Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 162/1617 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • "Zinc Whisker" issues?

    - by Dizzle
    Good morning; We've been having intermittent power supplies failures in our data center that have been preliminarily attributed to "zinc whiskers". I'm just starting to read about them (I just Googled the term and started picking stuff), and I'm interested in others experiences with them and any cleanup and recovery experiences. Thanks!

    Read the article

  • Getting more from an electricity monitor

    - by beakersoft
    Hi, I've recently got a free smart power electric energy monitor from my electric provider (npower, in the UK). While it is quite good i would like to pull the information from the monitor onto my home server, so i can get more detailed information and maybe graph it using mrtg or similar. Has anyone every tinkered about with them, how do the monitor and the display talk to each other (bluetooth/wifi) and any other info people might have. cheers Luke

    Read the article

  • what do the various USB charge while sleeping modes mean?

    - by MikeJ
    what do the various USB charge while sleeping modes mean? my new laptop has these sleep while charging modes : mode 4 mode 3 mode 2 mode 1 the list box doesn't tell me what these modes mean or do. I noticed that my iphone is charging really slowly on mode 4. What is it going to do to my power consumption if I change it to something like 1 or 2 ?

    Read the article

  • Windows 7 Aero Theme when on Battery

    - by Dan Revell
    Windows 7 has the full and basic aero themes that can be changed inside personalization. Windows used to automatically disable Windows Aero (transparency) when I unplug my laptop from the mains. I reset the theme and now it doesn't do this anymore. I can't seem to find how to enable this again. I've checked the advanced power options and control panel but turning back on this feature is eluding me. Any suggestions would be much appreciated.

    Read the article

  • Computer powers on automatically and beeps, but no display

    - by SomeOne
    I have a problem with my computer turning on automatically. The power switch lights up and the fan keeps running. After a while, a single beep will be heard every minute or so but nothing will display on the monitor. In some cases it will completely turn on and suddenly shut off. What is the problem and how can I fix it? This is a desktop computer running Windows XP.

    Read the article

  • Setting charging limit on MBP?

    - by Giannis
    Is it possible to tweak settings so that the battery will only charge up to 90% -95% and then use power adapter to run ? A friend told me he was able to set such limits on his non-mac PC so I was hoping there would be a way to do it. From reading I have done online it appears this is better than having a 100% battery most of the time. I have an MBP 13" 2012 running latest version of OSX ML(10.8.2).

    Read the article

  • How to start VirtualBox using commandline?

    - by Murat Arpat
    I've VirtualBox on a Windows 7 PC and created a virtual machine for Windows XP. Here is what I want to do: Run VirtualBox Power on guest OS (named "Windows XP") Open Winword in guest OS I want to accomplish these 3 steps at once (by using a batch file for example). Any help would be appreciated. In fact I've a batch file but it does not work as I wanted: "C:\Program Files\Oracle\VirtualBox\Vboxmanage.exe" startvm "Windows XP" TIMEOUT 30 "C:\Program Files\Oracle\VirtualBox\VBoxmanage.exe" guestcontrol "Windows XP" execute --image "C:\PROGRA~1\MICROS~2\OFFICE11\WINWORD.EXE" --username xpuser

    Read the article

  • Find time to charge in windows 7

    - by Midhat
    Is there a utility for windows 7 which will give me the time remaining until my laptop battery is fully charged. GNOME power manager has this functionality, So i was wondering if there is a counterpart for windows 7

    Read the article

  • Data Center Design and Preferences

    - by Warner
    When either selecting a data center as a co-location facility or designing a new one from scratch, what would your ideal specification be? Fundamentally, diversified power sources, multiple ISPs, redundant generators, UPS, cooling, and physical security are all desireable. What are the additional key requirements that someone might not consider on the first pass? What are the functional details someone might not consider during the initial high level design?

    Read the article

  • New harddrives failing within weeks.

    - by Jason Kealey
    I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

    Read the article

  • PC has a mind of it's own.

    - by ULTRA_POROV
    When I put my PC into standby, sometimes it randomly awakes, scaring me and waking me up. What could be causing this. No it is not my mouse moving, it can only be powered back on by the power button. It's really strange.

    Read the article

  • How to tell Windows 7 "sleep when laptop is closed, unless there's an external monitor connected; then use that"?

    - by Josh
    Most of the time, I would like my Windows 7 laptop to sleep when I close it. But sometimes, I like to connect an external monitor over DVI. I would like my laptop to use the external monitor when I close the lid, but only when a monitor is connected to the DVI port. Otherwise, sleep when closed. Is there any way I can do that, without manually changing the power settings every time I decide to use the monitor?

    Read the article

  • Prevent Windows 7 PC from sleeping while a download is in progress

    - by Jason Sundram
    While I'm downloading a large file on Windows 7 using Google Chrome, my computer goes to sleep. I could obviously set the computer to not sleep at all (or change the interval before the computer sleeps). What I want to know is: Is there a way to make Windows 7 not sleep as long as a download is in progress? (perhaps when any network activity is going on?). I've looked in the Advanced Power settings, and haven't seen any obvious setting.

    Read the article

  • xt_TCPMSS: bad length messages

    - by Matic
    I'm getting loads of messages like: Jun 23 10:24:20 awakening kernel: [ 1691.596823] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663362] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663495] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663588] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663671] xt_TCPMSS: bad length (1440 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.062914] xt_TCPMSS: bad length (474 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.305525] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:27 awakening kernel: [ 1698.946633] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:36 awakening kernel: [ 1707.481198] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:37 awakening kernel: [ 1708.723526] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:38 awakening kernel: [ 1709.599461] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.211052] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.260588] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.976058] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.225209] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.914961] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192696] xt_TCPMSS: bad length (1480 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192825] xt_TCPMSS: bad length (1480 bytes) In my dmesg/syslog. This linux machine is among other things used as an internet gateway. Connection is over PPPoE. I have the following line in my iptables script: $IPT -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu # PPPoE fix The frequency of this messages increased 10x when I upgraded from Debian lenny with 2.6.27 to squeeze with 2.6.32 few days ago. Why am I seeing this messages and how can I fix them?

    Read the article

  • Sonicwall routing between multiple subnets on multiple interfaces

    - by Rain
    As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

    Read the article

  • Cisco 837 not passing UDP traffic properly (was: DNS query problem)

    - by TessellatingHeckler
    We have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch - LAN. It has been fine for years, suddenly DNS resolution stopped working from the LAN to public DNS servers. No changes that I know of, so I can't revert anything. Current behaviour: DNS requests from the LAN using TCP show up in the oubound firewall log, in the Cisco debug log, in the dns-server-firewall, in tcpdump on the DNS server, the answer comes back, it works fine. DNS requests from the LAN using UDP show up in the outbound firewall log, in the Cisco debug log, but does NOT show in the dns-server-firewall, not in tcpdump on the DNS server, times out. DNS requests from the Cisco using UDP show up in the dns-server-firewall and in tcpdump on the DNS server, answer received, works fine. netcat connections to port 53 or a random port by TCP show up in the dns-server-firewall netcat connections to port 53 or a random port by UDP do not show up in the dns-server-firewall Summary: TCP seems fine throughought. UDP works from the Cisco over the ADSL, and it works from the LAN to the Cisco, but it doesn't seem to cross the Cisco 837 properly. Update: confirmed with netcat that any UDP traffic from the LAN is affected, not just traffic to port 53. Update: If I change the firewall's external IP to any other IP in the subnet, this starts working. When I put it back, it stops working. I now suspect it's an ISP issue (does that sound plausible?), and am removing the Cisco config.

    Read the article

  • Reloading NAT configuration on a running VMWare Server 2.0.2

    - by Jonathan Clarke
    I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

    Read the article

  • Has anyone used the sharedband connection bonding product?

    - by John Rennie
    See http://www.sharedband.com/ for details on the product. Obviously Sharedband aren't too keen on giving away their technical secrets, but I would guess that it bonds the connections at the IP layer i.e. their routers send the IP packets to the SharedBand routers over all available lines and the ShareBand routers handle all the virtual circuitry and provide the NATing to whatever IP address(es) they've assigned you. It looks a clever idea, and a good way to provide some resilience over ADSL links. You can even use ADSL links from different ISPs and SharedBand will still bond them for you. But, I find myself wondering how well it really works, and whether it's worth it. The Draytek routers can already load balance (though not bond) up to four ADSL lines, so the SharedBand product really only offers an advantage if you're hosting servers i.e. you can have one IP address to accept incoming connections through all your (working) ADSL lines. But should you really try and host servers using ADSL lines, especially since ADSL upload performance isn't stellar? Wouldn't it be better to use a hosted server, or maybe pay up for a leased line with a SLA? So I'm asking if anyone is using SharedBand, and if so what do you think of it? JR

    Read the article

  • Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

    - by JohnnyVegas
    I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

    Read the article

  • ADSL with RFC 2684 Bridging

    - by Axel Isouard
    My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the Internet, then I must use the RFC 2684 bridging mode. It works pretty fine on the ADSL modem's side, but I've spent one night trying to figure out how to connect to the Internet through this modem. I only have a Fonera 2.0n and a computer running Gentoo Linux. I've been trying to use the br2684ctl utility with brctl on my Gentoo, first I've configured my kernel in that way : CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_MPPE=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOATM=y CONFIG_PPPOE=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y [...] CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set And I still get these messages : cirus nais # br2684ctl -b -c 0 -e 0 -a 8.35 br2684ctl[8041]: Interface "nas0" created sucessfully br2684ctl[8041]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[8041]: Fatal: failed to connect on socket; No such device The brctl utility keeps telling me "Invalid argument" each time I try to add the nas0 interface into my bridge, I'm honestly hoping I'm doing wrong. I've been following this README carefully and this tutorial on setting up a PPPoE connection with Gentoo, but the PPPoE interface just tries to start, and nothing special related to PPP happens, I can't see the interface when I do ifconfig. So, I'm asking you if there's something huge I've been missing since the beginning ! Maybe I should wait to buy a new router fully supporting the RFC2684 bridging mode, but I'm more interested in setting up this mode on my Fonera 2.0n and even my Raspberry Pi !

    Read the article

  • Windows 7 - system error 5 problem

    - by Ian
    My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >