Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 168/365 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• No audio with headphones, but audio works with integrated speakers

  - by Pedro

  My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

  Read the article

• Silverlight Cream for January 16, 2011 -- #1029

  - by Dave Campbell

  In this Issue: Michael Washington, Jesse Liberty, Deborah Kurata(-2-, -3-, -4-), Sergey Barskiy(-2-), Miroslav Nedyalkov, Jeff Prosise, and Matthias Shapiro(-2-). Above the Fold: Silverlight: "Building a Multi-Page Silverlight LOB Application" Deborah Kurata WP7: "Windows Phone 7 [Controls] Project" Sergey Barskiy Sketchflow: "Sketchflow To Final" Michael Washington From SilverlightCream.com: Sketchflow To Final Check out this post by Michael Washington detailing the Sketchflow he did of his app, and how the final result tracks amazingly well. Windows Phone From Scratch #19 – MVVM Light Toolkit Soup To Nuts #4 Continuing to try to catch up to Jesse Liberty is this post, number 19 in the Windows Phone series and the 4th in that series about MVVMLight, and discussing binding a collection in the ViewModel to a ListBox in the view. Building a Multi-Page Silverlight LOB Application Deborah Kurata has the first 4 parts up (in 2 days) in a 6-part tutorial series she's doing on building a Silverlight LOB app. The first post was an intro and link to the rest as they become available. This 2nd post is getting the app newed up and making sure you've got your head wrapped around multiple pages. Theming a Silverlight Application using Existing Themes Deborah Kurata's next part is about getting started with themes in your app using the themes provided in the toolkit specifically. Theming a Silverlight Application using Custom Themes Deborah Kurata's next tutorial in the series is also about themes, but this time it's about custom themes... or rather customized from a 'standard' one in this case. Adding a New Page to a Multi-Page Silverlight Application Deborah Kurata's last available post in the tutorial series is this one on adding a new page to the app. Windows Phone 7 Project Sergey Barskiy has a pair of posts up about a calendar control that he is building and has out on CodePlex... nice-looking control too! Windows Phone 7 Controls Project Update Sergey Barskiy's second post is an update to the calendar... the biggest update being the ability to use the Toolkit context menu. How to Create Ad Rotator with Telerik TransitionControl and CoverFlow control for Silverlight Miroslav Nedyalkov uses the Telerik TransitionControl and CoverFlow controls to produce a great-looking ad rotator using any ContentControl or ListBox... very nice demo on the page.... Building Touch Interfaces for Windows Phones, Part 2 Jeff Prosise has part 2 of his tutorial series on WP7 Touch Interfaces up... and he's processing touch events directly in this one. Fixing the ListPicker / ScrollViewer Problem in Windows Phone 7 Matthias Shapiro has a couple of posts out that I've missed... this one is on an issue with ListPickers in a ScrollViewer where the listpicker gets hit rather than the scroll, and of course he has a work-around... but you'll need the source for the ListPicker to do it. Embedding a Sound File in Windows Phone 7 app (Silverlight) The next post by Matthias Shapiro is an explanation of embedding a sound file in a WP7 app with 2 conditions: 1) it downloads with your app, and 2) it plays no matter what. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Healthcare and Distributed Data Don't Mix

  - by [email protected]

  How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

  Read the article

• Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

  - by Alix Axel

  My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

  Read the article

• InfoPath 2010 Form Design and Web Part Deployment

  - by JKenderdine

  In January I had the pleasure to speak at SharePoint Saturday Virginia Beach.  I presented a session on InfoPath 2010 forms design which included some of the basics of Forms Design, description of some of the new options with InfoPath 2010 and SharePoint 2010, and other integration possibilities.  Included below is the information presented as well as the solution to create the demo: First thing you need to understand is what the difference is between an InfoPath List form and a Form Library Form?  SharePoint List Forms:  Store data directly in a SharePoint list.  Each control (e.g. text box) in the form is bound to a column in the list. SharePoint list forms are directly connected to the list, which means that you don’t have to worry about setting up the publish and submit locations. You also do not have the option for back-end code. Form Library Forms:  Store data in XML files in a SharePoint form library.  This means they are more flexible and you can do more with them.  For example, they can be configured to save drafts and submit to different locations. However, they are more complex to work with and require more decisions to be made during configuration.  You do have the option of back-end code with these type of forms. Next steps: You need to create your File Architecture Plan.  Plan the location for the saved template – both Test and Production (This is pretty much a given, but just in case - Always make sure to have a test environment) Plan for the location of the published template Then you need to document your Form Template Design Plan.  Some questions to ask to gather your requirements: What will the form be designed to do? Will it gather user information? Will it display data from a data source? Do we need to show different views to different users? What do we base this on? How will it be implemented for the users? Browser or Client based form Site collection content type – Published through Central Admin Form Library – Published directly to form library So what are the requirements for this template?  Business Card Request Form Template Design Plan Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Show and hide fields as necessary for requirements Create multiple views – one for those submitting the form and another view for the executive assistants placing the orders. Browser based form integrated into SharePoint team site Published directly to form library The form was published through Central Administration and incorporated into the site as a content type. Utilizing the new InfoPath Web part, the form is integrated into the page and the users can complete the form directly from within that page. For now, if you are interested in the final form XSN, contact me using the Contact link above.   I will post soon with the details on how the form was created and how it integrated the requirements detailed above.

  Read the article

• Improve Playback Using Enhancements in Windows Media Player 12

  - by DigitalGeekery

  Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options.   You can switch between the individual enhancements by clicking the right and left buttons at the top left.   Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values.   You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished.   Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast.   You can also adjust the zoom settings by clicking Select video zoom settings.   Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

  Read the article

• Joy! | Important Information About Your iPad 3G

  - by Jeff Julian

  Looks like I was one of the lucky 114,000 who AT&T lost their email to “hackers”.  Why is “hackers” in “double quotes”.  I can just imagine some executive at AT&T in their “Oh No, We Messed Up Meeting” saying, what happened?  Then someone replied, well we have had a breach and “hackers” broke in (using the quote in the air gesture) and stole our iPad 3G customers emails. Oh well, I am sure my email has been sold and sold again by many different vendors, why not AT&T now.  At least Dorothy Attwood could have gave us her email to give to someone else instead of blinking it through a newsletter system. June 13, 2010 Dear Valued AT&T Customer, Recently there was an issue that affected some of our customers with AT&T 3G service for iPad resulting in the release of their customer email addresses. I am writing to let you know that no other information was exposed and the matter has been resolved.  We apologize for the incident and any inconvenience it may have caused. Rest assured, you can continue to use your AT&T 3G service on your iPad with confidence. Here’s some additional detail: On June 7 we learned that unauthorized computer “hackers” maliciously exploited a function designed to make your iPad log-in process faster by pre-populating an AT&T authentication page with the email address you used to register your iPad for 3G service.  The self-described hackers wrote software code to randomly generate numbers that mimicked serial numbers of the AT&T SIM card for iPad – called the integrated circuit card identification (ICC-ID) – and repeatedly queried an AT&T web address.   When a number generated by the hackers matched an actual ICC-ID, the authentication page log-in screen was returned to the hackers with the email address associated with the ICC-ID already populated on the log-in screen. The hackers deliberately went to great efforts with a random program to extract possible ICC-IDs and capture customer email addresses.  They then put together a list of these emails and distributed it for their own publicity. As soon as we became aware of this situation, we took swift action to prevent any further unauthorized exposure of customer email addresses.  Within hours, AT&T disabled the mechanism that automatically populated the email address. Now, the authentication page log-in screen requires the user to enter both their email address and their password. I want to assure you that the email address and ICC-ID were the only information that was accessible. Your password, account information, the contents of your email, and any other personal information were never at risk.  The hackers never had access to AT&T communications or data networks, or your iPad.  AT&T 3G service for other mobile devices was not affected. While the attack was limited to email address and ICC-ID data, we encourage you to be alert to scams that could attempt to use this information to obtain other data or send you unwanted email. You can learn more about phishing by visiting the AT&T website. AT&T takes your privacy seriously and does not tolerate unauthorized access to its customers’ information or company websites.   We will cooperate with law enforcement in any investigation of unauthorized system access and to prosecute violators to the fullest extent of the law. AT&T acted quickly to protect your information – and we promise to keep working around the clock to keep your information safe.  Thank you very much for your understanding, and for being an AT&T customer. Sincerely, Dorothy Attwood Senior Vice President, Public Policy and Chief Privacy Officer for AT&T Technorati Tags: AT&T,iPad 3G,Email

  Read the article

• Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Functional/nonfunctional requirements VS design ideas

  - by Nicholas Chow

  Problem domain Functional requirements defines what a system does. Non-Functional requirements defines quality attributes of what the system does as a whole.(performance, security, reliability, volume, useability, etc.) Constraints limits the design space, they restrict designers to certain types of solutions. Solution domain Design ideas , defines how the system does it. For example a stakeholder need might be we want to increase our sales, therefore we must improve the usability of our webshop so more customers will purchase, a requirement can be written for this. (problem domain) Design takes this further into the solution domain by saying "therefore we want to offer credit card payments in addition to the current prepayment option". My problem is that the transition phase from requirement to design seems really vague, therefore when writing requirements I am often confused whether or not I incorporated design ideas in my requirements, that would make my requirement wrong. Another problem is that I often write functional requirements as what a system does, and then I also specify in what timeframe it must be done. But is this correct? Is it then a still a functional requirement or a non functional one? Is it better to seperate it into two distinct requirements? Here are a few requirements I wrote: FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. FR2 Organizer submits a Project FR2 describes the submission of a Project by an Organizer on CrowdFundum - FR2 The system shall display a submit Project form to the Organizer accounts on the website.< - FR2.3 The system shall check for completeness the Name of the Project, 1-3 Photo’s, Keywords of the Project, Punch line, Minimum and maximum amount of people, Funding threshold, One or more reward tiers, Schedule of when what will be organized, Budget plan, 300-800 Words of additional information about the Project, Contact details within 1 secondin after an Organizer submits the submit Project form. - FR2.8 The system shall add to the homepage in the new Projects category the Project link within 30 seconds after the system made a Project webpage - FR2.9 The system shall include in the Project link for the homepage : Name of the Project, 1 Photo, Punch line within 30 seconds after the system made a Project webpage. Questions: FR 1.1 : Have I incorporated a design idea here, would " the system shall have a registration form" be a better functional requirement? F1.2 ,2.3 : Is this not singular? Would the conditions be better written for each its own separate requirement FR 1.4: Is this a design idea? Is this a correct functional requirement or have I incorporated non functional(performance) in it? Would it be better if I written it like this: FR1 The system shall display an error message when check is unsuccessful. NFR: The system will respond to unsuccesful registration form checks within 1 seconds. Same question with FR 2.8 and 2.9. FR2.3: The system shall check for "completeness", is completeness here used ambigiously? Should I rephrase it? FR1.2: I added that the system shall require a "Captcha code" is this a functional requirement or does it belong to the "security aspect" of a non functional requirement. I am eagerly waiting for your response. Thanks!

  Read the article

• Radeon Mobility HD 5470 Not Working

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• How do I get my character to move after adding to JFrame?

  - by A.K.

  So this is kind of a follow up on my other JPanel question that got resolved by playing around with the Layout... Now my MouseListener allows me to add a new Board(); object from its class, which is the actual game map and animator itself. But since my Board() takes Key Events from a Player Object inside the Board Class, I'm not sure if they are being started. Here's my Frame Class, where SideScroller S is the player object: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Button; import java.awt.CardLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; JFrame frm = new JFrame("Action-Packed Jack"); ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel TitlePane = new JPanel(); public JPanel BoardPane = new JPanel(); JPanel cards; JButton StartB = new JButton(StartImg); Board nBoard = new Board(); static Sound nSound; public Frame() { frm.setLayout(new GridBagLayout()); cards = new JPanel(new CardLayout()); nSound = new Sound("/Sounds/BunchaJazz.wav"); TitleL.setPreferredSize(new Dimension(970, 420)); frm.add(TitleL); frm.add(cards); cards.setSize(new Dimension(150, 45)); cards.setLayout(new GridBagLayout ()); cards.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(150, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); frm.pack(); } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { new Frame(); } }); } public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

  - by jessica.ebbelaar

  There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Texture displays on Android emulator but not on device

  - by Rob

  I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

  Read the article

• PCI Encryption Key Management

  - by Unicorn Bob

  (Full disclosure: I'm already an active participant here and at StackOverflow, but for reasons that should hopefully be obvious, I'm choosing to ask this particular question anonymously). I currently work for a small software shop that produces software that's sold commercially to manage small- to mid-size business in a couple of fairly specialized industries. Because these industries are customer-facing, a large portion of the software is related to storing and managing customer information. In particular, the storage (and securing) of customer credit card information. With that, of course, comes PCI compliance. To make a long story short, I'm left with a couple of questions about why certain things were done the way they were, and I'm unfortunately without much of a resource at the moment. This is a very small shop (I report directly to the owner, as does the only other full-time employee), and the owner doesn't have an answer to these questions, and the previous developer is...err...unavailable. Issue 1: Periodic Re-encryption As of now, the software prompts the user to do a wholesale re-encryption of all of the sensitive information in the database (basically credit card numbers and user passwords) if either of these conditions is true: There are any NON-encrypted pieces of sensitive information in the database (added through a manual database statement instead of through the business object, for example). This should not happen during the ordinary use of the software. The current key has been in use for more than a particular period of time. I believe it's 12 months, but I'm not certain of that. The point here is that the key "expires". This is my first foray into commercial solution development that deals with PCI, so I am unfortunately uneducated on the practices involved. Is there some aspect of PCI compliance that mandates (or even just strongly recommends) periodic key updating? This isn't a huge issue for me other than I don't currently have a good explanation to give to end users if they ask why they are being prompted to run it. Question 1: Is the concept of key expiration standard, and, if so, is that simply industry-standard or an element of PCI? Issue 2: Key Storage Here's my real issue...the encryption key is stored in the database, just obfuscated. The key is padded on the left and right with a few garbage bytes and some bits are twiddled, but fundamentally there's nothing stopping an enterprising person from examining our (dotfuscated) code, determining the pattern used to turn the stored key into the real key, then using that key to run amok. This seems like a horrible practice to me, but I want to make sure that this isn't just one of those "grin and bear it" practices that people in this industry have taken to. I have developed an alternative approach that would prevent such an attack, but I'm just looking for a sanity check here. Question 2: Is this method of key storage--namely storing the key in the database using an obfuscation method that exists in client code--normal or crazy? Believe me, I know that free advice is worth every penny that I've paid for it, nobody here is an attorney (or at least isn't offering legal advice), caveat emptor, etc. etc., but I'm looking for any input that you all can provide. Thank you in advance!

  Read the article

• Algorithm design, "randomising" timetable schedule in Python although open to other languages.

  - by S1syphus

  Before I start I should add I am a musician and not a native programmer, this was undertook to make my life easier. Here is the situation, at work I'm given a new csv file each which contains a list of sound files, their length, and the minimum total amount of time they must be played. I create a playlist of exactly 60 minutes, from this excel file. Each sample played the by the minimum number of instances, but spread out from each other; so there will never be a period where for where one sound is played twice in a row or in close proximity to itself. Secondly, if the minimum instances of each song has been used, and there is still time with in the 60 min, it needs to fill the remaining time using sounds till 60 minutes is reached, while adhering to above. The smallest duration possible is 15 seconds, and then multiples of 15 seconds. Here is what I came up with in python and the problems I'm having with it, and as one user said its buggy due to the random library used in it. So I'm guessing a total rethink is on the table, here is where I need your help. Whats is the best way to solve the issue, I have had a brief look at things like knapsack and bin packing algorithms, while both are relevant neither are appropriate and maybe a bit beyond me.

  Read the article

• Android -- Can't play any videos (mp4/mov/3gp/etc.)?

  - by borg17of20

  Hello all, I'm having great difficulty getting my Android application to play videos from the SD card. It doesn't matter what size, bitrate, video format, or any other setting I can think of, neither the emulator nor my G1 will play anything I try to encode. I've also tried a number of videos from the web (various video formats, bitrates, with and without audio tracks, etc.), and none of those work either. All I keep getting is a dialog box that says: "Cannot play video" "Sorry, this video cannot be played." There are errors reported in LogCat, but I don't understand them and I've tried searching the Internet for further explanations without any luck. See below: 03-30 05:34:26.807: ERROR/QCOmxcore(51): OMXCORE API : Free Handle 390d4 03-30 05:34:26.817: ERROR/QCOmxcore(51): Unloading the dynamic library for OMX.qcom.video.decoder.avc 03-30 05:34:26.817: ERROR/PlayerDriver(51): Command PLAYER_PREPARE completed with an error or info PVMFErrNoResources 03-30 05:34:26.857: ERROR/MediaPlayer(14744): error (1, -15)03-30 05:34:26.867: ERROR/MediaPlayer(14744): Error (1,-15) Sometimes I also get this: 03-30 05:49:49.267: ERROR/PlayerDriver(51): Command PLAYER_INIT completed with an error or info PVMFErrResource 03-30 05:49:49.267: ERROR/MediaPlayer(19049): error (1, -17) 03-30 05:49:49.347: ERROR/MediaPlayer(19049): Error (1,-17) Here is the code I'm using (in my onCreate() method): this.setContentView(R.layout.main); //just a simple VideoView loading files from the SD card VideoView myIntroView = (VideoView) this.findViewById(R.id.VideoView01); MediaController mc = new MediaController(this); myIntroView.setMediaController(mc); myIntroView.setVideoPath("/sdcard/test.mp4"); myIntroView.requestFocus(); myIntroView.start(); Please help!

  Read the article

• X509 Certificates, DigitalSignature vs NonRepudiation (C#)

  - by Eyvind

  We have been handed a set of test sertificates on smart cards for developing a solution that requires XML messages to be signed using PKI. Each (physical) smart card seems to have two certificates stored on it. I import them into the Windows certificate store using software supplied by the smart card provider, and then use code resembling the following to iterate over the installed certificates: foreach (X509Certificate2 x509 in CertStore.Certificates) { foreach (X509Extension extension in x509.Extensions) { if (extension.Oid.Value == "one we are interested in") { X509KeyUsageExtension ext = (X509KeyUsageExtension)extension; if ((ext.KeyUsages & X509KeyUsageFlags.DigitalSignature) != X509KeyUsageFlags.None) { // process certs here We have been told to use the certificates that have the NonRepudiation key usage flag set to sign the XMLs. However, the certificate that has the NonRepudiation flag has this flag only, and not for instance the DigitalSignature flag which I check for above. Does this strike anyone but me as slightly odd? I am in other words told to sign with a certificate that does not (appear to) have the DigitalSignature usage flag set. Is this normal procedure? Any comments? Thanks.

  Read the article

• fmod VS2008 unresolved externals in dependant project

  - by Tom J Nowell

  Im currently trying to use the latest stable fmod ex in my project. I have a main executable in a project called engine4, and a project named DX9Platform in the solution as well which ti depends on. All the fmod code is in this DX9Platform project, which generates a lib file. DX9Platform includes fmodex_vc.lib and builds fine. However buildign Engien4 results in unresolved external symbol messages referencing files that use fmod in the DX9Platform project I have tried adding fmodex_vc.lib to the Engine4 project, with no success, how do I fix this? Heres the linker output: 3>------ Build started: Project: Engine4, Configuration: Release Direct3D9 Win32 ------ 3>Linking... 3>DX9PlatformLib.lib(CFmodSound.obj) : error LNK2001: unresolved external symbol _FMOD_System_Create 3>DX9PlatformLib.lib(CFmodSound.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::System::createSound(char const *,unsigned int,struct FMOD_CREATESOUNDEXINFO *,class FMOD::Sound * *)" (?createSound@System@FMOD@@QAE?AW4FMOD_RESULT@@PBDIPAUFMOD_CREATESOUNDEXINFO@@PAPAVSound@2@@Z) 3>DX9PlatformLib.lib(CFmodSound.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::System::getVersion(unsigned int *)" (?getVersion@System@FMOD@@QAE?AW4FMOD_RESULT@@PAI@Z) 3>DX9PlatformLib.lib(CFmodSound.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::System::init(int,unsigned int,void *)" (?init@System@FMOD@@QAE?AW4FMOD_RESULT@@HIPAX@Z) 3>DX9PlatformLib.lib(CFModAudioObject.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::System::playSound(enum FMOD_CHANNELINDEX,class FMOD::Sound *,bool,class FMOD::Channel * *)" (?playSound@System@FMOD@@QAE?AW4FMOD_RESULT@@W4FMOD_CHANNELINDEX@@PAVSound@2@_NPAPAVChannel@2@@Z) 3>DX9PlatformLib.lib(CFModAudioObject.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::Channel::getPaused(bool *)" (?getPaused@Channel@FMOD@@QAE?AW4FMOD_RESULT@@PA_N@Z) 3>DX9PlatformLib.lib(CFModAudioObject.obj) : error LNK2001: unresolved external symbol "public: enum FMOD_RESULT __thiscall FMOD::Channel::setPaused(bool)" (?setPaused@Channel@FMOD@@QAE?AW4FMOD_RESULT@@_N@Z) 3>DX9PlatformLib.lib(CFModAudioObject.obj) : error LNK2001: unresolved external symbol "public: virtual class IAudioObject * __thiscall CFModAudioObject::LoadFile(char const *)" (?LoadFile@CFModAudioObject@@UAEPAVIAudioObject@@PBD@Z) 3>D:\media\desktop\engine4\Engine4\Output\Release Direct3D9\Engine4.exe : fatal error LNK1120: 8 unresolved externals 3>Build log was saved at "file://d:\media\desktop\engine4\Engine4\Engine4\intermediate\Release Direct3D9\BuildLog.htm" 3>Engine4 - 9 error(s), 0 warning(s) ========== Build: 1 succeeded, 1 failed, 0 up-to-date, 1 skipped ==========

  Read the article

• Entlib validation to syntax to accept only numeric month numbers?

  - by ElHaix

  I've got an enum defined as such: Private Enum AllowedMonthNumbers _1 _2 _3 _4 _5 _6 _7 _8 _9 _10 _11 _12 End Enum Then a property validator defined as: <TypeConversionValidator(GetType(Int32), MessageTemplate:="Card expiry month must be numeric.", Ruleset:="CreditCard")> _ <EnumConversionValidator(GetType(AllowedMonthNumbers), MessageTemplate:="Card expiry month must be between 1 and 12.", Ruleset:="CreditCard")> _ The validation expects "_#", as when I remove the TypeConversionValidator, it passes with setting the value to "_3" or any other number in the enum. What I need is for this to only accept b/t 1-12, and simply having numeric values in the enum won't work. Any tips? Thanks. UPDATE I replaced the EnumConversionValidator with a RangeValidator, and attempting to set the parameter to "1", but received the following error: <RangeValidator(1, RangeBoundaryType.Inclusive, 12, RangeBoundaryType.Inclusive, MessageTemplate:="..."> However that's now giving me the following error: System.Web.Services.Protocols.SoapException : System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.ArgumentException: Object must be of type Int32. at System.Int32.CompareTo(Object value) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.RangeChecker`1.IsInRange(T target) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.RangeValidator`1.DoValidate(T objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validator`1.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.AndCompositeValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.ValueAccessValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.AndCompositeValidator.DoValidate(Object objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validators.GenericValidatorWrapper`1.DoValidate(T objectToValidate, Object currentTarget, String key, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validator`1.Validate(T target, ValidationResults validationResults) at Microsoft.Practices.EnterpriseLibrary.Validation.Validation.Validate[T](T target, String[] rulesets) at ....

  Read the article

• How do I play back a WAV in ActionScript?

  - by Jeremy White

  Please see the class I have created at http://textsnip.com/51013f for parsing a WAVE file in ActionScript 3.0. This class is correctly pulling apart info from the file header & fmt chunks, isolating the data chunk, and creating a new ByteArray to store the data chunk. It takes in an uncompressed WAVE file with a format tag of 1. The WAVE file is embedded into my SWF with the following Flex embed tag: [Embed(source="some_sound.wav", mimeType="application/octet-stream")] public var sound_class:Class; public var wave:WaveFile = new WaveFile(new sound_class()); After the data chunk is separated, the class attempts to make a Sound object that can stream the samples from the data chunk. I'm having issues with the streaming process, probably because I'm not good at math and don't really know what's happening with the bits/bytes, etc. Here are the two documents I'm using as a reference for the WAVE file format: http://www.lightlink.com/tjweber/StripWav/Canon.html https://ccrma.stanford.edu/courses/422/projects/WaveFormat/ Right now, the file IS playing back! In real time, even! But...the sound is really distorted. What's going on?

  Read the article

• weird swing heavyweight object lightweight objects problem

  - by Yoav Schwartz

  Hello, We have a problem in our swing based application since we've upgraded our java version from 6u5 to 6u18 (The application runs over WinXP). Our application contains a Canvas object which resides in a JFrame. The application draws things on the canvas. Every time we drag a lightweight swing object (popup or another frame) over the canvas, it has a refresh problem. It blinks - becomes black. The problem only resolves after we move the swing component away from the canvas and click on it again. We think this problem is related to the fact the the canvas is a heavyweight object. And we know there were changes done in the new versions of java on the mixing of heavyweight and lightweight objects issue. Some more details: 1) Our problem reproduces in java 6u14 and 6u16. 2) Everything works fine in java 6u5. Another strange thing: We have 2 types of stations running our application. The first type has a ATI FireGL7100 PCI-E graphics card. The second type has a Matrox G450 PCI graphic card. The problem does not reproduce on the Matrox based station in any java version. One more thing: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6829858 - looks similar to our problem. Is our problem familiar? Do you have any suggestions (workarounds, ideas how the difference in graphics cards is connected to this problem) Hope I was clear enough, Yoav

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >