Search Results

Search found 4462 results on 179 pages for 'ssh'.

Page 168/179 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • VMWare server: virtual machine start-up reaches 95% and hangs

    - by Magsol
    This problem cropped up today, after updating my eVGA motherboard's chipset in order to try and fix an unrelated issue. After installing the chipset update (contained SATA and Ethernet drivers), every time I've tried to start my Ubuntu VM, it reaches 95% in the web interface and then just hangs. I'm using VMWare Server 2.0.2, running it within Windows 7 64-bit. I haven't had any issues up until now, and I suspect it has something to do with the chipset update. I've already tried reinstalling VMWare itself, removing the VM from the inventory and re-adding it, and neither has proved successful. I'm also not sure how to kill the VMware server process itself once the start-up hangs; I've only been able to try again by rebooting (as none of the VMWare Services listed kill the server process itself). Any insights? Edit: Uhhh...as an addendum: I have a cron job set up on my Ubuntu VM that runs every 20 minutes. The VM is still listed in the VMWare web interface as at 95% of startup, and the start/stop buttons are still disabled, but the cronjob just ran. I also tested SSH, and I was able to tunnel into the Ubuntu VM as well. Now I'm really confused. Edit #2: I just started a thread on the VMWare Server support forums on this same topic. Hopefully between the two communities, we can come up with an answer: http://communities.vmware.com/thread/251033 Edit #3: In lieu of a specific fix, I've switched over to VirtualBox, and all is working just fine.

    Read the article

  • BYOD (accessing files) on a domain without joining?

    - by Philip White
    I run a Samba 4 instance at a small private school. This makes a regular Linux server appear as a directory controller. There are two relevant benefits to this: I have a Samba share for people's documents, and I use the Redirected Folders feature to allow any employee to sit down at any PC, log in with their domain credentials, and their My Documents points to network storage. Everyone has a mapped drive (using Group Policy Preferences) to a share specific to their account type. Students can access one share (one share for all students), teachers have another, and office staff have another. However, I would like to allow BYOD (Bring Your Own Device). Some employees are already asking for it with their personal laptops, and I know eventually most everyone will want to. Is there any way to replicate the two features above without having to join PCs to the domain? Joining personal PCs is impractical if only because only professional editions of Windows support this. Ideally, any operating system (including mobile) could access the relevant shares, but of course Windows is key. Offline caching is optional. (I could set up OpenVPN for teachers who want to access their files from home.) The problem with simply giving SSH access to the relevant shares is primarily that Samba 4 relies on ext4 ACLs and ext4 extended attributes to maintain NTFS permissions. Writing files directly to the Linux server would bypass this and would (probably) not be interoperable with Samba4. Right now I am completely flexible. I am even fine with scrapping the whole domain and using some other software for the two features above. How can I allow school employees and students freedom to securely share files without requiring everyone to have specific editions of Windows?

    Read the article

  • Weird vps server issue

    - by anon-user0
    I have an unmanaged linux vps Ubuntu 11.10 (Oneiric Ocelot). I have LNMP installed. Also php-fpm php-apc, varnish, memcache. I have (or rather had) several live sites on it. under normal load the server uses ~700 mb memory. But since last night its using only 20mb~ memory and a lot of the services seems to be down (according to htop) I only see nginx working and mysql starts up and goes does every few minutes on a loop. Here are some information on the server that might help you help me: root@server:~# uname -a Linux server 2.6.18-308.el5.028stab099.3 #1 SMP Wed Mar 7 15:56:00 MSK 2012 i686 i686 i386 GNU/Linux - root@server:~# ifconfig -a lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:12515 errors:0 dropped:0 overruns:0 frame:0 TX packets:9541 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7191214 (7.1 MB) TX bytes:536726 (536.7 KB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:176.31.158.78 P-t-P:176.31.158.78 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 - root@server:~# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:http-alt *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp6 0 0 [::]:http-alt [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 9307368 @/com/ubuntu/upstart - htop: http://i.stack.imgur.com/NHKYX.png EDIT: Stressed. mind was not working adding log: root@server:~# less /var/log/syslog Jun 27 05:27:42 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 05:39:01 server CRON[9298]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 05:40:01 server CRON[9463]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 05:46:21 server sm-msp-queue[9480]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:19:14, xdelay=00:06:18, mailer=relay, pri=122407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 05:52:39 server sm-msp-queue[9480]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:06:32, xdelay=00:06:18, mailer=relay, pri=842407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:00:01 server CRON[15671]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:06:22 server sm-msp-queue[15690]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:39:15, xdelay=00:06:18, mailer=relay, pri=212407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:09:01 server CRON[18114]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 06:12:40 server sm-msp-queue[15690]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:26:33, xdelay=00:06:18, mailer=relay, pri=932407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:20:02 server CRON[21888]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:26:22 server sm-msp-queue[21907]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:59:15, xdelay=00:06:18, mailer=relay, pri=302407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:27:02 server CRON[24021]: (root) CMD (cd / && run-parts --report /etc/cron.hourly) Jun 27 06:32:40 server sm-msp-queue[21907]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:46:33, xdelay=00:06:18, mailer=relay, pri=1022407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:39:01 server CRON[27941]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 06:40:02 server CRON[28110]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:46:22 server sm-msp-queue[28125]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=01:19:15, xdelay=00:06:18, mailer=relay, pri=392407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:52:40 server sm-msp-queue[28125]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:06:33, xdelay=00:06:18, mailer=relay, pri=1112407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:52:40 server sm-msp-queue[28125]: q5QMk7S9009582: q5R2e4uo028125: sender notify: Warning: could not send message for past 4 hours Jun 27 06:52:44 server sm-msp-queue[28125]: q5R2e4uo028125: to=root, delay=00:00:04, xdelay=00:00:04, mailer=relay, pri=33690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:00:02 server CRON[1543]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 07:06:21 server sm-msp-queue[1560]: q5R2e4uo028125: to=root, delay=00:13:41, xdelay=00:06:18, mailer=relay, pri=123690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:09:01 server CRON[3986]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 07:12:39 server sm-msp-queue[1560]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=01:45:32, xdelay=00:06:18, mailer=relay, pri=482407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:18:57 server sm-msp-queue[1560]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:32:50, xdelay=00:06:18, mailer=relay, pri=1202407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:20:02 server CRON[7760]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 07:26:22 server sm-msp-queue[7775]: q5R2e4uo028125: to=root, delay=00:33:42, xdelay=00:06:18, mailer=relay, pri=213690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:27:01 server CRON[9887]: (root) CMD (cd / && run-parts --report /etc/cron.hourly) Jun 27 07:32:40 server sm-msp-queue[7775]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=02:05:33, xdelay=00:06:18, mailer=relay, pri=572407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:38:58 server sm-msp-queue[7775]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:52:51, xdelay=00:06:18, mailer=relay, pri=1292407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:39:01 server CRON[13813]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth : root@server:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/simfs 20G 2.3G 18G 12% / - Jun 26 16:22:41 server varnishd[1413]: Child (32425) died signal=3 Jun 26 16:22:41 server varnishd[1413]: child (21687) Started Jun 26 16:22:41 server varnishd[1413]: Child (21687) said Child starts Jun 26 16:22:41 server varnishd[1413]: Child (21687) said SMF.s0 mmap'ed 1073741824 bytes of 1073741824 Jun 26 16:34:28 server -- MARK -- Jun 26 16:54:29 server -- MARK -- Jun 26 17:14:29 server -- MARK -- Jun 26 17:34:29 server -- MARK -- Jun 26 17:54:29 server -- MARK -- Jun 26 18:14:29 server -- MARK -- Jun 26 18:34:29 server -- MARK -- Jun 26 18:54:29 server -- MARK -- Jun 26 19:14:29 server -- MARK -- Jun 26 19:34:29 server -- MARK -- Jun 26 19:54:29 server -- MARK -- Jun 26 20:14:29 server -- MARK -- Jun 26 20:34:29 server -- MARK -- Jun 26 20:48:12 server exiting on signal 15 Jun 26 20:51:58 server syslogd 1.5.0#6ubuntu1: restart. Jun 26 20:52:01 server varnishd[1324]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 26 21:11:58 server -- MARK -- Jun 26 21:31:58 server -- MARK -- Jun 26 21:51:58 server -- MARK -- Jun 26 22:11:58 server -- MARK -- Jun 26 22:31:58 server -- MARK -- Jun 26 22:51:58 server -- MARK -- Jun 26 23:11:58 server -- MARK -- Jun 26 23:31:58 server -- MARK -- Jun 26 23:51:58 server -- MARK -- Jun 27 00:11:58 server -- MARK -- Jun 27 00:23:42 server exiting on signal 15 Jun 27 02:21:10 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 02:21:12 server varnishd[1341]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 02:41:10 server -- MARK -- Jun 27 02:46:41 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:20:44 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:20:46 server varnishd[1238]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 03:20:46 server varnishd[1238]: child (1239) Started Jun 27 03:20:46 server varnishd[1238]: Child (1239) said Child starts Jun 27 03:20:46 server varnishd[1238]: Child (1239) said SMF.s0 mmap'ed 1073741824 bytes of 1073741824 Jun 27 03:32:52 server exiting on signal 15 Jun 27 03:33:16 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:33:31 server varnishd[1372]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 03:53:16 server -- MARK -- Jun 27 04:13:16 server -- MARK -- Jun 27 04:33:16 server -- MARK -- Jun 27 04:53:16 server -- MARK -- Jun 27 05:13:16 server -- MARK -- Jun 27 05:27:42 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 05:53:17 server -- MARK -- Jun 27 06:13:17 server -- MARK -- Jun 27 06:33:17 server -- MARK -- Jun 27 06:53:17 server -- MARK -- Jun 27 07:13:17 server -- MARK -- Jun 27 07:33:17 server -- MARK -- Jun 27 07:53:17 server -- MARK -- Jun 27 08:13:17 server -- MARK -- Jun 27 08:33:17 server -- MARK -- Jun 27 08:53:17 server -- MARK -- Jun 27 09:13:17 server -- MARK -- Jun 27 09:33:17 server -- MARK -- Jun 27 09:53:17 server -- MARK -- Jun 27 10:13:17 server -- MARK -- Jun 27 10:33:17 server -- MARK -- Jun 27 10:53:17 server -- MARK -- Jun 27 11:13:17 server -- MARK -- Jun 27 11:33:17 server -- MARK -- Jun 27 11:53:18 server -- MARK -- Jun 27 12:13:18 server -- MARK -- Jun 27 12:33:18 server -- MARK -- Jun 27 12:53:18 server -- MARK -- Jun 27 13:13:18 server -- MARK -- Jun 27 13:33:18 server -- MARK -- Jun 27 13:53:18 server -- MARK -- Jun 27 14:13:18 server -- MARK -- Jun 27 14:33:18 server -- MARK -- Jun 27 14:53:18 server -- MARK -- -- root@server:~# cat /var/log/nginx/error.log 2012/06/27 03:32:54 [alert] 1199#0: worker process 1203 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1200 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1201 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1202 exited on signal 9 root@server:~# cat /var/log/nginx/access.log 31.210.99.87 - - [27/Jun/2012:09:09:08 +0400] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 172 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /cms/cmx.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /iesvc/iesvc.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /cmd2/index.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:09 +0400] "GET /cmd/index.jsp HTTP/1.1" 301 184 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:19 +0400] "GET / HTTP/1.1" 301 184 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.56 Safari/536.5" 58.97.147.197 - - [27/Jun/2012:17:17:37 +0400] "GET / HTTP/1.1" 301 184 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.56 Safari/536.5" 58.97.147.197 - - [27/Jun/2012:17:17:38 +0400] "-" 400 0 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:38 +0400] "-" 400 0 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:48 +0400] "-" 400 0 "-" "-" - root@server:~# cat /var/log/daemon.log Jun 26 20:48:10 server xinetd[1177]: Exiting... Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=28] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=26] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=25] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=26] Jun 26 20:51:58 server xinetd[1174]: removing chargen Jun 26 20:51:58 server xinetd[1174]: removing chargen Jun 26 20:51:58 server xinetd[1174]: removing daytime Jun 26 20:51:58 server xinetd[1174]: removing daytime Jun 26 20:51:58 server xinetd[1174]: removing discard Jun 26 20:51:58 server xinetd[1174]: removing discard Jun 26 20:51:58 server xinetd[1174]: removing echo Jun 26 20:51:58 server xinetd[1174]: removing echo Jun 26 20:51:58 server xinetd[1174]: removing time Jun 26 20:51:58 server xinetd[1174]: removing time Jun 26 20:51:58 server xinetd[1174]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Jun 26 20:51:58 server xinetd[1174]: Started working: 0 available services Jun 26 20:52:01 server vnstatd[1330]: vnStat daemon 1.11 started. Jun 26 20:52:01 server vnstatd[1330]: Monitoring: venet0 Jun 27 00:23:41 server xinetd[1174]: Exiting... Jun 27 02:21:12 server vnstatd[1349]: vnStat daemon 1.11 started. Jun 27 02:21:12 server vnstatd[1349]: Monitoring: venet0 Jun 27 03:20:44 server xinetd[1166]: attribute: disable should not be in default section [file=/etc/xinetd.conf] [line=12] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=15] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=28] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=26] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=25] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=26] Jun 27 03:20:44 server xinetd[1166]: removing chargen Jun 27 03:20:44 server xinetd[1166]: removing chargen Jun 27 03:20:44 server xinetd[1166]: removing daytime Jun 27 03:20:44 server xinetd[1166]: removing daytime Jun 27 03:20:44 server xinetd[1166]: removing discard Jun 27 03:20:44 server xinetd[1166]: removing discard Jun 27 03:20:44 server xinetd[1166]: removing echo Jun 27 03:20:44 server xinetd[1166]: removing echo Jun 27 03:20:44 server xinetd[1166]: removing time Jun 27 03:20:44 server xinetd[1166]: removing time Jun 27 03:20:44 server xinetd[1166]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Jun 27 03:20:44 server xinetd[1166]: Started working: 0 available services Jun 27 03:20:46 server vnstatd[1249]: vnStat daemon 1.11 started. Jun 27 03:20:46 server vnstatd[1249]: Monitoring: venet0 Jun 27 03:32:41 server xinetd[1166]: Exiting... Jun 27 03:33:32 server vnstatd[1380]: vnStat daemon 1.11 started. Jun 27 03:33:32 server vnstatd[1380]: Monitoring: venet0 root@server:~# - Anything else you need let me know

    Read the article

  • Inspire Geek Love with These Hilarious Geek Valentines

    - by Eric Z Goodnight
    Want to send some Geek Love to that special someone? Why not do it with these elementary school throwback valentines, and win their heart this upcoming Valentine’s day—the geek way! Read on to see the simple method to make your own custom Valentines, as well as download a set of eleven ready-made ones any geek guy or gal should be delighted get. It’s amore! How to Make Custom Valentines A size we’ve used for all of our Valentines is a 3” x 4” at 150 dpi. This is fairly low resolution for print, but makes a great graphic to email. With your new image open, Navigate to Edit > Fill and fill your background layer with a rich, red color (or whatever appeals to you.) By setting “Use” to “Foreground color as shown above, you’ll paint whatever foreground color you have in your color picker. Press to select the text tool. Set a few text objects, using whatever fonts appeal to you. Pixel fonts, like this one, are freely downloadable, and we’ve already shared a great list of Valentines fonts. Copy an image from the internet if you’re confident your sweetie won’t mind a bit of fair use of copyrighted imagery. If they do mind, find yourself some great Creative Commons images. to do a free transform on your image, sizing it to whatever dimensions work best for your design. Right click your newly added image layer in your panel and Choose “Blending Effects” to pick a Layer Style. “Stroke” with this setting adds a black line around your image. Also turning on “Outer Glow” with this setting puts a dark black shadow around the top and bottom (and sides, although they are hidden). Add some more text. Double entendre is recommended. Click and hold down on the “Rectangle Tool” to get the “Custom Shape Tool.” The custom shape tool has useful vector shapes built into it. Find the “Shape” dropdown in the menu to find the heart image. Click and drag to create a vector heart shape in your image. Your layers panel is where you can change the color, if it happens to use the wrong one at first. Click the color swatch in your panel, highlighted in blue above. will transform your vector heart. You can also use it to rotate, if you like. Add some details, like this Power or Standby symbol, which can be found in symbol fonts, taken from images online, or drawn by hand. Your Valentine is now ready to be saved as a JPG or PNG and sent to the object of your affection! Keep reading to see a list of 11 downloadable How-To Geek Valentines, including this one and the three from the header image. Download The HTG Set of Valentines Download the HTG Geek Valentines (ZIP) Download the HTG Geek Valentines (ZIP) When he’s not wooing ladies with Valentines cards, you can email the author at [email protected] with your Photoshop and Graphics questions. Your questions may be featured in a future How-To Geek article! Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

    Read the article

  • Closer look at the SOA 12c Feature: Oracle Managed File Transfer

    - by Tshepo Madigage-Oracle
    The rapid growth of cloud-based applications in the enterprise, combined with organizations' desire to integrate applications with mobile technologies, is dramatically increasing application integration complexity. To meet this challenge, Oracle introduced Oracle SOA Suite 12c, the latest version of the industry's most complete and unified application integration and SOA solution. With simplified cloud, mobile, on-premises, and Internet of Things (IoT) integration capabilities, all within a single platform, Oracle SOA Suite 12c helps organizations speed time to integration, improve productivity, and lower TCO. To extend its B2B solution capabilities with Oracle SOA Suite 12c, Oracle unveiled Oracle Managed File Transfer, an integrated solution that enables organizations to virtually eliminate file transfer complexities. This allows customers to load data securely into Oracle Cloud applications as well as third-party cloud or partner applications. Oracle Managed File Transfer (Oracle MFT) enables secure file exchange and management with internal departments and external partners. It protects against inadvertent access to unsecured files at every step in the end-to-end transfer of files. It is easy to use especially for non technical staff so you can leverage more resources to manage the transfer of files. The extensive reporting capabilities allow you to get quick status of a file transfer and resubmit it as required. You can protect data in your DMZ by using the SSH/FTP reverse proxy. Oracle Managed File Transfer can help integrate applications by transferring files between them in complex use case patterns. Standalone: Transferring files on its own using embedded FTP and sFTP servers and the file systems to which it has access. SOA Integration: a SOA application can be the source or target of a transfer. A SOA application can also be the common endpoint for the target of one transfer and the source of another. B2B Integration: B2B application can be the source or target of a transfer. A B2B application can also be the common endpoint for the target of one transfer and the source of another. Healthcare Integration:  Healthcare application can be the source or target of a transfer. A Healthcare application can also be the common endpoint for the target of one transfer and the source of another. Oracle Service Bus (OSB) integration: OMT can integrate with Oracle Service Bus web service interfaces. OSB interface can be the source or target of a transfer. An Oracle Service Bus interface can also be the common endpoint for the target of one transfer and the source of another. Hybrid Integration: can be one participant in a web of data transfers that includes multiple application types. Oracle Managed File Transfers has four user roles: file handlers, designers, monitors, and administrators. File Handlers: - Copy files to file transfer staging areas, which are called sources. - Retrieve files from file transfer destinations, which are called targets. Designers: - Create, read, update and delete file transfer sources. - Create, read, update and delete file transfer targets. - Create, read, update and delete transfers, which link sources and targets in complete file delivery flows. - Deploy and test transfers. Monitors: - Use the Dashboard and reports to ensure that transfer instances are successful. - Pause and resume lengthy transfers. - Troubleshoot errors and resubmit transfers. - View artifact deployment details and history. - View artifact dependence relationships. - Enable and disable sources, targets, and transfers. - Undeploy sources, targets, and transfers. - Start and stop embedded FTP and sFTP servers. Administrators: - All file handler tasks - All designer tasks - All monitor tasks - Add other users and determine their roles - Configure user directory permissions - Configure the Oracle Managed File Transfer server - Configure embedded FTP and sFTP servers, including security - Configure B2B and Healthcare domains - Back up and restore the Oracle Managed File Transfer configuration - Purge transferred files and instance data - Archive and restore instance data and payloads - Import and export metadata You will find all the related information about SOA 12.1.3. Oracle Manages File Transfer OMT in the documentation: Using Oracle Manages File Transfer Resources and links: Oracle Unveils Oracle SOA Suite 12c Oracle Managed Files Transfer Oracle Managed Files Transfer SOA 12c White Paper For further enquiries don't hesitate to contact us at [email protected] and join our Partner Webcast on Oracle SOA Suite 12c

    Read the article

  • FFmpeg Video Hosting for Linux and Windows Server

    - by Aditi
    FFmpeg hosting is a special type of web hosting where the host servers have video transcoding software loaded on them, which allows the automatic conversion of videos from one format to another. FFmpeg is a cross-platform solution for recording, converting, transcoding and stream audio and video. It includes libavcodec – the leading audio/video codec library. FFmpeg hosting gets its name from a set of server side programs (modules) called FFmpeg. There are a number of applications or web scripts available, which allow webmasters to create their own video sharing websites. Video hosting typically requires: PHP 4.3 and above (including support of CLI) Mencoder and also Mplayer FFMpeg-PHP MySQL database server LAME MP3 Encoder Libogg + Libvorbis GD Library 2 or higher CGI-BIN There are number of web service providers who provide FFmpeg hosting service. Following is a list of some of the Best FFmpeg hosting providers for both Linux and Windows Server below. Dream Host Dreamhost provides for web based email access, mail filtering, spam filtering, unlimited email ids, vacation autoresponder, python support, full CGI access and many more services. Price: $7.95 View Details Micfo It offers unlimited disk space and bandwidth. Other services include free domain for life and free Website Transfer with many more services. All in all one of the best option to consider. Price: $5 View Details Host Upon HostUpon offers FFMpeg Hosting on all their hosting packages, with readily installed modules to start a Video website or Social Network with Video uploading. These scripts such as Boonex Dolphin / PHPMotion / Social Engine / ABKsoft Scripts / Joomla Video Plugin / Clipshare / ClipBucket / Social Media / Rayzz / Vidi Script work with their ffmpeg. Their FFMPEG hosting plan offers 24/7/365 support with typical response time of 15min or less. Price: $5.95 View Details DownTown Host DownTown Host provides full and exceptional support by live chat and telephone. It has high-power, modern servers and the finest web server technology. It offers free search engine Submission and continuous data backup protection with free email forwarding and site move. There are many more services too. Site5 This ffmpeg service provider offers uptime guarantee, a real time stats on each server and many more attractive services. Price: $4.95 View Details Cirtex Hosting Cirtex Hosting allows to host 7 websites & domains and provides for unlimited storage space and monthly bandwidth. It also offers FTP and email accounts and many more services. Price: $2.49 View Details FLV Hosting FLV hosting supplies RTMP SERVER STREAMING for large size video streaming and server side recording. It is flexible and costs less. They customize to the clients requirements. Price: $9.95 View Details AptHost This hosting service provides for 24x7x365 Premium Support and fully ffmpeg enabled services. Price: $4.95 View Details HostMDS Great Support, Priced Low. It provides for SSH access, CGI, Ruby on Rails, Perl, PHP, MySQL, front page extentions, 24/7 Support, FREE Domain transfer and spam filtering. It offers instant account setup, low latency fast bandwidth & much more! They were formerly known as Vistapages. Price: $4.95 View Details Related posts:Best WordPress Video Themes for a Video Blog Free Web Based Applications 24+ Coda Alternatives for Windows and Linux

    Read the article

  • ls -l freezes terminal locally and remotely

    - by Jakobud
    I've been reading other SF threads regarding ls not returning results or freezing and stalling terminal sessions and it appears they usually the fault of network problems. My problem however, occurs both over remote SSH sessions but also if I am physically at the server itself... I just installed CentOS 5.4 on one of our servers. I'm setting up some rdiff-backup scripts and when I downloaded librsync and untared it, thats when I started seeing some weird behavior with ls -l. wget http://sourceforge.net/projects/librsync/files/librsync/0.9.7/librsync-0.9.7.tar.gz/download /tmp cd /tmp tar -xzf librsync-0.9.7.tar.gz Simple enough. To view the files in this directory I did this: ls results: librsync-0.9.7 librsync-0.9.7.tar.gz Now, if I ls -l, my terminal freezes. I have to re-ssh in to keep going. After reading SF threads, I thought it was network related. So I was extremely surprised to go sit down at the server itself and see the exact same thing happen... So its obviously not a network issues. Even if I ls /tmp/librsync-0.9.7, my terminal freezes just the same... Next I did an strace and got this (warning: wall of text coming....): strace ls -l /tmp execve("/bin/ls", ["ls", "-l", "/tmp"], [/* 21 vars */]) = 0 brk(0) = 0x1c521000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc0000 uname({sys="Linux", node="massive.answeron.com", ...}) = 0 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b8582cc1000 close(3) = 0 open("/lib64/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \"\200\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=53448, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd3000 mmap(0x30bb800000, 2132936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bb800000 mprotect(0x30bb807000, 2097152, PROT_NONE) = 0 mmap(0x30bba07000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x30bba07000 close(3) = 0 open("/lib64/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\31@\2740\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=28008, ...}) = 0 mmap(0x30bc400000, 2120992, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bc400000 mprotect(0x30bc406000, 2093056, PROT_NONE) = 0 mmap(0x30bc605000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0x30bc605000 close(3) = 0 open("/lib64/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`E\300\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=95464, ...}) = 0 mmap(0x30bbc00000, 2192784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bbc00000 mprotect(0x30bbc15000, 2097152, PROT_NONE) = 0 mmap(0x30bbe15000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x30bbe15000 mmap(0x30bbe17000, 1424, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bbe17000 close(3) = 0 open("/lib64/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\332\201\2720\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1717800, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd4000 mmap(0x30ba800000, 3498328, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30ba800000 mprotect(0x30ba94d000, 2097152, PROT_NONE) = 0 mmap(0x30bab4d000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14d000) = 0x30bab4d000 mmap(0x30bab52000, 16728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bab52000 close(3) = 0 open("/lib64/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220W\0\2730\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=145824, ...}) = 0 mmap(0x30bb000000, 2204528, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bb000000 mprotect(0x30bb016000, 2093056, PROT_NONE) = 0 mmap(0x30bb215000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x30bb215000 mmap(0x30bb217000, 13168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bb217000 close(3) = 0 open("/lib64/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\17\300\2750\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=17888, ...}) = 0 mmap(0x30bdc00000, 2110728, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bdc00000 mprotect(0x30bdc04000, 2093056, PROT_NONE) = 0 mmap(0x30bde03000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x30bde03000 close(3) = 0 open("/lib64/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\16\300\2720\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=23360, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd5000 mmap(0x30bac00000, 2109696, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bac00000 mprotect(0x30bac02000, 2097152, PROT_NONE) = 0 mmap(0x30bae02000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x30bae02000 close(3) = 0 open("/lib64/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0=\0\2740\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=247496, ...}) = 0 mmap(0x30bc000000, 2383136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x30bc000000 mprotect(0x30bc03b000, 2097152, PROT_NONE) = 0 mmap(0x30bc23b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3b000) = 0x30bc23b000 mmap(0x30bc23c000, 40224, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30bc23c000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd6000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cd7000 arch_prctl(ARCH_SET_FS, 0x2b8582cd6c50) = 0 mprotect(0x30bba07000, 4096, PROT_READ) = 0 mprotect(0x30bab4d000, 16384, PROT_READ) = 0 mprotect(0x30bb215000, 4096, PROT_READ) = 0 mprotect(0x30ba61b000, 4096, PROT_READ) = 0 mprotect(0x30bae02000, 4096, PROT_READ) = 0 munmap(0x2b8582cc1000, 71746) = 0 set_tid_address(0x2b8582cd6ce0) = 24102 set_robust_list(0x2b8582cd6cf0, 0x18) = 0 futex(0x7fff72d02d6c, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x30bb005370, [], SA_RESTORER|SA_SIGINFO, 0x30bb00e7c0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x30bb0052b0, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x30bb00e7c0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0 access("/etc/selinux/", F_OK) = 0 brk(0) = 0x1c521000 brk(0x1c542000) = 0x1c542000 open("/etc/selinux/config", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=448, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc1000 read(3, "# This file controls the state o"..., 4096) = 448 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b8582cc1000, 4096) = 0 open("/proc/mounts", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b8582cc1000 read(3, "rootfs / rootfs rw 0 0\n/dev/root"..., 4096) = 577 close(3) = 0 munmap(0x2b8582cc1000, 4096) = 0 open("/selinux/mls", O_RDONLY) = 3 read(3, "1", 19) = 1 close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 connect(3, {sa_family=AF_FILE, path="/var/run/setrans/.setrans-unix"...}, 110) = 0 sendmsg(3, {msg_name(0)=NULL, msg_iov(5)=[{"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\0", 1}, {"\0", 1}], msg_controllen=0, msg_flags=0}, MSG_NOSIGNAL) = 14 readv(3, [{"\1\0\0\0", 4}, {"\1\0\0\0", 4}, {"\0\0\0\0", 4}], 3) = 12 readv(3, [{"\0", 1}], 1) = 1 close(3) = 0 open("/usr/lib/locale/locale-archive", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=56413824, ...}) = 0 mmap(NULL, 56413824, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b8582cd8000 close(3) = 0 ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=65, ws_col=137, ws_xpixel=0, ws_ypixel=0}) = 0 open("/usr/share/locale/locale.alias", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2528, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "# Locale name alias data base.\n#"..., 4096) = 2528 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/usr/share/locale/en_US.UTF-8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_TIME/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) lstat("/tmp", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=4096, ...}) = 0 getxattr("/tmp", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=1711, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1711 read(3, "", 4096) = 0 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b85862a5000 close(3) = 0 open("/lib64/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\37\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=53880, ...}) = 0 mmap(NULL, 2139432, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2b85862b7000 mprotect(0x2b85862c1000, 2093056, PROT_NONE) = 0 mmap(0x2b85864c0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x2b85864c0000 close(3) = 0 mprotect(0x2b85864c0000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl(3, F_GETFD) = 0 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 fstat(3, {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1823 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl(3, F_GETFD) = 0 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 fstat(3, {st_mode=S_IFREG|0644, st_size=743, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 743 close(3) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/tmp", O_RDONLY|O_NONBLOCK|O_DIRECTORY) = 3 fcntl(3, F_SETFD, FD_CLOEXEC) = 0 getdents(3, /* 8 entries */, 32768) = 264 lstat("/tmp/librsync-0.9.7.tar.gz", {st_mode=S_IFREG|0644, st_size=453802, ...}) = 0 getxattr("/tmp/librsync-0.9.7.tar.gz", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp/librsync-0.9.7.tar.gz", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) lstat("/tmp/librsync-0.9.7", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 getxattr("/tmp/librsync-0.9.7", "system.posix_acl_access", 0x0, 0) = -1 ENODATA (No data available) getxattr("/tmp/librsync-0.9.7", "system.posix_acl_default", 0x0, 0) = -1 ENODATA (No data available) open("/etc/passwd", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1823 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2b85862a5000 close(4) = 0 open("/lib64/libnss_ldap.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300r\4\0\0\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=3169960, ...}) = 0 mmap(NULL, 5329912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x2b85864c2000 mprotect(0x2b858679e000, 2093056, PROT_NONE) = 0 mmap(0x2b858699d000, 176128, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x2db000) = 0x2b858699d000 mmap(0x2b85869c8000, 62456, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2b85869c8000 close(4) = 0 open("/lib64/libcom_err.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\n\300\2770\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=10000, ...}) = 0 mmap(0x30bfc00000, 2103048, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30bfc00000 mprotect(0x30bfc02000, 2093056, PROT_NONE) = 0 mmap(0x30bfe01000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x1000) = 0x30bfe01000 close(4) = 0 open("/lib64/libkeyutils.so.1", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\n@\2760\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=9472, ...}) = 0 mmap(0x30be400000, 2102416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30be400000 mprotect(0x30be402000, 2093056, PROT_NONE) = 0 mmap(0x30be601000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x1000) = 0x30be601000 close(4) = 0 open("/lib64/libresolv.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\2402\0\2760\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=92736, ...}) = 0 mmap(0x30be000000, 2181864, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x30be000000 mprotect(0x30be011000, 2097152, PROT_NONE) = 0 mmap(0x30be211000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x11000) = 0x30be211000 mmap(0x30be213000, 6888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x30be213000 close(4) = 0 mprotect(0x30be211000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 rt_sigaction(SIGPIPE, {0x1, [], SA_RESTORER, 0x30ba8302d0}, {SIG_DFL, [], 0}, 8) = 0 geteuid() = 0 futex(0x2b85869c7708, FUTEX_WAKE_PRIVATE, 2147483647) = 0 open("/etc/ldap.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# @(#)$Id: ldap.conf,v 1.38 2006"..., 4096) = 4096 read(4, "Use the OpenLDAP password change"..., 4096) = 4096 read(4, " OpenLDAP 2.0 and earlier is \"no"..., 4096) = 927 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 uname({sys="Linux", node="massive.answeron.com", ...}) = 0 open("/etc/resolv.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=107, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "; generated by /sbin/dhclient-sc"..., 4096) = 107 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 open("/etc/host.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=17, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "order hosts,bind\n", 4096) = 17 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 futex(0x30bab54d44, FUTEX_WAKE_PRIVATE, 2147483647) = 0 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=71746, ...}) = 0 mmap(NULL, 71746, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2b85862a5000 close(4) = 0 open("/lib64/libnss_dns.so.2", O_RDONLY) = 4 read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0\0\0\0\0\0"..., 832) = 832 fstat(4, {st_mode=S_IFREG|0755, st_size=23736, ...}) = 0 mmap(NULL, 2113792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x2b85869d8000 mprotect(0x2b85869dc000, 2093056, PROT_NONE) = 0 mmap(0x2b8586bdb000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3000) = 0x2b8586bdb000 close(4) = 0 mprotect(0x2b8586bdb000, 4096, PROT_READ) = 0 munmap(0x2b85862a5000, 71746) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 823870}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "C\v\1\0\0\1\0\0\0\0\0\0\7massive\10answeron\3co"..., 38, MSG_NOSIGNAL, NULL, 0) = 38 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [122]) = 0 recvfrom(4, "C\v\205\200\0\1\0\1\0\2\0\2\7massive\10answeron\3co"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 122 close(4) = 0 open("/etc/openldap/ldap.conf", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=335, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "#\n# LDAP Defaults\n#\n\n# See ldap."..., 4096) = 335 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 getuid() = 0 geteuid() = 0 getgid() = 0 getegid() = 0 open("/root/ldaprc", O_RDONLY) = -1 ENOENT (No such file or directory) open("/root/.ldaprc", O_RDONLY) = -1 ENOENT (No such file or directory) stat("/etc/ldap.conf", {st_mode=S_IFREG|0644, st_size=9119, ...}) = 0 geteuid() = 0 brk(0x1c566000) = 0x1c566000 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 open("/etc/hosts", O_RDONLY) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=187, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b85862a5000 read(4, "# Do not remove the following li"..., 4096) = 187 read(4, "", 4096) = 0 close(4) = 0 munmap(0x2b85862a5000, 4096) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 855948}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "\32 \1\0\0\1\0\0\0\0\0\0\4ldap\10answeron\3com\0\0"..., 35, MSG_NOSIGNAL, NULL, 0) = 35 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [104]) = 0 recvfrom(4, "\32 \205\200\0\1\0\1\0\1\0\0\4ldap\10answeron\3com\0\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 104 close(4) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 gettimeofday({1276265920, 858536}, NULL) = 0 poll([{fd=4, events=POLLOUT}], 1, 0) = 1 ([{fd=4, revents=POLLOUT}]) sendto(4, "I\375\1\0\0\1\0\0\0\0\0\0\4ldap\10answeron\3com\0\0"..., 35, MSG_NOSIGNAL, NULL, 0) = 35 poll([{fd=4, events=POLLIN}], 1, 5000) = 1 ([{fd=4, revents=POLLIN}]) ioctl(4, FIONREAD, [139]) = 0 recvfrom(4, "I\375\205\200\0\1\0\2\0\2\0\2\4ldap\10answeron\3com\0\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.10.20")}, [16]) = 139 close(4) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 4 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_INET, sin_port=htons(389), sin_addr=inet_addr("10.20.0.30")}, 16) = -1 EINPROGRESS (Operation now in progress) poll([{fd=4, events=POLLOUT|POLLERR|POLLHUP}], 1, 120000 And thats where it stops, right there after that last 120000.... Using strace, I can obviously CTRL+C to keep going. But like I said, normally the terminal completely freezes. Anyone have any clues?

    Read the article

  • Prepping the Raspberry Pi for Java Excellence (part 1)

    - by HecklerMark
    I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing. I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks: Load an OS onto an SD card Get the Pi connected to the network Load a JDK I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly. There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac): Plug SD card into reader on/in Mac Format it (FAT32) Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card) Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m) Eject the card from the Mac (diskutil eject diskn) There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi. Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one! Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least for my combination of Pi version, OS version, and uncanny gift of timing and luck there was. :-) Here is the sequence of steps I used to make the magic happen: Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity) Boot your Pi. On the first boot, do the following things: Opt to have it use all space on the SD card (will require a reboot eventually) Disable overscan Set your timezone Enable the ssh server Update raspi-config Reboot your Pi. This will reconfigure the SD to use all space (see above). After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved.  ;-) With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration. To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself! I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time! All the best, Mark 

    Read the article

  • Motorola Droid App Recommendations

    - by Brian Jackett
    Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

    Read the article

  • Using the SOA-BPM VIrtualBox Appliance

    - by antony.reynolds
    Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers.  My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box.  Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features.  In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access.  Make sure that the advanced settings for port forwarding allow access through the host to guest ports.  It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now.  Snapshots are one of the big benefits of putting a development environment into a virtualized environment.  I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite.  Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image.  I also use yum to update the OS to the latest binaries. So have fun.

    Read the article

  • Ubuntu 12.04 // Likewise Open // Unable to ever authenticate AD users

    - by Rob
    So Ubuntu 12.04, Likewise latest from the beyondtrust website. Joins domain fine. Gets proper information from lw-get-status. Can use lw-find-user-by-name to retrieve/locate users. Can use lw-enum-users to get all users. Attempting to login with an AD user via SSH generates the following errors in the auth.log file: Nov 28 19:15:45 hostname sshd[2745]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:15:45 hostname sshd[2745]: PAM adding faulty module: pam_winbind.so Nov 28 19:15:51 hostname sshd[2745]: error: PAM: Authentication service cannot retrieve authentication info for DOMAIN\\user.name from remote.hostname Nov 28 19:16:06 hostname sshd[2745]: Connection closed by 10.1.1.84 [preauth] Attempting to login via the LightDM itself generates similar errors in the auth.log file. Nov 28 19:19:29 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:29 hostname lightdm: PAM adding faulty module: pam_winbind.so Nov 28 19:19:47 hostname lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "DOMAIN\user.name" Nov 28 19:19:52 hostname lightdm: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:19:54 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:54 hostname lightdm: PAM adding faulty module: pam_winbind.so Attempting to login via a console on the system itself generates slightly different errors: Nov 28 19:31:09 hostname login[997]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:31:09 hostname login[997]: PAM adding faulty module: pam_winbind.so Nov 28 19:31:11 hostname login[997]: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:31:14 hostname login[997]: FAILED LOGIN (1) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info Nov 28 19:31:31 hostname login[997]: FAILED LOGIN (2) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info I am baffled. The errors obviously are correct, the file /lib/security/pam_winbind.so does not exist. If its a dependancy/required, surely it should be part of the package? I've installed/reinstalled, I've used the downloaded package from the beyondtrust website, i've used the repository, nothing seems to work, every method of installing this application generates the same errors for me. UPDATE : Hrmm, I thought likewise didn't use native winbind but its own modules. Installing winbind from apt-get uninstalls pbis-open (likewise) and generates failures when installing if pbis-open is installed first. Uninstalled winbind, reinstalled pbis-open, same issue as above. The file pam_winbind.so does not exist in that location. Setting up pbis-open-legacy (7.0.1.918) ... Installing Packages was successful This computer is joined to DOMAIN.LOCAL New libraries and configurations have been installed for PAM and NSS. Clearly it thinks it has installed it, but it hasn't. It may be a legacy issue with the previous attempt to configure domain integration manually with winbind. Does anyone have a working likewise-open installation and does the /etc/nsswitch.conf include references to winbind? Or do the /etc/pam.d/common-account or /etc/pam.d/common-password reference pam_winbind.so? I'm unsure if those entries are just legacy or setup by likewise. UPDATE 2 : Complete reinstall of OS fixed it and it worked seamlessly, like it was meant to and those 2 PAM files did NOT include entries for pam_winbind.so, so that was the underlying problem. Thanks for the assist.

    Read the article

  • How do I get sound output on HDMI without the need to start X?

    - by Magnus Hoff
    I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

    Read the article

  • New Rapid Install StartCD 12.2.0.48 for EBS 12.2 Now Available

    - by Max Arderius
    A new Rapid Install startCD (Patch 18086193) for Oracle E-Business Suite Release 12.2 is now available. We recommend that all EBS customers installing or upgrading to EBS 12.2 use this latest update. The startCD updates are distributed to customers via My Oracle Support Patch which can be uncompressed on top of any previous 12.2 startCD under the main staging area. This patch replaces any previous startCDs. What's New in This Update? This new startCD version 12.2.0.48 includes important fixes for multi-node Installs, RAC, pre-install checks, platform specific issues, and upgrade scenario failures: 18703814 - QREP:122:RI:ISSUE WITH CHECKOS.CMD 18689527 - QREP:122:RI:ISSUE WITH FNDCORE.DLL SHIPPED AS PART OF R122 PACKAGE 18548485 - QREP1224:4:JAR SIGNER ISSUE DUE TO THE RI UPGRADE AUTOCONFIG CHANGES 18535812 - QREP:1220.48_4: 12.2.0 UPGRADE FILE SYSTEM LAY OUT IS AFFECTING THE DB TABLES 18507545 - WIN: UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING RUNNING DB 18476041 - UNABLE TO LAY DOWN FS PRIOR TO 12.2 UPGRADE WITHOUT AFFECTING PRODUCTION DB 18459887 - R12.2 INSTALLATION FAILURE - OPMNCTL: NOT FOUND 18436053 - START CD 48_4 - ISSUES WITH TEMP SPACE CHECK 18424747 - QREP1224.3:ADD SERVER BROWSE BUTTON NOT WORKING 18421132 - *RW-50010: ERROR: - SCRIPT HAS RETURNED AN ERROR: 1 18403700 - QREP122.48:RI:UPGRADE RI PRECHECK HUNG IN SPLIT TIER APPS NODE ( NO SILENT ) 18383075 - ADD VERBOSE OPTION TO RAC VALIDATION 18363584 - UPTAKE INSTALL SCRIPTS FOR XB48_4 18336093 - QREP:122:RI:PATCH FS ADMIN SERVICE RUNNING AFTER RI UPGRADE CONFIGURE MODE 18320278 - QREP:1224.3:PLATFORM SPECIFIC SYNTAX ERRORS WITH DATE COMMAND IN DB CHECKER 18314643 - DISABLE SID=DB_NAME FOR RI UPGRADE FLOW IN RAC 18298977 - RI: EXCEPTION WHILE CLICKING RAC NODES BUTTON ON A NON-RAC SERVER 18286816 - QREP122:STARTCD48_3:TRAVERSING FROM VISION PASSW SCREEN TO PROD 18286371 - QREP122:STARTCD48_3:AMBIGUOUS MESSAGE DURING STAGE AREA CHECK ON HP 18275403 - QREP122:48:RI UPGRADE WITH EOH POST CHECKS HANGS IN SPLIT TIER DB NODE 18270631 - QREP122.48:MULTI-NODE RI USING NON-DEFAULT PASSWORDS NOT WORKING 18266046 - QREP122:48:RI NOT ALLOWING TO IGNORE THE RAC PRE-CHECK FAILURE 18242201 - UPTAKE TXK INSTALL SCRIPTS AND PLATFORMS.ZIP INTO STARTCD XB48_3 18236428 - QREP122.47:RI UPGRADE EXISTING OH FOR NON-DEFAULT APPS PASSWORD NOT WORKING 18220640 - INCONSISTENT DATABASE PORTS DURING EBS 12.2 INSTALLATION FOR STARTCD 12.2.0.47 18138796 - QREP122:47:RI 10.1.2 TECHSTACK NOT WORKING IF WE RUN RI FROM NEW STARTCD LOC 18138396 - TST1220: CONTROL FILE NAMING IN RAPID INSTALL SEEMS TO HAVE ISSUES 18124144 - IMPROVE HANDLING ERRORS FOUND IN CLUVFY LOG DURING PREINSTALL CHECKS 18111361 - VALIDATE ASM DB DATA FILES PATH AS +<DATA GROUP>/<PATH> 18102504 - QREP1220.47_5: UNZIP PANEL DOES NOT CREATE THE CORRECT STAGE 18083342 - 12.2 UPGRADE JAVA.NET.BINDEXCEPTION: CANNOT ASSIGN REQUESTED ADDRESS 18082140 - QREP122:47:RAC DB VALIDATION IS FAILS WITH EXIT STATUS IS 6 18062350 - 12.2.3 UPG: 12.2.0 INSTALLATION LOGS 18050840 - RI: UPGRADE WITH EXISTING RAC OH:SECONDARY DB NODE NAME IS BLANK 18049813 - RAC LOV DEFAULTS NOT SAVED UNLESS "SELECT" IS CLICKED 18003592 - TST1220:ADDITIONAL FREE SPACE CHECK FOR RI NEEDS TO BE CHECKED 17981471 - REMOVE ASM SPACE CHECK FROM RACVALIDATIONS.SH 17942179 - R12.2 INSTALL FAILING AT ADRUN11G.SH WITH ERRORS RW-50004 & RW-50010 17893583 - QREP1220.47:VALIDATION OF O.S IN RAPIDWIZ IN THE DB NODE CONFIGURATION SCREEN 17886258 - CLEANUP FND_NODES DURING UPGRADE FLOW 17858010 - RI POST INSTALL CHECKS (SSH VERIFICATION) STEP IS FAILING 17799807 - GEOHR: 12.2.0 - ERRORS IN RAPIDWIZ AND ADCONFIG LOGS 17786162 - QREP1223.4:RI:SERVICE_NAMES IS PRINTED AS SERVICE_NAME IN RI SCREEN 17782455 - RI: CONFIRM DEFAULT APPS PASSWORD IN SILENT MODE KICKOFF 17778130 - RI:ADMIN SERVER TO BE UP ON PRIMARY MID-TIER IN MULTI-NODE UPGRADE FS CREATION 17773989 - UN-SUPPORTED PLATFORM SHOWS 32 BIT AS HARD-CODED 17772655 - RELEVANT MESSAGE DURING THE RAPDIWIZ -TECHSTACK 17759279 - VERIFICATION PANEL DOES NOT EXPAND TECHNOLOGY STACK 17759183 - BUILDSTAGE SCRIPT MENU NEEDS TO BE ADJUSTED 17737186 - DATABASE PRE-REQ CHECK INCORRECTLY REPORTS SUCCESS ON AIX 17708082 - 12.2 INSTALLATION - OS PRE-REQUISITES CHECK 17701676 - TST122: GENERATE WRONG S_DBSID FOR PATCH FILE SYSTEM AT PHASE PREPARE 17630972 - /TMP PRE-REQ INSTALLATION CHECK 17617245 - 12.2 VISION INSTALL FAILS ON AIX 17603342 - OMCS: DB STAGING COMPLAINS WHILE MOVING IT TO FINAL LOCATION 17591171 - OMCS: DB STAGING FAILS WITH FRESH INSTALL R12.2 17588765 - CHECKER VERSION AND PLUGIN VERSION 17561747 - BUILDSTAGE.SH FAILS WITH ERROR WHEN STAGE HOSTED ON 32BIT LINUX 17539198 - RAPID INSTALL NEEDS TO IGNORE NON-REQUIRED STAGE ELEMENTS 17272808 - APPS USERS THAT HAVE DEFAULT PASSWORD AFTER 12.2 RAPID INSTALL References 12.2 Documentation Library 1581299.1 : EBS 12.2 Product Information Center 1320300.1 : Oracle E-Business Suite Release Notes, Release 12.2 1606170.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for Release 12.2.3 1624423.1 : Oracle E-Business Suite Technology Stack and Applications DBA Release Notes for R12.TXK.C.Delta.4 and R12.AD.C.Delta.4 1594274.1 : Oracle E-Business Suite Release 12.2: Consolidated List of Patches and Technology Bug Fixes Related Articles Oracle E-Business Suite 12.2 Now Available startCD options to install Oracle E-Business Suite Release 12.2

    Read the article

  • Terminal Colors Not Working

    - by Matt Fordham
    I am accessing an Ubuntu 10.04.2 LTS server via SSH from OSX. Recently the colors stopped working. I think it happened while I was installing/troubleshooting RVM, but I am not positive. In .bashrc I uncommeneted force_color_prompt=yes, and when I run env | grep TERM I get TERM=xterm-color. But still no colors. Any ideas? Thanks! Here is the output of cat .bashrc # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' alias dir='dir --color=auto' alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi [[ -s "/usr/local/rvm/scripts/rvm" ]] && . "/usr/local/rvm/scripts/rvm"

    Read the article

  • How can I make sound work without starting X?

    - by Magnus Hoff
    I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

    Read the article

  • Type of computer for a developer on the road

    - by nabucosound
    Hi developers: I am planning to be traveling through eurasia and asia (russia, china, korea, japan, south east asia...) for a while and, although there are plenty of marvelous things to see and to do, I must keep on working :(. I am a python developer, dedicated mainly to web projects. I use django, sqlite3, browsers, and ocassionaly (only if I have no choice) I install postgres, mysql, apache or any other servers commonly used in the internets. I do my coding on vim, use ssh to connect, lftp to transfer files, IRC, grep/ack... So I spend most of my time in the terminal shells. But I also use IM or Skype to communicate with my clients and peers, as well as some other software (that after all is not mandatory for my day-to-day work). I currently work with a Macbook Pro (3 years old now) and so far I am very happy with the performance. But I don't want to carry it if I am going to be "on transit" for long time, it is simply huge and heavy for what I am planning to load in my rather small backpack (while traveling, less is more, you know). So here I am reading all kind of opinions about netbooks, because at first sight this is the kind of computer I thought I had to choose. I am going to use Linux for it, Microsoft is not my cup of tea and Mac is not available for them, unless I were to buy a Macbook air, something that I won't do because if I am robbed or rain/dust/truck loaders break it I would burst in tears. I am concerned about wifi performance and connectivity, I am going to use one of those linux distros/tools to hack/test on "open" networks (if you know what I mean) in case I am not in a place with real free wifi access and I find myself in an emergency. CPU speed should be acceptable, but since I don't plan to run Photoshop or expensive IDEs, I guess most of the time I won't be overloading the machine. Apart from this, maybe (surely) I am missing other features to consider. With that said (sorry about the length) here it comes my question, raised from a deep ignorance regarding the wars betweeb betbooks vs notebooks (I assume tablet PCs are not for programming yet): If I buy a netbook will I have to throw it away after 1 month on the road and buy a notebook? Or will I be OK? Thanks! Hector Update I have received great feedback so far! I would like to insist on the fact that I will be traveling through many different countries and scenarios. I am sure that while in Japan I will be more than fine with anything related to technology, connectivity, etc. But consider that I will be, for example, on a train through Russia (transsiberian) and will cross Mongolia as well. I will stay in friends' places sometimes, but most of the time I will have to work from hostel rooms, trains, buses, beaches (hey this last one doesn't sound too bad hehe!). I think some of your answers guys seem to focus on the geek part but loose the point of this "on the road" fact. I am very aware and agree that netbooks suck compared to notebooks, but what I am trying to do here is to find a balance and discover your experiences with netbooks to see first hand if a netbook will be a fail in the mid-long term of the trip for my purposes. So I have resumed the main concepts expressed here on this small list, in no particular order: keyboard/touchpad feel: I use vim so no need of moving mouse pointers that much, unless I am browsing the web, but intensive use of keyboard screen real state: again, terminal work for most of the time battery life: I think something very important weight/size: also very important looks not worth stealing it, don't give a shit if it is lost/stolen/broken: this may depend on kind of person, your economy, etc. Also to prevent losing work, I will upload EVERYTHING to the cloud whenever I'll have a chance. wifi: don't want to discover my wifi is one of those that cannot deal with half the routers on this planet or has poor connectivity. Thanks again for your answers and comments!

    Read the article

  • Ubuntu 12.04 LXC nat prerouting not working

    - by petermolnar
    I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

    Read the article

  • How to upgrade a remote server from 8.10 to newer version?

    - by DisgruntledGoat
    I have a remote server still running Ubuntu 8.10 9.04 that I can only access via SSH. If I run apt-get update I get a bunch of 404 errors on the packages. I've asked a few questions on Server Fault but got nowhere. Here's what I've done: Run apt-get update which returns errors like: Err http://gb.archive.ubuntu.com intrepid/main Packages 404 Not Found [and same for many other packages] Run do-release-upgrade which returns: Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Edited /etc/update-manager/release-upgrades and changed from Prompt=normal to Prompt=lts (as suggested here). Running do-release-upgrade after this returns: Checking for a new ubuntu release current dist not found in meta-release file No new release found (Updated) I have followed the advice in this question and changed /etc/apt/sources.list to refer to jaunty instead of intrepid. However, that distro is not online anymore either. A comment there says I have to upgrade in chronological order... So basically, it seems like I cannot upgrade because my current distro is out of date and not supported. Is there a way to upgrade direct to 10.x or 11.x? Note, as this is a server I only have command-line access. UPDATE 24/11: I have managed to upgrade from 8.10 to 9.04. Ubuntu's EOL Upgrades page provides some alternate URLs for apt sources. I also needed to update /var/lib/update-manager/meta-release to point to the old-releases server too. However, now I cannot upgrade from 9.04 to 9.10. Running do-release-upgrade produces the same error as #2 above, except it "Failed to fetch" (the URLs in meta-release are valid). The Ubuntu Jaunty upgrade page says it's necessary to upgrade using a CD image. I followed the instructions here, but it didn't work: A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade is now aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/tmp.JLhTwVUugb/karmic", line 7, in sys.exit(main()) File "/tmp/tmp.JLhTwVUugb/DistUpgradeMain.py", line 132, in main if app.run(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1590, in run return self.fullUpgrade() File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1506, in fullUpgrade if not self.doPostInitialUpdate(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 762, in doPostInitialUpdate self.quirks.run("PostInitialUpdate") File "/tmp/tmp.JLhTwVUugb/DistUpgradeQuirks.py", line 83, in run for plugin in self.plugin_manager.get_plugins(condition): File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 167, in get_plugins filenames = self.get_plugin_files() File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 120, in get_plugin_files basenames = [x for x in os.listdir(dirname) OSError: [Errno 2] No such file or directory: './plugins' It does say to report the bug, but since this is an old unsupported release I don't know if it's worth doing. However, is there a way round this, to upgrade from 9.04 to 9.10 (And then finally to 10.04 LTS.)

    Read the article

  • PHP-FPM stops responding and dies [migrated]

    - by user12361
    I'm running Drupal 6 with Nginx 1.5.1 and PHP-FPM (PHP 5.3.26) on a 1GB single core VPS with 3GB of swap space on SSD storage. I just switched from shared hosting to this unmanaged VPS because my site was getting too heavy, so I'm still learning the ropes. I have moderately high traffic, I don't really monitor it closely but Google Adsense usually record close to 30K page views/day. I usually have 50 to 80 authenticated users logged in and a few hundred more anonymous users hitting the Boost static HTML cache at any given moment. The problem I'm having is that PHP-FPM frequently stops responding, resulting in Nginx 502 or 504 errors. I swear I have read every page on the internet about this issue, which seems fairly common, and I've tried endless combinations of configurations, and I can't find a good solution. After restarting Nginx and PHP-FPM, the site runs really fast for a while, and then without warning it simply stops responding. I get a white screen while the browser waits on the server, and after about 30 seconds to a minute it throws an Nginx 502 or 504 error. Sometimes it runs well for 2 minutes, sometimes 5 minutes, sometimes 5 hours, but it always ends up hanging. When I find the server in this state, there is still plenty of free memory (500MB or more) and no major CPU usage, the control and worker PHP-FPM processes are still present, and the server is still pingable and usable via SSH. A reload of PHP-FPM via the init script revives it again. The hangups don't seem to correspond to the amount of traffic, because I observed this behavior consistently when I was testing this configuration on a development VPS with no traffic at all. I've been constantly tweaking the settings, but I can't definitively eliminate the problem. I set Nginx workers to just 1. In the PHP-FPM config I have tried all three of the process managers. "Dynamic" is definitely the least reliable, consistently hanging up after only a few minutes. "Static" also has been unreliable and unpredictable. The least buggy has been "ondemand", but even that is failing me, sometimes after as much as 12 to 24 hours. But I can't leave the server unattended because PHP-FPM dies and never comes back on its own. I tried adjusting the pm.max_children value from as low as 3 to as high as 50, doesn't make a lot of difference, but I currently have it at 10. Same thing for the spare servers values. I also have set pm.max_requests anywhere from 30 to unlimited, and it doesn't seem to make a difference. According to the logs, the PHP-FPM processes are not exiting with SIGSEGV or SIGBUS, but rather with SIGTERM. I get a lot of lines like: WARNING: [pool www] child 3739, script '/var/www/drupal6/index.php' (request: "GET /index.php") execution timed out (38.739494 sec), terminating and: WARNING: [pool www] child 3738 exited on signal 15 (SIGTERM) after 50.004380 seconds from start I actually found several articles that recommend doing a graceful reload of PHP-FPM via cron every few minutes or hours to circumvent this issue. So that's what I did, "/etc/init.d/php-fpm reload" every 5 minutes. So far, it's keeping the lights on. But it feels like a dreadful hack. Is PHP-FPM really that unreliable? Is there anything else I can do? Thanks a lot!

    Read the article

  • How can I work efficiently on a desktop sharing workflow?

    - by OSdave
    I am a freelance Magento developer, based in Spain. One of my clients is a Germany based web development company and they're asking me something I think it's impossible. OK, maybe not impossible but definitely not a preferred way of doing things. One of their clients has a Magento Entreprise installation, which is the paid (and I think proprietary) version of Magento. Their client has forbidden them to download the files from his server. My client is asking me now to study one particular module of the application in order to interact with it from a custom module I'll have to develop. As they have a read-only ssh access to their client's server, they came up with this solution: Set up a desktop/screen sharing session between one of their developer's station and mine, alongsides with a skype conversation. Their idea is that I'll say to the developer: show me file foo.php The developer will then open this foo.php file in his IDE. I'll have then to ask him to show me the bar method, the parent class, etc... Remember that it's a read-only session, so forget about putting a Zend_Debug::log() anywhere, and don't even think about a xDebug breakpoint (they don't use any kind of debugger, sic). Their client has also forbidden them to use any version control system... My first reaction when they explained to me this was (and I actually did say it outloud to them): Well, find another client. but they took it as a joke from me. I understand that in a business point of view rejecting a client is not a good practice, but I think that the condition of this assignment make it impossible to complete. At least according to my workflow. I mean, the way I work or learn a new framework/program is: download all files and copy of db on my pc create a git repository and a branch run the application locally use breakpoints use Zend_Debug::log() write the code and tests commit to git repo upload to (test/staging first if there is one, production if not) server I have agreed to try the desktop sharing session, although I think it will be a waste of time. On one hand I don't mind, they pay me for that time, but I know me and I don't like the sensation of loosing my time. On the other hand, I have other clients for whom I can work according to my workflow. I am about to say to them that I cannot (don't want to) do it. Well, I'll first try this desktop sharing session: maybe I'm wrong and it can actually work. But I like to consider myself as a professional, and I know that I don't know everything. So I try to keep an open mind and I am always willing to learn new stuff. So my questions are: Can this desktop-sharing workflow work? What should be done in order to take the most of it? Taking into account all the obstacles (geographic locations, no local, no git), is there another way for me to work on that project?

    Read the article

  • git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

    - by spuder
    My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

    Read the article

  • GIT repository layout for server with multiple projects

    - by Paul Alexander
    One of the things I like about the way I have Subversion set up is that I can have a single main repository with multiple projects. When I want to work on a project I can check out just that project. Like this \main \ProductA \ProductB \Shared then svn checkout http://.../main/ProductA As a new user to git I want to explore a bit of best practice in the field before committing to a specific workflow. From what I've read so far, git stores everything in a single .git folder at the root of the project tree. So I could do one of two things. Set up a separate project for each Product. Set up a single massive project and store products in sub folders. There are dependencies between the products, so the single massive project seems appropriate. We'll be using a server where all the developers can share their code. I've already got this working over SSH & HTTP and that part I love. However, the repositories in SVN are already many GB in size so dragging around the entire repository on each machine seems like a bad idea - especially since we're billed for excessive network bandwidth. I'd imagine that the Linux kernel project repositories are equally large so there must be a proper way of handling this with Git but I just haven't figured it out yet. Are there any guidelines or best practices for working with very large multi-project repositories?

    Read the article

  • Mixing NIO with IO

    - by Steffen Heil
    Hi Usually you have a single bound tcp port and several connections on these. At least there are usually more connections as bound ports. My case is different: I want to bind a lot of ports and usually have no (or at least very few) connections. So I want to use NIO to accept the incoming connections. However, I need to pass the accepted connections to the existing jsch ssh library. That requires IO sockets instead of NIO sockets, it spawns one (or two) thread(s) per connection. But that's fine for me. Now, I thought that the following lines would deliver the very same result: Socket a = serverSocketChannel.accept().socket(); Socket b = serverSocketChannel.socket().accep(); SocketChannel channel = serverSocketChannel.accpet(); channel.configureBlocking( true ); Socket c = channel.socket(); Socket d = serverSocket.accept(); However the getInputStream() and getOutputStream() functions of the returned sockets seem to work different. Only if the socket was accepted using the last call, jsch can work with it. In the first three cases, it fails (and I am sorry: I don't know why). So is there a way to convert such a socket? Regards, Steffen

    Read the article

  • fabric deploy problem

    - by alexarsh
    Hi, I'm trying to deploy a django app with fabric and get the following error: Alexs-MacBook:fabric alex$ fab config:instance=peergw deploy -H <ip> - u <username> -p <password> [192.168.2.93] run: cat /etc/issue Traceback (most recent call last): File "build/bdist.macosx-10.6-universal/egg/fabric/main.py", line 419, in main File "/Users/alex/Rabota/server/mx30/scripts/fabric/fab/ commands.py", line 37, in deploy checkup() File "/Users/alex/Rabota/server/mx30/scripts/fabric/fab/ commands.py", line 140, in checkup if not 'Ubuntu' in run('cat /etc/issue'): File "build/bdist.macosx-10.6-universal/egg/fabric/network.py", line 382, in host_prompting_wrapper File "build/bdist.macosx-10.6-universal/egg/fabric/operations.py", line 414, in run File "build/bdist.macosx-10.6-universal/egg/fabric/network.py", line 65, in __getitem__ File "build/bdist.macosx-10.6-universal/egg/fabric/network.py", line 140, in connect File "build/bdist.macosx-10.6-universal/egg/paramiko/client.py", line 149, in load_system_host_keys File "build/bdist.macosx-10.6-universal/egg/paramiko/hostkeys.py", line 154, in load File "build/bdist.macosx-10.6-universal/egg/paramiko/hostkeys.py", line 66, in from_line File "build/bdist.macosx-10.6-universal/egg/paramiko/rsakey.py", line 61, in __init__ paramiko.SSHException: Invalid key Alexs-MacBook:fabric alex$ I can't connect to the server via ssh. What can be my problem? Regards, Arshavski Alexander.

    Read the article

  • How to deploy on a remote machine using hudson's WAS Builder Plugin?

    - by Peter Schuetze
    I have a hudson build server (Windows) that does not have Websphere installed. I created a Hudson node that I connect to via SSH. I also installed the WAS Builder Plugin to run jython scripts on the AIX machine. The job that uses the WAS Builder Plugin is tied to the AIX box. I run into errors. Does anybody know, whether that setup might work or if a different setup will work for the WAS Builder Plugin? EDIT: I get following Error Message: [test] $ cmd /c call /tmp/hudson9035964108103168395.bat FATAL: command execution failed java.io.IOException: cmd: not found at java.lang.UNIXProcess.fullPath(UNIXProcess.java:372) at java.lang.UNIXProcess.<init>(UNIXProcess.java:178) at java.lang.ProcessImpl.start(ProcessImpl.java:114) at java.lang.ProcessBuilder.start(ProcessBuilder.java:466) at hudson.Proc$LocalProc.<init>(Proc.java:149) at hudson.Proc$LocalProc.<init>(Proc.java:121) at hudson.Launcher$LocalLauncher.launch(Launcher.java:633) at hudson.Launcher$ProcStarter.start(Launcher.java:268) at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:778) at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:754) at hudson.remoting.UserRequest.perform(UserRequest.java:114) at hudson.remoting.UserRequest.perform(UserRequest.java:48) at hudson.remoting.Request$2.run(Request.java:270) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:432) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:284) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690) at java.lang.Thread.run(Thread.java:810) Finished: FAILURE I am wondering whether that plugin can be executed on a slave, especially in my case where the master is on Windows and the slave on AIX.

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >