Search Results

Search found 7131 results on 286 pages for 'auto dimmer'.

Page 166/286 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

  • Sound not working after installing PCI video card and then removing it

    - by bakhshu
    I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

    Read the article

  • Simple multi-seat

    - by Oli
    I've asked about multiseat before. The answer (for 10.04) involved doing it the proper way (eg through gdm, multiple server layouts). The problem was that gdm needs to be patched or reverted to 2.20 for multiseat. It's an ugly hack that, worse than anything, will hold up future updates. As a result, I didn't do anything. I still have a spare video card. I still have the monitor, keyboard and mouse all sitting waiting to jump into action. And I still want to be able to turn that into a simple desktop. My needs don't seem complicated. I have a second video card, a USB hub and anything connected to that USB hub that I want to be dedicated to another X server. I don't need a login screen (I'm happy hard-coding in a auto-login and I'd be happy with the user starting the X server if that's possible). This is so simple in my head that I only need two questions: How can I explicitly start an X server from the command line on an unused video adapter (by passing it whatever configuration I need to)? Can I have this new X session load a desktop environment on load? This seems like something you should be able to write in a little upstart script within 10 minutes. That would be perfect for me as then I'd have a nice start/stop control over the secondary desktop from the main desktop (that I want to leave unscathed!) I'm thinking something as simple as this for the payload: su -u other_user -c "startx -- localhost hardware-information" And use .xinitrc to load openbox or something...

    Read the article

  • Space (and pipe sign) works on occasion only

    - by Timo Riikonen
    I have an issue that when I try to write pipe sign "|" and space after that, I sometimes get wrong type of space (\240) and my command fails. This issue persists on different shells. How could I fix this? I am using Finnish keyboard layout. timo@timo-i7-ubuntu:~$ ps -ef | grep ruby timo 7169 2633 0 12:12 pts/2 00:00:00 ruby1.9.1 /usr/local/bin/rails new admin4 timo 8736 26515 0 14:22 pts/4 00:00:00 grep --color=auto ruby timo@timo-i7-ubuntu:~$ ps -ef | grep ruby No command ' grep' found, did you mean: Command 'igrep' from package 'openimageio-tools' (universe) Command 'dgrep' from package 'debian-goodies' (main) Command 'rgrep' from package 'grep' (main) Command 'zgrep' from package 'gzip' (main) Command 'zgrep' from package 'zutils' (universe) Command 'sgrep' from package 'sgrep' (universe) Command 'lgrep' from package 'lv' (universe) Command 'egrep' from package 'grep' (main) Command 'ngrep' from package 'ngrep' (universe) Command 'grep' from package 'grep' (main) Command 'agrep' from package 'agrep' (multiverse) Command 'pgrep' from package 'procps' (main) Command 'xgrep' from package 'xgrep' (universe) Command 'vgrep' from package 'atfs' (universe) Command 'fgrep' from package 'grep' (main)  grep: command not found timo@timo-i7-ubuntu:~$ cat pipecom ps -ef | grep rails timo@timo-i7-ubuntu:~$ cat pipecom2 ps -ef | grep rails timo@timo-i7-ubuntu:~$ ./pipecom timo 7169 2633 0 12:12 pts/2 00:00:00 ruby1.9.1 /usr/local/bin/rails new admin4 timo 8777 8775 0 14:26 pts/4 00:00:00 grep rails timo@timo-i7-ubuntu:~$ ./pipecom2 ./pipecom2: line 1: $'\302\240grep': command not found timo@timo-i7-ubuntu:~$ diff -w pipecom pipecom2 1c1 < ps -ef | grep rails --- > ps -ef | grep rails

    Read the article

  • Best Architecture for ASP.NET WebForms Application

    - by stack man
    I have written an ASP.NET WebForms portal for a client. The project has kind of evolved rather than being properly planned and structured from the beginning. Consequently, all the code is mashed together within the same project and without any layers. The client is now happy with the functionality, so I would like to refactor the code such that I will be confident about releasing the project. As there seems to be many differing ways to design the architecture, I would like some opinions about the best approach to take. FUNCTIONALITY The portal allows administrators to configure HTML templates. Other associated "partners" will be able to display these templates by adding IFrame code to their site. Within these templates, customers can register and purchase products. An API has been implemented using WCF allowing external companies to interface with the system also. An Admin section allows Administrators to configure various functionality and view reports for each partner. The system sends out invoices and email notifications to customers. CURRENT ARCHITECTURE It is currently using EF4 to read/write to the database. The EF objects are used directly within the aspx files. This has facilitated rapid development while I have been writing the site but it is probably unacceptable to keep it like that as it is tightly coupling the db with the UI. Specific business logic has been added to partial classes of the EF objects. QUESTIONS The goal of refactoring will be to make the site scalable, easily maintainable and secure. 1) What kind of architecture would be best for this? Please describe what should be in each layer, whether I should use DTO's / POCO / Active Record pattern etc. 2) Is there a robust way to auto-generate DTO's / BOs so that any future enhancements will be simple to implement despite the extra layers? 3) Would it be beneficial to convert the project from WebForms to MVC?

    Read the article

  • mount ext4 formated external drive->the drives green light won't stop flashing

    - by Gohlool
    I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

    Read the article

  • NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

    - by Big Daddy
    Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

    Read the article

  • Tips on how to notify a user of new features in your game

    - by brent777
    I have noticed a problem when releasing new features for a game that I wrote for Android and published on Google Play Store. Because my game is "stage-based" - and not a game like Hay Day, for example, where users will just go into the game every day since it can't really be finished - my users are not aware of new features that I release for the game. For example, if I publish a new version of my game and it contains a couple new stages, most of their devices will just auto-update the game and they don't even notice this and think to check out what's new. So this is why an approach like popping open a dialog that showcases the new feature(s) when they open the game for the first time after the update was done is not really sufficient. I am looking for some tips on an approach that will draw my users back into the game and then they could read more detail about new features on such a dialog. I was thinking of something like a notification that tells them to check out the new features after an update is done but I am not sure if this is a good idea. Any suggestions to help me solve this problem would be awesome.

    Read the article

  • VMware Kernel Module Updater hangs on Ubuntu 13.04

    VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

    Read the article

  • Why can't I run any Android NDK commands?

    - by TheBuzzSaw
    I had been running Mint 12 before, and everything was working there. I switched to Ubuntu 12.04, and now I am very frustrated. When I run ndk-build, I get /home/buzz/ndk/prebuilt/linux-x86/bin/make: not found So, I changed to that folder directly. When I type in ./make, I get bash: ./make: No such file or directory Typing ls clearly shows the file where I am! I did some hacking around (pointing to external tools) to get past each error (just to experiment), and I ran into this! /home/buzz/ndk/toolchains/arm-linux-androideabi-4.6/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc: Command not found Why? Why are all these files unable to be found? As I said above, this was all working just fine in another distro. What changed? What's extra frustrating is that if I push TAB to auto-complete, it works. So, the file is clearly there (and clearly marked with execution permissions). So, why can't it be found?

    Read the article

  • Ubuntu installed along side Win 8 but not shown in boot

    - by Mahesha999
    Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

    Read the article

  • How can I refresh/reinstall/clear/set-to-default my bootup process?

    - by Tchalvak
    I'm currently having a problem with my bootup process that is growing progressively worse as time goes on: While booting, it does a few minutes of hard-drive reading. During that, instead of showing a boot splash screen, it shows various dashes and dots, as if the video card isn't recognizing. The splash screen actually has colors similar to the splash screen (purple), it simply is garbled. It then does a few minutes of hard-drive reads, and if I leave it long enough, sometimes it boots into the desktop (and auto-logs-in). Sometimes, unfortunately, it just hangs on that garbled screen and reads from the hard-drive forever. Notably, I've also stopped being able to access grub during bootup (perhaps it is just not displayed correctly by the video, hard to tell). This is a symptom that has grown over the course of various ubuntu upgrades, at least I suspect that the upgrade process is leaving behind cruft. So, is there a safe way for me to "refresh" the boot system so that it is clean, new, fast, and reliable? For example, to test out a cleanly configured boot, make sure that it works (try before I buy), and then apply it to the system to eliminate as much of this problem as possible? Edit: Here is the requested bootchart: http://imgur.com/9jocF

    Read the article

  • Why Swipe left doesn't work? [on hold]

    - by Hitesh
    I wrote the below code to detect and perform a sprite action on the single tap and swipe right event. @Override public boolean onSceneTouchEvent(Scene pScene, TouchEvent pSceneTouchEvent) { float x = 0F; int tapCount = 0; boolean playermoving = false; // TODO Auto-generated method stub if (pSceneTouchEvent.getAction() == MotionEvent.ACTION_MOVE) { if (pSceneTouchEvent.getX() > x) { playermoving = true; players.runRight(); } if (pSceneTouchEvent.getX() < x) { Log.i("Run Left", "SPRITE Left"); } /* * if (pSceneTouchEvent.getX() < x) { System.exit(0); * Log.i("SWIPE left", "SPRITE LEFT"); } */ } if (pSceneTouchEvent.getAction() == MotionEvent.ACTION_DOWN) { playermoving = false; x = pSceneTouchEvent.getX(); tapCount++; Log.i("X CORD", String.valueOf(x)); } if (pSceneTouchEvent.isActionDown()) { if (tapCount == 1 && playermoving != true) { tapCount = 0; players.jumpRight(); } } return true; } The code works fine. The only problem is that the swipe left event is not being detected due to some reasons. What can i do to make the swipe left action work? Please help

    Read the article

  • Can't update packages or use Ubuntu Software Center (E: Some index files failed to download. They have been ignored, or old ones used instead.)

    - by user94189
    I get the following errors when trying to run the auto Update Manager Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/ppa.launchpad.net_bugs-sehe_zfs-fuse_ubuntu_dists_precise_main_binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.' When I run sudo apt-get update, I get these errors W: GPG error: http://us.archive.ubuntu.com precise Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http://ppa.launchpad.net precise Release: The following signatures were invalid: BADSIG 1FFD34C9EB13C954 Launchpad CoverGloobus W: GPG error: http://ppa.launchpad.net precise Release: The following signatures were invalid: BADSIG 4A67F94CBF965FF5 Launchpad PPA for Happy-Neko W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • Dual Monitor 'How To' for 12.04

    - by Kim Prince
    I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

    Read the article

  • One monitor getting spilled over into other monitor: how to do a 100% reset of gnome graphics configuration

    - by Paul Nathan
    I had to kill a VMWare process and afterwards, my monitor's configuration is buggy. I have 2 monitors in a side-by-side configuration. My right-hand monitor is the secondary monitor. Upon its right-hand side there are about 50 pixels showing from the left side of the lefthand monitor (ie, as if it was wrapped around). Further, my mouse clicks are registering as about 50 pixels sideways from where they should be. It's as if those 50 pixels between monitors got gobbled. What have I done? I've reset the screen configuration in multiple ways, using xrandr, multiple monitors app, etc. This persists in different side-by-side configurations, and also persists with another user. It does not occur with XFCE. Resetting the Window manager with the Compiz reset WM app does not fix this. I've concluded the burn-to-the-ground approach is likely the best, and would like to do a 100% reset of my graphics settings. It's an Intel integrated chipset. Removing ~/.config/monitors.xml did not work. Also, interestingly, the mouse can mouse-over the 50 errant pixels on the rhs of the right-hand monitor. I hypothesize that it's a compositing problem occurring at the layer where the background, selection, and clicks are caught. Also, inverting the right-hand monitor removes the issue, but renders the screen unusable. Even more datapoints: This happens in KDE as well Sometimes logging into Gnome and running xrandr --output DVI1 --auto resets it, but the issue immediately reappears when I press alt-tab. With Compiz Application Switch turned on, the workspace is 'pushed back' a bit, and the slice on the RHS follows it as well. I'm wondering if it's a flaw in the compiz workspace compositing configuration. I suspect the error was in the compositing configuration. I installed 11.10.

    Read the article

  • Architecture : am I doing things right?

    - by Jeremy D
    I'm trying to use a '~classic' layered arch using .NET and Entity Framework. We are starting from a legacy database which is a little bit crappy: Inconsistent naming Unneeded views (view referencing other views, select * views etc...) Aggregated columns Potatoes and Carrots in the same table etc... So I ended with fully isolating my database structure from my domain model. To do so EF entities are hidden from presentation layer. The goal is to permit an easier database refactoring while lowering the impact of it on applications. I'm now facing a lot of challenges and I'm starting to ask myself if I'm doing things right. My Domain Model is highly volatile, it keeps evolving with apps as new fields needs are arising. Complexity of it keeps raising and class it contains start to get a lot of properties. Creating include strategy and reprojecting to EF is very tricky (my domain objects don't have any kind of lazy/eager loading relationship properties): DomainInclude<Domain.Model.Bar>.Include("Customers").Include("Customers.Friends") // To... IFooContext.Bars.Include(...).Include(...).Where(...) Some framework are raping the isolation levels (Devexpress Grids which needs either XPO or IQueryable for filtering and paging large data sets) I'm starting to ask myself if : the isolation of EF auto-generated entities is an unneeded cost. I should allow frameworks to hit IQueryable? Slow slope to hell? (it's really hard to isolate DevExpress framework, any successful experience?) the high volatility of my domain model is normal? Did you have similar difficulties? Any advice based on experience?

    Read the article

  • What are some efficient ways to set up my environment when working on a remote site?

    - by Prefix
    Hello fellow Programmers, I am still a relatively new programmer and have recently gotten my first on-campus programming position. I am the sole dev responsible for 8 domains as well as 3 small sized PHP web apps. The campus has its web environment divided into staging and live servers -- we develop on the staging via SFTP and then push the updates to the live server through a web GUI. I use Sublime Text 2 and the Sublime SFTP plugin currently for all my dev work (its my preferred editor). If I am just making an edit to a page I'll open that individual file via the ftp browser. If I am working on the PHP web app projects, I have the app directory mapped to a local folder so that when I save locally the file is auto-uploaded through Sublime SFTP. I feel like this workflow is slow and sub-optimal. How can I improve my workflow for working with remote content? I'd love to set up a local environment on my machine as that would eliminate the constant SFTP upload/download, but as I said there are many sites and the space required for a local copy of the entire domain would be quite large and complex; not to mention keeping it updated with whatever the latest on the staging server is would be a nightmare. Anyone know how I can improve my general web dev workflow from what I've described? I'd really like to cut out constantly editing over FTP but I'm not sure where to start other than ripping the entire directory and dumping it into XAMP.

    Read the article

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • Is there a command to "manually automount" an attached disk?

    - by cheshirekow
    I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

    Read the article

  • AndEngine GLES2 - getting Black screen on emulator 4.1

    - by dizworld.com
    I'm new in andengine . I create following code public class MainActivity extends BaseGameActivity { static final int CAMERA_WIDTH = 800; static final int CAMERA_HEIGHT = 480; public Font mFont; public Camera mCamera; //A reference to the current scene public Scene mCurrentScene; public static BaseActivity instance; public EngineOptions onCreateEngineOptions() { instance = this; mCamera = new Camera(0, 0, CAMERA_WIDTH, CAMERA_HEIGHT); return new EngineOptions(true, ScreenOrientation.LANDSCAPE_SENSOR, new RatioResolutionPolicy(CAMERA_WIDTH, CAMERA_HEIGHT), mCamera); } @Override public void onCreateResources(OnCreateResourcesCallback arg0) throws Exception { mFont = FontFactory.create(this.getFontManager(),this.getTextureManager(), 256, 256,Typeface.create(Typeface.DEFAULT, Typeface.BOLD), 32); mFont.load(); } @Override public void onCreateScene(OnCreateSceneCallback arg0) throws Exception { mEngine.registerUpdateHandler(new FPSLogger()); mCurrentScene = new Scene(); Log.v("Scene","enter"); mCurrentScene.setBackground(new Background(0.09804f, 0.7274f, 0.8f)); // return mCurrentScene; } @Override public void onPopulateScene(Scene arg0, OnPopulateSceneCallback arg1) throws Exception { // TODO Auto-generated method stub } } I got code on sites there is returning scene but in AndEngine GLES2 in method onCreateScene() there is no return scene ... so my First run is BLACK .. any suggestion :)

    Read the article

  • USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

    - by Glyn Normington
    After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

    Read the article

  • Are short abbreviated method/function names that don't use full words bad practice or a matter of style?

    - by Alb
    Is there nowadays any case for brevity over clarity with method names? Tonight I came across the Python method repr() which seems like a bad name for a method to me. It's not an English word. It apparently is an abbreviation of 'representation' and even if you can deduce that, it still doesn't tell you what the method does. A good method name is subjective to a certain degree, but I had assumed that modern best practices agreed that names should be at least full words and descriptive enough to reveal enough about the method that you would easily find one when looking for it. Method names made from words help let your code read like English. repr() seems to have no advantages as a name other than being short and IDE auto-complete makes this a non-issue. An additional reason given in an answer is that python names are brief so that you can do many things on one line. Surely the better way is to just extract the many things to their own function, and repeat until lines are not too long. Are these just a hangover from the unix way of doing things? Commands with names like ls, rm, ps and du (if you could call those names) were hard to find and hard to remember. I know that the everyday usage of commands such as these is different than methods in code so the matter of whether those are bad names is a different matter.

    Read the article

  • how to setup duel monitors an xorg.conf

    - by MrMonty
    # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

    Read the article

  • Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

    - by Kristofer
    On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

    Read the article

  • Getting the total number of processors a computer has (c#)

    - by mbcrump
    Here is a code snippet for getting the total number of processors a computer has without using Environment.ProcessorCount. I found out that Environment.ProcessorCount is not necessary returning the correct value on some Intel based CPU’s.   using System; usingSystem.Collections.Generic; usingSystem.Linq; usingSystem.Text; usingSystem.Globalization; usingSystem.Runtime.InteropServices; namespaceConsoleApplication4 {     classProgram    {         static voidMain(string[] args)         {             int c = ProcessorCount;             Console.WriteLine("The computer has {0} processors", c);             Console.ReadLine();         }         private static classNativeMethods        {             [StructLayout(LayoutKind.Sequential)]             internal struct SYSTEM_INFO            {                 public ushort wProcessorArchitecture;                 public ushort wReserved;                 public uint dwPageSize;                 publicIntPtr lpMinimumApplicationAddress;                 publicIntPtr lpMaximumApplicationAddress;                 publicUIntPtr dwActiveProcessorMask;                 public uint dwNumberOfProcessors;                 public uint dwProcessorType;                 public uint dwAllocationGranularity;                 public ushort wProcessorLevel;                 public ushort wProcessorRevision;             }             [DllImport("kernel32.dll", CharSet = CharSet.Auto, ExactSpelling = true)]             internal static extern voidGetNativeSystemInfo(refSYSTEM_INFOlpSystemInfo);         }         public static int ProcessorCount         {             get            {                 NativeMethods.SYSTEM_INFOlpSystemInfo = newNativeMethods.SYSTEM_INFO();                 NativeMethods.GetNativeSystemInfo(reflpSystemInfo);                 return(int)lpSystemInfo.dwNumberOfProcessors;             }         }     } }

    Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >