Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 164/311 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Mouse Not Working on Boot

  - by user88043

  I have seen several topics regarding this situation, but none of them truly address my issue (that, or there are no answers that solve the issue.) Upon booting into Ubuntu 12.04.1 x64 my mouse wired USB mouse (Steelseries Sensei if that makes any difference) either doesn't work or stops working immediately after the grub menu, prior to the login screen appearing. The cursor is present, but obviously not reactive to any mouse movement; even the LED on my mouse turns off (or fails to turn on.) The only way I've found to activate the mouse is to restart the computer, and even then it's 50/50 at best as to whether or not the mouse will be powered. This issue has never happened in Windows 7, so the mouse is operating properly on the hardware and connection side. Forgive my ignorance of Ubuntu (and Linux in general), but I was hopeful that someone would have some suggestions, or could at least instruct me on what to check in order to provide any further information for diagnoses.

  Read the article

• KVM switching from lower resolution system resets Ubuntu high resolution

  - by Ed Manet

  I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

  Read the article

• Ubuntu cant load sound cart

  - by Reza Marefaty

  I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

  Read the article

• HP va-t-il s'attaquer à Microsoft ? Le constructeur va se lancer dans le Cloud Computing où il pourrait concurrencer Windows Azure

  HP va-t-il s'attaquer à Microsoft ? Le constructeur va se lancer dans le Cloud Computing où il pourrait concurrencer Windows Azure Le PDG change, la stratégie aussi. Au temps de Mark Hurd, l'alliance entre le constructeur HP et le fournisseur d'OS Microsoft était claire. Les deux sociétés complétaient leurs offres respectives avec les atouts de l'autre. Le hardware de HP et la plateforme Azure de Microsoft formaient des appliances complètes, clef-en-main, à destination des Cloud privés et des data-centers des entreprises. C'est encore théoriquement le cas aujourd'hui. Mais depu...

  Read the article

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Network manager indicator missing

  - by Jarmo

  I recently upgraded from 11.10 to 12.04. My first attempt failed, and I received an error stating that not all of the required packages were downloaded. Before (successfully) attempting again, I noticed that there was no longer a networking indicator in the upper panel. The indicator did not reappear with the installation of 12.04. To be clear, my wireless connection has experienced no problems, despite the missing indicator. Here are the solutions that I have found which did not work for me: Editing /etc/NetworkManager/NetworkManager.conf and replacing [ifupdown] managed=false with =true. Reinstalling network-manager (via apt-get install --reinstall). I am currently running 12.04 on an Asus Eee PC 1005 HA, and I am new to seeking solutions through forums, so I apologize if I have neglected to provide some vital information about my hardware.

  Read the article

• Ubuntu 12.04 desktop crash [closed]

  - by David Mannock

  12.04 is stable under a light load, but not under intensive use of Gaussian 09 vB1. Looks like a heating issue, but psensor says that all is well on 32-cores @56C. Similar results for 64 cores. Machine shuts down after 2-3h. Syslog shows shut down. Whoopsie crash reporter sends in report. After 259 updates on the weekend, I am left wondering what the heck is wrong with this release? My answer would be "EVERYTHING!". Can someone help me do some systematic checks on this OS and hardware.

  Read the article

• Bluetooth mouse contstantly failes to reconnect after sleep

  - by Peter NUnn

  It seems the bluetooth subsystem shows some bugs after the upgrade to 13.10. It was working quite happily at 13.04. The bluetooth mouse I have, simply won't connect after the computer goes into any sort of sleep and has to be re-added each and every time. Sometimes the the entire bluetooth stack has vanished alltogether. What changed with the bluetooth between these versions, that may cause this? This is a fresh install of Kubuntu I'm using (bluedevil) no an upgrade, but the same hardware as 13.04 was happy on. I have reported this as a bug https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/124698 and added the link here as requested.

  Read the article

• inforsacom ist Oracle EMEA Database Partner of the Year – wir gratulieren!

  - by A&C Redaktion

  Der Jubel war groß auf der Oracle Open World 2012 in San Francisco: inforsacom ist EMEA Specialized Database Partner of the Year! Bei der Verleihung betonte David Callaghan, Senior Vice President EMEA A&C, die Auszeichnung gehe an die spezialisierten Partner, „die höchste Level an Innovation und Leistungsfähigkeit in ihren Spezialgebieten erzielt haben.“ Die inforsacom Informationssysteme GmbH mit Sitz in Deutschland entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Die Auszeichnung des Platinum Partners ist die Krönung einer langjährigen erfolgreichen Zusammenarbeit mit Oracle. Kunden schätzen das Unternehmen als Experten für Infrastruktur-Lösungen und -Services im Bereich Rechenzentren. Neben dem Fokus auf Oracle Datenbank-Technologien ist inforsacom auch auf das Hardware- und Engineered Systems Portofolio spezialisiert. inforsacom hat als „trusted advisor“ immer den größtmöglichen Kundennutzen im Blick – das zahlt sich aus. Herzlichen Glückwunsch! Hier ist die Pressemeldung zur Award-Verleihung und das sind die Gewinner in den sechs weiteren Kategorien: Middleware: egabi Solutions (Ägypten) Applications: Accenture (Niederlande) Industry: Mannai Trading Corporation (Katar) Oracle Accelerate for Midsize Companies: Inoapps Ltd (United Kingdom) Oracle on Oracle: Capgemini Espania, S.L. (Spanien) Server and Storage Systems: Mannai Trading Corporation (Katar)

  Read the article

• inforsacom ist Oracle EMEA Database Partner of the Year – wir gratulieren!

  - by A&C Redaktion

  Der Jubel war groß auf der Oracle Open World 2012 in San Francisco: inforsacom ist EMEA Specialized Database Partner of the Year! Bei der Verleihung betonte David Callaghan, Senior Vice President EMEA A&C, die Auszeichnung gehe an die spezialisierten Partner, „die höchste Level an Innovation und Leistungsfähigkeit in ihren Spezialgebieten erzielt haben.“ Die inforsacom Informationssysteme GmbH mit Sitz in Deutschland entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Die Auszeichnung des Platinum Partners ist die Krönung einer langjährigen erfolgreichen Zusammenarbeit mit Oracle. Kunden schätzen das Unternehmen als Experten für Infrastruktur-Lösungen und -Services im Bereich Rechenzentren. Neben dem Fokus auf Oracle Datenbank-Technologien ist inforsacom auch auf das Hardware- und Engineered Systems Portofolio spezialisiert. inforsacom hat als „trusted advisor“ immer den größtmöglichen Kundennutzen im Blick – das zahlt sich aus. Herzlichen Glückwunsch! Hier ist die Pressemeldung zur Award-Verleihung und das sind die Gewinner in den sechs weiteren Kategorien: Middleware: egabi Solutions (Ägypten) Applications: Accenture (Niederlande) Industry: Mannai Trading Corporation (Katar) Oracle Accelerate for Midsize Companies: Inoapps Ltd (United Kingdom) Oracle on Oracle: Capgemini Espania, S.L. (Spanien) Server and Storage Systems: Mannai Trading Corporation (Katar)

  Read the article

• MacBook Pro (5) touchpad stops working after upgrading from Ubuntu 10.10 to Ubuntu 11.04

  - by Rob

  After upgrading from Ubuntu 10.10 to Ubuntu 11.04, my MacBook Pro's touchpad stopped working. It works fine on the login screen, but after logging in it stops working. (Answering my own question, in the hope that it saves someone else a bit of head scratching. I'm a new user, so couldn't answer in a separate post for the next few hours). After the upgrade, your Gnome desktop configuration may have gone awry. There are a few settings which enable or disable the touchpad in certain contexts which may need tweaking to get the touchpad working again. Here's how I got mine working again: Hit Alt-F2, and run 'gconf-editor' Navigate to desktop-gnome-peripherals Ensure that peripherals-touchpad:touchpad is enabled. Ensure that peripherals-bcm5974:disable_while_other_device_exists is disabled. 'bcm5974' is probably specific to my MacBook Pro's hardware, so you may need to search around for variable disable_while_other_device_exists under the entries listed under peripherals. HTH

  Read the article

• Black screen after upgrading from 13.04 to 13.10

  - by Harri

  Just upgraded from 13.04 to 13.10 and all I got was a black screen. The hardware I'm running is Asus Zenbook UX31A (Intel GPU). I do hear that the login screen drums do play, so the system does boot to login screen. When I try to boot using kernel 3.11.0-12 recovery mode, it tells me "initctl: event failed". Then if I go on an press ctrl+alt+f2, log in and command startx, it dies because "Fatal server error: no screens found". Here are some logs from /var/log/Xorg.0.log http://pastebin.com/ZQasUKJx Kernel 3.8.0-31 work ok, as did things before the upgrade.

  Read the article

• Physics-based dynamic audio generation in games

  - by alexc

  I wonder if it is possible to generate audio dynamically without any (!) audio assets, using pure mathematics/physics and some input values like material properties and spatial distribution of content in scene space. What I have in mind is something like a scene, with concrete floor, wooden table and glass on it. Now let's assume force pushes the glass towards the edge of table and then the glass falls onto the floor and shatters. The near-realistic glass destruction itself would be possible using voxels and good physics engine, but what about the sound the glass makes while shattering? I believe there is a way to generate that sound, because physics of sound is fairly known these days, but how computationaly costy that would be? Consumer hardware or supercomputers? Do any of you know some good resources/videos of such an experiment?

  Read the article

• Embedded Spark 2010 Summer Challenge

  - by Valter Minute

  If you have a good idea for a cool embedded device based on Windows Embedded 7 and some free time to work on it you can partecipate to the Embedded Spark 2010 Summer Challenge. Just submit a short paper describing your idea and, if your idea is one of the 75 selected by the judges, you’ll receive some hardware to put your idea in practice and a chance to attend ESC Boston for free and win 15.000 dollars. The latest challenge has been won by Marco Bodoira, a fellow Italian embedded developer, so I hope to see many Italian developers (and non developers) presenting their ideas and project for this new challenge! You can find rules, ideas, forums and all the information you need at the challenge web site: http://www.embeddedspark.com/

  Read the article

• Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter  using hash tag #em12c or at Facebook . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Developing OpenGLES2 apps for Ubuntu Software Center

  - by Bram

  I have a game for iOS and Android that I now want to port to Ubuntu. I plan to distribute it with Ubuntu Software Center. Preferrably for free with an in-app-purchase. My codebase is currently based on OpenGL ES2 and written in C++. I could rewrite to OpenGL, but having progammable shaders is a must. Fixed pipeline OpenGL will not suffice. Is there a feature in place that lets you specify OpenGL requirements in the Ubuntu Software Center? I want to make sure that only Ubuntu users with compatible hardware will be able to download my game. Any APIs I could use for getting a suitable OpenGL context, or am I expected to just use glx for this? Or is the use of GTK mandatory?

  Read the article

• How do I install the Intel Graphics driver in my system?

  - by John

  Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.

  Read the article

• HP 510 laptop doesn't suspend when I close the lid

  - by Yuri

  I have an HP 510 laptop with Ubuntu 12.04. I have all the correct settings for suspending when the lid is closed, as far as I can tell, so I think it's a problem with detecting the event. The way it "should" be detected, from what I can see, is a little hardware switch that is pushed when the lid closes. This switch manually puts off the backlight, and sends the suspend signal. All I can think is that the signal isn't being properly interpreted. Can anyone suggest a fix? Update: I tested whether the button was actually working based on the suggestion by josinalvo, and I found that in the directory /proc/acpi/button/lid/ there is no LID directory. There is, however, a C1CF folder, and in it is a state file. When using the this file instead of ID, I discovered that, no, when I close the lid, the state does not change.

  Read the article

• How do I fool 12.10 to think it uses Unity2d in order to get the resolution my screen can use?

  - by Konstapel Kask

  On a laptop (model older) I have two screens (one built in, one external). I wish to use them both at the same time, but the settings app complains: Requested size (2944, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. The problem though, Unity 2D has been discontinued. I have forced Ubuntu to render Unity in 2D mode (with the help of echo export UNITY_LOW_GFX_MODE=1 >> .xprofile in accordance to this askubuntu post. But the error message still remains. How can one get the resolution that my computer supports? Or, how can I assure Ubuntu that it truly does use a 2D session?

  Read the article

• Modifying RaspberryPi as perfect linux box [on hold]

  - by Jai Hind Rubik's

  I have just bought one Raspberry pi RaspberryPi. I want to load linux kernel there. Actually my plan is to first load kernel ver sion 2.6.* after that one 3.10.* above that and in boot time I want to load 3.10.* (can choose). just after booting, I want to log in there through my windows machine using client like putty or telnet, on telnet I want see following prompt there: login as: root [email protected]'s password: ********** Last login: Thu Aug 21 22:41:07 2014 from 10.78.235.82 [root@debd ~]# [root@debd ~]#ls [root@debd ~]# Documents ... Can any one tell what kind of modification I needed to do for this? I am college student and have less knowledge managing hardware

  Read the article

• What are my tool options to prototype a 2D online multiplayer game?

  - by Asher Einhorn

  I'm looking for the best tool to allow me to quickly put together a 2D game that relies largely on networking. It's extremely likely that this game will require a server side program to constantly run. I have little experience with these things and since it's a prototype i'd like the easiest options for achieving this. I am looking to make this game for the web and mobile devices, although at present I only have access to ios hardware, (no android etc). I just want to get the bare bones of this set up so I can test it from the earliest opportunity to see if it's fun. EDIT - doesn't unity have some inbuilt networking stuff in it?

  Read the article

• ATI graphics card, with gnome shell on Ubuntu 11.10, screen flickers

  - by bioShark

  After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

  Read the article

• Crashing trying to install Ubuntu 12.04 LTS

  - by Daniel Evans

  Hardware: Dell Inspiron 1545 Steps are as follows: 1. Insert 64 bit Ubuntu 12.04 disc 2. Boot computer Output is as follows: error: unexpectedly disconnected from boot status daemon Generating locales... en_US.UTF-8... done Generation complete. MEMORY-ERROR: glib-compile-schemas[569]: GSlice: assertion failed: aligned_memory == (gpointer) addr Aborted pwconv: failed to change the mode of /etc/passwd- to 0600 MEMORY-ERROR: [996]: GSlice: assertion failed: aligned_memory == (gpointer) addr MEMORY-ERROR: glib-compile-scehmas[1034]: GSlice: assertion failed: aligned_memory == gpointer) addr Aborted /usr/lib/python2.7/dist-packages/LanguageSelector/LocaleInfo.py:256: UserWarning: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory warnings.warn(msg.args[0].encode('UTF-8')) Using CD-ROM mount point /cdrom ... etc etc... End up at a prompt line ubuntu@ubuntu:~$

  Read the article

• Can't set 1280x1024 with Nvidia Geforce 8400 GS

  - by torbengb

  I've just installed 10.04 LTS using the Windows installer. The system hangs during boot; the splash screen is frozen and it accepts neither Ctrl+Alt+F2 nor Ctrl+Alt+Del, only a hard reset. (I'm a linux noob.) When I edit the default Grub boot option to omit quiet splash, it gets to the point saying * setting sensors limit [OK] _ and there it stays. I can only get to the desktop using the Grub recovery boot option, of course with a lower resolution (800x600) but everything else seems to work fine. As I said, this is a new install. The only thing I've done is to use the Update Manager to get everything up to date, and activate the newest Nvidia driver using the "Hardware drivers" window. I had a similar problem when I installed 9.04 a year ago, and at that time posted this question with an answer that worked - this doesn't work with 10.04. Running nvidia-xconfig to create a new xorg.conf didn't fix it either (while in Recovery boot).

  Read the article

• AHCI Hotswap in Lucid Server

  - by chong

  Does Lucid support hotswapping of AHCI devices? Is there anything more to it than simply unmounting all filesystems on the drive to be disconnected and plugging in the new disk? 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) is the controller I'm working with. BIOS is set to AHCI. I also tried simply unmounting and unplugging. That seemed to work fine. Plugging in a new drive locked up the system. AHCI kernel module is also loaded. I've also looked at the Raid WIKI on kernel.org which talks about hardware requirements for AHCI HotSwapping of disks. My drives and cables all appear to meet the criteria, but most of that info pertains to the electrical side (grounding, etc...).

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >