Search Results

Search found 4689 results on 188 pages for 'weak references'.

Page 163/188 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

  - by Synetech inc.

  Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

  Read the article

• What is the current state of Ubuntu's transition from init scripts to Upstart? [migrated]

  - by Adam Eberlin

  What is the current state of Ubuntu's transition from init.d scripts to upstart? I was curious, so I compared the contents of /etc/init.d/ to /etc/init/ on one of our development machines, which is running Ubuntu 12.04 LTS Server. # /etc/init.d/ # /etc/init/ acpid acpid.conf apache2 --------------------------- apparmor --------------------------- apport apport.conf atd atd.conf bind9 --------------------------- bootlogd --------------------------- cgroup-lite cgroup-lite.conf --------------------------- console.conf console-setup console-setup.conf --------------------------- container-detect.conf --------------------------- control-alt-delete.conf cron cron.conf dbus dbus.conf dmesg dmesg.conf dns-clean --------------------------- friendly-recovery --------------------------- --------------------------- failsafe.conf --------------------------- flush-early-job-log.conf --------------------------- friendly-recovery.conf grub-common --------------------------- halt --------------------------- hostname hostname.conf hwclock hwclock.conf hwclock-save hwclock-save.conf irqbalance irqbalance.conf killprocs --------------------------- lxc lxc.conf lxc-net lxc-net.conf module-init-tools module-init-tools.conf --------------------------- mountall.conf --------------------------- mountall-net.conf --------------------------- mountall-reboot.conf --------------------------- mountall-shell.conf --------------------------- mounted-debugfs.conf --------------------------- mounted-dev.conf --------------------------- mounted-proc.conf --------------------------- mounted-run.conf --------------------------- mounted-tmp.conf --------------------------- mounted-var.conf networking networking.conf network-interface network-interface.conf network-interface-container network-interface-container.conf network-interface-security network-interface-security.conf newrelic-sysmond --------------------------- ondemand --------------------------- plymouth plymouth.conf plymouth-log plymouth-log.conf plymouth-splash plymouth-splash.conf plymouth-stop plymouth-stop.conf plymouth-upstart-bridge plymouth-upstart-bridge.conf postgresql --------------------------- pppd-dns --------------------------- procps procps.conf rc rc.conf rc.local --------------------------- rcS rcS.conf --------------------------- rc-sysinit.conf reboot --------------------------- resolvconf resolvconf.conf rsync --------------------------- rsyslog rsyslog.conf screen-cleanup screen-cleanup.conf sendsigs --------------------------- setvtrgb setvtrgb.conf --------------------------- shutdown.conf single --------------------------- skeleton --------------------------- ssh ssh.conf stop-bootlogd --------------------------- stop-bootlogd-single --------------------------- sudo --------------------------- --------------------------- tty1.conf --------------------------- tty2.conf --------------------------- tty3.conf --------------------------- tty4.conf --------------------------- tty5.conf --------------------------- tty6.conf udev udev.conf udev-fallback-graphics udev-fallback-graphics.conf udev-finish udev-finish.conf udevmonitor udevmonitor.conf udevtrigger udevtrigger.conf ufw ufw.conf umountfs --------------------------- umountnfs.sh --------------------------- umountroot --------------------------- --------------------------- upstart-socket-bridge.conf --------------------------- upstart-udev-bridge.conf urandom --------------------------- --------------------------- ureadahead.conf --------------------------- ureadahead-other.conf --------------------------- wait-for-state.conf whoopsie whoopsie.conf To be honest, I'm not entirely sure if I'm interpreting the division of responsibilities properly, as I didn't expect to see any overlap (of what framework handles which services). So I was quite surprised to learn that there was a significant amount of overlap in service references, in addition to being unable to discern which of the two was intended to be the primary service framework. Why does there seem to be a fair amount of redundancy in individual service handling between init.d and upstart? Is something else at play here that I'm missing? What is preventing upstart from completely taking over for init.d? Is there some functionality that certain daemons require which upstart does not yet have, which are preventing some services from converting? Or is it something else entirely?

  Read the article

• How do large blobs affect SQL delete performance, and how can I mitigate the impact?

  - by Max Pollack

  I'm currently experiencing a strange issue that my understanding of SQL Server doesn't quite mesh with. We use SQL as our file storage for our internal storage service, and our database has about half a million rows in it. Most of the files (86%) are 1mb or under, but even on fresh copies of our database where we simply populate the table with data for the purposes of a test, it appears that rows with large amounts of data stored in a BLOB frequently cause timeouts when our SQL Server is under load. My understanding of how SQL Server deletes rows is that it's a garbage collection process, i.e. the row is marked as a ghost and the row is later deleted by the ghost cleanup process after the changes are copied to the transaction log. This suggests to me that regardless of the size of the data in the blob, row deletion should be close to instantaneous. However when deleting these rows we are definitely experiencing large numbers of timeouts and astoundingly low performance. In our test data set, its files over 30mb that cause this issue. This is an edge case, we don't frequently encounter these, and even though we're looking into SQL filestream as a solution to some of our problems, we're trying to narrow down where these issues are originating from. We ARE performing our deletes inside of a transaction. We're also performing updates to metadata such as file size stats, but these exist in a separate table away from the file data itself. Hierarchy data is stored in the table that contains the file information. Really, in the end it's not so much what we're doing around the deletes that matters, we just can't find any references to low delete performance on rows that contain a large amount of data in a BLOB. We are trying to determine if this is even an avenue worth exploring, or if it has to be one of our processes around the delete that's causing the issue. Are there any situations in which this could occur? Is it common for a database server to come to the point of complete timeouts when many of these deletes are occurring simultaneously? Is there a way to combat this issue if it exists? (cross-posted from StackOverflow )

  Read the article

• Unable to load type error in ASP.NET 4 application on Windows Server 2003 / IIS6 -- only happens after first worker process recycle

  - by Daniel Coffman

  I'm running an ASP.NET 4.0 web application on IIS6 (Windows Server 2003 x64). This app is one of many running on this server under the Default Web Site -- but is alone on it's own application pool because the other sites are all running ASP.NET 2.0 still. When I deploy my application, it works just fine until the application pool recycles or kills its worker process (by default 2 hours or 20 minutes with no activity). After this, I get the error: "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information." Refreshing the page, recycling the application pool, and iisreset do nothing. But, I can bring the site back online again for a little while by simply redeploying it. The stack trace seems to start at an EntityDataSource -- see below: [ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.] System.Reflection.RuntimeModule.GetTypes(RuntimeModule module) +0 System.Reflection.Assembly.GetTypes() +144 System.Data.Metadata.Edm.ObjectItemConventionAssemblyLoader.LoadTypesFromAssembly() +45 System.Data.Metadata.Edm.ObjectItemAssemblyLoader.Load() +34 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, ObjectItemLoadingSessionData loadingData) +130 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, KnownAssembliesSet knownAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage, Object& loaderCookie, Dictionary`2& typesInLoading, List`1& errors) +248 System.Data.Metadata.Edm.ObjectItemCollection.LoadAssemblyFromCache(ObjectItemCollection objectItemCollection, Assembly assembly, Boolean loadReferencedAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +580 System.Data.Metadata.Edm.ObjectItemCollection.ExplicitLoadFromAssembly(Assembly assembly, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +193 System.Data.Metadata.Edm.MetadataWorkspace.ExplicitLoadFromAssembly(Assembly assembly, ObjectItemCollection collection, Action`1 logLoadMessage) +140 System.Web.UI.WebControls.EntityDataSourceView.ConstructContext() +756 System.Web.UI.WebControls.EntityDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +147 This is a bug filed for the same (or similar) problem: http://connect.microsoft.com/VisualStudio/feedback/details/541962/unable-to-load-one-or-more-of-the-requested-types-connected-with-entitydatasource Question: Has anyone seen this and have advice? I've tried copy-local on all the references... Works just fine on my dev machine. Works on the server until the application pool worker process recycles. I'm building in release mode, but experience the same result when I build for debug. I'm stumped.

  Read the article

• Moving from VPS to Cloud

  - by GRIGORE-TURBODISEL

  ...and I have a few questions. I'm basically working on a MySQL+PHP based webapp. Since I don't have on-demand scaling with VPS, I'm planning to move from VPS to Cloud when I hit the 1000 subscribers barrier. I'm looking at Windows Azure but I'm ok with other suggestions. So here are my questions: Will it really cost me a kidney? Every subscriber needs to download around 4-5MB of static resources each day. Bandwidth is free on the VPS but here I see costs can easily get to $800.00/mo; this makes me very insecure about the whole thing, I mean VPS is just $2,000/yr. Do I need another VM or is PHP included in the Web Sites? I have basic sysadmin skills, I think I can handle setting up a PHP install, but will I have to do this? If yes, what other service do I need to setup manually? What about Memcached, MySQL, etc? What security protections does it include? For example I have some basic protection included, like directory traversals and executable files upload; I also have CloudFlare on my other websites for DDoS protection; will I need to do the same thing here too, can it even be installed, can I edit my DNS records, etc? How are e-mails, subdomains, add-on domains, parked domains, etc. handled? I haven't seen any references to e-mail boxes. On the VPS I simply add them from cPanel ([email protected] / whatever.mysite.com / ...); do I have a similar management interface here? Do I get SSH access? Or at least FTP, remote MySQL access and maybe some incremental back-ups or something? Can I see my quotas and advanced traffic info? I must mention that I really like the idea of the whole "cloud" concept, the added reliability and everything but I really need maybe a parallel to regular hosting or something so I know what to expect.

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• nginx rewrite for /blah/(.*) /$1

  - by skrewler

  I'm migrating from mod_php to nginx. I got everything working except for this rewrite.. I'm just not familiar enough with nginx configuration to know the correct way to do this. I came up with this by looking at a sample on the nginx site. server { server_name test01.www.myhost.com; root /home/vhosts/my_home/blah; access_log /var/log/nginx/blah.access.log; error_log /var/log/nginx/blah.error.log; index index.php; location / { try_files $uri $uri/ @rewrites; } location @rewrites { rewrite ^ /index.php last; rewrite ^/ht/userGreeting.php /js/iFrame/index.php last; rewrite ^/ht/(.*)$ /$1 last; rewrite ^/userGreeting.php$ /js/iFrame/index.php last; rewrite ^/a$ /adminLogin.php last; rewrite ^/boom\/(.*)$ /boom/index.php?q=$1 last; rewrite ^favicon.ico$ favico_ry.ico last; } # This block will catch static file requests, such as images, css, js # The ?: prefix is a 'non-capturing' mark, meaning we do not require # the pattern to be captured into $1 which should help improve performance location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } include php.conf; } The issue I'm having is with this rewrite: rewrite ^ht\/(.*)$ /$1 last; 99% of requests that will hit this rewrite are static files. So I think maybe it's getting sent to the static files section and that's where things are being messed up? I tried adding this but it didn't work: location ~* ^ht\/.*\.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } Any help would be appreciated. I know the best thing to do would be to just change the references of /ht/whatever.jpg to /whatever.jpg in the code.. but that's not an option for now.

  Read the article

• FTP script needs blank line

  - by Ones and Zeroes

  I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

  Read the article

• TFS 2010 SDK: Connecting to TFS 2010 Programmatically&ndash;Part 1

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,TFS 2010 SDK,TFS API,TFS Programming,TFS ALM   Download Working Demo Great! You have reached that point where you would like to extend TFS 2010. The first step is to connect to TFS programmatically. 1. Download TFS 2010 SDK => http://visualstudiogallery.msdn.microsoft.com/25622469-19d8-4959-8e5c-4025d1c9183d?SRC=VSIDE 2. Alternatively you can also download this from the visual studio extension manager 3. Create a new Windows Forms Application project and add reference to TFS Common and client dlls Note - If Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.Common do not appear on the .NET tab of the References dialog box, use the Browse tab to add the assemblies. You can find them at %ProgramFiles%\Microsoft Visual Studio 10.0\Common7\IDE\ReferenceAssemblies\v2.0. using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common;   4. There are several ways to connect to TFS, the two classes of interest are, Option 1 – Class – TfsTeamProjectCollectionClass namespace Microsoft.TeamFoundation.Client { public class TfsTeamProjectCollection : TfsConnection { public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection); public TfsTeamProjectCollection(Uri uri); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials); public TfsTeamProjectCollection(Uri uri, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public TfsConfigurationServer ConfigurationServer { get; internal set; } public override string Name { get; } public static Uri GetFullyQualifiedUriForName(string name); protected override object GetServiceInstance(Type serviceType, object serviceInstance); protected override object InitializeTeamFoundationObject(string fullName, object instance); } } Option 2 – Class – TfsConfigurationServer namespace Microsoft.TeamFoundation.Client { public class TfsConfigurationServer : TfsConnection { public TfsConfigurationServer(RegisteredConfigurationServer application); public TfsConfigurationServer(Uri uri); public TfsConfigurationServer(RegisteredConfigurationServer application, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials); public TfsConfigurationServer(Uri uri, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public override string Name { get; } protected override object GetServiceInstance(Type serviceType, object serviceInstance); public TfsTeamProjectCollection GetTeamProjectCollection(Guid collectionId); protected override object InitializeTeamFoundationObject(string fullName, object instance); } }   Note – The TeamFoundationServer class is obsolete. Use the TfsTeamProjectCollection or TfsConfigurationServer classes to talk to a 2010 Team Foundation Server. In order to talk to a 2005 or 2008 Team Foundation Server use the TfsTeamProjectCollection class. 5. Sample code for programmatically connecting to TFS 2010 using the TFS 2010 API How do i know what the URI of my TFS server is, Note – You need to be have Team Project Collection view details permission in order to connect, expect to receive an authorization failure message if you do not have sufficient permissions. Case 1: Connect by Uri string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); Case 2: Connect by Uri, prompt for credentials string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), new UICredentialsProvider()); configurationServer.EnsureAuthenticated(); Case 3: Connect by Uri, custom credentials In order to use this method of connectivity you need to implement the interface ICredentailsProvider public class ConnectByImplementingCredentialsProvider : ICredentialsProvider { public ICredentials GetCredentials(Uri uri, ICredentials iCredentials) { return new NetworkCredential("UserName", "Password", "Domain"); } public void NotifyCredentialsAuthenticated(Uri uri) { throw new ApplicationException("Unable to authenticate"); } } And now consume the implementation of the interface, string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; ConnectByImplementingCredentialsProvider connect = new ConnectByImplementingCredentialsProvider(); ICredentials iCred = new NetworkCredential("UserName", "Password", "Domain"); connect.GetCredentials(new Uri(_myUri), iCred); TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), connect); configurationServer.EnsureAuthenticated();   6. Programmatically query TFS 2010 using the TFS SDK for all Team Project Collections and retrieve all Team Projects and output the display name and description of each team project. CatalogNode catalogNode = configurationServer.CatalogNode; ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( new Guid[] { CatalogResourceTypes.ProjectCollection }, false, CatalogQueryOptions.None); // tpc = Team Project Collection foreach (CatalogNode tpcNode in tpcNodes) { Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' var tpNodes = tpcNode.QueryChildren( new Guid[] { CatalogResourceTypes.TeamProject }, false, CatalogQueryOptions.None); foreach (var p in tpNodes) { Debug.Write(Environment.NewLine + " Team Project : " + p.Resource.DisplayName + " - " + p.Resource.Description + Environment.NewLine); } }   Output   You can download a working demo that uses TFS SDK 2010 to programmatically connect to TFS 2010. Screen Shots of the attached demo application, Share this post :

  Read the article

• SQL SERVER – Enumerations in Relational Database – Best Practice

  - by pinaldave

  Marko Parkkola This article has been submitted by Marko Parkkola, Data systems designer at Saarionen Oy, Finland. Marko is excellent developer and always thinking at next level. You can read his earlier comment which created very interesting discussion here: SQL SERVER- IF EXISTS(Select null from table) vs IF EXISTS(Select 1 from table). I must express my special thanks to Marko for sending this best practice for Enumerations in Relational Database. He has really wrote excellent piece here and welcome comments here. Enumerations in Relational Database This is a subject which is very basic thing in relational databases but often not very well understood and sometimes badly implemented. There are of course many ways to do this but I concentrate only two cases, one which is “the right way” and one which is definitely wrong way. The concept Let’s say we have table Person in our database. Person has properties/fields like Firstname, Lastname, Birthday and so on. Then there’s a field that tells person’s marital status and let’s name it the same way; MaritalStatus. Now MaritalStatus is an enumeration. In C# I would definitely make it an enumeration with values likes Single, InRelationship, Married, Divorced. Now here comes the problem, SQL doesn’t have enumerations. The wrong way This is, in my opinion, absolutely the wrong way to do this. It has one upside though; you’ll see the enumeration’s description instantly when you do simple SELECT query and you don’t have to deal with mysterious values. There’s plenty of downsides too and one would be database fragmentation. Consider this (I’ve left all indexes and constraints out of the query on purpose). CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] NVARCHAR(10) ) You have nvarchar(20) field in the table that tells the marital status. Obvious problem with this is that what if you create a new value which doesn’t fit into 20 characters? You’ll have to come and alter the table. There are other problems also but I’ll leave those for the reader to think about. The correct way Here’s how I’ve done this in many projects. This model still has one problem but it can be alleviated in the application layer or with CHECK constraints if you like. First I will create a namespace table which tells the name of the enumeration. I will add one row to it too. I’ll write all the indexes and constraints here too. CREATE TABLE [CodeNamespace] ( [Id] INT IDENTITY(1, 1), [Name] NVARCHAR(100) NOT NULL, CONSTRAINT [PK_CodeNamespace] PRIMARY KEY ([Id]), CONSTRAINT [IXQ_CodeNamespace_Name] UNIQUE NONCLUSTERED ([Name]) ) GO INSERT INTO [CodeNamespace] SELECT 'MaritalStatus' GO Then I create a table that holds the actual values and which reference to namespace table in order to group the values under different namespaces. I’ll add couple of rows here too. CREATE TABLE [CodeValue] ( [CodeNamespaceId] INT NOT NULL, [Value] INT NOT NULL, [Description] NVARCHAR(100) NOT NULL, [OrderBy] INT, CONSTRAINT [PK_CodeValue] PRIMARY KEY CLUSTERED ([CodeNamespaceId], [Value]), CONSTRAINT [FK_CodeValue_CodeNamespace] FOREIGN KEY ([CodeNamespaceId]) REFERENCES [CodeNamespace] ([Id]) ) GO -- 1 is the 'MaritalStatus' namespace INSERT INTO [CodeValue] SELECT 1, 1, 'Single', 1 INSERT INTO [CodeValue] SELECT 1, 2, 'In relationship', 2 INSERT INTO [CodeValue] SELECT 1, 3, 'Married', 3 INSERT INTO [CodeValue] SELECT 1, 4, 'Divorced', 4 GO Now there’s four columns in CodeValue table. CodeNamespaceId tells under which namespace values belongs to. Value tells the enumeration value which is used in Person table (I’ll show how this is done below). Description tells what the value means. You can use this, for example, column in UI’s combo box. OrderBy tells if the values needs to be ordered in some way when displayed in the UI. And here’s the Person table again now with correct columns. I’ll add one row here to show how enumerations are to be used. CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] INT ) GO INSERT INTO [Person] SELECT 'Marko', 'Parkkola', '1977-03-04', 3 GO Now I said earlier that there is one problem with this. MaritalStatus column doesn’t have any database enforced relationship to the CodeValue table so you can enter any value you like into this field. I’ve solved this problem in the application layer by selecting all the values from the CodeValue table and put them into a combobox / dropdownlist (with Value field as value and Description as text) so the end user can’t enter any illegal values; and of course I’ll check the entered value in data access layer also. I said in the “The wrong way” section that there is one benefit to it. In fact, you can have the same benefit here by using a simple view, which I schema bound so you can even index it if you like. CREATE VIEW [dbo].[Person_v] WITH SCHEMABINDING AS SELECT p.[Firstname], p.[Lastname], p.[BirthDay], c.[Description] MaritalStatus FROM [dbo].[Person] p JOIN [dbo].[CodeValue] c ON p.[MaritalStatus] = c.[Value] JOIN [dbo].[CodeNamespace] n ON n.[Id] = c.[CodeNamespaceId] AND n.[Name] = 'MaritalStatus' GO -- Select from View SELECT * FROM [dbo].[Person_v] GO This is excellent write up byMarko Parkkola. Do you have this kind of design setup at your organization? Let us know your opinion. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Database, DBA, Readers Contribution, Software Development, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Install the Ajax Control Toolkit from NuGet

  - by Stephen Walther

  The Ajax Control Toolkit is now available from NuGet. This makes it super easy to add the latest version of the Ajax Control Toolkit to any Web Forms application. If you haven’t used NuGet yet, then you are missing out on a great tool which you can use with Visual Studio to add new features to an application. You can use NuGet with both ASP.NET MVC and ASP.NET Web Forms applications. NuGet is compatible with both Websites and Web Applications and it works with both C# and VB.NET applications. For example, I habitually use NuGet to add the latest version of ELMAH, Entity Framework, jQuery, jQuery UI, and jQuery Templates to applications that I create. To download NuGet, visit the NuGet website at: http://NuGet.org Imagine, for example, that you want to take advantage of the Ajax Control Toolkit RoundedCorners extender to create cross-browser compatible rounded corners in a Web Forms application. Follow these steps. Right click on your project in the Solution Explorer window and select the option Add Library Package Reference. In the Add Library Package Reference dialog, select the Online tab and enter AjaxControlToolkit in the search box: Click the Install button and the latest version of the Ajax Control Toolkit will be installed. Installing the Ajax Control Toolkit makes several modifications to your application. First, a reference to the Ajax Control Toolkit is added to your application. In a Web Application Project, you can see the new reference in the References folder: Installing the Ajax Control Toolkit NuGet package also updates your Web.config file. The tag prefix ajaxToolkit is registered so that you can easily use Ajax Control Toolkit controls within any page without adding a @Register directive to the page. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" /> </controls> </pages> </system.web> </configuration> You should do a rebuild of your application by selecting the Visual Studio menu option Build, Rebuild Solution so that Visual Studio picks up on the new controls (You won’t get Intellisense for the Ajax Control Toolkit controls until you do a build). After you add the Ajax Control Toolkit to your application, you can start using any of the 40 Ajax Control Toolkit controls in your application (see http://www.asp.net/ajax/ajaxcontroltoolkit/samples/ for a reference for the controls). <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="WebApplication1.WebForm1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>Rounded Corners</title> <style type="text/css"> #pnl1 { background-color: gray; width: 200px; color:White; font: 14pt Verdana; } #pnl1_contents { padding: 10px; } </style> </head> <body> <form id="form1" runat="server"> <div> <asp:Panel ID="pnl1" runat="server"> <div id="pnl1_contents"> I have rounded corners! </div> </asp:Panel> <ajaxToolkit:ToolkitScriptManager ID="sm1" runat="server" /> <ajaxToolkit:RoundedCornersExtender TargetControlID="pnl1" runat="server" /> </div> </form> </body> </html> The page contains the following three controls: Panel – The Panel control named pnl1 contains the content which appears with rounded corners. ToolkitScriptManager – Every page which uses the Ajax Control Toolkit must contain a single ToolkitScriptManager. The ToolkitScriptManager loads all of the JavaScript files used by the Ajax Control Toolkit. RoundedCornersExtender – This Ajax Control Toolkit extender targets the Panel control. It makes the Panel control appear with rounded corners. You can control the “roundiness” of the corners by modifying the Radius property. Notice that you get Intellisense when typing the Ajax Control Toolkit tags. As soon as you type <ajaxToolkit, all of the available Ajax Control Toolkit controls appear: When you open the page in a browser, then the contents of the Panel appears with rounded corners. The advantage of using the RoundedCorners extender is that it is cross-browser compatible. It works great with Internet Explorer, Opera, Firefox, Chrome, and Safari even though different browsers implement rounded corners in different ways. The RoundedCorners extender even works with an ancient browser such as Internet Explorer 6. Getting the Latest Version of the Ajax Control Toolkit The Ajax Control Toolkit continues to evolve at a rapid pace. We are hard at work at fixing bugs and adding new features to the project. We plan to have a new release of the Ajax Control Toolkit each month. The easiest way to get the latest version of the Ajax Control Toolkit is to use NuGet. You can open the NuGet Add Library Package Reference dialog at any time to update the Ajax Control Toolkit to the latest version.

  Read the article

• Enabling Http caching and compression in IIS 7 for asp.net websites

  - by anil.kasalanati

  Caching – There are 2 ways to set Http caching 1-      Use Max age property 2-      Expires header. Doing the changes via IIS Console – 1.       Select the website for which you want to enable caching and then select Http Responses in the features tab       2.       Select the Expires webcontent and on changing the After setting you can generate the max age property for the cache control    3.       Following is the screenshot of the headers   Then you can use some tool like fiddler and see 302 response coming from the server. Doing it web.config way – We can add static content section in the system.webserver section <system.webServer>   <staticContent>             <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="365.00:00:00" />   </staticContent> Compression - By default static compression is enabled on IIS 7.0 but the only thing which falls under that category is CSS but this is not enough for most of the websites using lots of javascript.  If you just thought by enabling dynamic compression would fix this then you are wrong so please follow following steps –   In some machines the dynamic compression is not enabled and following are the steps to enable it – Open server manager Roles > Web Server (IIS) Role Services (scroll down) > Add Role Services Add desired role (Web Server > Performance > Dynamic Content Compression) Next, Install, Wait…Done!   ?  Roles > Web Server (IIS) ?  Role Services (scroll down) > Add Role Services     Add desired role (Web Server > Performance > Dynamic Content Compression)     Next, Install, Wait…Done!     Enable  - ?  Open server manager ?  Roles > Web Server (IIS) > Internet Information Services (IIS) Manager   Next pane: Sites > Default Web Site > Your Web Site Main pane: IIS > Compression         Then comes the custom configuration for encrypting javascript resources. The problem is that the compression in IIS 7 completely works on the mime types and by default there is a mismatch in the mime types Go to following location C:\Windows\System32\inetsrv\config Open applicationHost.config The mimemap is as follows  <mimeMap fileExtension=".js" mimeType="application/javascript" />   So the section in the staticTypes should be changed          <add mimeType="application/javascript" enabled="true" />     Doing the web.config way –   We can add following section in the system.webserver section <system.webServer> <urlCompression doDynamicCompression="false"  doStaticCompression="true"/> More Information/References – ·         http://weblogs.asp.net/owscott/archive/2009/02/22/iis-7-compression-good-bad-how-much.aspx ·         http://www.west-wind.com/weblog/posts/98538.aspx  

  Read the article

• How to customise search core results web part Part1

  - by ybbest

  In this post, I’d like to show you how to customise search core results web part. It is a quite simple, most of the times what you need to do is to change the xslt to perform the changes. Here are the steps: 1. You need to change the xslt to the following, so that you can see the raw xml. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes" /> <xsl:template match="/"> <xmp><xsl:copy-of select="*"/></xmp> </xsl:template> </xsl:stylesheet> a. To do so , you need to go to edit page>>Edit search core results web part >>Display Properties and then untick use Location Visualization b. Open the xslt editor and copy the existing XSLT code to your preferred xslt editor so that you can customise it. c. Now you can paste in the XSLT code above. 2.Perform the search after you have completed step1 and you will see the search results returned in raw xml <All_Results> <Result> <id>1</id> <workid>678</workid> <rank>100000000</rank> <title>Ybbest</title> <author></author> <size>137531</size> <url>http://ybbest</url> <urlEncoded>http%3A%2F%2Fybbest</urlEncoded> <description>Ybbest test site</description> <write>3/17/2012</write> <sitename>http://ybbest</sitename> <collapsingstatus>0</collapsingstatus> <hithighlightedsummary> <c0>Ybbest</c0> test site <ddd /> Add a new image, change this welcome text or add new lists to this page by clicking the edit button above. You can click on Shared Documents to add files or on the <ddd /> </hithighlightedsummary> <hithighlightedproperties> <HHTitle> <c0>Ybbest</c0> </HHTitle> <HHUrl>http://<c0>ybbest</c0></HHUrl> </hithighlightedproperties> <contentclass>STS_Site</contentclass> <isdocument>False</isdocument> <picturethumbnailurl></picturethumbnailurl> <popularsocialtags /> <picturewidth>0</picturewidth> <pictureheight>0</pictureheight> <datepicturetaken></datepicturetaken> <serverredirectedurl></serverredirectedurl> <fileextension></fileextension> <ows_metadatafacetinfo></ows_metadatafacetinfo> <imageurl imageurldescription="SharePoint Site Collection">/_layouts/images/siteicon_16x16.png</imageurl> </Result> <TotalResults>69</TotalResults> <NumberOfResults>50</NumberOfResults> </All_Results> 3. Then you can read what has been returned in the raw xml and start modifying the xslt to customise your search results page. 4.You can also link an external xslt to the web part.It can be set in the Miscellaneous of Web Part section. You can also set it pragmatically using a feature receiver , you can download the source code to do so here. References: http://stackoverflow.com/questions/6548104/change-xslt-of-the-searchresultwebpart-during-the-featureactivated http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2010/04/05/a-quick-guide-to-coreresultswebpart-configuration-changes-in-sharepoint-2010.aspx http://www.tonytestasworld.com/post/2011/01/30/HowTo-display-SharePoint-Search-results-as-raw-XML.aspx

  Read the article

• C# 4.0: Named And Optional Arguments

  - by Paulo Morgado

  As part of the co-evolution effort of C# and Visual Basic, C# 4.0 introduces Named and Optional Arguments. First of all, let’s clarify what are arguments and parameters: Method definition parameters are the input variables of the method. Method call arguments are the values provided to the method parameters. In fact, the C# Language Specification states the following on §7.5: The argument list (§7.5.1) of a function member invocation provides actual values or variable references for the parameters of the function member. Given the above definitions, we can state that: Parameters have always been named and still are. Parameters have never been optional and still aren’t. Named Arguments Until now, the way the C# compiler matched method call definition arguments with method parameters was by position. The first argument provides the value for the first parameter, the second argument provides the value for the second parameter, and so on and so on, regardless of the name of the parameters. If a parameter was missing a corresponding argument to provide its value, the compiler would emit a compilation error. For this call: Greeting("Mr.", "Morgado", 42); this method: public void Greeting(string title, string name, int age) will receive as parameters: title: “Mr.” name: “Morgado” age: 42 What this new feature allows is to use the names of the parameters to identify the corresponding arguments in the form: name:value Not all arguments in the argument list must be named. However, all named arguments must be at the end of the argument list. The matching between arguments (and the evaluation of its value) and parameters will be done first by name for the named arguments and than by position for the unnamed arguments. This means that, for this method definition: public static void Method(int first, int second, int third) this call declaration: int i = 0; Method(i, third: i++, second: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = i++; int CS$0$0001 = ++i; Method(i, CS$0$0001, CS$0$0000); which will give the method the following parameter values: first: 2 second: 2 third: 0 Notice the variable names. Although invalid being invalid C# identifiers, they are valid .NET identifiers and thus avoiding collision between user written and compiler generated code. Besides allowing to re-order of the argument list, this feature is very useful for auto-documenting the code, for example, when the argument list is very long or not clear, from the call site, what the arguments are. Optional Arguments Parameters can now have default values: public static void Method(int first, int second = 2, int third = 3) Parameters with default values must be the last in the parameter list and its value is used as the value of the parameter if the corresponding argument is missing from the method call declaration. For this call declaration: int i = 0; Method(i, third: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = ++i; Method(i, 2, CS$0$0000); which will give the method the following parameter values: first: 1 second: 2 third: 1 Because, when method parameters have default values, arguments can be omitted from the call declaration, this might seem like method overloading or a good replacement for it, but it isn’t. Although methods like this: public static StreamReader OpenTextFile( string path, Encoding encoding = null, bool detectEncoding = true, int bufferSize = 1024) allow to have its calls written like this: OpenTextFile("foo.txt", Encoding.UTF8); OpenTextFile("foo.txt", Encoding.UTF8, bufferSize: 4096); OpenTextFile( bufferSize: 4096, path: "foo.txt", detectEncoding: false); The complier handles default values like constant fields taking the value and useing it instead of a reference to the value. So, like with constant fields, methods with parameters with default values are exposed publicly (and remember that internal members might be publicly accessible – InternalsVisibleToAttribute). If such methods are publicly accessible and used by another assembly, those values will be hard coded in the calling code and, if the called assembly has its default values changed, they won’t be assumed by already compiled code. At the first glance, I though that using optional arguments for “bad” written code was great, but the ability to write code like that was just pure evil. But than I realized that, since I use private constant fields, it’s OK to use default parameter values on privately accessed methods.

  Read the article

• Getting selected row in inputListOfValues returnPopupListener

  - by Frank Nimphius

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Model driven list-of-values in Oracle ADF are configured on the ADF Business component attribute which should be updated with the user value selection. The value lookup can be configured to be displayed as a select list, combo box, input list of values or combo box with list of values. Displaying the list in an af:inputListOfValues component shows the attribute value in an input text field and with an icon attached to it for the user to launch the list-of-values dialog. The list-of-values dialog allows users to use a search form to filter the lookup data list and to select an entry, which return value then is added as the value of the af:inputListOfValues component. Note: The model driven LOV can be configured in ADF Business Components to update multiple attributes with the user selection, though the most common use case is to update the value of a single attribute. A question on OTN was how to access the row of the selected return value on the ADF Faces front end. For this, you need to know that there is a Model property defined on the af:inputListOfValues that references the ListOfValuesModel implementation in the model. It is the value of this Model property that you need to get access to. The af:inputListOfValues has a ReturnPopupListener property that you can use to configure a managed bean method to receive notification when the user closes the LOV popup dialog by selecting the Ok button. This listener is not triggered when the cancel button is pressed. The managed bean signature can be created declaratively in Oracle JDeveloper 11g using the Edit option in the context menu next to the ReturnPopupListener field in the PropertyInspector. The empty method signature looks as shown below public void returnListener(ReturnPopupEvent returnPopupEvent) { } The ReturnPopupEvent object gives you access the RichInputListOfValues component instance, which represents the af:inputListOfValues component at runtime. From here you access the Model property of the component to then get a handle to the CollectionModel. The CollectionModel returns an instance of JUCtrlHierBinding in its getWrappedData method. Though there is no tree binding definition for the list of values dialog defined in the PageDef, it exists. Once you have access to this, you can read the row the user selected in the list of values dialog. See the following code: public void returnListener(ReturnPopupEvent returnPopupEvent) {   //access UI component instance from return event RichInputListOfValues lovField =        (RichInputListOfValues)returnPopupEvent.getSource();   //The LOVModel gives us access to the Collection Model and //ADF tree binding used to populate the lookup table ListOfValuesModel lovModel =  lovField.getModel(); CollectionModel collectionModel =          lovModel.getTableModel().getCollectionModel();     //The collection model wraps an instance of the ADF //FacesCtrlHierBinding, which is casted to JUCtrlHierBinding   JUCtrlHierBinding treeBinding =          (JUCtrlHierBinding) collectionModel.getWrappedData();     //the selected rows are defined in a RowKeySet.As the LOV table only   //supports single selections, there is only one entry in the rks RowKeySet rks = (RowKeySet) returnPopupEvent.getReturnValue();     //the ADF Faces table row key is a list. The list contains the //oracle.jbo.Key List tableRowKey = (List) rks.iterator().next();   //get the iterator binding for the LOV lookup table binding   DCIteratorBinding dciter = treeBinding.getDCIteratorBinding();   //get the selected row by its JBO key   Key key = (Key) tableRowKey.get(0); Row rw =  dciter.findRowByKeyString(key.toStringFormat(true)); //work with the row // ... }

  Read the article

• CodePlex Daily Summary for Thursday, February 24, 2011

  CodePlex Daily Summary for Thursday, February 24, 2011Popular ReleasesInstant Feature Builder for Visual Studio 2010: Instant Feature Builder 1.2: This is the binary version of the Instant Feature Builder. Once downloaded, double click to install into Visual Studio. Version 1.2 fixes: Rename FX to IFB to shorten path lengths Fix issue in ExecuteCommand Fix issue to workaround problem with VS Template writer The Instant Feature Builder is a tool which enables you, via drag-and-drop, to build a specific type of Visual Studio extension (VSIX) known as a Feature Extension. A Feature Extension packages project and/or item templates,...DirectQ: Release 1.8.7 (Beta): Beta release of 1.8.7 to get feedback on what works well, what doesn't work well, and what doesn't work at all. D3D9 hardware with ps2.0 a must. Faster, more streamlined and more integrated rendering capabilities with additional MP features and support.Smartkernel: Smartkernel: ????，??????Chiave File Encryption: Chiave 0.9.1: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Change Log from 0.9 Beta to 0.9.1: ======================= >Added option for system shutdown, sleep, hibernate after operation completed. >Minor Changes to the UI. >Numerous Bug fixes. Feedbacks are Welcome!....DotNetNuke® Store: 03.00.00: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! This version is the same code base as the version 02.01.51 RC, just some cleaning and source code release before submition to the release tracker for "official" release.ClosedXML - The easy way to OpenXML: ClosedXML 0.45.2: New on this release: 1) Added data validation. See Data Validation 2) Deleting or clearing cells deletes the hyperlinks too. New on v0.45.1 1) Fixed issues 6237, 6240 New on v0.45.2 1) Fixed issues 6257, 6266 New Examples Data ValidationOMEGA CMS: OMEGA CMA - Alpha 0.2: A few fixes for OMEGA Framework (DLL) A few tweeks for OMEGA CMSCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Xen: Graphics API for XNA: Xen 2.0: This is the final release of Xen; Xen 2.0. Xen 2.0 supports PC and Xbox 360 running XNA 4. The documentation download is coming soon Due to restrictions in XNA 4, Building Xen requires a DirectX 10 capable video card (Xen applications can still run on Windows Xp and DirectX 9 video cards)Silverlight????[???]: silverlight????[???]2.0: ???????，?????，????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...New ProjectsCompetition Management Platform: Paragliding Competition Management PlatformCS424 B2 Group - Car Management: CS424 B2 Group - Car ManagementEMS: The main aim of the system to perform environment inventorization.EVVA: EVVA ist ein Softwareprojekt zur Unterstützung privater Arbeitsvermittler FileSocialVB: A library to work with the filesocial.com web site and API through VB.NET. This is actually an offshoot of the http://twittervb.codeplex.com project. Though smaller, this will lead to a more compact library.Hash Crack - IGProgram: Hash Crack is a software program for hashes and passwords cracking. Hash Crack use dictionary or set of symbols for hashes cracking, and also support pwdump file format for Windows passwords cracking NTHash MD4. MD2, MD4, MD5, SHA1, SHA256, SHA384, SHA512Imail Spammer Killer: Bots seem to love picking off the weak passwords of IpSwitch IMail v10 users and using SMTP auth to spam the world with their new found account access. This project is a windows service to isolate and stop this activity by disabling the violated user account as it occurs.JVS2USB: Montage permettant de relier une IO ( capcom / Sega ) sur un PC via l'USB !!Library Reminder: Library ReminderMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMessage splliting without envelope in Biztalk 2009: Message splitting without envelope in Biztalk 2009. The project contains: - Source Code - Examples Article describing how to make it:Microsoft translator: Language translator designed to test Microsoft Translator web service API In Windows Phone 7 developed using Visual Studio 2010 in C#mrmuffin: Mr Muffin WP7 game for childrenNetwork Monitor: Simple application with a vu-meter style display of recent incoming network traffic. - Requires .NET 4, - Requires WinPCap (http://www.winpcap.org/) - Only tested to run under Windows 7NPhysics: NPhysics - Physical Data Types for .NETOpen SimRacing Results: Open SimRacing Results aims to provide an open standard for race results of PC SimRacing games (like iRacing, rFactor, NR2003, ...), allowing developers of league management systems to use a unique interface to get the results from, regardless of the simulation used.Orchard Image Gallery: Orchard Image Gallery project is intented to provide a Image Gallery content part and/or widget for the Orchard Project.Planning Poker for Windows Phone 7: Play planning poker on your Windows Phone 7.Publishing and consuming WCF in Biztalk 2009 and Visual Studio 2008: The file contains: Biztalk 2009 Project, C# Console Project, Example. Push Notification for Windows Phone 7 in php: WindowsPhonePushNotification enables you to use Microsoft Push Notification Service in phpQuksace Agjke: For more information, please visit <http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html>. http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html Read: a "GNU Make"-like utility for viewing Readme files: Read is a simple program to easily load and read README files on a UNIX-compliant system. It works in a similar way to GNU Make by searching a directory for a compatible file, in this case a Readme file, and loading it for reading using a text editor or viewer.SQL CE 3.5 persistence mapper for ECO IV: May need some adjustments for ECO V/VI, definitely needs some rewrite to support SQL CE 4.0 fullySQL Server Job Failure Notification System: A simple means of ensuring you know when SQLAgent jobs fail.SuperQuery: SuperQuery makes it easy to run the same batch of SQL across several databases on different SQL servers. SuperQuery supports all editions and versions of SQL Server from 2000 onwards. It is developed in C# using .NET 4 Client Profile.System.Net.Mail Extended: An Extension to the System.Net.Mail Namespace, adding a POP3 Client, Enhanced SMTP Client, IMAP Client, POP3 Server, SMTP Server, and IMAP Serve, all written in Visual C#.wow-combatlogs: A PowerShell module for working with combat logs generated by World of Warcraft.WPF UndoManager: WPF UndoManager provides a simple Undomanager on the base of WPF's CommandPattern. It use an implementation of the ICommand-interface to manage a history of actions.XO / TicTacToe game: Dynamic sized XO / TicTacToe game for Windows Phone 7 Build using Visual Studio 2010 and C#

  Read the article

• Workaround for datadude deployment bug - NullReferenceException

  - by jamiet

  I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN (    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged)   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels()   at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan()   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment)   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute()   at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute()   at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()   at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult)   Done executing task "SqlDeployTask" -- FAILED.  Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function  (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment.   Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --(    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work.   I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

  Read the article

• Test-Drive ASP.NET MVC Review

  - by Ben Griswold

  A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed.  But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard.  McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment  of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done.  Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight?  Well, no.  I don’t think any book can make that claim.  If that were possible, I think book list prices would skyrocket!  That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC.  Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started.  Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development?  Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach.  I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen.  If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

  Read the article

• Configure Oracle SOA JMSAdatper to Work with WLS JMS Topics

  - by fip

  The WebLogic JMS Topic are typically running in a WLS cluster. So as your SOA composites that receive these Topic messages. In some situation, the two clusters are the same while in others they are sepearate. The composites in SOA cluster are subscribers to the JMS Topic in WebLogic cluster. As nature of JMS Topic is meant to distribute the same copy of messages to all its subscribers, two questions arise immediately when it comes to load balancing the JMS Topic messages against the SOA composites: How to assure all of the SOA cluster members receive different messages instead of the same (duplicate) messages, even though the SOA cluster members are all subscribers to the Topic? How to make sure the messages are evenly distributed (load balanced) to SOA cluster members? Here we will walk through how to configure the JMS Topic, the JmsAdapter connection factory, as well as the composite so that the JMS Topic messages will be evenly distributed to same composite running off different SOA cluster nodes without causing duplication. 2. The typical configuration In this typical configuration, we achieve the load balancing of JMS Topic messages to JmsAdapters by configuring a partitioned distributed topic along with sharable subscriptions. You can reference the documentation for explanation of PDT. And this blog posting does a very good job to visually explain how this combination of configurations would message load balancing among clients of JMS Topics. Our job is to apply this configuration in the context of SOA JMS Adapters. To do so would involve the following steps: Step A. Configure JMS Topic to be UDD and PDT, at the WebLogic cluster that house the JMS Topic Step B. Configure JCA Connection Factory with proper ServerProperties at the SOA cluster Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) Here are more details of each step: Step A. Configure JMS Topic to be UDD and PDT, You do this at the WebLogic cluster that house the JMS Topic. You can follow the instructions at Administration Console Online Help to create a Uniform Distributed Topic. If you use WebLogic Console, then at the same administration screen you can specify "Distribution Type" to be "Uniform", and the Forwarding policy to "Partitioned", which would make the JMS Topic Uniform Distributed Destination and a Partitioned Distributed Topic, respectively Step B: Configure ServerProperties of JCA Connection Factory You do this step at the SOA cluster. This step is to make the JmsAdapter that connect to the JMS Topic through this JCA Connection Factory as a certain type of "client". When you configure the JCA Connection Factory for the JmsAdapter, you define the list of properties in FactoryProperties field, in a semi colon separated list: ClientID=myClient;ClientIDPolicy=UNRESTRICTED;SubscriptionSharingPolicy=SHARABLE;TopicMessageDistributionAll=false You can refer to Chapter 8.4.10 Accessing Distributed Destinations (Queues and Topics) on the WebLogic Server JMS of the Adapter User Guide for the meaning of these properties. Please note: Except for ClientID, other properties such as the ClientIDPolicy=UNRESTRICTED, SubscriptionSharingPolicy=SHARABLE and TopicMessageDistributionAll=false are all default settings for the JmsAdapter's connection factory. Therefore you do NOT have to explicitly specify them explicitly. All you need to do is the specify the ClientID. The ClientID is different from the subscriber ID that we are to discuss in the later steps. To make it simple, you just need to remember you need to specify the client ID and make it unique per connection factory. Here is the example setting: Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) In the following example, the value 'MySubscriberID-1' was given as the value of property 'DurableSubscriber': <adapter-config name="subscribe" adapter="JMS Adapter" wsdlLocation="subscribe.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata"> <connection-factory location="eis/wls/MyTestUDDTopic" UIJmsProvider="WLSJMS" UIConnectionName="ateam-hq24b"/> <endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message"> <activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec"> <property name="DurableSubscriber" value="MySubscriberID-1"/> <property name="PayloadType" value="TextMessage"/> <property name="UseMessageListener" value="false"/> <property name="DestinationName" value="jms/MyTestUDDTopic"/> </activation-spec> </endpoint-activation> </adapter-config> You can set the durable subscriber name either at composite's JmsAdapter wizard,or by directly editing the JmsAdapter's *.jca file within the Composite project. 2.The "atypical" configurations: For some systems, there may be restrictions that do not allow the afore mentioned "typical" configurations be applied. For examples, some deployments may be required to configure the JMS Topic to be Replicated Distributed Topic rather than Partition Distributed Topic. We would like to discuss those scenarios here: Configuration A: The JMS Topic is NOT PDT In this case, you need to define the message selector 'NOT JMS_WL_DDForwarded' in the adapter's *.jca file, to filter out those "replicated" messages. Configuration B. The ClientIDPolicy=RESTRICTED In this case, you need separate factories for different composites. More accurately, you need separate factories for different *.jca file of JmsAdapter. References: Managing Durable Subscription WebLogic JMS Partitioned Distributed Topics and Shared Subscriptions JMS Troubleshooting: Configuring JMS Message Logging: Advanced Programming with Distributed Destinations Using the JMS Destination Availability Helper API

  Read the article

• Searching for the last logon of users in Active Directory

  - by Robert May

  I needed to clean out a bunch of old accounts at Veracity Solutions, and wanted to delete those that hadn’t used their account in more than a year. I found that AD has a property on objects called the lastLogonTimestamp.  However, this value isn’t exposed to you in any useful fashion.  Sure, you can pull up ADSI Edit and and eventually get to it there, but it’s painful. I spent some time searching, and discovered that there’s not much out there to help, so I thought a blog post showing exactly how to get at this information would be in order. Basically, what you end up doing is using System.DirectoryServices to search for accounts and then filtering those for users, doing some conversion and such to make it happen.  Basically, the end result of this is that you get a list of users with their logon information and you can then do with that what you will.  I turned my list into an observable collection and bound it into a XAML form. One important note, you need to add a reference to ActiveDs Type Library in the COM section of the world in references to get to LargeInteger. Here’s the class: namespace Veracity.Utilities { using System; using System.Collections.Generic; using System.DirectoryServices; using ActiveDs; using log4net; /// <summary> /// Finds users inside of the active directory system. /// </summary> public class UserFinder { /// <summary> /// Creates the default logger /// </summary> private static readonly ILog log = LogManager.GetLogger(typeof(UserFinder)); /// <summary> /// Finds last logon information /// </summary> /// <param name="domain">The domain to search.</param> /// <param name="userName">The username for the query.</param> /// <param name="password">The password for the query.</param> /// <returns>A list of users with their last logon information.</returns> public IList<UserLoginInformation> GetLastLogonInformation(string domain, string userName, string password) { IList<UserLoginInformation> result = new List<UserLoginInformation>(); DirectoryEntry entry = new DirectoryEntry(domain, userName, password, AuthenticationTypes.Secure); DirectorySearcher directorySearcher = new DirectorySearcher(entry); directorySearcher.PropertyNamesOnly = true; directorySearcher.PropertiesToLoad.Add("name"); directorySearcher.PropertiesToLoad.Add("lastLogonTimeStamp"); SearchResultCollection searchResults; try { searchResults = directorySearcher.FindAll(); } catch (System.Exception ex) { log.Error("Failed to do a find all.", ex); throw; } try { foreach (SearchResult searchResult in searchResults) { DirectoryEntry resultEntry = searchResult.GetDirectoryEntry(); if (resultEntry.SchemaClassName == "user") { UserLoginInformation logon = new UserLoginInformation(); logon.Name = resultEntry.Name; PropertyValueCollection timeStampObject = resultEntry.Properties["lastLogonTimeStamp"]; if (timeStampObject.Count > 0) { IADsLargeInteger logonTimeStamp = (IADsLargeInteger)timeStampObject[0]; long lastLogon = (long)((uint)logonTimeStamp.LowPart + (((long)logonTimeStamp.HighPart) << 32)); logon.LastLogonTime = DateTime.FromFileTime(lastLogon); } result.Add(logon); } } } catch (System.Exception ex) { log.Error("Failed to iterate search results.", ex); throw; } return result; } } } Some important things to note: Username and Password can be set to null and if your computer us part of the domain, this may still work. Domain should be set to something like LDAP://servername/CN=Users,CN=Domain,CN=com You’re actually getting a com object back, so that’s why the LongInteger conversions are happening.  The class for UserLoginInformation looks like this:   namespace Veracity.Utilities { using System; /// <summary> /// Represents user login information. /// </summary> public class UserLoginInformation { /// <summary> /// Gets or sets Name /// </summary> public string Name { get; set; } /// <summary> /// Gets or sets LastLogonTime /// </summary> public DateTime LastLogonTime { get; set; } /// <summary> /// Gets the age of the account. /// </summary> public TimeSpan AccountAge { get { TimeSpan result = TimeSpan.Zero; if (this.LastLogonTime != DateTime.MinValue) { result = DateTime.Now.Subtract(this.LastLogonTime); } return result; } } } } I hope this is useful and instructive. Technorati Tags: Active Directory

  Read the article

• RIDC Accelerator for Portal

  - by Stefan Krantz

  What is RIDC?Remote IntraDoc Client is a Java enabled API that leverages simple transportation protocols like Socket, HTTP and JAX/WS to execute content service operations in WebCenter Content Server. Each operation by design in the Content Server will execute stateless and return a complete result of the request. Each request object simply specifies the in a Map format (key and value pairs) what service to call and what parameters settings to apply. The result responded with will be built on the same Map format (key and value pairs). The possibilities with RIDC is endless since you can consume any available service (even custom made ones), RIDC can be executed from any Java SE application that has any WebCenter Content Services needs. WebCenter Portal and the example Accelerator RIDC adapter frameworkWebCenter Portal currently integrates and leverages WebCenter Content Services to enable available use cases in the portal today, like Content Presenter and Doc Lib. However the current use cases only covers few of the scenarios that the Content Server has to offer, in addition to the existing use cases it is not rare that the customer requirements requires additional steps and functionality that is provided by WebCenter Content but not part of the use cases from the WebCenter Portal.The good news to this is RIDC, the second good news is that WebCenter Portal already leverages the RIDC and has a connection management framework in place. The million dollar question here is how can I leverage this infrastructure for my custom use cases. Oracle A-Team has during its interactions produced a accelerator adapter framework that will reuse and leverage the existing connections provisioned in the webcenter portal application (works for WebCenter Spaces as well), as well as a very comprehensive design patter to minimize the work involved when exposing functionality. Let me introduce the RIDCCommon framework for accelerating WebCenter Content consumption from WebCenter Portal including Spaces. How do I get started?Through a few easy steps you will be on your way, Extract the zip file RIDCCommon.zip to the WebCenter Portal Application file structure (PortalApp) Open you Portal Application in JDeveloper (PS4/PS5) select to open the project in your application - this will add the project as a member of the application Update the Portal project dependencies to include the new RIDCCommon project Make sure that you WebCenter Content Server connection is marked as primary (a checkbox at the top of the connection properties form) You should by this stage have a similar structure in your JDeveloper Application Project Portal Project PortalWebAssets Project RIDCCommon Since the API is coming with some example operations that has already been exposed as DataControl actions, if you open Data Controls accordion you should see following: How do I implement my own operation? Create a new Java Class in for example com.oracle.ateam.portal.ridc.operation call it (GetDocInfoOperation) Extend the abstract class com.oracle.ateam.portal.ridc.operation.RIDCAbstractOperation and implement the interface com.oracle.ateam.portal.ridc.operation.IRIDCOperation The only method you actually are required to implement is execute(RIDCManager, IdcClient, IdcContext) The best practice to set object references for the operation is through the Constructor, example below public GetDocInfoOperation(String dDocName)By leveraging the constructor you can easily force the implementing class to pass right information, you can also overload the Constructor with more or less parameters as required Implement the execute method, the work you supposed to execute here is creating a new request binder and retrieve a response binder with the information in the request binder.In this case the dDocName for which we want the DocInfo Secondly you have to process the response binder by extracting the information you need from the request and restore this information in a simple POJO Java BeanIn the example below we do this in private void processResult(DataBinder responseData) - the new SearchDataObject is a Member of the GetDocInfoOperation so we can return this from a access method. Since the RIDCCommon API leverage template pattern for the operations you are now required to add a method that will enable access to the result after the execution of the operationIn the example below we added the method public SearchDataObject getDataObject() - this method returns the pre processed SearchDataObject from the execute method  This is it, as you can see on the code below you do not need more than 32 lines of very simple code 1: public class GetDocInfoOperation extends RIDCAbstractOperation implements IRIDCOperation { 2: private static final String DOC_INFO_BY_NAME = "DOC_INFO_BY_NAME"; 3: private String dDocName = null; 4: private SearchDataObject sdo = null; 5: 6: public GetDocInfoOperation(String dDocName) { 7: super(); 8: this.dDocName = dDocName; 9: } 10:   11: public boolean execute(RIDCManager manager, IdcClient client, 12: IdcContext userContext) throws Exception { 13: DataBinder dataBinder = createNewRequestBinder(DOC_INFO_BY_NAME); 14: dataBinder.putLocal(DocumentAttributeDef.NAME.getName(), dDocName); 15: 16: DataBinder responseData = getResponseBinder(dataBinder); 17: processResult(responseData); 18: return true; 19: } 20: 21: private void processResult(DataBinder responseData) { 22: DataResultSet rs = responseData.getResultSet("DOC_INFO"); 23: for(DataObject dobj : rs.getRows()) { 24: this.sdo = new SearchDataObject(dobj); 25: } 26: super.setMessage(responseData.getLocal(ATTR_MESSAGE)); 27: } 28: 29: public SearchDataObject getDataObject() { 30: return this.sdo; 31: } 32: } How do I execute my operation? In the previous section we described how to create a operation, so by now you should be ready to execute the operation Step one either add a method to the class  com.oracle.ateam.portal.datacontrol.ContentServicesDC or a class of your own choiceRemember the RIDCManager is a very light object and can be created where needed Create a method signature look like this public SearchDataObject getDocInfo(String dDocName) throws Exception In the method body - create a new instance of GetDocInfoOperation and meet the constructor requirements by passing the dDocNameGetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName) Execute the operation via the RIDCManager instance rMgr.executeOperation(docInfo) Return the result by accessing it from the executed operationreturn docInfo.getDataObject() 1: private RIDCManager rMgr = null; 2: private String lastOperationMessage = null; 3:   4: public ContentServicesDC() { 5: super(); 6: this.rMgr = new RIDCManager(); 7: } 8: .... 9: public SearchDataObject getDocInfo(String dDocName) throws Exception { 10: GetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName); 11: boolean boolVal = rMgr.executeOperation(docInfo); 12: lastOperationMessage = docInfo.getMessage(); 13: return docInfo.getDataObject(); 14: }   Get the binaries! The enclosed code in a example that can be used as a reference on how to consume and leverage similar use cases, user has to guarantee appropriate quality and support.  Download link: https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/RIDCCommon.zip RIDC API Referencehttp://docs.oracle.com/cd/E23943_01/apirefs.1111/e17274/toc.htm

  Read the article

• Some New .NET Toys (Repost)

  - by Kevin Grossnicklaus

  Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit. It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft. The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of. The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today. Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1. You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)? Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox). With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target. Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks. Other projects can now reference this portable library and be provided assemblies custom built to their environment. This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight. You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model. Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here. You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/. This site allows you to easily search for small samples of code related to a particular technology or platform. If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs. You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others. Samples are packaged into the VS .vsix format and include any necessary references/dependencies. By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done. Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need. I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities. Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results. First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from. For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings. All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

  Read the article

• Record and Play your WebLogic Console Tasks Like a DVR

  - by james.bayer

  Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax.  I’ve previously written about this feature called Work Managers and the associated constraints.  However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST.  I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced.  Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR.  Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API.  I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times.  Obviously the Cast Away and The Big Labowski references show some age.  I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment.  Even in development environments you can make a case that it makes sense to start the automation for environments downstream.  I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console.  It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording.  See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording.  Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit()   cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0')   cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName')   cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName))   cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false)   activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console.  Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit().   For more help, use help(edit)   Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer     Exiting WebLogic Scripting Tool.   Now if you go back and look in the console the changes have been made and we now have a compete script.  Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you!  Happy scripting.

  Read the article

• Whitepaper list for the application framework

  - by Rick Finley

  We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework).  These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features.  This is reposted from the OUAF blog:  http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management           560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series  A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >