Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 158/1617 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

  • new PC not work with existing router, but works fine when directly connecting to cable modem

    - by user34786
    I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

    Read the article

  • Algorithm for finding the smallest power of two that's greater or equal to a given value

    - by Boyan
    I need to find the smallest power of two that's greater or equal to a given value. So far, I have this: int value = 3221; // 3221 is just an example, could be any number int result = 1; while (result < value) result <<= 1; It works fine, but feels kind of naive. Is there a better algorithm for that problem? EDIT. There were some nice Assembler suggestions, so I'm adding those tags to the question.

    Read the article

  • Determine Android phone's proximity to known point while conserving power

    - by ahsteele
    I am trying to determine if an Android user has had a close proximity to a list of predetermined locations. I'd like to do this with the least amount of drain on the phone's battery. The two mechanisms I see for accomplishing this are proximity alerts and requesting location updates. What are the pros and cons of the two methods? Will one have less affect on the battery than the other? In either case I would guess the specific location manager used would affect power usage (existing Stack Overflow answer).

    Read the article

  • Orbital equations, and power required to run them

    - by Adam Davis
    Due to a discussion on the SO IRC today, I'm curious about orbital mechanics, and The equations needed to solve orbital problems The computing power required to solve complex problems The question in particular is calculating when the Earth will plow into the Sun (or vice versa, depending on the frame of reference). I suspect that all the gravitational pulls within our solar system may need to be calculated, which makes me wonder what type of computer cluster is required, or can this be done on a single box? I don't have the experience to do a back of the napkin test here, but perhaps you do? Also, much thx to Gortok for the original inspiration (see comments).

    Read the article

  • Rounding a positive number to a power of another number

    - by Sagekilla
    I'm trying to round a number to the next smallest power of another number. The number I'm trying to round is always positive. I'm not particular on which direction it rounds, but I prefer downwards if possible. I would like to be able to round towards arbitrary bases, but the ones I'm most concerned with at the moment is base 2 and fractional powers of 2 like 2^(1/2), 2^(1/4), and so forth. Here's my current algorithm for base 2. The log2 I multiply by is actually the inverse of log2: double roundBaseTwo(double x) { return 1.0 / (1 << (int)((log(x) * log2)) } Any help would be appreciated!

    Read the article

  • How to find the largest power of 2 less than the given number

    - by nazar_art
    I need to find the largest power of 2 less than the given number. And I stuck and can't find any solution. Code: public class MathPow { public int largestPowerOf2 (int n) { int res = 2; while (res < n) { res =(int)Math.pow(res, 2); } return res; } } This doesn't work correctly. Testing output: Arguments Actual Expected ------------------------- 9 16 8 100 256 64 1000 65536 512 64 256 32 How to solve this issue?

    Read the article

  • why is port 500 in use and how can I free it? VPNC error

    - by kirill_igum
    i tried to use network manager to connect to my university's vpn; it didn't work. then i used a command line vpnc: > sudo vpnc [sudo] password for kirill: Enter IPSec gateway address: vpn.net.**.edu Enter IPSec ID for vpn.net.**.edu: ** Enter IPSec secret for **@vpn.net.**.edu: Enter username for vpn.net.**.edu: ** Enter password for **@vpn.net.**.edu: vpnc: Error binding to source port. Try '--local-port 0' Failed to bind to 0.0.0.0:500: Address already in use then i did this: sudo vpnc --local-port 0 with the same config and it all worked. i'd like to be able to use network manager gui to connect to vpn. I wanted to find out which program uses the port 500: > sudo netstat -a |grep 500 tcp 0 0 *:17500 *:* LISTEN udp 0 0 *:4500 *:* udp 0 0 *:17500 *:* unix 3 [ ] STREAM CONNECTED 63500 unix 3 [ ] STREAM CONNECTED 12500 @/tmp/.X11-unix/X0 there is nothing that uses 500 i'm using ubuntu 10.10 on thinkpad x201t

    Read the article

  • Testing radius server from Mac OS X client

    - by Calvin Froedge
    I have a radius server set up on a server running Ubuntu 11.04. I have configured my switch to use the authentication server's IP (192.168.1.2) for RADIUS / 802.1x authentication, and I created a connection to test connecting from my Mac OSX client. Here is my radius configuration for the client: client 192.168.1.0/16 { secret = testing123 } I can successfully authenticate using both 127.0.0.1 (localhost) and 192.168.1.2 (ip of eth1), so I know radius is getting those requests. I set up a connection to test from my macbook, and my requests are timing out. http://screencast.com/t/tMhRLS3H7 Is there a better way to test the radius connection from my macbook? Thanks! UPDATE: I was able to successfully test on Mac OSX client using RadPerf. This is available as a cross-platform command line tool.

    Read the article

  • xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context

    - by mmc18
    When I executed xl2tpd I amhaving following error. # xl2tpd -D xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context xl2tpd[845]: init: Unable to load config file When I remove the "line 13" I having same error with "Line 14" thefore I do not think that the problem is about "ipsec sared" Here is my configuration file xl2tpd.conf. LINUX Ubuntu 12.0.4 ;Openswan IPsec 2.6.37; xl2tpd version: xl2tpd-1.3.1 ; [global] ipsec sared=yes listen-addr=47.168.137.27 ; [lns default] ip range = 192.168.1.10-192.168.1.20 local ip = 192.168.1.1 require chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes name=LinuxIPSECVPN ANSWER:(since have not enough reputation I am writting it over here.) removing the ";" character at the beginning of [global] and [lns default] have solved the issue. At fist I tought that [global] and[lns default] were just a comment.

    Read the article

  • Add custom command line to extended context menu in Windows 7

    - by 280Z28
    I have an application pinned to the task bar. 90% of the time, I run it with no additional command line options, so I can either click it (if not already open), or right click the icon and click the application name to open a new instance. I want to make it where when I right click it, there are 2 options listed: the first is the program with no command line options and the second is the one with a custom command line (that I hard code). If this is impossible, it would be tolerable to add it to the extended context menu (shift + right click the icon), but I prefer the former.

    Read the article

  • Problems linking to social networks in Windows 8

    - by Andrew Cooper
    I've upgraded my laptop to Windows 8 (from Windows 7) and I'm having problems with getting information to show in the People and Messaging apps. I've linked my Facebook, Twitter and LinkedIn accounts to my Live Id, and on Windows 7 I was able to see my Friends' facebook activity in Windows Live Messenger. In the Windows 8 People app I can see all my contacts from Facebook, Twitter and LinkedIn, and I can see the on-line status of at least my Facebook contacts. I can also see the profiles details of each contact, but I don't get anything in the "What's New" view. The Messaging app is just blank. I assume I should be able to send messages to my contacts, but I can't see any way to do it. Am I missing something?

    Read the article

  • Dell Inspiron 1520 Intermittent connection to wireless router

    - by ChuckNevol
    I have two computers in my home which are connected to a wireless router and a wireless printer. One computer is a Del XPS and the other a Dell laptop Inspiron 1520. In recent weeks we noticed the Inspiron had difficulty maintaining connection to the wireless router - web pages would suddenly have to be reloaded, or the computer rebooted while the other computer, the XPS, had no problems on the same network. So we connected a hard wire line from the Inspiron to the Verizon supplied wireless router. Problems still exist. could it be a bad driver?

    Read the article

  • All downloads being interrupted

    - by Jake
    System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

    Read the article

  • Can't copy files with 'additional permissions' to ext4 drive -- files that have @ after permissions,

    - by 99miles
    I am copying files from Snow Leopard to a mounted ext4 share via Samba, that's on a Fedora machine. Some files cannot be copied, and give this error: The operation can’t be completed because you don’t have permission to access some of the items. I've noticed that the files that can't be copied have an @ at the end of their permissions whien I do 'ls -l' in the command line. For example, I can copy the second file but not the first: -rwxrwxrwx@ 1 miles staff 1448 May 14 22:55 test.txt -rw-r--r-- 1 miles staff 136 Apr 5 17:06 image.psd.zip From what I've found, the @ means the file has 'additional properties'. Does anyone know how I can resolve this issue so I can copy the files to the fileshare?? Thanks!

    Read the article

  • ESXi 4.1 CentOS 6.X eth0 unnavailable

    - by L.K.
    I don't usually ask for help so directly, usually google have all i need but this time i'm seriously lost. Hope you can help me .s The thing is, i have a server with Vmware ESXi 4.1 and 5 already running and configured virtual servers, but whenever i try to make a new one on CentOS 6.X it leaves me without eth0 to be activated in any way. When installing CentOS, in the screen of localhost.localdomain i try by the button in the left down corner of the screen to make eth0 connect automatically but it tells me a NetworkManager Error: cannot start eth0. So...in command line once the CentOS is already installed, i have configured ifcfg-eth0 and manually tried to take up the eth0 but when i restart network service "Bringing up eth0: Failed" and sometimes even "shutting down eth0: Failed" Thanks in advance

    Read the article

  • NIC models for HVM guests in Xen 4.0

    - by Jed Daniels
    Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

    Read the article

  • Robocopy to a drive connected to a wlan router fails

    - by Ville Koskinen
    I have a wireless router and an USB hard drive connected to it. Basic file access on the command line and Explorer works flawlessly after having set up some options on the router and mapping to some folders with net use k: \\ROUTER\Folder1 /user:MYLAPTOP\Me password /persistent:yes net use n: \\ROUTER\Folder2 /user:MYLAPTOP\Me password /persistent:yes Robocopy (and using SyncToy for that matter) to a network drive however fails: robocopy c:\Files k:\Backup /MIR /Z gives There is not enough space on the disk. 2010/01/05 09:52:11 ERROR 112 (0x00000070) Accessing Destination Directory N:\ Waiting 30 seconds... The error message is misleading: there is plenty of space on the disk and the folders I'm copying are small. The router is an ASUS WL-500gp with a standard firmware. I'd appreciate if someone would be able to explain what is causing the problem and, if possible, how to fix it.

    Read the article

  • How can I telnet to an IPv6 host using Mac OS X?

    - by Nate
    I’m testing IPv6 on a corporate network and having problems with OS X. With most IPv6 commands, such as telnet -6 or traceroute6, I get the error: connect: No route to host For example, I have a web server. This fails: $ telnet -6 fe80::… 80 # this fails I know the server is reachable because ping6 works (note that I have to use the -I argument): $ ping6 -I en1 fe80::… # this works And I know the web server is running because I can telnet to it from Windows: C:\> telnet fe80::… 80 # this works I suspect there is some configuration flag or command-line argument that I am missing.

    Read the article

  • Network traffic is not being forwarded from a VM to the network using a bridged interface with Xen + libvirt

    - by foob
    I'm having trouble getting network access from a VM that I'm running using Xen and libvirt. I've been trying different things and reading similar posts online for a couple of days but I'm really stuck at this point. If anybody could offer some insight it would be much appreciated. I have a VM that I'm running on a host with a bridge set up as br0 and an interface eth0 on a 192.168.60.0/24 subnet. The networking portion of the libvirt configuration xml is: <interface type='bridge'> <mac address='ff:a0:d1:e5:07:de'/> <source bridge='br0'/> <script path='/etc/xen/scripts/vif-bridge'/> <model type='virtio' /> </interface> When I start the VM a vif6.0 interface is created on the host and the ifconfig output is: br0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet addr:192.168.60.33 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3570 (3.4 KiB) TX bytes:3508 (3.4 KiB) eth0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:19 Memory:fe8f0000-fe900000 vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:6660 (6.5 KiB) TX bytes:468 (468.0 b) virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) The 'brctl show' output seems to show the bridge being configured correctly: br0 8000.00a0d1e507de no eth0 vif6.0 The ifcfg-eth0 contents in the VM are: DEVICE=eth0 BOOTPROTO=static HWADDR=FF:A0:D1:E5:07:DE IPADDR=192.168.60.133 NETMASK=255.255.255.0 ONBOOT=yes and the output of ifconfig in the VM look like what I would expect: eth0 Link encap:Ethernet HWaddr FF:A0:D1:E5:07:DE inet addr:192.168.60.133 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::fda0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:7780 (7.5 KiB) but when I try to ssh or ping another computer I get 'no route to host.' Using tcpdump on the host system I tried to see if I could narrow down where the problem is: # tcpdump -vv -i vif6.0 tcpdump: WARNING: vif6.0: no IPv4 address assigned tcpdump: listening on vif6.0, link-type EN10MB (Ethernet), capture size 96 bytes 14:49:40.833997 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:41.833314 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:42.833309 arp who-has 192.168.60.35 tell 192.168.60.133 So the VM is sending out out an arp who-has packet when I try to ssh to 192.168.60.35. I think that this means the setup within the VM is ok and that this is an issue on the host system. If I run tcpdump with the interface of br0 then I don't see these arp packets. My thought here is that the packets are being blocked before going on to the bridge somehow. I tried adding an iptables rule to resolve this: -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT but it didn't work. I also tried the following: /sbin/sysctl -w net.bridge.bridge-nf-call-ip6tables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-arptables=0 /sbin/sysctl -w net.ipv4.ip_forward=1 which had no impact. Is it obvious to somebody who has more experience than me what I'm missing here? Should vif6.0 have the same MAC address is eth0 in the vm? Do I need more rules in my iptables? Thanks for any help!

    Read the article

  • TP-LINK TD-W8151N Modem/router as just wi-fi router

    - by Reshma
    I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

    Read the article

  • Load website and fill form from the command line

    - by Martin Scharrer
    Using the Linux command line (Bash shell) I like to load a specific website in my browser (normally Firefox, but other one would be ok as well as long it runs under Linux) and fill a pre-defined form with some data. Actually, this should run from a Makefile. Most of the form data is static and will be stored as variables in the Makefile, just some fields are to be filled manually before manually sending the form. I know how to load the website in question from the command line using: firefox <URL> But there seems no possibility to fill the form automatically with variables given on the command line. Is there a plugin, executable or JavaScript which allows me to do this? Any suggestions and hints are welcome. I don't mind coding some JavaScript.

    Read the article

  • Juniper Networks SRX240 as a office router?

    - by Jordan Mendelson
    We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

    Read the article

  • I just ordered 70/10 internet service, and need a new router I think?

    - by data_jepp
    Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

    Read the article

  • tool for monitoring network traffic on Windows 7 Home

    - by Xah Lee
    for Windows 7 Home Edition: can anyone recommend a tool to monitor network traffic? either build-in or 3rd-party. I like to have a graph view (e.g. as in Task Manager) but also nice are tool that lets me see what IP/port that's incoming/outgoing. Command line is fine. Or even some tutorial. Thanks. (am old unix sys admin and web app dev. Though not much of a network admin and don't know much Windows. I need this tool just for my home PC, not in any pro capacity.)

    Read the article

  • Weird Network Behavior of Home Router

    - by Stilgar
    First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

    Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >