is the name of the winners. Winners will get Amazon Gift Cards USD 25 in the next 5 days of this blog post to their registered email address. If you do not receive the card, do send me email (Pinal at sqlauthority.com) and I will follow up on the details. Name of the winners: Ramdas Narayanan Krishna Uppuluri Donna Kray Santosh Gupta Robert Small Samit Bhatt Bernd Baumanns Rodrigo Oriola Jim Woodin Alfred Sandou 2) Win Star Wars R2-D2 Inflatable R/C We had cartoon contest. If you have not read the cartoon – I suggest you go over this cartoon story one more time. The task was to give the correct answer with some interesting note along with it. We selected a few good quotes and put them together. We later on picked the winner by using random algorithm. The winner gets fantastic Star Wars R2-D2 Inflatable R/C. Name of the winner: Aadhar Joshi. He wins R2-D2. You can read his comment over here. Thank you all for participating in the contest – this was fun – if you have liked it do let me know and we will come up with something new for you next time. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Need a PCIe desktop graphics card for dual-monitor

    - by Graham
    I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

    Read the article

  • Computer Bugs - Etymology and Entomology

    - by PointsToShare
    Whatever bugs you My wife and I used to take some of our summer vacation I a cabin on the shore of Lake Atsion in NJ. I t is a delightful place in the Wharton forest with Brown yet fresh water, where we would canoe, swim and enjoy true rest. Alas, in the last few years, yellow flies also discovered the area’s pastoral delights and came in hoards to bug us. So much so that we had to give up. As a computer programmer I abhor bugs. The bugs that bug me – except the pesky yellow flies – are program bugs , a specific variety of computer bugs. You can find an excellent take on the etymology of the word ‘bug” in this delightful monogram: http://www.jamesshuggins.com/h/tek1/first_computer_bug.htm In my youth, I worked on Burroughs computers. Unlike their IBM brethren, the Burroughs used a 96 column card. The cards were much smaller than the 80 column IBM cards. We wrote our programs on coding sheets and then a key-punch operator transcribed them into punched cards. These were fed into a card reader and compiled. The compiler would notify us of compiler errors or bugs, but it was not always easy to get the meaning of the message. My friend Mark Wildt, also a Burroughs veteran, gave me an old punched card from one of his programs. Obviously a bug!! Here It Is!! That’s All Folks!

    Read the article

  • How can I Implement KeyListeners/ActionListeners into the JFrame?

    - by A.K.
    I'll get to the point: I have a player in my game that you control with the keyboard yet the key methods in the player class and ActionListener w/ KeyAdapter in the Board class don't seem to fire. So far I've tried adding these key methods into the JFrame, doesn't seem to let me move him even though other objects that I have (enemies) can move fine. Here's part of the JFrame class with the event listeners: frm.addKeyListener(KeyBoardListener); public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } public KeyListener KeyBoardListener = new KeyListener() { @Override public void keyPressed(KeyEvent args0) { int key = args0.getKeyCode(); if(key == KeyEvent.VK_LEFT) { nBoard.S.vx = -4; } if(key == KeyEvent.VK_RIGHT) { nBoard.S.vx = 4; } if(key == KeyEvent.VK_UP) { nBoard.S.vy = -4; } if(key == KeyEvent.VK_DOWN) { nBoard.S.vy = 4; } if(key == KeyEvent.VK_SPACE) { nBoard.S.fire(); } } @Override public void keyReleased(KeyEvent args0) { int key = args0.getKeyCode(); if(key == KeyEvent.VK_LEFT) { nBoard.S.vx = 0; } if(key == KeyEvent.VK_RIGHT) { nBoard.S.vx = 0; } if(key == KeyEvent.VK_UP) { nBoard.S.vy = 0; } if(key == KeyEvent.VK_DOWN) { nBoard.S.vy = 0; } } @Override public void keyTyped(KeyEvent args0) { // TODO Auto-generated method stub } };

    Read the article

  • Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

    - by nightfly
    I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

    Read the article

  • Another guvcview issue? Core dump!

    - by user290498
    guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

    Read the article

  • Finishing an iteration early

    - by f1dave
    I'd like some input on this on those working with agile methodologies... A current project is finding that development on our planned user stories is finishing some time before the end of the iteration, and that the testing effort and business acceptance is what's actually dragging us out longer towards the end. This means that the devs in question have spare time, and they're essentially going out to the iteration+1 backlog and starting work on cards there before our current iteration cards are 'done'. As iteration manager, I want to put a stop to this - I want a more team-orientated approach where the group takes ownership of getting all the cards done, as opposed to "Well, dev's done so what do I dev next?" The problem I face is convincing the team of this. On one hand, I understand why the devs don't want to test the code they've written (there are unit tests they write of course, but the manual testing to be done could be influenced by their bias). The team sees working ahead as making our next iterations easier, because a lot of the work is done before we start. I see this as screwing with the whole system of planning/actuals - but it's difficult to convince the team as to why this matters. What advice can you guys and girls give? How do we stop devs reaching ahead? What should they be doing instead? How much of a problem is this in the scheme of things, if things are still getting done?

    Read the article

  • CodePlex learns to talk to other services!

    CodePlex is now able to talk to other services! For example, if you want CodePlex to tell Trello to update cards on your Trello board, it can do it. Or if you want CodePlex to notify your Campfire chat room when updates are pushed, it can do that too. To start off, we are going to be adding support for the following services: Campfire – Notify a Campfire chat room when commits occur HipChat – Notify a HipChat chat room when commits occur Trello – Add commit summaries to Trello cards by referencing those cards in commit messages Twitter – Notify your Twitter followers when updates are pushed to your project In addition, we will continue to support our existing integrations with Windows Azure – Continuously deploy to Windows Azure on pushes (For Git and Hg projects) AppHarbor – Continuously deploy to AppHarbor on pushes To set up these integrations for your project, navigate to the project settings page as a project coordinator, and click on the services section as seen below:   While we are starting with these six services, the infrastructure is now in place to allow us to quickly roll out new integrations. We would love to hear which services and integrations you would like to see most on our suggestions page. We realize that there are some services and URLs that only make sense for your project to send notifications to. To support this scenario, we plan to add generic web hooks in the near future. Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @Rick_Marron.    

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

    - by Asian Angel
    This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

    Read the article

  • Slow draw on some apps and dynamic clocks not working properly with ATI/AMD proprietary drivers

    - by Rakeka
    I've recently purchased a new computer (around July 2010) and I've been having some problems with proprietary video drivers on Linux. The hardware is: Video: ATI/AMD Radeon HD 5870 (XFX HD-587X-ZNFC); Motherboard: Asus P7P55D-E Deluxe; Processor: Intel i5 750; Memory: Kingston Hyperx KHX1600C8D3K2/4GX (2x - 8GB Total); Power Supply: XFX P1-750B-CAG9; There are no overclocks, not even the memories (they are at 1333mhz due processor memory controller limitation). The operational system is a homebrew Linux distribution with the following software: Architecture: x86_64 (multilib) Kernel: 2.6.35.10 Xorg: 7.5 Window Manager: wmii-3.9.2 Video Driver: ATI/AMD Catalyst 10.12 There are no desktop effects programs like compiz fusion or beryl. The problems: With ATI/AMD proprietary driver, some applications are with slow draw/redraw, and, the same applications make the driver to increase the card clocks to maximum (0% gpu activity, only the clocks are increased). I dunno exactly how to describe the slow draw but I'll list some applications and symptoms. xterm Flickers a lot when drawing continuous output; When I'm in a workspace with fullscreen xterm, The gpu load stays at 12% in idle, and, with smaller xterm, smaller GPU load. "aticonfig --odgc" output: Default Adapter - ATI Radeon HD 5800 Series Core (MHz) Memory (MHz) Current Clocks : 157 300 Current Peak : 850 1200 Configurable Peak Range : [600-900] [900-1300] GPU load : 12% "aticonfig --pplib-cmd 'get activity'" output: Current Activity is Core Clock: 157MHZ Memory Clock: 300MHZ VDDC: 950 Activity: 12 percent Performance Level: 0 Bus Speed: 5000 Bus Lanes: 16 Maximum Bus Lanes: 16 More examples: mplayer time info flickers on terminal; "find /" flickers a lot (It takes some time to stop with control-c. But, If I change the workspace or put some window upon it, just after the control-c, it stops instantly); "cat somefile" if the file is big (Xorg.0.log for example) it takes some time to display; vim and less (ex: find / | less) don't have much problems, just a little flicker when scrolling; mplayer (no gui) Slow reproduction and seek with -vo x11; Tearing with -vo xv; Time info flickers on terminal (xterm consequence); gvim A little slow draw when scrolling with page up/page down; Firefox Slow draw/redraw on some pages like www.boadica.com.br and sometimes on www.youtube.com with flash enable (never noticed on many pages); Corruptions when informative yellow boxes are showing and scroll the page (an gray box appears at the same place of the informative box); "Wallpaper" After minimizing a fullscreen window or changing to an empty workspace it takes some time to redraw wallpaper. "Video Card" The core and memory clocks are increased with the events described above and on other situations like change workspace (even without wallpaper), minimize, maximize or move a window; Idle clocks: Core: 157mhz, Memory: 300mhz Full clocks: Core: 850mhz, Memory: 1200mhz xpdf Painful slow scrolling; display (from ImageMagick) Slow menus and sometimes slow image redraw; Programs that I use and are apparently without problems: gimp; pidgin; mplayer (-vo gl, gl2); blender; unigine heaven (better fps than on Windows); doom3; tibia; penumbra overture; amnesia the dark descent (wine); diablo 2 (wine); No problems on Windows (Windows 7 Ultimate 64bit). And special note to this: Full desktop effects from Debian and Ubuntu gnome appearance cpanel don't cause ANY problems, even the core and memory clocks don't increase when change workspace, minimize, maximize or move a window. What I've tested: Unsuccessful tests: Tested all drivers versions since 10.6 (released approximately when I've installed the first slackware in this PC); Tested other video card - ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Tested some options on xorg.conf and that I've found googling (some of these options are commented on my xorg.conf. I'll send the links at the end of post); Tested some patches like 107_fedora_dont_fill_bg_none.patch and xserver-xorg-backclear.patch from Arch Linux Catalyst page (https://wiki.archlinux.org/index.php/ATI_Catalyst); Tested other distros and software versions: Tested XORG-7.6 on my own distribution; Tested Debian Squeeze (testing - from 2010-12-20); Tested Ubuntu Marverick (10.10); Tested Slackware 13.1; Distros info: Architecture: i386 Debian and Ubuntu with all default software (kernel, gnome, xorg, drivers); Slackware with Catalyst from AMD page and default window managers like: fvwm, xfce, and my own build of wmii; Successful tests: Tested other video card (only on my homebrew distro) - NVIDIA Geforce 7300GS with driver 260.19.29; That didn't shown the slow draw problems, but that card is a bit obsolete, so, dunno if that lacks features like the dynamic clocks. I don't dispose of other video cards like nvidia g/gt/gts/gtx 200~400~500 or Radeon HD 3000/4000/6000 to make more tests. Tested other hardware: Video: ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Motherboard: Intel DG31PR; Processor: Core 2 Duo E6750; Software for that hardware: Fresh install of same distros (except for the mine) with same program versions; That video card (HD 5570) were full time at the maximum clocks (something like 500/750, don't remember) in all the operational systems (Windows XP and Windows 7 too), but it didn't shown the same problems that I have here. I've googled a lot about common problems with ATI/AMD proprietary drivers for Linux and didn't find similar problems, except by the Firefox corruptions, that the solutions were to disable ATI Direct2DAccel and use XAA. With XAA the problems persists and the other applications like pidgin and rest of Firefox showed the same problems of slow draw/redraw. Open source Drivers: With open source drivers (xf86-video-ati-6.13.2) I hadn't the same slow draw problems, but, had other problems, that, for now, make it no viable solution. I'll not discuss it here because this is another line of problems and will confuse everything. If it happens to be the only solution, I'll make another thread to discuss it. Logs and Configs: kernel .config dmesg xorg package list xorg.conf Xorg.0.log

    Read the article

  • moviePlayBackDidFinish: is not called in application.

    - by srikanth rongali
    In my application I have used these notifications when playing a video. But, The problem is the control of the program is not entering in to the first two methods(moviePreLoadDidFinish and moviePlayBackDidFinish). It is entering into last method. So, after the video is played and I pressed Done button in the video, I cannot touch any object in screen. I mean I used play button for video to play in a view. After the video played the play button is deactivated. - (void) moviePreloadDidFinish:(NSNotification*)notification { } // Notification called when the movie finished playing. - (void) moviePlayBackDidFinish:(NSNotification*)notification { } // Notification called when the movie scaling mode has changed. - (void) movieScalingModeDidChange:(NSNotification*)notification { } I could not get where I was wrong ? Thank You.

    Read the article

  • How do I get a list of child elements from XDocument object?

    - by Nick
    Hello.. I am trying to get all of the "video" elements and their attributes from an XML file that looks like this: <?xml version="1.0" encoding="utf-8" ?> <videos> <video title="video1" path="videos\video1.wma"/> <video title="video2" path="videos\video2.wma"/> <video title="video3" path="videos\video3.wma"/> </videos> The following will only select the root node and all of the children. I would like to get all of the 'video' elements into the IEnumerable. Can someone tell me what I'm doing wrong? IEnumerable<XElement> elements = from xml in _xdoc.Descendants("videos") select xml; The above returns a collection with a length == 1. It contains the root element and all the children.

    Read the article

  • saving the videos and photos in iPhone Simultor 4.0

    - by Mohammed Sadiq
    Hi All, From 4.0 apple has extended their api support to access the videos and photos from the phone. I am using only iPhone 4.0 simulator to test my application. When I try to save the video as apple has mentioned in their api docs, its giving the error something like "Error Saving the Asset". The way I try to store the video is as follows : ALAssetsLibraryWriteVideoCompletionBlock _videoCompblock = ^(NSURL *assetURL, NSError *error){ if(assetURL) { NSLog(@"Video AssetUrl : %@", [assetURL absoluteString]); } else if(error) { NSLog(@"The Error occured : %@", [error localizedDescription]); } }; BOOL isSupported = [library deoAtPathIsCompatibleWithSavedPhotosAlbum:videoFileUrl]; if(isSupported) { [library writeVideoAtPathToSavedPhotosAlbum:videoFileUrl completionBlock:_videoCompblock]; } The above methods should print the url of the video on successful saving of the video file. But its printing the error message as "ERROR SAVING THE ASSET". Any idea or help on this topic will be greatly appreciated. Best Regards, Mohammed Sadiq.

    Read the article

  • Streaming desktop with avconv - severe sound issues

    - by Tommy Brunn
    I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

    Read the article

  • Android VideoView plays 2 videos at the same time

    - by evosoft
    I ma trying to play a videoview on top of another video view. the first video view is paused, while the second is playing. It appears to work but no second video appears on he screen (though I hear the audio and see the controls that would normally appear on top). I am assuming this is some sort of Zorder issue. Any thoughts. By the way, I have no problem displaying other views on top of the main video view and having the video fill the background.

    Read the article

  • AppHarbor - Azure Done Right AKA Heroku for .NET

    - by Robz / Fervent Coder
    Easy and Instant deployments and instant scale for .NET? Awhile back a few of us were looking at Ruby Gems as the answer to package management for .NET. The gems platform supported the concept of DLLs as packages although some changes would have needed to happen to have long term use for the entire community. From that we formed a partnership with some folks at Microsoft to make v2 into something that would meet wider adoption across the community, which people now call NuGet. So now we have the concept of package management. What comes next? Heroku Instant deployments and instant scaling. Stupid simple API. This is Heroku. It doesn’t sound like much, but when you think of how fast you can go from an idea to having someone else tinker with it, you can start to see its power. In literally seconds you can be looking at your rails application deployed and online. Then when you are ready to scale, you can do that. This is power. Some may call this “cloud-computing” or PaaS (Platform as a Service). I first ran into Heroku back in July when I met Nick of RubyGems.org. At the time there was no alternative in the .NET-o-sphere. I don’t count Windows Azure, mostly because it is not simple and I don’t believe there is a free version. Heroku itself would not lend itself well to .NET due to the nature of platforms and each language’s specific needs (solution stack).  So I tucked the idea in the back of my head and moved on. AppHarbor Enters The Scene I’m not sure when I first heard about AppHarbor as a possible .NET version of Heroku. It may have been in November, but I didn’t actually try it until January. I was instantly hooked. AppHarbor is awesome! It still has a ways to go to be considered Heroku for .NET, but it already has a growing community. I created a video series (at the bottom of this post) that really highlights how fast you can get a product onto the web and really shows the power and simplicity of AppHarbor. Deploying is as simple as a git/hg push to appharbor. From there they build your code, run any unit tests you have and deploy it if everything succeeds. The screen on the right shows a simple and elegant UI to getting things done. The folks at AppHarbor graciously gave me a limited number of invites to hand out. If you are itching to try AppHarbor then navigate to: https://appharbor.com/account/new?inviteCode=ferventcoder  After playing with it, send feedback if you want more features. Go vote up two features I want that will make it more like Heroku. Disclaimer: I am in no way affiliated with AppHarbor and have not received any funds or favors from anyone at AppHarbor. I just think it is awesome and I want others to know about it. From Zero To Deployed in 15 Minutes (Or Less) Now I have a challenge for you. I created a video series showing how fast I could go from nothing to a deployed application. It could have been from Zero to Deployed in Less than 5 minutes, but I wanted to show you the tools a little more and give you an opportunity to beat my time. And that’s the challenge. Beat my time and show it in a video response. The video series is below (at least one of the videos has to be watched on YouTube). The person with the best time by March 15th @ 11:59PM CST will receive a prize. Ground rules: .NET Application with a valid database connection Start from Zero Deployed with AppHarbor or an alternative A timer displayed in the video that runs during the entire process Video response published on YouTube or acceptable alternative Video(s) must be published by March 15th at 11:59PM CST. Either post the link here as a comment or on YouTube as a response (also by 11:59PM CST March 15th) From Zero To Deployed In 15 Minutes (Or Less) Part 1 From Zero To Deployed In 15 Minutes (Or Less) Part 2 From Zero To Deployed In 15 Minutes (Or Less) Part 3

    Read the article

  • get particular string using regex java

    - by hussain
    i want to know how to get the string from group of string String j = "<a href=\"/watch?v=4Qx-lBqOqiQ&feature=popular\" onclick=\"\" onmousedown=\"yt.analytics.urchinTracker(\'/Events/Home/PersonalizedHome/POP/Logged_Out');\" ><span class=\"video-thumb video-thumb-220 \" id=\"video-thumb-4Qx-lBqOqiQ-8821469\"><img src=\"http://i1.ytimg.com/vi/4Qx-lBqOqiQ/hqdefault.jpg\" class=\"vimg220\" alt=\"Dog Squirrel Chasing A Squirrel\" title=\"Dog Squirrel Chasing A Squirrel\" onclick=\";yt.www.watch.watch5.IEshenanigans(event, this)\"><span class=\"video-time\"><span>1:08</span></span><span class=\"video-actions\"><button class=\"yt-uix-button-short yt-uix-button yt-uix-button-arrowbutton\" onclick=\"; return false;\" type=\"button\"> <img class=\"yt-uix-button-arrow\" src=\"http://s.ytimg.com/yt/img/pixel-vfl73.gif\" alt=\"\"> hai</a>"; i want to get the string href=\"/watch?v=4Qx-lBqOqiQ&feature=popular\" and src=\"http://i1.ytimg.com/vi/4Qx-lBqOqiQ/hqdefault.jpg\" thanks and advance

    Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >