Search Results

Search found 5024 results on 201 pages for 'sending'.

Page 163/201 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Playing wave file ends immediatly (C++, Windows)

  - by TyBoer

  I've got a following situation. On a machine there is a Fritz ISDN card. There is a process that is responsible for playing a certain wave file on this device's wave out (ISDN connection is made at startup and made persistent). The scenario is easy, whenever needed the process calls waveOutWrite() on the previously opened wave device (everything initialized without any problems of course) and a callback function waits for MMWOMDONE msg to know that the playback has been finished. Since a few days however (nothing changed neither in the process nor the machine) the MMWOMDONE message comes immediately after calling waveOutWrite() even though the wave lasts a couple of seconds. Again no error is reported, it looks like the file was played but had zero length (which is not the case). I am also sure that waveOutReset() was not called by my process (it would also trigger sending the mentioned message). I already used to have some strange problems in the past that where solved simply by reinstalling TAPI drivers. This time for some reason it is problematic form me to perform that once again and am trying more analytical approach :). Any suggestions what might cause such a behavior? Maybe sth on the other end of the ISDN line?

  Read the article

• Dependency between operations in scala actors

  - by paradigmatic

  I am trying to parallelise a code using scala actors. That is my first real code with actors, but I have some experience with Java Mulithreading and MPI in C. However I am completely lost. The workflow I want to realise is a circular pipeline and can be described as the following: Each worker actor has a reference to another one, thus forming a circle There is a coordinator actor which can trigger a computation by sending a StartWork() message When a worker receives a StartWork() message, it process some stuff locally and sends DoWork(...) message to its neighbour in the circle. The neighbours do some other stuff and sends in turn a DoWork(...) message to its own neighbour. This continues until the initial worker receives a DoWork() message. The coordinator can send a GetResult() message to the initial worker and wait for a reply. The point is that the coordinator should only receive a result when data is ready. How can a worker wait that the job returned to it before answering the GetResult() message ? To speed up computation, any worker can receive a StartWork() at any time. Here is my first try pseudo-implementation of the worker: class Worker( neighbor: Worker, numWorkers: Int ) { var ready = Foo() def act() { case StartWork() => { val someData = doStuff() neighbor ! DoWork( someData, numWorkers-1 ) } case DoWork( resultData, remaining ) => if( remaining == 0 ) { ready = resultData } else { val someOtherData = doOtherStuff( resultData ) neighbor ! DoWork( someOtherData, remaining-1 ) } case GetResult() => reply( ready ) } } On the coordinator side: worker ! StartWork() val result = worker !? GetResult() // should wait

  Read the article

• Flex HttpService POST limited to 543 Byte per Form field?

  - by motto

  Hi, I am getting a FaultEvent when trying to send form fields through HTTPService that contain more than 542 chars. Initializing the HttpService: httpServ = new HTTPService(); httpServ.method = 'POST'; httpServ.url = ENDPOINT_URL; //http://localhost:3001/ReportError.aspx httpServ.resultFormat = HTTPService.RESULT_FORMAT_TEXT; httpServ.contentType = HTTPService.CONTENT_TYPE_FORM; httpServ.addEventListener(ResultEvent.RESULT, OnErrorSent); httpServ.addEventListener(FaultEvent.FAULT, OnFault); Sending the request: var params:Object = {}; //params["stack"] = e.stackTrace.slice(0, 542); //length 542 = works //params["stack2"] = e.stackTrace.slice(1, 543); //length 542 = works (just to show that it's not about the content itself) params["stack3"] = e.stackTrace.slice(0, 543); //length 543 = fails I also seem to be able to create many form fields (with 542 length) so that it's not a limit of the request itself but of the form field: var params:Object = {}; params["stack"] = e.stackTrace.slice(0, 542); //length 542 params["stack2"] = e.stackTrace.slice(1, 543); //length 542 params["stack3"] = e.stackTrace.slice(2, 544); //length 542 // Length > 1600 chars The receiving party is an ASP.NET 4 site on the same domain and port. I hope someone already came across a similar restrictions or has some general advice on how to trace this problem down further. Thanks in advance.

  Read the article

• If attacker has original data and encrypted data, can they determine the passphrase?

  - by Brad Cupit

  If an attacker has several distinct items (for example: e-mail addresses) and knows the encrypted value of each item, can the attacker more easily determine the secret passphrase used to encrypt those items? Meaning, can they determine the passphrase without resorting to brute force? This question may sound strange, so let me provide a use-case: User signs up to a site with their e-mail address Server sends that e-mail address a confirmation URL (for example: https://my.app.com/confirmEmailAddress/bill%40yahoo.com) Attacker can guess the confirmation URL and therefore can sign up with someone else's e-mail address, and 'confirm' it without ever having to sign in to that person's e-mail account and see the confirmation URL. This is a problem. Instead of sending the e-mail address plain text in the URL, we'll send it encrypted by a secret passphrase. (I know the attacker could still intercept the e-mail sent by the server, since e-mail are plain text, but bear with me here.) If an attacker then signs up with multiple free e-mail accounts and sees multiple URLs, each with the corresponding encrypted e-mail address, could the attacker more easily determine the passphrase used for encryption? Alternative Solution I could instead send a random number or one-way hash of their e-mail address (plus random salt). This eliminates storing the secret passphrase, but it means I need to store that random number/hash in the database. The original approach above does not require storage in the database. I'm leaning towards the the one-way-hash-stored-in-the-db, but I still would like to know the answer: does having multiple unencrypted e-mail addresses and their encrypted counterparts make it easier to determine the passphrase used?

  Read the article

• How can I get at the raw bytes of the request in WCF?

  - by Gregory Higley

  For logging purposes, I want to get at the raw request sent to my RESTful web service implemented in WCF. I have already implemented IDispatchMessageInspector. In my implementation of AfterReceiveRequest, I want to spit out the raw bytes of the message even (and especially) if the content of the message is invalid. This is for debugging purposes. My service works perfectly already, but it is often helpful when working through problems with clients who are trying to call the service to know what it was they sent, i.e., the raw bytes. For example, let's say that instead of sending a well-formed XML document, they post the string "your mama" to my service endpoint. I want to see that that's what they did. Unfortunately using MessageBuffer::CreateBufferedCopy() won't work unless the contents of the message are already well-formed XML. Here's (roughly) what I already have in my implementation of AfterReceiveRequest: // The immediately following line raises an exception if the message // does not contain valid XML. This is uncool because I want // the raw bytes regardless of whether they are valid or not. using (MessageBuffer buffer = request.CreateBufferedCopy(Int32.MaxValue)) { using (MemoryStream stream = new MemoryStream()) using (StreamReader reader = new StreamReader(stream)) { buffer.WriteMessage(stream); stream.Position = 0; Trace.TraceInformation(reader.ReadToEnd()); } request = buffer.CreateMessage(); } My guess here is that I need to get at the raw request before it becomes a Message. This will most likely have to be done at a lower level in the WCF stack than an IDispatchMessageInspector. Anyone know how to do this?

  Read the article

• Debugging unexpected error message - possible memory management problem?

  - by Ben Packard

  I am trying to debug an application that is throwing up strange (to my untutored eyed) errors. When I try to simply log the count of an array... NSLog(@"Array has %i items", [[self startingPlayers] count]); ...I sometimes get an error: -[NSCFString count]: unrecognized selector sent to instance 0x1002af600 or other times -[NSConcreteNotification count]: unrecognized selector sent to instance 0x1002af600 I am not sending 'count' to any NSString or NSNotification, and this line of code works fine normally. A Theory... Although the error varies, the crash happens at predictable times, immediately after I have run through some other code where I'm thinking I might have a memory management issue. Is it possible that the object reference is still pointing to something that is meant to be destroyed? Sorry if my terms are off, but perhaps it's expecting the array at the address it calls 'count' on, but finds another previous object that shouldn't still be there (eg an NSString)? Would this cause the problem? If so, what is the most efficient way to debug and find out what is that address? Most of my debugging up until now involves inserting NSLogs, so this would be a good opportunity to learn how to use the debugger.

  Read the article

• Java - encrypt / decrypt user name and password from a configuration file

  - by nzpcmad

  We are busy developing a Java web service for a client. There are two possible choices: Store the encrypted user name / password on the web service client. Read from a config. file on the client side, decrypt and send. Store the encrypted user name / password on the web server. Read from a config. file on the web server, decrypt and use in the web service. The user name / password is used by the web service to access a third-party application. The client already has classes that provide this functionality but this approach involves sending the user name / password in the clear (albeit within the intranet). They would prefer storing the info. within the web service but don't really want to pay for something they already have. (Security is not a big consideration because it's only within their intranet). So we need something quick and easy in Java. Any recommendations? The server is Tomkat 5.5. The web service is Axis2. What encrypt / decrypt package should we use? What about a key store? What configuration mechanism should we use? Will this be easy to deploy?

  Read the article

• How do I exclude data from local table schema_migrations from being pushed to Heroku DB?

  - by Thierry Lam

  I was able to push my Ruby on Rails app with MySQL(local dev) to the Heroku server along with migrating my model with the command heroku rake db:migrate. I have also read the documentation on Database Import/Export. Is that doc referring to pushing actual data from my local dev DB to whichever Heroku's DB? Do I need to modify anything in the file database.yml to make it happen? I ran the following command: heroku db:push and I am getting the error: Sending data 2 tables, 3 records !!! Caught Server Exception | ETA: --:--:-- Taps Server Error: PGError ERROR: duplicate key value violates unique constraint "unique_schema_migrations" I have 2 tables, one I create for my app and the other schema_migrations. The total number of entries among the 2 tables is 3. I'm also printing the number of entries I have in the table I have created and it's showing 0. Any ideas what I might be missing or what I am doing wrong? EDIT: I figured out the above, Heroku's DB already have schema_migrations the moment I ran migrate. New question: Does anyone know how I can exclude data from a specific table from being pushed to Heroku DB. The table to exclude in this case will be schema_migrations. Not so good solution: I googled around and someone else was having the same issue. He suggested naming the schema_migrations table to zschema_migrations. In this way data from the other tables will be pushed properly until it fails on the last table. It's a pretty bad solution but will do for the time being. A better solution will be to use an existing Rails command which can reset a specific table from a database. I don't think Rake can do that.

  Read the article

• How do I reset a form in an ajax callback?

  - by B.Gordon

  I am sending a form using simple ajax and returning the results in a div above the form. The problem is that after the form is submitted and validated, I display a thank you and want to reset the form so they don't just press the submit button again... Can't seem to find the right code to do this... <form id="myForm" target="sendemail.php" method="post"> <div id="results"></div> <input type="text" name="value1"> <input type="text" name="value2"> <input type="submit" name="submit"> </form> So, my sendemail.php validation errors and success messages appear in #results without problems. But... when I try to send back a javascript form reset command, it does not work. Naturally I cannot see it in the source code since it is an AJAX callback so I don't know if that is the issue or if I am just using the wrong syntax. echo "<p>Thank you. Your message has been accepted for delivery.</p>"; echo "<script type=\"text/javascript\">setTimeout('document.getElementById('myForm').reset();',1000);</script>"; Any ideas gurus?

  Read the article

• Communication between EJB3 Instances (JEE inter-bean communication) possible?

  - by Hank

  I'm designing a part of a JEE6 application, consisting of EJB3 beans. Part of the requirements are multiple parallel (say a few hundred) long running (over days) database hunts. Individual hunts have different search parameters (start time, end time, query filter). Parameters may get changed over time. Currently I'm thinking of the following: SearchController (Stateless Session Bean) formulates a set of search parameters, sends it off to a SearchListener via JMS SearchListener (Message Driven Bean) receives search parameters, instantiates a SearchWorker with the parameters SearchWorker (SLSB) hunts repeatedly through the database; when it finds something, the result is sent off via JMS, and the search continues; when the given 'end-time' has reached, it ends What I'm wondering now: Is there a problem, with EJB3 instances running for days? (Other than that I need to be able to deal with container restarts...) How do I know how many and which EJB instances of SearchWorker are currently running? Is it possible to communicate with them individually (similar to sending a System V signal to a unix process), e.g. to send new parameters, to end an instance, etc..

  Read the article

• Restful WCF Service - how to send data with illegal XML characters?

  - by Chris

  I have a RESTful WCF web service. One of my methods has several input parameters. One of the input parameters is a string. Some times the data I am passing to this web method will include content that has one or more "illegal characters" - i.e. "&". So, I replace this with &amp; before passing it to the web service - but it still throws an exception. The exception isn't visible, as the data never reaches the web service, but I know that it is this content that is causing the problem, as I have done several tests sending data that doesn't contain an illegal XML character, and every time it worked, but any data containing "&" will fail. Am I not supposed to replace "&" with &amp;? Please refer to the web method below: [WebGet] public MapNode AddMapNode(string nodeText) { return new inProcessEntities().AddMapNode(nodeText); } Please help on how I can fix this. Thanks. Chris

  Read the article

• Messaging pattern question

  - by Al Bundy

  Process A is calculating values for objects a1, a2, a3 etc. and is sending results to the middleware queue (RabbitMQ). Consumers read the queue and process these results further. Periodically process A has to send a snapshot of these values, so consumers could do some other calculations. Values for these objects might change independently. The queue might look like this a1, a1, a2, a1, a2, a2, a3... Consumers process each item in the queue. The snapshot has to contain all objects and consumers will process this message for all objects in one go. So the requirement is to have a queue like this: a1, a1, a3, a2, a2, [snapshot, a1, a2, a3], a3, a1 ... The problem is that these items are of different types: one type for objects like a1, a2 and other for a snapshot. This means that they should be processed in a diferent queues, but in that case there is a race condition: consumers might process objects before processing a snapshot. Is there any pattern to solve this (quite common) problem? We are using RabbitMQ for message queueing.

  Read the article

• How can I print a web page on a server?

  - by Gavin Schultz

  Suppose I develop a web page using the cool Google visualization API, and it does everything the user wants. They can the parameters, look at the graphs, and print the page to get a reasonable-looking report. All good. Now suppose I want to do the same thing server-side. For example, say we need a set of report generated at a specific time of day, printed to a PDF and emailed to a manager. It's not a user-initiated action, so we don't have a user's browser or their printer. We have a URL that would render the report if we had a browser, and that's it. Is there a good way to do this server-side? Is this just foolish? Has anyone done anything like that before? Do any of the major browsers have APIs that might provide such functionality? Keep in mind too that it's not just static HTML; probably javascript will be running first to shift the DOM around. I know we could implement a whole different reporting engine on the server side to do this, but that will (a) generate reports that look a bit different, and (b) require me to build/maintain two sets of functionality. Instead, I'd be happy if I could just render the page / pages I want in an invisible server-side browser and print it to a PDF (let's mostly ignore that step - I know any number of PDF printer drivers that could do this). I don't really want to do it ugly either - i.e. by starting a browser process and then sending keystrokes directly to the window either - that's just bound to fall apart with a slight nudge. The only related question I found had an answer like that. Any advice appreciated!

  Read the article

• PHP not obeying my defined ETags

  - by Sam Bisbee

  What I'm doing I'm pulling an image from the database and sending it to the browser with all the proper headers - the image displays fine. I also send an ETag header, using the SHA1 of the image's content as the tag. The images are getting called semi regularly, so caching is a bit of an issue (won't kill the site, but nice to have). The Problem $_SERVER['HTTP_IF_NONE_MATCH'] is not available to me. As far as I can tell, this is because of PHP's "disobey the cache controls" life style. I can't mess with the session cache limiter, because I don't have access. But, even if I did have access, I wouldn't want to touch it: 99% of the site is under WordPress. The Environment PHP 4 (don't ask) Apache 2.2 WordPress The images live in the database (largeblog), which I can't change. Any guidance, tip/tricks, etc. would be helpful. I don't have much room to change the environmental/structural stuff. Cheers.

  Read the article

• Database design for a media server containing movies, music, tv and everything in between?

  - by user364114

  In the near future I am attempting to design a media server as a personal project. MY first consideration to get the project underway is architecture, it will certainly be web based but more specifically than that I am looking for suggestions on the database design. So far I am considering something like the following, where I am using [] to represent a table, the first text is the table name to give an idea of purpose and the items within {} would be fields of the table. Also not, fid is functional id referencing some other table. [Item {id, value/name, description, link, type}] - this could be any entity, single song or whole music album, game, movie - almost see this as a recursive relation, ie. a song is an item but an album that song is part of is also an item or for example a tv season is an item, with multiple items being tv episodes [Type {id, fid, mime type, etc}] - file type specific information - could identify how code handles streaming/sending this item to a user [Location {id, fid, path to file?}] [Users {id, username, email, password, ...? }] - user account information [UAC {id, fid, acess level}] - i almost feel its more flexible to seperate access control permissions form the user accounts themselves [ItemLog {id, fid, fid2, timestamp}] - fid for user id, and fid2 for item id - this way we know what user access what when [UserLog {id, fid, timestamp}] -both are logs for access, whether login or last item access [Quota {id, fid, cap}] - some sort of way to throttle users from queing up the entire site and letting it download ... Suggestions or comments are welcome as the hope is that this project will be a open source project once some code is laid out.

  Read the article

• Table cell in a split-view controller - selected cell becomes deselected when called by reloadData

  - by bpapa

  I'm working on a universal app that uses a SplitViewController to present a master-detail view. In the iPad HIG on Split Views, Apple states: In general, indicate the current selection in the left pane in a persistent way. This behavior helps people understand the relationship between the item in the left pane and the contents of the right pane. This is important because the contents of the right pane can change, but they should always remain related to the item selected in the left pane. So I'm trying to maintain selection state on the left. Easy enough when the user taps, I just remove the deselectRowAtIndexPath:animated: message from tableView:didSelectRowAtIndexPath: implementation. But, I also want the selection state to show up by default (without a user tap). I wound up putting this in my tableView:cellForRowAtIndexPath: implementation: if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { if (cellShouldBeSelected) cell.selected = YES; else cell.selected = NO; } The behavior I'm seeing, is that when the cells finall appear, for a fraction of a section the cell is indeed selected, but then the selection disappears without any user interaction. Any ideas? I set the new clearsSelectionOnViewWillAppear property to NO, but that doesn't seem to fix it, and it shouldn't really matter because I'm marking the cell as selected long after viewWillAppear is called - I'm actually doing it after some network activity and then sending the table view a reloadData message.

  Read the article

• Can't get data with spaces into the database from Ajax POST request

  - by J Jones

  I have a real simple form with a textbox and a button, and my goal is to have an asynchronous request (jQuery: $.ajax) send the text to the server (PHP/mysql a la Joomla) so that it can be added to a database table. Here's the javascript that is sending the data from the client: var value= $('#myvalue').val(); $.ajax( { type: "POST", url: "/administrator/index.php", data: { option: "com_mycomponent", task: "enterValue", thevalue: value, format: "raw"}, dataType: "text", success: reportSavedValue } ); The problem arises when the user enters text with a space in it. The $_POST variable that I receive has all the spaces stripped out, so that if the user enters "This string has spaces", the server gets the value "Thisstringhasspaces". I have been googling around, and have found lots of references that I need to use encodeURIComponent. So I have tried it, but now the value that I get from $_POST is "This20string20has20spaces". So it appears to be encoding it the way I would expect, only to have the percent signs stripped instead of the spaces, and leaving the hex numbers. I'm really confused. It seems that this sort of question is asked and answered everywhere on the web, and everywhere encodeURIComponent is hailed as the silver bullet. But apparently I'm fighting a different breed of lycanthrope. Does anyone have any suggestions?

  Read the article

• BackgroundWorker might be causing my application to hang

  - by alexD

  I have a Form that uses a BackgroundWorker to execute a series of tests. I use the ProgressChanged event to send messages to the main thread, which then does all of the updates on the UI. I've combed through my code to make sure I'm not doing anything to the UI in the background worker. There are no while loops in my code and the BackgroundWorker has a finite execution time (measured in seconds or minutes). However, for some reason when I lock my computer, often times the application will be hung when I log back in. The thing is, the BackgroundWorker isn't even running when this happens. The reason I believe it is related to the BackgroundWorker though is because the form only hangs when the BackgroundWorker has been executed since the application was loaded (it only runs when given a certain user input). I pass this thread a List of TreeNodes from a TreeView in my UI through the RunWorkerAsync method, but I only read those nodes in the worker thread..any modifications I make to them is done in the UI thread through the progressChanged event. I do use Thread.Sleep in my worker thread to execute tests at timed intervals (which involves sending messages over a TCP socket, which was not created in the worker thread). I am completely perplexed as to why my application might be hanging. I'm sure I'm doing something 'illegal' somewhere, I just don't know what.

  Read the article

• How would I structure the loop to go through inputs?

  - by dmanexe

  I am attempting to make a loop that will go through an array structured like this: $input[n][checked] $input[n][input] The 2nd input acts as a price multiplier, but doesn't have to exist (field can be blank). I don't think a foreach loop is right because I don't think it handles the inputs from the form in the correct dimensional array order to keep the information together. I have inputs on a form that look like this: <input type="checkbox" name="measure[<?php echo $item->id; ?>][checked]" value="<?php echo $item->id; ?>"> <input class="item_mult" type="text" name="measure[<?php echo $item->id; ?>][input]" /> I am attempting to make the loop go through and act as a multiplier on the input relative to its sibling field. (i.e. input[1][input] would be an integer that I want to retrieve later, grouped with input[1][checked]) <? $field = $this->input->post('measure',true); $totals = array(); foreach($field as $value): if ($value['input'] == TRUE) { $query = $this->db->get_where('items', array('id' => $value['input']))->row(); $totals[] = $query->price; ?> <p><?=$query->name?> - <?=money_format('%(#10n', $query->price)?></p> <?php } else { } endforeach; ?> And finally, the last code to array_sum and print the grand total: <? $grand_total = array_sum($totals); ?> <p><?=money_format('%(#10n', $grand_total)?></p> Eventually, I will need to store these records in a database, so I am sending complete item IDs through, etc.

  Read the article

• How much should the AppDelegate do?

  - by Rudiger

  I'm designing quite a large App and on startup it will create sessions with a few different servers. As they are creating a session which is used across all parts of the app its something I thought would be best in App Delegate. But the problem is I need the session progress to be represented on the screen. I plan to have a UIToolBar at the bottom of the main menu which I don't want to cover with the progress bar but cover the UIView above it.So the way I see it I could do it a few different ways. 1) Have the App Delegate establish the sessions and report the progress to the main menu class so it can represent it in the progress bar (will I have any issues doing this if the sessions are created in a separate thread?), 2) have the App delegate display the main menu (UIView with a bunch of buttons and UIToolBar) and have it track and display the progress (I have never displayed anything in the App Delegate but assume you can do this but its not recommended) or 3) have the App Delegate just push the main menu and have the mainMenu class create the sessions and display the progress bar. 4) I think the other way to do it is to create the sessions in a delegate class and have the delegate set to mainMenu rather than self (AppDelegate), although I've never used anything other then self so not sure if this will work or if I will be able to close the thread (through calling super maybe?) as its running in the AppDelegate rather than the delegate of the class. As I've kinda said before the sessions are being created in a class in a separate thread so it wont lock the UI and I think the best way is the first but am I going to have issues having it running in a separate thread, reporting back to the app delegate and then sending that message to the mainMenu view? I hope that all makes sense, let me know if you need any further clarification. Any information is appreciated Cheers,

  Read the article

• Netty options for real-time distribution of small messages to a large number of clients?

  - by user439407

  I am designing a (near) real-time Netty server to distribute a large number of very small messages to a large number of clients across the internet. In internal, go as fast as you can testing, I found that I could do 10k clients no sweat, but now that we are trying to go across the internet, where the latency, bandwidth etc varies pretty wildly we are running into the dreaded outOfMemory issues, even with 2 gigs of RAM. I have tried various workarounds(setting the socket stack sizes smaller, setting high and low water marks, cancelling things that are too old), and they help a little, but they seem to only help a little bit. What would some good ways to optimize Netty for sending large #s of small messages without significant delays? Also, the bulk of the message only consists of one kind of message that I don't particularly care if it doesn't arrive. I would use UDP but because we don't control the client, thats not really a possibility. Is it possible to set a separate timeout solely for this kind of message without affecting the other messages? Any insight you could offer would be greatly appreciated.

  Read the article

• Method for launching audio player on Android from web page for streaming media

  - by Brad

  To link to SHOUTcast/HTTP internet radio streams, traditionally you would link to a playlist file, such as an M3U or PLS. From there, the browser would launch the audio player registered to handle the playlist. This works great on any PC, Palm, Blackberry, and iPhone. This method does not work in Android without installing extra software. Sure, Just Playlists or StreamFurious can handle it just fine, but I am assuming there has to be a way to invoke the audio or video player commonly installed by default on Android installations. By default, no audio player is capable of handling M3U or PLS. The player seems to open it, but says "Unsupported Media Type". To make this more annoying, the browser is capable of streaming MP3 audio over HTTP, simply by opening a link to an MP3 file. I have tried simply linking directly to the MP3 stream hosted by SHOUTcast, which should end up in the same result, but SHOUTcast detects "Mozilla" in the user-agent string, and instead of sending the stream, it sends the information page for the station. How should I link to a SHOUTcast stream on Android, from a normal mobile site, without using extra applications?

  Read the article

• Passing a list of ints to WebMethod using jQuery and ajax.

  - by birdus

  I'm working on a web page (ASP.NET 4.0) and am just starting simple to try and get this ajax call working (I'm an ajax/jQuery neophyte) and I'm getting an error on the call. Here's the js: var TestParams = new Object; TestParams.Items = new Object; TestParams.Items[0] = 1; TestParams.Items[1] = 5; TestParams.Items[2] = 10; var finalObj = JSON.stringify(TestParams); var _url = 'AdvancedSearch.aspx/TestMethod'; $(document).ready(function () { $.ajax({ type: "POST", url: _url, data: finalObj, contentType: "application/json; charset=utf-8", dataType: "json", success: function (msg) { $(".main").html(msg.d); }, error: function (xhr, ajaxOptions, thrownError) { alert(thrownError.toString()); } }); Here's the method in my code behind file: [Serializable] public class TestParams { public List<int> Items { get; set; } } public partial class Search : Page { [WebMethod] public static string TestMethod(TestParams testParams) { // I never hit a breakpoint in here // do some stuff // return some stuff return ""; } } Here's the stringified json I'm sending back: {"Items":{"0":1,"1":5,"2":10}} When I run it, I get this error: Microsoft JScript runtime error: 'undefined' is null or not an object It breaks on the error function. I've also tried this variation on building the json (based on a sample on a website) with this final json: var TestParams = new Object; TestParams.Positions = new Object; TestParams.Positions[0] = 1; TestParams.Positions[1] = 5; TestParams.Positions[2] = 10; var DTO = new Object; DTO.positions = TestParams; var finalObj = JSON.stringify(DTO) {"positions":{"Positions":{"0":1,"1":5,"2":10}}} Same error message. It doesn't seem like it should be hard to send a list of ints from a web page to my webmethod. Any ideas? Thanks, Jay

  Read the article

• Programmatically disable WiredHeadset

  - by tyrone-tudehope

  Hi, I have an HTC Hero with a major issue. It thinks that the headset/headphones are plugged in. I sent it to HTC and they said there is water damage so no fix. I have tried toggleheadset, toggleheadset2. I've rooted my device and installed the Android 2.1 ROM. Now I found out that AudioManager.setRouting and .setWiredHeadsetOn(bool) have been deprecated and subsequently removed. I read a post somewhere about how you can create a wrapper for the AudioSystem class as the setRouting is still available there. I as of yet have not been able to figure out how to go about doing this as the AudioSystem class is hidden in the SDK and the code makes use of native functions. Does anybody know of a way to go about creating and implementing a wrapper for AudioSystem or of another way to disable the headset? P.S. I've cleaned out the headset port so there is no dust or anything sending false signals to the mainboard. Any help will be greatly appreciated. Thanks, Tyrone

  Read the article

• Rails: link_to_remote prototype helper with :with option

  - by Syed Aslam

  I am trying to grab the current value of a drop down list with Prototype and passing it along using :with like this <%= link_to_remote "today", :update => "choices", :url => { :action => "check_availability" } , :with => "'practitioner='+$F('practitioner')&'clinic='+$F('clinic')&'when=today'", :loading => "spinner.show(); $('submit').disable();", :complete => "spinner.hide(); $('submit').enable();" %> However, this is not working as expected. I am unable to access parameters in the controller as the link_to_remote helper is sending parameters like this: Parameters: {"succ"=>"function () {\n return this + 1;\n}", "action"=>"check_availability", "round"=>"function () {\n return __method.apply(null, [this].concat($A(arguments)));\n}", "ceil"=>"function () {\n return __method.apply(null, [this].concat($A(arguments)));\n}", "floor"=>"function () {\n return __method.apply(null, [this].concat($A(arguments)));\n}", "times"=>"function (iterator, context) {\n $R(0, this, true).each(iterator, context);\n return this;\n}", "toPaddedString"=>"function (length, radix) {\n var string = this.toString(radix || 10);\n return \"0\".times(length - string.length) + string;\n}", "toColorPart"=>"function () {\n return this.toPaddedString(2, 16);\n}", "abs"=>"function () {\n return __method.apply(null, [this].concat($A(arguments)));\n}", "controller"=>"main"} Where am I going wrong? Is there a better way to do this?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >