Search Results

Search found 4893 results on 196 pages for 'expect'.

Page 168/196 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • Linux software RAID6: 3 drives offline - how to force online?

    - by Ole Tange
    This is similar to 3 drives fell out of Raid6 mdadm - rebuilding? except that it is not due to a failing cable. Instead the 3rd drive fell offline during rebuild of another drive. The drive failed with: kernel: end_request: I/O error, dev sdc, sector 293732432 kernel: md/raid:md0: read error not correctable (sector 293734224 on sdc). After rebooting both these sectors and the sectors around them are fine. This leads me to believe the error is intermittent and thus the device simply took too long to error correct the sector and remap it. I expect that no data was written to the RAID after it failed. Therefore I hope that if I can kick the last failing device online that the RAID is fine and that the xfs_filesystem is OK, maybe with a few missing recent files. Taking a backup of the disks in the RAID takes 24 hours, so I would prefer that the solution works the first time. I have therefore set up a test scenario: export PRE=3 parallel dd if=/dev/zero of=/tmp/raid${PRE}{} bs=1k count=1000k ::: 1 2 3 4 5 parallel mknod /dev/loop${PRE}{} b 7 ${PRE}{} \; losetup /dev/loop${PRE}{} /tmp/raid${PRE}{} ::: 1 2 3 4 5 mdadm --create /dev/md$PRE -c 4096 --level=6 --raid-devices=5 /dev/loop${PRE}[12345] cat /proc/mdstat mkfs.xfs -f /dev/md$PRE mkdir -p /mnt/disk2 umount -l /mnt/disk2 mount /dev/md$PRE /mnt/disk2 seq 1000 | parallel -j1 mkdir -p /mnt/disk2/{}\;cp /bin/* /mnt/disk2/{}\;sleep 0.5 & mdadm --fail /dev/md$PRE /dev/loop${PRE}3 /dev/loop${PRE}4 cat /proc/mdstat # Assume reboot so no process is using the dir kill %1; sync & kill %1; sync & # Force fail one too many mdadm --fail /dev/md$PRE /dev/loop${PRE}1 parallel --tag -k mdadm -E ::: /dev/loop${PRE}? | grep Upda # loop 2,5 are newest. loop1 almost newest => force add loop1 Next step is to add loop1 back - and this is where I am stuck. After that do a xfs-consistency check. When that works, check that the solution also works on real devices (such a 4 USB sticks).

    Read the article

  • How do I configure Reverse Group Membership Maintenance on an openldap server? (memberOf)

    - by emills
    I am currently working on integrating LDAP authentication into a system and I would like to restrict access based on LDAP group. The only way to do this is via a search filter and therefore I believe my only option to be the use of the "memberOf" attribute in my search filter. It is my understanding that the "memberOf" attribute is an operational attribute which can be created by the server for me anytime a new "member" attribute is created for any "groupOfNames" entry on the server. My main goal is to be able to add a "member" attribute to an existing "groupOfNames" entry and have a matching "memberOf" attribute be added to the DN I provide. What I have managed to achieve so far: I'm still pretty new to LDAP administration but based on what I found in the openldap admin's guide, it looks like Reverse Group Membership Maintence aka "memberof overlay" would achieve exactly the effect I am looking for. My server is currently running a package installation (slapd on ubuntu) of openldap 2.4.15 which uses "cn=config" style runtime configuration. Most of the examples I have found still reference the older "slapd.conf" method of static configuration and I have tried my best to adapt the configurations to the new directory based model. I have added the following entries to enable the memberof overlay module: Enable the module with olcModuleLoad cn=config/cn\=module\{0\}.ldif dn: cn=module{0} objectClass: olcModuleList cn: module{0} olcModulePath: /usr/lib/ldap olcModuleLoad: {0}back_hdb olcModuleLoad: {1}memberof.la structuralObjectClass: olcModuleList entryUUID: a410ce98-3fdf-102e-82cf-59ccb6b4d60d creatorsName: cn=config createTimestamp: 20090927183056Z entryCSN: 20091009174548.503911Z#000000#000#000000 modifiersName: cn=admin,cn=config modifyTimestamp: 20091009174548Z Enabled the overlay for the database and allowed it to use it's default settings (groupOfNames,member,memberOf,etc) cn=config/olcDatabase={1}hdb/olcOverlay\=\{0\}memberof dn: olcOverlay={0}memberof objectClass: olcMemberOf objectClass: olcOverlayConfig objectClass: olcConfig objectClass: top olcOverlay: {0}memberof structuralObjectClass: olcMemberOf entryUUID: 6d599084-490c-102e-80f6-f1a5d50be388 creatorsName: cn=admin,cn=config createTimestamp: 20091009104412Z olcMemberOfRefInt: TRUE entryCSN: 20091009173500.139380Z#000000#000#000000 modifiersName: cn=admin,cn=config modifyTimestamp: 20091009173500Z My current result: By using the above configuration, I am able to add a NEW "groupOfNames" with any number of "member" entries and have all the involved DNs updated with a "memberOf" attribute. This is part of the behavior I would expect. While I believe the following should have been accomplished with the memberof overlay, I still do not know how to do the following and I would gladly welcome any advice: Add a "member" attribute to an EXISTING "groupOfNames" and have a corresponding "memberOf" attribute be created automatically. Remove a "member" attribute and have the corresponding "memberOf" attribute" be removed automatically.

    Read the article

  • mod_rewrite all but two files causing loop

    - by mpounsett
    I'm trying to set up a web site to allow the creation of a semaphore file to close the site. The logic I want to follow is: when the semaphore file exists and the request is not for /style.css or /favicon.icon show the content of /closed.html I have 1 and 3 working, but my exceptions for 2 result in a processing loop when style.css or favicon.ico are requested. This is my most recent attempt: RewriteEngine on RewriteCond %{REQUEST_URI} !^/style.css RewriteCond %{REQUEST_URI} !^/favicon.ico RewriteCond /usr/local/etc/site/closed -f RewriteRule ^.*$ /closed.html [L] This is in a VirtualHost block, not in a Directory. There is no .htaccess file in play. I have also recently tried this, based on an answer I found elsewhere, but with the same (looping) result: RewriteCond %{REQUEST_URI} ^/style.css [OR] RewriteCond %{REQUEST_URI} ^/favicon.ico RewriteRule ^.*$ - [L] RewriteCond /usr/local/etc/site/closed -f RewriteRule ^.*$ /closed.html [L] I expect a request for /style.css or /favicon.ico to fail to match one of the first two rewrite conditions, which should prevent the URI from being rewritten, which should stop the mod_rewrite iteration. However, mod_rewrite seems to think the URI has been rewritten in those cases, and iterates over the rules again (and again, and again). The above works properly in all cases except for style.css or favicon.ico. In those cases I exceed the loop limits. What am I missing here to cause the rewrite iteration to stop when someone requests style.css or favicon.ico? EDIT: Here's a loglevel 9 example of what happens using the first ruleset when a request arrives for /style.css. This is just the first two iterations.. it continues to loop identically until the limit is reached. 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1db0a0/initial] (2) init rewrite engine with requested uri /style.css 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1db0a0/initial] (3) applying pattern '^.*$' to uri '/style.css' 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1db0a0/initial] (4) RewriteCond: input='/style.css' pattern='!^/style.css' => not-matched 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1db0a0/initial] (1) pass through /style.css 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1dd0a0/initial] (2) init rewrite engine with requested uri /style.css 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1dd0a0/initial] (3) applying pattern '^.*$' to uri '/style.css' 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1dd0a0/initial] (4) RewriteCond: input='/style.css' pattern='!^/style.css' => not-matched 2001:4900:1044:0:145f:826e:6436:dc1 - - [29/May/2014:15:29:26 +0000] [host.example/sid#80c1c48b0][rid#80c1dd0a0/initial] (1) pass through /style.css

    Read the article

  • Windows 7 startup MUCH slower after reinstall (on an SSD)

    - by user326639
    I installed Windows 7 Prof 64 bits OEM (Spanish) on my new machine. As I wanted my Windows to be in English, the web shop where I bought the DVD recomended me to download an ISO file with the same Windows version (but in English), burn it on a DVD and install it. And that I should be able to use my registration code. Location ISO: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65805/X15-65805.iso I've done this and everything works (I have not activated my Windows yet but I expect no problem there). Just one thing: its startup is MUCH slower now! Have a look at my PC specs (bottom). On my first install (Spanish), it was like: - motherboard splash screen -- shows for a second or two - list of found drives -- a few seconds - the text "Windows starting" -- about a second before the dots appear - four collored dots form the Windows logo -- a few seconds after the logo is fully formed it moves on to the login screen. On my second install (English): - motherboard splash screen -- shows for 15 seconds - list of found drives -- a few seconds - the text "Windows starting" -- shows for 40 seconds before the dots appear - four collored dots form the Windows logo -- now it moves on to the login screen about equally fast as before. Ones it's up and running it seems to be as responsive as before, although it's possible that I'm not noticing the difference. I did the first install on the virgin SSD drive straight from the box. The second time I let the Windows installation program format the drive first to get rid of the old installation. I noticed that there were two partitions on my SSD: partition 1, 100 Mb, "reserved for the system" and partition 2, 111.7 Gb. I only formated the big partition, and I left the system partition untouched. Between the two installs, I didn't open the computer so everything is connected to the same port. I did not change anything in BIOS. Has Windows not recognized my SSD as an SSD but as a normal HDD. I suspect that Windows has not done the neccesary automatic configuration settings that it should do for SSD's (but that's just a hunch). How do I get my SSD back into its virgin state, as if it came right from the box, so I can go for a 3rd attempt to install windows. Should I use DISKPART? Other ideas are welcome. Specifications: mobo: Gigabyte GA-Z68X-UD3H-B3 CPU: i7-2600K SSD: OCZ Agility3 2,5" HDD: Samsung Spinpoint F4 mem: Kingston HyperX DIMM 8 Gb DDR3-1600

    Read the article

  • Windows Update and IE fail to connect, but Chrome fine?

    - by I Gottlieb
    Out of ideas on this one. (Running Windows Vista.) I have a program that accesses the internet to retrieve financial market data. One day it tells me that it can't log in -- timeout error. I check the documentation and it says must have a working copy of IE browser installed. I check IE (have IE9) and sure enough -- it just spins. No error message, not timeout, no 'try later' -- just spins -- as far as I can tell, indefinitely. Any page, any address. Even access to a localhost site just spins. Chrome works fine. So does another program I have that fetches market data. Windows 'diagnose and repair' says my internet connection is working fine. I tried uninstall/re-install of IE. Same spinning. I tried to install Windows Updates, and guess what? I can't. I comes up with error 80072efd; checked documentation for the error and it says I should check firewall blockage. Thing is, the only firewall I have is Windows Firewall, and obviously it wouldn't be blocking Windows Update. In contrast, Windows 'Help' in all programs has no problem accessing the Internet. I had a filter on the internet connection, and this was updated just prior to first appearance of the problem. But I uninstalled the filter entirely (official, with passwd from the company's service rep) -- and no difference. I'm guessing that a high level Windows network service file is corrupted -- used only by MS programs and their ilk, but how do I find it? I'd like to avoid having to do a clean install of Windows. Much obliged for any insight. IG Ramhound -- Thanks for reply. I'm familiar with virtual machines as in e.g. JVM or an emulator for an alternative architecture or (theoretical) Turing Machine equivalence. But I'm not familiar with the way you're using the term. Please clarify -- what one needs for this VM 'test' and why you expect it will provide an advantage of insight into the problem. And what sort of 'configuration issue' are you referring to? IG

    Read the article

  • TFS 2010 SDK: Connecting to TFS 2010 Programmatically&ndash;Part 1

    - by Tarun Arora
    Technorati Tags: Team Foundation Server 2010,TFS 2010 SDK,TFS API,TFS Programming,TFS ALM   Download Working Demo Great! You have reached that point where you would like to extend TFS 2010. The first step is to connect to TFS programmatically. 1. Download TFS 2010 SDK => http://visualstudiogallery.msdn.microsoft.com/25622469-19d8-4959-8e5c-4025d1c9183d?SRC=VSIDE 2. Alternatively you can also download this from the visual studio extension manager 3. Create a new Windows Forms Application project and add reference to TFS Common and client dlls Note - If Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.Common do not appear on the .NET tab of the References dialog box, use the Browse tab to add the assemblies. You can find them at %ProgramFiles%\Microsoft Visual Studio 10.0\Common7\IDE\ReferenceAssemblies\v2.0. using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common;   4. There are several ways to connect to TFS, the two classes of interest are, Option 1 – Class – TfsTeamProjectCollectionClass namespace Microsoft.TeamFoundation.Client { public class TfsTeamProjectCollection : TfsConnection { public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection); public TfsTeamProjectCollection(Uri uri); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials); public TfsTeamProjectCollection(Uri uri, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public TfsConfigurationServer ConfigurationServer { get; internal set; } public override string Name { get; } public static Uri GetFullyQualifiedUriForName(string name); protected override object GetServiceInstance(Type serviceType, object serviceInstance); protected override object InitializeTeamFoundationObject(string fullName, object instance); } } Option 2 – Class – TfsConfigurationServer namespace Microsoft.TeamFoundation.Client { public class TfsConfigurationServer : TfsConnection { public TfsConfigurationServer(RegisteredConfigurationServer application); public TfsConfigurationServer(Uri uri); public TfsConfigurationServer(RegisteredConfigurationServer application, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials); public TfsConfigurationServer(Uri uri, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public override string Name { get; } protected override object GetServiceInstance(Type serviceType, object serviceInstance); public TfsTeamProjectCollection GetTeamProjectCollection(Guid collectionId); protected override object InitializeTeamFoundationObject(string fullName, object instance); } }   Note – The TeamFoundationServer class is obsolete. Use the TfsTeamProjectCollection or TfsConfigurationServer classes to talk to a 2010 Team Foundation Server. In order to talk to a 2005 or 2008 Team Foundation Server use the TfsTeamProjectCollection class. 5. Sample code for programmatically connecting to TFS 2010 using the TFS 2010 API How do i know what the URI of my TFS server is, Note – You need to be have Team Project Collection view details permission in order to connect, expect to receive an authorization failure message if you do not have sufficient permissions. Case 1: Connect by Uri string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); Case 2: Connect by Uri, prompt for credentials string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), new UICredentialsProvider()); configurationServer.EnsureAuthenticated(); Case 3: Connect by Uri, custom credentials In order to use this method of connectivity you need to implement the interface ICredentailsProvider public class ConnectByImplementingCredentialsProvider : ICredentialsProvider { public ICredentials GetCredentials(Uri uri, ICredentials iCredentials) { return new NetworkCredential("UserName", "Password", "Domain"); } public void NotifyCredentialsAuthenticated(Uri uri) { throw new ApplicationException("Unable to authenticate"); } } And now consume the implementation of the interface, string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; ConnectByImplementingCredentialsProvider connect = new ConnectByImplementingCredentialsProvider(); ICredentials iCred = new NetworkCredential("UserName", "Password", "Domain"); connect.GetCredentials(new Uri(_myUri), iCred); TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), connect); configurationServer.EnsureAuthenticated();   6. Programmatically query TFS 2010 using the TFS SDK for all Team Project Collections and retrieve all Team Projects and output the display name and description of each team project. CatalogNode catalogNode = configurationServer.CatalogNode; ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( new Guid[] { CatalogResourceTypes.ProjectCollection }, false, CatalogQueryOptions.None); // tpc = Team Project Collection foreach (CatalogNode tpcNode in tpcNodes) { Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' var tpNodes = tpcNode.QueryChildren( new Guid[] { CatalogResourceTypes.TeamProject }, false, CatalogQueryOptions.None); foreach (var p in tpNodes) { Debug.Write(Environment.NewLine + " Team Project : " + p.Resource.DisplayName + " - " + p.Resource.Description + Environment.NewLine); } }   Output   You can download a working demo that uses TFS SDK 2010 to programmatically connect to TFS 2010. Screen Shots of the attached demo application, Share this post :

    Read the article

  • SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010

    - by pinaldave
    We recently had one of the best community events in Ahmedabad. We were fortunate that we had SQL Experts from around the world to have presented at this event. This gathering was very special because besides Jacob Sebastian and myself, we had two other speakers traveling all the way from Florida (Rushabh Mehta) and Bangalore (Vinod Kumar).There were a total of nearly 170 attendees and the event was blast. Here are the details of the event. Pinal Dave Presenting at Community Tech Days On the day of the event, it seemed to be the coldest day in Ahmedabad but I was glad to see hundreds of people waiting for the doors to be opened some hours before. We started the day with hot coffee and cookies. Yes, food first; and it was right after my keynote. I could clearly see that the coffee did some magic right away; the hall was almost full after the coffee break. Jacob Sebastian Presenting at Community Tech Days Jacob Sebastian, an SQL Server MVP and a close friend of mine, had an unusual job of surprising everybody with an innovative topic accompanied with lots of question-and-answer portions. That’s definitely one thing to love Jacob, that is, the novelty of the subject. His presentation was entitled “Best Database Practices for the .Net”; it really created magic on the crowd. Pinal Dave Presenting at Community Tech Days Next to Jacob Sebastian, I presented “Best Database Practices for the SharePoint”. It was really fun to present Database with the perspective of the database itself. The main highlight of my presentation was when I talked about how one can speed up the database performance by 40% for SharePoint in just 40 seconds. It was fun because the most important thing was to convince people to use the recommendation as soon as they walk out of the session. It was really amusing and the response of the participants was remarkable. Pinal Dave Presenting at Community Tech Days My session was followed by the most-awaited session of the day: that of Rushabh Mehta. He is an international BI expert who traveled all the way from Florida to present “Self Service BI” session. This session was funny and truly interesting. In fact, no one knew BI could be this much entertaining and fascinating. Rushabh has an appealing style of presenting the session; he instantly got very much interaction from the audience. Rushabh Mehta Presenting at Community Tech Days We had a networking lunch break in-between, when we talked about many various topics. It is always interesting to get in touch with the Community and feel a part of it. I had a wonderful time during the break. Vinod Kumar Presenting at Community Tech Days After lunch was apparently the most difficult session for the presenter as during this time, many people started to fall sleep and get dizzy. This spot was requested by Microsoft SQL Server Evangelist Vinod Kumar himself. During our discussion he suggested that if he gets this slot he would make sure people are up and more interactive than during the morning session. Just like always, this session was one of the best sessions ever. Vinod is true to his word as he presented the subject of “Time Management for Developer”. This session was the biggest hit in the event because the subject was instilled in the mind of every participant. Vinod Kumar Presenting at Community Tech Days Vinod’s session was followed by his own small session. Due to “insistent public demand”, he presented an interesting subject, “Tricks and Tips of SQL Server“. In 20 minutes he has done another awesome job and all attendees wanted more of the tricks. Just as usual he promised to do that next time for us. Vinod’s session was succeeded by Prabhjot Singh Bakshi’s session. He presented an appealing Silverlight concept. Just the same, he did a great job and people cheered him. Prabhjot Presenting at Community Tech Days We had a special invited speaker, Dhananjay Kumar, traveling all the way from Pune. He always supports our cause to help the Community in empowering participants. He presented the topic about Win7 Mobile and SharePoint integration. This was something many did not even expect to be possible. Kudos to Dhananjay for doing a great job. Dhananjay Kumar Presenting at Community Tech Days All in all, this event was one of the best in the Community Tech Days series in Ahmedabad. We were fortunate that legends from the all over the world were present here to present to the Community. I’d say never underestimate the power of the Community and its influence over the direction of the technology. Vinod Kumar Presenting trophy to Pinal Dave Vinod Kumar Presenting trophy to Pinal Dave This event was a very special gathering to me personally because of your support to the vibrant Community. The following awards were won for last year’s performance: Ahmedabad SQL Server User Group (President: Jacob Sebastian; Leader: Pinal Dave) – Best Tier 2 User Group Best Development Community Individual Contributor – Pinal Dave Speakers I was very glad to receive the award for our entire Community. Attendees at Community Tech Days I want to say thanks to Rushabh Mehta, Vinod Kumar and Dhananjay Kumar for visiting the city and presenting various technology topics in Community Tech Days. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

  • The Challenge with HTML5 – In Pictures

    - by dwahlin
    I love working with Web technologies and am looking forward to the new functionality that HTML5 will ultimately bring to the table (some of which can be used today). Having been through the div versus layer battle back in the IE4 and Netscape 4 days I think we’re headed down that road again as a result of browsers implementing features differently. I’ve been spending a lot of time researching and playing around with HTML5 samples and features (mainly because we’re already seeing demand for training on HTML5) and there’s a lot of great stuff there that will truly revolutionize web applications as we know them. However, browsers just aren’t there yet and many people outside of the development world don’t really feel a need to upgrade their browser if it’s working reasonably well (Mom and Dad come to mind) so it’s going to be awhile. There’s a nice test site at http://www.HTML5Test.com that runs through different HTML5 features and scores how well they’re supported. They don’t test for everything and are very clear about that on the site: “The HTML5 test score is only an indication of how well your browser supports the upcoming HTML5 standard and related specifications. It does not try to test all of the new features offered by HTML5, nor does it try to test the functionality of each feature it does detect. Despite these shortcomings we hope that by quantifying the level of support users and web developers will get an idea of how hard the browser manufacturers work on improving their browsers and the web as a development platform. The score is calculated by testing for the many new features of HTML5. Each feature is worth one or more points. Apart from the main HTML5 specification and other specifications created the W3C HTML Working Group, this test also awards points for supporting related drafts and specifications. Some of these specifications were initially part of HTML5, but are now further developed by other W3C working groups. WebGL is also part of this test despite not being developed by the W3C, because it extends the HTML5 canvas element with a 3d context. The test also awards bonus points for supporting audio and video codecs and supporting SVG or MathML embedding in a plain HTML document. These test do not count towards the total score because HTML5 does not specify any required audio or video codec. Also SVG and MathML are not required by HTML5, the specification only specifies rules for how such content should be embedded inside a plain HTML file. Please be aware that the specifications that are being tested are still in development and could change before receiving an official status. In the future new tests will be added for the pieces of the specification that are currently still missing. The maximum number of points that can be scored is 300 at this moment, but this is a moving goalpost.” It looks like their tests haven’t been updated since June, but the numbers are pretty scary as a developer because it means I’m going to have to do a lot of browser sniffing before assuming a particular feature is available to use. Not that much different from what we do today as far as browser sniffing you say? I’d have to disagree since HTML5 takes it to a whole new level. In today’s world we have script libraries such as jQuery (my personal favorite), Prototype, script.aculo.us, YUI Library, MooTools, etc. that handle the heavy lifting for us. Until those libraries handle all of the key HTML5 features available it’s going to be a challenge. Certain features such as Canvas are supported fairly well across most of the major browsers while other features such as audio and video are hit or miss depending upon what codec you want to use. Run the tests yourself to see what passes and what fails for different browsers. You can also view the HTML5 Test Suite Conformance Results at http://test.w3.org/html/tests/reporting/report.htm (a work in progress). The table below lists the scores that the HTML5Test site returned for different browsers I have installed on my desktop PC and laptop. A specific list of tests run and features supported are given when you go to the site. Note that I went ahead and tested the IE9 beta and it didn’t do nearly as good as I expected it would, but it’s not officially out yet so I expect that number will change a lot. Am I opposed to HTML5 as a result of these tests? Of course not - I’m actually really excited about what it offers.  However, I’m trying to be realistic and feel it'll definitely add a new level of headache to the Web application development process having been through something like this many years ago. On the flipside, developers that are able to target a specific browser (typically Intranet apps) or master the cross-browser issues are going to release some pretty sweet applications. Check out http://html5gallery.com/ for a look at some of the more cutting-edge sites out there that use HTML5. Also check out the http://www.beautyoftheweb.com site that Microsoft put together to showcase IE9. Chrome 8 Safari 5 for Windows     Opera 10 Firefox 3.6     Internet Explorer 9 Beta (Note that it’s still beta) Internet Explorer 8

    Read the article

  • Entity Framework 4.0: Creating objects of correct type when using lazy loading

    - by DigiMortal
    In my posting about Entity Framework 4.0 and POCOs I introduced lazy loading in EF applications. EF uses proxy classes for lazy loading and this means we have new types in that come and go dynamically in runtime. We don’t have these types available when we write code but we cannot forget that EF may expect us to use dynamically generated types. In this posting I will give you simple hint how to use correct types in your code. The background of lazy loading and proxy classes As a first thing I will explain you in short what is proxy class. Business classes when designed correctly have no knowledge about their birth and death – they don’t know how they are created and they don’t know how their data is persisted. This is the responsibility of object runtime. When we use lazy loading we need a little bit different classes that know how to load data for properties when code accesses the property first time. As we cannot add this functionality to our business classes (they may be stored through more than one data access technology or by more than one Data Access Layer (DAL)) we create proxy classes that extend our business classes. If we have class called Product and product has lazy loaded property called Customer then we need proxy class, let’s say ProductProxy, that has same public signature as Product so we can use it INSTEAD OF product in our code. ProductProxy overrides Customer property. If customer is not asked then customer is null. But if we ask for Customer property then overridden property of ProductProxy loads it from database. This is how lazy loading works. Problem – two types for same thing As lazy loading may introduce dynamically generated proxy types we don’t know in our application code which type is returned. We cannot be sure that we have Product not ProductProxy returned. This leads us to the following question: how can we create Product of correct type if we don’t know the correct type? In EF solution is simple. Solution – use factory methods If you are using repositories and you are not using factories (imho it is pretty pointless with mapper) you can add factory methods to your EF based repositories. Take a look at this class. public class Event {     public int ID { get; set; }     public string Title { get; set; }     public string Location { get; set; }     public virtual Party Organizer { get; set; }     public DateTime Date { get; set; } } We have virtual member called Organizer. This property is virtual because we want to use lazy loading on this class so Organizer is loaded only when we ask it. EF provides us with method called CreateObject<T>(). CreateObject<T>() is member of ObjectContext class and it creates the object based on given type. In runtime proxy type for Event is created for us automatically and when we call CreateObject<T>() for Event it returns as object of Event proxy type. The factory method for events repository is as follows. public Event CreateEvent() {     var evt = _context.CreateObject<Event>();     return evt; } And we are done. Instead of creating factory classes we created factory methods that guarantee that created objects are of correct type. Conclusion Although lazy loading introduces some new objects we cannot use at design time because they live only in runtime we can write code without worrying about exact implementation type of object. This holds true until we have clean code and we don’t make any decisions based on object type. EF4.0 provides us with very simple factory method that create and return objects of correct type. All we had to do was adding factory methods to our repositories.

    Read the article

  • Convert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1

    - by DigitalGeekery
    Today look at MCEBuddy for Windows 7 Media Center. This handy app automatically takes your recorded TV files and converts them to MP4, AVI, WMV, or MPEG format. It even has the option to cut out those annoying commercials during the conversion process. Installation and Configuration Download and extract MCE Buddy. (Download link below) Run the setup.exe file and take all the default settings.   Open MCEBuddy Configuration by going to Start > All Programs > MCEBuddy > MCEBuddy Configuration.   Video Paths The MCEBuddy application is comprised of a single window. The first step you’ll want to take is to define your Source and Destination paths. The “Source” will most likely be your Recorded TV directory. The Destination should NOT be the same as the Source folder. Note: The Recorded TV directory in Windows 7 Media Center will only display and play WTV & DVR-MS files. To watch the converted MP4, AVI, WMV, or MPEG files in Windows Media Center you’ll need to add them to your Video Library or Movie Library. Video Conversion Next, choose your preferred format for conversion from the “Convert to” drop down list. The default is MP4 with the H.264 codec. You’ll find a wide variety of formats. The first set of conversion options in the drop down list will resize the video to 720 pixels wide. The next two sections maintain the original size, and the final section is for a variety of portable devices.   Next, you’ll see a group of check boxes below the “Convert to” drop down list. The Commercial Skipping option will cut the commercials while converting the file. Sort By Series will create a sub-folder in your Destination folder for each TV show. Delete Original will delete the WTV file after conversion is complete. (This option is not recommended unless you are sure your files are converting properly and you no longer need the WTV file.) Start Minimized is ideal if you want to run MCEBuddy on Windows startup. Note: MCEBuddy installs and uses Comskip for commercial cutting by default. However, if you have ShowAnalyzer installed, it will use that application instead. Advanced Options To choose a specific time of day to perform the conversions, click the checkbox under the “Advanced Options,” and select the starting and ending times for conversion. For example, convert between 2 hours and 5 hours would be between 2 am and 5am. If you want MCEBuddy to constantly look for and immediately convert new recordings, leave the box unchecked.   The “Video age” option lets you choose a specific number of days to wait before performing the conversion. This can be useful if you want to watch the recordings first and delete those you don’t wish to convert. You can also choose the “Sub Directories” if you’d like MCEBuddy to convert files that are in a sub-folder in your “Source” directory. Second Conversion As you might expect, this option allows MCEBuddy to perform a second conversion of your file. This can be useful if you want to use your first conversion to create a higher quality MP4 or AVI file for playback on a larger screen, and a second one for a portable device such as Zune or iPhone. The same options from the first conversion are also available for the second. You’ll want to choose a separate Destination folder for the second conversion.   Start and Monitor Progress To start converting your video files, simply press the “Start” button at the bottom. You’ll be able to follow the progress in the “Current Activity” section. When all the video files have finished converting, or there are no current files to convert, MCEBuddy will display a “Started – Idle” status. Click “Stop” if you don’t want MCEBuddy to continue scanning for new files.   Conclusion MCEBuddy 1.1 will convert all WTV files in it’s source folder. If you want to pick and choose which recordings to convert, you may want to define a source folder different than the Recorded TV folder and then just copy or move the files you wish to convert into the new source folder. The conversion process does take a good bit of time. If you choose the commercial skipping and second conversion options it can take several hours to fully convert one TV recording. Overall, MCEBuddy makes a nice Media Center addition for those that want to save some space with smaller size files, convert Recorded TV files for their portable device, or automatically remove commercials. If you’re looking for a different method to skip commercials check out our post on how to skip commercials in Windows 7 Media Center. Download MCEBuddy 1.1 Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Skip Commercials in Windows 7 Media CenterHow To Convert Video Files to MP3 with VLCStartup Customizations for Media Center in Windows 7Add Folders to the Movie Library in Windows 7 Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

    Read the article

  • SQL Developer Blitz at ODTUG Kscope12

    - by thatjeffsmith
    Oracle Development Tools User Group (ODTUG) puts on an outstanding event, and I enjoy that the content comes FIRST. Yes, the after-event parties and entertainment are first class, but I look forward most to sitting in on some excellent sessions. For Kscope12 one would expect Oracle to have a large presence, and you would be absolutely correct! The APEX team will be there in full force, and we’ll have sessions on JDeveloper, ADF, and .NET. But what I want to talk about today is our awesome line-up of coverage for Oracle SQL Developer (Surprise!) DB and Developer’s Toolbox Symposium Kris Rice or @krisrice, Product Development Manager for SQL Developer, will speak at 10AM Sunday about SQL Developer Data Modeler. Our free data modeling solution allows one to reverse engineer a data dictionary to a model, modify it, and create a script of the changes. Collaboration is an important part of any development team; with built-in subversion support, the modeler makes collaboration easy, not just possible. After the morning break, I’ll be talking about SQL Developer’s PL/SQL support. From creating your code, to debugging, tuning, testing, and documenting PL/SQL – SQL Developer fits the bill. Since I have a full hour, I should have time to do a little riff on using source control to version and manage your revisions too! At 3:15 Jagan Athreya will talk about the new integration between SQL Developer and Enterprise Manager Cloud Control 12c. Enabling developers to define changes in SQLDeveloper and allowing DBAs to promote these changes to Test and Production via Enterprise Manager will reduce errors, accelerate productivity, and help eliminate unplanned downtime. Get your SQL Developer groove on at ODTUG Kscope12! Presentations SQL Developer Tips and Tricks Monday June 25, Session 5, 4:15 pm – 5:15 pm I’ll take you through my favorite keyboard shortcuts, top 10 preferences every user should tweak, and spotlight features that the average user probably hasn’t discovered yet. My goal for this session is for everyone to take 1-2 tips they can implement immediately to save mucho time. I enjoy interacting with the audience so no two versions of this presentation are the same. Oracle SQL Developer and Data Modeler New Features When: Tuesday June 26, Session 6, 8:30 am – 9:30 am Ashley Chen, my PM-partner-in-crime, will be covering all the new features from our two latest updates. So if you’re new to SQL Developer, or you’ve been using an older version, stop by and see what new toys you have to play with. I also have a bet with Ashley that she will have more attendees than me, so be sure to show up so I can collect. Debugging PL/SQL With SQL Developer When: Wednesday June 27, Session 16, 3:00 pm – 4:00 pm Me again – sorry. This time I have an entire hour to JUST talk about PL/SQL and debugging! Should you use a watch with a break condition, or a breakpoint with a passcount? How does external debugging with a Perl script work? Can I just debug an anonymous PL/SQL block. So if debugging to you is just a DBMS_OUTPUT.PUT_LINE() call, stop by and see how our IDE can help you take things to the next level! Or is that level++? Hands-on-Training SQL Developer Soup to Nuts When: Tuesday, 8:00 AM – 9:30 AM If you learn by doing, this is the session for you. Bring your own laptop or use one of the lab machines. We’ll give you a VirtualBox OEL image running 11gR2 EE Database with all the fixin’s (that’s Southern speak for Partitioning, Advanced Compression, Tuning & Diagnostic Packs, etc), TimesTen, APEX and much more. All you have to do is login and run through our lab exercises. You can start with a model and work your way up to debugging and testing your own appliction, or you can pick and choose your lessons to suit your needs. We’ll have people on hand to help you out and answer your questions. Booth Hours We’ll be in the vendor area and have our very own ‘demo pod’ for SQL Developer. Between Kris, Ashley, and I we should be able to answer your questions or show you how to ‘do that thing’ in the tool. Or just stop by and say hello! We’ll be around the following hours’ish: Sunday, June 24, 2012 6:00 PM – 8:00 PM Monday, June 25, 2012 9:00 AM – 4:30 PM Tuesday, June 26, 2012 9:30 AM – 3:30 PM Wednesday, June 27, 2012 10:15 AM – 2:00 PM No Excuses – If You Have Questions, This is Your Chance to Get Your Answers! We’re doing just about everything outside of a scavenger hunt to bring information and value to our users. Let us know what you like, what you don’t like, and we’ll do our best to do more of the former and less of the latter!

    Read the article

  • SQL Developer at Oracle Open World 2012

    - by thatjeffsmith
    We have a lot going on in San Francisco this fall. One of the most personal exciting bits, for what will be my 4th or 5th Open World, is that this will be my FIRST as a member of Team Oracle. I’ve presented once before, but most years it was just me pressing flesh at the vendor booths. After 3-4 days of standing and talking, you’re ready to just go home and not do anything for a few weeks. This time I’ll have a chance to walk around and talk with our users and get a good idea of what’s working and what’s not. Of course it will be a great opportunity for you to find us and get to know your SQL Developer team! 3.4 miles across and back – thanks Ashley for signing me up for the run! This year is going to be a bit crazy. Work wise I’ll be presenting twice, working a booth, and proctoring several of our Hands-On Labs. The fun parts will be equally crazy though – running across the Bay Bridge (I don’t run), swimming the Bay (I don’t swim), having my wife fly out on Wednesday for the concert, and then our first WhiskyFest on Friday (I do drink whisky though.) But back to work – let’s talk about EVERYTHING you can expect from the SQL Developer team. Booth Hours We’ll have 2 ‘demo pods’ in the Exhibition Hall over at Moscone South. Look for the farm of Oracle booths, we’ll be there under the signs that say ‘SQL Developer.’ There will be several people on hand, mostly developers (yes, they still count as people), who can answer your questions or demo the latest features. Come by and say ‘Hi!’, and let us know what you like and what you think we can do better. Seriously. Monday 10AM – 6PM Tuesday 9:45AM – 6PM Wednesday 9:45AM – 4PM Presentations Stop by for an hour, pull up a chair, sit back and soak in all the SQL Developer goodness. You’ll only have to suffer my bad jokes for two of the presentations, so please at least try to come to the other ones. We’ll be talking about data modeling, migrations, source control, and new features in versions 3.1 and 3.2 of SQL Developer and SQL Developer Data Modeler. Day Time Event Monday 10:454:45 What’s New in SQL Developer Why Move to Oracle Application Express Listener Tueday 10:1511:455:00 Using Subversion in Oracle SQL Developer Data Modeler Oracle SQL Developer Tips & Tricks Database Design with Oracle SQL Developer Data Modeler Wednesday 11:453:30 Migrating Third-Party Databases and Applications to Oracle Exadata 11g Enterprise Options and Management Packs for Developers Hands On Labs (HOLs) The Hands On Labs allow you to come into a classroom environment, sit down at a computer, and run through some exercises. We’ll provide the hardware, software, and training materials. It’s self-paced, but we’ll have several helpers walking around to answer questions and chat up any SQL Developer or database topic that comes to mind. If your employer is sending you to Open World for all that great training, the HOLs are a great opportunity to capitalize on that. They are only 60 minutes each, so you don’t have to worry about burning out. And there’s no homework! Of course, if you do want to take the labs home with you, many are already available via the Developer Day Hands-On Database Applications Developer Lab. You will need your own computer for those, but we’ll take care of the rest. Wednesday PL/SQL Development and Unit Testing with Oracle SQL Developer 10:15 Performance Tuning with Oracle SQL Developer 11:45 Thursday The Soup to Nuts of Data Modeling with Oracle SQL Developer Data Modeler 11:15 Some Parting Advice Always wanted to meet your favorite Oracle authors, speakers, and thought-leaders? Don’t be shy, walk right up to them and introduce yourself. Normal social rules still apply, but at the conference everyone is open and up for meeting and talking with attendees. Just understand if there’s a line that you might only get a minute or two. It’s a LONG conference though, so you’ll have plenty of time to catch up with everyone. If you’re going to be around on Tuesday evening, head on over to the OTN Lounge from 4:30 to 6:30 and hang out for our Tweet Meet. That’s right, all the Oracle nerds on Twitter will be there in one place. Be sure to put your Twitter handle on your name tag so we know who you are!

    Read the article

  • Seriously, It’s Time to Get Your Content Act Together

    - by Mike Stiles
    Branded content, content marketing, social content, brand journalism, we’re seeing those terms more and more. Why? The technology tools are coming together. We should know. We can gather big data, crunch it, listen to the public, moderate, respond, get to know the customer intimately, know what they like, know what they want, we can target, distribute, amplify, measure engagement and reaction, modify strategy and even automate a great deal of all that. An amazing machine, a sleek, smooth-running engine has been built such that all the parts can interact and work together to deliver peak performance and maximum output. But that engine isn’t going anywhere without any gas. Content is the gas. Yes, we curate other people’s content. We can siphon their gas. There’s tech to help with that too. But as for the creation of original, worthwhile content made for a specific audience, our audience, machines can’t do that…at least not yet. Curated content is great. But somebody has to originate the content for it to be curated and shared. And since the need for good, curated content is obviously large and the desire to share is there, it’s a winning proposition for a brand to be a consistent producer of original content. And yet, it feels like content is an issue we’re avoiding. There’s a reluctance to build a massive pipeline if you have no idea what you’re going to run through it. The C-suite often doesn’t know what content is, that it’s different from ads, where to get it, who makes it, how long it should be, what the point of it is if there’s no hard sell of the product, what it costs, how to use it, how to measure it, how to make sure it’s good, or how to make sure it will keep flowing. It could be the reason many brands aren’t pulling the trigger on socially enabling the enterprise. And that’s a shame, because there are a lot of creative, daring, experimental, uniquely talented entertainers and journalists chomping at the bit to execute content for brands. But for many corporate executives, content is “weird,” and the people who make it are even weirder. The content side of the equation is human. It’s art, but art that can be informed by data. The natural inclination is for brands to turn to their agencies for such creative endeavors. But agencies are falling into one of two categories. They’re failing to transition from ads to content. In “Content Era, What’s the Role of Agencies?” Alexander Jutkowitz says agencies were made for one-hit campaigns, not ongoing content. Or, they’re ready and capable but can’t get clients to do the right things. Agencies have to make money, even if it means continuing to do the wrong things because that’s all the client will agree to. So what we wind up with in the pipeline is advertising, marketing-heavy content, content that was obviously created or spearheaded by non-creative executives, random & inconsistent content, copy written for SEO bots, and other completely uninteresting nightmares. Frank Rose, author of “The Art of Immersion,” writes, “Content without story and excitement is noise pollution.” In the old days, you made an ad and inserted it into shows made by people who knew what they were doing. You could bask in that show’s success and leverage their audience. Now, you are tasked with attracting, amassing and holding your own audience. You may just want to make, advertise and sell your widgets. But now there’s a war on for a precious commodity, attention. People are busy. They have filters to keep uninteresting and irrelevant things out. They value their time and expect value back when they give it up. Joe Pulizzi, founder of the Content Marketing Institute, says, "Your customers don't care about you, your products, your services…they care about themselves, their wants and their needs." Is it worth getting serious about content and doing it right? 61% of consumers feel better about a company that delivers custom content (Custom Content Council). Interesting content is one of the top 3 reasons people follow brands on social (Content+). 78% of consumers think organizations that provide custom content want to build good relationships with them (TMG Custom Media). On the B2B side, 80% of business decision makers prefer to get company info in a series of articles vs. an ad. So what’s the hang-up? Cited barriers to content marketing are lack of human resources (42%) and lack of budget (35%). 54% of brands don’t have a single on-site, dedicated content creator. And only 38% of brands have a content marketing strategy. Tech has built the biggest, most incredible stage for brands that’s ever been built. Putting something on that stage is your responsibility. Do a bad show, or no show at all, and you’ll be the beautiful, talented actress that never got discovered. @mikestilesPhoto: Gabriella Fabbri, stock.xchng

    Read the article

  • SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience

    - by pinaldave
    Allen  Tuladhar I recently came back from my 9-day trip in Nepal and I must say that this is one of the best trips I had in my lifetime. Allen Bailochan Tuladhar is a wonderful person and an extreme enthusiast for Microsoft Technology. Allen is the Chief Executive Officer of Unlimited Technologies Pvt Ltd., Country Manager of Microsoft MDP Nepal, the Member Secretary of Nepali Language in Information Technology, and member of the Steering Committee of the Government of Nepal. He is the person who keeps the Nepal’s Tech Community constantly motivating and taking it to the next level. I have met Allen for many times before, but this was the first time I was with him in Kathmandu, Nepal. I was very impressed with the amount of the work he does in the community. During my 9 days of stay, every single day was a new lesson for me. I was amazed and overwhelmed with the many things he does every single day. Not only he does he work closely with Government of Nepal ministry, but he is also the most known person in the Student Community. His expertise in the technical subject matter is not limited to one technology; rather, I have seen him actively engaging himself in  discussions of various tech topics. Allen presending at TechMela Kathmandu, Nepal Allen is currently active in working out to localize Windows and Office and incorporate it using the Nepali language. I was able to witness and experience how the localization works, as well as the procedure on how to do such. If you know the whole localization process, you must have realized how big and daunting of a process it is. I was glad that I became a part of it. Prominent Personality of Nepal on Panel Discussion Another great opportunity I had when I was at Allen’s office is that I have learned how the radio technology talk show works. Nepali Radio station has the weekly program in their local language, in which MS technology is discussed and industry leaders are invited to talk about their experience with the technology. I found the program so interesting because it has so much variety in terms of technology subjects. Well, my understanding of Nepali language is limited but I did understand quite a bit. Ravi, Nutan, Pinal, Gandip I got the chance to meet lots of Database Professionals as well. People in Nepal are very polite even though they are very strong in their technology fundamentals. I had in-depth discussion regarding High Availability scenarios, as well Query Tuning. Database professionals from the leading financial sectors of Nepal wanted me to visit their Data Center and help them out with a few advances. In no time, Allen organized a visit for me. He sent me a Nepali-speaking expert from his own organization to accompany me in overcoming any difficulties while I was on my way helping this financial district. Pinal (SQLAuthority) and Deependra (Unlimited) When I was going to Nepal, I was really not sure if I would be able to stay busy for 9 days straight in Community-related activity. However, on the 9th day I realize that I can still stay here for more than 9 days because in every single day, I feel enthusiastic enough to do something new. Allen Bailochan Tuladhar Even though I was working  very hard every day, I hardly had the chance to work with and talk to him one-on-one for the first few days. One of the evenings, Allen invited me to his home and we discussed about his future ideas. I was really surprised to see how much a man can do for his technical community and for his country. When I asked Allen’s wife and daughter if they ever think it’s getting too much with regards to Allen putting tough efforts to the community, their answer was something I did not expect. I found out that Allen’s wife manages all the back office and logistics of the community events and his daughter manages the websites. I felt that they do not have any complain,  and instead, their whole family is in this activity as deeply as it can get, which I thought is a very good thing. Pinal and Allen I want to end this post with an interesting story that happened during our lunch hour at one of the Nepali restaurants. While we were having our lunch and having some chitchat, Allen suddenly stood up and called several people walking along the pavement. He introduced them all to me as Microsoft Student Partners. He asked all of them to order their favorite dish and called the waiter to inform that he will pick up their tab. Figuring out the question written on my face, he just said one sentence: “They are all future technology professionals who are going to make all of us proud.” I guess I have a lot of things to learn. Hats off to Allen! Pinal and Allen at Microsoft MDP Unlimited Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

    Read the article

  • Last week I was presented with a Microsoft MVP award in Virtual Machines – time to thank all who hel

    - by Liam Westley
    MVP in Virtual Machines Last week, on 1st April, I received an e-mail from Microsoft letting me know that I had been presented with a 2010 Microsoft® MVP Award for outstanding contributions in Virtual Machine technical communities during the past year.   It was an honour to be nominated, and is a great reflection on the vibrancy of the UK user group community which made this possible. Virtualisation for developers, not just IT Pros I consider it a special honour as my expertise in virtualisation is as a software developer utilising virtual machines to aid my software development, rather than an IT Pro who manages data centre and network infrastructure.  I’ve been on a minor mission over the past few years to enthuse developers in a topic usually seen as only for network admins, but which can make their life a whole lot easier once understood properly. Continuous learning is fun In 1676, the scientist Isaac Newton, in a letter to Robert Hooke used the phrase (http://www.phrases.org.uk/meanings/268025.html) ‘If I have seen a little further it is by standing on the shoulders of Giants’ I’m a nuclear physicist by education, so I am more than comfortable that any knowledge I have is based on the work of others.  Although far from a science, software development and IT is equally built upon the work of others. It’s one of the reasons I despise software patents. So in that sense this MVP award is a result of all the great minds that have provided virtualisation solutions for me to talk about.  I hope that I have always acknowledged those whose work I have used when blogging or giving presentations, and that I have executed my responsibility to share any knowledge gained as widely as possible. Thanks to all those who helped – a big thanks to the UK user group community I reckon this journey started in 2003 when I started attending a user group called the London .Net Users Group (http://www.dnug.org.uk) started by a nice chap called Ian Cooper. The great thing about Ian was that he always encouraged non professional speakers to take the stage at the user group, and my first ever presentation was on 30th September 2003; SQL Server CE 2.0 and the.NET Compact Framework. In 2005 Ian Cooper was on the committee for the first DeveloperDeveloperDeveloper! day, the free community conference held at Microsoft’s UK HQ in Thames Valley park in Reading.  He encouraged me to take part and so on 14th May 2005 I presented a talk previously given to the London .Net User Group on Simplifying access to multiple DB providers in .NET.  From that point on I definitely had the bug; presenting at DDD2, DDD3, groking at DDD4 and SQLBits I and after a break, DDD7, DDD Scotland and DDD8.  What definitely made me keen was the encouragement and infectious enthusiasm of some of the other DDD organisers; Craig Murphy, Barry Dorrans, Phil Winstanley and Colin Mackay. During the first few DDD events I met the Dave McMahon and Richard Costall from NxtGenUG who made it easy to start presenting at their user groups.  Along the way I’ve met a load of great user group organisers; Guy Smith-Ferrier of the .Net Developer Network, Jimmy Skowronski of GL.Net and the double act of Ray Booysen and Gavin Osborn behind what was Vista Squad and is now Edge UG. Final thanks to those who suggested virtualisation as a topic ... Final thanks have to go the people who inspired me to create my Virtualisation for Developers talk.  Toby Henderson (@holytshirt) ensured I took notice of Sun’s VirtualBox, Peter Ibbotson for being a fine sounding board at the Kew Railway over quite a few Adnam’s Broadside and to Guy Smith-Ferrier for allowing his user group to be the guinea pigs for the talk before it was seen at DDD7.  Thanks to all of you I now know much more about virtualisation than I would have thought possible and it continues to be great fun. Conclusion If this was an academy award acceptance speech I would have been cut off after the first few paragraphs, so well done if you made it this far.  I’ll be doing my best to do justice to the MVP award and the UK community.  I’m fortunate in having a new employer who considers presenting at user groups as a good thing, so don’t expect me to stop any time soon. If you’ve never seen me in action, then you can view the original DDD7 Virtualisation for Developers presentation (filmed by the Microsoft Channel 9 team) as part of the full DDD7 video list here, http://www.craigmurphy.com/blog/?p=1591.  Also thanks to Craig Murphy’s fine video work you can also view my latest DDD8 presentation on Commercial Software Development, here, http://vimeo.com/9216563 P.S. If I’ve missed anyone out, do feel free to lambast me in comments, it’s your duty.

    Read the article

  • Surface development: it&rsquo;s just like software development

    - by Dennis Vroegop
    Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

    Read the article

  • Why Software Sucks...and What You Can Do About It – book review

    - by DigiMortal
        How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

    Read the article

  • Figuring out the IIS Version for a given OS in .NET Code

    - by Rick Strahl
    Here's an odd requirement: I need to figure out what version of IIS is available on a given machine in order to take specific configuration actions when installing an IIS based application. I build several configuration tools for application configuration and installation and depending on which version of IIS is available on IIS different configuration paths are taken. For example, when dealing with XP machine you can't set up an Application Pool for an application because XP (IIS 5.1) didn't support Application pools. Configuring 32 and 64 bit settings are easy in IIS 7 but this didn't work in prior versions and so on. Along the same lines I saw a question on the AspInsiders list today, regarding a similar issue where somebody needed to know the IIS version as part of an ASP.NET application prior to when the Request object is available. So it's useful to know which version of IIS you can possibly expect. This should be easy right? But it turns there's no real easy way to detect IIS on a machine. There's no registry key that gives you the full version number - you can detect installation but not which version is installed. The easiest way: Request.ServerVariables["SERVER_SOFTWARE"] The easiest way to determine IIS version number is if you are already running inside of ASP.NET and you are inside of an ASP.NET request. You can look at Request.ServerVariables["SERVER_SOFTWARE"] to get a string like Microsoft-IIS/7.5 returned to you. It's a cinch to parse this to retrieve the version number. This works in the limited scenario where you need to know the version number inside of a running ASP.NET application. Unfortunately this is not a likely use case, since most times when you need to know a specific version of IIS when you are configuring or installing your application. The messy way: Match Windows OS Versions to IIS Versions Since Version 5.x of IIS versions of IIS have always been tied very closely to the Operating System. Meaning the only way to get a specific version of IIS was through the OS - you couldn't install another version of IIS on the given OS. Microsoft has a page that describes the OS version to IIS version relationship here: http://support.microsoft.com/kb/224609 In .NET you can then sniff the OS version and based on that return the IIS version. The following is a small utility function that accomplishes the task of returning an IIS version number for a given OS: /// <summary> /// Returns the IIS version for the given Operating System. /// Note this routine doesn't check to see if IIS is installed /// it just returns the version of IIS that should run on the OS. /// /// Returns the value from Request.ServerVariables["Server_Software"] /// if available. Otherwise uses OS sniffing to determine OS version /// and returns IIS version instead. /// </summary> /// <returns>version number or -1 </returns> public static decimal GetIisVersion() { // if running inside of IIS parse the SERVER_SOFTWARE key // This would be most reliable if (HttpContext.Current != null && HttpContext.Current.Request != null) { string os = HttpContext.Current.Request.ServerVariables["SERVER_SOFTWARE"]; if (!string.IsNullOrEmpty(os)) { //Microsoft-IIS/7.5 int dash = os.LastIndexOf("/"); if (dash > 0) { decimal iisVer = 0M; if (Decimal.TryParse(os.Substring(dash + 1), out iisVer)) return iisVer; } } } decimal osVer = (decimal) Environment.OSVersion.Version.Major + ((decimal) Environment.OSVersion.Version.MajorRevision / 10); // Windows 7 and Win2008 R2 if (osVer == 6.1M) return 7.5M; // Windows Vista and Windows 2008 else if (osVer == 6.0M) return 7.0M; // Windows 2003 and XP 64 bit else if (osVer == 5.2M) return 6.0M; // Windows XP else if (osVer == 5.1M) return 5.1M; // Windows 2000 else if (osVer == 5.0M) return 5.0M; // error result return -1M; } } Talk about a brute force apporach, but it works. This code goes only back to IIS 5 - anything before that is not something you possibly would want to have running. :-) Note that this is updated through Windows 7/Windows Server 2008 R2. Later versions will need to be added as needed. Anybody know what the Windows Version number of Windows 8 is?© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  IIS   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Browsing Your ADF Application Module Pooling Params with WLST

    - by Duncan Mills
    In ADF 11g you can of course use Enterprise Manager (EM) to browse and configure the settings used by ADF Business Components  Application Modules, as shown here for one of my sample deployed applications. This screen you can access from the EM homepage by pulling down the Application Deployment menu, and then ADF > Configure ADF Business Components. Then select the profile that you are actually using (Hint: look in the DataBindings.cpx file to work this out - probably the "Local" version unless you've explicitly changed it. )So, from this screen you can change the pooling parameters and the world is good. But what if you don't have EM installed? In that case you can use the WebLogic scripting capabilities to view (and Update) the MBean Properties. Explanation The pooling parameters and many others are handled through Message Driven Beans that are created for the deployed application in the server. In the case of the ADF BC pooling parameters, this MBean will combine the configuration deployed as part of the application, along with any overrides defined as -D environement commands on the JVM startup for the application server instance. Using WLST to Browse the Bean ValuesFor our purposes here I'm doing this interactively, although you can also write a script or write Java to achieve the same thing.Step 0: Before You Start You will need the followingAccess to the console on the machine that is running the serverThe WebLogic Admin username and password (I'll use weblogic/password as my example here - yours will be different)The name of the deployed application (in this example FMWdh_application1)The package path to the bc4j.xcfg file (in this example oracle.demo.fmwdh.model.service.common.bc4j.xcfg) This is based on the default path for your model project so it shoudl be fairly easy to work out.The BC configuration your AM is actually running with (look in the DataBindings.cpx for that. In this example DealHelpServiceDeployed is the profile being used..)Step 1: Start the WLST consoleTo start at the beginning, you need to run the WLST command but that needs a little setup:Change to the wlserver_10.3/server/bin directory e.g. under your Fusion Middleware Home[oracle@mymachine] cd /home/oracle/FMW_R1/wlserver_10.3/server/binSet your environment using the setWLSEnv script. e.g. on Oracle Enterprise Linux:[oracle@mymachine bin] source setWLSEnv.shStart the WLST interactive console[oracle@mymachine bin] java weblogic.WLSTInitializing WebLogic Scripting Tool (WLST) ...Welcome to WebLogic Server Administration Scripting ShellType help() for help on available commandswls:/offline> Step 2:Enter the WLST commandsConnect to the server wls:> connect('weblogic','password')Change to the Custom root, this is where the AMPooling MBeans are registered wls:> custom()Change to the b4j MBean directorywls:> cd ('oracle.bc4j.mbean.config')Work out the correct directory for the AM configuration you need. This is the difficult bit, not because it's hard to do, but because the names are long. The structure here is such that every child MBean is displayed at the same level as the parent, so for each deployed application there will be many directories shown. In fact, do an ls() command here and you'll see what I mean. Each application will have one MBean for the app as a whole, and then for each deployed configuration in the .xcfg file you'll see: One for the config entry itself, and then one each for Security, DB Connection and AM Pooling. So if you deploy an app with just one configuration you'll see 5 directories, if it has two configurations in the .xcfg you'll see 9 and so on.The directory you are looking for will contain those bits of information you gathered in Step 0, specifically the Application Name, the configuration you are using and the xcfg name: First of all narrow your list to just those directories returned from the ls() command that begin oracle.bc4j.mbean.config:name=AMPool. These identify the AM pooling MBeans for all the deployed applications. Now look for the correct application name e.g. Application=FMWdh_application1The config setting in that sub-list should already be correct and match what you expect e.g. oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfgFinally look for the correct value for the AppModuleConfigType e.g. oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployedNow you have identified the correct directory name, change to that (keep the name on one line of course - I've had to split it across lines here for clarity:wls:> cd ('oracle.bc4j.mbean.config:name=AMPool,     type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,    oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,    Application=FMWdh_application1,    oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed') Now you can actually view the parameter values with a simple ls() commandwls:> ls()And here's the output in which you can view the realtime values of the various pool settings: -rw- AmpoolConnectionstrategyclass oracle.jbo.common.ampool.DefaultConnectionStrategy -rw- AmpoolDoampooling true -rw- AmpoolDynamicjdbccredentials false -rw- AmpoolInitpoolsize 2 -rw- AmpoolIsuseexclusive true -rw- AmpoolMaxavailablesize 40 -rw- AmpoolMaxinactiveage 600000 -rw- AmpoolMaxpoolsize 4096 -rw- AmpoolMinavailablesize 2 -rw- AmpoolMonitorsleepinterval 600000 -rw- AmpoolResetnontransactionalstate true -rw- AmpoolSessioncookiefactoryclass oracle.jbo.common.ampool.DefaultSessionCookieFactory -rw- AmpoolTimetolive 3600000 -rw- AmpoolWritecookietoclient false -r-- ConfigMBean true -rw- ConnectionPoolManager oracle.jbo.server.ConnectionPoolManagerImpl -rw- Doconnectionpooling false -rw- Dofailover false -rw- Initpoolsize 0 -rw- Maxpoolcookieage -1 -rw- Maxpoolsize 4096 -rw- Poolmaxavailablesize 25 -rw- Poolmaxinactiveage 600000 -rw- Poolminavailablesize 5 -rw- Poolmonitorsleepinterval 600000 -rw- Poolrequesttimeout 30000 -rw- Pooltimetolive -1 -r-- ReadOnly false -rw- Recyclethreshold 10 -r-- RestartNeeded false -r-- SystemMBean false -r-- eventProvider true -r-- eventTypes java.lang.String[jmx.attribute.change] -r-- objectName oracle.bc4j.mbean.config:name=AMPool,type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,Application=FMWdh_application1,oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed -rw- poolClassName oracle.jbo.common.ampool.ApplicationPoolImpl Thanks to Brian Fry on the JDeveloper PM Team who did most of the work to put this sequence of steps together with me badgering him over his shoulder.

    Read the article

  • Replication Services in a BI environment

    - by jorg
    In this blog post I will explain the principles of SQL Server Replication Services without too much detail and I will take a look on the BI capabilities that Replication Services could offer in my opinion. SQL Server Replication Services provides tools to copy and distribute database objects from one database system to another and maintain consistency afterwards. These tools basically copy or synchronize data with little or no transformations, they do not offer capabilities to transform data or apply business rules, like ETL tools do. The only “transformations” Replication Services offers is to filter records or columns out of your data set. You can achieve this by selecting the desired columns of a table and/or by using WHERE statements like this: SELECT <published_columns> FROM [Table] WHERE [DateTime] >= getdate() - 60 There are three types of replication: Transactional Replication This type replicates data on a transactional level. The Log Reader Agent reads directly on the transaction log of the source database (Publisher) and clones the transactions to the Distribution Database (Distributor), this database acts as a queue for the destination database (Subscriber). Next, the Distribution Agent moves the cloned transactions that are stored in the Distribution Database to the Subscriber. The Distribution Agent can either run at scheduled intervals or continuously which offers near real-time replication of data! So for example when a user executes an UPDATE statement on one or multiple records in the publisher database, this transaction (not the data itself) is copied to the distribution database and is then also executed on the subscriber. When the Distribution Agent is set to run continuously this process runs all the time and transactions on the publisher are replicated in small batches (near real-time), when it runs on scheduled intervals it executes larger batches of transactions, but the idea is the same. Snapshot Replication This type of replication makes an initial copy of database objects that need to be replicated, this includes the schemas and the data itself. All types of replication must start with a snapshot of the database objects from the Publisher to initialize the Subscriber. Transactional replication need an initial snapshot of the replicated publisher tables/objects to run its cloned transactions on and maintain consistency. The Snapshot Agent copies the schemas of the tables that will be replicated to files that will be stored in the Snapshot Folder which is a normal folder on the file system. When all the schemas are ready, the data itself will be copied from the Publisher to the snapshot folder. The snapshot is generated as a set of bulk copy program (BCP) files. Next, the Distribution Agent moves the snapshot to the Subscriber, if necessary it applies schema changes first and copies the data itself afterwards. The application of schema changes to the Subscriber is a nice feature, when you change the schema of the Publisher with, for example, an ALTER TABLE statement, that change is propagated by default to the Subscriber(s). Merge Replication Merge replication is typically used in server-to-client environments, for example when subscribers need to receive data, make changes offline, and later synchronize changes with the Publisher and other Subscribers, like with mobile devices that need to synchronize one in a while. Because I don’t really see BI capabilities here, I will not explain this type of replication any further. Replication Services in a BI environment Transactional Replication can be very useful in BI environments. In my opinion you never want to see users to run custom (SSRS) reports or PowerPivot solutions directly on your production database, it can slow down the system and can cause deadlocks in the database which can cause errors. Transactional Replication can offer a read-only, near real-time database for reporting purposes with minimal overhead on the source system. Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!

    Read the article

  • HR According to Batman

    - by D'Arcy Lussier
    Any idea who that guy is running alongside the Caped Crusader? That’s Nightwing, but you may know him as Robin…well, the first Robin anyway. There were actually like 5 Robin’s according to Wikipedia: Dick Grayson, the original, who’s parents were circus performers killed by a gangster. Jason Todd, who was caught trying to steal tires off of the Batmobile. Tim Drake, who saw Dick’s parents die and figured out who Batman and Robin were. and a few others that get into recent time travel/altered reality storylines. What does this have to do with HR? Well, it somewhat ties in with an article by Alex Papadimoulis from 2008. In the article he talks about the “Cravath System”. The Craveth system was developed by a law firm called Cravath, Swaine & Moore back in the 19th century. In a nutshell, they believed in hiring the best and brightest straight out of school. These aspiring lawyers would then begin a fight for survival in the firm, with the strong surviving. In what’s termed the “Up and Out” rule, employees needed to be promoted within 3 years or leave the company. They should achieve partner within 7 – 8 years and no later than 10 after initially coming on board (read all about the system on Wikipedia here). Back to Alex’s article, he quotes from a book published in 1947 about the lawfirm: Under the “Cravath system” of taking a substantial number of men annually and keeping a current constantly moving up in the office, and its philosophy of tenure, men are constantly leaving… it is often difficult to keep the best men long enough to determine whether they shall be made partners, for Cravath-trained men are always in demand, usually at premium salaries. And so we see a pattern forming here: 1. Hire a whole whack of smart college graduates 2. Put them to work 3. The ones that stick around should move up the ladder. The ones that don’t stick around served the company well and left to expound the quality of the Cravath firm. Those that didn’t fall into either of those categories were just let go. There’s some interesting undercurrents to these ideas. If you stick around, you better keep your feet moving! I was at a Microsoft shindig a few months back, and was talking to a Microsoft employee. He shared that at MS you have 5 years to achieve a “senior” position within the company. Once you hit that mark, you can stay there for the rest of your career (he told about a guy who’s a “senior” developer and has been for the last 20+ years working on audio drivers for Windows), but you *must* hit that mark within the timeframe. What we see with Microsoft is Cravath’s system in action, whether intentional or not: bring in smart young people and see which ones stick. You need to give people something to work towards. Saying “You must reach this level or else!” is one way to look at it. The other way is to see achieving a higher rank in the organization as something for ambitious employees to reach towards. It’s important for an organization to always have the next generation of executives waiting in the wings, and unless you’re encouraging that early on you may find yourself in a position of needing to fill positions that nobody has been working towards. Now, you might suggest that this isn’t that big of a deal because you could just hire someone from outside the organization, but the Cravath system holds to the tenet of promoting internally; develop your own talent, since your business is the best place for the future leadership to learn teh business from. It’s OK for people to quit. Alex’s article really drives this point home, but its worth noting here also: its OK for your people to quit. In fact its inevitable…and more inevitable that it’ll be good people that leave. Some will stay and work towards the internal awards of promotion, but a number will get experience, serve the organization well, and then move on to something else. This should be expected and treated as a natural business occurrence. The idea of an alumni of an organization begins to come into play here: “That guy used to work for <insert company here>”. There’s a benefit in that: those best and brightest will be drawn to your organization and your reputation will permeate your market through former staff that are sought after because of how well you nurtured them. The Batman Hook All of this brings us back to Batman and his HR practice: when Dick decided he’d had enough of the Robin schtick, he quit and became his own…but he was always associated with Batman and people understood where his training had come from. To the Dark Knight’s credit, he continued training partners under the Robin brand. Luckily he didn’t have to worry about firing any of them (the ship sort of sails when you reveal a secret identity), although there was that unfortunate “quitting” of the second Robin when the Joker blew him up…but regardless, we see the Cravath system at work: bring in talent, expect great things, and be ok with whatever they decide for their careers. It’s an interesting way to approach HR, and luckily for us our business isn’t as dangerous or over-the-top as the caped crusader’s.

    Read the article

  • .NET vs Windows 8

    - by Simon Cooper
    So, day 1 of DevWeek. Lots and lots of Windows 8 and WinRT, as you would expect. The keynote had some actual content in it, fleshed out some of the details of how your apps linked into the Metro infrastructure, and confirmed that there would indeed be an enterprise version of the app store available for Metro apps.) However, that's, not what I want to focus this post on. What I do want to focus on is this: Windows 8 does not make .NET developers obsolete. Phew! .NET in the New Ecosystem In all the hype around Windows 8 the past few months, a lot of developers have got the impression that .NET has been sidelined in Windows 8; C++ and COM is back in vogue, and HTML5 + JavaScript is the New Way of writing applications. You know .NET? It's yesterday's tech. Enter the 21st Century and write <div>! However, after speaking to people at the conference, and after a couple of talks by Dave Wheeler on the innards of WinRT and how .NET interacts with it, my views on the coming operating system have changed somewhat. To summarize what I've picked up, in no particular order (none of this is official, just my sense of what's been said by various people): Metro apps do not replace desktop apps. That is, Windows 8 fully supports .NET desktop applications written for every other previous version of Windows, and will continue to do so in the forseeable future. There are some apps that simply do not fit into Metro. They do not fit into the touch-based paradigm, and never will. Traditional desktop support is not going away anytime soon. The reason Silverlight has been hidden in all the Metro hype is that Metro is essentially based on Silverlight design principles. Silverlight developers will have a much easier time writing Metro apps than desktop developers, as they would already be used to all the principles of sandboxing and separation introduced with Silverlight. It's desktop developers who are going to have to adapt how they work. .NET + XAML is equal to HTML5 + JS in importance. Although the underlying WinRT system is built on C++ & COM, most application development will be done either using .NET or HTML5. Both systems have their own wrapper around the underlying WinRT infrastructure, hiding the implementation details. The CLR is unchanged; it's still the .NET 4 CLR, running IL in .NET assemblies. The thing that changes between desktop and Metro is the class libraries, which have more in common with the Silverlight libraries than the desktop libraries. In Metro, although all the types look and behave the same to callers, some of the core BCL types are now wrappers around their WinRT equivalents. These wrappers are then enhanced using standard .NET types and code to produce the Metro .NET class libraries. You can't simply port a desktop app into Metro. The underlying file IO, network, timing and database access is either completely different or simply missing. Similarly, although the UI is programmed using XAML, the behaviour of the Metro XAML is different to WPF or Silverlight XAML. Furthermore, the new design principles and touch-based interface for Metro applications demand a completely new UI. You will be able to re-use sections of your app encapsulating pure program logic, but everything else will need to be written from scratch. Microsoft has taken the opportunity to remove a whole raft of types and methods from the Metro framework that are obsolete (non-generic collections) or break the sandbox (synchronous APIs); if you use these, you will have to rewrite to use the alternatives, if they exist at all, to move your apps to Metro. If you want to write public WinRT components in .NET, there are some quite strict rules you have to adhere to. But the compilers know about these rules; you can write them in C# or VB, and the compilers will tell you when you do something that isn't allowed and deal with the translation to WinRT metadata rather than .NET assemblies. It is possible to write a class library that can be used in Metro and desktop applications. However, you need to be very careful not to use types that are available in one but not the other. One can imagine developers writing their own abstraction around file IO and UIs (MVVM anyone?) that can be implemented differently in Metro and desktop, but look the same within your shared library. So, if you're a .NET developer, you have a lot less to worry about. .NET is a viable platform on Metro, and traditional desktop apps are not going away. You don't have to learn HTML5 and JavaScript if you don't want to. Hurray!

    Read the article

  • Connection Pooling is Busted

    - by MightyZot
    A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

    Read the article

  • Oracle Enterprise Manager Cloud Control 12c: Contributing to emerging Cloud standards

    - by Anand Akela
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Contributed by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups . As one would expect of an industry leader, Oracle's participation in industry standards bodies is extensive. We participate in dozens of organizations that produce open standards which apply to our products, and our commitment to the success of these organizations is manifest in several way - we support them financially through our memberships; our senior engineers are active participants, often serving in leadership positions on boards, technical working groups and committees; and when it makes good business sense we contribute our intellectual property. We believe supporting the development of open standards is fundamental to Oracle meeting customer demands for product choice, seamless interoperability, and lowering the cost of ownership. Nowhere is this truer than in the area of cloud standards, and for the most recent release of our flagship management product, Oracle Enterprise Manager Cloud Control 12c (EM Cloud Control 12c). There is a fundamental rule that standards follow architecture. This was true of distributed computing, it was true of service-oriented architecture (SOA), and it's true of cloud. If you are familiar with Enterprise Manager it is likely to be no surprise that EM Cloud Control 12c is a source of technology that can be considered for adoption within cloud management standards. The reason, quite simply, is that the Oracle integrated stack architecture aligns with the cloud architecture models being adopted by the industry, and EM Cloud Control 12c has been developed to manage this architecture. EM Cloud Control 12c has facilities for managing the various underlying capabilities of the integrated stack in IaaS, PaaS, and SaaS clouds, and enables essential characteristics such as on-demand self-service provisioning, centralized policy-based resource management, integrated chargeback, and capacity planning, and complete visibility of the physical and virtual environment from applications to disk. Our most recent contribution in support of cloud management standards to come out of the EM Cloud Control 12c work was the Oracle Cloud Elemental Resource Model API. Oracle contributed the Elemental Resource Model API to the Distributed Management Task Force (DMTF) in 2011 where it was assigned to DMTF's Cloud Management Working Group (CMWG). The CMWG is considering the Oracle specification and those of several other vendors in their effort to produce a best practices specification for managing IaaS clouds. DMTF's Cloud Infrastructure Management Interface specification, called CIMI for short, is currently out for public review and expected to be released by DMTF later this year. We are proud to be playing an important role in the development of what is expected to become a major cloud standard. You can find more information on DMTF CIMI at http://dmtf.org/standards/cloud. You can find the work-in-progress release of CIMI at http://dmtf.org/content/cimi-work-progress-specifications-now-available-public-comment . The Oracle Cloud API specification is available on the Oracle Technology Network. You can find more information about the Oracle Cloud Elemental Resource Model API on the Oracle Technical Network (OTN), including a webcast featuring the API engineering manager Jack Yu (see TechCast Live: Inside the Oracle Cloud Resource Model API). If you have not seen this video we recommend you take the time to view it. Simply hover your cursor over the webcast title and control+click to follow the embedded link. If you have a question about the Oracle Cloud API or want to learn more about Oracle's participation in cloud management standards efforts drop us a line. We'd love to hear from you. The Enterprise Manager Standards Blogs are written by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups. They can be reached at Tony.DiCenzo at Oracle.com and Mark.Carlson at Oracle.com respectively. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

    - by Brian Schroer
    Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O.    Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.  Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers.  Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >