Search Results

Search found 3469 results on 139 pages for 'broken harddrive'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 17/139 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Volume is no longer showing in Raid Controller BIOS and in Windows

    - by Gordon
    Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. From their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

    Read the article

  • I can't fix a broken image in Internet Explorer

    - by lewisqic
    Hi All, I have a broken image in IE that I can't seem to fix. I have tried everything I could think of so far. It works just fine in all browsers except IE. You can view the broken image here... http://74.53.164.152/~maury66/index.php?cPath=5_11 As you can see, all of the product images work except for the one for the product titled "Facial Hydrating Lotion - 120 ml/4 fl oz - For normal and oily skin types". Does anyone have any idea what would be causing this? Any advice or direction would be greatly appreciated.

    Read the article

  • Is my external hard drive dying?

    - by thatotherguy
    I keep getting this error lately when I try to copy large (200+ MB) files over to my external. Following this, the disk becomes unresponsive and I got to unplug it and plug it in again to work. The copy process also is unreasonably slow. It is worth noting that this happens on Windows too, so it's not the notorious "Error -36" bug OS X had prior to 10.6.3. The disk is a Western Digital 3200BMV. Any ideas?

    Read the article

  • Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

    - by Sootah
    I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

    Read the article

  • Fixing Windows install by connecting it's hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Fixing Windows install by connecting its hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Can I boot my notebook via eSata pci-xpress card?

    - by OliverS
    I would like to boot directly from an external hard disk to improve performance over my internal notebook hard disk. My notebook has no native eSata jack but a pci express card. As my BIOS doesn't support the card on boot time so no way directly booting it. My question is, is it possible to work around this issue by using an USB stick or similar with a boot loader like grub and if so, will this only work for Linux or Windows as well?

    Read the article

  • LMDE detects a wireless card, but can't use it

    - by Davidos
    LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

    Read the article

  • Why do firewire drives on Mac OS cause processes to go into uninterruptible wait?

    - by akraut
    I have a Western Digital My Passport Studio external hard drive. It works with either Firewire 800 or USB 2.0. I've noticed that when I have it connected to Firewire, after a few hours, processes on my Mac start to go into an uninterruptible wait state. Eventually the system becomes so hard locked that I can't even shut it down. I have Spotlight indexing of the drive disabled, and the mds process seems to be the one that triggers this eventual system collapse.

    Read the article

  • mdadm raid1 fails to resync

    - by JuanD
    Hello, I'm trying to solve this problem I'm having with an mdadm raid1. I have an ubuntu 9.04 server running on a software 2-drive raid1 with mdadm. Yesterday, one of the drives failed, and so I replaced it with a brand new drive of the same size. I removed the faulty drive, copied the partition from the remaining good drive to the new drive and then added it to the raid. It re-synced and the system worked fine, until the drive that hadn't failed, was also labeled failed. Now I had the raid running solely on the new drive. So I purchased another drive and repeated the procedure above. So now I had 2 brand new drives and the raid was syncing. However, after a few minutes I checked /proc/mdstat and the raid was no longer syncing. mdadm --detail /dev/md1 shows: (sdb is the first new drive, and sdc is the second new drive) root@dola:/home/jjaramillo# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Sat Dec 20 00:42:05 2008 Raid Level : raid1 Array Size : 974711680 (929.56 GiB 998.10 GB) Used Dev Size : 974711680 (929.56 GiB 998.10 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Jun 2 10:09:35 2010 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : bba497c6:5029ba0b:bfa4f887:c0dc8f3d Events : 0.5395594 Number Major Minor RaidDevice State 2 8 35 0 spare rebuilding /dev/sdc3 1 8 19 1 active sync /dev/sdb3 I've tried removing and re-adding the drive a few times, but the same thing happens. The raid fails to resync. I've looked at /var/log/messages, and found the following: Jun 2 07:57:36 dola kernel: [35708.917337] sd 5:0:0:0: [sdb] Unhandled sense code Jun 2 07:57:36 dola kernel: [35708.917339] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 2 07:57:36 dola kernel: [35708.917342] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor] Jun 2 07:57:36 dola kernel: [35708.917346] Descriptor sense data with sense descriptors (in hex): Jun 2 07:57:36 dola kernel: [35708.917348] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 Jun 2 07:57:36 dola kernel: [35708.917357] 00 43 9e 47 Jun 2 07:57:36 dola kernel: [35708.917360] sd 5:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed So it looks like there's some kind of error on sdb (the first new drive). My question is, what would be the best approach to get the raid up and running again? I've thought about dd'ing the /dev/md1 to a blank hard drive, then re-doing the raid from scratch and loading the data back, but there could be an easier solution.. Any help would be appreciated.

    Read the article

  • Dead USB flash drive

    - by Unsliced
    So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

    Read the article

  • Which Cardbus/PCMCIA -> USB card works with external hard drive?

    - by Carl
    I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

    Read the article

  • securing hard drive when users boot from usb external

    - by eshriek
    I supervise the use of a 'community' desktop computer. I would like to allow the use of the desktop via an external drive to a specific individual. How do I secure the internal hard drive so that no access is possible while using the external drive? Primarily I want to avoid accidental modification of the hard drive. The desktop runs Vista. The external is Ubuntu.

    Read the article

  • Sync 2 hard drives without being connected at the same time (Mac)

    - by Jef
    Hi, I've got a 2TB hard drive at home and one at work. I use my laptop to connect to them. I want these 2 hard drives to be exactly the same. But these hard drives will never be connected at the same time. Is this possible? It means that my laptop needs to track the changes AND copy all new files to its hard drive temporarily. My laptop should act as an intermediate between the 2 external hard drives. There are lots of syncing options if both drives are connected at the same time, but there seems to be no solution for my specific problem. Any ideas? FYI: I use a Mac.

    Read the article

  • Accessing a broken mdadm raid

    - by CarstenCarsten
    Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

    Read the article

  • Which particular file caused "Delayed write failed" error?

    - by user35020
    I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

    Read the article

  • External disk not working with Mac OS X 10.5

    - by ctx2002
    Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

    Read the article

  • Need recommendation: which USB card (PCMCIA) works with external hard drive?

    - by Carl
    I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

    Read the article

  • Is there a way to password protect my external drive and be compatible with both Windows and MAC?

    - by Stucko
    I have an external hard drive (HD-PXTU2 Series). I used it for more than 6 months now, what I liked about it was its password protect utility that comes together with the drive. However the problem is the password protect utility is not compatible with MAC ( I'l be regularly transferring data between MacOS and Windows). Is there a way to password protect my external drive which is compatible with both Windows and MacOS?

    Read the article

  • Cheap NAS for connecting a USB drive to the network

    - by olaeld
    I am looking for a cheap way of hooking up a USB drive to the LAN. This could be a router with a USB port, or possibly a more regular NAS device with a USB port. I am hoping to find something below $200. But if there is a device with "magical properties" I may be interested to hear about it anyway.

    Read the article

  • Installing Ubuntu on an External Drive

    - by Dom
    I am trying to install ububtu on an external drive. I am a programmer who wants to start using Linux. I downloaded the usb installer from the ubuntu website and followed all the steps. But when I get to the part where I have to setup the partitioning, it says an error when moving forward "No root file system is defined". I've been doing some research and I think that I have to partition the external drive but do not know how to do so. The problem is that I only want 20gb used from that external drive and let the rest be used for storage. I am also a musician and use Pro tools so I would like to keep all my files there, but I dont want ubuntu on my main hardrive since the external one is portable. I'd appreciate it also if you could provide me the steps.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >