Search Results

Search found 7359 results on 295 pages for 'triple channel ram'.

Page 162/295 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Is SATA bandwith per Port or per Controller?

  - by instanceofTom

  I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

  Read the article

• Rest client throw timeout exception

  - by shandu

  Hi, I have create REST client in C# using example on this page: http://msdn.microsoft.com/en-us/library/aa395208(v=vs.90).aspx. Server is built in PHP. When I send request to some urls I have this exception: The request channel timed out while waiting for a reply after 00:00:59.9531250. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. But, sometimes, when I debug code, I get response. How to solve this?

  Read the article

• Rest client throw timeout exception

  - by shandu

  Hi, I have create REST client in C# using example on this page: http://msdn.microsoft.com/en-us/library/aa395208(v=vs.90).aspx. Server is built in PHP. When I send request to some urls I have this exception: The request channel timed out while waiting for a reply after 00:00:59.9531250. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. But, sometimes, when I debug code, I get response. How to solve this?

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• MacBook repeatedly disconnects from Wi-Fi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4 GHz). The Wi-Fi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the Linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without any issues. The problem also seemingly becomes more pronounced after midnight. What could the problem be? Edit: Here are the logs that Spiff requested: http://pastie.org/951761

  Read the article

• Why are email transfers between mail servers often not encrypted? Why aren't users warned about it?

  - by AmV

  Users can often choose if they want to access their email provider (such as Gmail) using a secure channel (e.g. using HTTPS). However, to the best of my knowledge, when it comes to mail-server-to-mail-server communications, most emails are still transferred in plain text and not encrypted, making it possible to anybody on the network to read their content. Are there any technologies that give the user some guarantees that his emails are sent securely from end to end ? Why not let the user know when encryption is not supported and let him choose if he wants his email to be still delivered ?

  Read the article

• Debian Wheezy, hostapd running but no AP detected by clients

  - by f0o

  I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

  Read the article

• How to troubleshoot problems sharing internet connection via WiFi on Mac OS X

  - by sprugman

  I'm at a hotel, plugged into their network via ethernet on my MacBook. I want to share the connection via wifi to two other computers. I went to Prefs Sharing and set up internet sharing. I know it's working because my friend with a Mac access the net fine. My friend with the PC can see the network, but can't connect to it. In the sharing prefs, airport options, I chose these options: Channel: Automatic Enable encryption: yes WEP Key length 40-bit password length: 5 chars (as specified in the instructional text) Update: I tried it with encryption turned off, and it works. Of course, I'd rather not do that... Any ideas?

  Read the article

• How do I get a 300Mbps connection over 802.11n?

  - by Daniel Schaffer

  I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

  Read the article

• Posting videos to a website... with a dynamically updating interface

  - by Johnny W

  I'm currently putting together a website for my Luddite friend. He needs a blog, photos and videos... all easily updateable by him. WordPress and Blogger both have brilliant functionality to allow you to host your own blog on your own domain, but what about photos and videos? Does YouTube or Google videos or Vimeo or MSN Video or anyone offer the ability to easily insert a video navigation interface onto your own site? (Something similar to YouTube's "Channel" pages, except on your own domain?) Same goes for photos. I'm pretty sure FlickR doesn't allow you to easily upload and manage photos for viewing on your own domain. Does anyone else? My friend doesn't want to be editing any HTML and I don't want to be creating a complicated system to handle tons of different videos. There must a user-friendly solution in this day and age? Thanks for any help!

  Read the article

• Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

  - by retailevolved

  I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

  Read the article

• free Raw-File Converter/Editor

  - by RCIX

  I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

  Read the article

• Why are PNG-8 files mangled when opened in Photoshop?

  - by Daniel Beardsley

  Why are some 32 bit PNGs opened in Photoshop with Indexed Colors and no transparency? For instance, I grabbed a png icon file of the Stack Overflow logo at: http://blog.stackoverflow.com/wp-content/uploads/icon-so.png When opening it in Photoshop CS3, it apparently treats it as indexed color and gets rid of the alpha channel. The image on the right is a screen grab of the icon. Changing the Image mode in Photoshop to RGB doesn't change the image at all. I've tried this with a few other PNGs and it seems hit or miss. When viewed in other programs, it displays fine. left:png opened in Photoshop, right:screen grab of png from browser What gives?, does Photoshop not interpret the PNG file format correctly?

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• What firewall ports do I need to open when using FTPS?

  - by anoopm

  I need to access an ftps server (vsftpd) on a vendor's site. The vendor has a firewall in front of the ftps server and I have a firewall in front of my ftps client. I understand that ports 990, 991 and maybe 989 need to be opened up for control traffic. When looking at it from the vendor's firewall perspective, should these ports be opened up for both inbound and outbound traffic? What about ports for the DATA channel? Do I have to open all ports above 1000? And should I do it for both inbound and outbound traffic? TIA for your help.

  Read the article

• My 2009 MacBook Logic board failed - options to proceed and how difficult?

  - by user181061

  Scannerz just gave my MacBook logic board a big fat F! I upgraded from Snow Leopard to Mountain Lion about 3 weeks ago. The system was running short of memory so I upgraded it. The system was running fine for about 2 weeks. Yesterday the thing started acting erratic. A lot of spinning beach balls, delays, and then some errors saying files couldn't be read to or from the drive. I figured the drive was going because the system is over 3 years old. I ran Scannerz on it and it indicated a lot of errors and irregularities. I rescanned it in cursory mode, and none of them were repeatable, just showing up all over the place in different regions of the scan. I went through the docs and they implied either an I/O cable was bad, a connection was damaged, or the logic board was bad. I tossed on my backup of Snow Leopard that I cloned from the original hard drive because I figured Mountain Lion was to blame and booted from the USB drive with the clone on it. It wasn't. I performed scans on every single port, and errors and irregularities that couldn't be repeated were showing up on every single one of them. I then, for kicks, put a CD into the CD player. Scannerz doesn't test optical drives but I figured surely that will work. No it won't. More spinning beach balls and messages telling me it can't be read. It was working fine 3 days ago. I know a lot of people don't like MacBook's, but mine's been great, at least until now. It was working great even with Mountain Lion after the upgrade. The system is a mid-2009 MacBook. In my opinion, it's a complete waste to toss this system. The display is too good, the keyboard works great, and it still looks good, plus this type of MacBook still uses the FireWire 400 port and I use that for Time Machine backups. I've tried reseating the RAM, it didn't do anything. I shut the system down and put in the old RAM, booted to Snow Leopard, and the problems persist. Here are my questions: The Scannerz documentation somewhere said something about the Airport card not being seated properly, but when I go to iFixit, it's apparent, at least I think it's apparent, that this isn't a slot type Airport card that the user can easily install or remove. If the cables or connections to the Airport card are bad, could they be causing this problem. How about any other connections that can be intermittent, failing or erratic? Any type of resets that I could possibly do to get rid of this? For any of those that have replaced a logic board on a MacBook, if this really is the culprit, are there any "gotcha's" I need to be aware of? As an FYI, I replaced the hard drive on an old iBook @500MHz that I had a long time ago, and I replaced the drive on a 1.33GHz PowerBook about 6 years ago. You have to be careful, but using some of the info on web sites like iFixit it's not that hard. Time consuming, but not that hard. The Intel based MacBook's to me look like they're easier to service than either of those. I'm thinking about getting a unit off of eBay that matches mine but has something else wrong with it, like a busted display. I REFUSE to buy a new system. A guy at my office has a 2007 Mac Pro and he can't upgrade to Mountain Lion because his system is "obsoleted." That's ridiculous. If you pay nearly $7,500 for a system it shouldn't be trash just because Apple decides they don't have enough money (sorry for the soap box, but it's true, IMO!) Any input is appreciated.

  Read the article

• MIDI - Continous control of pitch outside the standard pitch bend range?

  - by user1423893

  After I send a note on message I can control the pitch of a note within a ±2 semitone range using the pitch bend channel command. How can I continuously update a pitch of a note outside of the normal pitch bend range without retriggering the note (i.e. sending another note on message with the new pitch?) In other words the current note is still sounding after a note on message and its envelope has not reached the end of its release stage. I would like to change the pitch outside the pitch bend range, preferably anywhere within the audible frequency range.

  Read the article

• ideal memory configuration 4 bank, ddr3, AM3+ FX - 1 vs 2 vs 4 dimms?

  - by TardisGuy

  Ok, so ive been looking around, trying to learn and understand the way that ram works. Ive gotten one answer that said "The addressing is best for 2 sticks, and when you use 4; it slows down" Another answer said something like: Theres bank/channel interleave that makes the memory read like one stick Also I read something about the memory density also being a factor. I dug further and found out that theres a higher speed limit on my board for 2 sticks vs 4, so now im trying to put an image in my head of how and why, and... pfft. Can anyone explain, or recommend a resource that would answer these questions?

  Read the article

• Log highlighted lines to window in irssi

  - by Sebastian P.

  I usually keep an irssi session running on my server at all times. Often times it also takes me quite a while between remembering that I in fact have it running. Therefore I'd like to know if there's an easy way to log all lines that are highlighted to a custom window, such that I later, when I return, can see what people have said that was directed at me. Most useful would of course be if it logged both nickname, time and place (channel, network) of the message. I've been looking around, and haven't managed to get anything working which accomplishes this, so it would be splendid if such a thing existed.

  Read the article

• "Press Tab to search <site>" in Chrome not working

  - by YatharthROCK

  The problem After partially entering a URL like meta.st, Chrome adds in the rest of the URL slected in blue and says "Press Tab to search Meta Stack Overflow". But on pressing, it just moves the cursor to the next item like in a normal text-field. Other info I'm on Windows 7 Home Basic. My Chrome version number is 22.0.1229.52 beta-m (beta channel). This was working before. What I've tried I've reported it in Chrome (by going to Options Tools Report an issue...). I've also tried deleting all my custom search engines (they might've been interfering) and also tried creating a new profile. I also googled, but to no avail. How do I fix this? Thanks.

  Read the article

• Gaming blew fuse and causes funny smell: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

  Read the article

• Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

  - by Eli

  Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

  Read the article

• Make Google Chrome "Application" Windows Use High-Quality Icons in Windows 7

  - by The How-To Geek

  Whenever I use Google Chrome's "Create Application" shortcut (which I heavily use, and recommend), the icons shown on the Windows 7 taskbar are really blurry, probably the result of the 16x16 favicon being stretched out. I'd like to be able to replace these with another, high-quality icon, but even when I replace the cached file, it doesn't update for some reason. For reference, here's the path to the icon, for Gmail, at least. I'm also using the latest Dev channel version of Chrome. %USERPROFILE%\AppData\Local\Google\Chrome\USERDA~1\Default\PLUGIN~1\GOOGLE~1\mail.google.com\https_443\icons#desktop\

  Read the article

• MacBook repeatedly disconnects from WiFi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4GHz). The WiFi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without issue. The problem also seemingly becomes more pronounced after midnight. Any ideas as to what the problem could be?

  Read the article

• Extremely poor WiFi reception on new desktop

  - by guy

  I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >