Search Results

Search found 19385 results on 776 pages for 'canonical link'.

Page 164/776 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • What does intermittent "Input/output error" suggest?

    - by dan
    Lately my Ubuntu 12 system has started acting very strange. Sometimes the computer freezes and then unfreezes 2 minutes later, and other times when I try a basic command like less I get the error bash: /usr/bin/less: Input/output error. But this is intermittent too. Any suggestions? Also if I try sudo reboot and enter my password, I get sudo: unable to open /var/lib/sudo/plato/7: Read-only file system Before I used to be able to do sudo reboot fine. If I tail /var/log/syslog I do see these curious lines: .... ata1: softreset failed (device not ready) .... ata1: hard resettting link .... ata1: link is slow to respond, please be patient (ready=0) What can I do to fix this?

    Read the article

  • Repeated disconnects on WPA PEAP network

    - by exasperated
    My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm                241872  0  mac80211              606457  1 iwldvm iwlwifi               173516  1 iwldvm cfg80211              511019  3 iwlwifi,mac80211,iwldvm dmesg: [    3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [    3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [    3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [    3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [    3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [    3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [    3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [    3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [    3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [    3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [  375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [  375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw:    *-network        description: Wireless interface        product: Centrino Advanced-N 6235        vendor: Intel Corporation        physical id: 0        bus info: pci@0000:03:00.0        logical name: wlan0        version: 24        serial: b4:b6:76:a0:4b:3c        width: 64 bits        clock: 33MHz        capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless        configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn        resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9                     Channel:36                     Frequency:5.18 GHz (Channel 36)                     Quality=29/70  Signal level=-81 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=0000004ff3fe419b                     Extra: Last beacon: 27820ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030124                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1624001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000           Cell 04 - Address: 24:DE:C6:B0:C3:E9                     Channel:149                     Frequency:5.745 GHz                     Quality=28/70  Signal level=-82 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=000000181f60e19c                     Extra: Last beacon: 28680ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030195                     IE: Unknown: 050400010000                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1695001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000                     IE: Unknown: DD07000B8601040817                     IE: Unknown: DD0E000B860103006170313930333032           Cell 09 - Address: 24:DE:C6:B0:C0:29                     Channel:149                     Frequency:5.745 GHz                     Quality=39/70  Signal level=-71 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=00000112fb688ede                     Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0     Link encap:Ethernet  HWaddr b4:b6:76:a0:4b:3c             inet addr:10.250.16.220  Bcast:10.250.31.255  Mask:255.255.240.0           inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:230023 errors:0 dropped:0 overruns:0 frame:0           TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:255999759 (255.9 MB)  TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0     IEEE 802.11abgn  ESSID:"CatChat2x"             Mode:Managed  Frequency:5.745 GHz  Access Point: 24:DE:C6:B0:C0:29              Bit Rate=6 Mb/s   Tx-Power=15 dBm              Retry  long limit:7   RTS thr:off   Fragment thr:off           Power Management:off           Link Quality=36/70  Signal level=-74 dBm             Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0           Tx excessive retries:0  Invalid misc:3   Missed beacon:0

    Read the article

  • "Popular searches for this page" links with links to the same page, SEO difference?

    - by Rory McCann
    I've seen a few pages that have a section with "Popular searches for this page" and then have the search terms in a link pointing back to the same page (e.g. http://theenglishchillicompany.co.uk/the-complete-chilli-pepper-book-a-gardeners-guide-to-choosing-growing-preserving-and-cooking/) I assume they are doing it for SEO purposes (with more links to the page with the desired search terms). Does this make a difference? It seems strange that a link on page A to page A would be counted! Am I wrong?

    Read the article

  • ETPM/OUAF 2.3.1 Framework Overview - Session 4

    - by MHundal
    The OUAF Framework Session 4 is now available. This session covered the following topics: 1. Extendable Data Areas - how to extend base owned Data Areas 2. Bundling - how to bundle ETPM Configuration Objects in ETPM 3. Audit on Inquiry - how to enable and view audit on inquiry 4. Advanced Debug - demonstration of the advanced debugger 5. Maintenance Dialogue- An overview of objects required to work with MO's. You can stream the recording using the following link: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=71155037&rKey=63c3e75d32277283   You can download the recording using the following link: https://oracletalk.webex.com/oracletalk/lsr.php?AT=dw&SP=MC&rID=71155037&rKey=f3126d1d2894f754

    Read the article

  • gstreamer pulseaudio echo cancellation

    - by user3618055
    I'm implementing a voip application using gstreamer, i use the example of the rtp in the plugin-good! i want to implement echo cancellation, i couldn't use the speex echo canceller with gstreamer because the input and the output are not in the same process. So, i want to use pulse audio to make echo cancellation? can any one help me how to deal with? the sender voice is pipeline = gst_pipeline_new (NULL); g_assert (pipeline); /* the audio capture and format conversion */ audiosrc = gst_element_factory_make (pulsesrc, "audiosrc"); g_assert (audiosrc); audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); /* the encoding and payloading */ audioenc = gst_element_factory_make (AUDIO_ENC, "audioenc"); g_assert (audioenc); audiopay = gst_element_factory_make (AUDIO_PAY, "audiopay"); g_assert (audiopay); /* add capture and payloading to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiosrc, audioconv, audiores, audioenc, audiopay, NULL); if (!gst_element_link_many (audiosrc, audioconv, audiores, audioenc, audiopay, NULL)) { g_error ("Failed to link audiosrc, audioconv, audioresample, " "audio encoder and audio payloader"); } and the receiver is : gst_bin_add_many (GST_BIN (pipeline), rtpsrc, rtcpsrc, rtcpsink, NULL); /* the depayloading and decoding */ audiodepay = gst_element_factory_make (AUDIO_DEPAY, "audiodepay"); g_assert (audiodepay); audiodec = gst_element_factory_make (AUDIO_DEC, "audiodec"); g_assert (audiodec); /* the audio playback and format conversion */ audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); audiosink = gst_element_factory_make (pulsesink, "audiosink"); g_assert (audiosink); /* add depayloading and playback to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiodepay, audiodec, audioconv, audiores, audiosink, NULL); res = gst_element_link_many (audiodepay, audiodec, audioconv, audiores, audiosink, NULL); g_assert (res == TRUE); i tried to change gstreamer proprietes to pulseaudio server in input and output and i used "pactl load-module module-echo-cancel aec_method=adrian" but i still listen to echo!! any one could help please thanks!!

    Read the article

  • Game of Thrones Style Sigils for Video Games

    - by Jason Fitzpatrick
    What would the video game families of the Mushroom Kingdom, Hyrule, and more look like if they were represented by Game of Thrones style sigils? Dorkly shows us the House of Mario, Link, and more. Hit up the link below to check out the imagined sigils for a variety of video games families–if you’re in the mood for wallpapers based on the actual Game of Thrones families, makes sure to check out the Extras section for the show on HBO.com. Game of Thrones House Sigils for Video Game Families [via Neatorama] 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

    Read the article

  • Google indexed my main site's content under subdomains

    - by Christie Angelwitch
    Google is indexing top level domain content as though it belongs on subdomains and I want to disable this. My site has wildcards enabled and we also have two subdomains with unique content. The first subdomain serves as a blog, the second one has only one page. Both have backlinks. Google has indexed content from the main site under the subdomains as well. Let's say that we have a page at example.com/page.html . The same page has also been indexed as subdomain.example.com/page.html as well and sometimes ranks better than the one located at the main site. The thing is that we never placed this content at the subdomain. I've thought about adding canonical tags at the subdomains to help with the duplicate content issue. How can I stop Google from indexing those pages? I don't even know how Google found those, since we never placed them at the subdomains.

    Read the article

  • Ubuntu Server Cannot Route to the Internet

    - by ejes
    I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

    Read the article

  • A Trio of Presentations: Little Wonders, StyleCop, and LINQ/Lambdas

    - by James Michael Hare
    This week is a busy week for me.  First of all I’m giving another presentation on a LINQ/Lambda primer for the rest of the developers in my company.  Of Lambdas and LINQ View more presentations from BlackRabbitCoder Then this Saturday the 25th of June I’ll be reprising my Little Wonders presentation for the Kansas City Developers Camp.  If you are in the area I highly recommend attending and seeing the other great presentations as well.  Their link is here. Little Wonders View more presentations from BlackRabbitCoder Finally, this Monday the 27th I’ll be speaking at the Saint Louis .NET Users group, giving my Automating Code Standards Using StyleCop and FxCop presentation.  If you are in the Saint Louis area stop by!  There’s two other simultaneous presentations as well if they’re more suited to your interests.  The link for the SLDNUG is here. Automating C# Coding Standards using StyleCop and FxCop View more presentations from BlackRabbitCoder Tweet Technorati Tags: C#,.NET,LINQ,Lambda,StyleCop,FxCop,Little Wonders

    Read the article

  • Build a Water Rocket for Cheap Summer Fun

    - by Jason Fitzpatrick
    If you’re looking for a cheap thrill this summer (and an easy way to sneak some covert summer school lessons about physics into the mix), this fun DIY project turns soda bottles into rockets. Over at Geek Dad they share a roundup of information about building soda bottle rockets including plans, information about the physics behind the rockets, and more. Rather than link to one specific plan, we’d suggest hitting up the roundup at the link below and picking your favorite. Soda Bottle Water Rockets for Summer Fun [Geek Dad] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Redirecting non existing post to homepage; is that good for SEO?

    - by BlackEagle
    I am checking my website out on Google Webmasters and I am seeing an astonishing 5000 links that could not be found by Google's Crawlers. That's normal, because my website is built in a manner that users can drop their own things, which also lead to 404 pages. Not a problem at all if I can find a workaround of course... So my question is: what if I made a function or a mod rewrite that will check if the link exists (a post for example) and if not, it will redirect it to the home page. Is this good for SEO? Will Google see this as 'link found'? How do I have to look at this problem?

    Read the article

  • XNA Diffuse Shader Issue. Edge lighting problem. Image Attached

    - by adtither
    As you can see in this image the diffuse shading is working correctly in some places but in other places such as the the bottom of the sphere you can see the squares/triangles of the mesh. Any idea what would be causing this? Let me know if you need anymore information related to code. I can upload my normals calculations and shader effect if required. EDIT: Here's a link to the shader I'm using http://pastebin.com/gymVc7CP Link to normals calculations: http://pastebin.com/KnMGdzHP Seems to be an issue with edge lighting. Can't seem to see where I'm going wrong with the normals calculations though.

    Read the article

  • Unity greeter background on Xubuntu 12.04

    - by user67594
    I'm running Xubuntu 12.04 and using the Unity greeter with LightDM. Everything works well except for I can never change the background. I've tried editing the .conf file, editing the gsettings as the lightdm user, even compiling an override file for com.canonical.unity-greeter. All of these fail, and I end with a dark purple background. I was able to get rid of the grid using gsettings, but that's about it. I've enabled switching user backgrounds, but that never works. I'm wondering whether this is Xfce/Xubuntu specific, or a bug.

    Read the article

  • Add SQL Azure database to Azure Web Role and persist data with entity framework code first.

    - by MagnusKarlsson
    In my last post I went for a warts n all approach to set up a web role on Azure. In this post I’ll describe how to add an SQL Azure database to the project. This will be described with an as minimal as possible amount of code and screen dumps. All questions are welcome in the comments area. Please don’t email since questions answered in the comments field is made available to other visitors. As an example we will add a comments section to the site we used in the previous post (Länk här). Steps: 1. Create a Comments entity and then use Scaffolding to set up controller and view, and add ConnectionString to web.config. 2. Create SQL Azure database in Management Portal and link the new database 3. Test it online!   1. Right click Models folder, choose add, choose “class…” . Name the Class Comment. 1.1 Replace the Code in the class with the following: using System.Data.Entity; namespace MvcWebRole1.Models { public class Comment {    public int CommentId { get; set; }    public string Name { get; set; }      public string Content { get; set; } } public class CommentsDb : DbContext { public DbSet<Comment> CommentEntries { get; set; } } } Now Entity Framework can create a database and a table named Comment. Build your project to assert there are no build errors.   1.2 Right click Controllers folder, choose add, choose “class…” . Name the Class CommentController and fill out the values as in the example below.     1.3 Click Add. Visual Studio now creates default View for CRUD operations and a Controller adhering to these and opens them. 1.3 Open Web.config and add the following connectionstring in <connectionStrings> node. <add name="CommentsDb” connectionString="data source=(LocalDB)\v11.0;Integrated Security=SSPI;AttachDbFileName=|DataDirectory|\CommentsDb.mdf;Initial Catalog=CommentsDb;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />   1.4 Save All and press F5 to start the application. 1.5 Go to http://127.0.0.1:81/Comments which will redirect you through CommentsController to the Index View which looks like this:     Click Create new. In the Create-view, add name and content and press Create.   1: // 2: // POST: /Comments/Create 3:  4: [HttpPost] 5: public ActionResult Create(Comment comment) 6: { 7: if (ModelState.IsValid) 8: { 9: db.CommentEntries.Add(comment); 10: db.SaveChanges(); 11: return RedirectToAction("Index"); 12: } 13:  14: return View(comment); 15: } 16:    The default View() is Index so that is the View you will come to. Looking like this: 1: // 2: // GET: /Comments/ 3: 4: public ActionResult Index() 5: { 6: return View(db.CommentEntries.ToList()); 7: } Resulting in the following screen dump(success!):   2. Now, go to the Management portal and Create a new db.   2.1 With the new database created. Click the DB icon in the left most menu. Then click the newly created database. Click DASHBOARD in the top menu. Finally click Connections strings in the right menu to get the connection string we need to add in our web.debug.config file.   2.2 Now, take a copy of the connection String earlier added to the web.config and paste in web.debug.conifg in the connectionstrings node. Replace everything within “ “ in the copied connectionstring with that you got from SQL Azure. You will have something like this:   2.3 Rebuild the application, right click the cloud project and choose “Package…” (if you haven’t set up publishing profile which we will do in our next blog post). Remember to choose the right config file, use debug for staging and release for production so your databases won’t collide. You should see something like this:   2.4 Go to Management Portal and click the Web Services menu, choose your service and click update in the bottom menu.   2.5 Link the newly created database to your application. Click the LINKED RESOURCES in the top menu and then click “Link” in the bottom menu. You should get something like this. 3. Alright then. Under the Dashboard you can find the link to your application. Click it to open it in a browser and then go to ~/Comments to try it out just the way we did locally. Success and end of this story!

    Read the article

  • How can I make a browser trust my SSL certificate when I request resources from an external server?

    - by William David Edwards
    I have installed an SSL certificate on one of my domains and it works perfectly, but on some pages I include a Google Font, which causes my certificate icon to change in: instead of: The reason, according to Google Chrome (translated with Google Translate): Your connection to xxxxxx is encrypted with 128-bit encryption. This page includes other resources which are not secure. These resources can be viewed by others while in transit and can be modified to fit. So how can I make the browser 'trust' my SSL certificate, even though I request an external resource from Google Fonts? And also, does it matter that I use links like these: <link rel='stylesheet' id='et-shortcodes-css-css' href='https://xxxxxx/wp-content/themes/Divi/epanel/shortcodes/css/shortcodes.css?ver=3.0' type='text/css' media='all' /> instead of <link rel='stylesheet' id='et-shortcodes-css-css' href='wp-content/themes/Divi/epanel/shortcodes/css/shortcodes.css?ver=3.0' type='text/css' media='all' /> Thanks!

    Read the article

  • How to block FeedReader from fetching my content to their site?

    - by Wei Kai
    As you all can see from the picture below, my site's content is duplicated by FeedReader and indexed at Google. When I clicked at the FeedReader link, it uses some sort of iFrame to draw content from my site live. This forms some sort of content duplication to me, and I believe it does harm to my site. (Stackoverflow doesn't allow me to post image due to new account, pls click at the link above to see the picture, million thanks to you.) What can I do to prevent Feedreader to fetch my content to their site? I know robots.txt can perform such function, but I don't know how to do it. Any help would be much appreciated. I have also highlighted this issue to FeedReader 2 days ago, but yet to get any reply from them.

    Read the article

  • Potential issues with multiple home pages

    - by Maxim Zaslavsky
    I have a site where I want to have two different home pages: a general description page for anonymous users, and a dashboard page for logged-in users. I am debating between two implementations: Both pages live at / The page for anonymous users is located at / and the dashboard is at /dashboard, with automatic redirection between them based on whether a given user is logged in (e.g., if you're logged in and navigate to /, you are redirected to /dashboard. Is it cleaner to have both pages use the same URL or separate URLs? Also, I imagine that choices for that question will affect the following: Caching: the anonymous page would be completely cached, while the logged-in page would not be cached at all (except for static resources). This could lead to issues with server caching, request speed, and UX (such as if one version of the page is cached in a user's browser when the other version should be displayed, instead). SEO: how would search engines react to such canonical URLs? Load time (due to redirects or to the server having to always reevaluate which page to display)

    Read the article

  • HTML5 valid Google+ Button - Bad value publisher for attribute rel

    - by mrtsherman
    I recently migrated my website from xhtml transitional to html5. Specifically so that I could make use of valid block level anchor tags. <a><div /></a>. When running validation I encountered the following error: Bad value publisher for attribute rel on element link: Keyword publisher is not registered. But according to this page, that is exactly what I am supposed to do. https://developers.google.com/+/plugins/badge/#connect My code: <link href="https://plus.google.com/xxxxxxxxxxxxxxxx" rel="publisher" /> <a href="https://plus.google.com/xxxxxxxxxxxxxxx?prsrc=3" style="text-decoration:none;"> <img src="https://ssl.gstatic.com/images/icons/gplus-16.png" alt="" style="border:0;width:16px;height:16px;"/> </a> I can't figure out how to implement this in an html5 compliant way. Can anyone help?

    Read the article

  • The Nine Cs of Customer Engagement

    - by Michael Snow
    Avoid Social Media Fatigue - Learn the 9 C's of Customer Engagement inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Have We Hit a Social-Media Plateau? In recent years, social media has evolved from a cool but unproven medium to become the foundation of pragmatic social business and a driver of business value. Yet, time is running out for businesses to make the most out of this channel. This isn’t a warning. It’s a fact. Join leading industry analyst R “Ray” Wang as he explains how to apply the nine Cs of engagement to strengthen customer relationships. Learn: How to overcome social-media fatigue and make the most of the medium Why engagement is the most critical factor in the age of overexposure The nine pillars of successful customer engagement Register for the eighth Webcast in the Social Business Thought Leaders series today. Register Now Thurs., Sept. 20, 2012 10 a.m. PT / 1 p.m. ET Presented by: R “Ray” Wang Principal Analyst and CEO, Constellation Research Christian Finn Senior Director, Product Management Oracle Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement SEV100103386 Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time.Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

    Read the article

  • GWT: Generate more complete crawl error report

    - by Mike
    I'm a developer in charge of managing Webmasters and related issues (including correcting crawl errors) for dozens (hundreds, maybe?) of active sites and as part of my duties I create a report of every discrepancy, including all pages generating a 404 and all pages that link to those pages. Currently within Webmaster Tools I'm able to download a csv file of all pages with a 404 response, but I'm then having to manually click on every single one of those links and copy the "linked from" field to paste into my spreadsheet. This is extremely tedious and seems unnecessary; I would expect the ability to download all that data at once. I'm ultimately looking for the end result of one csv file that has every url with a 404, but also has every url that links to each one of them. Am I overlooking this functionality somewhere or does anyone have a good solution? Edit 1 (2/11/2013): Example of what the csv output looks like now: URL,Response Code,News Error,Detected,Category http://www.abcdef.com/123.php,404,,11/12/13,Not found http://www.abcdef.com/456.php,404,,11/12/13,Not found Which is great, but let's say 123.php has 5 pages that link to it. Now I have to duplicate that row in my spreadsheet 4 more times, then go into Webmasters, get all the url's that link to the page, and add that data to my spreadsheet. The output I would prefer: URL,Response Code,Linked From,News Error,Detected,Category http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found Note the (hypothetical) addition of a "Linked From" column, as well as the fact there are only 2 unique URL's now (like before) but all of the "Linked To" pages are shown in one report. Edit 2 (2/12/2013): To clarify, my question is less about detecting and correcting 404's, but more about generating a report of what Google has listed as errors. Oftentimes, these errors aren't even valid anymore but I still need documentation to show that Google detected a problem and that problem is now fixed. Many of the "linked from" url's I find are actually outdated, cached resources. For example, I'll frequently see that the linked-from url is the sitemap, which is actually an old sitemap cached by Google that points to an old page. Neither the sitemap or old page exist, but they still appear in my crawl error reports because they are cached resources.

    Read the article

  • Content appearing under multiple categories; anything I can do to prevent duplicate penalty?

    - by dave
    I'm working with a CMS that allows me to post content in to multiple categories. So, I have this link: www.site.com/category/green-cars Here are the GREEN cars TITLE: A Big green car INTRO: this is a great big green car. But then I have this link: www.site.com/category/big-cars Here are the BIG cars TITLE: A Big green car INTRO: this is a great big green car. So essentially - for every item of content, header and the intro sentence is the same regardless of the category the item appears in. Will a search engine penalise the site for having the same content in this way? I've looked at canonical links, but I don't think this is relevant here. All my content points to the same page - but the content may appear in multiple categories first. Or am I worrying about nothing? Thanks.

    Read the article

  • iwlwifi on lenovo z570 disabled by hardware switch

    - by Kevin Gallagher
    It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

    Read the article

  • Webinar Recording on Cross Platform Development with MonoTouch and Mono for Android

    - by Wallym
    The iPhone and Android are dominant in the marketplace. The two platforms currently have 85% of the smartphone marketplace and are continuing to grow that marketshare. Developers are being tasked with targeting these two platforms. In this session, we’ll take a high level look at how we can use c# and .NET knowledge to share code between iOS and and Android. We’ll look at linked files, using the Xamarin Mobile API, the challenges of running across platforms and frameworks, as well as other features of Visual Studio, Monotouch, MonoDevelop, and Mono for Android that allows us to write as much code that can run on both platforms.The following link is a recording on Cross Platform Development with MonoTouch and Mono for Android. I am guessing that the link only works in IE. That's out of my control.

    Read the article

  • Picture lens doesn't find anything

    - by Han Cnx
    I get Facebook results, but nothing from my computer. If I open a terminal and use 'locate' then I can find stuff, but the picture lens is empty. Note that my picture files are on an NTFS partition. I have made a link named 'Pictures' in my home folder that points to the location where the picture files are. Again, this works with the 'locate' command and it also works for the Music lens, which is also a link in my home folder. It also (kinda) works for the Video lens, though it only wants to find videos I have opened, which seems not consistent with the other lenses. (and also not very useful this way)

    Read the article

  • Randomly generate directed graph on a grid

    - by Talon876
    I am trying to randomly generate a directed graph for the purpose of making a puzzle game similar to the ice sliding puzzles from Pokemon. This is essentially what I want to be able to randomly generate: http://bulbanews.bulbagarden.net/wiki/Crunching_the_numbers:_Graph_theory. I need to be able to limit the size of the graph in an x and y dimension. In the example given in the link, it would be restricted to an 8x4 grid. The problem I am running into is not randomly generating the graph, but randomly generating a graph, which I can properly map out in a 2d space, since I need something (like a rock) on the opposite side of a node, to make it visually make sense when you stop sliding. The problem with this is that sometimes the rock ends up in the path between two other nodes or possibly on another node itself, which causes the entire graph to become broken. After discussing the problem with a few people I know, we came to a couple of conclusions that may lead to a solution. Including the obstacles in the grid as part of the graph when constructing it. Start out with a fully filled grid and just draw a random path and delete out blocks that will make that path work. The problem then becomes figuring out which ones to delete to avoid introducing an additional, shorter path. We were also thinking a dynamic programming algorithm may be beneficial, though none of us are too skilled with creating dynamic programming algorithms from nothing. Any ideas or references about what this problem is officially called (if it's an official graph problem) would be most helpful. Here are some examples of what I have accomplished so far by just randomly placing blocks and generating the navigation graph from the chosen start/finish. The idea (as described in the previous link) is you start at the green S and want to get to the green F. You do this by moving up/down/left/right and you continue moving in the direction chosen until you hit a wall. In these pictures, grey is a wall, white is the floor, and the purple line is the minimum length from start to finish, and the black lines and grey dots represented possible paths. Here are some bad examples of randomly generated graphs: http://i.stack.imgur.com/9uaM6.png Here are some good examples of randomly generated (or hand tweaked) graphs: i.stack.imgur.com/uUGeL.png (can't post another link, sorry) I've also seemed to notice the more challenging ones when actually playing this as a puzzle are ones which have lots of high degree nodes along the minimum path.

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >