Search Results

Search found 22716 results on 909 pages for 'network architecture'.

Page 169/909 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Our wi-fi at work is ridiculously slow, will adding more range extenders improve it?

    - by john
    At work, we have two wireless networks (e.g., Work1 Work2); the Work2 is used downstairs and Work1 is used upstairs. However, both are notoriously slow. The connection is better when we are wired in, but unfortunately due to our building being very old and our company growing very fast, most employees are not seated near the walls where the ethernet cables are. I had Cox, our ISP, run a bandwidth utilization test and it doesn't seem like we are capping out on upstream/downstream, which leads me to believe that it's strictly an issue with the wireless networks (which were implemented before I got there). The wireless networks are both Apple Airport Extremes. Is there anything I can do to improve the situation for everyone? Speeds are extremely slow, and sometimes drops out.

    Read the article

  • scheduled task share permissions

    - by Enriquev
    Hello, I would like to know if there is a way I can share : \\server\Scheduled Tasks On server 2003 with normal users, cause as far as I can tell it seems only administrators can see this share, is there anyway I can change this share's permission and add users or groups? I know I can change permission on the jobs themselves, but normal users don't see the folder at all, so they cant access the jobs... Thank You.

    Read the article

  • Basic IP address structure

    - by dannymcc
    We currently have a few servers, around 30-40 workstations and 16 phones. Each device has a static IP address. As an example the standard settings for a new workstation is; IP: 192.168.1.XXX Subnet: 255.255.255.0 Gateway: 192.168.1.99 DNS: 192.168.1.50 As I am slowly exploring new server OS's and virtualisation etc. I am getting close to wanting a wider range of IP addresses. What I would like to do is seperate the devices by IP as follows: Servers 192.168.1.XXX Workstations 192.168.2.XXX Printers 192.168.3.XXX Phones 192.168.4.XXX VM's 192.168.5.XXX Is this a bad idea, or is this a common way of doing things? My biggest concern is the phones and subnet masks. The phones are managed by our provider although I have access to the server that runs them. Would I need to change the subnet mask to 255.255.0.0 on all devices? Or only those that change? For example, the phones don't need to connect to any other devices other than other phones and the phone server. So if I have the phones on 192.168.1.XXX with a subnet mask of 255.255.255.0 and then moved everything I had complete ownership/control of to 192.168.X.XXX with a new subnet mask of 255.255.0.0. Would that work?

    Read the article

  • CPU and Motherboard clock speeds

    - by NZHammer
    I have been doing some reading about CPU clock speeds and how CPU clock speeds are calculated. After reading several articles, I have come to the understanding that your CPU clock speed is determined by: CPU clock speed = cpu multiplier x mobo clock speed A few questions came about after reading this which I cannot seem to find the answer to anywhere: If the CPU clock speed is dependent upon the mobo clock speed, then how is the clock speed of the CPU predetermined upon buying the CPU (i.e. written on the box without knowing what mobo is being used)? After installation, does the CPU adjust it's multiplier based upon the mobo clock speed to achieve advertised speeds? For example, if the CPU clocks speed is advertised at 2.4GHz and the mobo clock speed is 100MHz, will the multiplier be automatically set to 24x? Why does mobo clock speed seem to not be very important / talked about? For example, when I search on Newegg, mobo clock speed never seems to be listed. When I search enthusiast forums and overclocking forums, mobo clock speed is rarely mentioned. To me, it seems like the mobo clock speed would be pretty important. If I am understanding things correctly, a lower mobo clock speed means that you CPU must work harder to achieve advertised clock speeds. I guess that I should stop there with the questions for now, as I may be asking my questions based on incorrect assumptions. Thanks!

    Read the article

  • Why is Transmission constantly active?

    - by Dov
    I am using Transmission (1.92, the latest version) in Mac OS X 10.6.2 Snow Leopard, and have noticed that, without any torrents (at all, not even paused), Little Snitch reports constant activity from it. What's going on? I'd always assumed when I saw that with Torrents loaded but inactive, it had to do with the DHT, or some such kind of scanning activity. But what could it be doing when no torrents are loaded at all?

    Read the article

  • Can I issue wireless clients with IP address on different subnet?

    - by Beanz
    We have a very standard setup with a Windows Server 2003 domain controller issuing IP addresses using DHCP. This works fine. Internet access is managed via Microsoft ISA Server 2006 Standard. Clients are required to authenticate and this works fine. We now need to provide wireless internet access to visitors for laptops, iPhones etc. We've bought a couple of Netgear access points so I was thinking we might be able to issue wireless clients connected to it with an IP address on a different subnet and then allow non-authenticated Internet access via the ISA Server for that IP range. Does that sound plausible? I'm not even sure if I can issue a different subnet to wireless clients.

    Read the article

  • Permission denied when running Rails app in VirtualBox Ubuntu guest with files on Windows host

    - by Ola Tuvesson
    I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared (Samba) from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents. But when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file) - why is that? Are there any major conceptual flaws with this approach? Would I be better off using the VBox "shared folders" function?

    Read the article

  • Problems accessing shared folder in Windows Server 2008

    - by Triynko
    In Windows Server 2008, I have a shared folder. For my username: NTFS permission (read/modify) Share Permissions (read/modify) Result when trying to access the share: I can traverse directory and read files, but I cannot write files. When I try to examine my effective permissions, it says "Windows can't calculate the effective permissions for [My Username]". The folder is owned by the Administrators group (the default), and NTFS read/write permissions are granted to my username, which is a member of the Administrators group. I notice that to make any changes to the folder locally require me to acknowledge a UAC prompt. Why does that prompt appear? I also tried creating a new group, giving it full NTFS permissions, and full control in the shared permissions, and added my username to the group. The result is even worse... I cannot even traverse the shared folder directories or read anything at all.

    Read the article

  • Can't connect to a share.

    - by AngryHacker
    Hello, I have a laptop with a Windows XP Tablet Edition installed. I have several users setup on the laptop (mostly me and my kids). When I try to connect to its administrative share via \DadLaptop\c$ from a Windows 2000 Professional machine, it prompts me for a user name and password. However, after I enter it, it always tells me "incorrect password or unknown username". As a test I setup another share, called "test" and tried to connect to that. It worked fine, didn't even ask me for a password, just connected to it and that's that. All the networking is wireless. I am connecting with an admin account (admin on the target computer). What am I missing? Why can't I connect to an administrative share?

    Read the article

  • Free Windows traffic monitor that can run a command when reaching a limit

    - by leromarinvit
    Does anyone know a free traffic monitor tool for Windows XP which can run a configurable program when reaching a limit? Hoo Net Meter and DU Meter can do that, but they both cost money. What I'm trying to do is throttle the connection when getting close to the monthly limit, so that watching YouTube or downloading large files isn't fun any longer, but e-mail or looking something up still work. The throttling part is settled, Traffic Shaper XP works nicely. I just need something to automatically call a batch script when reaching the limit.

    Read the article

  • Guide for installing Zenoss remote SSH monitoring plugin for Ubuntu

    - by normalocity
    I'm trying out Zenoss. I got it to monitor a test machine via SNMP - that was easy enough. Now I want to add another server that is remote, and I want to use the SSH plugin. I've been using this guide, but it skips a few steps for non-RedHat systems. I'm on Ubuntu. The steps I have down so far are: Install alien Convert the .rpm to a .deb file Use dpkg to install teh .deb file My issue: where to get the .rpm file in the first place?

    Read the article

  • Bash can't start a programme that's there and has all the right permissions

    - by Rory
    This is a gentoo server. There's a programme prog that can't execute. (Yes the execute permission is set) About the file $ ls prog $ ./prog bash: ./prog: No such file or directory $ file prog prog: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.2.5, dynamically linked (uses shared libs), not stripped $ pwd /usr/local/bin $ /usr/local/bin/prog bash: /usr/local/bin/prog: No such file or directory $ less prog | head ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel 80386 Version: 0x1 I have a fancy less, to show that it's an actual executable, here's some more data: $ xxd prog |head 0000000: 7f45 4c46 0101 0100 0000 0000 0000 0000 .ELF............ 0000010: 0200 0300 0100 0000 c092 0408 3400 0000 ............4... 0000020: 0401 0a00 0000 0000 3400 2000 0700 2800 ........4. ...(. 0000030: 2600 2300 0600 0000 3400 0000 3480 0408 &.#.....4...4... 0000040: 3480 0408 e000 0000 e000 0000 0500 0000 4............... 0000050: 0400 0000 0300 0000 1401 0000 1481 0408 ................ 0000060: 1481 0408 1300 0000 1300 0000 0400 0000 ................ 0000070: 0100 0000 0100 0000 0000 0000 0080 0408 ................ 0000080: 0080 0408 21f1 0500 21f1 0500 0500 0000 ....!...!....... 0000090: 0010 0000 0100 0000 40f1 0500 4081 0a08 ........@...@... and $ ls -l prog -rwxrwxr-x 1 1000 devs 725706 Aug 6 2007 prog $ ldd prog not a dynamic executable $ strace ./prog 1249403877.639076 execve("./prog", ["./prog"], [/* 27 vars */]) = -1 ENOENT (No such file or directory) 1249403877.640645 dup(2) = 3 1249403877.640875 fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE) 1249403877.641143 fstat(3, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 1249403877.641484 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3b8954a000 1249403877.641747 lseek(3, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) 1249403877.642045 write(3, "strace: exec: No such file or dir"..., 40strace: exec: No such file or directory ) = 40 1249403877.642324 close(3) = 0 1249403877.642531 munmap(0x2b3b8954a000, 4096) = 0 1249403877.642735 exit_group(1) = ? About the server FTR the server is a xen domU, and the programme is a closed source linux application. This VM is a copy of another VM that has the same root filesystem (including this programme), that works fine. I've tried all the above as root and same problem. Did I mention the root filesystem is mounted over NFS. However it's mounted 'defaults,nosuid', which should include execute. Also I am able to run many other programmes from that mounted drive /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 1 cpu MHz : 2992.692 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu tsc msr pae mce cx8 apic mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogmips : 5989.55 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Example of a file that I can run I can run other programmes on that mounted filesystem on that server. For example: $ ls -l ls -rwxr-xr-x 1 root root 105576 Jul 25 17:14 ls $ file ls ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped $ ./ls attr cat cut echo getfacl ln more ... (you get the idea) ... rmdir sort tty $ less ls | head ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1

    Read the article

  • Why BSNL 3G not opening some websites ? [closed]

    - by Sarang
    I am Sarang Dave from India. I am using BSNL 3G prepaid wireless broad band. When I have purchased it, it could open the website : http://stackoverflow.com But, now from last 2 months, I am unable to open this website. :( I have changed my DNS server to 8.8.8.8 & Alternate server to 8.8.4.4. This both are the free google dns servers. But, still facing the same problem. For reference : http://code.google.com/speed/public-dns/docs/using.html I am getting following error after loading : The server at stackoverflow.com is taking too long to respond. Please suggest the solution. For reference : Few websites not opening with BSNL 3g Husshhh!! Finally DNS issue solved In Pune By BSNL 3G team. BSNL 3G: Ya Sites will open now :P Thank you.

    Read the article

  • Rename a Network Printer win Win 7

    - by Alex
    Seems this is a common question but the answers regularly miss the point. I have a server. Server has some printers connected. Server has all drivers for x32 & x64 OS PLUS ALL DEFAULTS set. Server also manages print queue. I have many workstations, all need to use the printers. All NEED to have drivers print queue and DEFAULTS propagated from server. Now.... When I add the printers on the workstations, I get: "ABC Printer on SERVER123" I need something less long - just "ABC Printer" So how? Tip: Please don't show me how to change the name of your locally installed printer. I know how to do this - I am particularly interested in shared printers that look like "ABC Printer on SERVER123" Tip: Installing the driver with a local port wont cut it because then I loose the server propagated defaults, the driver updates and I need to run around with driver disks/confuse trembling users with hard things like choosing drivers. I am happy for a hack if there is no official way to do this in the group policy.... I tried looking in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers on the workstation machines but those are only local printers :( I can see the network printer details on the workstations here: HKEY_USERS[Some GUID]\Printers\Connections But there is nothing obvious like a description string... Can anyone help with this?

    Read the article

  • 32bit vs 64bit guest VM and RAM usage

    - by sims
    Why does a 32bit domU (Xen guest VM) use less RAM than a 64bit? Notes: The same software complied for a different arch(AMD64 vs. 686). Obviously this is Linux or BSD or something easily ported. Maybe this is also a good one for SO. I've read this is so. I can guess why, but I'd like to hear everyone's comments.

    Read the article

  • Terse, documented, correct way to create Kerberos-backed user shares in Greyhole

    - by MrGomez
    As a migration strategy away from Windows Home Server (which is currently out of support and intractable for our needs, for a variety of reasons), our little cloister of nerds has targeted Greyhole for our shared use at home. Despite the documentation's terseness, getting the system set up for simple, single-user operation isn't especially difficult, but this scenario fails to service our needs. Among other highlights of the system, we're attempting to emulate Integrated Windows Authentication (with Kerberos) and single-user shares to keep the Windows users in the house happy and well-supported. I'm aware of the underlying systems that go into Greyhole and understand how to set up per-user shares in Samba, but the documentation doesn't seem to support cases for Greyhole to sop up these directories as separate landing zones for replication. Enter my question: are both of these cases (IWA user authentication and user-partitioned personal shares) supported by Greyhole? If so, please cite or link the supporting documentation if it exists.

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • How can I enable anonymous access to a Samba share under ADS security mode?

    - by hemp
    I'm trying to enable anonymous access to a single service in my Samba config. Authorized user access is working perfectly, but when I attempt a no-password connection, I get this message: Anonymous login successful Domain=[...] OS=[Unix] Server=[Samba 3.3.8-0.51.el5] tree connect failed: NT_STATUS_LOGON_FAILURE The message log shows this error: ... smbd[21262]: [2010/05/24 21:26:39, 0] smbd/service.c:make_connection_snum(1004) ... smbd[21262]: Can't become connected user! The smb.conf is configured thusly: [global] security = ads obey pam restrictions = Yes winbind enum users = Yes winbind enum groups = Yes winbind use default domain = true valid users = "@domain admins", "@domain users" guest account = nobody map to guest = Bad User [evilshare] path = /evil/share guest ok = yes read only = No browseable = No Given that I have 'map to guest = Bad User' and 'guest ok' specified, I don't understand why it is trying to "become connected user". Should it not be trying to "become guest user"?

    Read the article

  • Bonjour/DNS Service Discovery queries

    - by senloe
    I'm trying to implement dns service discovery in my application (no, I'm not asking for a programmatic answer). What I believe is one of my big pain points is generating the query. I know I need to send out a multicast broadcast on port 5353 and want to look for devices of type _ipp._tcp and _print._tcp, but I don't know what the question section needs to look like. For example, in SSDP I sent out a query that looks like the following: "M-SEARCH * HTTP/1.1\r\n" "HOST: 239.255.255.250:1900\r\n" + "MAN: \"ssdp:discover\"\r\n" "ST: urn:schemas-upnp-org:device:Printer:1\r\n" "MX: 5000\r\n\r\n" From what I know about a DNS query I need to send something like: "_ipp.tcp,all,all" but I know there needs to be more. Any pointers to documentation, etc would be greatly appreciated! update rfc1035 appears to contain promising information re the message structure.

    Read the article

  • ProCurve network expansion

    - by Blue Warrior NFB
    I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no more 10GbE Ethernet connections from that device. This group of switches is not stacked (no stack directive). Sometime in the next two or three months I'll need to add a sixth, and I'm not sure how deep of a hole I'm in. Ideally I'd replace the core switch with something more capable and has more 10GbE ports. However, that's a major outage and that requires special scheduling. The two edge switches connected via fiber have dual-port 10GbE cards in them, so I could physically put another switch on the far end of one of those. I don't know how much of a good or bad idea that would be though. Is that too many segments between end-points? Some config-excerpts: Running configuration: ; J9147A Configuration Editor; Created on release #W.14.49 hostname "REDACTED-SW01" time timezone 120 module 1 type J9147A module 2 type J9008A module 3 type J9149A no stack trunk B1 Trk3 Trunk trunk B2 Trk4 Trunk trunk A1 Trk11 Trunk trunk A2 Trk12 Trunk vlan 15 name "VM-MGMT" untagged Trk2,Trk5,Trk7 ip helper-address 10.1.10.4 ip address 10.1.11.1 255.255.255.0 tagged 37-40,Trk3-Trk4,Trk11-Trk12 jumbo ip proxy-arp exit

    Read the article

  • How is the MTU is 65535 in UDP but ethernet does not allow frame size more than 1500 bytes

    - by nikku
    I am using a fast ethernet of 100 Mbps, whose frame size is less than 1500 bytes (1472 bytes for payload as per my textbook). In that, I was able to send and receive a UDP packet of message size 65507 bytes, which means the packet size was 65507 + 20 (IP Header) + 8 (UDP Header) = 65535. If the frame's payload size itself is maximum of 1472 bytes (as per my textbook), how can the packet size of IP be greater than that which here is 65535? I used sender code as char buffer[100000]; for (int i = 1; i < 100000; i++) { int len = send (socket_id, buffer, i); printf("%d\n", len); } Receiver code as while (len = recv (socket_id, buffer, 100000)) { printf("%d\n". len); } I observed that send returns -1 on i > 65507 and recv prints or receives a packet of maximum of length 65507.

    Read the article

  • Identical traffic

    - by Walter White
    Hi all, I am running an application server and logging all requests for analysis purposes later. One interesting trend I noticed last night was, I had a visitor from Texas on FIOS share identical traffic with bluecoat in California. What would cause the traffic to be identical? For every request the visitor made, bluecoat made one subsequently within milliseconds of his request. If it is caching, why would there be identical requests? Wouldn't it go through the cache / proxy on their end, and I would only see the proxied request? I'm just curious, this is an interesting pattern that shows similarities of a DDoS attack, but with far fewer resources. Is it possible that the visitor had malware on their computer? Any other ideas? Walter

    Read the article

  • few question about linux [closed]

    - by oneat
    Can I execute assembly files with all privileges (using ports)? Does the newest DSL (damn small Linux) works with winXP. (makes bootloader for it) And does it support downloading applications automatically ?

    Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >