Search Results

Search found 6270 results on 251 pages for 'keyboard repair'.

Page 162/251 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • Touchpad stopped working after suspend, never woke up again

    - by Luca
    I have a Toshiba L650, installed (dual boot) Ubuntu 10.10. Touchpad worked fine until I tried for the first time to suspend (I closed the screen on the keyboard). The system never woke up again. Reset (battery disconnected and then reconnected), restart of the system, disk checks, and so on. After that, everything works fine except the Touchpad, completely dead. Rebooted again. The problem persists. Any hints? Thanks, Luca.

    Read the article

  • Demo on Data Guard Protection From Lost-Write Corruption

    - by Rene Kundersma
    Today I received the news a new demo has been made available on OTN for Data Guard protection from lost-write corruption. Since this is a typical MAA solution and a very nice demo I decided to mention this great feature also in this blog even while it's a recommended best practice for some time. When lost writes occur an I/O subsystem acknowledges the completion of the block write even though the write I/O did not occur in the persistent storage. On a subsequent block read on the primary database, the I/O subsystem returns the stale version of the data block, which might be used to update other blocks of the database, thereby corrupting it.  Lost writes can occur after an OS or storage device driver failure, faulty host bus adapters, disk controller failures and volume manager errors. In the demo a data block lost write occurs when an I/O subsystem acknowledges the completion of the block write, while in fact the write did not occur in the persistent storage. When a primary database lost write corruption is detected by a Data Guard physical standby database, Redo Apply (MRP) will stop and the standby will signal an ORA-752 error to explicitly indicate a primary lost write has occurred (preventing corruption from spreading to the standby database). Links: MOS (1302539.1). "Best Practices for Corruption Detection, Prevention, and Automatic Repair - in a Data Guard Configuration" Demo MAA Best Practices Rene Kundersma

    Read the article

  • Upgrade from 11.10 to 12:04 failed

    - by Sandeep Adi
    I upgraded from Ubuntu 11.10 to 12.04 using the update manager. At the end of the upgrade the console said the upgrade had failed and it forced me to restart. After a restart I am not able to do anything other than logging in. I just see a blue screen with the ubuntu one icon, I can open applications, but nothing beyond that. I opened the terminal but after that the keyboard is not being recognized. Basically the laptop is now rendered useless. Any pointers on how to recover? This is on a Dell Inspiron 1501 laptop with a 64 bit AMD Sempron Processor. Any help would be appreciated. Thanks, Sandeep

    Read the article

  • Standby Problem, PC can not enter Standby mode

    - by Leon95
    I have a problem with the Standby function: My Computer does not enter the Standby mode with Ubuntu 14.04LTS. If I remeber me right it, works with Ubuntu 13.10 but this Version was not long installed on this PC. Now when i press Standby in the menu or on my Keyboard the Display turns black for a few seconds, then some messages appear for a very short moment on the screen. After that, the the log-in screen appear. Two times I was able to enter Standby but the other times it fails. Tecnical Data about my PC: Ubuntu 14.04 with all Updates main storage: 3,8GiBprocessor: Intel® Core™ i3-2330M CPU @ 2.20GHz × 4 graphic: Intel® Sandybridge Mobile graphic board: NVIDA GEFORCE GT 555M CUDA 1GB Dual Boot System with win7 x64Bit Medion P6812 Laptop Here is the message output: Usally I got only a half of the screen filled with messages like that. When I filmed it it was much more. I dont know, maybe this is a Bug.

    Read the article

  • Why did ctrl-f stop working in LibreOffice?

    - by amandabee
    I've basically settled into Unity, but one constant that is kind of giving me agita is that in LibreOffice Calc (and Writer) ctrl-f does nothing. I can go to edit > find ... and the edit menu even suggests ctrl-f as a keyboard shortcut, but actually typing it doesn't do anything. ctrl-alt-f works fine. The only thing that doesn't work is ctrl-f. I had a really hard time getting settled with Unity (mostly trying to get my old Gnome-do and Compiz settings back) so I spent a lot of time monkeying with the Compiz Settings Manager. But I can't figure out where I would have unset/ overrode this. Plus, it isn't like ctrl-f does something unexpected. It just does nothing.

    Read the article

  • Push or Pull Input Data In the Game Logic?

    - by Qua
    In the process of preparing my game for networking I'm adding a layer of seperation between the physical input (mouse/keyboard) and the actual game "engine"/logic. All input that has any relation to the game logic is wrapped inside action objects such as BuildBuildingAction. I was thinking of having an action processing layer that would determine what to do with the input. This layer could then be set up to either just pass the actions locally to the game engine or send it via sockets to the network server depending on whether the game was single- or multiplayer. In network games it would make sense that the player's actions should be sent to the server, but should the game logic be pulling (polling?) the data through some sort of interface or should the action processing layer be adding the actions to an input queue in the game logic code?

    Read the article

  • How to reset settings when Unity won't finish booting?

    - by Emre
    I have a new 12.04 installation and I messed things up after trying to move /home to an NTFS partition, which I later learned was a bad idea. I removed references to the NTFS partition on fstab and created new users on the ext4 / partition. Now I can't get Unity to start up properly for any user. I get the GUI with only three Launch icons (none of which are clickable) and no bar at the top. The keyboard seems to the nonfunctional after I enter my credentials. The interesting thing is that I can boot when I go through recovery mode and select resume. I wonder whether I am creating the new users properly. What is the correct protocol for doing so in order to ensure that they can run Unity?

    Read the article

  • Pair Programming: Pros and Cons

    - by O.D
    I need some experience reporting from the ones who have done pair programming, I noticed that lots of people recommend it but my experience was that at one point it's more efficient to sit alone, think and then write code than to talk with the other programmer (which can be very annoying to other programmers in the same office), do you agree to this? and if yes can you mention situations where pair programming is less efficient than traditional programming? Actually, I'm more interested in Cons than in Pros, but if it's your own experience I would like to read both, the Cons and the Pros. I would like to read what you think about the Programmer who doesn't have the keyboard, what can he do in the meanwhile other than talking about the concept? or checking the code on the screen?

    Read the article

  • Dual-Boot Windows 7 and Ubuntu 12.04.1

    - by z3matt
    I installed Ubuntu 12.04.1 alongside Windows 7. I wanted to check out what it's all about. By the way, i actually like the interface a lot and the free office suite is very very nice. I love how they can save to the .docx as well. Onto the story: I installed it using this tutorial and I set it all up and everything and things were great. I used the EasyBCD 2.2 Tool and created an Ubuntu 12.04.1 entry and when I boot the computer the Windows 7 and Ubuntu 12.04.1 option show up. However, when I click Ubuntu it does not boot. It say and error and says I must put in the Windows CD to repair or something like this. Here's my system specs: ASRock Extreme4 (EUFI BIOS) Corsair Vengaence 2x4GB nVidia GeForce 9800GT i5-3570K 3.4GHz Corsair 620W Modular 500GB WD Caviar Blue I have no clue what could be wrong with it and I would love any assistance. I am willing to mess around and if something happens wrong I can just reinstall windows and it won't be a huge deal. Thank you very much! Here are my partitions I made: /boot 500MB / 10000MB /home 20000MB swap area 4000MB BIOS 4000MB

    Read the article

  • Build 2012, some thoughts..

    - by Dennis Vroegop
    I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

    Read the article

  • Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

    - by user180782
    Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

    Read the article

  • Geek Deal: Refurbished Kindle Fire for $139; Today Only

    - by Jason Fitzpatrick
    If you’re looking to pick up a Kindle Fire on the cheap, Amazon is offering them–refurbished with a 1-year warranty–for $139. $139 is an even better price than we see on our local Craiglist (where Kindle Fires usually go for $180 or so) and it comes with a 1-year warranty. We’ve purchased several Kindle Keyboard units through Amazon’s refurbished warehouse deals over the last two years and, frankly, we can’t tell them apart from the brand new ones–if you’re looking to pick up a Kindle Fire this is a great deal. Kindle Fire for $139 How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

    Read the article

  • HUD keeps popping up when watching movie in movie player

    - by PNMNS
    When I watch a movie in Movie Player, the HUD pops up every 8 minutes or so. I am not touching the keyboard or the mouse at all. Alt makes the bar go away, and then 7-8 minutes later, it pops up again. This happens when I'm watching fullscreen or not fullscreen. Can you help me fix this? I've been using VLC instead (because it does not have this problem), but I don't like it as much as Movie Player.

    Read the article

  • What would cause SSD to become not detectable?

    - by Balthazar
    I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

    Read the article

  • Terminal will not accept password / terminale non accetta password

    - by elvizz67
    Translation, by Google Translate: I just installed lxde Lubuntu errrato and a terminal command I locked the package management and updates, after erasing software from sources I typed the wrong command sudo apt-get upgrade pero'il terminal asks me the password and the keyboard is not me accept any command. What should I do to unlock? Original text: Ho appena installato lubuntu lxde e per una errrato comando il terminale mi ha bloccato la gestione pacchetti e aggiornamenti, dopo avere cancellato dalle fonti software il comando sbagliato ho digitato sudo apt-get upgrade pero'il terminale mi chiede la password e la tastiera non mi accetta nessun comando. cosa devo fare per sbloccare ?

    Read the article

  • How-To Geek Gets the Microsoft MVP Award, Thanks to You

    - by The Geek
    The How-To Geek has won a Microsoft MVP award for the second year in a row, and it’s all thanks to you, our great readers that keep the site going. Join us for some mutual back-patting and some terrible photography of all the award stuff. Of course, if you’re familiar with the MVP award you’ll probably know that it’s actually for a single person, but in my opinion the award belongs to the entire How-To Geek community, without which this site would be nothing. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Five Sleek Audi R8 Car Themes for Chrome and Iron MS Notepad Replacement Metapad Returns with a New Beta Version Spybot Search and Destroy Now Available as a Portable App (PortableApps.com) ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing

    Read the article

  • Unknown filesystem error

    - by Ben
    My computer has (had) a dual boot of Ubuntu Precise and Windows 7. Recently, when I started the computer, grub gave me an error saying "Unknown filesystem", and sent me to grub rescue. I searched for solutions to this, and found this answer: Unknown filesystem error: grub rescue. I followed the instructions there, but they didn't really help: when I restarted the computer, it went straight to Windows without grub intervening at all (so it boots successfully, just not to the OS I want). This is the log from boot-repair. My Ubuntu partition is sda6. Naturally, I'm a little worried, since the log says "unknown filesystem type ''", which to me looks like the partition might be corrupt somehow. From the Ubuntu Live CD, I started gparted and looked at my partitions, and it also told me that my sda6 is an unknown filesystem. So my questions are basically: Can I restore Ubuntu to the way it was? If not, can I at least rescue the data I had on the partition somehow? Again, if I can't restore Ubuntu, how do I clean everything up so that I can reinstall it without too many complications? Another thing I should mention is that yesterday I had a similar problem where the computer told me there was a problem with the hard drive when it was starting, but it fixed itself by running fsck (that time it got past grub, and managed to start Ubuntu). Between that occasion and me having trouble booting the computer today, I have booted it successfully at least twice. Thanks for any help!

    Read the article

  • External USB 3 drive not recognized

    - by ilan123
    Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

    Read the article

  • How to Make and Install an Electric Outlet in a Cabinet or Desk

    - by Eric Z Goodnight
    If you’re like most geeks, you’re always looking for power—there’s never an outlet where you need one! With this simple how-to, see how you can install an outlet in a desk, cabinet or wherever—right where you need it! It’s simple, fun, and reasonably cheap, so why not install some outlets exactly where you need them? There are kits available to buy online, but these are often quite expensive. See how you can buy off the shelf, stock parts and install an outlet wherever you want to.  How to Make and Install an Electric Outlet in a Cabinet or DeskHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

    Read the article

  • Use Your PC to Keep Yourself Entertained While Traveling for the Holidays

    - by Justin Garrison
    Staying connected may be hard no matter what network you are on, and in flight Wi-Fi isn’t pervasive enough to count on. Here are tips and tricks to keep yourself entertained when unplugged and traveling. Image Via MarinaAvila Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Ubuntu Font Family Now Available for Download Oh No! WikiLeaks Published Santa Claus’s Naughty List [Video] Remember the Milk Now Supports HTTPS Encryption for the Entire Session MTCrypt Is an Efficient Front End for Mounting TrueCrypt Volumes 10 Things You Should Do with Your New Android Phone Walking Through the Park on a Snowy Night Wallpaper

    Read the article

  • (Xubuntu) no touchpad or mouse on Aspire One D270

    - by Sman789
    I installed Xubuntu 12.10 on an Aspire One D270 using a Live USB. Initially, the live USB wouldn't boot, but by running sudo apt-get dist-upgrade on it (on a different machine), I upgraded the kernel and it now works perfectly. However, after installing Xubuntu from the stick onto the D270, neither the touchpad nor an external mouse works. If I use the keyboard to navigate to the mouse settings, the 'device' setting is greyed out. I don't see why the mouse should work perfectly when running from the live USB but not once installed to the machine...? Thanks for any help.

    Read the article

  • Ubuntu 14.04 Bluetooth Magic Mouse doesn't pair (No agent available)

    - by Rafael Xavier
    Mouse gets discovered. Although, it doesn't pair. /var/log/syslog: Apr 23 10:05:15 xavier bluetoothd[9873]: No agent available for request type 0 Apr 23 10:05:15 xavier bluetoothd[9873]: btd_event_request_pin: Operation not permitted Apr 23 10:05:15 xavier bluetoothd[9873]: Connection refused (111) It's worth saying that: Keyboard has paired and it's working just fine though; Mouse used to work just fine in Ubuntu 12.04, and 13, and it works when I reboot on Mac; This is the hci device. $ hcitool dev Devices: hci0 E0:F8:47:3A:3F:47 How to get it working?

    Read the article

  • How do I record audio through M-Audio Keystudio?

    - by interstar
    Hi, I'm trying to get my M-Audio Keystudio (which has an audio input as well as the keyboard) to record audio to Audacity. I'm in Ubuntu 10.10. When I look at the Sound Preferences I can select "M-Audio RunTime DFU Analog Stereo" as my input device. However, when I try to record in Audacity, Audacity remains frozen. The program seems to be running and recording, but the recording cursor won't advance. If I reset the audio input to the internal sound card, recording works normally. Any ideas what to look for?

    Read the article

  • set left handed mouse, then wacom stylus buttons switch too

    - by begtognen
    I'm using Lubuntu 12.04. I can set my mouse (basic usb mouse) to left hand (i.e. switch the left and right mouse buttons which is all I need) by going into Preferences / Keyboard and Mouse. However, it changes my Wacom stylus, so that when the tip touches the tablet it acts like the right mouse button, making it impossible to draw. Is there a way to have both happen at once? The stylus buttons working in right handed configuration, while the mouse works in left handed configuration? Thanks for any help/suggestions.

    Read the article

  • Remmina remote control: black screen after XBMC exit

    - by Tinellus
    I have a HTPC (Quietpc Sidewinder Fanless media pc) running Ubuntu 12.04 and autostarting XBMC Frodo. I'm remote controlling this machine using my laptop also running Ubuntu 12.04 and using Remmina VNC as a client. Everything works perfectly as long as XBMC is running: I can see the remote screen and control via mouse and keyboard on the laptop. However, when XBMC is stopped on the HTPC, my TV shows the Ubuntu desktop normally, but the screen on the laptop turns black. I'm however still controlling the HTPC since I can see the arrow moving upon laptop mouse movement, and I can still type text in the HTPC. Oddly, when the screensaver on the HTPC kicks in, I again have a visual on the laptop. Anyone any thoughts on this? What should I do to maintain visual after stopping XBMC? Any suggestions much appreciated. Thanks!

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >