Search Results

Search found 1670 results on 67 pages for 'prefix'.

Page 1/67 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• radvd is not assigning prefix

  - by Samik

  I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

  Read the article

• Zsh, directory tab-completion with prefix

  - by nifty

  I have a directory where I put all my projects in, let's say it's ~/projects as an example. I've made a command called s which takes one argument, and moves me into that directory. E.g.: s foo moves me to ~/projects/foo. What I'd like is to have a completion command of some sorts, which would act like cd so I could do keep hitting tab to go further into the ~/projects/... directories. Basically, cd with a prefix which is always present. I've looked into zstyle completion in man zshcompsys, but realized I just don't know enough about it to understand it properly.

  Read the article

• Are there real world applications where the use of prefix versus postfix operators matters?

  - by Kenneth

  In college it is taught how you can do math problems which use the ++ or -- operators on some variable referenced in the equation such that the result of the equation would yield different results if you switched the operator from postfix to prefix or vice versa. Are there any real world applications of using postfix or prefix operator where it makes a difference as to which you use? It doesn't seem to me (maybe I just don't have enough experience yet in programming) that there really is much use to having the different operators if it only applies in math equations. EDIT: Suggestions so far include: function calls //f(++x) != f(x++) loop comparison //while (++i < MAX) != while (i++ < MAX)

  Read the article

• Change namespace Prefix WCF Envelope

  - by activebiz

  I was wondering is there anyway to change the namespace prefix for the WCF SOAP request? As you can see in the example below, The Envelope has namespace "http://www.w3.org/2005/08/addressing" with prefix 'a'. I want to change this to 'foo'. How can I do that. Note I dont have control over service code I can only create proxy class from the WSDL . <s:Envelope xmlns:a="http://www.w3.org/2005/08/addressing" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"> <s:Header> <a:Action s:mustUnderstand="1">http://www.starstandards.org/webservices/2005/10/transport/operations/MyAction</a:Action> <h:payloadManifest xmlns="http://www.starstandards.org/webservices/2005/10/transport" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:h="http://www.starstandards.org/webservices/2005/10/transport"> <manifest contentID="Content0" namespaceURI="http://www.starstandard.org/STAR/5" element="TESTMETHOD" version="5.2.4"></manifest> </h:payloadManifest> <h:Identity xmlns="urn:xxx/xxx/" xmlns:h="urn:xxx/xxx"> <SiteCode>XXXXXX</SiteCode> </h:Identity> <a:To>urn:xxx/xxx/Method1</a:To> <MessageID xmlns="http://www.w3.org/2005/08/addressing">XXXXX</MessageID> <a:ReplyTo> <a:Address>http://www.w3.org/2005/08/addressing/anonymous</a:Address> </a:ReplyTo> </s:Header> Many thanks

  Read the article

• velocity: join optional fields with a separator/prefix

  - by SlowStrider

  What would be the most concise/readable way in a velocity template to join multiple fields with a separator while leaving out empty or null Strings without adding excess separators? As an example we have a tooltip or appointments that goes like: Appointment ($number) [with $employee] [-] [$remarks] [-] [$roomToVisit] Where I used brackets to indicate optional data. When filled in it would normally show as Appointment (3) with John - ballroom - serve Java coffee When $remarks is empty but $roomToVisit is not, this becomes: Appointment (3) with John - ballroom When $remarks is "serve Java coffee" but $roomToVisit is empty we get: Appointment (3) with John - serve Java coffee When both are empty: Appointment (3) with John Bonus: also make the field prefix optional. When only $employee is empty we should get: Appointment (2) serve Java coffee - ballroom Ideally I would like the velocity template to look very similar to the first code box. If this is not possible, how would you achieve this with a minimum of distracting code tags? Similar ideas (first is much more verbose): Join with intelligent separators velocity: do something except in last loop iteration

  Read the article

• Processing command-line arguments in prefix notation in Python

  - by ejm

  I'm trying to parse a command-line in Python which looks like the following: $ ./command -o option1 arg1 -o option2 arg2 arg3 In other words, the command takes an unlimited number of arguments, and each argument may optionally be preceded with an -o option, which relates specifically to that argument. I think this is called a "prefix notation". In the Bourne shell I would do something like the following: while test -n "$1" do if test "$1" = '-o' then option="$2" shift 2 fi # Work with $1 (the argument) and $option (the option) # ... shift done Looking around at the Bash tutorials, etc. this seems to be the accepted idiom, so I'm guessing Bash is optimized to work with command-line arguments this way. Trying to implement this pattern in Python, my first guess was to use pop(), as this is basically a stack operation. But I'm guessing this won't work as well on Python because the list of arguments in sys.argv is in the wrong order and would have to be processed like a queue (i.e. pop from the left). I've read that lists are not optimized for use as queues in Python. So, my ideas are: convert argv to a collections.deque and use popleft(), reverse argv using reverse() and use pop(), or maybe just work with the int list indices themselves. Does anyone know of a better way to do this, otherwise which of my ideas would be best-practise in Python?

  Read the article

• Address book Phone number (+45) prefix causing crash!

  - by CCDEV

  Hi Guys... I am having trouble getting phone numbers from the iPhone Addressbook. There is no problem when the number do not contain a country code prefix like +45, but if it does, my app crashes... Is this a known issue? I haven't been able to find anything about it... Thanks EDIT: I get phonenumber like this: -(void)getContact { ABPeoplePickerNavigationController *pp = [[ABPeoplePickerNavigationController alloc] init]; pp.displayedProperties = [NSArray arrayWithObject:[NSNumber numberWithInt:kABPersonPhoneProperty]]; pp.peoplePickerDelegate = self; [self presentModalViewController:pp animated:YES]; [pp release]; } - (void)peoplePickerNavigationControllerDidCancel:(ABPeoplePickerNavigationController *)peoplePicker { // assigning control back to the main controller [self dismissModalViewControllerAnimated:YES]; } - (BOOL)peoplePickerNavigationController:(ABPeoplePickerNavigationController *)peoplePicker shouldContinueAfterSelectingPerson:(ABRecordRef)person { return YES; } -(BOOL)peoplePickerNavigationController:(ABPeoplePickerNavigationController *)peoplePicker shouldContinueAfterSelectingPerson:(ABRecordRef)person property:(ABPropertyID)property identifier:(ABMultiValueIdentifier)identifier { ABMultiValueRef phoneProperty = ABRecordCopyValue(person,property); saveString = (NSString *)ABMultiValueCopyValueAtIndex(phoneProperty,identifier); saveString = [saveString stringByReplacingOccurrencesOfString:@" " withString:@""]; nummerTextField.text = saveString; }

  Read the article

• How to group strings by prefix

  - by namenlos

  I am writing a Winform UI in which the user must select a single customer. (For reasons beyond my control I am limited to a UI that uses dropdown lists, text fields, checkboxes, radiobuttons only -i.e. no fancy special UI controls) The situation There are a lot of customers (a thousand for example) If i put all the customers in a single dropdown there's no way it will be easy for a customer to even see all the customers. Also the it will take too long to retireve all the customers from the DB to populate the dropdown My thought is to have two combo box, the first lists groups of the customers by their last name something like a phone book "Aa-Ac", "Ad-Ade", "Adf-B", when selecting the first combo box, it scope the second one to a managable set customer names (no more than for example 40 names) The question I need a reasonable way of grouping their names such that it will be clear to customer which group contains the name. I.e. given a group of names I need to bucketize then int "Aa-Ac". Comments I don't need to solve the general problem of an immense number of names - we know based on our data that 1000 names is the max our users will encounter. If there are other techniques please do share, but I am interested specifically in an answer to my specific question around how to determine the buckets ("Aa-Ac", etc.)

  Read the article

• prefix and postfix increments while comparing variables

  - by miatech

  could someone explain why this code output is not equals not equals 2 in the first if statement it seems that a = 0 b/c is a postfix increment; therefore a will not increase untile next line; however, the two a's are not equal why? and in the second if when I run the debugger the value of a is 2, but the test is false, why? public static void main (String[] args) { int a = 0; if (a++ == a++) { System.out.println("equals"); } else { System.out.println("not equals"); } if (++a == 2) { System.out.println("equals 2"); } else { System.out.println("not equals 2"); } }

  Read the article

• freetds ./configure unrecognized option --prefix

  - by jdog

  I'm trying to compile freetds according to these instructions: http://www.mavrick.id.au/2012/php-5-3-6-mssql-freetds/ However configure is failing. My command is: ./configure --enable-msdblib -–prefix=/usr/local/freetds I'm getting configure: error: unrecognized option: `-–prefix=/usr/local/freetds' Try `./configure --help' for more information. for all command line options, even --help I have build-essentials, gcc and make installed. I also tried sudo, even though I am logged in as root. It seems to me something is still missing?

  Read the article

• Bridged VM guest does not get IPv6 prefix

  - by Arne

  I have a similar problem and setup as described in IPv6 does not work over bridge. My host get a IPv6 prefix but the guest VM only gets a local fe80-prefix. Using tcpdump I can see that solicit messages are going out from the guest but the host (ubuntu-server) doesn't seem to respond: arne@ubuntu-server:/var/log$ sudo tcpdump -i br0 host fe80::5054:00ff:fe4d:9ae0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:31:15.314419 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:15.322337 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.502374 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.743894 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit 14:31:15.802389 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:17.906580 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit I had a firewall issue which I fixed by adding the following (copied from similar IPv4 before.rules settings) to /etc/ufw/before6.rules at the end before the commit statement: # allow bridging (for KVM) -I FORWARD -m physdev --physdev-is-bridged -j ACCEPT I am running the host on a Ubuntu 14.04 server so I guess I could have used dnsmasq but I didn't find any howto for it so I used radvd (which had to be installed) with the following configuration in /etc/radvd.conf: interface br0 { AdvSendAdvert on; AdvLinkMTU 1480; prefix 2a01:79d:xxx::/64 { AdvOnLink on; AdvAutonomous on; }; }; This didn't help though so I guess I must have configured it wrong? Any help appreciated. Br, Arne PS: I wish the Ubuntu documentation included how to configure virtualization to work with IPv6

  Read the article

• Infix vs Prefix Notation - Which do you prefer?

  - by Jetti

  I have been learning Clojure and looking at Scheme and CL which introduced me to the world of prefix notation. At first I didn't like it but it is still starting to grow on me. To be honest though, there are still long calculations that are difficult for me to understand but I think that is an issue of me needing more exposure/practice and I'll get it. But that leads me to the question: Which type of notation do you prefer and why?

  Read the article

• Search for duplicate prefix of file names

  - by Mia

  I have a folder contains files name as: xxx.get.txt and xxx.resp.txt xxx.get.txt, xxx.resp.txt yyy.get.txt, yyy.resp.txt zzz.get.txt, zzz.resp.txt, etc each prefix xxx should have two corresponding files, .get.txt and .resp.txt However, now I calculate the number of .get.txt and the number of .resp.txt files, they are not equal, there're ten more .get.txt. I want to find out, which .get.txt files do not have ´.resp.txt´ file Is it possible? Many thanks!

  Read the article

• Use localeURL middleware with apache prefix

  - by Olivier R.

  Good morning everyone, I Got a question about localeURL usage. Everything works great for me with url like this : www.mysite.com/ If I type www.mysite.com/ in adress bar, it turns correctly in www.mysite.com/en/ for example. If I use the view change_locale, it's also all right (ie change www.mysite.com/en/ in www.mysite.com/fr/). But my application use apache as server, and use a prefix for the site, that gives url like this : www.mysite.com/prefix/ If I type www.mysite.com/prefix/ in the adress bar, the adress turns into www.mysite.com/en/ without prefix (so 404) I change code of view to manage our settings.SERVER_PREFIX value : def change_locale(request) : """ Redirect to a given url while changing the locale in the path The url and the locale code need to be specified in the request parameters. O. Rochaix; Taken from localeURL view, and tuned to manage : - SERVER_PREFIX from settings.py """ next = request.REQUEST.get('next', None) if not next: next = request.META.get('HTTP_REFERER', None) if not next: next = settings.SERVER_PREFIX + '/' next = urlsplit(next).path prefix = False if settings.SERVER_PREFIX!="" and next.startswith(settings.SERVER_PREFIX) : prefix = True next = "/" + next.lstrip(settings.SERVER_PREFIX) _, path = utils.strip_path (next) if request.method == 'POST': locale = request.POST.get('locale', None) if locale and check_for_language(locale): path = utils.locale_path(path, locale) if prefix : path = settings.SERVER_PREFIX + path response = http.HttpResponseRedirect(path) return response with this customized view, i'm able to correctly change language, but i'm not sure that's the right way of doing stuff. Is there any option on localeURL to manage prefix of apache ?

  Read the article

• bind tmux prefix to OS X cmd key (or any other binding)

  - by rubenfonseca

  Hi all. I'm used to iTerm2 (or Terminal.app for this case) on OS X. But I want to move to use tmux (or screen, but the problem is similar to both apps). So my idea is to have a single iTerm tab with a tmux session opened with multiple tabs. To do the transition I have a basic feature I need to configure on tmux: switch the the tab 'n' by using cmd + n (like Firefox, Chrome, iTerm2 itself, etc) However I can't find a way of mapping the cmd key on the mac keyboard. I first tried to implement cmd as a prefix key, with no success. I've tried setting set-option -g prefix M-a (hoping for Meta-a) set-option -g prefix ^a (hoping for ^ to work) but nothing works. Is this possible? I don't really need to bind the prefix to cmd, but I want to be able to change tmux tabs with cmd+n. Thank you

  Read the article

• Duplicate Prefix Error in Jsp page with Struts

  - by Cricandcric.com

  Hi, i am creating and Configuring the Struts for the first time, when I place the following Code in my jsp page <%@ taglib uri="http://struts.apache.org/tags-bean" prefix="bean"%> <%@ taglib uri="http://struts.apache.org/tags-html" prefix="html"%> <%@ taglib uri="http://struts.apache.org/tags-logic" prefix="logic"%> <%@ taglib uri="http://struts.apache.org/tags-tiles" prefix="tiles"%> I am getting the error when i move the mouse over the 1st Line "Duplicate Prefix "html" When I move the mouse over the 2nd Line, I am getting as "Duplicate Prefix "html" Similarly for 3rd and 4th Line, Can any one tell me why is this error all about Thanks in advance

  Read the article

• Using prefix incremented loops in C#

  - by KChaloux

  Back when I started programming in college, a friend encouraged me to use the prefix incrementation operator ++i instead of the postfix i++, citing that there was a slight chance of better performance with no real chance of a downside. I realize this is true in C++, and it's become a general habit that I continue to do. I'm led to believe that it makes little to no difference when used in a loop in C#, regardless of data type. Apparently the ++ operator can't be overridden. Nevertheless, I like the appearance more, and don't see a direct downside to it. It did astonish a coworker just a moment ago though, he made the (fairly logical) assumption that my loop would terminate early as a result. He's a self-taught programmer, and apparently never came across the C++ convention. That made me question whether or not the equivalent behavior of pre- and post-fix increment and decrement operators in loops is well known enough. Is it acceptable for me to continue using ++i in looping constructs because of style preference, even though it has no real performance benefit? Or is it likely to cause confusion amongst other programmers? Note: This is assuming the ++i convention is used consistently throughout all code.

  Read the article

• Java: private static boolean a,b,c,d <--each has the same prefix?

  - by HH

  Are they equivalent? private static boolean readAllFiles = false,readAllDirs = false; private static boolean readAllFiles = false; private static boolean readAllDirs = false; CASE TRUE: Have they still the same prefix with different values? private static boolean readAllFiles = false,readAllDirs = true;

  Read the article

• What does the PHP configuration option "--prefix=PREFIX" do?

  - by Xeoncross

  I have heard that setting the --prefix=PREFIX option when compiling PHP on linux will allow you to have more than one install of PHP at a time without them clashing. (I think the default if this isn't set is /usr/local). However, I'm not sure what exactly it does or what a good setting to use is. Furthermore, I've also heard that setting it to something other than the default value might make some PHP extensions harder to install. ./configure --prefix=PREFIX ...

  Read the article

• How can I use a prefix for the fields in my strongly typed View?

  - by deadtime

  Hi, I have an EditProfile action in my PersonController, that finds a Person object by ID and does return View(person). The EditProfile view has a bunch of fields that should be filled in with the information from the Person object. One of the fields is named "Person.FirstName", and is not filled in automatically when the View is rendered. However, if I rename the textbox to "FirstName", it gets filled in. My question is: How can I specify to the view that it should use the "Person" prefix when filling in the information from the Person object? The reason I want to do this is because of consistency - in some of my views I allow the user to edit more than one object at the same time, and use prefixes in order to bind these correctly.

  Read the article

• Fritz!Box IPv6-Address different than IPv6-Prefix

  - by kmindi

  In my Fritzbox it states the following: IPv6-Adresse: 2a02:8070:600::14b6:c7******, Gültigkeit: 100465/86065s IPv6-Präfix: 2a02:8070:62c:3200::/56, Gültigkeit: 100464/86064s I am not able to connect to IPv6 Addresses from computers configured by the fritzbox, because they get an address with prefix 2a02:8070:62c:3200::/56 but somehow the fritzbox does not route those addresses. Is this because the IPv6-Address is not in the prefix range? The address of the Fritzbox responds to pings, but my computers reached via various addresses from the prefix range do not (: PING 2a02:8070:62c:3200:28d****(2a02:8070:62c:3200:28d****) 32 data bytes From 2a02:8070:600:0:14b6*** icmp_seq=0 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=1 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=2 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=3 Destination unreachable: Administratively prohibited blocked ping this is "view" from outside From inside the ping6 looks like this: traceroute -6 heise.de traceroute to heise.de (2a02:2e0:3fe:100::8), 30 hops max, 80 byte packets 1 fritz.box (2a02:8070:62c:3200:****) 0.787 ms 1.424 ms 1.702 ms 2 * * * ...... 30 * * *

  Read the article

• Declraing namespace schema with prefix in XSD/XML

  - by user1493537

  I am new to XML and I have a couple of questions about prefix. I need to "add the root schema element and insert the declaration for the XML schema namespace using the xc prefix. Set the default namespace and target of the schema to the URI test.com/test1" I am doing: <xc:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://test.com/test1" targetNamespace="http://test.com/test1"> </xc:schema> Is this correct? The next one is: "insert the root schema element, declaring the XML schema namespace with the xc prefix. Declare the library namespace using the lib prefix and the contributors namespace using the cont prefix. Set the default namespace and the schema target to URI test.com/test2" The library URI is http://test.com/library and contributor URI is test.com/contributor I am doing: <xc:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:lib="http://test.com/library" xmlns:clist="http://test.com/contributor" targetNamespace="http://test.com/test2"> </xc:schema> Does this look right? I am confused with prefix and all. Thanks for the help.

  Read the article

• I18n website and URL prefix iso639

  - by trante

  I'm adding i18n to my website. For translated pages I add iso639 code of the language like this: http://example.com/en/mypage.php But I'm curious about language code. Should I use iso639-1 (en) or iso639-2 (eng) code ? http://en.wikipedia.org/wiki/ISO_639#Relations_between_the_parts When I check, I see that most of the websites including Wikipedia, uses 2 character language code ? What is the standart or most widely used option for language codes ?

  Read the article

• Sql Server Management Studio: Change Prefix or Suffix characters

  - by PhantomDrummer

  I have an instance of SSMS 2008, for which the option to edit data in a table doesn't work. If I right-click on any table in the Object Explorer and select 'Edit top 200 rows' I get an error dialog 'Invalid prefix or suffix characters. (MS Visual Database Tools)'. The error seems to be associated specifically with SSMS, not with SQL Server (because this SSMS instance gives the same error no matter what database I connect to, but I've verified I can connect to some of the same databases using SSMS on other machines without the error). (However, our firewall prevents me using SSMS on other machines for some crucial tasks, so I do need to fix the problem). Googling for the error suggests that I should change the prefix, suffix or escape character, but without any indication of how you can make that change in SSMS. I'd also note that I'm not aware of having done any customization on SSMS since installing it, so would be surprised at having to make such a change now. Does anyone have any idea what the error message means or what I can do about it? Or how I can change the prefix/suffix/escape characters if that is really the problem.

  Read the article

• mysqldump table names prefix

  - by Bogdan Gusiev

  I have two mysql databases that have almost the same structure and representing the data of the same web app but one of them represents the current version and second one was made long time ago. How can I create the database with both dumps inside but with old_ prefix for tables from the first and new_ prefix for tables from the second database? Is there any mysqldump options to setup the prefix or other solution?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >